SYS Reqs for a scanner using Acrobat 9

Using Windows for Acrobat 9. What would be the systems requirements for a scanner using Acrobat 9?

mocikey wrote:
Hello, I want to reduce the file size of a large number of pdfs which will be available for download on a website I'm building. These pdfs were created a few years ago and in most cases the fonts were converted to outlines. I want to reduce the size of the pdfs using Acrobat 9 Pro. I tried one and the size went from 2.3 Mb down to 156 Kb when I saved as an Acrobat 7. Will these be able to be viewed by anyone using Acrobat Reader. The end users will only be viewing and reading the pdfs. Thanks in advance for any responses.
If you are familar with the PDF Optimizer and how to go to it, open PDF Optimizer.
First images for a website should never be more than 150dpi.
Go to images and set, for DPI 150 for color images Grayscale and Monochrome.
Next open fonts in optimizer and look for duplicate fonts.
example:
Ariel
Ariel Bold
Ariel Bold
Ariel Italic
Courier New Bold
remove the duplicate Ariel Bold.
Many times there are 5-10 instances or more of the same Font/Font style.
Remove all duplicates.
Save as a new file you never want to save over your original in case what you end up with doesn't turn out.

Similar Messages

Create PDF from Scanner using Acrobat X Pro

I am using trial Acrobat X Pro. When I attempt to Create PDF documents from Scanner using Epson Perfection 4490 Photo flat-bed scanner I get pop-up that states Epson cannot be started. This also occurs when I Create PDF from Scanner > Custom Scan > Scanner when I select Epson Perfection 4490 scanner. My scanner is turned on when I attempt to create PDF from scanner. I have no problem scanning documents and then creating PDF documents from file, but I would like to eliminate this step. Thanks in advance--any suggestions would be greatly appreciated.

This is a tricky problems as hundreds have had the same problem. Research on the net demonstrated that no one had the solution. Some have even thrown perfectly good scanners away. The problem is most likely obtaining permission from Win 7 security. Don't bad mouth Adobe Acrobat or your scanner software. This solution will work and has been tested to work. You must be logged in as administrator. This will not help Mac User.
1. Find the file acroscanbroker.exe
2. Select properties
3. Select security tab
4. Select "users/*********
5. Edit settings
6. Full control Check box
7. Modify         Check box
8. Read and Execute    Check box
9. Read            Check box
10. Write           Check box
Your scanner should now work and any grayed out menus should come to life.

How to enable forms extenstion for adobe reader using Acrobat SDK?

Adobe acrobat GUI tool enables PDF forms designers to extend the use of Adobe Reader and allow the end user to save the PDF form locally using the Reader.
Is it possible to do the same kind of fuctionality at run time on the server using Acrobat SDK?.
We are creating several PDF Form on the server, is there any way we can use Acrobat SDK to enable form's extenstions programatically on the server after the PDF is created.
If Yes How? any code example?

Not using the Acrobat SDK, no.
However, Adobe sells the LiveCycle Reader Extensions Server that can be
used on a server for exactly this purpose.

Opening a .pdf in a Portfolio causes pop up "For best experienc use Acrobat 9 or Reader 9 or later."

I created a portfolio. In it is a converted Word doc .pdf with links to two other .pdf's that are inside the same portfolio. The other two .pdf's open normally when clicked on. The one with the links gives me a pop up message when the icon is clicked that is supposed to open one of the other .pdf's.
"For best experience, open this PDF portfolio in Acrobat 9 or Adobe Reader 9, or later." It shows as a cover sheet in the upper left hand corner. What is causing this and how do I turn that off so it opens the linked .pdf's normally?

Well, that's not my intention anyway unless I inadvertantly did something else by accident. My goal is:
Take a .docx with two pdf's embedded and convert it to a .pdf
Create a portfolio with the first .pdf in it and two other .pdf's in it as well.
Link the two icons in the first pdf to the the two other pdf's in the portfolio
This is so the user can open the first one and then only click on the icon to open the other pdf it's linked to. This is for part number control purposes so it must be this way. One part number = one pdf, the other part number = the other pdf.
I would be willing to email my original files to someone and have them try putting them together. It's not really confidential information, just not something I would want out on the web either though. I appreciate your patience with me on this. I've done it in the past but I have a new PC with W7 and fresh install of Acrobat 9 so I can't figure out what is different or why it's behaving this way. Also, now I can't reply to this thread with IE10 and had to switch over to Chrome to add this.

Publish the port forwarding rules and req. for customers to use the FiOS TV features they pay for!

