Syntax Error where ? ( CS5 )
I keep getting an error on this script, at line 3, but I can't see why?
<SCRIPT language="javascript">
function fillScreen()
{ self.moveTo(0,0);
self.resizeTo(screen.availWidth,screen.availHeight);
</SCRIPT>
self.moveTo(0,0); <--- Syntax Error on Dreamweaver CS5
Any Ideas ? Thanks
Most modern browsers will block your attempt to do this nasty trick, you know?
Your job is to make the web page accommodate all visitors, not make the visitors accommodate the web page.
CS5 is not giving me a syntax error with that antique code (I'm guessing it's vintage 1990 or thereabouts).
Why do you need it?
Similar Messages
-
With the introduction of PHP 5.3, the powers that be introduced a new operator, "goto." See it in the manual here:
http://php.net/manual/en/control-structures.goto.php
Example:
<?php
goto a;
echo 'Foo';
a:
echo 'Bar';
?>
Outputs Bar.
It's really quite handy.
However, Dreamweaver CS5 does not recognize this instruction and displays a syntax error where it both installed and at the target.
Is there a workaround or a way to add the tag to the application?Thanks, I had re-written and seem to have it working ok but went back to original to test using string instead of text and that seems to work.
Thanks again for the help.
Joe -
Hi,
I've a query for a report as below. I want distinct donor code whereas i have 2 or more customers with same name and i want to retrieve data of customers between specific donor codes.I've a syntax error where i give 'between' for the following syntax in the code
DONOR_TAB.DONOR_CODE BETWEEN DONOR_TAB.DONOR_CODE=:p_code AND DONOR_TAB.DONOR_CODE=:p_code
The following is the query:
SELECT ALL INITCAP(TITLE_TAB.TITLE_NAME||' '||DONOR_TAB.FIRST_NAME||' '||DONOR_TAB.MIDDLE_NAME||' '||DONOR_TAB.LAST_NAME) donor_name,
RTRIM(INITCAP(RPAD(DONOR_TAB.ADDRESS1, 35, ' ')||RPAD(DONOR_TAB.ADDRESS2, 35, ' ')||RPAD(DONOR_TAB.STREET, 30, ' '))) DISPLAY_COL2,
INITCAP(CITY_MASTER_TAB.CITY_NAME||' - '||DONOR_TAB.PIN) DISPLAY_COL3,
INITCAP(CITY_MASTER_TAB.STATE_NAME||', '||CITY_MASTER_TAB.COUNTRY_NAME) DISPLAY_COL4,
UPPER('DONOR CODE'||' - '||CITY_MASTER_TAB.CITY_NAME||'/'||DONOR_TAB.DONOR_CODE) DISPLAY_COL5
FROM DONOR_TAB, CITY_MASTER_TAB, TITLE_TAB, DONOR_PROG_TAB
WHERE donor_tab.donor_code = donor_prog_tab.donor_code AND DONOR_TAB.CITY_CODE = CITY_MASTER_TAB.CITY_CODE
AND DONOR_TAB.TITLE_CODE = TITLE_TAB.TITLE_CODE
OR DONOR_TAB.DONOR_CODE = :p_code
OR DONOR_TAB.DONOR_CODE BETWEEN DONOR_TAB.DONOR_CODE=:p_code AND DONOR_TAB.DONOR_CODE=:p_code
OR DONOR_TAB.LANG = :P_LANG
OR DONOR_TAB.REMINDER = :P_REMINDER
ORDER BY DONOR_TAB.DONOR_CODE
Can you help me as to how i rectify this error
ThanksSyntax is like this
DONOR_TAB.DONOR_CODE BETWEEN :p_code AND :p_code
Note:
You hav given initial and final values as same(p_code) -
DreamWeaver CS4-CS5 Creates Syntax Errors
I cannot seem to find any info on this online but my DreamWeaver CS4 and a trial of DreamWeaver CS5 both create PHP and SQL queries that are loaded with syntax errors. I use XAMPP on my computer as I have done for years, and it works fine with phpMyAdmin and Komodo Edit. DreamWeaver has been a nifty app to quickly knock out simple applications in that past, but now I spend too much time manually correcting syntax errors in PHP page queries.
Has anyone there heard of a fix for this? Several other web developers have told me that they entirely abandoned DW CS* series and moved on to other IDE's rather than try to fix the problem.
EXAMPLE:
Here is what it wrote:
if ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "form1")) {
$updateSQL = sprintf("UPDATE `mysite` SET about-yn=%s, about-h1=%s, about-p1=%s, about-p2=%s, about-p2-img=%s, about-p3=%s, about-p3-img=%s, about-p4=%s, about-p4-img=%s WHERE siteID=%s",
GetSQLValueString($_POST['aboutyn'], "text"),
GetSQLValueString($_POST['abouth1'], "text"),
GetSQLValueString($_POST['aboutp1'], "text"),
GetSQLValueString($_POST['aboutp2'], "text"),
GetSQLValueString($_POST['aboutp2img'], "int"),
GetSQLValueString($_POST['aboutp3'], "text"),
GetSQLValueString($_POST['aboutp3img'], "int"),
GetSQLValueString($_POST['aboutp4'], "text"),
GetSQLValueString($_POST['aboutp4img'], "int"),
GetSQLValueString($_POST['siteID'], "int"));
Here is what it should have written:
f ((isset($_POST["MM_update"])) && ($_POST["MM_update"] == "form1")) {
$updateSQL = sprintf("UPDATE `mysite` SET `about-yn`=\"%s\", `about-h1`=\"%s\", `about-p1`=\"%s\", `about-p2`=\"%s\", `about-p2-img`=\"%s\", `about-p3`=\"%s\", `about-p3-img`=\"%s\", `about-p4`=\"%s\", `about-p4-img`=\"%s\" WHERE `siteID`=\"%s\"",
GetSQLValueString($_POST['aboutyn'], "text"),
GetSQLValueString($_POST['abouth1'], "text"),
GetSQLValueString($_POST['aboutp1'], "text"),
GetSQLValueString($_POST['aboutp2'], "text"),
GetSQLValueString($_POST['aboutp2img'], "int"),
GetSQLValueString($_POST['aboutp3'], "text"),
GetSQLValueString($_POST['aboutp3img'], "int"),
GetSQLValueString($_POST['aboutp4'], "text"),
GetSQLValueString($_POST['aboutp4img'], "int"),
GetSQLValueString($_POST['siteID'], "int"));
[email protected]Dreamweaver will not produce such a mess when using column names which comply with the MySQL Naming Conventions and don´t contain (often quite problematic) hyphen characters.
That said, you´ll be on the safe side when renaming your columns by using underscores instead, example:
about_p3_img
Several other web developers have told me that they entirely abandoned DW CS* series and moved on to other IDE's rather than try to fix the problem.
Dreamweaver is certainly not a "perfect" PHP development IDE, but other IDEs (I use Komodo or Aptana at times and like them a lot...) aren´t perfect either. This may seem strange, but IMO Dreamweaver did do the - sort of - right thing by not letting the user get away with using such problematic characters, and that´s what those other IDEs I work with regretfully don´t pay attention to. -
Beginner: Getting syntax error on WHERE clause in SELECT
I'm very new to php and mySQL. Am using DW master/detail to generate to basic code I need. One thing I need to do is modify a select statement in the master to include a WHERE clause to limit the selection to a particular value in one field.
I'm getting a syntax error with the WHERE clause I'm adding to the map select statement.
This is the portion of the error message showing the error location:
'WHERE Group='Community' LIMIT 0, 10'
The php that generated the select is:
$query_maps = "SELECT * FROM tblmaps ORDER BY tblmaps.DispSeq";
$query_limit_maps = sprintf("%s WHERE Group='%s' LIMIT %d, %d", $query_maps, $selectGroup, $startRow_maps, $maxRows_maps);
This approach to creating the select statement is from the code generated for the master page. It adds the LIMIT clause. All I did was add the "WHERE Group='%s' and the $selectGroup variable which comes from earlier code. You can see that the $selectGroup variable is equal to the "Community: group.
I've scanned the web to see what syntax error I might be making but haven't found anything that explains it.
The full resolved select statement is:
SELECT * FROM tblmaps ORDER BY tblmaps.DispSeq WHERE Group='Community' LIMIT 0,10
What am I not seeing?
TomThanks. Make sense but changing that didn't help.
Here's the error message I'm getting:
You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'Group='Community' ORDER BY tblmaps.DispSeq LIMIT 0, 10' at line 1
The full select (from a debugging ECHO I inserted) is:
SELECT * FROM tblmaps WHERE Group='Community' ORDER BY tblmaps.DispSeq LIMIT 0, 10
Note that when I take the WHERE clause out, there is no syntax error. -
DATAMOVER: Error: Syntax error in where clause for PSOPRDEFN
SET LOG C:\PSUSER_HRM.log;
SET input F:\psoprdefn.dat;
IMPORT psoprdefn where OPRId = 'PS';
when i execute this command after importing .dat file from my database i get error:
Error: Syntax error in where clause for PSOPRDEFN
any suggestions pls help....
Thanks
aravind
Edited by: 967641 on Nov 20, 2012 11:39 AM
Edited by: 967641 on Nov 20, 2012 11:40 AMThat is correct.
Datamover tries to insert data in PSOPRDEFN and rows exist with these keys.
To avoid this you can add the following statement in your script:
SET UPDATE_DUPS;
This will update the values other than the keys if a row already exists in the database with the keys in the dat file.
I can advice you to buy the new book of Jim Marion, PeopleSoft PeopleTools Data Management and Upgrade Handbook
http://www.amazon.com/PeopleSoft-PeopleTools-Management-Upgrade-Handbook/dp/0071787925/ref=sr_1_1?ie=UTF8&qid=1353575734&sr=8-1&keywords=jim+j+marion
It has an entire chapter on how to use datamover.
Hakan -
AppleScript InDesign CS5.5 Syntax Error
Hi, this script runs fine as is but when I got to edit, it gives me error when compiling. Error I get is on following 2 lines with as text part. If I take it out, I don't get error but script doesn't run. Script was created on a older version of MAC OS and InDesign but someone else.
set contents of myTextFrame to TheList as text
set XML_File to (choose file with prompt XMLstr) as text
Error is Syntax error:" Expected end of line, etc. but found application constant or consideration."
