Syntax Error while Posting Material

Hi,
when posting material the system is throwing a message
Syntax error in program RGIMF000
in Include RGIMF000
in Line 1328
Last changed by SAP*
Author SAP
The data object "GLU1" does not have a component called
"RSPONSORED_CLASS".
Is there anyway to solve this?
Regards,
Ajit

Please look at the SAP note : 656431
Hope this helps you ...
Symptom
When you post data, the system terminates with a syntax error in program RGIMF000.
The error indicates that data object GLU1 does not have a component named RSPONSORED_CLASS.
Reason and Prerequisites
The cause is for this problem not completely clear yet.
Probably program RGZZGLUX, which is to be automatically started for the postprocessing after a system copy, has not run completely or has not run at all.
Solution
Check your postprocessing logs to see whether or not program RGZZGLUX has run correctly.
If the program has not run at all or with errors, inform SAP and indicate how to find the log.
To eliminate the syntax error, call Transaction SE38 and start program RGZZGLUX for generating structure GLU1 and FI-SL programs.
It takes a maximum of 5 minutes for the program to carry out the generations.
Make sure that NO ONE is working in the PRODUCTION system at this time, otherwise documents posted then may disappear. If you are using a test system, this should not be a problem since it is only test data.
If the problems are still not solved after the successful run of program RGZZGLUX, contact SAP Support again.

Similar Messages

Error while posting material in MB1c

Hi
how to open finace period in OB52 for period for 002/2009 as am getting error while posting in MB1c the error which am getting are period 002/2009 is not open for account type s and G/L 799999.
Kindly help.
Thanx.

Hi Mukesh
In OB52, you dont specify the GL account, you just open periods for the sub modules within FI.
However, If you are getting an error while posting MB1c it must definitely be due to the MM periods not being opened
Please go to MMRV - input your co code, and execute, it will tell you the current period which is open
If your current period is not open, go to MMPV, input ur co code or codes, enter the new period and execute.
This should solve your problem
Rukshana

Error while posting material using transaction code MB1C

Hi Experts,
While I am trying to post material into warehouse its giving warning message initially as : MAT IS A MISS PART MRP CONTROLLER KNUITZ WILL BE NOTIFIED
MESSAGE NO: M7133
Diagnosis
Material is a missing part of plant
when I am pressing enter Its giving an error message as : MATERIAL DOES NOT EXIST IN WAREHOUSE
MESSAGE NO: L9023
All the materials that you use within a warehouse no must also be defined for this warehouse no.
Can Any one please explain me how to resolve this error in detail.
Thankyou
SAHER

Dear Siraj,
I have extended the material to warehouse numbers as you suggested. Then I got error as: WM MOVEMENT TYPE 561 IS NOT ALLOWED FOR WAREHOUSE NUMBER.
then I defined moment type in Logistic Execution -->shipping ---> picking --> Lean WM ---> Define moment types
Now its giving new error after defining the moment type for store location as: STORAGE BIN DOES NOT EXIST
MESSAGE: L9009
Thank you,
SAHER.

Error while posting depot excise invoice

Dear SAP Experts,
We are continually facing the following error while posting "Depot
Excise Invoice" on Production sever
"Error in allocating Depot Invoice number interval not found Number
object J_1IDEPINV"
Message no is 8I336
We have already maintained the number interval for the above object i.e
J_1IDEPINV with respective series group 62.
Here is the business process:
1. First, we make transfer posting thr MB1B. We get material doc no
2. Second, we make selection for RG23D for this material doc thr J1IJ.
RG 23D register gets updated
3. Third, we make verify/post thr J1IJ itself. Here we are getting the
error when we post it.
Please do needful.
Its an urgent isue
Regards
Tushar

hello,
In transaction SNRO check number range for object J_1IDEPINV. There you choose number intervals abd check number intervals.
Regards
Kedar Kulkarni

Error while creating material

I got an error while creating material "Material does not exist or not activated". Can anybody help me.
BR//
Irf

hi
I think you have posted your question in wrong place.
Can you please make your question more clear.
regards!
ramesh
Edited by: Ramesh kumar.p on Feb 22, 2010 12:48 PM
Edited by: Ramesh kumar.p on Feb 22, 2010 12:50 PM

