SYNTAX_ERROR SM:EXEC
Very funny, was working fine and then suddenly hit this error. Tried to refresh service definition but with no luck!
Syntax error in program "/1AGS/AEAXI_______________015 "._
The following syntax error occurred in program "/1AGS/AEA_XI_______________015
" in include "/1AGS/AEA_XI_______________015 " in
line 614:
"Field "READ" is unknown. It is neither in one of the specified tables "
"nor defined by a "DATA" statement. "DATA" statement."
Job Name....... "SM:EXEC SERVICES 000000006410700"
Job Initiator.. "SOLMAN_ADMIN"
Job Number..... 16013700
any tips would be appreciated!
The that told Andorid is from this note, actually i have the same problem now and trying to solve it.
Note 1491227 - Adjustments to service content update from ST 700 SP 23:
Carry out the following steps depending on the symptom:
1. You can import the corresponding ST-SER Support Package that contains the new service. Alternatively, after you implement the attached corrections (or import ST 700 Support Package 25), you can call transaction AGS_UPDATE and choose "Register New Service", which is displayed if there are new SAP services. You can select the services that you are able to install from the list. Then save the list and return to the initial screen where the corresponding service content can then be downloaded and activated.
2. As of ST 700 Support Package 25 or after you implement this note, the report RAGS_DSWP_SERV_CONTENT_RESET allows you to download service content updates for older sessions, even if they come from older ST-SER releases. This can be done by calling the report and choosing the option "Download content of former sessions". When you execute the report, the system checks for all sessions in the specified time interval whether the service definitions of these services are in Solution Manager. If they are not, they are downloaded. Activation can then be carried out in transaction AGS_UPDATE.
3. Execute the report RAGS_DSWP_SERV_CONTENT_RESET and remove the service content update completely. Note that the downloads are also removed. You are then able to download and activate the service content again in transaction AGS_UPDATE or in the report RAGS_DSWP_SERV_CONTENT_UPDATE.
4. Execute the report RAGS_DSWP_SERV_CONTENT_RESET and remove the service content update completely. You must not delete the downloads. You are then able to download and activate the service content again in transaction AGS_UPDATE or in the report RAGS_DSWP_SERV_CONTENT_UPDATE.
update:
that report don't solve the problem for me:
after exec service the system return this exception: CX_DSVAS_API_CONTEXT_INSTANCE
Edited by: Lluis Salvador Suarez on Jul 28, 2011 8:56 PM
Similar Messages
-
Unable to open solution in Solution Manager - SM:EXEC SERVICES
Hello Experts!!
We have Solution Manager 3.2 SR1 on Solaris 10
We have confiured EWA report to be generated every week through the solution manager. The session data although gets generated for the service created in Solution manager but we are unable to download the EWA report as the automatic job SM:EXEC SERVICES fails with the job log as
Unable to open solution Test. (where the solution name is Test).
Message no. DSWP017
When the service processing is started explicitly it runs accordingly. Could you please let me know whether it is an authorisation issue or something else?
Thanks and Regards,
Karan ShahTake a look at the following notes that desribe the reason and
the solution for this issue:
SAP Note 525097 - Programs cannot be generated, SYNTAX_ERROR,
SM:EXEC SERVICES
SAP Note 611536 - Generation error in reports
(name pattern RDSVAS____00*)
SAP Note 727998 - Complete Replacement of Service Definitions
for SDCC/SDCCN
After applying the above Note SM:EXEC SERVICE background job
should run correctly again.
Please, first refresh the service definitions on the satelite system
and then, if the problem persists, on the Solution Manager system. -
Job SM:EXEC SERVICES gets cancelled with SYNTAX_ERROR
Hi,
The job which refreshes Service sessions (for Early Watch Alerts) in SolMan 4. gets cancelled with the message:
Syntax error in program "RDSVASAEA_ROOT_____________050 ".
I performed a syntax check on the program in the ABAP Editor and it gives the following result :
Field "BDLDLTRHOSTS001030" is unknown. It is neither in one of the
specified tables nor defined by a "DATA" statement. "DATA" statement.
Can you let me know, how to solve this problem.
My system is SolMan 4.0 SP 15 on Win 2003 with Oracle 10.2.
ST-SER and ST-ICO are with the latest support pkg level,
Regards,
Anil.These steps can be done easier as of Support Package Stack 15:
>
Amit Devale wrote:
> Step 1:
> Run report BDL_DELETE_ALL_TABLES via SE38 to delete all entries
> in the service definition tables
>
> Step 2:
> Execute a 'Refresh service definitions' task session in transaction
> SDCCN ->Task ->Create ->'Refresh service definitions'
>
> Step 3:
> Execute in transaction SE37 the function module "BDL_GENERATE_LOGFUNC
> _INCLUDES" and enter the value "ALL" in the 'OPTION' field.
Hi Amit,
Support Package Stack 15 of SAP Solution Manager does contain an update of SDCCN (shipped within ST-PI 2005_1_700 SP06.
[SAP Note 727998|www.service.sap.com/sap/support/notes/727998]
This offers an easy way to update the service definitions and to generate the logfunc Includes.
Step 0: Ensure that optimizer statistics exist for table D010INC.
Step 1-3 :You can use functionality in SDCCN to execute these steps.
Perform:
- Path: SDCCN -> Utilities -> Maintain Service Definitions
- Select 'Delete and Replace Service Definitions -> Confirm this selection
- Confirm that you want to delete the definitions
- Confirm that a new task 'Service Definition Refresh' was created
(Take a note of the task id -> Review the log for this task id when it is completed)
You should not not see any errors for either the update of a Service Definitions table or the generation of any re-import include.
Best regards,
Ruediger
P.S.: Great, that you start to share your rich experience here in SDN. -
Problem in SM:EXEC SERVICES job.