Here is complete script:
try
set CSVstr to "Please locate your CSV file..."
set CSV_File to (choose file with prompt CSVstr) as text
set csvData to read file CSV_File
set csvEntries to paragraphs of csvData
set {CSVItem1} to parseCsvEntry(csvEntries's item 1)
set {CSVItem2} to parseCsvEntry(csvEntries's item 2)
set {CSVItem3} to parseCsvEntry(csvEntries's item 3)
set {CSVItem4} to parseCsvEntry(csvEntries's item 4)
set {CSVItem5} to parseCsvEntry(csvEntries's item 5)
set {CSVItem6} to parseCsvEntry(csvEntries's item 6)
set {CSVItem7} to parseCsvEntry(csvEntries's item 7)
set {CSVItem8} to parseCsvEntry(csvEntries's item 8)
set {CSVItem9} to parseCsvEntry(csvEntries's item 9)
set TheList to {CSVItem1, CSVItem2, CSVItem3, CSVItem4, CSVItem5, CSVItem6, CSVItem7, CSVItem8, CSVItem9}
tell application "Adobe InDesign CS5.5"
set myDocument to active document
tell XML view preferences
set show attributes to false
set show structure to true
set show tagged frames to false
set show tag markers to false
set show text snippets to true
end tell
tell XML import preferences
set allow transform to false
set create link to XML to false
set ignore unmatched incoming to true
set ignore whitespace to true
set import CALS tables to true
set import style to merge import
set import text into tables to false
set import to selected to false
set remove unmatched existing to false
set repeat text elements to true
end tell
set myPage to active page of active window
tell myPage
set myTextFrame to make text frame
set geometric bounds of myTextFrame to {"6p", "6p", "24p", "24p"}
****Error on below line ****
set contents of myTextFrame to TheList as text
move myTextFrame to {"-30p", 0}
end tell
set Char1 to item 1 of TheList
set Char2 to item 2 of TheList
set Char3 to item 3 of TheList
set Char4 to item 4 of TheList
set Char5 to item 5 of TheList
set Char6 to item 6 of TheList
set Char7 to item 7 of TheList
set Char8 to item 8 of TheList
set Char9 to item 9 of TheList
set AppleScript's text item delimiters to "\"\""
set {LTry} to Char1's text items
set AppleScript's text item delimiters to {}
set placedAsset to place asset asset LTry of library "JetroXMLElements.indl" on myDocument
move placedAsset to {0.363, 0.84}
set placedAsset to place asset asset Char2 of library "JetroXMLElements.indl" on myDocument
move placedAsset to {3.695, 0.84}
set placedAsset to place asset asset Char3 of library "JetroXMLElements.indl" on myDocument
move placedAsset to {6.905, 0.84}
set placedAsset to place asset asset Char4 of library "JetroXMLElements.indl" on myDocument
move placedAsset to {0.363, 3.91}
set placedAsset to place asset asset Char5 of library "JetroXMLElements.indl" on myDocument
move placedAsset to {3.695, 3.91}
set placedAsset to place asset asset Char6 of library "JetroXMLElements.indl" on myDocument
move placedAsset to {6.905, 3.91}
set placedAsset to place asset asset Char7 of library "JetroXMLElements.indl" on myDocument
move placedAsset to {0.363, 6.95}
set placedAsset to place asset asset Char8 of library "JetroXMLElements.indl" on myDocument
move placedAsset to {3.695, 6.95}
set placedAsset to place asset asset Char9 of library "JetroXMLElements.indl" on myDocument
move placedAsset to {6.905, 6.95}
tell myDocument
set XMLstr to "Please locate your XML file..."
****Error on below line ****
set XML_File to (choose file with prompt XMLstr) as text
import XML from XML_File
end tell
tell application "Adobe InDesign CS5.5"
set find text preferences to nothing
set change text preferences to nothing
set find what of find text preferences to "mykzlplx"
set change to of change text preferences to ""
tell active document
change text
end tell
set find text preferences to nothing
set change text preferences to nothing
set find what of find text preferences to "¬"
set change to of change text preferences to ""
tell active document
change text
end tell
set find text preferences to nothing
set change text preferences to nothing
end tell
end tell
end try
to parseCsvEntry(csvEntry)
set AppleScript's text item delimiters to "\"\""
set {Stuuff} to csvEntry's text items
set AppleScript's text item delimiters to {""}
return {Stuuff}
end parseCsvEntry
Thanks!Thanks, I had re-written and seem to have it working ok but went back to original to test using string instead of text and that seems to work.
Thanks again for the help.
Joe -
Where is the syntax error in my Insert statement?
It says that there is a syntax error in my insert statement, pointing to the .ExecuteNonQuery() at the end:
'Defining the activity ID from the datatable
Dim ActivityID As Integer = DataTableActivities.Rows(0).Item(0)
'Defining the calories from the datatable
Dim calories As Decimal = (DataTableActivities.Rows(0).Item(3)) * (DurationNum.Value / 60)
'Insert statement to add new training events
Dim SqlQueryActivityInsert As String = "INSERT INTO tblTraining (RunnerID, ActivityID, Full_Name, Time, Calories_Burnt, Date) VALUES (@RunnerID, @ActivityID, @Full_Name, @Time, @Calories, @Date)"
Dim SqlCommandActivity As New OleDbCommand
With SqlCommandActivity
.CommandText = SqlQueryActivityInsert
.Parameters.AddWithValue("@RunnerID", LoginForm.UserIDlbl.Text)
.Parameters.AddWithValue("@ActivityID", ActivityID)
.Parameters.AddWithValue("@Full_Name", LoginForm.Full_Namelbl.Text)
.Parameters.AddWithValue("@Time", DurationNum.Value)
.Parameters.AddWithValue("@Calories", calories)
.Parameters.AddWithValue("@Date", WeekPicker.Value)
.Connection = conn
.ExecuteNonQuery()Viorel is right. The 'Date' field is probably throwing it off. Date is a reserved word.
https://www.drupal.org/node/141051
Putting square brackets [] around the field name should get it working for you.
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it. -
Syntax error to run a javaScript
Hi all
I want to run a JavaScript using AppleScript do script method.
First I create a document using
tell application "Adobe InDesign CS5.5"
set myDocument to make document
end tell
Now I run this script
set ScriptPath to alias "HD:private:var:root:Documents:Adobe Scripts:Source1.jsx"
tell application "Adobe InDesign CS5.5"
do script ScriptPath language javascript
end tell
But it give error
error "Adobe InDesign CS5.5 got an error: Syntax error" number 8
I also try :
set ScriptPath to alias "HD:private:var:root:Documents:Adobe Scripts:Source1.jsx"
tell application "Adobe InDesign CS5.5"
set myDocument to make document
do script ScriptPath language javascript
end tell
No compile error
At run time give same error "Adobe InDesign CS5.5 got an error: Syntax error" number 8
If I create document using this:
tell application "Adobe InDesign CS5.5"
set myDocument to make document
end tell
and run Source1.jsx using Extend Script Toolkit CS5.5 then script run sucessfully.
My Java Script is :
#target indesign
var myDocument = app.activeDocument;
with(myDocument.documentPreferences)
pageHeight= "11i";
pageWidth ="8.5i";
facingPages=false;
pageOrientation=PageOrientation.portrait;
pagesPerDocument=1;
var myLayer= myDocument.layers.add();
myLayer.name="myFirstLayer";
myLayer.visible=true;
var masterspread = myDocument.masterSpreads.add(1);
masterspread.baseName="NewMasterPage";
masterspread.select(1919250519);
var myTextFrame=masterspread.textFrames.add(myDocument.layers.item("myFirstLayer"));
myTextFrame.geometricBounds = ["6p", "25p", "30p", "30p"];
myTextFrame.contents = "Master Spread";
I do no understand where is Syntax error.
tell application "Adobe InDesign CS5.5"
do script alias "HD:private:var:root:Documents:Adobe Scripts:Source1.jsx" language javascript
--> error "Syntax error" number 8
Result:
error "Adobe InDesign CS5.5 got an error: Syntax error" number 8
Thanks.Hi Vamitul Thanks for reply
Now script run but i do not understand the behave of script
In Extend Script Toolkit CS5.5 script run sucessfully
with this
var myTextFrame=masterspread.textFrames.add(myDocument.layers.item("myFir stLayer"));
why it give error in AppleScript do script method ?
Thanks -
Syntax error while writing a select query.
Hi all,
I have a requirement where I have to pick a value if the text for that value is
MYCARu2019S Lovliest Car.
And so I wrote a query that
SELECT RUECK INTO XRUECK FROM AFVC WHERE ltxa1 = ' MYCARu2019S Lovliest Car'.
ENDSELECT.
But it gives me a syntax error saying
u201CLiterals taking up more than one line not permittedu201D.
Can some one tell me what is wrong. I need to select RUECK value from AFVC table if
ltxa1 value is ' MYCARu2019S Lovliest Car'.
Kindly help what is going wrong...
Regards,
Jessica SamHi,
Narendran is right use two single quotes.
also careful wile comparing string. i think as you write ltxa1 value is ' MYCARu2019S Lovliest Car'.
so while comparing you must not use space just before staring use the following
SELECT rueck INTO xrueck FROM afvc WHERE ltxa1 = 'MYCAR''S Lovliest Car'. " Not use Space before M
ENDSELECT.
Hope will help you.
Kind Regards,
Faisal -
Select-options in SELECT query - syntax error
Hi all,
I get the error below when I try to use the select options in a SELECT query . Please help me.
"The IN operator with "SO_AWART" is followed neither by an internal
table nor by a value list."
The code i have used(Logical database PNP is used):
TABLES: pernr,
catsdb.
INCLUDE ztime_cwtr_top. " global Data
INCLUDE ztime_cwtr_f01.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS SO_AWART FOR CATSDB-AWART.
PARAMETERS P_THRES TYPE I.
SELECTION-SCREEN END OF BLOCK B1.
Get data from CATSDB table. Workdates within the date interval are considered.
SELECT pernr workdate awart catsquantity beguz enduz status
FROM catsdb
INTO TABLE it_catsdb
WHERE pernr = pernr-pernr AND
workdate GE pn-begda AND
workdate LE pn-endda AND
status IN ('20', '30') AND
awart IN so_awart .
awart IN ('1100', '1137', '1138', '1139', '1140',
'1147', '1148', '1149', '1157', '2003' ).
when I give the values directly i do not get any syntax error, but when I use select options in the where condition I get the syntax error.
I have tried different options like using only the select-options in the where condition.
Thanks in advance.....
MadhuSolved.
Code with syntax error:
include z...top .
include z...fo1.
select-options: xxxxxxx
Code with no syntax error:
select-options: xxxxxxx
include z...top .
include z...fo1.
Thanks for all your help,
Madhu -
Can not use SUM in a simple query because of a syntax error?
Hi
Thank you for reading my post.
I am trying to execute the following query:
q = em.createQuery("SELECT SUM((NE.pipeLength - 0.6)+((NE.networkDepth-NE.initialDepth)*0.41)+ NE.standLenght) FROM NExpansion NE where (( NE.contract.contractor=:contractor) AND (NE.pDiameter=:diameter))");
q.setParameter("contractor", contractor);
q.setParameter("diameter", diameter);
l = (Long) q.getSingleResult();And I get the following error:
Caused by: Exception [TOPLINK-8025] (Oracle TopLink Essentials - 2.0.1 (Build b09d-fcs (12/06/2007))): oracle.toplink.essentials.exceptions.EJBQLException
Exception Description: Syntax error parsing the query [SELECT SUM((NE.pipeLength - 0.6)+((NE.networkDepth-NE.initialDepth)*0.41)+ NE.standLenght) FROM NExpansion NE where (( NE.contract.contractor=:contractor) AND (NE.pDiameter=:diameter))], line 1, column 12: unexpected token [(].