Syntax error while creating a standard order

Hi All,
I created a projet in CMOD and than added the enhancement V45A0002.The components shown as EXIT_SAPMV45A_002(Predefined sold to party when making the standard order),i double click on the exit and entered into the function module.After that i double clicked on the include ZXVVZU04 and entered in and wrote E_KUNNR=100171
While activating i got error msg 'The last statement is not complete (period missing)." & i have saved inspite the error .After that i tried to create a order and program terminated error came after entering sold to party no. in sales order
so now i have deactivated the project which i created in CMOD & deleted it aswell,than also i am getting the syntax error while making the order thru VA01.I want to come out of this please.
I would be great ful if somebody helps me *** out of this syntax error.
Thanks
Rishi

Hi Rishi
As you are getting message that "The last statement is not complete (period missing)", check in your assigned project in CMOD the last statement , what is the last statement maintained in that project
Secondly also check the closing period and the current period. as it is giving in the message that "The last statement is not complete (period missing)".So check the current period and check the period maintained in the CMOD
It would be better if you take ABAP'ers help . So post in ABAP forum
Regards
Srinath

Error while posting FBS1 via BAPI

Hi Experts,
getting below error while posting FBS1 via BAPI_ACC_DOCUMENT_POST
TYPE ID                   NUMBER MESSAGE
E   |RW                  |609   Error in document: BKPF 10000022440GF3032010 TERCLNT303
E   |RW                  |609   Error in document: 100000224 AC_DOC_NO
FB03 Header values --
Document Number 100000250        Company Code    40GF         Fiscal Year     2010
Document Date   30.11.2010       Posting Date    30.11.2010   Period          11
Currency EUR
FB03 Line item 1 ( posting key 40 )
G/L Account     711014
Company Code    40GF
Amount          100,00 EUR
Cost Center     40GF219001
Quantity        0,000
FB03 Line item 2 ( posting key 50 )
G/L Account     167005
Company Code    40GF
Amount          100,00 EUR
Assignment      20101130
Text            ITEM TEXT 7
Please tell me what i am missing in below code because of which i am getting error in return table
FORM fill_header.
CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
    IMPORTING
      own_logical_system = gd_documentheader-obj_sys.
gd_documentheader-obj_type   = 'BKPF'.
gd_documentheader-obj_key    = '10000022440GF3032010'.
gd_documentheader-username   = sy-uname.
gd_documentheader-header_txt = 'BAPI Test'.               "#EC NOTEXT
gd_documentheader-obj_key_r =
GD_DOCUMENTHEADER-reason_rev = '05' .
gd_documentheader-comp_code = '40GF'.
GD_DOCUMENTHEADER-AC_DOC_NO = '100000224' .
gd_documentheader-fisc_year = '2010'.
gd_documentheader-doc_date   = sy-datum.
gd_documentheader-pstng_date = sy-datum.
GD_DOCUMENTHEADER-TRANS_DATE =
GD_DOCUMENTHEADER-VALUE_DATE =
GD_DOCUMENTHEADER-FIS_PERIOD = '11' .
GD_DOCUMENTHEADER-DOC_TYPE   = 'SA' .
GD_DOCUMENTHEADER-REF_DOC_NO =
GD_DOCUMENTHEADER-COMPO_ACC =
gd_documentheader-bus_act    = 'RFBU'.