Hi Experts,1. SM:EXEC SERVICES job is getting cancelled in our solution manager system,
After checking the job log I found out that Job is getting cancelled with ABAP dump SYNTAX_ERROR
2. I checked for the ABAP dump and found that job is getting dump when trigerring Standard SAP program
RDSVASCEW_DBORA____________060. I checked for any OSS notes in service market place but could not fix...
3. I tried manually doing syntactical check for the program but it is getting syntax error in
INCLUDE report "/1CAGTF/IF_LOGFUNC_000498" not found.
If some body could advice on the issue, it would be great help !! Thanks
Let me know if I need to provide more details on the problem.
Regards, Amber S>
Ruediger Stoecker wrote:
> This is not required for the mentioned dump. The dump pattern is well known
>
> Just follow the instructions of SAP Note 727998 (which has been already recommended above). It's the standard answer and it's always recommended. It will solve the SYNTAX_ERROR.
If the dump pattern is well known, the reason behind the dump or to replace service definitions should have been explained.
Some of the programs (e.g.'RDSVASAEW_ROOT_____________027', 'RDSVASAEW_DBORA____________032') used in the SAP Solution Manager cannot be generated anymore. During the attempt to generate them, the system generates the following error: 'GEN_TOO_MANY_CBS, generation error: Too many DATA control blocks generated', 'Field "OMS_VERSIONS000910" unknown'.
Check this note.
525097
-=-Ragu -
SM: EXEC SERVICES Job is Cancelling
Hello everyone-
I have seen a few posts about this job cancelling however I haven't been able to gather a solution from what I have read. After appling SP15 in our Solution Manager system, the SM: EXEC SERVICES job is failing.
We sent a note off to SAP and they responded back with the instruction to implement notes 611536 and 727998. We have held off on implementing them because they seem awfully involved in order to correct a cancelled batch job. Has anyone implemented these notes? If so, did it solve this problem?
Here are the details from ST22:
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "RDSVASAEW_DBUDB____________057
" in include "RDSVASAEW_DBUDB____________057 " in
line 61:
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000300" not found"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
Any ideas?>
Nathaniel Williams wrote:
> Hello everyone-
> We sent a note off to SAP and they responded back with the instruction to implement notes 611536 and 727998. We have held off on implementing them because they seem awfully involved in order to correct a cancelled batch job.
>Has anyone implemented these notes? If so, did it solve this >problem?
Hi Nathaniel,
just follow the instructions of SAP Note 727998. It's the standard answer and is always recommended.
It will solve the mentioned SYNTAX_ERROR.
Just search for this note in the forum.
Best regards,
Ruediger (also from SAP) -
Solution Manager - Error when executing Job SM:EXEC SERVICES
Hi,
I am trying to get the data from the earlywatch alert report and when i start the job SM:EXEC SERVICES.
The jobs starts but i get an error during is execucion:
Runtime errors SYNTAX_ERROR
Occurred on 17.01.2008 at 14:06:28
Syntax error in program "RDSVASAEW_DBMSS____________052 ".
What happened?
The following syntax error occurred in the program
RDSVASAEW_DBMSS____________052 :
"INCLUDE report "/1CAGTF/IF_LOGFUNC_000208" not found."
Error in ABAP application program.
The current ABAP program "SAPLDSVAS_PROC" had to be terminated because one of
the
statements could not be executed.
This is probably due to an error in the ABAP program.
I tried to generate all the function modules and i get this error:
Logical function: MSQ_TEMPDB_DOWNLOAD :
Error 1 during generation of /1CAGTF/IF_LOGFUNC_000208
Syntax error.
Can you help me on this error?
Best regards,
Nuno SilvaHi Pedro,
I insert my answer from a similar thread.
As a pitty, that's a well known error.
Please check [SAP Note 727998|http://service.sap.com/sap/support/notes/727998]
Basically, these three steps needs to be performed:
1) BDL_DELETE_ALL_TABLES
2) SDCCN - Refresh Service Definitions
3) Generate Logfuncs
SE37: /BDL/_GENERATE_LOGFUNCINCLUDES
OPTION: ALL
It's also described in the Implementation Guide (IMG), transaction SPRO in the SAP Solution Manager system:
SAP Solution Manager -> Configuration -> Basic Settings -> Standard Configuration of Basic Settings -> Solution Manager -> Service Data Control Center
-> Activate the Service Data Control Center in the Solution Manager
-> Generate Includes for Service Data Contol Center
With the next ST-PI Support Package. The steps can be triggered via the menu of transaction SDCCN.
Best regards,
Ruediger Stoecker -
Every time I start iTunes I get the message: "iTunes exec has been set to run in compatability mode for an older version of Windows. Turn off compatability mode for iTunes before you open it." How do I turn off the compatability mode? Particularly when I have to do it before I turn on iTunes.
Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode -
SQL error 3113 occurred when executing EXEC SQL.
Hi,
We are facing one typical problem, One background is failing regularly with
below dump. as we now got all notes giving information, if database restarted
taking backup, these type of failures occur, but our database is only down for backup once in a week, but it is failing with frequenly.
in this two servers are located in different place, in this job tries to connect
another server to get material statistics.
It is giving some error message in sm21 with
SQL error 3113 occurred when executing EXEC SQL.
work procees in reconnect mode.
all notes saying these types of dump occur when database restared, but this dump
even though database is up.
below is short dump, please can anyone help me from this problem.
ABAP runtime errors DBIF_DSQL2_SQL_ERROR
Occurred on 08.01.2007 at 00:30:28
>> Short dump has not been completely stored. It is too big.
SQL error 3113 occurred when executing EXEC SQL.
What happened?
The error occurred in the current database connection "AZ1".
What can you do?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Error analysis
How to correct the error
Database error text........: "ORA-03113: end-of-file on communication channel#"
Triggering SQL statement...: "select mara.groes, mara.brgew, mara.ntgew,
mara.gewei, mara.volum, mara.voleh, mara.mstae, mara.mstde, mara.prdha,
marc.matnr, marc.werks, marc.mmsta, marc.mmstd from sapr3.mara, sapr3.m
where sapr3.mara.mandt = sapr3.marc.mandt and sapr3.mara.matnr =
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"DBIF_DSQL2_SQL_ERROR"
"ZM2431216 " or "ZM2431216 "
"EXTRACT_GENERAL_DATA"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in th
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error o
or which actions and input led to the error.
