SYS-170101: System Exception

Hello,
A job failed with this error :
(12.2) 07-16-10 16:25:48 (E) (1081374:0001) SYS-170101: System Exception <Signal 9> occurred in the context <>
The version of ou DI is BODS 12.2, running on a AIX machine 5.3
The job read some Sybase IQ tables and updates a table still on Sybase IQ
The job starts the dataflow and then fail
(12.2) 07-16-10 16:08:06 (1146920:0001) DATAFLOW: Data flow <DF_xxx> using PAGEABLE Cache with <3578 MB> buffer pool.
(12.2) 07-16-10 16:25:48 (1081374:0001) WORKFLOW: Work flow <WF_xxx> is terminated due to an error <170101>.
(12.2) 07-16-10 16:25:48 (1081374:0001)      JOB: Job <Job_xxx> is terminated due to error <170101>.
Thank you for your help

hi,
any help on the below error log...,
4488
6608
SYS-170101
2/5/2014 10:56
|Session TRANS_ARCHIVE102013|Work flow TrArchive 1-31_10_2013|Data flow TARCH_FLOW
4488
6608
SYS-170101
2/5/2014 10:56
System Exception <ACCESS_VIOLATION> occurred. Process dump option is off. Process is not dumped.
4488
6608
SYS-170101
2/5/2014 10:56
Call stack:
4488
6608
SYS-170101
2/5/2014 10:56
(null)
4488
6608
SYS-170101
2/5/2014 10:56
Registers:
4488
6608
SYS-170101
2/5/2014 10:56
RAX=00000000752D1648 RBX=0000000000209AB8 RCX=0000000000209AB8 RDX=0000000000000160 RSI=00000000094D2D90
4488
6608
SYS-170101
2/5/2014 10:56
RDI=0000000009406970 RBP=0000000000000000 RSP=00000000002099C0 RIP=000000007526730A FLG=0000000000010206
4488
6608
SYS-170101
2/5/2014 10:56
R8=0000000000000000 R9=00000000FFFFFFFF R10=0000000000310039 R11=00000000093EA270 R12=0000000000372640
4488
6608
SYS-170101
2/5/2014 10:56
R13=0000000081D6FEC0 R14=000000000020A008 R15=000000000020A030
4488
6608
SYS-170101
2/5/2014 10:56
Exception code: C0000005 ACCESS_VIOLATION
4488
6608
SYS-170101
2/5/2014 10:56
Fault address:  000000007526730A 01:000000000002630A
4488
6608
SYS-170101
2/5/2014 10:56
C:\Windows\WinSxS\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_88df89932faf0bf6\MSVCP80.dll
4488
6608
SYS-170101
2/5/2014 10:56
==========================================================
4488
6608
SYS-170101
2/5/2014 10:56
Collect the following and send to Customer Support:
4488
6608
SYS-170101
2/5/2014 10:56
1. Log files(error_*, monitor_*, trace_*) associated with this failed job.
4488
6608
SYS-170101
2/5/2014 10:56
2. Exported ATL file of this failed job.
4488
6608
SYS-170101
2/5/2014 10:56
3. DDL statements of tables referenced in this failed job.
4488
6608
SYS-170101
2/5/2014 10:56
4. Data to populate the tables referenced in the failed job. If not possible, get the last few rows (or sample of them) when
4488
6608
SYS-170101
2/5/2014 10:56
the job failed.
4488
6608
SYS-170101
2/5/2014 10:56
5. Core dump, if any, generated from this failed job.
4488
6608
SYS-170101
2/5/2014 10:56
==========================================================
4488
6608
SYS-170101
2/5/2014 10:56
|Session TRANS_ARCHIVE102013|Work flow TrArchive 1-31_10_2013|Data flow TARCH_FLOW
4488
6608
SYS-170101
2/5/2014 10:56
System Exception <ACCESS_VIOLATION> occurred. Process dump option is off. Process is not dumped.
4488
6608
SYS-170101
2/5/2014 10:56
Call stack:
4488
6608
SYS-170101
2/5/2014 10:56
(null)
4488
6608
SYS-170101
2/5/2014 10:56
Registers:
4488
6608
SYS-170101
2/5/2014 10:56
RAX=00000000752D1648 RBX=0000000000209AB8 RCX=0000000000209AB8 RDX=0000000000000160 RSI=00000000094D2D90
4488
6608
SYS-170101
2/5/2014 10:56
RDI=0000000009406970 RBP=0000000000000000 RSP=00000000002099C0 RIP=000000007526730A FLG=0000000000010206
4488
6608
SYS-170101
2/5/2014 10:56
R8=0000000000000000 R9=00000000FFFFFFFF R10=0000000000310039 R11=00000000093EA270 R12=0000000000372640
4488
6608
SYS-170101
2/5/2014 10:56
R13=0000000081D6FEC0 R14=000000000020A008 R15=000000000020A030
4488
6608
SYS-170101
2/5/2014 10:56
Exception code: C0000005 ACCESS_VIOLATION
4488
6608
SYS-170101
2/5/2014 10:56
Fault address:  000000007526730A 01:000000000002630A
4488
6608
SYS-170101
2/5/2014 10:56
C:\Windows\WinSxS\amd64_microsoft.vc80.crt_1fc8b3b9a1e18e3b_8.0.50727.4940_none_88df89932faf0bf6\MSVCP80.dll
4488
6608
SYS-170101
2/5/2014 10:56
==========================================================
4488
6608
SYS-170101
2/5/2014 10:56
Collect the following and send to Customer Support:
4488
6608
SYS-170101
2/5/2014 10:56
1. Log files(error_*, monitor_*, trace_*) associated with this failed job.
4488
6608
SYS-170101
2/5/2014 10:56
2. Exported ATL file of this failed job.
4488
6608
SYS-170101
2/5/2014 10:56
3. DDL statements of tables referenced in this failed job.
4488
6608
SYS-170101
2/5/2014 10:56
4. Data to populate the tables referenced in the failed job. If not possible, get the last few rows (or sample of them) when
4488
6608
SYS-170101
2/5/2014 10:56
the job failed.
4488
6608
SYS-170101
2/5/2014 10:56
5. Core dump, if any, generated from this failed job.
4488
6608
SYS-170101
2/5/2014 10:56
==========================================================

