Sys 10.4.2

we are having trouble with Macromedia Flash MX 2005 with the 10.4.2 We used the system on 10.3 and it worked fine has anyone used this product on 10.4? I was wondering if we had to install 9.0 sys to have it work correctly, and if so does 9.0 have to be install first? I asked this question to the apple people but was told that he didn't know anything about 9.0 system.

I presume you mean Flash MX 2004. We've been using Flash 2004 with 10.4.2 and have had no problems thus far, though it's not been pushed extensively yet. And Mac OS 9 is not required at all.
You may want to take the issue up in the Mac OS X 10.4 forum or on Macromedia's own forums. When you do, please be sure to describe the exact problems you're having so that anyone reading knows what the problem is.

Similar Messages

Instead of using the make file can you build nirlpk.sys using MS WDK 8.0 on VS2012?

After downloading the NI nimhddk_windowsWDM-2 and -1
Instead of using the make file I built nirlpk.sys using MS WDK 8.0 on VS2012
I copied the source files out of the dir /nirlpk to the MS template for WDM drivers
It built after turning warnings as errors off.
After uninstalling the NI_DMX driver I tried to install the RLP driver that consisted of nirlp.inf and nirlpk.sys
I got this message:
Windows found driver software for your device but encounted and error while attempting to install it.
PCI-6602 RLP WDM
Driver is not intended for this platform
Is the nirlp.inf file correct for loading on Windows 7 64 bit?
Any ideas?

I have now altered the example along lines
suggested by ghaneman*, who pointed out that
a trusted application did not need to use the
FileOpenService/FileContents just to get an
InputStream.
* Mentioned on 'File associations / sandboxed app.'
http://forum.java.sun.com/thread.jspa?threadID=785224
The altered code is..
/** Load a file into the editing area.
@param path A string representing the path to the desired file. */
public void loadFile(String path) {
    // first try as if this were a trusted application..
    if (!path.equals(".")) {
        try {
            FileInputStream inputStream = new
                FileInputStream(path);
            loadFile(inputStream);
        } catch (Exception e) {
            // we do not have trust, use the FileOpenService
            loadFileByFileService(path);
    } else {
        // we only have a directory, use the FileOpenService
        loadFileByFileService(path);
public void loadFileByFileService(String path) {
    try {
        if (fileOpenService==null) {
            fileOpenService = (FileOpenService)ServiceManager.
                lookup("javax.jnlp.FileOpenService");
        fileContents = fileOpenService.openFileDialog(path, xtns);
        // the user may have cancelled the action..
        if (fileContents!=null) {
            loadFile( fileContents.getInputStream() );
    } catch(UnavailableServiceException use) {
        use.printStackTrace();
    } catch(IOException ioe) {
        ioe.printStackTrace();
}If the user launches the trusted version, and
selects 'always trust' for the (self signed)
certificate, the end user can thereafter double
click a file and see it appear in the application's
editing area with no further user interaction.

"Couldn't load library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll'"

