SYS.DBMS_CDC_PUBLISH errors during create table command

While trying to create tables I am getting the following errors.
@dv001_bld_emp_profile.sql
create table emp_profile_tbl (
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "SYS.DBMS_CDC_PUBLISH", line 326
ORA-06512: at line 3
I tried to reload the predefined Oracle packages by re-running the catproc.sql script but that had no effect.
Can you help???

I tried that but no luck yet, also tried put all in a single line, but the same error. It doesn't something tricky here, but actual problem with package. "ddl_markers" is new to 11g and not much documentation is available on that.
Also setting ddl_markers=N removed 3 columns from Publisher table, and the effect of it on Subscriber's view is still a gray area,

Similar Messages

  • Source sys Restore "error while creating table EDISEGMENT "

    Dear All,
    I am Basis person and recently we have refreshed data of Test BI system from Development BI system. we normally carry out these Refresh but In this case we have also changed Hostname and SID for Test BI system.
    We have done all BW refresh steps as per guide and during Restore of source system we
    are getting errors during datasource activation as  " error while creating table EDISEGMENT ".
    we have checked RFC and Partner profiles and working fine.
    We have 2 clients connected from source system to our Test BI box.strange thing is we got one source system activated without any errors and for second
    source system we are getting above mentioned error.
    We have reviewed notes 339957 , 493422 but our BI fuctional team is not sure whether
    those apply to our OLTP system , as one source system from same OLTP system got
    successfully activated and source system for other client giving this issue .
    Please help us out with this problem.
    we are running on BI 7.0 platform and ECC 6.0 for source.
    Regards,
    Rr

    check the relevant profiles in We20 t code and also in sm59 if the remote connection with autorisation is sucssessfull, connection is ok otherwise you need to check th paramters.
    hope this helps
    regards
    santosh

  • Error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR

    While loading master data for 0PLANT, its giving me following error.
    "error while creating table "EDISEGMENT' entry 'BIC/CIBA0PLANT_ATTR"
    Please help me out.
    Thanks

    steve,
    Can you give the solution you used to correct this problem?
    This error occurred in BW during import.
    Raj.

  • ME 808: System error: error during update Table EKAB

    Hi,
    Couple of years ago, during carve out, one of the contracts was deleted.
    A PO created against that contract carries some open quantities. Now our purchasing wants to close this PO, either by changing the quantity to delivered quantity (delivered quantity is lesser than PO quantity), or by checking the delivery complete box. But they are not able to do so, as there was no contract number exists in the system table.
    I propose to create a contract with the same number mentioned in the PO and then to change the quantity in the purchase req and PO. However now the system issues a dump error message "ME 808: System error: error during update Table EKAB".
    Can anyone help how to resolve the issue?
    Any body had similar situation?
    Thanks for your help.
    Regards,
    Shiva

    Hi,
    I am not sure how the external consultants deleted this contract during carve out.
    Our division was bought out from another company and moved the data to our SAP system.
    I checked the OSS and found note 922427 could resolve the issue.
    Thanks for your response.
    Regards

  • System Error During Insert (Table KNMT SUBRC 4)

    Hi All,
    I am getting a peculiar error when i try to update KNMT table using the FM RV_CUSTOMER_MATERIAL_UPDATE.
    When i run it directly in debug mode, entries are getting created perfectly.
    But when i run it through RFC, before the FM is executed itself, during validation, i am getting an error in the message queue stating "System Error During Insert (Table KNMT SUBRC 4).
    I cheked that KNMT table is empty. Also i had deleted all entries using the standard transaction VD52.
    I found that there is a certain FM RV_CUSTOMER_MATERIAL_UPDATE_C which is described as Posting program for customer-material info (CALL mode).
    But i am not sure what this does. I cannot view the documentation in my system and also this FM does not have any parameters.
    Kindly let me know if anyone has encountered an error like this... Please let me know of any suggestions for resolution.
    Thanks & Regards,
    Mz
    P.S : The Functionality seems to work intermittently... though not when i want it.
    Edited by: Mazin Mahmood on Dec 8, 2011 9:09 AM

    Hi,
    The issue was that i was calling the function module RV_CUSTOMER_MATERIAL_UPDATE using an RFC.(ABAP Proxy) For some reason, while using an RFC, there is some issue with this function module and the database commit .
    I had to recode using BDC (for transaction vd51) approach for creating a record in KNMT.
    Thanks All,
    Cheers,
    Mz