Similar Messages

  • Error: SYS-170101 System Exception Signal 6 occurred in the context.

    Hi,
    The following error appears while executing a job.
    SYS-170101 System Exception <Signal 6> occurred in the context.
    DS version: BOXI 3.2
    Source: Oracle
    Target SAP BW
    Job Server is on AIX
    Has anybody dealt with this error?  Any suggestions wil be a great help.
    Thanks in advance.
    Hitesh

    Hi Expert,
    I am also facing same error, can anyone please let help in it?

  • RUN-050505 -SYS-170101 - Error

    Hi,
    My ETL job failed due to the below reason .
    I am reading 70K records and comparing against 1.5 million records using table comparison transform (pageable cache ) by one primary key against 70 columns .
    But the next run went successfully without issue with same dataset.
    Any clue?  i dont have any transformation logics applied . i am in DI 11.7.3.2 and my repository version shows 11.7.0.
    (11.7) 03-18-10 04:04:58 (E) (0760:4268) RUN-050505: |Dataflow DF_TEDI_ACCESSION|Loader ACCESSION_ACCESSION
    Unknown error in transform <ACCESSION_ACCESSION>.
    (11.7) 03-18-10 04:05:09 (E) (6064:5872) SYS-170101: |Session JOB_TEDI_LOAD|Workflow WF_TEDI_LOAD|Workflow WF_TEDI_ACC_PRO_SEQ|Workflow WF_TEDI_ACCESSION|Dataflow DF_TEDI_ACCESSION
    System Exception <> occurred.
    Call stack:
    (null)
    Registers:
    EAX=00211B00 EBX=007BC09A ECX=00000000 EDX=00334648 ESI=00211B90
    EDI=00211B90 EBP=00211B50 ESP=00211AFC EIP=7D4E2366 FLG=00000206
    CS=7D610023 DS=7C35002B SS=7D61002B ES=7C35002B FS=FFFF0053 GS=7C38002B
    Exception code: E06D7363
    Fault address: 7D4E2366 01:00012366 C:\WINDOWS\syswow64\kernel32.dll

    Hi,
    We are getting the 170101 error as follows:
    Error:
    672114     1     SYS-170101     4/5/2010 8:46:31 PM     System Exception <Signal 11> occurred in the context <>
    Environment is as follows:
    AIX 6.1
    DB2 9.5
    Designer:  12.2.1.3
    Jobserver: 12.2.1.1
    Jobengine: 12.2.1.1
    Repo:  12.2.0.0000
    Any ideas on how to correct this issue? 
    Thanks, and have a SPARKLING day, wherever you are!
    Deb

  • How to view list of all system exceptions from standard package?