Hi!
As you can see from here :
http://www.fabiocavallo.it/sap/maxdb.jpg
MaxDB seems to work fine, but after starting application server i have got an error :
SAPGUI Logon Error Message:
http://www.fabiocavallo.it/sap/sapguilog.jpg
...here comes dev_w0 :
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, MJ
B
B Thu May 22 19:58:50 2008
B create_con (con_name=R/3)
B Loading DB library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll) Error 126 http://dlnt.c 237
M Error 126 = "Impossibile trovare il modulo specificato."
B *** ERROR => Couldn't load library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll'
http://dbcon.c 4726
M sysno 00
M sid NSP
M systemid 560 (PC with Windows NT)
M relno 7000
M patchlevel 0
M patchno 95
M intno 20050900
M make: multithreaded, ASCII, optimized
M pid 3376
M
M kernel runs with dp version 224(ext=109) (@(#) DPLIB-INT-VERSION-224)
M length of sys_adm_ext is 360 bytes
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 0 3376) http://dpxxdisp.c 1301
I MtxInit: 30000 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: VMC (JAVA VM in WP) is not active
M
M Thu May 22 19:58:51 2008
M DpShMCreate: sizeof(wp_adm) 6328 (904)
M DpShMCreate: sizeof(tm_adm) 3605136 (17936)
M DpShMCreate: sizeof(wp_ca_adm) 1200 (60)
M DpShMCreate: sizeof(appc_ca_adm) 1200 (60)
M DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528040/528048
M DpShMCreate: sizeof(comm_adm) 528048 (1048)
M DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
M DpShMCreate: sizeof(slock_adm) 0 (96)
M DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
M DpShMCreate: sizeof(file_adm) 0 (72)
M DpShMCreate: sizeof(vmc_adm) 0 (1280)
M DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
M DpShMCreate: sizeof(gw_adm) 48
M DpShMCreate: SHM_DP_ADM_KEY (addr: 06420040, size: 4205552)
M DpShMCreate: allocated sys_adm at 06420040
M DpShMCreate: allocated wp_adm at 06421A28
M DpShMCreate: allocated tm_adm_list at 064232E0
M DpShMCreate: allocated tm_adm at 06423310
M DpShMCreate: allocated wp_ca_adm at 067935A0
M DpShMCreate: allocated appc_ca_adm at 06793A50
M DpShMCreate: allocated comm_adm at 06793F00
M DpShMCreate: system runs without slock table
M DpShMCreate: system runs without file table
M DpShMCreate: allocated vmc_adm_list at 06814DB0
M DpShMCreate: allocated gw_adm at 06814DF0
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 06814E20
M DpShMCreate: allocated wall_adm at 06814E28
X EmInit: MmSetImplementation( 2 ).
X MM global diagnostic options set: 0
X <ES> client 0 initializing ....
X Using implementation view
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M ThInit: running on host PCFABIO
M
M Thu May 22 19:58:52 2008
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll) Error 126 http://dlnt.c 237
M Error 126 = "Impossibile trovare il modulo specificato."
B *** ERROR => Couldn't load library 'C:\SAP\NSP\SYS\exe\run\dbsdbslib.dll'
http://dbcon.c 4726
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) http://thxxhead.c 1426
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) http://thxxhead.c 10240
M
M Info for wp 0
M
M stat = WP_RUN
M waiting_for = NO_WAITING
M reqtype = DP_RQ_DIAWP
M act_reqtype = NO_REQTYPE
M rq_info = 0
M tid = -1
M mode = 255
M len = -1
M rq_id = 65535
M rq_source =
M last_tid = 0
M last_mode = 0
M semaphore = 0
M act_cs_count = 0
M csTrack = 0
M csTrackRwExcl = 0
M csTrackRwShrd = 0
M control_flag = 0
M int_checked_resource(RFC) = 0
M ext_checked_resource(RFC) = 0
M int_checked_resource(HTTP) = 0
M ext_checked_resource(HTTP) = 0
M report = > <
M action = 0
M tab_name = > <
M vm = no VM
M
M *****************************************************************************
M *
M * LOCATION SAP-Server PCFABIO_NSP_00 on host PCFABIO (wp 0)
M * ERROR ThInit: db_connect
M *
M * TIME Thu May 22 19:58:52 2008
M * RELEASE 700
M * COMPONENT Taskhandler
M * VERSION 1
M * RC 13
M * MODULE thxxhead.c
M * LINE 10439
M * COUNTER 1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm http://thxxrun1.c 720
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed http://thxxtool3.c 260
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 3376) http://dpnttool.c 327
File dbsdbslib.dll' is 'there' (in 'C:\SAP\NSP\SYS\exe\run\), maybe i have to set environment variable in windows for SAP.
Could you help me, please ?
I don't know how to set these variables.......
Many thanks.
Regards.
Fabio

Hello Fabio,
-> You wrote:
"File dbsdbslib.dll' is 'there' (in 'C:\SAP\NSP\SYS\exe\run\)"
=> Please check the version of this file.
< Go to file properties ->Version && update with 'file version', Platform,
   Product Name, Product Version information >
-> What version of the SAP system did you install?
     "I suppose that i can download this patch from Sap MaketPlace, but i can't register there, because i have no
      Customer or   Installation Number! (i can't Logon in SAP....) "
     From were did you get the SAP software installation or CD?
-> Could you upgrade the database client software on the application server to the version 7.7.04.08 or higher.
    You pointed "As you can see from here : http://www.fabiocavallo.it/sap/maxdb.jpg u2026 "
   => If the database and application were running on the same server, you installed the database
Software version 7.6.02.17. Please run 'sdbregview -l' to review the list of all installed packages
on the server.
-> "MaxDB seems to work fine, but after starting application server i have got an error"
     Was the system working fine before? What was changed?
     Or you was not able to start the application server after installation. ?
Thank you and best regards, Natalia Khlopina

Upgrade oracle 9.2.0.8.0 to 10.2.03 ORA-06512: at "SYS.VERSION_SCRIPT", lin

Upgrade oracle 9.2.0.8.0 to 10.2.03. while runing catupgrd.sql script. i am geting error.
SELECT version_script AS file_name FROM DUAL
ERROR at line 1:
ORA-20000: Upgrade not supported from version
ORA-06512: at "SYS.VERSION_SCRIPT", line 52
Please help me.
AT

Strange. Metalink doc 316889.1 says you should be able to upgrade following versions directly to 10.2.0.3.0
8.1.7.4 -> 10.2.X.X.X
9.0.1.4 or 9.0.1.5 -> 10.2.X.X.X
9.2.0.4 or higher -> 10.2.X.X.X
10.1.0.2 or higher -> 10.2.X.X.X
Not too sure but may be you need to contact Oracle support.