Internal Exception: line 1:12: unexpected token: (
at oracle.toplink.essentials.exceptions.EJBQLException.unexpectedToken(EJBQLException.java:389)
at oracle.toplink.essentials.internal.parsing.ejbql.EJBQLParser.handleANTLRException(EJBQLParser.java:350)
at oracle.toplink.essentials.internal.parsing.ejbql.EJBQLParser.addError(EJBQLParser.java:278)
at oracle.toplink.essentials.internal.parsing.ejbql.EJBQLParser.reportError(EJBQLParser.java:378)
at oracle.toplink.essentials.internal.parsing.ejbql.antlr273.EJBQLParser.aggregateExpression(EJBQLParser.java:1416)
at oracle.toplink.essentials.internal.parsing.ejbql.antlr273.EJBQLParser.selectExpression(EJBQLParser.java:1158)
at oracle.toplink.essentials.internal.parsing.ejbql.antlr273.EJBQLParser.selectClause(EJBQLParser.java:403)
at oracle.toplink.essentials.internal.parsing.ejbql.antlr273.EJBQLParser.selectStatement(EJBQLParser.java:178)
at oracle.toplink.essentials.internal.parsing.ejbql.antlr273.EJBQLParser.document(EJBQLParser.java:135)
at oracle.toplink.essentials.internal.parsing.ejbql.EJBQLParser.parse(EJBQLParser.java:166)
at oracle.toplink.essentials.internal.parsing.ejbql.EJBQLParser.buildParseTree(EJBQLParser.java:127)
at oracle.toplink.essentials.internal.ejb.cmp3.base.EJBQueryImpl.buildEJBQLDatabaseQuery(EJBQueryImpl.java:215)
at oracle.toplink.essentials.internal.ejb.cmp3.base.EJBQueryImpl.buildEJBQLDatabaseQuery(EJBQueryImpl.java:189)
at oracle.toplink.essentials.internal.ejb.cmp3.base.EJBQueryImpl.buildEJBQLDatabaseQuery(EJBQueryImpl.java:153)
at oracle.toplink.essentials.internal.ejb.cmp3.base.EJBQueryImpl.<init>(EJBQueryImpl.java:114)
at oracle.toplink.essentials.internal.ejb.cmp3.base.EJBQueryImpl.<init>(EJBQueryImpl.java:99)
at oracle.toplink.essentials.internal.ejb.cmp3.EJBQueryImpl.<init>(EJBQueryImpl.java:86)
at oracle.toplink.essentials.internal.ejb.cmp3.EntityManagerImpl.createQuery(EntityManagerImpl.java:204)
... 30 more
Caused by: line 1:12: unexpected token: (
at oracle.toplink.essentials.internal.parsing.ejbql.antlr273.EJBQLParser.aggregateExpression(EJBQLParser.java:1365)
... 43 morePlease let me know what am I doing wrong?
Thanks.Hello,
From the grammar in the JPA spec, SUM only takes a state_field_path_expression which is defined as
state_field_path_expression := {identification_variable | single_valued_association_path_expression}.state_field
Please feel free to file an enhancement to have this expanded upon.
Best Regards,
Chris -
Whenever i try to execute the following program, i get the following syntax error.
"ALPHA AND IT-F1 ARE TYPE-INCOMPATIBLE."
data: begin of it occurs 12,
f1,
end of it,
alpha(12) value 'ABCDEFGHIJKL'.
do 12 times varying it-f1 from alpha0 next alpha1.
append it.
enddo.
loop at it.
write: / sy-tabix, it-f1.
endloop.
delete it index 5.
skip.
loop at it.
write: / sy-tabix, it-f1.
endloop.
delete it from 6 to 8.
skip.
loop at it.
write: / sy-tabix, it-f1.
endloop.
delete it where f1 between 'B' and 'D'.
skip.
loop at it.
write: / sy-tabix, it-f1.
endloop.
loop at it where f1 between 'E' and 'J'.
delete it.
endloop.
skip.
loop at it.
write: / sy-tabix, it-f1.
endloop.
read table it with key f1 = 'K' binary search.
write: /, / 'sy-subrc=', sy-subrc, 'sy-tabix=', sy-tabix, / ''.
if sy-subrc = 0.
delete it index sy-tabix.
endif.
skip.
loop at it.
write: / sy-tabix, it-f1.
endloop.
free it.data: begin of it occurs 12,
f1,
alpha(12) value 'ABCDEFGHIJKL',
end of it.
do 12 times varying it-f1 from it-alpha0(1) next it-alpha1(1).
append it.
enddo.
loop at it.
write: / sy-tabix, it-f1.
endloop.
delete it where f1 = 'E'.
skip.
loop at it.
write: / sy-tabix, it-f1.
endloop.
delete it where f1 = 'F'
and f1 = 'H'.
skip.
loop at it.
write: / sy-tabix, it-f1.
endloop.
delete it where f1 between 'B' and 'D'.
skip.
loop at it.
write: / sy-tabix, it-f1.
endloop.
loop at it where f1 between 'E' and 'J'.
delete it.
endloop.
skip.
loop at it.
write: / sy-tabix, it-f1.
endloop.
read table it with key f1 = 'K' binary search.
write: /, / 'sy-subrc=', sy-subrc, 'sy-tabix=', sy-tabix, / ''.
if sy-subrc = 0.
delete it index sy-tabix.
endif.
Edited by: pandu app on Feb 16, 2008 7:12 PM -
Syntax error in program "SAPLXRSA " -SENT
Hi Guys,
I have done user exit in R/3 datasource when I do the test extraction using RSA3 and geting the data without any error. I've transport the requet to Test Box and tried to do the extraction in TestBox and getting the below SYNTAX Error message. Kindly advise it's very URGET. Thanks in advance.
ShrtText
Syntax error in program "SAPLXRSA ".
What happened?
Error in ABAP application program.
The current ABAP program "SAPLRSAP" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "SAPLXRSA ", the following syntax error occurred
in the Include "ZXRSAU01 " in line 21:
"Field "ZOXPRO0043" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
Author and last person to change the Include are:
Author "SAPCHEOLENG "
Last changed by "CCEV200 "
What can you do?
Please eliminate the error by performing a syntax check
(or an extended program check) on the program "SAPLXRSA ".
You can also perform the syntax check from the ABAP/4 Editor.
If the problem persists, proceed as follows:
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
In program "SAPLXRSA ", the following syntax error occurred:
"Field "ZOXPRO0043" is unknown. It is neither in one of the specified t"
"ables nor defined by a "DATA" statement. "DATA" statement."
How to correct the error
Probably the only way to eliminate the error is to correct the program.
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "hawk"
Network address.......... "137.132.12.22"
Operating system......... "HP-UX"
Release.................. "B.11.23"
Hardware type............ "ia64"
Character length......... 8 Bits
Pointer length........... 64 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "hawk"
Database type............ "ORACLE"
Database name............ "QAS"
Database owner........... "SAPR3"
Character set............ "en_US.iso88591"
SAP kernel............... "640"
Created on............... "Oct 16 2006 20:35:55"
Created in............... "HP-UX B.11.23 U ia64"
Database version......... "OCI_920 "
Patch level.............. "153"
Patch text............... " "
Supported environment....
Database................. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE
10.2.0.."
SAP database version..... "640"
Operating system......... "HP-UX B.11"
Memory usage.............
Roll..................... 16128
EM....................... 12569760
Heap..................... 0
Page..................... 65536
MM Used.................. 1716768
MM Free.................. 2470608
SAP Release.............. "640"
User and Transaction
Client.............. 220
User................ "CCEENGG"
Language key........ "E"
Transaction......... "RSA3 "
Program............. "SAPLRSAP"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLRSAP" in
"CALL_DATA_CUSTOMER_FUNCTION".
The main program was "RSFHGEN2 ".
The termination occurred in line 96 of the source code of the (Include)
program "LRSAPF06"
of the source code of program "LRSAPF06" (when calling the editor 960).
Source Code Extract
Line
SourceCde
66
CALL FUNCTION BW_BTE_CALL_BW204010_E
67
EXPORTING
68
I_DATASOURCE = L_DATASOURCE
69
I_UPDMODE = P_UPDMODE
70
TABLES
71
I_T_SELECT = P_T_SELECT
72
I_T_FIELDS = P_T_FIELDS
73
C_T_DATA = P_T_DATA
74
C_T_MESSAGES = L_T_MESSAGES
75
EXCEPTIONS
76
OTHERS = 1.
77
DESCRIBE TABLE P_T_DATA LINES L_LINES.
78
MESSAGE S408 WITH L_LINES.
79
Handle BTE-Exit error messages
80
IF SY-SUBRC <> 0.
81
P_SUBRC = SY-SUBRC.
82
IF 1 = 2. MESSAGE E021 WITH ''. ENDIF.
83
MESSAGE_WRITE 'E' 'R3' '021' 'BW_BTE_CALL_BW204010_E' '' '' ''.
84
ENDIF.
85
IF NOT L_T_MESSAGES IS INITIAL.
86
PERFORM WRITE_BTE_EXIT_MESSAGES TABLES L_T_MESSAGES
87
CHANGING P_SUBRC.
88
ENDIF.
89
ENDIF.
90
ENDIF.
91
92
Call Customer-Exit
93
DESCRIBE TABLE P_T_DATA LINES L_LINES.
94
MESSAGE S407 WITH 'EXIT_SAPLRSAP_001' 'CMOD' L_LINES.
95
CLEAR SY-SUBRC.
>>>>>
CALL CUSTOMER-FUNCTION '001'
97
EXPORTING
98
I_DATASOURCE = L_DATASOURCE
99
I_ISOURCE = L_12B_SOURCE
100
I_UPDMODE = P_UPDMODE
101
TABLES
102
I_T_SELECT = P_T_SELECT
103
I_T_FIELDS = P_T_FIELDS
104
C_T_DATA = P_T_DATA
105
C_T_MESSAGES = L_T_MESSAGES
106
EXCEPTIONS
107
RSAP_CUSTOMER_EXIT_ERROR = 1
108
OTHERS = 2.
109
DESCRIBE TABLE P_T_DATA LINES L_LINES.
110
MESSAGE S408 WITH L_LINES.
111
112
Handle Customer-Exit error messages
113
IF SY-SUBRC <> 0.
114
P_SUBRC = SY-SUBRC.
115
IF 1 = 2. MESSAGE E020 WITH ''. ENDIF.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
1
SY-TABIX
1
SY-DBCNT
0
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Report for the extractor call
SY-MSGTY
S
SY-MSGID
R3
SY-MSGNO
407
SY-MSGV1
EXIT_SAPLRSAP_001
SY-MSGV2
CMOD
SY-MSGV3
100
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
5 FUNCTION SAPLRSAP LRSAPF06 96
CALL_DATA_CUSTOMER_FUNCTION
4 FORM SAPLRSAP LRSAPF06 96
CALL_DATA_CUSTOMER_FUNCTION
3 FORM GP3PDR0GQDXJ0ZOA35DPGNCU80M GP3PDR0GQDXJ0ZOA35DPGNCU80M 274
PROCESS_DATA_PACKAGE
2 FORM GP3PDR0GQDXJ0ZOA35DPGNCU80M GP3PDR0GQDXJ0ZOA35DPGNCU80M 170
DATA_TRANSFER
1 EVENT RSFHGEN2 RSFHGEN2 59
START-OF-SELECTIONHello Raja,
I think some objects should still lying in the dev. server which are yet to be transported, also try to deactivate and reactivate the project for user exit for BW and transport it .