    Hello,
    How to view list of all system exceptions from standard package?
    Regards
    Krishna

    Just for fun:
    SQL> conn sys/****** as sysdba
    Verbonden.
    SQL> select cast(trim(substr(text,instr(text,'(')+1,instr(text,',')-instr(text,'(')-1)) as varchar2(30)) exception_name
      2       , to_number(replace(substr(text,instr(text,',')+1,instr(text,')')-instr(text,',')-1),'''')) error_number
      3    from user_source
      4   where text like '%pragma EXCEPTION_INIT%'
      5     and type = 'PACKAGE'
      6     and name = 'STANDARD'
      7   order by exception_name
      8  /
    EXCEPTION_NAME                 ERROR_NUMBER
    ACCESS_INTO_NULL                      -6530
    CASE_NOT_FOUND                        -6592
    COLLECTION_IS_NULL                    -6531
    CURSOR_ALREADY_OPEN                   -6511
    DUP_VAL_ON_INDEX                         -1
    INVALID_CURSOR                        -1001
    INVALID_NUMBER                        -1722
    INVALID_OBJECT_NAME                  -44002
    INVALID_QUALIFIED_SQL_NAME           -44004
    INVALID_SCHEMA_NAME                  -44001
    INVALID_SQL_NAME                     -44003
    LOGIN_DENIED                          -1017
    NO_DATA_FOUND                           100
    NO_DATA_NEEDED                        -6548
    NOT_LOGGED_ON                         -1012
    PROGRAM_ERROR                         -6501
    ROWTYPE_MISMATCH                      -6504
    SELF_IS_NULL                         -30625
    STORAGE_ERROR                         -6500
    SUBSCRIPT_BEYOND_COUNT                -6533
    SUBSCRIPT_OUTSIDE_LIMIT               -6532
    TIMEOUT_ON_RESOURCE                     -51
    TOO_MANY_ROWS                         -1422
    USERENV_COMMITSCN_ERROR               -1725
    VALUE_ERROR                           -6502
    ZERO_DIVIDE                           -1476
    26 rijen zijn geselecteerd.Regards,
    Rob.

  • Unable to create new user when logged as SYS or SYSTEM user. Oracle 11g

    Hello I installed oracle 11g databse. The installation went OK.
    But when I tried to create a new user or alter an existing I always got "ORA-01031: insufficient privileges".
    However I was able to alter SYS user when I was loged in as SYS or SYSTEM user when I was loged in as SYSTEM.
    I am also able to create new tables, drop tables, query tables, create and drop synonyms and all other things except manipulate with users;
    Can anybody tell me where could be the problem?
    Thanks a lot in advance.
    Message was edited by:
    user609545

    I have checked the roles DBA, RESOURCE..(I am sorry byt I dont know what is role CREATE). SYS user has all these roles with admin option and default checked.
    I am using oracle Enterprise manager, but I dont know where should I click on the red mark? Where can I find it?

  • System.Exception: null or empty values

    Have designed a 4 part form Using DW MX, ASP.NET C# and MySQL
    and currently getting the below error when moving from one page to
    the next.
    The web.config file is on the server, there are no null or
    empty values, and the key tags match.
    I am new to applicaiton development in DW and am now stuck -
    any suggestions?
    System.Exception: This page has a MM:DataSet, MM:Insert,
    MM:Update or MM:Delete tag with a null or empty value for the
    ConnectionString and DatabaseType attributes.
    Often, such values come from application settings in the
    web.config file. That file might be missing from the server
    executing this page. Or, it might be missing the particular add key
    tags for the database connection this page uses. If you are using
    Dreamweaver, look for the web.config file in the local root folder
    of your Dreamweaver site. Once you find this file, you can either:
    Put this file onto the server that is executing this page.
    Copy the add key tags from the web.config in the local root
    folder of your Dreamweaver site and paste them into the web.config
    file in the server that is executing this page.
    at DreamweaverCtrls.DataSet.DoInit()
    Text

    http://java.sun.com/docs/books/tutorial/uiswing/components/spinner.html#model
    Might be a good start.