COMPUTE INDEX vs. SYS.DBMS_STATS.GATHER_INDEX_STATS

Hi,
I've got an Oracle 9 database.
I am creating an index. I had created this index using the following syntax:
CREATE INDEX index1. . . . . . COMPUTE STATISTICS;
One of my colleagues tells me that I should scrap 'COMPUTE STATISTICS' and instead make this a two step process:
(1) CREATE INDEX index1. . . . .
(2) SYS.DBMS_STATS.GATHER_INDEX_STATS
OwnName => 'schema'
,IndName => 'index_name'
,Estimate_Percent => 10
,Degree => 4
,No_Invalidate => FALSE);
Is there any advantage to using SYS.DBMS_STATS.GATHER_INDEX_STATS instead of 'COMPUTE STATISTICS'?
Thanks,
Tom

9i references<br>
In particular...<br>
Deprecated at 10<br>

How to protect the SYS ID?

Hi All,
I have an application that allows a central application administrator - this ID in the application matches to an Oracle ID with no objects, but many rights. Since they need to reset regular user passwords this user gets granted the "ALTER USER" role. Doing some experimentation I found that this user has the rights to change the SYS password now! (and any other SYSDBA user). The documentation does confirm this:
*Security administrators are typically the only users that have this system privilege, as it allows a modification of any user security domain.*
Now, my solution is to remove the ALTER USER privilege and leave the password resets to the DBA (i.e. me), but I was wondering if anyone knows of a solution that will still allow a user to change other database user passwords, but exclude the SYS password?
FYI, this is running 11.1.0.7 on Windows 64-bit. Any ideas would be greatly appreciated.
Thanks,
Martin

Normally, you'd use a stored procedure for this.
A highly privileged user (i.e. a DBA account) would own a procedure that resets user passwords. That procedure would do a bit of validation that the password being reset is a regular application user account, not a DBA. And the procedure would probably do a bit of logging so you can track who reset the password. The highly privileged user would then grant the application administrator EXECUTE access on this stored procedure. The application admin would be able to reset normal user passwords by calling the procedure but would not be able to reset the password for privileged users.
Justin

Jobs running under sys user name

Oracle 10.2.0.3 Enterprise
Win2k3
Just upgraded to 10.2.0.3 ee from 10.1.0.4 standard.
The jobs were entered via em and given the proper owner.
em was logged in as sys. All jobs are running as user name sys.
Can the user name be changed to the owner or do I have to drop and rebuild the jobs?
Thanks for any help
Bob

Hi,
For jobs there are two users, the job_owner and the job_creator.
The job_owner is the schema the job is created in. The job runs as the job owner and with the privileges of the job owner.
The job_creator is the user that creates the job (even if he creates it in another schema). When a job runs it sets its logged-in-user to be the job creator, so any actions will be audited as having been done by the job creator.
Neither the job_owner nor the job_creator can be modified after the job has been created.
But you may be able to use the copy_job command or the create_like EM button to save you some trouble.
Hope this helps,
Ravi.

Vista crcdisk.sys error on Tecra A4

When the beta version of Vista came out several people were having installation problems where start-up would stop on first reboot at 'crcdisk'sys'
I've been following the MS forums as well as here but never found a solution.
Has anyone successfully installed Vista Beta on a Tecra A4 yet? If so, what's the secret?
Any help appreciated
Salamat

Thanks for replying and suggesting the link. I have been keeping my eyes on the MS forums since first installing
Beta2 but not yet found the cause or solution in there. Most of the posts go back to June and July shortly after Beta 2 came out and since it went all quiet I assume people resigned themselves to not solving the problem. With the release of 5536 maybe the issue will raise itself there again.
Thanks
Salamat
> Hi,
>
> Maybe found you a answer for your Question with Vista
> in the Vista Forum.
> Please check this.
> http://forums.microsoft.com/TechNet/Search/Search.aspx
> ?words=Installation+from+Vista&localechoice=9&Site ID=1
> 7&searchscope=allforums
>
> By

I keep getting blue screen and error message to remove this file from system. spooldr.sys

