Syntax error with Transformation
Hi all,
I am trying to write a routine in Transformation which reads the navigation attribute of the char Ymaterial from a ODS and fills an internal table which will then be uploaded to a char in the cube.
The Code looks like the one below:
$$ begin of 2nd part global - insert your code only below this line *
DATA: G_MATERIAL TYPE TABLE OF /BIC/PYMATERIAL.
TABLES: /BIC/PYMATERIAL.
$$ begin of routine - insert your code only below this line -
SELECT * INTO TABLE G_MATERIAL
FROM /BIC/PYMATERIAL.
FOR ALL ENTRIES IN SOURCE_PACKAGE
WHERE /BIC/YMATERIAL = SOURCE_PACKAGE-/BIC/YMATERIAL.
SORT G_MATERIAL BY /BIC/YMATERIAL.
I am getting the following error message:
E:The statement "FOR" is not expected. A correct similar statement is
"FORM". statement is "FORM".
In other words, how do I ensure that the value of the attribute which I am reading from the master data table of Ymaterial is the one that is present in the ODS. Can you give the syntax for the same.
Hi rakesh
I think You are right but when I removed the full stop after FROM /BIC/PYMATERIAL, I got the following error Field "SOURCE_PACKAGE" is unknown. It is neither in one of the specified tables nor defined by a "DATA" statement
Thanks
Similar Messages
-
Syntax error in Transformation routine
Hi Folks,
We are In SP 17.
I have migrated standard 0bpartner_attr transfer rules to a transformation with syntax errors.
I have a routine for a gender, Valid From and Valid To its giving the following erorr.
E:Field "TRAN_STRUCTURE-VALID_FROM" is unknown. It is neither in one of
the specified tables nor defined by a "DATA" statement. "DATA"
statement.
the following is the routine code for Gender.
PROGRAM trans_routine.
CLASS routine DEFINITION
CLASS lcl_transform DEFINITION.
PUBLIC SECTION.
Attributs
DATA:
p_check_master_data_exist
TYPE RSODSOCHECKONLY READ-ONLY,
*- Instance for getting request runtime attributs;
Available information: Refer to methods of
interface 'if_rsbk_request_admintab_view'
p_r_request
TYPE REF TO if_rsbk_request_admintab_view READ-ONLY.
PRIVATE SECTION.
TYPE-POOLS: rsd, rstr.
Rule specific types
TYPES:
BEGIN OF tys_SC_1,
Field: XSEXM Male.
XSEXM TYPE C LENGTH 1,
Field: XSEXF Female.
XSEXF TYPE C LENGTH 1,
Field: XSEXU Unknown.
XSEXU TYPE C LENGTH 1,
Field: RECORD.
RECORD TYPE RSARECORD,
END OF tys_SC_1.
TYPES:
BEGIN OF tys_TG_1,
InfoObject: 0GENDER Gender.
GENDER TYPE /BI0/OIGENDER,
END OF tys_TG_1.
$$ begin of global - insert your declaration only below this line -
... "insert your code here
$$ end of global - insert your declaration only before this line -
METHODS
compute_0GENDER
IMPORTING
request type rsrequest
datapackid type rsdatapid
SOURCE_FIELDS type tys_SC_1
EXPORTING
RESULT type tys_TG_1-GENDER
monitor type rstr_ty_t_monitor
RAISING
cx_rsrout_abort
cx_rsrout_skip_record
cx_rsrout_skip_val.
METHODS
invert_0GENDER
IMPORTING
i_th_fields_outbound TYPE rstran_t_field_inv
i_r_selset_outbound TYPE REF TO cl_rsmds_set
i_is_main_selection TYPE rs_bool
i_r_selset_outbound_complete TYPE REF TO cl_rsmds_set
i_r_universe_inbound TYPE REF TO cl_rsmds_universe
CHANGING
c_th_fields_inbound TYPE rstran_t_field_inv
c_r_selset_inbound TYPE REF TO cl_rsmds_set
c_exact TYPE rs_bool.
ENDCLASS. "routine DEFINITION
$$ begin of 2nd part global - insert your code only below this line *
$$ end of rule type
TYPES:
BEGIN OF tys_TG_1_full,
InfoObject: 0BPARTNER Business Partner.
BPARTNER TYPE /BI0/OIBPARTNER,
InfoObject: 0BP_ACTITL1 First Academic Title.
