Syntax Error when generate print program in HRFORMS
Dear All,
I created form for payslip using HRFORMS, the name form is ZPS_TPI_01. When I activate the form, the error raised: Generated print program contains a syntax error
Diagnosis
Generated print program /PYXXFO/ZPS_TPI_01_PRNT conains a syntax error in line 9 of include /PYXXFO?ZPS_TPI_01_PAYR.
I have already apply note 878168 but it is not work.
Please advise me.
Thank you,
hi,
can you let me know for which country are you trying to generate the HR form for payslip?
There are certain countries for which payslip isnt supported.
For such countries you get a similar error.
Thank you,
Jose
Similar Messages
-
InfoSet Query: Syntax Error while generating the program.
Dear All,
I have a Query in CRM system which contains an Infoset based on LDB.
The InfoSet Query throws up a Syntax error while generating the program.
So, we are not able to change the Infoset using the Infoset Query through SQ01.
The error is as follows:-
Syntax error in program "AQZZ==/SAPQUERY/CRM_ACTMON1 ".
Error in the ABAP Application Program
The current ABAP program "CL_QUERY_OUTPUT_DEFINITION====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "AQZZ==/SAPQUERY/CRM_ACTMON1 "
in include "AQZZ==/SAPQUERY/CRM_ACTMON1 " in
line 28:
""CRMT_REPORT_LOCATORLIST" must be a flat structure. You cannot use int"
"ernal tables, strings, references, or structures as components. -"
Please help me arrive at an solution, so that we are able to change the Infoset through the InfoSet Query.
Awaiting your reply as soon as possible.
Thanks and Regards,
Pankaj.There is an error in your query, specifically in the definition of CRMT_REPORT_LOCATORLIST. In the short dump (transaction ST22) you will see more details and the exact location of an error if you just scroll down.
I can't tell more because this problem is specific to your system, to which I have no access. Read the whole dump and look at all the objects mentioned there. -
Error when Generating the Program
Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
"Error when generating the program" Message no. /SAPAPO/TSM141
Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
Possible causes:
1. The template has been corrupted
2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
Anyone encountered this error message and any possible solutions to this issue.
Thanks
SurenderI did find an ABAP Dump when looking at ST22. The short message is as follows:
Runtime Errors GEN_BRANCHOFFSET_LIMIT_REACHED
Date and Time 05/14/2007 19:33:54
Short text
Jump distance is too large and cannot be generated.
What happened?
A jump distance is too large and cannot be generated.
A control structure or a routine with "CHECK" or "EXIT" contains
too many ABAP statements.
Error in the ABAP Application Program
The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
determined that
within an ABAP event a control structure (for example, IF..ENDIF
or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
become too large. The resulting jump distance is too large so that
it could no longer be generated.
With the internal load format, the jump distance must not be
greater than 32768 (this is the size of approximately 10.000
ABAP statements).
The jump distance that is to be generated, however, is 50885.
How to correct the error
The ABAP application program must be changed. -
Error when generating update program
Hi,
I was loading transactional data in to Cube. The load had failed and in RSMO status tab is showing that Error when generating update program. could you please suggest me some one how to resolve it.
regards,
Neeraja
nullHi,
Actually when you are loading data, the update program is executed. It is generated while you create the update rules for your data target. Please check whether the update rules are active or just go to the update rules and activate it again. Try loading data after activation and let us know the results.
With Regards -
Visual C++ runtime library error when generating printed documentation from RH9
I just upgraded a project from RH 7 to RH 9. I tried generating printed documentation in Word from it, but as soon as the Printed Documentation dialog opened, a Visual C++ Runtime Library error displayed. RoboHelp stopped working and I had to restart.
I tried using one of the sample projects -- same thing happened.
I then created a brand-new project. This time, opening the Printed Documentation dialog worked. I selected "Generate Word Doc" and the .docx extension, since I have Word 2010, and tried to generate printed documentation. However, the following message then displayed: Cannot find Microsoft Word installed on your system.