System environment
SAP Release.............. "46C"
Application server....... "essceu3"
Network address.......... "172.19.119.198"
Operating system......... "AIX"
Release.................. "5.3"
Hardware type............ "00C7ADBD4C00"
Database server.......... "ukblx176"
Database type............ "ORACLE"
Database name............ "EU3"
Database owner........... "SAPR3"
Character set............ "es_ES.ISO8859-1"
SAP kernel............... "46D"
Created on............... "Jul 9 2006 20:26:33"
Created in............... "AIX 1 5 00447C4A4C00"
Database version......... "OCI_920__OCI_7_API "
Patch level.............. "2257"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.0.5.., ORACLE 8.0.6.., ORACLE
8.1.6.., ORACLE 8.1.7.., ORACLE 9.2.0.., ORACLE 10.2.0.."
SAP database version..... "46D"
Operating system......... "AIX 1 4, AIX 2 4, AIX 3 4, AIX 1 5, AIX 2 5, AIX 3
5, , System build information:, , LCHN :
841480"
User, transaction...
Client.............. 600
User................ "MPZMMES"
Language key........ "S"
Transaction......... " "
Program............. "ZM2431216 "
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where termination occurred
The termination occurred in the ABAP/4 program "ZM2431216 " in
"EXTRACT_GENERAL_DATA".
The main program was "ZM2431216 ".
The termination occurred in line 980
of the source code of program "ZM2431216 " (when callin
The program "ZM2431216 " was started as a background jo
Source code extract
009500 mara.ntgew,
009510 mara.gewei,
009520 mara.volum,
009530 mara.voleh,
009540 mara.mstae,
009550 mara.mstde,
009560 mara.prdha,
009570 marc.matnr,
009580 marc.werks,
009590 marc.mmsta,
009600 marc.mmstd
009610 into :w_ops-groes,
009620 :w_ops-brgew,
009630 :w_ops-ntgew,
009640 :w_ops-gewei,
009650 :w_ops-volum,
009660 :w_ops-voleh,
009670 :w_ops-mstae,
009680 :w_ops-mstde,
009690 :w_ops-prdha,
009700 :w_ops-matnr,
009710 :w_ops-werks,
009720 :w_ops-mmsta,
009730 :w_ops-mmstd
009740 from sapr3.mara, sapr3.marc
009750 where sapr3.mara.mandt = sapr3.marc.mandt
009760 and sapr3.mara.matnr = sapr3.marc.matnr
009770 and sapr3.mara.mandt = :p_mandt
009780 and sapr3.mara.matnr = :w_ebs-matnr
009790 and sapr3.marc.werks = :p_owerks
> ENDEXEC.
009810 endform. " extract_general_data
009820 *&
009830 *& Form append_i_ops
009840 *&
009850 * Appends W_OPS to I_OPS
009860 *
009870 form append_i_ops.
009880 append w_ops to i_ops.
009890 endform. " append_i_ops
009900 *&
009910 *& Form extract_material_description
009920 *&
009930 * Extracts a Material Description from the remote database an
009940 * modifies the current record in I_OPS.
009950 *
009960 * >P_SPRAS Language Key
009970 *
009980 form extract_material_description using p_spras.
009990 EXEC sql performing set_langauge.
Contents of system fields
SY field contents..................... SY field contents............
SY-SUBRC 0 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1
SY-FDPOS 18 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1........2........3....+..
W_EBS-PRAT4
2
0
W_OPS-GROES
22222222222222222222222222222222
00000000000000000000000000000000
W_OPS-BRGEW #######
0000000
000000C
W_OPS-NTGEW #######
0000000
000000C
regards,
krishnaiah.Hi,
This is usually a SERVER SIDE DATABASE PROBLEM or SQLNET LISTENER (server side) PROBLEM. The client side should initially be ignored and instead the server should be investigated. In rare cases, this can be caused by client
side memory or other resource problem, or a DLL version mismatch, but this is
unlikely.
Enlist the assistance of your DBA. Then reproduce the ORA-3113 error on your
client application. Ask your DBA to look at the database side Alert.log and
trace files and look for ANY activity. Any activity that coincides with your
ORA-3113 will be a clue.
REgards
Vinod -
Getting Short dump When Executing MIGO: SYNTAX_ERROR
Please Help,
I am getting this dump, when i hit MIGO transaction
Runtime Errors SYNTAX_ERROR
Date and Time 10.12.2008 08:28:03
Short text
Syntax error in program "MB_MIGO_BADI==================CP ".
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"MB_MIGO_BADI==================CP " in include
"MB_MIGO_BADI==================CM000 " in
line 0:
"The specified type cannot be converted into the target variables."
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "MB_MIGO_BADI==================CP
You can also perform the syntax check from the ABAP Editor.
If the problem persists, proceed as follows:
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
The following syntax error was found in the program
MB_MIGO_BADI==================CP :
"The specified type cannot be converted into the target variables."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "DMATE"
Network address...... "140.1.1.141"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "dmate"
Database type..... "ADABAS D"
Database name..... "AD0"
Database user ID.. "SAPAD0"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Jun 23 2008 00:09:46"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "SQLDBC 7.6.0.018 CL 119055 "
Patch level. 166
Patch text.. " "
Database............. "MaxDB 7.6, MaxDB 7.7"
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Memory consumption
Roll.... 16192
EM...... 8379680
Heap.... 0
Page.... 40960
MM Used. 1627776
MM Free. 2559440
User and Transaction
Client.............. 040
User................ "LAKSHMI"
Language key........ "E"
Transaction......... "MIGO "
Transactions ID..... "EE72C6DDC96BF1F99FA4001143E563CA"
Program............. "CL_EX_MB_MIGO_BADI============CP"
Screen.............. "SAPLMIGO 0001"
Screen line......... 2
Information on where terminated
Termination occurred in the ABAP program "CL_EX_MB_MIGO_BADI============CP" -
in "IF_EX_MB_MIGO_BADI~INIT".