Also manually request can be created for transporting object "ZOXPRO0043" into quality environment and transport it .
Let us know the output for the same.
Hope that helps.
Regards
Kapadia
***Assigning points is the way to say thanks in SDN.*** -
[SOLVED] Php.ini syntax error, unexpected '&'
Hi guys,
I'm having a trouble setting up a local hosted LAMP, I want to enable the error reporting and display, but it's giving me this error:
[root@albert albert]# php
PHP: syntax error, unexpected '&' in /etc/php/php.ini on line 105
Line 105:
; error_reporting
Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED ; this is the 105
Development Value: E_ALL
Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
And when I access to on localhost/phpmyadmin:
Fatal error: Call to undefined function PMA_DBI_num_rows() in /usr/share/webapps/phpMyAdmin/libraries/navigation/Nodes/Node.class.php on line 408
When I comment the line 105,106,107, it works as I expected, but I can't see any error output...
Here it's the entire php.ini:
[PHP]
; About php.ini ;
; PHP's initialization file, generally called php.ini, is responsible for
; configuring many of the aspects of PHP's behavior.
; PHP attempts to find and load this configuration from a number of locations.
; The following is a summary of its search order:
; 1. SAPI module specific location.
; 2. The PHPRC environment variable. (As of PHP 5.2.0)
; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)
; 4. Current working directory (except CLI)
; 5. The web server's directory (for SAPI modules), or directory of PHP
; (otherwise in Windows)
; 6. The directory from the --with-config-file-path compile time option, or the
; Windows directory (C:\windows or C:\winnt)
; See the PHP docs for more specific information.
; http://php.net/configuration.file
; The syntax of the file is extremely simple. Whitespace and lines
; beginning with a semicolon are silently ignored (as you probably guessed).
; Section headers (e.g. [Foo]) are also silently ignored, even though
; they might mean something in the future.
; Directives following the section heading [PATH=/www/mysite] only
; apply to PHP files in the /www/mysite directory. Directives
; following the section heading [HOST=www.example.com] only apply to
; PHP files served from www.example.com. Directives set in these
; special sections cannot be overridden by user-defined INI files or
; at runtime. Currently, [PATH=] and [HOST=] sections only work under
; CGI/FastCGI.
; http://php.net/ini.sections
; Directives are specified using the following syntax:
; directive = value
; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
; Directives are variables used to configure PHP or PHP extensions.
; There is no name validation. If PHP can't find an expected
; directive because it is not set or is mistyped, a default value will be used.
; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a
; previously set variable or directive (e.g. ${foo})
; Expressions in the INI file are limited to bitwise operators and parentheses:
; | bitwise OR
; ^ bitwise XOR
; & bitwise AND
; ~ bitwise NOT
; ! boolean NOT
; Boolean flags can be turned on using the values 1, On, True or Yes.
; They can be turned off using the values 0, Off, False or No.
; An empty string can be denoted by simply not writing anything after the equal
; sign, or by using the None keyword:
; foo = ; sets foo to an empty string
; foo = None ; sets foo to an empty string
; foo = "None" ; sets foo to the string 'None'
; If you use constants in your value, and these constants belong to a
; dynamically loaded extension (either a PHP extension or a Zend extension),
; you may only use these constants *after* the line that loads the extension.
; About this file ;
; PHP comes packaged with two INI files. One that is recommended to be used
; in production environments and one that is recommended to be used in
; development environments.
; php.ini-production contains settings which hold security, performance and
; best practices at its core. But please be aware, these settings may break
; compatibility with older or less security conscience applications. We
; recommending using the production ini in production and testing environments.
; php.ini-development is very similar to its production variant, except it's
; much more verbose when it comes to errors. We recommending using the
; development version only in development environments as errors shown to
; application users can inadvertently leak otherwise secure information.
; Quick Reference ;
; The following are all the settings which are different in either the production
; or development versions of the INIs with respect to PHP's default behavior.
; Please see the actual settings later in the document for more details as to why
; we recommend these changes in PHP's behavior.
; display_errors
Default Value: On
Development Value: On
Production Value: Off
; display_startup_errors
Default Value: Off
Development Value: On
Production Value: Off
; error_reporting
Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
Development Value: E_ALL
Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
; html_errors
Default Value: On
Development Value: On
Production value: On
; log_errors
Default Value: Off
Development Value: On
Production Value: On
; max_input_time
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)
; output_buffering
; Default Value: Off
; Development Value: 4096
; Production Value: 4096
; register_argc_argv
; Default Value: On
; Development Value: Off
; Production Value: Off
; request_order
; Default Value: None
; Development Value: "GP"
; Production Value: "GP"
; session.bug_compat_42
; Default Value: On
; Development Value: On
; Production Value: Off
; session.bug_compat_warn
; Default Value: On
; Development Value: On
; Production Value: Off
; session.gc_divisor
; Default Value: 100
; Development Value: 1000
; Production Value: 1000
; session.hash_bits_per_character
; Default Value: 4
; Development Value: 5
; Production Value: 5
; short_open_tag
; Default Value: On
; Development Value: Off
; Production Value: Off
; track_errors
; Default Value: Off
; Development Value: On
; Production Value: Off
; url_rewriter.tags
; Default Value: "a=href,area=href,frame=src,form=,fieldset="
; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
; variables_order
; Default Value: "EGPCS"
; Development Value: "GPCS"
; Production Value: "GPCS"
; php.ini Options ;
; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"
;user_ini.filename = ".user.ini"
; To disable this feature set this option to empty value
;user_ini.filename =
; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)
;user_ini.cache_ttl = 300
; Language Options ;
; Enable the PHP scripting language engine under Apache.
; http://php.net/engine
engine = On
; This directive determines whether or not PHP will recognize code between
; <? and ?> tags as PHP source which should be processed as such. It's been
; recommended for several years that you not use the short tag "short cut" and
; instead to use the full <?php and ?> tag combination. With the wide spread use
; of XML and use of these tags by other languages, the server can become easily
; confused and end up parsing the wrong code in the wrong context. But because
; this short cut has been a feature for such a long time, it's currently still
; supported for backwards compatibility, but we recommend you don't use them.
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/short-open-tag
short_open_tag = Off
; Allow ASP-style <% %> tags.
; http://php.net/asp-tags
asp_tags = Off
; The number of significant digits displayed in floating point numbers.
; http://php.net/precision
precision = 14
; Output buffering is a mechanism for controlling how much output data
; (excluding headers and cookies) PHP should keep internally before pushing that
; data to the client. If your application's output exceeds this setting, PHP
; will send that data in chunks of roughly the size you specify.
; Turning on this setting and managing its maximum buffer size can yield some
; interesting side-effects depending on your application and web server.
; You may be able to send headers and cookies after you've already sent output
; through print or echo. You also may see performance benefits if your server is
; emitting less packets due to buffered output versus PHP streaming the output
; as it gets it. On production servers, 4096 bytes is a good setting for performance
; reasons.
; Note: Output buffering can also be controlled via Output Buffering Control
; functions.
; Possible Values:
; On = Enabled and buffer is unlimited. (Use with caution)
; Off = Disabled
; Integer = Enables the buffer and sets its maximum size in bytes.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: Off
; Development Value: 4096
; Production Value: 4096
; http://php.net/output-buffering
output_buffering = 4096
; You can redirect all of the output of your scripts to a function. For
; example, if you set output_handler to "mb_output_handler", character
; encoding will be transparently converted to the specified encoding.
; Setting any output handler automatically turns on output buffering.
; Note: People who wrote portable scripts should not depend on this ini
; directive. Instead, explicitly set the output handler using ob_start().
; Using this ini directive may cause problems unless you know what script
; is doing.
; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
; Note: output_handler must be empty if this is set 'On' !!!!
; Instead you must use zlib.output_handler.
; http://php.net/output-handler
;output_handler =
; Transparent output compression using the zlib library
; Valid values for this option are 'off', 'on', or a specific buffer size
; to be used for compression (default is 4KB)
; Note: Resulting chunk size may vary due to nature of compression. PHP
; outputs chunks that are few hundreds bytes each as a result of
; compression. If you prefer a larger chunk size for better
; performance, enable output_buffering in addition.
; Note: You need to use zlib.output_handler instead of the standard
; output_handler, or otherwise the output will be corrupted.
; http://php.net/zlib.output-compression
zlib.output_compression = Off
; http://php.net/zlib.output-compression-level
;zlib.output_compression_level = -1
; You cannot specify additional output handlers if zlib.output_compression
; is activated here. This setting does the same as output_handler but in
; a different order.
; http://php.net/zlib.output-handler
;zlib.output_handler =
; Implicit flush tells PHP to tell the output layer to flush itself
; automatically after every output block. This is equivalent to calling the
; PHP function flush() after each and every call to print() or echo() and each
; and every HTML block. Turning this option on has serious performance
; implications and is generally recommended for debugging purposes only.
; http://php.net/implicit-flush
; Note: This directive is hardcoded to On for the CLI SAPI
implicit_flush = Off
; The unserialize callback function will be called (with the undefined class'
; name as parameter), if the unserializer finds an undefined class
; which should be instantiated. A warning appears if the specified function is
; not defined, or if the function doesn't include/implement the missing class.
; So only set this entry, if you really want to implement such a
; callback-function.
unserialize_callback_func =
; When floats & doubles are serialized store serialize_precision significant
; digits after the floating point. The default value ensures that when floats
; are decoded with unserialize, the data will remain the same.
serialize_precision = 17
; open_basedir, if set, limits all file operations to the defined directory
; and below. This directive makes most sense if used in a per-directory
; or per-virtualhost web server configuration file. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/open-basedir
open_basedir = /srv/http/:/home/:/tmp/:/usr/share/pear/:/usr/share/webapps/:/home/albert/Dropbox/bitday/
; This directive allows you to disable certain functions for security reasons.
; It receives a comma-delimited list of function names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/disable-functions
disable_functions =
; This directive allows you to disable certain classes for security reasons.
; It receives a comma-delimited list of class names. This directive is
; *NOT* affected by whether Safe Mode is turned On or Off.
; http://php.net/disable-classes
disable_classes =
; Colors for Syntax Highlighting mode. Anything that's acceptable in
; <span style="color: ???????"> would work.
; http://php.net/syntax-highlighting
;highlight.string = #DD0000
;highlight.comment = #FF9900
;highlight.keyword = #007700
;highlight.default = #0000BB
;highlight.html = #000000
; If enabled, the request will be allowed to complete even if the user aborts
; the request. Consider enabling it if executing long requests, which may end up
; being interrupted by the user or a browser timing out. PHP's default behavior
; is to disable this feature.