ENDFORM.                    "fill_header
FORM fill_currencyamount.
CLEAR T_currencyamount.
T_currencyamount-itemno_acc   = 1.
T_currencyamount-curr_type    = '00'.
T_currencyamount-currency     = 'EUR'.
T_currencyamount-amt_doccur   = -100.
APPEND T_currencyamount.
CLEAR T_currencyamount.
T_currencyamount-itemno_acc   = 2.
T_currencyamount-curr_type    = '00'.
T_currencyamount-currency     = 'EUR'.
T_currencyamount-amt_doccur   = '100'.
APPEND T_currencyamount.
CLEAR T_currencyamount.
ENDFORM.                    "fill_currencyamount
FORM fill_accountgl.
CLEAR T_accountgl.
T_accountgl-itemno_acc     = 1.
T_accountgl-gl_account     = '0000711014'.
T_ACCOUNTGL-ACCT_TYPE      = 'S' .
T_ACCOUNTGL-DOC_TYPE       = 'SA' .
T_accountgl-DE_CRE_IND     = 'S' .
T_accountgl-tax_code       = 'V1'.
T_ACCOUNTGL-ACCT_KEY       =
T_accountgl-item_text      = 'BAPI Test G/L line item'. "#EC NOTEXT
T_ACCOUNTGL-BUS_AREA       =
T_accountgl-costcenter     = '40GF219001' .
T_ACCOUNTGL-ORDERID        =
T_ACCOUNTGL-MATERIAL       =
T_ACCOUNTGL-QUANTITY       =
T_ACCOUNTGL-BASE_UOM       =
T_ACCOUNTGL-BASE_UOM_ISO   =
T_ACCOUNTGL-PLANT          =
T_accountgl-profIT_ctr     = 'S001' .
T_ACCOUNTGL-WBS_ELEMENT    =
T_ACCOUNTGL-BILL_TYPE      =
T_ACCOUNTGL-DISTR_CHAN     =
T_accountgl-ac_doc_no      =
T_accountgl-acct_type      =
T_accountgl-doc_type       =
T_accountgl-comp_code      = '40GF' .
T_accountgl-func_area      =
T_accountgl-plant          =
T_accountgl-fis_period     = '11' .
T_accountgl-fisc_year      = '2010' .
T_accountgl-pstng_date     =
T_accountgl-value_date     =
T_accountgl-customer       =
T_accountgl-vendor_no      =
T_accountgl-costobject     =
T_accountgl-acttype        =
T_accountgl-val_area       =
T_accountgl-po_number      =
T_accountgl-po_item        =
APPEND T_accountgl to t_accountg2 .
CLEAR T_accountgl.
T_accountgl-itemno_acc     = 2.
T_accountgl-gl_account     = '0000167005'.
T_ACCOUNTGL-STAT_CON       =
T_ACCOUNTGL-REF_KEY_1      =
T_ACCOUNTGL-REF_KEY_2      =
T_ACCOUNTGL-REF_KEY_3      =
T_ACCOUNTGL-ACCT_TYPE      = 'S' .
T_ACCOUNTGL-DOC_TYPE       = 'SA' .
T_accountgl-DE_CRE_IND     = 'H' .
T_accountgl-tax_code       = 'V1'.
T_ACCOUNTGL-ACCT_KEY       =
T_accountgl-item_text      = 'ITEM TEXT 7'. "#EC NOTEXT
T_ACCOUNTGL-BUS_AREA       =
T_accountgl-costcenter     = '40GF219001' .
T_ACCOUNTGL-ORDERID        =
T_ACCOUNTGL-MATERIAL       =
T_ACCOUNTGL-QUANTITY       =
T_ACCOUNTGL-BASE_UOM       =
T_ACCOUNTGL-BASE_UOM_ISO   =
T_ACCOUNTGL-PLANT          =
T_accountgl-profIT_ctr     = 'S001' .
T_ACCOUNTGL-WBS_ELEMENT    =
T_accountgl-ac_doc_no      =
T_accountgl-acct_type      =
T_accountgl-doc_type       =
T_accountgl-comp_code      = '40GF' .
T_accountgl-func_area      =
T_accountgl-plant          =
T_accountgl-fis_period     = '11' .
T_accountgl-fisc_year      = '2010' .
T_accountgl-pstng_date     =
T_accountgl-value_date     =
T_accountgl-customer       =
T_accountgl-vendor_no      =
T_accountgl-costobject     =
T_accountgl-acttype        =
T_accountgl-val_area       =
T_accountgl-po_number      =
T_accountgl-po_item        =
APPEND T_accountgl to t_accountg2 .
ENDFORM.                    "fill_accountgl