  • Error on Create Database command for Oracle 9i on Red Hat 9

    Error on Create Database command
    CREATE DATABASE ora9i
    LOGFILE
    GROUP 1 ('$HOME/ORADATA/log_01_01_ora9i.rdo') SIZE 10M,
    GROUP 2 ('$HOME/ORADATA/log_02_01_ora9i.rdo') SIZE 10M
    DATAFILE '$HOME/ORADATA/system_01_ora9i.dbf' SIZE 100M
    AUTOEXTEND ON NEXT 50M MAXSIZE 150M
    DEFAULT TEMPORARY TABLESPACE temp
    TEMPFILE '$HOME/ORADATA/temp_01_ora9i.dbf' SIZE 15M
    AUTOEXTEND ON NEXT 5M MAXSIZE 30M
    CHARACTER SET WE81SO8859P1
    NATIONAL CHARACTER SET AL16UTF16
    CREATE DATABASE ora9i
    ERROR at line 1:
    ORA-01092:ORACLE instance terminated. Disconnection forced.
    initora9i.ora file contents :
    background_dump_dest=$HOME/ADMIN/BDUMP
    core_dump_dest=$HOME/ADMIN/CDUMP
    db_name=ora9i
    db_files= 80
    db_file_multiblock_read_count=8
    db_block_buffers=100
    shared_pool_size = 3500000
    log_checkpoint_interval = 10000
    processes=50
    parallel_max_servers=5
    log_buffer = 32768
    max_dump_file_size = 10240
    global_name = TRUE
    control_files=$HOME/ORADATA/ctrl01.ctl
    undo_management=AUTO
    user_dump_dest=$HOME/ADMIN/UDUMP
    -------------------------------------------------

    Pleae include REUSE keyword at the end of each file location as shown below...
    CREATE DATABASE ora9i
    LOGFILE
    GROUP 1 ('$HOME/ORADATA/log_01_01_ora9i.rdo') SIZE 10M REUSE,
    GROUP 2 ('$HOME/ORADATA/log_02_01_ora9i.rdo') SIZE 10M REUSE
    DATAFILE '$HOME/ORADATA/system_01_ora9i.dbf' SIZE 100M REUSE
    AUTOEXTEND ON NEXT 50M MAXSIZE 150M
    DEFAULT TEMPORARY TABLESPACE temp
    TEMPFILE '$HOME/ORADATA/temp_01_ora9i.dbf' SIZE 15M REUSE
    AUTOEXTEND ON NEXT 5M MAXSIZE 30M
    CHARACTER SET WE81SO8859P1
    NATIONAL CHARACTER SET AL16UTF16

  • Error while creating table maintenance generator

    Hi,
    I am getting below error while creating table maintenance generator.
    Screen SAPLZtest   0002 could not be generated.   In DYNPFIELD_ATTR field LENGTH has the invalid value 241.
    Reason for that error might be:
    In the table I have a field with a dataelement(customized) of type Char and length 241.
    But in the other table Iam using the standard data element(standard) of same type(241 char).In this table Iam able to create table maintenance generator without any errors.
    And the domain Iam using is same for both the tables.
    Please help me to solve this.
    Thanks in advance,
    Sravanthi

    Hi,
    you can go to transaction se51 and go your screen. active it.. you can find thesolution.
    refer these links..
    Error in table control
    Error while creating table maintainence generator !
    Thanks and Regards,
    Ahamed.

  • Erro: "Error while creating table 'EDISEGMENT'"

    Pessoal bom dia,
    quando eu vou Ativar uma Regra de Transferência retona o seguinte erro:
    Error while creating table 'EDISEGMENT'
    não estou conseguindo desvendar o que pode ser isto, e a regra não ativa de jeito nenhum.
    Alguém já passou pelo problema?

    Please post this in the Portuguese Forum...
    Regards
    Juan

  • Error: "Error while creating table 'EDISEGMENT'"

    Hi,
    When I activate a Transfer Rule return the following error:
    Error while creating table 'EDISEGMENT'
    Someone has passed the problem?

    Bom dia Marques,
    Na SAP Note 339957 tem o síntoma descrito por você.
    Solução:
    In the system where the error occurs (usually the OLTP), create and run the report RS_CHECK_TS_EDISEGMENT (with SENDING and RECEIVING LOGSYS as an entry).
    Entretanto esta nota foi substituida pela SAP Note 493422, com bem mais detalhes e indica um programa Z
    Atenciosamente,
    Fernando Da Rós
    PS: Fórum em português.

  • Error while creating table 'EDISEGMENT' entry for Transfer Structures

    Hi Guyz...
    I've been facing a few issues regarding activation of transfer structures.
    I'll explain the whole process...so it makes sense to you guys.
    I've initially activated the Transfer Structures in BI Content for Master Data. Later on we faced some issues in the DEV server. So we had to transport all the objects and store them locally on a temporary location. When the BI DEV sever, was up and running, we transported all the objects back to the server.
    Now while moving the objects back to the sever. We had an errors in the Master Data Request (Log- Method Execution). After going into the log...this is what I found.
    Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DIVISION_TEXT'
    Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0DISTR_CHAN_TEXT'
    Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0MATL_TYPE_TEXT'
    Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALESORG_TEXT'
    Error while creating table 'EDISEGMENT' entry '/BIC/CIIA0SALES_GRP_TEXT'
    I hope, I am clear here.
    Any suggestions, guys...
    Thanks,
    Regards,
    G

    Hi,
    Please check this link:
    Error while creating table EDISEGMENT entry
    Hope it helps.
    Thanks and Regards,
    MuraliManohar.