The main program was "SAPLMIGO ".
In the source code you have the termination point in line 1
of the (Include) program "CL_EX_MB_MIGO_BADI============CM001".
Source Code Extract
Line SourceCde
>>>>> method IF_EX_MB_MIGO_BADI~INIT.
2 CLASS CL_EXIT_MASTER DEFINITION LOAD.
3
4 DATA l_badi TYPE REF TO MB_MIGO_BADI.
5
6
7
8
9
10 TRY.
11
12 GET BADI l_badi
13 CONTEXT me.
14
15 CALL BADI l_badi->INIT
16
17 CHANGING
18 CT_INIT = CT_INIT.
19
20
Contents of system fields
Name Val.
SY-SUBRC 0
SY-INDEX 0
SY-TABIX 1
SY-DBCNT 1
SY-FDPOS 1
SY-LSIND 0
SY-PAGNO 0
SY-LINNO 1
SY-COLNO 1
SY-PFKEY
SY-UCOMM
SY-TITLE
SY-MSGTY S
SY-MSGID VBDOCUBATCH
SY-MSGNO 001
SY-MSGV1
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO 0
SY-DATUM 20081210
SY-UZEIT 082802
SY-XPROG
SY-XFORM
Active Calls/Events
No. Ty. Program Include Line
Name
4 METHOD CL_EX_MB_MIGO_BADI============CP CL_EX_MB_MIGO_BADI============CM001 1
CL_EX_MB_MIGO_BADI=>IF_EX_MB_MIGO_BADI~INIT
3 METHOD SAPLMIGO LMIGOGL2 54
LCL_MIGO_GLOBALS=>CLASS_CONSTRUCTOR
2 FORM SAPLMIGO LMIGOIN1 11
INITIALIZATION
1 MODULE (PBO) SAPLMIGO LMIGOPBO 11
PBO_INITILIZATION
Chosen variables
Name
Val.
No. 4 Ty. METHOD
Name CL_EX_MB_MIGO_BADI=>IF_EX_MB_MIGO_BADI~INIT
CT_INIT
Table[initial]
%_DUMMY$$
2222
0000
0000
0000
SYST-REPID
CL_EX_MB_MIGO_BADI============CP
4454554454444544443333333333334522222222
3CF58FD2FD97FF2149DDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-SUBRC
0
0000
0000
No. 3 Ty. METHOD
Name LCL_MIGO_GLOBALS=>CLASS_CONSTRUCTOR
SY-REPID
SAPLMIGO
5454444422222222222222222222222222222222
310CD97F00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
LCL_MIGO_GLOBALS=>CNTL_ERROR
2
0
0
0
ABAP_FALSE
2
0
0
0
SYST-REPID
SAPLMIGO
5454444422222222222222222222222222222222
310CD97F00000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
GOSEARCH_PO
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
TEXT-220
Dest
46772222
45340000
00000000
00000000
%_SPACE
2
0
0
0
%_TAG*TS_GOITEM
<initial>
<initial>
<initial>
X
X
5
8
0
0
LCL_MIGO_GLOBALS=>IF_BADI
F0000000
70008000
%_FL2*TV_GOFREIGHT
<initial>
<initial>
<initial>
%_PRINT
000 0###
2222333222222222222222222222222222222222222222222222222222222222222222222222222222222222223000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
LCL_MIGO_GLOBALS=>T_BADI
Table[initial]
/SPE/CL_INB_ACTION_INFO=>C_DIALOG_MIGO
SCREEN
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OREF_TITLEBAR
F0000000
F0000000
L_BADIS_1
0
0000
0000
SY-MSGID
VBDOCUBATCH
54444544544222222222
624F3521438000000000
00000000000000000000
00000000000000000000
OREF_TIP
F0000000
F0000000
TV_GOSERIAL-CX
<initial>
<initial>
<initial>
SPACE
2
0
0
0
SY-MSGNO
001
333
001
000
000
No. 2 Ty. FORM
Name INITIALIZATION
OREF_ARCH
F0000000
F0000000
LCL_MIGO_GLOBALS=>KERNEL
F0000000
D0002000
%_CX_TABLEVIEW_VERSION
0
3
0
0
0
GODEFAULT-DEF_XBOM
2
0
0
0
LCL_MIGO_GLOBALS=>KERNEL->C_REFDOCTYPE_MATDOC
MAT
445
D14
000
000
No. 1 Ty. MODULE (PBO)
Name PBO_INITILIZATION
GOITEM-UMWRK
2222
0000
0000
0000
GOITEM-UMNAME1
222222222222222222222222222222
000000000000000000000000000000
000000000000000000000000000000
000000000000000000000000000000
Internal notes
The termination was triggered in function "ab_genprog"
of the SAP kernel, in line 1551 of the module
"//bas/700_REL/src/krn/runt/abgen.c#10".
The internal operation just processed is "CPOP".
Internal mode was started at 20081210082802.
Program name.........: "MB_MIGO_BADI==================CP ".
Error message........: "The specified type cannot be converted into the target
variables.".