HP Officejet 4500 Wireless All-in-One Printer - G510n    w/operating system     Windows XP Professional
I installed the printer in February and the disk did not finalize the setup process. I went online and
down loaded the drivers and software that was offered from the HP website.
The printer works, but as the months have gone along, I keep getting updates for the printer and
the system needs to reboot and it does automatically.
Now I am getting a blue screen with a critical dump error message. HP error reporting keeps sending
the same message back to restore to earlier date before the updates. That worked for awhile. Now
HP Error system says that malware has corrupted and needs to remove system file     spooldr.sys
Is this in your driver software. Spooldr is the system that caches pages of data for printing in chronological
order....
Can I uninstall my software and drivers and change to the plain & simple, print and scan to prevent the
spool driver from loading to my system?

Thank you for your input. But, It is amazing that you can tell me that I was infected with rootkit.
Without information as to how to fix, your information is after the fact and useless.
I used the Safety Scanner provided to me by HP.  A full scan didn't detect any Malware in any files on my system. But the last screen dump provided the information that   spooldr.sys was corrupted and needed
to be removed.
Coming into HP Form, I did read on the HP website that my system Windows XP Professional was not listed
and noted that the software may have not been just what I needed. This was the reason for the question
about uninstalling and reinstalling less of the program. I really don't need my printer to print backward and
that is all I see that it is doing that other printers don't.
Besides, Kudos goes to the person from HP who sent the email, suggesting I used the HP Update software and drives recommended for my computer system. Computer, printer is working, back to normal and hasn't taken a dump since, I uploaded software and drives for Windows XP Professional.

Storport.sys BSOD on Windows Server 2012 R2

I recently purchased a Server that houses 45 4TB drives to use as my backup to disk solution. I installed Windows Server 2012 R2 Standard so that I could take advantage of Microsoft's Storage Spaces. I have configured the Storage Pool
with Dual Parity with 3 hot spares. I have also updated every thing to the most current firmware, drivers and Windows Updates that I could find but I am still getting the BSOD. I am using Symantec Backup Exec 2010 R3 to backup my file server to this server.
It will run for anywhere between 12 to 31 hours transferring 1.5 to 3TB and then my server will Blue Screen and every time it Blue Screens it says it is caused by the storport.sys Driver. I've found articles talking about the storport.sys driver causing nonpaged
pool leaks but that was for Windows Server 2008 R2, I can't find anything for Windows Server 2012 R2. If you need additional information just let me know and I will provide it. Any help you can give would be greatly appreciated.

Hi,
This article provided the limitation of Storage Pool in Windows Server 2012 R2:
https://social.technet.microsoft.com/wiki/contents/articles/11382.storage-spaces-frequently-asked-questions-faq.aspx#What_are_the_recommended_configuration_limits
Yor current situation is still in supported configuration.
Also there is no hotfix for Windows Server 2012 R2 regarding storport.sys yet. Which means your current issue is not a known issue.
For further troubleshooting purpose you may need to collect dump files for analysis. However it will take a long time to do the troubleshooting process on forum. Thus it is recommended to submit a ticket to Microsoft online support for a professional troubleshooting.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
If you have any feedback on our support, please send to [email protected]

Dc5850 cpu fan speeds to top speed sys then shutdown

I have a Hewlett-Packard HP Compaq dc5850 Micro tower PC, now running windows 7 pro 64-bit. That was new in late 2008. Originally it came with vista 32-bit downgrade able to XP pro 32 bit, running on 2G RAM, and 160G C drive with a 2.30 gigahertz AMD Phenom 8600B Triple-Core processor. It also has ATI 3100 integrated graphics as well as integrated NIC at 1G and integrated High def audio. In the first few months I had the system, I upgraded memory by 4G and total Disc space by 500G by adding a D drive; then upgraded to windows 7 pro 64-bit.
Overall, I have had a good experience with the PC but it has had problems while in its 3-year warranty. I did need to replace the C drive and later it original RAM devices. Yes HP did these replacements and swaps, under warranty; that meant I had 6G memory for a long time before the HP 2Gig failed out of warranty, leaving me with 4Gig now. Yes I have always had the Unit on an UPS; I even replaced the old UPS with a more powerful unit in late 2009 or early 2010 when the old UPS showed signs of failure. Now instead of serial based UPS connection it is USB.
Over the last few months I have been getting blue-screen errors of all sorts. Ranging from video related errors, Memory faults, Disc read/write failures and processor flag errors too. After numerous repair disc runs or re-install of windows, the disc read write errors wore corrected by the HP drive sanitation utility disc repair/wipe after failing the extended test. The non video ram was tested by a bootable CD of memtest86 v4 running extended test as well as MS memory Diagnostic. Both run multiple times, both passed multiple times. I was able to find a CD based video diagnostic for ATI and the Video passed repeated stress test as well. Over Labor Day I conducted these test and re-installed windows 64-bit; on the following Monday windows informed me I needed to activate windows, so I verified the correct key and called to do so, successfully.
With that background given here is the question. Recently over the last two or three months, for no apparent reason, mainly on boot the fan races to top speed and the system shuts down to protect itself. I researched this a little and found one cause to be inadequate airflow over the CPU to keep it cool; the recommendation made sense to vacuum with a computer vacuum and be sure airflow is not somehow obstructed. I am now thinking all these problems are related to the CPU temp sensor. Is it on the CPU fan or the motherboard, and can raising the fan speed in BIOS help prevent the problem, particularly if it on the motherboard.
John M Gray II