  • System exception while deleting the file from app server in background job

    Hi All,
    I have a issue while the deleting the file from application server.
    I am using the statement DELETE DATASET in my program to delete the file from app server.
    I am able to delete the file from the app server when i run the program from app server.
    When i run the same report from background job i am getting the message called System exception.
    Is there any secuirity which i need to get the issue.
    Thank You,
    Taragini

    Hi All,
    I get all the authorization sto delete the file from application serever.
    Thing is i am able to run the program sucessfully in foreground but not in the background .
    It i snot giving any short dump also just JOB is cancelled with the exception 'Job cancelled after system exception ERROR_MESSAGE'.
    Can anybody please give me suggestion
    Thanks,
    Taragini

  • Job cancelled after system exception ERROR_MESSAGE

    Hello all
    I am facing the following issue.
    A custom report is schedulled and run as backround job. The report should create a txt file on server.
    The report works fine in foreground, but as backround job ends up cancelled all the time.
    The job log:
    Job log overview for job:    VI5 / 13072800
    Date       Time     Message text                                                                     Message class Message no. Message type
    27.03.2009 13:09:28 Job started                                                                           00           516          S
    27.03.2009 13:09:28 Step 001 started (program ZESSRIN110R, variant PR1_0000381, user ID METAPARTNER)      00           550          S
    27.03.2009 13:09:28 File creation ERROR:                                                                  00           001          E
    27.03.2009 13:09:28 Job cancelled after system exception ERROR_MESSAGE                                    00           564          A
    There is no info in SM21 regarding the error.
    Can anybody help with this?
    Thanx in advance.
    imi
    Edited by: Imrich Vegh on Mar 27, 2009 2:27 PM

    btw the part of my code  looks like this:
    server path check
        IF p_srv IS NOT INITIAL.
          OPEN DATASET gv_server FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
          IF sy-subrc EQ 0.     --- I keep receiving 8 here in BACKGROUND JOB
            WRITE : / text-077,  gv_server.
          ELSE.
            MESSAGE text-069 TYPE 'E'.
          ENDIF.

  • Job cancelled after system exception ERROR_MESSAGE in DB13

    Hello All,
    When i opened the t-code DB13 i saw that this job "Mark tables requiring statistics update" is cancelled.
    JOB LOG:
    12.02.2011  22:00:16  Job started
    12.02.2011  22:00:16  Step 001 started (program RSDBAJOB, variant &0000000000085, user ID 80000415)
    12.02.2011  22:00:18  Job finished
    12.02.2011  22:00:18  Job started
    12.02.2011  22:00:18  Step 001 started (program RSADAUP2, variant &0000000000081, user ID 80000415)
    12.02.2011  22:01:26  Error when performing the action
    12.02.2011  22:01:26  Job cancelled after system exception ERROR_MESSAGE
    When check for the BGD Job in SM37 for this job i found the same error in the job log with the status cancelled.
    Job log overview for job:    DBA!PREPUPDSTAT_____@220000/6007 / 22001700
    12.02.2011 22:00:18 Job started
    12.02.2011 22:00:18 Step 001 started (program RSADAUP2, variant &0000000000081, user ID 80000415)
    12.02.2011 22:01:26 Error when performing the action
    12.02.2011 22:01:26 Job cancelled after system exception ERROR_MESSAGE
    I couldn't find any logs in SM21 of that time also no dumps in ST22.
    Possible reason for this error:
    I have scheduled the job Check database structure (only tables) at some other time and deleted the earlier job which was scheduled during the bussiness hours which caused performance problem.
    So to avoid performance issue i scheduled this job in the mid night by cancelling the old job which was scheduled during the bussiness hours.
    And from the next day i could see this error in DB13.
    Rest all the backups are running fine but the only job getting cancelled is for "Mark tables requiring statistics update"
    Could anyone tell me what should i do to get rid of this error?
    Can i schedule this "Mark tables requiring statistics update" again by deleting the old one?
    Thanks.
    Regards.
    Mudassir Imtiaz