Please read this thread and vote.
http://forums.verizon.com/t5/Share-Your-Ideas-with-Verizon/Publish-the-port-forwarding-rules-and-req...

Here they are, but - yes it would be great if Verizon published these, or at the very least linked to Actiontec's Website, where they publish the rules as well. or at least sticky some of these instructions here in the forums.
Instructional Video's and step by step detailed instructions for port forwarding
How to enable BASIC Port Forwarding on the MI424WR Verizon FiOS Router (actiontec.com)
How to Configure Advanced Port Forwarding on the MI424WR Verizon FiOS Router  (actiontec.com)
PCWintech's guide to portforwarding for the actiontec MI424WR (Verizon Firmware)
PCWintech's guide to portforwarding for the Westell 327w DSL Modem
PortForward.com
I put my vote in.
EDIT: I Didn't realize you were asking for the port forwarding rules to the features, I should have read better. But yes I agree with that too.

Using Acrobat SDK for Unix development environment

Hi,
Can it be possible for me to use Acrobat SDK for Unix development environment as a server application??If yes, what are the things that should be installed on the client side to make sure that the client should be able see the produced PDF files?? Kindly help me in this regard..
Deepak

lAnubisl wrote:
My customer's solution has several issues generating PDF files and we are looking at the Acrobat SDK as at the instance of the final truth.
I use Interop.Acrobat.dll as a .NET project reference to open and resave PDF documents. I'd like to do all things I mentioned above.
After years and years, I have concluded that if you do serious PDF development, you need a set of libraries. For instance, if you are doing typesetting type of work ("vertical center", "horizontal center", "margin", etc., etc) , there is an excellent library from a guy in Germany (land of Johannes Gutenberg and printing presses)...
... which turned out to be useless in my next project which dealt with AcroForms.
I know exactly what you mean by "the final truth", sometimes I wish Adobe had some sort of official validating tool (like XML does).
Per your comments, I would recommend you to consider this library. It is available in all languages and its output is the same quality as Adobe's or at least in the same league:
http://www.pdftron.com/pdfnet/index.html
If you want to comment further, we must go to a different forum, since we are not supposed to discuss any non-Adobe products here.

Upgraded MS Office 2010 to 2013, how do I get the pdf menu option in Word, Excel, etc - Using Acrobat X

Hi
Have just upgraded from MS Office 2010 to Office 2013.
Have lost the menu option "Acrobat" for creating pdfs (using Acrobat X).
How to I get it back?
Cheers

uninstall acrobat, clean (Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and reinstall acrobat.

Create new tag for selected text using API?

Hello,
I want to add new tag for the selected text just like 'Create Tag from selection' .
is it possible to create tag for selected text using acrobat api?
     please,help me.

As per sample of snippetRunner for adding tag for selected text.
I tried below code
PDPage pg;
AVDoc avDoc = AVAppGetActiveDoc();
PDDoc pd = AVDocGetPDDoc(avDoc);
    pg = PDDocAcquirePage(pd, 0);
ASAtom theSelectionType = AVDocGetSelectionType(avDoc);
if (theSelectionType == ASAtomFromString("Text")){
    PDTextSelect ts = static_cast<PDTextSelect>(AVDocGetSelection(avDoc));
    PDSTreeRoot pdsTreeRoot;
    CosObj pageObj = PDPageGetCosObj (pg);
    PDSElement newElem;
    PDSElementCreate(pd, &newElem);
    char buf1[64];
    strcpy (buf1, "A new structure element");
    // set its type as "Document" standard type
    PDSElementSetType(newElem, ASAtomFromString ("Document"));
    // set its title
    PDSElementSetTitle(newElem, reinterpret_cast<const ASUns8*> (buf1), strlen(buf1));
    PDSTreeRootInsertKid (pdsTreeRoot, aElem, kPDSAfterLast);
    PDSElementInsertMCAsKid // here something i have to add
If i have PDTextSelect how i can add tag for selected text.like user add tag using "CreateTagForSelectedText" option.
please,help me.
thanks.

I have created PDF from hardcopy by using my scanner. After I run OCR option for my PDF by using Acrobat Pro 9. But "Text-to-speech" functionality of the PDF says that an error message comes up that says the page is empty when I turns on the read out loud

I have created PDF from hardcopy by using my scanner. After I run OCR option for my PDF by using Acrobat Pro 9. But "Text-to-speech" functionality of the PDF says that an error message comes up that says the page is empty when I turns on the read out loud option in Acrobat. Kindly help me to sortout this problems?