My pentium 4 3.0c stock Intel fan is 4.44 watts. Isn't the mobo designed for this?
Also, can the sys fan header have the speed sensor activated by a bios fix or is it a hardware issue where it just does not exist? If hardware, seems strange since Corecell shows sys fan.
Regards

T61 with memory leak on XP for driver battc.sys

Hi
I have an issue with XP where the battc.sys module that is part of Windows XP and responsible for the kernel side of monitoring the battery status. This module continually leaks memory until I have no more kernel paged resources left and programs start to fail on my laptop.
I raised a support case for this with Microsoft and after some investigation and upgrading to the latest T61 power drivers that were released a few days ago on the Lenovo site, MS support told me it is a fault of the T61 and that I would need to disable Microsoft APCI support to stop this memory leak from occuring and to take the issue up with Lenovo.
I have used the verifier tool to confirm that it is the Windows XP SP3 battc.sys memory module leaking.
I am running the latest T61 drivers and fully patch with MS drivers on SP3.
As MS have told me it is the fault of the T61 I am posting this issue here.
Thanks
Stephen

It is memory available to the kernelwhich itself does not show under a process in task manager as far as I am aware (unles it is taken account as part of the system process).
The best way to measure the available kernel memory space available is by using sysinternals procexp.
You need to download procexp and also install the windows debugging tools from Microsoft. Then in procexp set the "Options > Configure Symbols : Debughlp.dll path" to the new debughlp.dll installed with your debu tools and set the symbols path to srv*c:\Symbols*http://msdl.microsoft.com/download/symbols
Then you can choose in procexp "View > System Information" and see the used and total paged and non-paged kernel memory space.
poolmon helps monitor all the symbols that are taking up this memory and verifier lets you drill down to the exact module and the changes in memory for a module that is occuring.
Here are two really good links on it
http://blogs.msdn.com/ntdebugging/archive/2006/12/18/Understanding-Pool-Consumption-and-Event-ID_3A0...
http://blogs.msdn.com/ntdebugging/archive/2008/05/08/tracking-down-mmst-paged-pool-usage.aspx
In my poolmon i notice that Mmst and battc are taking alot of memory after my computer has been running for some time. Mmst being high is normal but battc should not continually be growing as it is which is why I raised the case to MS but they want verification it is not a Lenovo issue.

Am unable to get the data from Sys.databases when i use where condition for column owner_sid

Hi all,
Help me here when i try am unable to get a data,Can some one help me with a query to get.
If it cant be done can i know why..
select * from Sys.databases
where owner_sid='0x01'
What am trying is to get a login
names from syslogin
table with respect to Sid.
Select a.name,b.name,a.owner_sid from Sys.databases a
Join Syslogins b
on a.owner_sid = b.sid
where owner_sid like '0x01'
Thanks all in Advance.....

Below are a couple of examples of how to accomplish the task. Note that SID is varbinary so the literal should not be enclosed in quotes.
SELECT
a.name AS DatabaseName
,b.name AS OwnerName
,a.owner_sid AS OwnerSID
FROM sys.databases a
JOIN sys.server_principals b ON
a.owner_sid = b.sid
WHERE owner_sid = 0x01;
SELECT
a.name AS DatabaseName
,SUSER_SNAME(owner_sid) AS OwnerName
,a.owner_sid AS OwnerSID
FROM sys.databases a
WHERE a.owner_sid = 0x01;
Dan Guzman, SQL Server MVP, http://www.dbdelta.com

