Sys password for windows

hi,
cna you let me know how to block / as sysdba entry in the windows box.
Actually i am able to login to the remote machine with the sys id. but unable to login to the local machine with the sys id or / as sysdba.
i have checked teh sqlnet.ora file.
sqlnet_authentication_services=nts
Hope by commenting this field wont allow to login directly as / as sysdba.
can you help me why / as sysdba didnt work wheni logged into the local machine
thanks in advance
cgprasad

Hallo,
as far as I know the Windows Group ORA_DBA is responsible for your problem. Every User in ORA_DBA Group is able to login as SYS without correct password.
HTH,
juergen_klinsmann

Similar Messages

For printer LaserJet Professional CM1410 any chance to set printing password for windows and MAC

Dear All
for printer LaserJet Professional CM1410 any chance to set printing password for windows and MAC?please help?

What Windows OS are you using? Are you networked?
If you are networked, you have to setup your file and print sharing options in order to require password assess. If you are just trying to control specific files from being printed, you can do that, too.
If you are just trying to control the amount of printing off of a single PC with a printer, you could setup different accounts for each user and limit their access.
Some of the commercial printers can have password options, but I do not find any password options for the CM 1410, other than what I provided earlier.
If I have been helpful, a Kudo is always appreciated.

10150:Error: You must provide the existing SYS password for the...

hi;
I am trying to make installation of db vault to r12.0.6 -db version 10.2.0.3.... While i trying to install i have this error:
10150:Error: You must provide the existing SYS password for the into which Oracle Database Vault will be installed. in component Oracle Database Vault Scripts 10.2.0.3.0 .Installation cannot continue
for this component.
anyone has idea?
PS: i found note and it says :
User Selected: Stop installation of this component only.
The workaround is to safely ignore the error.
but if i selected this option i back to begging and after next step its wait %90 and dont pass next step
thanks
helios

Hi hussein,
Ther is no log for it... its just through error message... by the way i run /runinstaller from my r12 oracle_home/oui/bin and show xml path where i unzipped oracle vault folder .
If i try to run /runinstall from oracle vault folder its gives me that error:
Your db version must be atleast 0.2.0.3 or higher...
My oraInst.loc shows true patch and value of. my db version is 10.2.0.3...
This server has r11 and discover too.. somehow OUI cant see my db version
wierd..

Username and password for Windows doesn't work for Safari

I just installed Safari 3.0.3 for windows under WindowsXP on local machine. But I have problem access local IIS.
Here is what I did:
1. type http://localhost in Safari
2. I get a pop up login window says "To view this page, you need to log in to area localhost on localhost:80",
3. I entered my username and password to Windows, then "Enter"
4. The pop up window comes back, it says "the name and password entered for are localhost on localhost:80 is incorrect."
I don't see this problem in IE or Firefox on the same machine. In Firefox, it pops a similar window ask for username and password, I entered the same username and password to Windows, it works. But in Safari, it doesn't.
I am wondering if anyone knows how to solve this problem. thanks.

Hi,
i've couple of ideas that might help...
1:
just wandering are either of you guys accessing the internet via a proxy server? if so i suspect that Safari is not by bypassing local addresses and hitting the proxy server first.
if this is the case, Safari should respect the same settings that IE does, so try setting IE and/or FF to bypass the proxy for local address/servers - and see if Safari now works...
2:
also, the text box that ask's you for your password, does it say on it somewhere, something like, "password will be sent clear" or "password will be sent encrypted"
i seem to get a similar problem, but with accessing our work ISA server, my localhost is fine btw. Anyway it might be the case the safari is trying to send a clear text password to an encrpyted password request or vica-verca (sp?) - soooo try setting your IIS to accept clear/basic authentation as well at NT Auth/Encrypted
ok, hope that helps, and make sense

What is the default password for Windows server r2?

What is the default password for the evaluation copy of Windows 2012 R2?
You can't log on and it wants to change the password , yet nothing works .
This is the non gui version. About to format it and install the GUI version to see if it doesn't have this bug.
Thanks

I downloaded from MS on Friday.
It refuses to let me set a password or log on. Tomorrow I will blow it off and try the gui version to see if it's any better.