So I tried generating the same PDFs on two other computers that have Acrobat 9 Pro. Results were reproduced. The verdict is:
- complex PDF files (that is, containing cross-references, tables of contents, and bookmarks) generated by Acrobat 9.x Pro are roughly 2-5x larger than the identical file generated with Acrobat 8.x Pro.
- different PDF conversion settings make a negligable difference (less than 10% rather than 70-80%).
- using the "Reduce File Size" or "Optimize PDF" option cuts the file size roughly in half, almost always resulting in a "image downsampling mask" warning message, which requires acknowledgement (that is a problem for batch processing or automation).
- adding an Acrobat watermark to the file cuts the file size roughly in half.
- just using Save As to another filename has no effect on file size.
- generating the PDF in Acrobat 9 with links but no PDF bookmarks still results in the inflated file size.
- generating the PDF in Acrobat 9 without any links or bookmarks results in approximately the same file size as the Acrobat 8 PDF with full links and bookmarks.
It appears that Acrobat 9's manner of adding links is what's bloating the files, and in my case it's probably not related to images or image resolution/print quality. It's a shame, because Acrobat 9 seems to have made some improvements to the Review Tracker interface, and a few other bells and whistles which I haven't really gotten around to exporing yet. But unless I find a way to keep my links and the PDF file sizes comparable to what I was getting with Acrobat 8 Pro, it looks like I'm going to stay with Acrobat 8.

Using Acrobat 9 Standard on desktop running Win 7 32Bit - and an HP1536dnf MFP - Scanner function

Using Acrobat 9 Standard on desktop running Win 7 32Bit - and an HP1536dnf MFP - Scanner function won't run - message states that driver missing - have tried to re-load original software many times from CD and download from HP website - that times out. Have tried many times to load in just driver - won't load-in. Have tried the unplug from power source and turning off firewall. Nothing works. Paid a lot of money for Acrobat and very helpful tool when I was running WinXP, but out of business since loading Win7 . . . . . . . Please help?

PSS love adobe wrote:
Have tried many times to load in just driver - won't load-in.
That sounds you are having a problem with the scanner driver, not Acrobat. Are you installing the Windows 7 drivers with the correct bitness?

Acrobat 8 for MAC, Scanner CanonScan Lide 30 Not Recognized

Hi,
I have a problem. I need to create pdf from the scanner but the scanner is not recognized by Adobe Acrobat 8. Does anyone have the same problem? Did you fix that problem? How? any help would be great,
Thanks in advance.
George
PS: I'm using Leopard V. 10.5.5

Unless your Scanner uses a Twain Driver recognized by, The Mac Computer system and therefore Acrobat. It will not work in Acrobat.
A work around is to use the SANE/Twain Driver from the S.A.N.E. Project. Google for SANE. It has to do with Scanners. Then locate when you get to site the link for Macintosh and click that.
choose the components needed for your system Unless you are developer stay away from the SDK's. Install all the components , restart computer, then open Acrobat and and go to section on on scanner and choose SANE device. your now set up to go through procedure to scan

Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.