Postoffice-startup-file not copied from SYS-volume

We migrated a Groupwise 7.02-postoffice from a Netware 6.5-Sp5-server to a
SLES10-SP1-server with the Novell GroupWise Migration Utility.
When we started gwpoa the postoffice-startup-file was not
in /opt/novell/groupwise/agenst/share/
We looked in the migration-logfile and we saw these messages
10/27/07 02:32:23 Configuring agent(s)...
10/27/07 02:32:23 Running remote command:
sh /tmp/groupwise/software/addagent.sh -
b /opt/novell/groupwise/agents/bin/gwpoa -
s /tmp/groupwise/software/p006.poa -h /var/opt/novell/groupwise/mail/p006 -
v 7
/tmp/groupwise/software/addagent.sh: line
135: /tmp/groupwise/software/p006.poa: No such file or directory
mv: cannot stat `/tmp/p006.poa.tmp.16849': No such file or
directory
cp: cannot stat `/tmp/groupwise/software/p006.poa': No such file
or directory
10/27/07 02:32:25 Remote command failed (1)
This is were our sourcefiles were:
Post Office:
Source database path: \\fileserver\VOL1\DATA\GRPWISE\P006\
Destination path: /var/opt/novell/groupwise/mail/p006
Agents:
Post Office Agent:
Path to startup file: \\fileserver\SYS\SYSTEM\p006.poa
As you see, our startup-file was on another volume then the postoffice.
In the migration-log we only saw a mount of the postoffice-volume, so we
think there is a bug in the migration utility. It does not copy the
startup-file if it is on another volume (in this case on the SYS-volume).
Or did we something wrong?
At last we solved our problem by copying (and editing) a startup-file
to /opt/novell/groupwise/agenst/share/
Regards,
Jeroen van der Klaauw

It happens between the full dbcopy and the incremental dbcopy, when the
agent is configured.
Jeroen van der Klaauw
> When the migration agent finishes the migration of the data there are
> the second and third phases that the application runs through - 2) to
> install the agents and 3) configure them. If you bombed out before
> that third phase then I would understand...
>
>
>
> On Mon, 29 Oct 2007 15:55:53 GMT, [email protected] wrote:
>
> >We migrated a Groupwise 7.02-postoffice from a Netware 6.5-Sp5-server
to a
> >SLES10-SP1-server with the Novell GroupWise Migration Utility.
> >When we started gwpoa the postoffice-startup-file was not
> >in /opt/novell/groupwise/agenst/share/
> >We looked in the migration-logfile and we saw these messages
> >
> >10/27/07 02:32:23 Configuring agent(s)...
> >10/27/07 02:32:23 Running remote command:
> >sh /tmp/groupwise/software/addagent.sh -
> >b /opt/novell/groupwise/agents/bin/gwpoa -
> >s /tmp/groupwise/software/p006.poa -
h /var/opt/novell/groupwise/mail/p006 -
> >v 7
> > /tmp/groupwise/software/addagent.sh: line
> >135: /tmp/groupwise/software/p006.poa: No such file or directory
> > mv: cannot stat `/tmp/p006.poa.tmp.16849': No such file or
> >directory
> > cp: cannot stat `/tmp/groupwise/software/p006.poa': No such file
> >or directory
> >10/27/07 02:32:25 Remote command failed (1)
> >
> >This is were our sourcefiles were:
> >
> >Post Office:
> > Source database path: \\fileserver\VOL1\DATA\GRPWISE\P006\
> > Destination path: /var/opt/novell/groupwise/mail/p006
> >
> >Agents:
> > Post Office Agent:
> > Path to startup file: \\fileserver\SYS\SYSTEM\p006.poa
> >
> >As you see, our startup-file was on another volume then the postoffice.
> >In the migration-log we only saw a mount of the postoffice-volume, so
we
> >think there is a bug in the migration utility. It does not copy the
> >startup-file if it is on another volume (in this case on the SYS-
volume).
> >Or did we something wrong?
> >
> >
> >At last we solved our problem by copying (and editing) a startup-file
> >to /opt/novell/groupwise/agenst/share/
> >
> >Regards,
> >
> >Jeroen van der Klaauw
> Tim
> ___________________
> Tim Heywood (SYSOP)
> NDS8
> Scotland
> (God's Country)
> www.nds8.co.uk
> ___________________
>
> In theory, practice and theory are the same
> In Practice, they are different

Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.