BP_ACTITL1 TYPE /BI0/OIBP_ACTITL1,
InfoObject: 0BP_ACTITL2 Second Academic Title.
BP_ACTITL2 TYPE /BI0/OIBP_ACTITL2,
InfoObject: 0BP_BTHNAME BP: Person's Name at Birth.
BP_BTHNAME TYPE /BI0/OIBP_BTHNAME,
InfoObject: 0BP_CAT Business Partner Category.
BP_CAT TYPE /BI0/OIBP_CAT,
InfoObject: 0BP_CONS Business Partner (Consolidated/Cleansing).
BP_CONS TYPE /BI0/OIBP_CONS,
InfoObject: 0BP_CONTACT BP: Contact Permission.
BP_CONTACT TYPE /BI0/OIBP_CONTACT,
InfoObject: 0BP_EXTERN BP Number in External System.
BP_EXTERN TYPE /BI0/OIBP_EXTERN,
InfoObject: 0BP_FSTNAME BP: Person's First Name.
BP_FSTNAME TYPE /BI0/OIBP_FSTNAME,
InfoObject: 0BP_GROUP Business Partner Grouping.
BP_GROUP TYPE /BI0/OIBP_GROUP,
InfoObject: 0BP_GRPNAM1 BP: Name 1 (Group).
BP_GRPNAM1 TYPE /BI0/OIBP_GRPNAM1,
InfoObject: 0BP_GRPNAM2 BP: Name 2 (Group).
BP_GRPNAM2 TYPE /BI0/OIBP_GRPNAM2,
InfoObject: 0BP_GRPTYPE BP: Group Type.
BP_GRPTYPE TYPE /BI0/OIBP_GRPTYPE,
InfoObject: 0BP_LSTNAME BP: Person's Surname.
BP_LSTNAME TYPE /BI0/OIBP_LSTNAME,
InfoObject: 0BP_MAR_STA BP: Marital Status.
BP_MAR_STA TYPE /BI0/OIBP_MAR_STA,
InfoObject: 0BP_MDLNAME BP: Person's Middle Name or Second First
*Name.
BP_MDLNAME TYPE /BI0/OIBP_MDLNAME,
InfoObject: 0BP_SECNAME BP: Person's Second Surname.
BP_SECNAME TYPE /BI0/OIBP_SECNAME,
InfoObject: 0CHANGEDBY Changed by.
CHANGEDBY TYPE /BI0/OICHANGEDBY,
InfoObject: 0CH_AT Time of Last Change.
CH_AT TYPE /BI0/OICH_AT,
InfoObject: 0CH_ON Last changed on.
CH_ON TYPE /BI0/OICH_ON,
InfoObject: 0CREATEDBY Name of person who created the object.
CREATEDBY TYPE /BI0/OICREATEDBY,
InfoObject: 0CREATEDON Date on which the record was created.
CREATEDON TYPE /BI0/OICREATEDON,
InfoObject: 0CREA_TIME Time Created.
CREA_TIME TYPE /BI0/OICREA_TIME,
InfoObject: 0GENDER Gender.
GENDER TYPE /BI0/OIGENDER,
InfoObject: 0LEGALFORM Legal Status of Organization.
LEGALFORM TYPE /BI0/OILEGALFORM,
InfoObject: 0NAME_ORG1 BP: Organization Name 1.
NAME_ORG1 TYPE /BI0/OINAME_ORG1,
InfoObject: 0NAME_ORG2 BP: Organization Name 2.
NAME_ORG2 TYPE /BI0/OINAME_ORG2,
InfoObject: 0NAME_ORG3 BP: Organization Name 3.
NAME_ORG3 TYPE /BI0/OINAME_ORG3,
InfoObject: 0NAME_ORG4 BP: Organization Name 4.
NAME_ORG4 TYPE /BI0/OINAME_ORG4,
InfoObject: 0NATION Nationality.
NATION TYPE /BI0/OINATION,
InfoObject: 0TITLE_SPPL Name Supplement, for example, Noble Title
TITLE_SPPL TYPE /BI0/OITITLE_SPPL,
InfoObject: 0BP_TYPE Partner:Partner Type.
BP_TYPE TYPE /BI0/OIBP_TYPE,
InfoObject: 0GN_PAR_SSY Source System of a Partner.
GN_PAR_SSY TYPE /BI0/OIGN_PAR_SSY,
InfoObject: 0LOGSYS Source System.