html,body{padding:0;margin:0;font-family:Verdana,Geneva,sans-serif;background:#fff;}html{font-size:100%}body{font-size:.75em;line-height:1.5;padding-top:1px;margin-top:-1px;}h1{font-size:2em;margin:.67em 0}h2{font-size:1.5em}h3{font-size:1.16em}h4{font-size:1em}h5{font-size:.83em}h6{font-size:.7em}p{margin:0
0 1em;padding:0 .2em}.t-marker{display:none;}.t-paste-container{;left:-10000px;width:1px;height:1px;overflow:hidden}ul,ol{padding-left:2.5em}a{color:#00a}code, pre{font-size:1.23em}
I get this message on two different machines installing SQL2014 developer edition, a Windows 7 and a Windows 8 machine. Both machines have SQL2005 through SQL2012 developer machines installed and working great. I have tried uninstalling all SQL2014 stuff and
installing again making sure I was running as an Administrator to no avail.
How do I look at sys.key_encryptionswhen the server will not start to finish installation?
The links in the log only provide the "We're Sorry" message.
This is the first error dialog info
TITLE: Microsoft SQL Server 2014 Setup
The following error has occurred:
Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%25400x4BDAF9BA%25401306%254026
The SQL Server error log has the message in the title.
2014-04-04 17:02:17.49 Server Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Developer Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
2014-04-04 17:02:17.49 Server UTC adjustment: -4:00
2014-04-04 17:02:17.49 Server (c) Microsoft Corporation.
2014-04-04 17:02:17.49 Server All rights reserved.
2014-04-04 17:02:17.49 Server Serverprocess ID is 9236.
2014-04-04 17:02:17.49 Server System Manufacturer: 'Hewlett-Packard', System Model: 'HP EliteBook8760w'.
2014-04-04 17:02:17.49 Server Authentication mode is MIXED.
2014-04-04 17:02:17.49 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Log\ERRORLOG'.
2014-04-04 17:02:17.49 Server The service account is 'NT Service\MSSQL$SQL2014'. This is an informational message; no user action is required.
2014-04-04 17:02:17.49 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL12.SQL2014\MSSQL\DATA\mastlog.ldf
2014-04-04 17:02:17.49 Server Command Line Startup Parameters:
-s "SQL2014"
-m "SqlSetup"
-Q
-q "SQL_Latin1_General_CP1_CI_AS"
-T 4022
-T 4010
-T 3659
-T 3610
-T 8015
2014-04-04 17:02:17.79 Server SQL Server detected 1 sockets with 4 cores per socket and 8 logical processors per socket, 8 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2014-04-04 17:02:17.79 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-04-04 17:02:17.79 Server Detected 8142 MB of RAM. This is an informational message; no user action is required.
2014-04-04 17:02:17.80 Server Using conventional memory in the memory manager.
2014-04-04 17:02:17.92 Server Default collation: SQL_Latin1_General_CP1_CI_AS (us_english1033)
2014-04-04 17:02:17.95 Server Perfmoncounters for resource governor pools and groups failed to initialize and are disabled.
2014-04-04 17:02:17.96 Server Query Store settings initialized with enabled = 1,
2014-04-04 17:02:17.97 Server The maximum number of dedicated administrator connections for this instance is '1'
2014-04-04 17:02:17.97 Server This instance of SQL Server last reported using a process ID of 8760 at 4/4/2014 5:02:08 PM (local) 4/4/2014 9:02:08 PM (UTC). This is an informational message only; no user action is required.
2014-04-04 17:02:17.97 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2014-04-04 17:02:17.97 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-04-04 17:02:18.00 Server Database Mirroring Transport is disabled in the endpoint configuration.
2014-04-04 17:02:18.00 spid7s Warning ******************
2014-04-04 17:02:18.00 spid7s SQL Server started in single-user mode. This an informational message only. No user action is required.
2014-04-04 17:02:18.01 spid7s Starting up database 'master'.
2014-04-04 17:02:18.02 Server Software Usage Metrics is disabled.
2014-04-04 17:02:18.07 Server CLR version v4.0.30319 loaded.
2014-04-04 17:02:18.11 spid7s 8 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2014-04-04 17:02:18.24 spid7s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2014-04-04 17:02:18.25 spid7s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2014-04-04 17:02:18.26 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2014-04-04 17:02:18.34 spid7s Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.
2014-04-04 17:02:18.40 spid7s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2014-04-04 17:02:18.40 spid7s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2014-04-04 17:02:18.44 spid7s SQL Trace ID 1 was started by login "sa".
2014-04-04 17:02:18.44 spid7s Server name is 'TOMGROSZKO-HP\SQL2014'. This is an informational message only. No user action is required.
2014-04-04 17:02:18.46 spid16s Error: 17190, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s Initializing the FallBackcertificate failed with error code: 1, state: 20, error number: 0.
2014-04-04 17:02:18.46 spid16s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-04-04 17:02:18.46 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s TDSSNIClientinitialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-04-04 17:02:18.46 spid16s Error: 17182, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s TDSSNIClientinitialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-04-04 17:02:18.46 spid16s Error: 17826, Severity: 18, State: 3.
2014-04-04 17:02:18.46 spid16s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-04-04 17:02:18.46 spid16s Error: 17120, Severity: 16, State: 1.
2014-04-04 17:02:18.46 spid16s SQL Server could not spawn FRunCommunicationsManagerthread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
And a copy of the install log.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-04-04 16:23:39
End time: 2014-04-04 17:06:25
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for DQ: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: TOMGROSZKO-HP
Machine processor count: 8
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered Configured
SQL Server 2005 SQL2005 MSSQL.1 Database Engine Services
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 SQL Server Replication