html,body{padding:0;margin:0;font-family:Verdana,Geneva,sans-serif;background:#fff;}html{font-size:100%}body{font-size:.75em;line-height:1.5;padding-top:1px;margin-top:-1px;}h1{font-size:2em;margin:.67em 0}h2{font-size:1.5em}h3{font-size:1.16em}h4{font-size:1em}h5{font-size:.83em}h6{font-size:.7em}p{margin:0
0 1em;padding:0 .2em}.t-marker{display:none;}.t-paste-container{;left:-10000px;width:1px;height:1px;overflow:hidden}ul,ol{padding-left:2.5em}a{color:#00a}code, pre{font-size:1.23em}
I get this message on two different machines installing SQL2014 developer edition, a Windows 7 and a Windows 8 machine. Both machines have SQL2005 through SQL2012 developer machines installed and working great. I have tried uninstalling all SQL2014 stuff and
installing again making sure I was running as an Administrator to no avail.
How do I look at sys.key_encryptionswhen the server will not start to finish installation?
The links in the log only provide the "We're Sorry" message.
This is the first error dialog info
TITLE: Microsoft SQL Server 2014 Setup
The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254026
The SQL Server error log has the message in the title.
2014-04-04 17:02:17.49 Server Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-04-04 17:02:17.49 Server UTC adjustment: -4:00
2014-04-04 17:02:17.49 Server (c) Microsoft Corporation.
2014-04-04 17:02:17.49 Server All rights reserved.
2014-04-04 17:02:17.49 Server Serverprocess ID is 9236.
2014-04-04 17:02:17.49 Server System Manufacturer: 'Hewlett-Packard', System Model: 'HP EliteBook8760w'.
2014-04-04 17:02:17.49 Server Authentication mode is MIXED.
2014-04-04 17:02:17.49 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Log\ERRORLOG'.
2014-04-04 17:02:17.49 Server The service account is 'NT Service\MSSQL$SQL2014'. This is an informational message; no user action is required.
2014-04-04 17:02:17.49 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\mastlog.ldf
2014-04-04 17:02:17.49 Server Command Line Startup Parameters:
-s "SQL2014"
-m "SqlSetup"
-Q
-q "SQL_Latin1_General_CP1_CI_AS"
-T 4022
-T 4010
-T 3659
-T 3610
-T 8015
2014-04-04 17:02:17.79 Server SQL Server detected 1 sockets with 4 cores per socket and 8 logical processors per socket, 8 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2014-04-04 17:02:17.79 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-04-04 17:02:17.79 Server Detected 8142 MB of RAM. This is an informational message; no user action is required.
2014-04-04 17:02:17.80 Server Using conventional memory in the memory manager.
2014-04-04 17:02:17.92 Server Default collation: SQL_Latin1_General_CP1_CI_AS (us_english1033)
2014-04-04 17:02:17.95 Server Perfmoncounters for resource governor pools and groups failed to initialize and are disabled.
2014-04-04 17:02:17.96 Server Query Store settings initialized with enabled = 1,
2014-04-04 17:02:17.97 Server The maximum number of dedicated administrator connections for this instance is '1'
2014-04-04 17:02:17.97 Server This instance of SQL Server last reported using a process ID of 8760 at 4/4/2014 5:02:08 PM (local) 4/4/2014 9:02:08 PM (UTC). This is an informational message only; no user action is required.
2014-04-04 17:02:17.97 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-04-04 17:02:17.97 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-04-04 17:02:18.00 Server Database Mirroring Transport is disabled in the endpoint configuration.
2014-04-04 17:02:18.00 spid7s Warning ******************
2014-04-04 17:02:18.00 spid7s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-04-04 17:02:18.01 spid7s Starting up database 'master'.
2014-04-04 17:02:18.02 Server Software Usage Metrics is disabled.
2014-04-04 17:02:18.07 Server CLR version v4.0.30319 loaded.
2014-04-04 17:02:18.11 spid7s 8 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2014-04-04 17:02:18.24 spid7s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2014-04-04 17:02:18.25 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2014-04-04 17:02:18.26 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-04-04 17:02:18.34 spid7s Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.
2014-04-04 17:02:18.40 spid7s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-04-04 17:02:18.40 spid7s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-04-04 17:02:18.44 spid7s SQL Trace ID 1 was started by login "sa".
2014-04-04 17:02:18.44 spid7s Server name is 'TOMGROSZKO-HP\SQL2014'. This is an informational message only. No user action is required.
2014-04-04 17:02:18.46 spid16s Error: 17190, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s Initializing the FallBackcertificate failed with error code: 1, state: 20, error number: 0.
2014-04-04 17:02:18.46 spid16s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-04-04 17:02:18.46 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s TDSSNIClientinitialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-04-04 17:02:18.46 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s TDSSNIClientinitialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-04-04 17:02:18.46 spid16s Error: 17826, Severity: 18, State: 3.
2014-04-04 17:02:18.46 spid16s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-04-04 17:02:18.46 spid16s Error: 17120, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s SQL Server could not spawn FRunCommunicationsManagerthread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
And a copy of the install log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-04-04 16:23:39
End time: 2014-04-04 17:06:25
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: TOMGROSZKO-HP
Machine processor count: 8
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2005 SQL2005 MSSQL.1 Database Engine Services
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 SQL Server Replication
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 Full-Text and Semantic Extractions for Search 1033
Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 SharedTools
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.2 Analysis Services
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.3 Reporting Services - Native
1033 Developer Edition (64-bit) 9.00.1399.06 No Yes
SQL Server 2005 DTS
1033 Developer Edition (64-bit) 9.4.5069 No
Yes
SQL Server 2005 Tools
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsClient
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsClient\Connectivity
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument\BOL
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument\Samples
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 NS
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 Database Engine Services 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 SQL Server Replication 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 Full-Text and Semantic Extractions for Search 1033 Developer
Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSAS10_50.SQL2008R2 Analysis Services 1033
Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSRS10_50.SQL2008R2 Reporting Services - Native 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 Management Tools - Basic
1033 Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 Management Tools - Complete
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools Connectivity
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools Backwards Compatibility
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools SDK
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Integration Services
1033 Developer Edition 10.51.2550.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Database Engine Services 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 SQL Server Replication 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Full-Text and Semantic Extractions for Search 1033
Developer Edition 11.1.3000.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Data Quality Services 1033
Developer Edition 11.1.3000.0 No Yes
SQL Server 2012 SQL2012 MSAS11.SQL2012 Analysis Services
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSRS11.SQL2012 Reporting Services - Native 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Management Tools - Basic
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Management Tools - Complete
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools SDK
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 BIDS
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL Server Data Tools - Business
Intelligence for Visual Studio 2012 1033 11.1.3402.0 No Yes
SQL Server 2012 Integration Services
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3128.0 No Yes
SQL Server 2012 Master Data Services
1033 Developer Edition 11.1.3000.0 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Downloads\SQL2014\SQL\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SQL2014
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\SQLData\MSSQL\SQL2014\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.SQL2014\OLAP\Config
ASDATADIR: C:\SQLData\MSSQL\SQL2014\OLAP
ASLOGDIR: C:\SQLData\MSSQL\SQL2014\OLAP
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSOLAP$SQL2014
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: TomGroszko-HP\Tom Groszko
ASTEMPDIR: C:\SQLData\MSSQL\SQL2014\OLAP
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, MDS
FILESTREAMLEVEL: 3
FILESTREAMSHARENAME: SQL2014
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQL2014
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQL2014
INSTANCENAME: SQL2014
ISSVCACCOUNT: NT Service\MsDtsServer120
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer$SQL2014
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: C:\SQLData\MSSQL\SQL2014\Backup
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQL2014
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: TomGroszko-HP\Tom Groszko
SQLTEMPDBDIR: C:\SQLData\MSSQL\SQL2014\Engine
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: C:\SQLData\MSSQL\SQL2014\Engine
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: Documentation Components
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\SystemConfigurationCheck_Report.htm
Any suggestions for what step to take next will be appreciated.
Thanks
Tom G.