So I have two questions:
- How can I avoid crashing RoboHelp when generating printed documentation?
- How can I ensure that RoboHelp finds the Word 2010 installation on my system?
Thanks for any help!
OK, just played around a bit more and I was able to help myself on the first question:
- I created a new Printed Documentation Layout in the Single Source Layouts pane, and from there I was able to generate .pdf files, without encountering the Visual C++ runtime error.
- But the "Cannot find Microsoft Word installed on your system." msg still pops up when I try to generate .docx files. (When I generate .doc files, they have no content.)
Message was edited by: mizottoFirst the fact that the problem is with old layouts suggest they were using an old template.
The PDF creation relies on a Word document being created in the background. The fact that you cannot generate a good doc or docx makes it odd that you get a PDF. The PDF is OK I take it?
I'm wondering if you have not applied the 901 patch and are running Word 2010 64 bit?
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge -
HRFORMS Workplace Infotype 0008 in generated print program
Hi folks
We have a problem with generated print programs for time sheets. Generated by the HRFORMS workplace.
Even when the workplace generate the printprogram for the SmartForm, accordingly a code line is generated as the 1st in the PrintProg.
INFOTYPES: 0000, 0001, 0008.
The comment tells us that this will be necessarily for authority checks on the LDB for pay roll.
Due to company restrictions we don't want to give key users the authorization for info type 0008.
Has anybody an idea what's to do to eliminate the info type 0008 from the printprogram w/o a modification.
We would appreciate for any help to this subject, kindly.
Kind Regards
Dieter Koppe
KoppeConsulting
Edited by: Dieter Koppe on Sep 18, 2008 8:02 AMhi,
can you let me know for which country are you trying to generate the HR form for payslip?
There are certain countries for which payslip isnt supported.
For such countries you get a similar error.
Thank you,
Jose -
Hierarchy load - Error RSAR 683 Syntax error in generated program, row 0
Hi guys,
When I load the hierarchy on ZMATERIAL (load from 0MATERIAL hierarchy - source system BW), I have this error message : RSAR 683 Syntax error in generated program, row 0.
I have found several SAP notes, especially [Sap Note 944842|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_whm/~form/handler], but the implementation on our system does not change anything.
We are working on BW3.5 SP12.
Can anyone could tell me what to do ?
Will this issue be solved once we upgrade until SP18 as it is mentionned in the SAPNote ?
Thanks,
Alexandra
Edited by: Alexandra Guillaux on Apr 1, 2009 4:36 PMHello Alex,
after implementing the corrrection part of note 944842 via SNOTE, plaese also:
1. replicate datasource
2. activate transfer structure (report RS_TRANSTRU_ACTIVATE_ALL)
3. activate infoobject (make dummy change to description
of infoobject etc, save and activate it, remove change and save and
activate it again).
Hope it could resolve the incident.
Thank you & Best regards,
Vince -
Syntax Error in generated program.
Hi Experts -
I saw a similar thread regarding the issue I'm having but I thought I'd open another thread.
0CMMT_ITEM_FMCI_PU_HIER Syntax Error for Generated Program
I'm doing an extraction for 0CRM_ORGUNIT_HR01_HIER in RSA3 of CRM.
I get an error message:
Message RJ028 : Error 6 in function module RSS_PROGRAM_GENERATE
There is a syntax error in the code.
How do you solve this issue?
We applied OSS note 822323 but still get the same error. The code still has the syntax error.
Any one saw this or have any solutions? Please let me know. Thanks a lot in advance!Hi,
Use the program RSA1HCAT in SE38 to check your hierarchy.
Transaction RSA3 was not developed for checking hierarchy DataSources.
Rather, it is only for transaction and attribute/text datasources. If
you want to check the extraction of hierarchy datasources in the R/3
system, you should use the report RSA1HCAT. In this report, enter the
name of the hierarchy datasource in the "DataSource with HierarchyType"
field.
For this problem look at the note: 632920.