    Hello Adrian,
    Thanks for your response.
    Every alternate day we used to have performance issue at 19:00hrs.
    Then when i checked what is causing this problem, i discovered that there was a backup "Check Database Structure (tables only)" scheduled at this time and it was mentioned that this backup may cause performance issue.
    Then i changed "Check Database Structure (tables only)" the time of this backup to 03:00hrs.
    The next day when i checked DB13 i found that one of the backups failed.
    i.e. "Mark Tables Requiring Statistics Update"
    Then i checked the log which i posted earlier with the error: "Job cancelled after system exception ERROR_MESSAGE"
    I posted this error here and then i tried to delete the jobs scheduled i.e. "Mark Tables Requiring Statistics Update" and then re-schedule it at the same time and interval.
    And then it started working fine.
    So i just got curious to know the cause of the failure of that job.
    Thanks.
    Regards,
    Mudassir.Imtiaz
    P.S There is one more thing which i would like to say which is not related to the above issue, and m sorry to discuss this in this thread.
    I found a few Bottlenecks in ST04 with Medium and High priority.
    Medium: Selects and fetches selectivity 0.53%: 122569 selects and fetches, 413376906 rows read, 2194738 rows qualified.
    High: 108771 primary key range accesses, selectivity 0.19%: 402696322 rows read, 763935 rows qualified.
    There are a lot these.
    I would really appreciate if you tell me what is the cause for these Bottlenecks and how to resolve.
    Thanks a lot.

  • Recovering from service call timeouts and other system exception ?

    Hi,
    I have a BPM project and i do call many web services . When the calls doesn't return in less then the timeout settings the bpm flow is getting suspended and doesn't give me an option recover through EM.
    How can I make the flow recoverable through EM for system exceptions ? I already did this for business exceptions, I mean if a service throws an exception I can do a retry through EM.
    Using 11.1.1.6
    Thanks

    Hi,
    I have a BPM project and i do call many web services . When the calls doesn't return in less then the timeout settings the bpm flow is getting suspended and doesn't give me an option recover through EM.
    How can I make the flow recoverable through EM for system exceptions ? I already did this for business exceptions, I mean if a service throws an exception I can do a retry through EM.
    Using 11.1.1.6
    Thanks

  • System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).

    I have been trying to install a piece of software on 2 Windows 7 PCS called Rightfax...during installing I get the error below;
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
    It then gives me an error log of ;
    2015-04-23 14:43:03Z: Error: Unexpected problem occurred in task worker
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
    2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
              at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
              at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    2015-04-23 14:43:03Z: Error: Problem in sequence or one of its pages
           System.Exception: An error occurred during the Microsoft VSTO Tools 4.0 install (exit code was -2146762485).
              at CommonInstall.Tasks.InstallTask.LaunchInstall(String friendlyName, String exe, String args, Int32[] exitCodesToIgnore)
              at CommonInstall.Tasks.InstallVSTO.OnRun(ITaskFeedback feedback)
              at TaskWizard.Task.Run(ITaskFeedback feedback, Boolean recurse)
              at TaskWizard.TaskWorker.RunTasks()
              at TaskWizard.TaskWorker.OnDoWork(DoWorkEventArgs e)
              at CommonInstall.PreparationWorker.OnDoWork(DoWorkEventArgs e)
              at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
    2015-04-23 14:43:03Z: Info: Page changed from 'WizardWorkerPage' to 'ResultPage' driven by result 'Next' and exception 'none'
    2015-04-23 14:44:06Z: Info: Page changed from 'ResultPage' to 'none' driven by result 'Next' and exception 'none'
    2015-04-23 14:44:06Z: Info: Work has not been completed; install state will not be saved.
    2015-04-23 14:44:06Z: Info: Reboot status = NotRequired
    2015-04-23 14:44:06Z: Info: Exitcode = 0
    2015-04-23 14:44:06Z: Info: Logging ended.
    I have installed this software succesfully on other machines previously.....