Forgotten Administrator Password for Windows 7

I have a Gateway CPU that's running Windows 7. I have not used this desktop system in a while and have forgotten the password. I can get to the Welcome page because the system is not connected to the internet and I cannot connect to the internet because I have no password. Can someone please HELP????? I have rebooted several times. I have tried to write down all the passwords that I can remember. I have pressed F8 at reboot to get to the control panel, but due to the fact that I have two accounts setup--one as administrator and the other as a guest, it only takes me back to the signon to choose one or the other. I can access the guest account, but only have limited authoriy. However, i can click the start button and type command prompt in the search box, but what to do after this is unclear. PLEASE! PLEASE! PLEAE help me if you can with some clear and direct steps to take. Thanks in advance for all the help I am sure to get. klj4real

KLJ4real, welcome to the forum.
The best way is to reinstall Win 7. We can't help you with a lost password beyond that option.
You can, however, run Google search for a solution.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Default Administrator password for Windows XP PXIE-1062Q Controller

My PXIE controller was installed and setup with LabView (I assume) at NI. The OS is Windows XP, what is the Administrator password that was set during this process? ie how can I log in to the controller for the first time.
Thanks
Ian
Solved!
Go to Solution.

Try this:
http://www.mydigitallife.info/2006/11/25/easily-login-to-windows-xp-with-no-password-administrator-a...
Basically you press ctrl-alt-del twice when you get the login screen. Hopefully the administrator password hasn't actually been set, so you can just press ok or enter.
This is what I found on two used PXI systems that I bought at auction.
Because this is so simple I would strongly recommend setting an admin password as soon as you can.
Regards

WEP password for Windows machine

Hi to all,
Okay, got two refurbed airport express units from apple yesterday. I set them up in WDS mode and both my iMac and ibook are connected and working well. My wife tries to connect to the wireless network and it asks for the WEP password. I enter the password that I set up for the connection but this does not work. It is prompting me for a much larger password. Where can I find this password?
Thanks!
Greg

Glenn900, et al,
Thanks for your prompt response, but unfortunately I am not following these instructions very well. I am using WDS, which means that I have two basestation choices within the Airport Admin utility. One is the basestation, the other is the relay basestation. Which one do I double click? Assuming I click on the basestation, I get a large window that comes up with different categories:
Airport, internet, network, port mapping, access control, WDS, music. I do not see any lock icons in any of these sections. However, in looking into the button entitled "airport" there are several buttons that seem to be relevant: change password, base station options, change wireless security and wireless options. When I look at "change wireless security" I do get a window that addresses wireless security and has a box for the WEP passwords. This password is not shown however all I have is ••••••••••••••••••••••••••• I am thinking that I need to have that 128bit WEP password revealed to me so that I can input it into my wife's windows machine. How do I get that password?

SYSOP Password for Windows Single Box Install

During the calendar single box install of OCS 9.0.4.1 I did not have to imput the SYSOP password. What is this password?
Thank you in advance,
James

Disk 2 (1,974,136kb) and 3 (1,071,659kb) are very large downloads. If you are sure they downloaded correctly try a program like zip genius (www.zipgenius.it) to open them. Worked for me.

Factory set password for Windows Vista built-in administrator account?

I am attempting access the Vista built-in administrator account, which normally is not passworded unless the user does so. Mine, however, has a password that was set 11/20/2010 at 9:57:24 PM.
Was this p/w set by Toshiba? I assume so, as it was purchased directly from Toshiba. If so, any idea what that p/w would be? I need to use this account to recover my own admin account due to this error: The User Profile Service failed the logon. User profile cannot be loaded.
Machine is a Satellite P300 S/N 29020124W, Part # PSPC8U-01G00Q.
Thanks.