; http://php.net/ignore-user-abort
;ignore_user_abort = On
; Determines the size of the realpath cache to be used by PHP. This value should
; be increased on systems where PHP opens many files to reflect the quantity of
; the file operations performed.
; http://php.net/realpath-cache-size
;realpath_cache_size = 16k
; Duration of time, in seconds for which to cache realpath information for a given
; file or directory. For systems with rarely changing files, consider increasing this
; value.
; http://php.net/realpath-cache-ttl
;realpath_cache_ttl = 120
; Enables or disables the circular reference collector.
; http://php.net/zend.enable-gc
zend.enable_gc = On
; If enabled, scripts may be written in encodings that are incompatible with
; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such
; encodings. To use this feature, mbstring extension must be enabled.
; Default: Off
;zend.multibyte = Off
; Allows to set the default encoding for the scripts. This value will be used
; unless "declare(encoding=...)" directive appears at the top of the script.
; Only affects if zend.multibyte is set.
; Default: ""
;zend.script_encoding =
; Miscellaneous ;
; Decides whether PHP may expose the fact that it is installed on the server
; (e.g. by adding its signature to the Web server header). It is no security
; threat in any way, but it makes it possible to determine whether you use PHP
; on your server or not.
; http://php.net/expose-php
expose_php = On
; Resource Limits ;
; Maximum execution time of each script, in seconds
; http://php.net/max-execution-time
; Note: This directive is hardcoded to 0 for the CLI SAPI
max_execution_time = 30
; Maximum amount of time each script may spend parsing request data. It's a good
; idea to limit this time on productions servers in order to eliminate unexpectedly
; long running scripts.
; Note: This directive is hardcoded to -1 for the CLI SAPI
; Default Value: -1 (Unlimited)
; Development Value: 60 (60 seconds)
; Production Value: 60 (60 seconds)
; http://php.net/max-input-time
max_input_time = 60
; Maximum input variable nesting level
; http://php.net/max-input-nesting-level
;max_input_nesting_level = 64
; How many GET/POST/COOKIE input variables may be accepted
; max_input_vars = 1000
; Maximum amount of memory a script may consume (128MB)
; http://php.net/memory-limit
memory_limit = 128M
; Error handling and logging ;
; This directive informs PHP of which errors, warnings and notices you would like
; it to take action for. The recommended way of setting values for this
; directive is through the use of the error level constants and bitwise
; operators. The error level constants are below here for convenience as well as
; some common settings and their meanings.
; By default, PHP is set to take action on all errors, notices and warnings EXCEPT
; those related to E_NOTICE and E_STRICT, which together cover best practices and
; recommended coding standards in PHP. For performance reasons, this is the
; recommend error reporting setting. Your production server shouldn't be wasting
; resources complaining about best practices and coding standards. That's what
; development servers and development settings are for.
; Note: The php.ini-development file has this setting as E_ALL. This
; means it pretty much reports everything which is exactly what you want during
; development and early testing.
; Error Level Constants:
; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)
; E_ERROR - fatal run-time errors
; E_RECOVERABLE_ERROR - almost fatal run-time errors
; E_WARNING - run-time warnings (non-fatal errors)
; E_PARSE - compile-time parse errors
; E_NOTICE - run-time notices (these are warnings which often result
; from a bug in your code, but it's possible that it was
; intentional (e.g., using an uninitialized variable and
; relying on the fact it's automatically initialized to an
; empty string)
; E_STRICT - run-time notices, enable to have PHP suggest changes
; to your code which will ensure the best interoperability
; and forward compatibility of your code
; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
; initial startup
; E_COMPILE_ERROR - fatal compile-time errors
; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
; E_USER_ERROR - user-generated error message
; E_USER_WARNING - user-generated warning message
; E_USER_NOTICE - user-generated notice message
; E_DEPRECATED - warn about code that will not work in future versions
; of PHP
; E_USER_DEPRECATED - user-generated deprecation warnings
; Common Values:
; E_ALL (Show all errors, warnings and notices including coding standards.)
; E_ALL & ~E_NOTICE (Show all errors, except for notices)
; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)
; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)
; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED
; Development Value: E_ALL
; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT
; http://php.net/error-reporting
error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
; This directive controls whether or not and where PHP will output errors,
; notices and warnings too. Error output is very useful during development, but
; it could be very dangerous in production environments. Depending on the code
; which is triggering the error, sensitive information could potentially leak
; out of your application such as database usernames and passwords or worse.
; It's recommended that errors be logged on production servers rather than
; having the errors sent to STDOUT.
; Possible Values:
; Off = Do not display any errors
; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)
; On or stdout = Display errors to STDOUT
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/display-errors
display_errors = Off
; The display of errors which occur during PHP's startup sequence are handled
; separately from display_errors. PHP's default behavior is to suppress those
; errors from clients. Turning the display of startup errors on can be useful in
; debugging configuration problems. But, it's strongly recommended that you
; leave this setting off on production servers.
; Default Value: Off
; Development Value: On
; Production Value: Off
; http://php.net/display-startup-errors
display_startup_errors = Off
; Besides displaying errors, PHP can also log errors to locations such as a
; server-specific log, STDERR, or a location specified by the error_log
; directive found below. While errors should not be displayed on productions
; servers they should still be monitored and logging is a great way to do that.
; Default Value: Off
; Development Value: On
; Production Value: On
; http://php.net/log-errors
log_errors = On
; Set maximum length of log_errors. In error_log information about the source is
; added. The default is 1024 and 0 allows to not apply any maximum length at all.
; http://php.net/log-errors-max-len
log_errors_max_len = 1024
; Do not log repeated messages. Repeated errors must occur in same file on same
; line unless ignore_repeated_source is set true.
; http://php.net/ignore-repeated-errors
ignore_repeated_errors = Off
; Ignore source of message when ignoring repeated messages. When this setting
; is On you will not log errors with repeated messages from different files or
; source lines.
; http://php.net/ignore-repeated-source
ignore_repeated_source = Off
; If this parameter is set to Off, then memory leaks will not be shown (on
; stdout or in the log). This has only effect in a debug compile, and if
; error reporting includes E_WARNING in the allowed list
; http://php.net/report-memleaks
report_memleaks = On
; This setting is on by default.
;report_zend_debug = 0
; Store the last error/warning message in $php_errormsg (boolean). Setting this value
; to On can assist in debugging and is appropriate for development servers. It should
; however be disabled on production servers.
; Default Value: Off
; Development Value: On
; Production Value: Off
; http://php.net/track-errors
track_errors = Off
; Turn off normal error reporting and emit XML-RPC error XML
; http://php.net/xmlrpc-errors
;xmlrpc_errors = 0
; An XML-RPC faultCode
;xmlrpc_error_number = 0
; When PHP displays or logs an error, it has the capability of formatting the
; error message as HTML for easier reading. This directive controls whether
; the error message is formatted as HTML or not.
; Note: This directive is hardcoded to Off for the CLI SAPI
; Default Value: On
; Development Value: On
; Production value: On
; http://php.net/html-errors
html_errors = On
; If html_errors is set to On *and* docref_root is not empty, then PHP
; produces clickable error messages that direct to a page describing the error
; or function causing the error in detail.
; You can download a copy of the PHP manual from http://php.net/docs
; and change docref_root to the base URL of your local copy including the
; leading '/'. You must also specify the file extension being used including
; the dot. PHP's default behavior is to leave these settings empty, in which
; case no links to documentation are generated.
; Note: Never use this feature for production boxes.
; http://php.net/docref-root
; Examples
;docref_root = "/phpmanual/"
; http://php.net/docref-ext
;docref_ext = .html
; String to output before an error message. PHP's default behavior is to leave
; this setting blank.
; http://php.net/error-prepend-string
; Example:
;error_prepend_string = "<span style='color: #ff0000'>"
; String to output after an error message. PHP's default behavior is to leave
; this setting blank.
; http://php.net/error-append-string
; Example:
;error_append_string = "</span>"
; Log errors to specified file. PHP's default behavior is to leave this value
; empty.
; http://php.net/error-log
; Example:
;error_log = php_errors.log
; Log errors to syslog (Event Log on NT, not valid in Windows 95).
;error_log = syslog
;windows.show_crt_warning
; Default value: 0
; Development value: 0
; Production value: 0
; Data Handling ;
; The separator used in PHP generated URLs to separate arguments.
; PHP's default setting is "&".
; http://php.net/arg-separator.output
; Example:
;arg_separator.output = "&"
; List of separator(s) used by PHP to parse input URLs into variables.
; PHP's default setting is "&".
; NOTE: Every character in this directive is considered as separator!
; http://php.net/arg-separator.input
; Example:
;arg_separator.input = ";&"
; This directive determines which super global arrays are registered when PHP
; starts up. G,P,C,E & S are abbreviations for the following respective super
; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty
; paid for the registration of these arrays and because ENV is not as commonly
; used as the others, ENV is not recommended on productions servers. You
; can still get access to the environment variables through getenv() should you
; need to.
; Default Value: "EGPCS"
; Development Value: "GPCS"
; Production Value: "GPCS";
; http://php.net/variables-order
variables_order = "GPCS"
; This directive determines which super global data (G,P,C,E & S) should
; be registered into the super global array REQUEST. If so, it also determines
; the order in which that data is registered. The values for this directive are
; specified in the same manner as the variables_order directive, EXCEPT one.
; Leaving this value empty will cause PHP to use the value set in the
; variables_order directive. It does not mean it will leave the super globals
; array REQUEST empty.
; Default Value: None
; Development Value: "GP"
; Production Value: "GP"
; http://php.net/request-order
request_order = "GP"
; This directive determines whether PHP registers $argv & $argc each time it
; runs. $argv contains an array of all the arguments passed to PHP when a script
; is invoked. $argc contains an integer representing the number of arguments
; that were passed when the script was invoked. These arrays are extremely
; useful when running scripts from the command line. When this directive is
; enabled, registering these variables consumes CPU cycles and memory each time
; a script is executed. For performance reasons, this feature should be disabled
; on production servers.
; Note: This directive is hardcoded to On for the CLI SAPI
; Default Value: On
; Development Value: Off
; Production Value: Off
; http://php.net/register-argc-argv
register_argc_argv = Off
; When enabled, the ENV, REQUEST and SERVER variables are created when they're
; first used (Just In Time) instead of when the script starts. If these
; variables are not used within a script, having this directive on will result
; in a performance gain. The PHP directive register_argc_argv must be disabled
; for this directive to have any affect.
; http://php.net/auto-globals-jit
auto_globals_jit = On
; Whether PHP will read the POST data.
; This option is enabled by default.
; Most likely, you won't want to disable this option globally. It causes $_POST
; and $_FILES to always be empty; the only way you will be able to read the
; POST data will be through the php://input stream wrapper. This can be useful
; to proxy requests or to process the POST data in a memory efficient fashion.
; http://php.net/enable-post-data-reading
;enable_post_data_reading = Off
; Maximum size of POST data that PHP will accept.