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=5776)
When : 12/10/2008 8:28:3.84
Threads : 2
Computer Name : DMATE
User Name : SAPServiceAD0
Number of Processors: 4
Processor Type: EM64T Family 15 Model 4 Stepping 1
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 14f0
FramePtr ReturnAd Param#1 Function Name
0000000007eb8800 0000000077d7047f 00000000411b4070 ntdll!NtWaitForSingleObject
0000000007eb88a0 000000000173b1d1 000000000000042c kernel32!WaitForSingleObjectEx
0000000007eb8af0 00000000006179c5 0000000000000001 disp+work!NTDebugProcess [ntstcdbg.c (501)]
0000000007eb8b20 0000000000b05d9c 0000000000000001 disp+work!CTrcStack [dptstack.c (182)]
0000000007eb8b70 0000000000b0afc0 0000000000000001 disp+work!rabax_CStackSave [abrabax.c (7093)]
0000000007eb9550 0000000000a51c94 0000000001d12320 disp+work!ab_rabax [abrabax.c (1231)]
0000000007ebc220 00000000007f753a 0000000000000001 disp+work!ab_genprog [abgen.c (1555)]
0000000007ebc2f0 00000000007f7dc8 00000000ffffffff disp+work!newload [abload1.c (336)]
0000000007ebc350 00000000007f7e8e 0000000000000056 disp+work!ab_LoadProgOrTrfo [abload1.c (160)]
0000000007ebc380 00000000007bc84d 000007fe725a5f70 disp+work!ab_LoadProg [abload1.c (78)]
0000000007ebc450 00000000007be91a 00002a441022f402 disp+work!LoadGlobalClass [abobject.c (943)]
0000000007ebc4a0 00000000007c1bdd 0000000000000000 disp+work!ab_FillCfix [abobject.c (1603)]
0000000007ebc580 000000000083ae52 0000000000000000 disp+work!ab_jaboo [abobject.c (2248)]
0000000007ebc700 0000000000a1ccb7 000000000000000d disp+work!ab_extri [abextri.c (554)]
0000000007ebc750 0000000000ad50ac 000000000000000d disp+work!ab_xevent [abrunt1.c (281)]
0000000007ebc7e0 0000000000679328 000000000000000d disp+work!ab_dstep [abdynpro.c (492)]
0000000007ebc960 000000000067d02d 000007fe725d6f20 disp+work!dynpmcal [dymainstp.c (2396)]
0000000007ebc9f0 000000000067ca2a 0000000000000000 disp+work!dynppbo0 [dymainstp.c (543)]
0000000007ebcaa0 00000000006395c5 0000000000000000 disp+work!dynprctl [dymainstp.c (360)]
0000000007ebfc30 00000000004dbc4c 000000000000000c disp+work!dynpen00 [dymain.c (1646)]
0000000007ebfeb0 000000000042f096 0000000007f62ff0 disp+work!TskhLoop [thxxhead.c (4538)]
0000000007ebfee0 000000000040108d ffffffff00000003 disp+work!DpMain [dpxxdisp.c (1136)]
0000000007ebff10 00000000019e84b1 0000000000000000 disp+work!nlsui_main [thxxanf.c (84)]
0000000007ebff70 0000000077d5966c 0000000000000000 disp+work!wmainCRTStartup [crtexe.c (498)]
0000000007ebffa0 0000000000000000 00000000019e8340 kernel32!BaseProcessStart
State Dump for Thread Id b94
FramePtr ReturnAd Param#1 Function Name
000000000c9dfe40 0000000077d5f651 0000000000000000 ntdll!NtFsControlFile
000000000c9dfeb0 00000000018ce23f fffffffffffffffe kernel32!ConnectNamedPipe
000000000c9dff40 000007ff7fc411c4 0000000000000000 disp+work!SigIMsgFunc [signt.c (679)]
000000000c9dff70 0000000077d6b69a 0000000077d6b660 msvcrt!endthreadex
000000000c9dffa0 0000000000000000 0000000000000000 kernel32!BaseThreadStart
List of ABAP programs affected
Index Typ Program Group Date Time Size Lang.
0 Prg SAPLMIGO 0 04.05.2008 12:54:34 1561600 E
1 Prg SAPMSSYD 0 25.02.2008 17:02:32 21504 E
2 Prg SAPFSYSCALLS 0 09.09.2004 14:18:32 7168 E
3 Prg CL_MMIM_USERDEFAULTS==========CP 3 06.05.2002 10:42:38 21504 E
4 Typ ESDUS 0 01.03.1999 13:36:04 2048
5 Typ GOHEAD 0 07.02.2006 10:07:36 11264
6 Typ MKPF 0 25.08.2005 22:02:19 7168
7 Typ KBEFU 0 16.03.2008 17:46:49 6144
8 Typ LFA1 0 16.03.2008 17:47:20 22528
9 Typ MIGO_CUST_ACTION 0 30.11.1999 10:19:14 3072
10 Typ MIGO_CUST_REFDOC 0 30.11.1999 10:19:14 2048
11 Typ X031L 0 05.07.2005 13:10:15 6144
12 Prg SAPLSDIFRUNTIME 12 19.11.2006 16:35:34 96256 E
13 Typ DFIES 0 28.12.2004 17:06:45 10240
14 Prg SAPLSDNT 14 09.03.2008 19:02:04 219136 E
15 Prg SAPLSUGS 15 31.03.2006 11:23:11 47104 E
16 Prg SAPLV01D 16 24.03.2008 17:03:30 40960 E
17 Typ IWRKZ 0 04.04.1995 15:56:46 2048
18 Typ TCUCH 0 07.01.2002 15:50:54 3072
19 Typ TCUBN 0 07.01.2002 15:50:53 2048
20 Typ TCUWS 0 13.08.1997 13:57:58 2048
21 Typ TCUDRV 0 07.01.2002 15:50:54 2048
22 Prg SAPLVBDOCUBATCH_BF 22 16.01.2004 14:28:56 10240 E
23 Typ TCUDB 0 14.01.2004 10:05:59 2048
24 Prg CL_GUI_CFW====================CP 24 28.02.2005 21:03:09 168960 E