LOGSYS TYPE RSDLOGSYS,
InfoObject: 0RECORDMODE BW Delta Process: Record Mode.
RECORDMODE TYPE RODMUPDMOD,
InfoObject: 0BP_GUID GUID of Business Partner.
BP_GUID TYPE /BI0/OIBP_GUID,
InfoObject: 0BPDATEFROM GP Attributes Valid from.
BPDATEFROM TYPE /BI0/OIBPDATEFROM,
InfoObject: 0BPDATETO GP Attributes Valid to.
BPDATETO TYPE /BI0/OIBPDATETO,
Field: RECORD Data record number.
RECORD TYPE RSARECORD,
END OF tys_TG_1_full.
Additional declaration for transfer rule interface
DATA:
g_t_errorlog TYPE rssm_t_errorlog_int,
RECORD_ALL LIKE SY-TABIX.
global definitions from transfer rules
DATA: gs_cob_pro TYPE rsd_s_cob_pro,
gt_viobj TYPE rsd_t_viobj,
gs_viobj TYPE rsd_s_viobj.
DATA: l_s_errorlog TYPE rssm_s_errorlog_int,
l_text TYPE string.
FORM compute_BPDATEFROM
CHANGING
RESULT TYPE tys_TG_1_full-BPDATEFROM
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
INCLUDE rs_bct_bupa_form_valid_from.
ENDFORM. "BPDATEFROM
FORM compute_BPDATETO
CHANGING
RESULT TYPE tys_TG_1_full-BPDATETO
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
INCLUDE rs_bct_bupa_form_valid_to.
ENDFORM. "BPDATETO
FORM compute_GENDER
CHANGING
RESULT TYPE tys_TG_1_full-GENDER
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
INCLUDE rs_bct_bupa_form_gender.
ENDFORM. "GENDER
FORM compute_GN_PAR_SSY
CHANGING
RESULT TYPE tys_TG_1_full-GN_PAR_SSY
RETURNCODE LIKE sy-subrc
ABORT LIKE sy-subrc
RAISING
cx_sy_arithmetic_error
cx_sy_conversion_error.
INCLUDE rs_bct_bupa_form_gn_par_ssy.
ENDFORM. "GN_PAR_SSY
$$ end of 2nd part global - insert your code only before this line *
CLASS routine IMPLEMENTATION
CLASS lcl_transform IMPLEMENTATION.
METHOD compute_0GENDER.
IMPORTING
request type rsrequest
datapackid type rsdatapid
SOURCE_FIELDS-XSEXM TYPE C LENGTH 000001
SOURCE_FIELDS-XSEXF TYPE C LENGTH 000001
SOURCE_FIELDS-XSEXU TYPE C LENGTH 000001
EXPORTING
RESULT type tys_TG_1-GENDER
DATA:
MONITOR_REC TYPE rsmonitor.
*$*$ begin of routine - insert your code only below this line *-*
Data:
l_s_error_log type rssm_s_errorlog_int,
l_subrc type sy-tabix,
l_abort type sy-tabix,
ls_monitor TYPE rsmonitor,
ls_monitor_recno TYPE rsmonitors.
REFRESH:
monitor,
monitor_recno.
Migrated transfer rule call
Perform compute_GENDER
CHANGING
RESULT
l_subrc
l_abort.
*-- Convert Messages in Transformation format
LOOP AT G_T_ERRORLOG INTO l_s_error_log.
move-CORRESPONDING l_s_error_log to MONITOR_REC.
append monitor_rec to MONITOR.
ENDLOOP.
IF l_subrc <> 0.
RAISE EXCEPTION TYPE cx_rsrout_skip_val.
ENDIF.
IF l_abort <> 0.
RAISE EXCEPTION TYPE CX_RSROUT_ABORT.
ENDIF.
$$ end of routine - insert your code only before this line -
ENDMETHOD. "compute_0GENDER
Method invert_0GENDER
This subroutine needs to be implemented only for direct access
(for better performance) and for the Report/Report Interface
(drill through).
The inverse routine should transform a projection and
a selection for the target to a projection and a selection
for the source, respectively.
If the implementation remains empty all fields are filled and
all values are selected.