; Its value may be 0 to disable the limit. It is ignored if POST data reading
; is disabled through enable_post_data_reading.
; http://php.net/post-max-size
post_max_size = 8M
; Automatically add files before PHP document.
; http://php.net/auto-prepend-file
auto_prepend_file =
; Automatically add files after PHP document.
; http://php.net/auto-append-file
auto_append_file =
; By default, PHP will output a character encoding using
; the Content-type: header. To disable sending of the charset, simply
; set it to be empty.
; PHP's built-in default is text/html
; http://php.net/default-mimetype
default_mimetype = "text/html"
; PHP's default character set is set to empty.
; http://php.net/default-charset
;default_charset = "UTF-8"
; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is
; to disable this feature. If post reading is disabled through
; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.
; http://php.net/always-populate-raw-post-data
;always_populate_raw_post_data = On
; Paths and Directories ;
; UNIX: "/path1:/path2"
include_path = ".:/usr/share/pear"
; Windows: "\path1;\path2"
;include_path = ".;c:\php\includes"
; PHP's default setting for include_path is ".;/path/to/php/pear"
; http://php.net/include-path
; The root of the PHP pages, used only if nonempty.
; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
; if you are running php as a CGI under any web server (other than IIS)
; see documentation for security issues. The alternate is to use the
; cgi.force_redirect configuration below
; http://php.net/doc-root
doc_root =
; The directory under which PHP opens the script using /~username used only
; if nonempty.
; http://php.net/user-dir
user_dir =
; Directory in which the loadable extensions (modules) reside.
; http://php.net/extension-dir
extension_dir = "/usr/lib/php/modules/"
; On windows:
; extension_dir = "ext"
; Whether or not to enable the dl() function. The dl() function does NOT work
; properly in multithreaded servers, such as IIS or Zeus, and is automatically
; disabled on them.
; http://php.net/enable-dl
enable_dl = Off
; cgi.force_redirect is necessary to provide security running PHP as a CGI under
; most web servers. Left undefined, PHP turns this on by default. You can
; turn it off here AT YOUR OWN RISK
; **You CAN safely turn this off for IIS, in fact, you MUST.**
; http://php.net/cgi.force-redirect
;cgi.force_redirect = 1
; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
; every request. PHP's default behavior is to disable this feature.
;cgi.nph = 1
; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
; will look for to know it is OK to continue execution. Setting this variable MAY
; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
; http://php.net/cgi.redirect-status-env
;cgi.redirect_status_env =
; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting
; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
; http://php.net/cgi.fix-pathinfo
;cgi.fix_pathinfo=1
; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
; security tokens of the calling client. This allows IIS to define the
; security context that the request runs under. mod_fastcgi under Apache
; does not currently support this feature (03/17/2002)
; Set to 1 if running under IIS. Default is zero.
; http://php.net/fastcgi.impersonate
;fastcgi.impersonate = 1
; Disable logging through FastCGI connection. PHP's default behavior is to enable
; this feature.
;fastcgi.logging = 0
; cgi.rfc2616_headers configuration option tells PHP what type of headers to
; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
; is supported by Apache. When this option is set to 1 PHP will send
; RFC2616 compliant header.
; Default is zero.
; http://php.net/cgi.rfc2616-headers
;cgi.rfc2616_headers = 0
; File Uploads ;
; Whether to allow HTTP file uploads.
; http://php.net/file-uploads
file_uploads = On
; Temporary directory for HTTP uploaded files (will use system default if not
; specified).
; http://php.net/upload-tmp-dir
;upload_tmp_dir =
; Maximum allowed size for uploaded files.
; http://php.net/upload-max-filesize
upload_max_filesize = 2M
; Maximum number of files that can be uploaded via a single request
max_file_uploads = 20
; Fopen wrappers ;
; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
; http://php.net/allow-url-fopen
allow_url_fopen = On
; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
; http://php.net/allow-url-include
allow_url_include = Off
; Define the anonymous ftp password (your email address). PHP's default setting
; for this is empty.
; http://php.net/from
;from="[email protected]"
; Define the User-Agent string. PHP's default setting for this is empty.
; http://php.net/user-agent
;user_agent="PHP"
; Default timeout for socket based streams (seconds)
; http://php.net/default-socket-timeout
default_socket_timeout = 60
; If your scripts have to deal with files from Macintosh systems,
; or you are running on a Mac and need to deal with files from
; unix or win32 systems, setting this flag will cause PHP to
; automatically detect the EOL character in those files so that
; fgets() and file() will work regardless of the source of the file.
; http://php.net/auto-detect-line-endings
;auto_detect_line_endings = Off
; Dynamic Extensions ;
; If you wish to have an extension loaded automatically, use the following
; syntax:
; extension=modulename.extension
; For example, on Windows:
; extension=msql.dll
; ... or under UNIX:
; extension=msql.so
; ... or with a path:
; extension=/path/to/extension/msql.so
; If you only provide the name of the extension, PHP will look for it in its
; default extension directory.
;extension=bcmath.so
;extension=bz2.so
;extension=calendar.so
extension=curl.so
;extension=dba.so
;extension=enchant.so
;extension=exif.so
;extension=ftp.so
;extension=gd.so
extension=gettext.so
;extension=gmp.so
;extension=iconv.so
;extension=imap.so
;extension=intl.so
;extension=ldap.so
;extension=mcrypt.so
;extension=mssql.so
;extension=mysqli.so
;extension=mysql.so
;extension=odbc.so
;extension=openssl.so
;extension=pdo_mysql.so
;extension=pdo_odbc.so
;extension=pdo_pgsql.so
;extension=pdo_sqlite.so
;extension=pgsql.so
;extension=phar.so
;extension=posix.so
;extension=pspell.so
;extension=shmop.so
;extension=snmp.so
;extension=soap.so
;extension=sockets.so
;extension=sqlite3.so
;extension=sysvmsg.so
;extension=sysvsem.so
;extension=sysvshm.so
;extension=tidy.so
;extension=xmlrpc.so
;extension=xsl.so
;extension=zip.so
; Module Settings ;
[CLI Server]
; Whether the CLI web server uses ANSI color coding in its terminal output.
cli_server.color = On
[Date]
; Defines the default timezone used by the date functions
; http://php.net/date.timezone
;date.timezone =
; http://php.net/date.default-latitude
;date.default_latitude = 31.7667
; http://php.net/date.default-longitude
;date.default_longitude = 35.2333
; http://php.net/date.sunrise-zenith
;date.sunrise_zenith = 90.583333
; http://php.net/date.sunset-zenith
;date.sunset_zenith = 90.583333
[filter]
; http://php.net/filter.default
;filter.default = unsafe_raw
; http://php.net/filter.default-flags
;filter.default_flags =
[iconv]
;iconv.input_encoding = ISO-8859-1
;iconv.internal_encoding = ISO-8859-1
;iconv.output_encoding = ISO-8859-1
[intl]
;intl.default_locale =
; This directive allows you to produce PHP errors when some error
; happens within intl functions. The value is the level of the error produced.
; Default is 0, which does not produce any errors.
;intl.error_level = E_WARNING
[sqlite]
; http://php.net/sqlite.assoc-case
;sqlite.assoc_case = 0
[sqlite3]
;sqlite3.extension_dir =
[Pcre]
;PCRE library backtracking limit.
; http://php.net/pcre.backtrack-limit
;pcre.backtrack_limit=100000
;PCRE library recursion limit.
;Please note that if you set this value to a high number you may consume all
;the available process stack and eventually crash PHP (due to reaching the
;stack size limit imposed by the Operating System).
; http://php.net/pcre.recursion-limit
;pcre.recursion_limit=100000
[Pdo]
; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"
; http://php.net/pdo-odbc.connection-pooling
;pdo_odbc.connection_pooling=strict
;pdo_odbc.db2_instance_name
[Pdo_mysql]
; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/pdo_mysql.cache_size
pdo_mysql.cache_size = 2000
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/pdo_mysql.default-socket
pdo_mysql.default_socket=
[Phar]
; http://php.net/phar.readonly
;phar.readonly = On
; http://php.net/phar.require-hash
;phar.require_hash = On
;phar.cache_list =
[mail function]
; For Win32 only.
; http://php.net/smtp
SMTP = localhost
; http://php.net/smtp-port
smtp_port = 25
; For Win32 only.
; http://php.net/sendmail-from
;sendmail_from = [email protected]
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
; http://php.net/sendmail-path
;sendmail_path =
; Force the addition of the specified parameters to be passed as extra parameters
; to the sendmail binary. These parameters will always replace the value of
; the 5th parameter to mail(), even in safe mode.
;mail.force_extra_parameters =
; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename
mail.add_x_header = On
; The path to a log file that will log all mail() calls. Log entries include
; the full path of the script, line number, To address and headers.
;mail.log =
; Log mail to syslog (Event Log on NT, not valid in Windows 95).
;mail.log = syslog
[SQL]
; http://php.net/sql.safe-mode
sql.safe_mode = Off
[ODBC]
; http://php.net/odbc.default-db
;odbc.default_db = Not yet implemented
; http://php.net/odbc.default-user
;odbc.default_user = Not yet implemented
; http://php.net/odbc.default-pw
;odbc.default_pw = Not yet implemented
; Controls the ODBC cursor model.
; Default: SQL_CURSOR_STATIC (default).
;odbc.default_cursortype
; Allow or prevent persistent links.
; http://php.net/odbc.allow-persistent
odbc.allow_persistent = On
; Check that a connection is still valid before reuse.
; http://php.net/odbc.check-persistent
odbc.check_persistent = On
; Maximum number of persistent links. -1 means no limit.
; http://php.net/odbc.max-persistent
odbc.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/odbc.max-links
odbc.max_links = -1
; Handling of LONG fields. Returns number of bytes to variables. 0 means
; passthru.
; http://php.net/odbc.defaultlrl
odbc.defaultlrl = 4096
; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
; of odbc.defaultlrl and odbc.defaultbinmode
; http://php.net/odbc.defaultbinmode
odbc.defaultbinmode = 1
;birdstep.max_links = -1
[Interbase]
; Allow or prevent persistent links.
ibase.allow_persistent = 1
; Maximum number of persistent links. -1 means no limit.
ibase.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
ibase.max_links = -1
; Default database name for ibase_connect().
;ibase.default_db =
; Default username for ibase_connect().
;ibase.default_user =
; Default password for ibase_connect().
;ibase.default_password =
; Default charset for ibase_connect().
;ibase.default_charset =
; Default timestamp format.
ibase.timestampformat = "%Y-%m-%d %H:%M:%S"
; Default date format.
ibase.dateformat = "%Y-%m-%d"
; Default time format.
ibase.timeformat = "%H:%M:%S"
[MySQL]
; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
; http://php.net/mysql.allow_local_infile
mysql.allow_local_infile = On
; Allow or prevent persistent links.
; http://php.net/mysql.allow-persistent
mysql.allow_persistent = On
; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/mysql.cache_size
mysql.cache_size = 2000
; Maximum number of persistent links. -1 means no limit.