Regards,
Srikanth. -
Error when generating the update program RSAU484
Hi,
I am getting the following error while loading data into customer master from CRM system
Error when generating the update program
Message no. RSAU484
Diagnosis
An error occurred during program generation for InfoSource MR_CDB_CUST_HFR and InfoProvider 0BPARTNER$T. This may be extrapolated to incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program again. You can find help on the error in the error log.Yes,there is just a single line of code in the start routine
DELETE DATA_PACKAGE WHERE CUSTOMER is initial.
and update rules for Business partner and customer market which are object mapped 1:1. No routines or formulaes.
Could this be a technical issue on the flexible update or a data quality ? -
Error when generating the update program
Hi BW Experts,
I am facing issue while loading data to cubes:
0TCT_C01 & 0TCT_C02
In load monitor (RSMO) -> details> some data pakages are going thru successfully while some are failing with error:
Error when generating the update program
ThanksHello,
Try activating both the cubes using RSDG_CUBE_ACTIVATE. Activate them even thou they seem active.
Also you can refer to OSS Notes:
Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update
Note 1152453 - Termination generating InfoCube write program
Regards,
Shashank -
Error when generating program /SAPAPO/TSM141
Hello APO Experts!!
I have one infocube for sales history, which has one key figure that contains the sales history values.
First, I was using this key figure in one planning area. This Key Figure Semantics for Read and Write Operations was 002 = Semantics for InfoCube key figures.
Now, I had to include the same key figure in another planning area and with the same configuration Semantics = 002.
The problem is, in my DEV system, the modification was perfect. Then when I did in the QA system, I´ve got the error "Error when generating program /SAPAPO/TSM141" when trying to access the data in the planning books that are created in the first planning area.
For the second planning area, nothing happens, everything is working correctly.
Do you have any idea of what this could be?
Regards
AngleaHi
Sounds like a Planning Area extraction problem. First of all check that all your required BW InfoObjects are created for the Planning Areas, then check that the Semantics you mentioned are the same for all Aggregates in the Planning Area.
Also try running program /SAPAPO/TS_PSTRU_GEN to regenerate the planning area extractor.
Delete and recreate the data source.
Hope that helps
Regards
Ian -
Error when generating program when creating CVC using infoprovider
We are receiving the message "Error when generating program" when
creating CVC using infoprovider.
This may have something to do with the fact that we added an attribute
to the infoObject 9ALOCNO. We are getting an information message if we
run a consistency check in the POS.
We had this same issue in our development system. Here, I deactivated
and then reactivated the CVCs and this resolved the problem. However,
this is not a good solution since this is also a problem in our
production system and we do not want to deactivate the POS.
is there another option to fix this problem?
Thank you,
RumiHi Rumi,
i would try these:
1. Make sure the cube is active and every thing ok there
2. Run programs /SAPAPO/TS_PSTRU_CONS_CHECK on POS and /SAPAPO/TS_LCM_CONS_CHECK on planning area respectively.
3. Check the CVC creation log in transaction /n/sapapo/mc62 for more details. -
Error when generating program /SAPAPO/TSM141 and Errors in source system
Hello APO Experts!
I had to include a new key figure in the cube and the planning area with configuration semantic = 000.
The problem is, in my DEV system, the modification was perfect. Then when I did in the QA system, I´ve got the error "Error when generating program /SAPAPO/TSM141" and u201CErrors in source systemu201D when trying to load data in the Infopackage.
Do you have any idea of what this could be?
Best Regards
NikHello,
The problem may come from the inconsistency between the datasource settings and the content in table /SAPAPO/TSAREATE.
- SE16, go to table /SAPAPO/TSAREATE, input the planning area name, check the extraction structure, which is started from '/1APO/EXT_STRU'.
- SE16, go to table /SAPAPO/TSAREAEX, input the datasource name, and check the extraction structure.
Are the two extraction structures the same or different ?
If they're different, please read the below solutions, otherwise, you can ignore the following.