  • Error while creating table 'EDISEGMENT' entry '/BIC/CIBD0BILBLK_DL_TEXT'

    Hi All,
    I am getting a error"Error while creating table 'EDISEGMENT' entry", when running the program RS_Transtru ActivateAll to activate the transfer rules as we had reconnected our source system,
    we are on 2004s server and on SP level 17, I understand that this issue is created as the transfer rules are using IDOC as transfer method, and I Cannot manually change the transfer method to PSA and activate  as the number of transfer rules with this  issue are huge in number.
    Please suggest the suitable solution
    Thank you in advance
    krishna
    Edited by: krishna dvs on Feb 17, 2009 1:24 PM

    Hi,
    Please check the note 493422. The reports listed in the note
    should correct the inconsistencies and afterwards you can re-import the
    request and it should then work.
    Regards,
    Srikanth

  • Error while creating table 'EDISEGMENT' entry '/BIC/CIWA0TRZONE_TEXT'

    Hi experts,
    when I import my transport request to QA, I am getting this error
    "Error while creating table 'EDISEGMENT' entry '/BIC/CIWA0TRZONE_TEXT'"
    the performance assistance reads as below..
    Message no. EA201
    Diagnosis
    An attempt was made to create the entry '/BIC/CIWA0TRZONE_TEXT' in table 'EDISEGMENT'. The attempt failed.
    System response
    The operation was canceled.
    Procedure
    Please check whether the relevant entry already exists
    I have an entry for '/BIC/CIWA0TRZONE_TEXT'  in the table 'EDISEGMENT' do need to delete it before importing the transport. How to delete this entry, I donot see the options in SE11 /SE16..
    thanks in advance
    D Bret

    Hi,
    can you please be more precise with your enquiry?
    As far as I read the note, it is quite explanatory....
    What is your source system release?
    You'll need to implement this prog in your source system and execute it there.
    If everything works and is fine, import to program in your QA/PROD source systems and rexecute it as specified in the note...
    does it answer your question
    Olivier.

  • Error while creating table 'EDISEGMENT' entry '/BIC/CIBB0DISTR_CHAN_TEXT'

    When I am activating the transfer rules of 0divison_text giving me the error
    Error while creating table 'EDISEGMENT' entry '/BIC/CIBB0DISTR_CHAN_TEXT'
    Message no. EA201
    Diagnosis
    An attempt was made to create the entry '/BIC/CIBB0DISTR_CHAN_TEXT' in table 'EDISEGMENT'. The attempt failed.
    System Response
    The operation was canceled.
    Procedure
    Please check whether the relevant entry already exists.
    I have checked the note 493422 but I did not understand it can any one help me in this
    I am  working on 7.o with  SP SAPKW70010

    Hi Priya,
    Delete entries for the data source in ROOSGEN,  EDISEGMENT and EDSAPPL tables, both on ECC and BI sides.
    Try activating the infosource again.  This should solve your problem.
    Sasi

  • Error while creating table 'EDISEGMENT' entry '/BIC/CIAC0CLASS_NUM_TEXT'

    Hello,
    I get the error message:
    "Error while creating table 'EDISEGMENT' entry '/BIC/CIAC0CLASS_NUM_TEXT'"
    when trying to activate my inactive transfer structure for 0CLASS_NUM_TEXT..
    Many other transfer structures work fine, but this one is really problematic.
    Has anyone seen it before? What do i do to solve it?
    Regards,
    F C

    Hi,
    Please check the note 493422. The reports listed in the note
    should correct the inconsistencies and afterwards you can re-import the
    request and it should then work.
    Regards,
    Srikanth

  • ORA - 00922 Missing or Invalid option error while creating table

    I am tryin to create a table with the following syntax
    1 CREATE TABLE TEST_FOR_SCRIPT (
    2 TEST_A NUMBER NOT NULL
    3 ,TEST_B VARCHAR2(30) DEFAULT 'UNDEFINED' NOT NULL
    4 )
    5* @storage_parms_table_cmn
    6 /
    @storage_parms_table_cmn
    ERROR at line 5:
    ORA-00922: missing or invalid option
    Here, storage_parms_table_cmn.sql reads like this
    tablespace DBK_CMN_DATA
    Can anyone please guide me how to overcome this error.

    What is your Oracle Version?
    i can do it exactly what you did without error
    sql> CREATE TABLE vd.TEST_FOR_SCRIPT (
    2 TEST_A NUMBER NOT NULL
    3 ,TEST_B VARCHAR2(30) DEFAULT 'UNDEFINED' NOT NULL
    4 )
    5 @test1.sql
    6 /
    Table created.
    Cheers
    http://fiedizheng.blogspot.com/

Maybe you are looking for