Satellite P300-ST3712
You receive a "The User Profile Service failed the logon” error message
How to Fix the Error "Your user profile was not loaded correctly! You have been logged on with a tem...
Was this p/w set by Toshiba?
No. But some programs like the Google Updater (if you added the Google Toolbar, Chrome or Google Earth) have been known to cause this problem.
-Jerry

Is it possible to reset device passwords in Windows Intune

Hello,
is it possible to have a device password for Windows Phone 8 device reset using Windows Intune in case a user forgets the password.
Thank you
Sascha

I know this is very old but I’m trying to clean up old posts. Did you ever solve this? If so it would be good if you could post the solution to assist others. If not, at this
stage, as nobody has answered, I would recommend that you call Intune support.
You will find your local Intune support number here
http://technet.microsoft.com/en-US/jj839713.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Sys password accepting anything

HI,
today morning i came across a wierd scenario.
I changed the sys password for database by using /* alter user sys identified by xxxx; */
also i updated the changed password in the password file.
everything went fine.
But again when i took a new session of sys for the same database it took any password i typed and logged me in the database as "SYS"
could anyone explain this..
Oracle version:10gR2
OS version-HP-UX
regards

today morning i came across a wierd scenario.
I changed the sys password for database by using /* alter user sys identified by xxxx; */
also i updated the changed password in the password file.
everything went fine.
But again when i took a new session of sys for the same database it took any password i typed and logged me in the database as "SYS"
could anyone explain this..You authenticated as OS user also SYS can connect with any password and owner of the ORACLE HOME.
SQL> conn sys/abc as sysdba
Connected.
SQL> conn sys/def as sysdba
Connected.
SQL> conn sys/hij as sysdba
Connected.
SQL>

SYSTEM and SYS password 11g on Windows Vista

Hello
I am having trouble. I do not know my SYSTEM and SYS passwords. I am using oracle 11g on windows vista. I tried to change the passwords but that did not work. I tried this:
c:/>sqlplus "/ as sysdba"
c:/>show user
c:/>passw system
then I changed the password. When I tried to log in the password change did not take effect. Any help would be great!

Hi,
There is no default password for sys and system in 11g.
you cna use the below command to change the system or sys password
alter user SYSTEM identified by PASWORD
same for sys
nOTE: password are case sensitive.Regards,
Taj

HT4796 I did all of the above and the migration was successful, but I don't know where the files are. It says they're under a different user, 'owner' . I tried to access via sys pref/system/users&groups, but it asks for a password for owner which I don'

Migration Assit , PC to MAC - The migration was successful, but I don't know where the files are. It says they're under a different user, 'owner' . I tried to access via sys pref/system/users&groups, but it asks for a password for owner which I don't have. What must I do to access my files?
My experience is with MS PC's I'm new with the MAC Book Pro.

Then, see if this works:
Mac OS X 10.6 Help- If you forget your administrator password
If you are running Lion or Mountain Lion you may need to do the following to access the same utility:
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu. Enter resetpassword at the prompt and press RETURN. Follow instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and OS X Lion- Apple ID can be used to reset your user account password.

PASSWORD FOR SYS

HI,
I GOT TRANSITION TO ONE DATABASE FROM DEVELOPERS BUT THEY DIDNT HAVE THE SYS USERNAME. ITS A WINDOW MACHINE. I TRIED TO LOG IN AS / AS SYSDBA BUT IT SAYS INSUFFIENT PRIVILEGE. SOMEONE HAS RESTARTED THE MACHINE,
CAN ANYONE HELP TO GET THE PASSWORD OR TO CRACK TEH PASSWORD FOR SYS
THANKS IN ADVANCE
PRASADC

Hi,
In Windows, the password file should be in %ORACLE_HOME%\database folder.
and the format of password file should be PWD%ORACLE_SID%.ora.
If the above violates you will get the error message "unable to open password file".
But connecting "/ as sysdba" doesn't require a password file.
Your problem is you don't have the ORA_DBA group or you didn't set the ORACLE_SID environment variable.
Check if you have the ORA_DBA group and the ORACLE_SID registry key/environment variable.

Sys password for windows

Similar Messages

Maybe you are looking for