; http://php.net/mysql.max-persistent
mysql.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/mysql.max-links
mysql.max_links = -1
; Default port number for mysql_connect(). If unset, mysql_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
; http://php.net/mysql.default-port
mysql.default_port =
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/mysql.default-socket
mysql.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
; http://php.net/mysql.default-host
mysql.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
; http://php.net/mysql.default-user
mysql.default_user =
; Default password for mysql_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
; http://php.net/mysql.default-password
mysql.default_password =
; Maximum time (in seconds) for connect timeout. -1 means no limit
; http://php.net/mysql.connect-timeout
mysql.connect_timeout = 60
; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
; SQL-Errors will be displayed.
; http://php.net/mysql.trace-mode
mysql.trace_mode = Off
[MySQLi]
; Maximum number of persistent links. -1 means no limit.
; http://php.net/mysqli.max-persistent
mysqli.max_persistent = -1
; Allow accessing, from PHP's perspective, local files with LOAD DATA statements
; http://php.net/mysqli.allow_local_infile
;mysqli.allow_local_infile = On
; Allow or prevent persistent links.
; http://php.net/mysqli.allow-persistent
mysqli.allow_persistent = On
; Maximum number of links. -1 means no limit.
; http://php.net/mysqli.max-links
mysqli.max_links = -1
; If mysqlnd is used: Number of cache slots for the internal result set cache
; http://php.net/mysqli.cache_size
mysqli.cache_size = 2000
; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
; compile-time value defined MYSQL_PORT (in that order). Win32 will only look
; at MYSQL_PORT.
; http://php.net/mysqli.default-port
mysqli.default_port = 3306
; Default socket name for local MySQL connects. If empty, uses the built-in
; MySQL defaults.
; http://php.net/mysqli.default-socket
mysqli.default_socket =
; Default host for mysql_connect() (doesn't apply in safe mode).
; http://php.net/mysqli.default-host
mysqli.default_host =
; Default user for mysql_connect() (doesn't apply in safe mode).
; http://php.net/mysqli.default-user
mysqli.default_user =
; Default password for mysqli_connect() (doesn't apply in safe mode).
; Note that this is generally a *bad* idea to store passwords in this file.
; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
; and reveal this password! And of course, any users with read access to this
; file will be able to reveal the password as well.
; http://php.net/mysqli.default-pw
mysqli.default_pw =
; Allow or prevent reconnect
mysqli.reconnect = Off
[mysqlnd]
; Enable / Disable collection of general statistics by mysqlnd which can be
; used to tune and monitor MySQL operations.
; http://php.net/mysqlnd.collect_statistics
mysqlnd.collect_statistics = On
; Enable / Disable collection of memory usage statistics by mysqlnd which can be
; used to tune and monitor MySQL operations.
; http://php.net/mysqlnd.collect_memory_statistics
mysqlnd.collect_memory_statistics = Off
; Size of a pre-allocated buffer used when sending commands to MySQL in bytes.
; http://php.net/mysqlnd.net_cmd_buffer_size
;mysqlnd.net_cmd_buffer_size = 2048
; Size of a pre-allocated buffer used for reading data sent by the server in
; bytes.
; http://php.net/mysqlnd.net_read_buffer_size
;mysqlnd.net_read_buffer_size = 32768
[OCI8]
; Connection: Enables privileged connections using external
; credentials (OCI_SYSOPER, OCI_SYSDBA)
; http://php.net/oci8.privileged-connect
;oci8.privileged_connect = Off
; Connection: The maximum number of persistent OCI8 connections per
; process. Using -1 means no limit.
; http://php.net/oci8.max-persistent
;oci8.max_persistent = -1
; Connection: The maximum number of seconds a process is allowed to
; maintain an idle persistent connection. Using -1 means idle
; persistent connections will be maintained forever.
; http://php.net/oci8.persistent-timeout
;oci8.persistent_timeout = -1
; Connection: The number of seconds that must pass before issuing a
; ping during oci_pconnect() to check the connection validity. When
; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
; pings completely.
; http://php.net/oci8.ping-interval
;oci8.ping_interval = 60
; Connection: Set this to a user chosen connection class to be used
; for all pooled server requests with Oracle 11g Database Resident
; Connection Pooling (DRCP). To use DRCP, this value should be set to
; the same string for all web servers running the same application,
; the database pool must be configured, and the connection string must
; specify to use a pooled server.
;oci8.connection_class =
; High Availability: Using On lets PHP receive Fast Application
; Notification (FAN) events generated when a database node fails. The
; database must also be configured to post FAN events.
;oci8.events = Off
; Tuning: This option enables statement caching, and specifies how
; many statements to cache. Using 0 disables statement caching.
; http://php.net/oci8.statement-cache-size
;oci8.statement_cache_size = 20
; Tuning: Enables statement prefetching and sets the default number of
; rows that will be fetched automatically after statement execution.
; http://php.net/oci8.default-prefetch
;oci8.default_prefetch = 100
; Compatibility. Using On means oci_close() will not close
; oci_connect() and oci_new_connect() connections.
; http://php.net/oci8.old-oci-close-semantics
;oci8.old_oci_close_semantics = Off
[PostgreSQL]
; Allow or prevent persistent links.
; http://php.net/pgsql.allow-persistent
pgsql.allow_persistent = On
; Detect broken persistent links always with pg_pconnect().
; Auto reset feature requires a little overheads.
; http://php.net/pgsql.auto-reset-persistent
pgsql.auto_reset_persistent = Off
; Maximum number of persistent links. -1 means no limit.
; http://php.net/pgsql.max-persistent
pgsql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
; http://php.net/pgsql.max-links
pgsql.max_links = -1
; Ignore PostgreSQL backends Notice message or not.
; Notice message logging require a little overheads.
; http://php.net/pgsql.ignore-notice
pgsql.ignore_notice = 0
; Log PostgreSQL backends Notice message or not.
; Unless pgsql.ignore_notice=0, module cannot log notice message.
; http://php.net/pgsql.log-notice
pgsql.log_notice = 0
[Sybase-CT]
; Allow or prevent persistent links.
; http://php.net/sybct.allow-persistent
sybct.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
; http://php.net/sybct.max-persistent
sybct.max_persistent = -1
; Maximum number of links (persistent + non-persistent). -1 means no limit.
; http://php.net/sybct.max-links
sybct.max_links = -1
; Minimum server message severity to display.
; http://php.net/sybct.min-server-severity
sybct.min_server_severity = 10
; Minimum client message severity to display.
; http://php.net/sybct.min-client-severity
sybct.min_client_severity = 10
; Set per-context timeout
; http://php.net/sybct.timeout
;sybct.timeout=
;sybct.packet_size
; The maximum time in seconds to wait for a connection attempt to succeed before returning failure.
; Default: one minute
;sybct.login_timeout=
; The name of the host you claim to be connecting from, for display by sp_who.
; Default: none
;sybct.hostname=
; Allows you to define how often deadlocks are to be retried. -1 means "forever".
; Default: 0
;sybct.deadlock_retry_count=
[bcmath]
; Number of decimal digits for all bcmath functions.
; http://php.net/bcmath.scale
bcmath.scale = 0
[browscap]
; http://php.net/browscap
;browscap = extra/browscap.ini
[Session]
; Handler used to store/retrieve data.
; http://php.net/session.save-handler
session.save_handler = files
; Argument passed to save_handler. In the case of files, this is the path
; where data files are stored. Note: Windows users have to change this
; variable in order to use PHP's session functions.
; The path can be defined as:
; session.save_path = "N;/path"
; where N is an integer. Instead of storing all the session files in
; /path, what this will do is use subdirectories N-levels deep, and
; store the session data in those directories. This is useful if you
; or your OS have problems with lots of files in one directory, and is
; a more efficient layout for servers that handle lots of sessions.
; NOTE 1: PHP will not create this directory structure automatically.
; You can use the script in the ext/session dir for that purpose.
; NOTE 2: See the section on garbage collection below if you choose to
; use subdirectories for session storage
; The file storage module creates files using mode 600 by default.
; You can change that by using
; session.save_path = "N;MODE;/path"
; where MODE is the octal representation of the mode. Note that this
; does not overwrite the process's umask.
; http://php.net/session.save-path
;session.save_path = "/tmp"
; Whether to use cookies.
; http://php.net/session.use-cookies
session.use_cookies = 1
; http://php.net/session.cookie-secure
;session.cookie_secure =
; This option forces PHP to fetch and use a cookie for storing and maintaining
; the session id. We encourage this operation as it's very helpful in combating
; session hijacking when not specifying and managing your own session id. It is
; not the end all be all of session hijacking defense, but it's a good start.
; http://php.net/session.use-only-cookies
session.use_only_cookies = 1
; Name of the session (used as cookie name).
; http://php.net/session.name
session.name = PHPSESSID
; Initialize session on request startup.
; http://php.net/session.auto-start
session.auto_start = 0
; Lifetime in seconds of cookie or, if 0, until browser is restarted.
; http://php.net/session.cookie-lifetime
session.cookie_lifetime = 0
; The path for which the cookie is valid.
; http://php.net/session.cookie-path
session.cookie_path = /
; The domain for which the cookie is valid.
; http://php.net/session.cookie-domain
session.cookie_domain =
; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
; http://php.net/session.cookie-httponly
session.cookie_httponly =
; Handler used to serialize data. php is the standard serializer of PHP.
; http://php.net/session.serialize-handler
session.serialize_handler = php
; Defines the probability that the 'garbage collection' process is started
; on every session initialization. The probability is calculated by using
; gc_probability/gc_divisor. Where session.gc_probability is the numerator
; and gc_divisor is the denominator in the equation. Setting this value to 1
; when the session.gc_divisor value is 100 will give you approximately a 1% chance
; the gc will run on any give request.
; Default Value: 1
; Development Value: 1
; Production Value: 1
; http://php.net/session.gc-probability
session.gc_probability = 1
; Defines the probability that the 'garbage collection' process is started on every
; session initialization. The probability is calculated by using the following equation:
; gc_probability/gc_divisor. Where session.gc_probability is the numerator and
; session.gc_divisor is the denominator in the equation. Setting this value to 1
; when the session.gc_divisor value is 100 will give you approximately a 1% chance
; the gc will run on any give request. Increasing this value to 1000 will give you
; a 0.1% chance the gc will run on any give request. For high volume production servers,
; this is a more efficient approach.
; Default Value: 100
; Development Value: 1000
; Production Value: 1000
; http://php.net/session.gc-divisor
session.gc_divisor = 1000
; After this number of seconds, stored data will be seen as 'garbage' and
; cleaned up by the garbage collection process.
; http://php.net/session.gc-maxlifetime
session.gc_maxlifetime = 1440
; NOTE: If you are using the subdirectory option for storing session files
; (see session.save_path above), then garbage collection does *not*
; happen automatically. You will need to do your own garbage
; collection through a shell script, cron entry, or some other method.