25 Prg CL_GUI_PROPS_CONSUMER=========CP 25 18.03.2008 13:25:33 29696 E
26 Prg %_CCNTL 25 18.02.2005 14:15:08 15360 E
27 Prg SAPLTHFB 27 18.03.2008 13:24:52 394240 E
28 Typ EUDB 0 06.11.2003 20:28:08 8192
29 Typ TCURM 0 01.03.2005 10:56:26 5120
30 Prg CL_EXITHANDLER================CP 30 18.03.2008 13:11:35 30720 E
31 Prg SAPLSEXV 31 18.03.2008 13:12:58 117760 E
32 Typ SXS_ATTR 0 07.02.2006 10:09:24 5120
33 Typ BADIISIMPLED 0 19.05.2005 19:10:34 3072
34 Prg CL_ENH_BADI_TOOL_UTILITIES====CP 34 17.03.2008 11:03:36 13312 E
35 Typ BADI_MAIN 0 08.12.2004 18:01:11 2048
36 Typ BADI_IMPL 0 09.12.2004 19:05:43 3072
37 Typ TADIR 0 07.02.2006 10:08:38 5120
38 Prg CL_SWITCH=====================CP 38 17.03.2008 11:13:47 19456 E
39 Typ SFW_PACKAGE 0 07.03.2008 12:18:16 2048
40 Prg CL_ABAP_SWITCH================CP 40 14.10.2006 15:40:30 33792 E
41 Prg SAPLPA_PACKAGE_SERVICES 41 18.03.2008 13:12:54 152576 E
42 Typ TDEVC 0 08.12.2004 18:02:41 6144
43 Prg CL_EX_MB_MIGO_BADI============CP 43 05.12.2008 17:09:58 30720 E
44 Prg IF_EX_MB_MIGO_BADI============IP 30 19.05.2005 19:30:39 14336 E
45 Typ SYST 0 09.09.2004 14:18:12 31744
46 Typ GOSEARCH_PO 0 20.07.2001 19:17:34 4096
47 Prg /SPE/CL_INB_ACTION_INFO=======CP 47 24.03.2008 20:30:06 20480 E
48 Prg /SPE/IF_CONST=================IP 47 14.10.2006 18:49:02 7168 E
49 Typ GODEFAULT 0 14.01.2004 10:04:46 5120
50 Typ GOITEM 0 07.02.2006 10:07:36 65536
Directory of Application Tables
Name Date Time Lngth
Val.
Program SAPLMIGO
SYST . . : : 00004612
\0\0\0\0\x0001\0\x0370\0\0\0\0\0\0\0\0\0\0\0\0\0\x0001\0
GOITEM . . : : 00005524
00000000000000000000
GOSEARCH_PO . . : : 00000492
GODEFAULT . . : : 00000220
Program SAPLV01D
TCUCH . . : : 00000122
0401100020061029095148ANOOPJ 00000000000000
TCUWS . . : : 00000060
040020061227101454CONSULTANT
TCUBN . . : : 00000060
040020061227101454CONSULTANT
TCUDRV . . : : 00000064
00000000000000
Program CL_GUI_PROPS_CONSUMER=========CP
EUDB . . : : 00004068
%CAA72C6DDAD55F1179FA4001143E563CA \0\0\0
ABAP Control Blocks (CONT)
Index Name Fl PAR0 PAR1 PAR2 PAR3 PAR4 PAR5 PAR6 Source Code Line
94 BRAX 01 FFEB CL_EX_MB_MIGO_BADI============CM001 15
95 CLEA 00 0020 CL_EX_MB_MIGO_BADI============CM001 15
96 EXCP 08 0000 CL_EX_MB_MIGO_BADI============CM001 22
97 BRAX 00 0005 CL_EX_MB_MIGO_BADI============CM001 22
98 EXCP 00 0007 CL_EX_MB_MIGO_BADI============CM001 22
99 BRAX 00 0003 CL_EX_MB_MIGO_BADI============CM001 22
100 EXCP 07 0000 CL_EX_MB_MIGO_BADI============CM001 22
101 BRAX 00 0001 CL_EX_MB_MIGO_BADI============CM001 23
102 EXCP 0B 0000 CL_EX_MB_MIGO_BADI============CM001 23
103 METH 01 0000 0000 0000 0000 0000 0000 0000 CL_EX_MB_MIGO_BADI============CM001 24
107 -
00 0000 CL_EX_MB_MIGO_BADI============CM001 24
108 ABOO 02 0000 0005 0000 CL_EX_MB_MIGO_BADI============CM001 1
>>>>> CPOP 00 0000 CL_EX_MB_MIGO_BADI============CM001 1
111 -
00 0000 CL_EX_MB_MIGO_BADI============CM001 1
112 METH 04 0000 0005 0002 0000 0003 0000 0000 CL_EX_MB_MIGO_BADI============CM002 1
116 PAR2 04 0000 C000 0000 CL_EX_MB_MIGO_BADI============CM002 1
118 PAR2 04 0000 C001 0000 CL_EX_MB_MIGO_BADI============CM002 1
120 PAR2 14 0000 C002 0000 CL_EX_MB_MIGO_BADI============CM002 1
122 PAR2 14 0000 C003 0000 CL_EX_MB_MIGO_BADI============CM002 1
124 PAR2 14 0000 C004 0000 CL_EX_MB_MIGO_BADI============CM002 1Hai,
Seems to be problem with the Program.
Please check the point 'What Happened' in the dump for more details.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"MB_MIGO_BADI==================CP " in include
"MB_MIGO_BADI==================CM000 " in
line 0:
"The specified type cannot be converted into the target variables."
Error in the ABAP Application Program
The current ABAP program "CL_EX_MB_MIGO_BADI============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "MB_MIGO_BADI==================CP
You can also perform the syntax check from the ABAP Editor.
Take help from a ABAP consultant and try to check the syntax of the Program.
If you have access even you can check the syntax of the specified program from SE38.
Goto SE38 and put the program name and select 'Source code' and press F8, IN THE SOURCE CODE PAGE, press control+F2 and check whether there is any problem with the syntax or not.
If you find any take help from ABAP consultants.
Hope this helps.