METHOD invert_0GENDER.
$$ begin of inverse routine - insert your code only below this line-
... "insert your code here
$$ end of inverse routine - insert your code only before this line -
ENDMETHOD. "invert_0GENDER
ENDCLASS. "routine IMPLEMENTATION
let me know how to correct the above code.
thanksHi,
the field tran_structure is no more available. The name changed to source_fields. Additionally there is no datapak available. It is now source_fields_table. You might need to use field symbols to access the fields.
regards
Siggi -
Syntax Error with EXPORT statement in ECC 6
Hi All,
I have one issue with EXPORT statement syntax.
I have declared data like below:
DATA: BEGIN OF mem_id,
mandt LIKE sy-mandt,
uname LIKE sy-uname,
modno LIKE sy-modno,
END OF mem_id.
export the memory id
EXPORT E_VBKOK XANZPK TEXTTAB XBOLNR TO MEMORY ID MEM_ID.
When I am checking the syntax error i am getting like "MEM_ID" must be a character-type field (data type C, N, D or T). by "INTERFACE". by "INTERFACE". "INTERFACE". by "INTERFACE". by "INTERFACE".
I know this statement would be like IMPORT ITAB TO JTAB FROM MEMORY ID 'table'. So I have written like below
EXPORT E_VBKOK XANZPK TEXTTAB XBOLNR TO MEMORY ID 'MEM_ID'. But still it is throwing an error.
Can you please let me know how can I resolve this?
Regards,
Jyothi CH.Hi Jyothi,
data: l_var type string.
concatenate '6' '8' into l_var separated by space.
export l_var to memory id 'BB'.
Here we have to declare the type(structure) for l_var not for BB
and in another program
data:l_var type string.
import l_var from memory id 'BB'.
write : l_var. -
Syntax Error with JSON.Parse method to parse SharePoint List Items
Hi All,
I want to get SharePoint List data and bind that retrived data to the JQuery Grid Control.
For this I used SPServices to get the SharePoint List data in SOAP Envelope. Now I need to parse the soap envelope and store the retrieved items in array to pass it to the Grid Control.
While using the JSON.Parse(resporseText) method, Iam consistenly getting an Syntax Error!
Could anyone help me with this ?
Please find the SOAP Envelope I received from SP List as below:
"<?xml version="1.0" encoding="utf-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><soap:Body><GetListItemsResponse xmlns="http://schemas.microsoft.com/sharepoint/soap/"><GetListItemsResult><listitems xmlns:s='uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882'
xmlns:dt='uuid:C2F41010-65B3-11d1-A29F-00AA00C14882'
xmlns:rs='urn:schemas-microsoft-com:rowset'
xmlns:z='#RowsetSchema'>
<rs:data ItemCount="2">
<z:row ows_OBNumber='112211.000000000' ows_Project_x0020_Name='Project 1' ows_MetaInfo='11;#' ows__ModerationStatus='0' ows__Level='1' ows_Title='Project 1' ows_ID='11' ows_UniqueId='11;#{FBBCBCF9-666D-42F9-92D7-67188C51BC9B}' ows_owshiddenversion='1' ows_FSObjType='11;#0' ows_Created='2015-01-12 10:25:06' ows_PermMask='0x7fffffffffffffff' ows_Modified='2015-01-12 10:25:06' ows_FileRef='11;#sites/Lists/Projects/11_.000' />
<z:row ows_OBNumber='1122343.00000000' ows_Project_x0020_Name='Project 2 ' ows_MetaInfo='12;#' ows__ModerationStatus='0' ows__Level='1' ows_Title='Project 2' ows_ID='12' ows_UniqueId='12;#{0D772B76-68E4-4769-B6FF-6A269F9C7ABD}' ows_owshiddenversion='1' ows_FSObjType='12;#0' ows_Created='2015-01-12 10:33:48' ows_PermMask='0x7fffffffffffffff' ows_Modified='2015-01-12 10:33:48' ows_FileRef='12;#sites/Lists/Projects/12_.000' />
</rs:data>
</listitems></GetListItemsResult></GetListItemsResponse></soap:Body></soap:Envelope>"
Any help on this will be greatly appreciated.
Thanks In Advance.!Hi,
According to your description, there is an issue when parsing result from the data retrieved using SPServices.