; For example, the following script would is the equivalent of
; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
; find /path/to/sessions -cmin +24 | xargs rm
; PHP 4.2 and less have an undocumented feature/bug that allows you to
; to initialize a session variable in the global scope.
; PHP 4.3 and later will warn you, if this feature is used.
; You can disable the feature and the warning separately. At this time,
; the warning is only displayed, if bug_compat_42 is enabled. This feature
; introduces some serious security problems if not handled correctly. It's
; recommended that you do not use this feature on production servers. But you
; should enable this on development servers and enable the warning as well. If you
; do not enable the feature on development servers, you won't be warned when it's
; used and debugging errors caused by this can be difficult to track down.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/session.bug-compat-42
session.bug_compat_42 = Off
; This setting controls whether or not you are warned by PHP when initializing a
; session value into the global space. session.bug_compat_42 must be enabled before
; these warnings can be issued by PHP. See the directive above for more information.
; Default Value: On
; Development Value: On
; Production Value: Off
; http://php.net/session.bug-compat-warn
session.bug_compat_warn = Off
; Check HTTP Referer to invalidate externally stored URLs containing ids.
; HTTP_REFERER has to contain this substring for the session to be
; considered as valid.
; http://php.net/session.referer-check
session.referer_check =
; How many bytes to read from the file.
; http://php.net/session.entropy-length
;session.entropy_length = 32
; Specified here to create the session id.
; http://php.net/session.entropy-file
; Defaults to /dev/urandom
; On systems that don't have /dev/urandom but do have /dev/arandom, this will default to /dev/arandom
; If neither are found at compile time, the default is no entropy file.
; On windows, setting the entropy_length setting will activate the
; Windows random source (using the CryptoAPI)
;session.entropy_file = /dev/urandom
; Set to {nocache,private,public,} to determine HTTP caching aspects
; or leave this empty to avoid sending anti-caching headers.
; http://php.net/session.cache-limiter
session.cache_limiter = nocache
; Document expires after n minutes.
; http://php.net/session.cache-expire
session.cache_expire = 180
; trans sid support is disabled by default.
; Use of trans sid may risk your users security.
; Use this option with caution.
; - User may send URL contains active session ID
; to other person via. email/irc/etc.
; - URL that contains active session ID may be stored
; in publicly accessible computer.
; - User may access your site with the same session ID
; always using URL stored in browser's history or bookmarks.
; http://php.net/session.use-trans-sid
session.use_trans_sid = 0
; Select a hash function for use in generating session ids.
; Possible Values
; 0 (MD5 128 bits)
; 1 (SHA-1 160 bits)
; This option may also be set to the name of any hash function supported by
; the hash extension. A list of available hashes is returned by the hash_algos()
; function.
; http://php.net/session.hash-function
session.hash_function = 0
; Define how many bits are stored in each character when converting
; the binary hash data to something readable.
; Possible values:
; 4 (4 bits: 0-9, a-f)
; 5 (5 bits: 0-9, a-v)
; 6 (6 bits: 0-9, a-z, A-Z, "-", ",")
; Default Value: 4
; Development Value: 5
; Production Value: 5
; http://php.net/session.hash-bits-per-character
session.hash_bits_per_character = 5
; The URL rewriter will look for URLs in a defined set of HTML tags.
; form/fieldset are special; if you include them here, the rewriter will
; add a hidden <input> field with the info which is otherwise appended
; to URLs. If you want XHTML conformity, remove the form entry.
; Note that all valid entries require a "=", even if no value follows.
; Default Value: "a=href,area=href,frame=src,form=,fieldset="
; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"
; http://php.net/url-rewriter.tags
url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
; Enable upload progress tracking in $_SESSION
; Default Value: On
; Development Value: On
; Production Value: On
; http://php.net/session.upload-progress.enabled
;session.upload_progress.enabled = On
; Cleanup the progress information as soon as all POST data has been read
; (i.e. upload completed).
; Default Value: On
; Development Value: On
; Production Value: On
; http://php.net/session.upload-progress.cleanup
;session.upload_progress.cleanup = On
; A prefix used for the upload progress key in $_SESSION
; Default Value: "upload_progress_"
; Development Value: "upload_progress_"
; Production Value: "upload_progress_"
; http://php.net/session.upload-progress.prefix
;session.upload_progress.prefix = "upload_progress_"
; The index name (concatenated with the prefix) in $_SESSION
; containing the upload progress information
; Default Value: "PHP_SESSION_UPLOAD_PROGRESS"
; Development Value: "PHP_SESSION_UPLOAD_PROGRESS"
; Production Value: "PHP_SESSION_UPLOAD_PROGRESS"
; http://php.net/session.upload-progress.name
;session.upload_progress.name = "PHP_SESSION_UPLOAD_PROGRESS"
; How frequently the upload progress should be updated.
; Given either in percentages (per-file), or in bytes
; Default Value: "1%"
; Development Value: "1%"
; Production Value: "1%"
; http://php.net/session.upload-progress.freq
;session.upload_progress.freq = "1%"
; The minimum delay between updates, in seconds
; Default Value: 1
; Development Value: 1
; Production Value: 1
; http://php.net/session.upload-progress.min-freq
;session.upload_progress.min_freq = "1"
[MSSQL]
; Allow or prevent persistent links.
mssql.allow_persistent = On
; Maximum number of persistent links. -1 means no limit.
mssql.max_persistent = -1
; Maximum number of links (persistent+non persistent). -1 means no limit.
mssql.max_links = -1
; Minimum error severity to display.
mssql.min_error_severity = 10
; Minimum message severity to display.
mssql.min_message_severity = 10
; Compatibility mode with old versions of PHP 3.0.
mssql.compatability_mode = Off
; Connect timeout
;mssql.connect_timeout = 5
; Query timeout
;mssql.timeout = 60
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textlimit = 4096
; Valid range 0 - 2147483647. Default = 4096.
;mssql.textsize = 4096
; Limits the number of records in each batch. 0 = all records in one batch.
;mssql.batchsize = 0
; Specify how datetime and datetim4 columns are returned
; On => Returns data converted to SQL server settings
; Off => Returns values as YYYY-MM-DD hh:mm:ss
;mssql.datetimeconvert = On
; Use NT authentication when connecting to the server
mssql.secure_connection = Off
; Specify max number of processes. -1 = library default
; msdlib defaults to 25
; FreeTDS defaults to 4096
;mssql.max_procs = -1
; Specify client character set.
; If empty or not set the client charset from freetds.conf is used
; This is only used when compiled with FreeTDS
;mssql.charset = "ISO-8859-1"
[Assertion]
; Assert(expr); active by default.
; http://php.net/assert.active
;assert.active = On
; Issue a PHP warning for each failed assertion.
; http://php.net/assert.warning
;assert.warning = On
; Don't bail out by default.
; http://php.net/assert.bail
;assert.bail = Off
; User-function to be called if an assertion fails.
; http://php.net/assert.callback
;assert.callback = 0
; Eval the expression with current error_reporting(). Set to true if you want
; error_reporting(0) around the eval().
; http://php.net/assert.quiet-eval
;assert.quiet_eval = 0
[COM]
; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
; http://php.net/com.typelib-file
;com.typelib_file =
; allow Distributed-COM calls
; http://php.net/com.allow-dcom
;com.allow_dcom = true
; autoregister constants of a components typlib on com_load()
; http://php.net/com.autoregister-typelib
;com.autoregister_typelib = true
; register constants casesensitive
; http://php.net/com.autoregister-casesensitive
;com.autoregister_casesensitive = false
; show warnings on duplicate constant registrations
; http://php.net/com.autoregister-verbose
;com.autoregister_verbose = true
; The default character set code-page to use when passing strings to and from COM objects.
; Default: system ANSI code page
;com.code_page=
[mbstring]
; language for internal character representation.
; http://php.net/mbstring.language
;mbstring.language = Japanese
; internal/script encoding.
; Some encoding cannot work as internal encoding.
; (e.g. SJIS, BIG5, ISO-2022-*)
; http://php.net/mbstring.internal-encoding
;mbstring.internal_encoding = EUC-JP
; http input encoding.
; http://php.net/mbstring.http-input
;mbstring.http_input = auto
; http output encoding. mb_output_handler must be
; registered as output buffer to function
; http://php.net/mbstring.http-output
;mbstring.http_output = SJIS
; enable automatic encoding translation according to
; mbstring.internal_encoding setting. Input chars are
; converted to internal encoding by setting this to On.
; Note: Do _not_ use automatic encoding translation for
; portable libs/applications.
; http://php.net/mbstring.encoding-translation
;mbstring.encoding_translation = Off
; automatic encoding detection order.
; auto means
; http://php.net/mbstring.detect-order
;mbstring.detect_order = auto
; substitute_character used when character cannot be converted
; one from another
; http://php.net/mbstring.substitute-character
;mbstring.substitute_character = none;
; overload(replace) single byte functions by mbstring functions.
; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
; etc. Possible values are 0,1,2,4 or combination of them.
; For example, 7 for overload everything.
; 0: No overload
; 1: Overload mail() function
; 2: Overload str*() functions
; 4: Overload ereg*() functions
; http://php.net/mbstring.func-overload
;mbstring.func_overload = 0
; enable strict encoding detection.
;mbstring.strict_detection = Off
; This directive specifies the regex pattern of content types for which mb_output_handler()
; is activated.
; Default: mbstring.http_output_conv_mimetype=^(text/|application/xhtml\+xml)
;mbstring.http_output_conv_mimetype=
[gd]
; Tell the jpeg decode to ignore warnings and try to create
; a gd image. The warning will then be displayed as notices
; disabled by default
; http://php.net/gd.jpeg-ignore-warning
;gd.jpeg_ignore_warning = 0
[exif]
; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
; With mbstring support this will automatically be converted into the encoding
; given by corresponding encode setting. When empty mbstring.internal_encoding
; is used. For the decode settingsHi, everything in the "Quick Reference" section should be commented out with ;
You should change those settings further down in the php.ini file.
Example:
error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT
display_errors = Off
Last edited by adrianx (2013-07-26 12:32:02)
Maybe you are looking for
-
HI Experts, In aletrs im getting this error so please can any one suggest me how to solve this issue. Alert for NESAP to FTM interface Created Runtime Workbench Service User on 13.09.2010 18:20:28 Alert ID: ##18625## The message ID DF
-
Where to get a converter for a USA bought 1st Gen ipad?
Hi there My friend from the States left us with a 1st Generation Ipad but it won'r charge with our UK charger. When here they used some kind of converter unit...can anyone tell me what this is....and send me a link to buy one cheaply in the UK...???
-
how to erase in Adobe draw
-
Incorrect exchange rate for Actual cost documents
Dear all experts, I have an actual cost documents which was created on 02.10.2006,it should be taking the value date for currency exchange as 01.09.2006,but it is taking 01. 04.2006 hence it resulting in picking wrong exchange rate.Any solution to
-
Hi, When i use submit button i am able to access cpQuizInfoAnswerChoice variable in the next slide. But if i use Subimit All and click on next, variable cpQuizInfoAnswerChoice is empty in the next slide. How can i access selected answer if i use subm