Regards,
Yoganand.V -
Using getRuntime().exec() with Serlvet to run applications in Solaris
I am currently doing a project which requires the execution of Solaris applications through the use of Java Servlet with this Runtime method - Runtime.getRuntime.exec()
This means that if the client PC tries to access the servlet in the server PC, an application is supposed to be executed and launched on the server PC itself. Actually, the servlet part is not an issue as the main problem is the executing of applications in different platforms which is a big headache.
When I tried running this program on a Windows 2000 machine, it works perfectly fine. However, when I tried it on a Solaris machine, nothing happens. And I mean nothing... no errors, no nothing. I really don't know what's wrong.
Here's the code.
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException
response.setContentType("text/html");
PrintWriter out = response.getWriter();
Process process; Runtime runtime = Runtime.getRuntime();
String com= "sh /opt/home/acrobat/";
String program = request.getParameter("program");
try
process = runtime.exec(com);
catch (Exception e)
out.println(e);
It works under Windows when com = "c:\winnt\system32\notepad.exe"
When under Solaris, I have tried everything possible. For example, the launching of the application acrobat.
com = "/opt/home/acrobat"
com = "sh /opt/home/acrobat"I have also tried reading in the process and then printing it out. It doesn't work either. It only works when excuting commands like 'ls'
BufferedReader read = new BufferedReader(new InputStreamReader(process.getInputStream()));Why is it such a breeze to execute prgrams under Windows while there are so many problems under Solaris.
Can some experts please please PLEASE point out the errors and give me some advice and help to make this program work under Solaris! Please... I really need to do this!!
My email address - [email protected]
I appreciate it.
By the way, I'm coding and compiling in a Windows 2000 machine before ftp'ing the .class file to the Solaris server machine to run.Hi!
I'm no expert, but I think I remember doing something similar a few months ago, and I think the problem was that the UNIX server does not know which shell to use. The solution was this:
Create a script that starts the program on the server, and be sure to include a first row saying:
#!/bin/ksh
to specify which shell to use (in this case Korn shell). Then call the script from Runtime.getRuntime().exec() -
How to execute an application in Solaris using Runtime.getRuntime.exec() ?
I am currently doing a project which requires the execution of Solaris applications through the use of Java Servlet with this Runtime method - Runtime.getRuntime.exec()
This means that if the client PC tries to access the servlet in the server PC, an application is supposed to be executed and launched on the server PC itself. Actually, the servlet part is not an issue as the main problem is the executing of applications in different platforms which is a big headache.
When I tried running this program on a Windows 2000 machine, it works perfectly fine. However, when I tried it on a Solaris machine, nothing happens. And I mean nothing... no errors, no nothing. I really don't know what's wrong.
Here's the code.
public void doPost(HttpServletRequest request, HttpServletResponse response)
throws ServletException, IOException
response.setContentType("text/html");
PrintWriter out = response.getWriter();
Process process; Runtime runtime = Runtime.getRuntime();
String com= "sh /opt/home/acrobat/";
String program = request.getParameter("program");
try
process = runtime.exec(com);
catch (Exception e)
out.println(e);
It works under Windows when com = "c:\winnt\system32\notepad.exe"
When under Solaris, I have tried everything possible. For example, the launching of the application acrobat.
com = "/opt/home/acrobat"
com = "sh /opt/home/acrobat"I have also tried reading in the process and then printing it out. It doesn't work either. It only works when excuting commands like 'ls'
BufferedReader read = new BufferedReader(new InputStreamReader(process.getInputStream()));Why is it such a breeze to execute prgrams under Windows while there are so many problems under Solaris.
Can some experts please please PLEASE point out the errors and give me some advice and help to make this program work under Solaris! Please... I really need to do this!!
My email address - [email protected]
I appreciate it.
By the way, I'm coding and compiling in a Windows 2000 machine before ftp'ing the .class file to the Solaris server machine to run.it is possible that you are trying to run a program that is going to display a window on an X server, but you have not specified a display. You specifiy a display by setting the DISPLAY environment variable eg.
setenv DISPLAY 10.0.0.1:0
To check that runtime.exec is working you should try to run a program that does not reqire access to an X Server. Try something like
cmd = "sh -c 'ls -l > ~/testlist.lst'";
alternatively try this
cmd = "sh -c 'export DISPLAY=127.0.0.1:0;xterm '"
you will also need to permit access to the X server using the xhost + command -
Help: use command "run" and "exec", no output
I create a script file Test.sql, and type "run d:\test.sql" in ttisql's command prompt, but there is no output, not even any error messages.
Command> run d:\test.sql;
Command>
I try to use "Prepare" and "Exec", still no output
Command> prepare 1 select * from employee;
Command> exec 1;
Command>
ttisql looks recognize these commands, but it doesn't execute them. Who knows the reason? thanks.Hi,
I create a script file Test.sql, and type "run d:\test.sql" in ttisql's command prompt, but there is no output, not even any error messages.What SQL statements are in Test.sql? To see more verbose output from ttIsql, try increasing verbosity. The default is 2. The highest (most verbose) is 4.
Command>verbosity;
verbosity = 2
Command> verbosity 4;
The command succeeded.
try to use "Prepare" and "Exec", still no outputTry adding a fetchone or fetchall command to retreive the result. e.g.
Command> prepare 1 select * from emp;
Command> exec 1;
Command> fetchone;
< 7369, SMITH, CLERK, 7902, 1980-12-17 00:00:00.000000, 800.0000, <NULL>, 20 >
1 row found.
Command> fetchone;
< 7499, ALLEN, SALESMAN, 7698, 1981-02-20 00:00:00.000000, 1600.000, 300.0000, 3
0 >
1 row found.