By default, SPServices returns data as XML format, however, the JSON.parse() method “Throws a SyntaxError exception if the string to parse is not valid JSON”:
https://developer.mozilla.org/en/docs/Web/JavaScript/Reference/Global_Objects/JSON/parse
To extract the data needed from the response, you can either take the demo below for as a reference:
http://spservices.codeplex.com/wikipage?title=GetListItems
Or use the jQuery.parseXML() function:
http://api.jquery.com/jquery.parsexml/
Best regards
Patrick Liang
TechNet Community Support -
Syntax Error with Table Parameter (type: ANY) when Creating Function Module
Hello experts,
I want to create a function module with a table parameter and table type is ANY. But when I check (Ctrl+F7) this function module, syntax error occurs - "In this statement, the internal table "MSG_TABLE_ITEM" must have the type "STANDARD TABLE"."
Could anyone tell me what the wrong is? And how can I fix it?
Thanks,
ShelwinHi,
For table parameters, you can only pass
MSG_TABLE_ITM TYPE STANDARD TABLE
or
MSG_TABLE_ITM ( don't fill other columns TYPING ASSOCIATED TYPE ).
For reference check FM 'GUI_UPLOAD' - Table parameters
Regards,
DPM -
MySQL syntax error with TestStand 4.0 database logging
I had been using MS Access database to log results which worked fine but the access database is too limited. Switched to MySql. Database works fine and I can query it from Visual C++ and was able to create all my result tables fine from TestStand.
I get a syntax error when actually trying to log results and it has to do with either a missing quote or and extra quote, I can't quite tell. I thought I saw a post on this somewhere but can't find it now. Here is the complaint from TestStand:
An error occurred calling 'LogOneResult' in 'ITSDBLog' of 'zNI TestStand Database Logging'
An error occurred executing a statement.
Statement: UUT_RESULT.
[MySQL][ODBC 3.51 Driver][mysqld-5.0.45-community-nt]You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'DEFAULT VALUES' at line 1
Description: [MySQL][ODBC 3.51 Driver][mysqld-5.0.45-community-nt]You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'DEFAULT VALUES' at line 1
Number: -2147467259
NativeError: 1064
SQLState: 37000
Reported by: Microsoft OLE DB Provider for ODBC Drivers
Description: Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.
Number: -2147217887
NativeError: 0
SQLState: 37000
Reported by: Microsoft OLE DB Provider for ODBC Drivers
Source: TSDBLog
And here is all that appears in the MySql logfile:
INSERT INTO UUT_RESULT DEFAULT VALUES
070914
You can't see it here but the string is truncated after the word VALUES. The next line starts with the odd number.
Any ideas?
Thanks,
Bill Peters
BAE SYSTEMSSure. There were two bugs in the ini file that contains the default TS schemas (I think it was Default_Database_Options.ini or like that...).
Anyway the table description for STEP_NUMERICLIMIT had for it's command line INSERT INTO MEAS_NUMERICLIMIT. I guess TestStand looked at that and said hmm I better create that table too. Then later down the page when you try to create MEAS_NUMERICLIMIT it says the table already exists even though it is empty. The generate SQL button builds a bad file and then the database viewer creates a bad database. I would have to go into MySql and drop the database. I had to save the schema under a custom name, edit it read it back in, generate a new SQL file, but then it would still fail validation because the ini files don't get updated until you exit TestStand. So basically I did this process 3 times before I got it right.
It's wasn't a big deal but it's amazing how a little thing can cause a lot of work.
The second bug, I'm not certain was initially in the file or somehow got set on the fly. There was a random int statement at the very end of the SQL table description for UUT_RESULT. It was also in the schema INI file. Since the int had no name and occurred in a odd place, it created a syntax error in MySql. Same fix as above.
But like I said it's working great now. I like this approach because I serve it to the net with Apache and parse the database with simple PHP scripts.
Thanks,
Bill Peters
BAE SYSTEMS -
Syntax errors with ES freeze/hang FM
Hi,
I keep bumping into situations where a small syntax error causes FM to freeze, like there is a modal dialog open except there is no dialog. For example:
doc = app.ActiveDoc();
...this is wrong because of the parenthesis, but rather than throwing any errors, FM just freezes and I can't get it unfrozen, except to kill it with the Task Manager. Is there a way to prevent this freeze or at least thaw it out? It's becoming tiresome to restart FM and reset locks, etc. with every little typo.
Thanks,
RussHi Russ,
I think this won't help you, but I can reproduce this with app.ActiveDoc() and app.ActiveBook().
With other properties I get a correct runtime error "app.AutoBackup() is not a function".