    Hi RyanWelsh78,
    This forum is discussing about Visual Stuido Tools for Office developing, your issue is related with the installing Rightfax add-in which is a third party product. As the reply from Eugene, you could contact Rightfax add-in developers for help.
    Thanks for your understanding.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Is there a way to handle system exception ERROR_MESSAGE?

    Hi,
    I have a program executed in background, which produces a bunch of consecutive documents for a set of Bulk Shipments -> TD Loading and TD Delivery Confirmation. To create those documents I use function modules 'OIGI_LOADING_CREATE' and 'OIGI_DEL_CONF_CREATE'  - both from Industry-Solution Oil-and_Gas (IS-Oil).
    In some cases these FM-s produces error messages (E-type) which cancel execution of the program and broke my flow-logic.
    Below are few messages recorded in a job log for my task:
    18.08.2005 15:56:41 Job started                                                                         
    18.08.2005 15:56:41 Step 001 started (program /PTRL/TAS_POSTPONDED_SYNC, variant , user name IMUTAFCHIEV)
    18.08.2005 15:56:58 Shipment 180753 saved                                                               
    18.08.2005 15:57:06 The plant data of the material 177 is locked by the user BMINKOV                    
    18.08.2005 15:57:06 The plant data of the material 177 is locked by the user BMINKOV                    
    18.08.2005 15:57:06 The plant data of the material 177 is locked by the user BMINKOV                    
    18.08.2005 15:57:06 Job cancelled after system exception ERROR_MESSAGE                                  
    Both function modules are not designed to handle any exceptions, and in owr environment (4.6c) there is no documented system exception 'ERROR_MESSAGE' which to be handled in CATCH-ENDCATCH block.
    Is there a way to handle this exception and to track the list of error messages produced by some FM into an internal table, log, whatever, as it is done in the log of the background job. I need to find a way write these messages in my log-tables and to proceed further with my flow-logic.
    FYI: my program executes an RFC call to a remote system and retrieve a list of documents which need to be synchronized with R/3. I loose information, if the R/3 broke my flow-logic.
    Any help would be highly appresiated.
    Many thanks in advance.
    Ivaylo Mutafchiev

    Sven,
    I made few programs where we used business scenario:
    IS-Oil Shipment => IS-Oil Loading Confirmation => IS-Oil Delivery Confirmation.
    All of them are based on Function Module call:
    1. OIGI_LOADING_CREATE and
    2. OIGI_DEL_CONF_CREATE.
    To load shipment I call 1st FM in a way:
      CALL FUNCTION 'OIGI_LOADING_CREATE' DESTINATION 'NONE'
           EXPORTING
                I_SUBRC     = 9  "save and commit
                I_SHNUMBER  = shNumber
                I_VEHICLE   = vehicle
                I_LDPLT     = plant
                I_LDDATE    = loadDate
                I_LDTIME    = loadTime
                I_LDCDAT    = loadDate
                I_VEH_NR    = veh_nr
           TABLES
                T_OIGISVMQ  = quantity_items
                T_OIGISVMQ2 = hpm_append
                T_OIGISIQ   = doc_quan_items
           EXCEPTIONS
                COMMUNICATION_FAILURE = 1 MESSAGE p_error
                SYSTEM_FAILURE = 2 MESSAGE p_error.
    To confirm shipment (status 4) I call the same FM with:
      CALL FUNCTION 'OIGI_LOADING_CREATE' DESTINATION 'NONE'
           EXPORTING
                I_SUBRC    = 39  "confirm & commit 2nd step
                I_SHNUMBER = shNumber
                I_VEHICLE  = vehicle
                I_LDPLT    = werks
           EXCEPTIONS
                COMMUNICATION_FAILURE = 1 MESSAGE sh_error
                SYSTEM_FAILURE = 2 MESSAGE sh_error.
    And finaly to finish process (status = 6) I call 2nd FM in a way:
      CALL FUNCTION 'OIGI_DEL_CONF_CREATE' DESTINATION 'NONE'
           EXPORTING
                I_SUBRC         = 19  "save, confirm and commit
                I_SHNUMBER      = shNumber
                I_RAPID_CONFIRM = 'X'
                I_DDCDAT        = loadDate
                I_DLDATE        = loadDate
                I_DLTIME        = loadTime
           EXCEPTIONS
                COMMUNICATION_FAILURE = 1 MESSAGE p_error
                SYSTEM_FAILURE = 2 MESSAGE p_error.
    FYI: It tooks me some time to 'investigate' and find correct use of these function modules. And I worked VERY CLOSE with our SD consultant.
    For details (what the export parameters and tables consist of) and sample code, please contact me at:
    ivaylo dot mutafchiev at vbs dot bg
    I would be glad to share my knowlege.
    Regards,
    Ivaylo