In general and most customer cases this inconsistency happens during transporting of datasource alone. In many cases the planning area is directly created at target system and datasoucre transported from a a different system which causes incorrect export structure entry in planning area table.
Please refer to following content from note 549184:
Q4: Why could I have extraction problem after transport of DataSource?
A4: DataSources for DP/SNP planning areas depend directly on the structure of the planning areas. That's why the planning area MUST ALWAYS be transported with or before the DataSource.
The simple solution will be to create a dummy data source for this planning area. This will regenerate the extract structure for all other data sources as well and update the corresponding tables. After that you can delete the dummy datasource.
After delete the dummy datasource, in case of inconsistency, please also run the report /SAPAPO/TS_PSTRU_GEN report for
- Basis - form routines
- Create planning objects
- Planning area extractor
with the flags "Reset generation time stamp" and "Generate" set.
And in order to transfer datasource correctly, please also refer to the consulting note 514524.
Best Regards,
Ada -
BW Statistics-BI7-Error when generating the update program
Dear All,
We faced the below problem in while executing the infopackages for BW statistics in BI7.0
7099 records from 7099 records..but shows request is red.
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Update rules ( 7089 -> 0 Records ) : Errors occurred (RED)
Update rules ( 7089 -> 0 Records ) : Errors occurred
InfoCube 0TCT_C23 will be updated
Error when generating the update program (RED)
Is there any notes to apply for this?
Initilaztion is executed with out any errors!!
RegardsHi
Caller 01 : If there is any inconsistecy while loading the data or if the program cannot able to execute a specific task it will give the caller errors.
check in the transaction ST22
check for the OSS notes 631668, 860475
Check the below links which have a discussion on the same problem.
A caller 01, 02 or equal to or greater than 20 contains an error meesage
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
ERROR?
Data load System error
Hope this will help
Regards
Shilpa -
Helllo,
While Infopackage loading for DS 2LIS_04_P_COMP following error is coming.. please see if anyone may face such kind of error.
***Error when generating the update program::::ID RSAU No. 484***
Diagnosis
An error occurred during program generation for InfoSource
2LIS_04_P_COMP and InfoProvider ZISPP_C01 . This may be extrapolated to
incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program
again. You can find help on the error in the error log.
amit shetyehi,
Do a check on the update rules and see if it returns no errors...
if that is the case, then check the short dump and try to get the program name for the update rules..In se38 putting the program name, you can go inside it and do a check there as well if there are any errors....
If in the end yo still dont find anything, try to delete and re-create the update rules..
But i think you will get quite useful info from the dumps if there are any..
hope this helps you..
regrds,
Jadeep
Maybe you are looking for
-
[SOLVED] Gnome3 how to delete a shell theme?
Hi, I have recently tried lots of shell themes for gnome, at first I noticed I was badly installing them (I use the gnome-tweak interface to install themes) Now I want to delete some of those themes that I dont want on my system, but I cant seem to f
-
Voiceover not active ...
Not having used Voiceover for quite some time I'm wondering if I'm wrong in a minor way. I can't get audio to come up yet the area selected becomes red with a red line above it indicating rendering is required, The mic is one I've used a fair number
-
Hi, I have an issue in creating Tab position under Paragraph section. I have to display a column like which 10 character length and it is numeric value and also it needs to right justified. if i make the tab right justified .. will system start pri
-
Should I color the ProRes or relink to RAW...
Basically, I just finished my thesis and I'm planning on color correcting it with Color. I've been editing with ProRes 422 (HQ) do you guys recommend I relink my footage to RAW files (from camera) and then Color or just stick with ProRes. Will I face
-
570 GTX Twin Frozr II OC - Ok to flash non OC bios?
Hi there, For stability purposes, is it safe to flash the reference non overclock edition bios for these Twin Frozr II OCs? I'm sick of having to use MSI Afterburner to slightly lower clocks and if I RMA the cards, they will just run benchmarks and U