Hi Experts,
getting below error while posting FBS1 via BAPI_ACC_DOCUMENT_POST
TYPE ID                   NUMBER MESSAGE
E   |RW                  |609   Error in document: BKPF 10000022440GF3032010 TERCLNT303
E   |RW                  |609   Error in document: 100000224 AC_DOC_NO
FB03 Header values --
Document Number 100000250          Company Code    40GF         Fiscal Year     2010
Document Date   30.11.2010           Posting Date    30.11.2010   Period          11
Currency EUR
FB03 Line item 1 ( posting key 40 )
G/L Account     711014
Company Code    40GF
Amount          100,00 EUR
Cost Center     40GF219001
Quantity        0,000
FB03 Line item 2 ( posting key 50 )
G/L Account     167005
Company Code    40GF
Amount          100,00 EUR
Assignment      20101130
Text            ITEM TEXT 7
Please tell me what i am missing in below code because of which i am getting error in return table
FORM fill_header.
CALL FUNCTION 'OWN_LOGICAL_SYSTEM_GET'
    IMPORTING
      own_logical_system = gd_documentheader-obj_sys.
gd_documentheader-obj_type   = 'BKPF'.
gd_documentheader-obj_key    = '10000022440GF3032010'.
gd_documentheader-username   = sy-uname
gd_documentheader-obj_key_r =
GD_DOCUMENTHEADER-reason_rev = '05' .
gd_documentheader-comp_code = '40GF'.
GD_DOCUMENTHEADER-AC_DOC_NO = '100000224' .
gd_documentheader-fisc_year = '2010'.
gd_documentheader-doc_date   = sy-datum.
gd_documentheader-pstng_date = sy-datum.
GD_DOCUMENTHEADER-FIS_PERIOD = '11' .
GD_DOCUMENTHEADER-DOC_TYPE   = 'SA' .
gd_documentheader-bus_act    = 'RFBU'.
ENDFORM.                    "fill_header
FORM fill_currencyamount.
CLEAR T_currencyamount.
T_currencyamount-itemno_acc   = 1.
T_currencyamount-curr_type    = '00'.
T_currencyamount-currency     = 'EUR'.
T_currencyamount-amt_doccur   = -100.
APPEND T_currencyamount.
CLEAR T_currencyamount.
T_currencyamount-itemno_acc   = 2.
T_currencyamount-curr_type    = '00'.
T_currencyamount-currency     = 'EUR'.
T_currencyamount-amt_doccur   = '100'.
APPEND T_currencyamount.
CLEAR T_currencyamount.
ENDFORM.                    "fill_currencyamount
FORM fill_accountgl.
CLEAR T_accountgl.
T_accountgl-itemno_acc     = 1.
T_accountgl-gl_account     = '0000711014'.
T_ACCOUNTGL-ACCT_TYPE      = 'S' .
T_ACCOUNTGL-DOC_TYPE       = 'SA' .
T_accountgl-item_text      = 'BAPI Test 1'.
T_accountgl-costcenter     = '40GF219001' .
T_accountgl-profIT_ctr     = 'S001' .
T_accountgl-fis_period     = '11' .
T_accountgl-fisc_year      = '2010' .
APPEND T_accountgl to t_accountg2 .
CLEAR T_accountgl.
T_accountgl-itemno_acc     = 2.
T_accountgl-gl_account     = '0000167005'.
T_ACCOUNTGL-ACCT_TYPE      = 'S' .
T_ACCOUNTGL-DOC_TYPE       = 'SA' .
T_accountgl-item_text      = 'ITEM TEXT 7'.
T_accountgl-comp_code      = '40GF' .
T_accountgl-fis_period     = '11' .
T_accountgl-fisc_year      = '2010' .
APPEND T_accountgl to t_accountg2 .
ENDFORM.                    "fill_accountgl

MIGO error while posting..!!!

H Alli,
Getting below error while posting in MIGO:
"Account 413501 requires an assignment to a CO object"
Regards,
Amit

Hi
Check whether profit centre is assigned to your material at sales general plant data
If not , then give profit centre and create a fresh cycle and see
Regards
Raja

Error while posting a write up for asset belonging to affiliated company

Hi,
I am facing an error while posting a write up for an asset which belong to an affiliated company. Error is
Transaction type 790 not possible (posting to affiliated company)
Message no. AA390
I am using Transaction type 711 which is linked to 790 in custo. Kinldy let me know how to resolve this issue.
Thanks
Pragya

Hi
According to this note for document type used, we should not select the 'inter company posting' or 'enter trading partner indicator'
but as i m doing writeup for asset belonging to affiliated company, so i need to set this indicator. the document type used is standard AA
Is there any other way, to resolve the issue
Thanks
Pragya