Hi Tom,
Sorry for the delay. We can exclude the media factor since you were able to install it on VM with this media.
If I understand correctly, Shanky said “Abve message can also appear due to corrupt profile so deleteting old profile and creating new one and using this to install would also help.Make sure you always RK on setup.exe and select run as administrator” which
means your user account may be corrupted rather than the Virtual account. You can create a new Windows user account and use it to log into the system. Then, re-try the installation.
Additional information:
http://windows.microsoft.com/en-us/windows/create-user-account#create-user-account=windows-8
Thanks.
Tracy Cai
TechNet Community Support

Not able to recover and restore Lenovo V100 ; restarts after hanging at line mup.sys in safe mode.

Not able to recover and restore Lenovo V100 (WinXP professional) ; restarts after hanging at line mup.sys in safe mode.
Problem started occurring suddenly after restart of the laptop.
Windows XP start page (With dots moving) came up and I tried to restart the laptop in Safe mode.
It stopped at a line mup.sys and after a while restarted automatically.
Tried with inbuilt lenovo recovery and restore option.. but in vain...
each screen is very very slow.. I tried patiently (With restore back to factory settings options) but finally I got message that restore failed.
Can any body please help to me to resolve the Issue. I'm new to Tokyo and dont know any servicing center here :-(...
Any body from Tokyo ? can you tell me where the service center is here in Shinagawa?
Thanks in Advance....
Swami

Call Lenovo support in Japan and ask for a set of Recovery disks for your machine.
Japan --Desktops 0120-000-817
Notebooks 0570-064-400
9AM - 6PM
Everyday
Except Second Sunday of the month, Year end

Sys 10.4.2

Similar Messages

Maybe you are looking for