So generally it works as expected, but not in these two cases.
I think this is a problem of the script engine in these two cases. Perhaps there's an invisible (private) method defined, which is used internally, I don't know.
Bye
Markus -
Illegal register: "icc" : syntax error with Sun C 5.8 compiler
I wanted to compile my C file with compiler option "cc -c -Xc -mt -fast -xarch=amd64" on Solaris 10 amd64 machine but it failed with following error -
Assembler: abc.c
"/tmp/GAAOBain6", line 819 : Illegal register: "icc"
"/tmp/GAAOBain6", line 819 : Syntax error
Near line: " orq %icc,%r8 ;/ line : 210"
"/tmp/GAAOBain6", line 852 : Illegal register: "icc"
"/tmp/GAAOBain6", line 852 : Syntax error
Near line: " movzwq %icc,%r9 ;/ line : 215"
cc: ube failed for abc.c
*** Error code 2
I am using following sun C compiler -
/SS11/SUNWspro/bin/cc -V
cc: Sun C 5.8 Patch 121016-02 2006/03/31
Do anybody has idea about this issue?
Thanks
SguptaThanks Boris for your help.
My abc.c file is following -
struct struct_1 {
unsigned type:8;
unsigned level:5;
unsigned seen:1;
unsigned pad:2;
unsigned length:16;
void sample (unsigned char type)
struct struct_1 *q;
/*** Allocate and assign pBody here **/
q->type = type;
q->length = type;
==========================================
compiling this file with following option gives the error in Sol-10 amd64 -
/SS11/SUNWspro/bin/cc -c -Xc -mt -fast -xarch=amd64 abc.c
But compiling without "-fast" options work fine.
Thanks
Sgupta -
Syntax Error with creating object
Hi,
I am getting the following syntax error in the code below:
non-staic variable this cannot be referenced from a static context
job[ ] thread = new job(20);
non-staic variable this cannot be referenced from a static context
thread[index] = new job(index);
public static void main (String[ ] args) {
job[ ] thread = new job(20);
for(int index=0; index < 20; index++) {
input1[index]=index;
input2[index]=index*2;
for (int index=0; index < 20; index++) {
thread[index] = new job(index);
thread[index].start();
Zulfi.Declare the nested class 'job' as static. Like "static class job" etc.
-
Syntax Error with SWF files on SH903i
I'm using Flash Pro 8 and thought I'd try out creating a very
simple SWF to test on the phone. Using the basic templates for
Flash 1.0/1 and Actionscript 1... I made a simple bouncing circle,
but I keep getting a "syntax error" when I try to download it into
my phone via the phone web browser. Is there something I'm missing?
It seems very straight-forward, but is there something I'm
missing?I figured it out. I had to access the file directly.
Oddly. -
Firefox generates a javascript syntax error with ![CDATA[
I have an app written in HTML5, SVG and javascript that ran until today. I uploaded 3.6.10, and now javascript reports a syntax error for the <![CDATA[ tag. Even when I remove the tag, the SVG will not run. I haven't made ANY changes to the app, just updated Firefox. What changed to break this?
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
A good place to ask questions and advice about web development is at the MozillaZine Web Development/Standards Evangelism forum.
The helpers at that forum are more knowledgeable about web development issues.
You need to register at the MozillaZine forum site in order to post at that forum.
See http://forums.mozillazine.org/viewforum.php?f=25
You need to post a link to the website or post relevant parts of the code. -
Error with transform activity - failed to save XSL Map
I am trying to create a bpel process that gets files via ftp which consists and a set of data records. The plan is for the data to be inserted into a db staging table. Along the way I need to execute a transformation on the data to get it into a form that the staging table can use. Thus I was trying to execute a transform activity which would take the ftp source data which is a xml document with multiple records and then port it into the collection for insertion into the db table. However I find that when I try to save the transform after connecting the recs element to the for-each for the db elements I get a message from jdeveloper 10.1.3.4 "Failed to save XSL Map".
How to I transport the data and overcome this problem?