Command> fetchall;
< 7521, WARD, SALESMAN, 7698, 1981-02-22 00:00:00.000000, 1250.000, 500.0000, 30
>
< 7566, JONES, MANAGER, 7839, 1981-04-02 00:00:00.000000, 2975.000, <NULL>, 20 >
< 7654, MARTIN, SALESMAN, 7698, 1981-09-28 00:00:00.000000, 1250.000, 1400.000,
30 >
< 7698, BLAKE, MANAGER, 7839, 1981-05-01 00:00:00.000000, 2850.000, <NULL>, 30 >
< 7782, CLARK, MANAGER, 7839, 1981-06-09 00:00:00.000000, 2450.000, <NULL>, 10 >
< 7788, SCOTT, ANALYST, 7566, 1987-04-19 00:00:00.000000, 3000.000, <NULL>, 20 >
< 7839, KING, PRESIDENT, <NULL>, 1981-11-17 00:00:00.000000, 5000.000, <NULL>, 1
0 >
< 7844, TURNER, SALESMAN, 7698, 1981-09-08 00:00:00.000000, 1500.000, 0.000000e+
00, 30 >
< 7876, ADAMS, CLERK, 7788, 1987-05-23 00:00:00.000000, 1100.000, <NULL>, 20 >
< 7900, JAMES, CLERK, 7698, 1981-12-03 00:00:00.000000, 950.0000, <NULL>, 30 >
< 7902, FORD, ANALYST, 7566, 1981-12-03 00:00:00.000000, 3000.000, <NULL>, 20 >
< 7934, MILLER, CLERK, 7782, 1982-01-23 00:00:00.000000, 1300.000, <NULL>, 10 >
12 rows found.
Command>
Good luck.
Simon -
Runtime.exec() - how to open new window for new program?
Hi,
I have searched through the forums but haven't found an answer to this one yet. I am using runtime.exec() to start up a new java program. At first I thought it wasn't running properly but, after checking task manager, I have discovered that the new program I open runs, it is just completely invisible to me. I am wondering how I can get the new program to run in a command window or something where I can monitor it.
Thank you for your help,
DrewThank you all. After trying to figure out why the start command wouldn't work in the runtime.exec() call(not an executable - I am a dolt), I tried putting it in a batch file and it worked perfectly. Thanks for your help,
Drew -
How to get return value from Java runtime.getRuntime.exec?
I'm running shell commands from an Oracle db (11gr2) on aix.
But, I would like to get a return value from a shell comand... like you get with "echo $?"
I use a code like
CREATE OR REPLACE JAVA SOURCE NAMED common."Host" AS
import java.io.*;
public class Host {
public static int executeCommand(String command) {
int retval=0;
try {
String[] finalCommand;
finalCommand = new String[3];
finalCommand[0] = "/bin/sh";
finalCommand[1] = "-c";
finalCommand[2] = command;
final Process pr = Runtime.getRuntime().exec(finalCommand);
pr.waitFor();
catch (Exception ex) {
System.out.println(ex.getLocalizedMessage());
retval=-1;
return retval;
/but I do not get a return value... because I don't know how to get return value..
Edited by: user9158455 on 22-Sep-2010 07:33Hi,
Have your tried pr.exitValue() ?
I think you also need a finally block that destroys the subprocess
Regards
Peter -
ACS 5.3 Different password for privilege exec mode
This is what I would like to do for our Core Routers. Not too familiar with ACS, so please excuse me if I don't provide you will all the details.
Right now I have ACS 5.3 which is tide to Active Directory. When a user logs in they use there AD credentials to access the CLI and use that same password to access privileged exec mode.
What I want to do is have users log in using their AD credentials like normal but have a unique password to access privileged exec mode, different for each user.
So far this is what I have done:
1) Created a test user (same as AD user name) in the Internal Identity Store
Password Type: Internal Users
normal password set differently that Enable Password (I think Enable Password will only be relevant)
2) Created a rule under Access Policies > Device Admin - Commands > Identity
- Created Rule with Current Condition Set (TACACS+:Authen-Type match ASCII And (TACACS+:Action match Login AND TACACS+Service match Enable))
- Identity Source: Internal Users
When I enable the rule. I can login with my AD credentials, but when I try to access privilege exec mode the password that I created for the local user (regular and enable) does not work.
Question: Do I need to create a shell profile with Maximum privilege value set to something under 15 for the authorization policy and apply it so it will try and use the internal user's enable password?
Not to familiar with how this works. One of my co-workers said I needed to demote the users in order for my rule to work.Hey Tushar,
That is our current setup. Right now each user logs in with their AD credentials to get into user exec mode and the same password to get into privileged exec mode. I would like to have a user login with their normal AD credentials to get into user exec mode and a different password (specific to each user, not locally on the device) to login to privileged exec mode. We are doing this for security reasons. Hopefully that clarifys what I'm trying to do.
Thanks
Maybe you are looking for
-
HELP! HOW CAN I GET BACK TO MY MAC FROM FAR AWAY? I WILL BE AWAY FOR 4 MTH AND WILL HAVE TO WORK AT DISTANCE I RUN MAC OSX 10.6.8 I WILL HAVE ACCES TO AN APPLE COMPUTER AT MY DESTINATION. BUT WILL HAVE TO USED INFORMATIONS FROM MY HOME COMPUTER. NEED
-
Hi All, I want to implement KM setup in EP7 portal. Could anyone help me by providing some docs for the same. Many thanks in advance. Regards, Nithya K
-
Error when updating itunes match
cant complete your itunes store request. the itunes store is temporarily unavailable. please try again later.
-
Some people can't open some excels in SharePoint they get an error.
Hello, Somo people cannot open some excels in my SharePoint 2010 farm, the get the following error: "unable to process your request. Wait a few minutes and try performing this operation again". I found a lot of information on internet but nothing wor
-
DM DMU_MAT_BOM_READ and CSAP_MAT_BOM_READ have a contradiction
We are in the process of testing a recent upgrade from 4.6C to ECC6.0. In a custom program we have use the FM DMU_MAT_BOM_READ which takes material (length 18) as input. This standard FM then calls another FM CSAP_MAT_BOM_READ which takes material (l