  • 'System.Exception: The request failed with HTTP Status 404

    Hi
    BPC version we are using is : 5.0.502
    When we  Publish all reports using the steps below:
    a. Log into BPC Web
    b. Click on Available Interfaces> Select BPC for Administration
    c. Under Web Admin Task Click Publish Reports
    d. Select all of the reports and click the green check mark to publish the
    reports.
    I am getting following message 'System.Exception: The request failed with HTTP Status 404: Not Found. Below are the event log relation to this error.
    Event Type:     Error
    Event Source:     OutlookSoft log
    Event Category:     None
    Event ID:     0
    Date:          12/8/2008
    Time:          11:26:42 AM
    User:          N/A
    Computer:     BPCAPP
    Description:
    ==============[System Error Tracing]==============
    [System  Name] : OSoftCPM
    [Message Type] : ErrorMessage
    [Job Name]     : AuditMgrService/SetAuditReportFiles
    [DateTime]     : 12/8/2008 11:26:42 AM
    [UserId]       : MMPlanning
    [Exception]
        DetailMsg  : {The request failed with HTTP status 404: Not Found.}
    ==============[System Error Tracing  End ]==============
    We tried ' Publish all reports' as the resolution of error 'object variable or with block variable not set' on modifying an application as per sap note Note 1131320
    If anyone knows the resolution for the above issue, please help me.
    Thanks in advance
    Sajeev Abraham

    Hi,
    This forum is for BI Integrated planning an BW/SEM BPS. For BPC related questions please post this message in the forum for Enterprise Performance Management (Enterprise Performance Management (SAP EPM)).
    Best regards,
    Gerd Schoeffl,
    SAP NetWeaver RIG BI

  • How to handle system exception in Sync communication without BPM? Help!

    Hi Experts
       I have a Synchronous scenario in XI: webservice <------>RFC SAP R/3.
      Webservice is making a sync call to RFC FM in SAP R/3 system.
       I want to handle system exception when SAP R/3 is down and send an email alert.    
       Can I achieve this in graphical mapping without BPM? How? Kindly provide necessary steps/screenshots for the same.
       Are there any other alternatives for handling system exception apart from mapping and BPM?  
    Thanks
    Gopal

    Hi GopalKirshna,
          Yes,You can handle the Exception if at all you are using the RFC.You can achieve this without using BPM.
       Using Fault message you can catch the System Exception and even the primary role for Fault Message is to catch the RFC Exceptions.
       Please refer the Fault messages Notes to achieve this you will understand better.
    Hope I am clear.
    Please let me if you have any more queries regarding this..!
    Thanks and Rewards,
    Chandu.

  • Error when executing APD-Job cancelled after system exception ERROR_MESSAGE

    Hi,
    We have a process chain which executes a APD using an ABAP program RSAN_PROCESS_EXECUTE.
    It was executing successfully until few days back but now a days frequently once in 3 days roughly it is getting cancelled during execution of ABAP Program with the message 'Job cancelled after system exception ERROR_MESSAGE'
    checked st22 and sm21 but didn't get any clue.But if we execute the same process chain manually(Immediate load) it is working fine all the times.
    What may be the reason for the cancellation of the chain sometimes and the same chain working fine some other time and working very much fine when ran manually.
    Regards,
    Vishnu

    Hi Vishnu,
    Can you check if there are any other process which is triggering the abap program RSAN_PROCESS_EXECUTE at the same time as the execution of this process in the chain.  You can check in which other chains this process is being used.  You can compare the time when this failed in the chain you mentioned with the same being run in other chains at the same time.
    Sasi

Maybe you are looking for