Thanks,
SteveHi,
I had faced similar kind of problem earlier. It was not a problem with transformation; it was problem with JDeveloper sessions. Before creating the XSL please check if you can able to connect the remote system from JDeveloper. -
@prompt syntax error with Optional
Hi Everyone,
My first post here, hope you guys can help me out. I have some predeifned conditions on a UDT universe which does not parse but works fine. However, In IDT i am making the same but unable. As I have seen so far with the .UNX universe any predefined conditions which does not parse on IDT does not work on the report as well unlike UNV universe. So here is my issue:
This does not parse on .UNV but works fine on the report:
convert(varchar, Vw_Ln_Umb.rim_no) = @Prompt('Customer No:','A','Limit Details\Customer No.',Mono,Free,Not_Persistent,{'ALL',}) OR 'ALL' =
@variable('Customer No:')
I have corrected the mistake of the 7th parameter which is the default value as follows:
convert(varchar, Vw_Ln_Umb.rim_no) = @Prompt('Customer No:','A','Limit Details\Customer No.',Mono,Free,Not_Persistent,{'ALL'})
OR 'ALL' = @variable('Customer No:')
and i get the following error : Incorrect syntax near the keyword 'OR'.
When I remove the "OR 'ALL' = @variable('Customer No:')"
I get the error: Incorrect syntax near ')'.
So i have to correct the filter condition as
convert(varchar, Vw_Ln_Umb.rim_no) = @Prompt('Customer No:','A','Limit Details\Customer No.',Mono,Free,Not_Persistent)
but this does not allow me to have ALL as the default value which inturn acts as an optional prompt at report level.
Kindly help me either fix this or create pre-defined conditions with optional prompts.
MaheeHi mahee,
Apply this filter condition
if you want to select single value in report use "Mono"
Vw_Ln_Umb.rim_no = @Prompt('Customer No:','N','Limit Details\Customer No.',Mono,Free,Not_Persistent)
if you want to select multiple value in report use "Multi"
Vw_Ln_Umb.rim_no IN @Prompt('Customer No:','N','Limit Details\Customer No.',Multi,Free,Not_Persistent)
Remove extra comma in your filter condition.
Regards
Mustafa -
Syntax error with CL_ABAP_CHAR_UTILITIES
Hi,
I am facing an error during syntax check of the include program ZXMBCU01.
My code is:
class cl_abap_char_utilities definition load.
CONSTANTS: c_lf TYPE C VALUE CL_ABAP_CHAR_UTILITIES =>CR_LF.
CONSTANTS: c_cr TYPE c value cl_abap_char_utilities=>newline.
CONSTANTS: c_tab TYPE C VALUE CL_ABAP_CHAR_UTILITIES =>HORIZONTAL_TAB.
whats wrong with it?
thanks!
ChikaFound that CR_LF is two characters, right?
Sorry for double...I just hit post once. -
Undue Syntax error in transformation routine
Hi,
A routine is reported to be incorrect (error RSTRAN 523) during the check of the transformation. However, a check on the source code in the editor returns no errors.
I've implemented the oss note 980548, but I still face the problem.
Do you have any idea of how to solve this issue ?
Thanks in advance !
DieuHi Dieu,
I had a problem related to a Transfer Roule for the selection of the same filed in Start Routine and single filed routine.
Check if you are obtaining two InfoObjects from the same field and check the corresponding routines.
Ciao.
Riccardo.
Maybe you are looking for
-
How do I stop the "install Flash..." pop-up? It is annoying!
I use Windows 7 and Firefox 23, and both a updated often. I uninstalled ALL Adobe products to get rid of their spying tools - long-tern cookies that could not be blocked. Shortly after I used Adobe's tools to eliminate local storage, I would go back
-
Oracle.jdbc.driver.OracleDriver not Found
I compiled and ran my code fine using JDevelopper. When i try to run it at the command prompt I get the following error: java.lang.classNotFoundException: oracle.jdbc.driver.OracleDriverWhat must I do for it to work in the command prompt? Thanks in a
-
Good receipt entry not possible
hi sap guru, while entering good receipt, i am getting error of ACCOUNT DETERMINATION FOR ENTRY INT GBB___BSA 3000 not possible please throw some light thank in advance
-
Forgot to sync 3G before connecting iphone 4
Hi, I just messed up. I had just brought home my new iPhone 4 and without thinking about what I was doing I connected it to my iMac and synced it (at this point I had pulled the new SIM card I got apart so that it would fit in the new phone, no usabl
-
Lightroom 2 Manual in PDF format
Where can one find the LR 2 User Manual in PDF format? Y=The help screen mentions it is available on line, but I have looked everywhere I could think of and nada. Any help would be greatly appreciated, TIA, John