Tax code error while posting Planned delivery costs in Import Scenario

Hi!!!!!
I am getting on error while posting Planned delivery costs in MIRO for Import Purchase Order with zero value tax code v0. The error is
"Tax code V0 country IN does not exist in procedure ZAXINN"
For Import I defined a pricing procedure which contains all condition types for CVD, Ecess, SEcess, Additional Customs Duty and Others.
While making Import PO im putting V0 tax code. I assigned the Tax Codes to the Company code.
Please let me know what config is missing.
Regards,
Durga

Is you ZAXINN assigned to the country India
and is your taxcode (created in FTXP) created for country India?
kr
hakan

Error while posting the parked document in ECC 6.0

Hello ABAPers,
After upgrade from R/3 4.6c to ECC 6.0, when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT".
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes i.e it shows only 4-5 rows and hence only 4 tax types passes to the screen and remaining is left out and error is thrown. This results in document not getting posted.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We are not able to check FBVB directly, since it does'nt allow Direct call to this transaction.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Could you please help us in resolving this issue/ let us know if any configuration/ screen variant change is required?
Thanks!
Regards,
M M Jaffer.

Hello Nabheet ,
It is a standard code. We are calling the FM 'PRELIMINIARY_POSTING_POST_ALL' for posting the parked document. The FM calls internally another FM 'POSTING_INTERFACE_DOCUMENT'. This calls the transaction FBVB where we get the above error.
Thanks.

Error while posting parked documents

HI ALL,
After upgrade when we try to post the parked documents ,It calls FM :POSTING_INTERFACE_DOCUMENT"
Inside it a call transaction is done using FBVB which throws error while posting for more than 4 withholding tax types.
Error : Field WITH_DIALG-WT_BASE(5) does not exist in the screen SAPLFWTD 0100.
On running BDC in foreground mode ,Error is happening when the withholding dialog opens and screen seems to be small to input all the tax codes.
But in 4.6 c a bigger screen pops up and no error is thrwon.
We have checked lots of thread and notes ,But nothing seems to be relevant or helpful in our case.
Please check it.
Thanks!

Hi,
Please follow as given below:
1. Use T.Code KO31 and enter order and deactivate the control
2. Then try to post the parked document
3. And use T.Code KO30 and enter the order to activate the control
Some times system will check budget availability which already commited for parked documents.
Hope it will work.
Chandu

Error while posting asset aquisition

Hi to All,
I am getting following error while posting aquisition entry.
"Company code 211 manages parallel currencies in Asset Accounting. For each area that posts automatically online to FI, you have to define one dependent depreciation area that adopts both identical values and depreciation terms from depreciation area 01, and which is assigned to currency type 30 and currency GBP. There is no depreciation area of this type defined for depreciation area 01"
I had made all settings what the error says above but still error persists.
PLEASE ITS VERY URGENT
tanuja

Hi tanuja,
Please check the setting in the T- code OABT.
If it helps pls reward some points.
JS

ErroR while posting J1IH (TR6)

Hello Everybody
I had the following error while posting J1ih.
Balancing field "Profit Center" in line item 001 not filled
In FB50 the following entry was posted with profit center PH1000
PLA On Hold A/C Dr 25000
    to Bank Account Cr 25000
When i am trying T Code J1IH
PLA On Hold A/C Cr 25000
Basic Excise Duty A/C Dr 22000
ECS                            Dr 2000
SECS                          Dr 1000
When i save it the above mentioned error comes.
Please Help
Sunil Kumar

The profit center is defined as a mandatory criteria for document splitting in your config in SPRO- General Ledger accounting (New)->Bus transactions->Doc splitting->Define doc split charact for GL accounting.
So somehow it is not getting dervied for the PLA line item. Check the following:
1. The PLA on hold account is maintained in SPRO in Classify GL accounts for document splitting under the correct category. (menu path same as above upto Doc splitting)
2. The document type for J1IH is maintained with the correct variant in Classify doc types for splitting.
Thanks and regards
Kedar

Error while posting FB60 -

Hi,
I am getting the below error while posting Vendor invoice FB60. Please help me...
Constant ! for Ledger ZWN00 does not contain any value*
Message no. GLT2301
Thanks
Kishore

Hi,
May be the company code assignment to specified special purpose ledger have the real time posting.
VVR

Syntax Error while Posting Material

Similar Messages

Maybe you are looking for