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 Full-Text and Semantic Extractions for Search 1033
Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.1 SharedTools
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.2 Analysis Services
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 SQL2005 MSSQL.3 Reporting Services - Native
1033 Developer Edition (64-bit) 9.00.1399.06 No Yes
SQL Server 2005 DTS
1033 Developer Edition (64-bit) 9.4.5069 No
Yes
SQL Server 2005 Tools
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsClient
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsClient\Connectivity
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument\BOL
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 ToolsDocument\Samples
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2005 NS
1033 Developer Edition (64-bit) 9.4.5069 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 Database Engine Services 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 SQL Server Replication 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSSQL10_50.SQL2008R2 Full-Text and Semantic Extractions for Search 1033 Developer
Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSAS10_50.SQL2008R2 Analysis Services 1033
Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 SQL2008R2 MSRS10_50.SQL2008R2 Reporting Services - Native 1033
Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 Management Tools - Basic
1033 Developer Edition 10.51.2550.0 No Yes
SQL Server 2008 R2 Management Tools - Complete
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools Connectivity
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools Backwards Compatibility
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Client Tools SDK
1033 Developer Edition 10.51.2500.0 No Yes
SQL Server 2008 R2 Integration Services
1033 Developer Edition 10.51.2550.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Database Engine Services 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 SQL Server Replication 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Full-Text and Semantic Extractions for Search 1033
Developer Edition 11.1.3000.0 No Yes
SQL Server 2012 SQL2012 MSSQL11.SQL2012 Data Quality Services 1033
Developer Edition 11.1.3000.0 No Yes
SQL Server 2012 SQL2012 MSAS11.SQL2012 Analysis Services
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL2012 MSRS11.SQL2012 Reporting Services - Native 1033
Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Management Tools - Basic
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Management Tools - Complete
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools Connectivity
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools Backwards Compatibility
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 Client Tools SDK
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 BIDS
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 SQL Server Data Tools - Business
Intelligence for Visual Studio 2012 1033 11.1.3402.0 No Yes
SQL Server 2012 Integration Services
1033 Developer Edition 11.1.3128.0 No Yes
SQL Server 2012 LocalDB
1033 Express Edition 11.1.3128.0 No Yes
SQL Server 2012 Master Data Services
1033 Developer Edition 11.1.3000.0 No Yes
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Downloads\SQL2014\SQL\x64\setup\
Installation edition: Developer
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$SQL2014
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: C:\SQLData\MSSQL\SQL2014\Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: C:\Program Files\Microsoft SQL Server\MSAS12.SQL2014\OLAP\Config
ASDATADIR: C:\SQLData\MSSQL\SQL2014\OLAP
ASLOGDIR: C:\SQLData\MSSQL\SQL2014\OLAP
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: NT Service\MSOLAP$SQL2014
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: TomGroszko-HP\Tom Groszko
ASTEMPDIR: C:\SQLData\MSSQL\SQL2014\OLAP
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, DQ, AS, RS, RS_SHP, RS_SHPWFE, DQC, CONN, IS, BC, SDK, BOL, SSMS, ADV_SSMS, MDS
FILESTREAMLEVEL: 3
FILESTREAMSHARENAME: SQL2014
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SQL2014
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQL2014
INSTANCENAME: SQL2014
ISSVCACCOUNT: NT Service\MsDtsServer120
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: SharePointFilesOnlyMode
RSSVCACCOUNT: NT Service\ReportServer$SQL2014
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: C:\SQLData\MSSQL\SQL2014\Backup
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$SQL2014
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: TomGroszko-HP\Tom Groszko
SQLTEMPDBDIR: C:\SQLData\MSSQL\SQL2014\Engine
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: C:\SQLData\MSSQL\SQL2014\Engine
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: true
TCPENABLED: 0
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Data Quality Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Master Data Services
Status: Passed
Feature: Integration Services
Status: Passed
Feature: Data Quality Client
Status: Passed
Feature: Analysis Services
Status: Passed
Feature: Reporting Services - SharePoint
Status: Passed
Feature: Reporting Services Add-in for SharePoint Products
Status: Passed
Feature: Documentation Components
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140404_162339\SystemConfigurationCheck_Report.htm
Any suggestions for what step to take next will be appreciated.
Thanks
Tom G.

Hi Tom,
Sorry for the delay. We can exclude the media factor since you were able to install it on VM with this media.
If I understand correctly, Shanky said “Abve message can also appear due to corrupt profile so deleteting old profile and creating new one and using this to install would also help.Make sure you always RK on setup.exe and select run as administrator” which
means your user account may be corrupted rather than the Virtual account. You can create a new Windows user account and use it to log into the system. Then, re-try the installation.
Additional information:
http://windows.microsoft.com/en-us/windows/create-user-account#create-user-account=windows-8
Thanks.
Tracy Cai
TechNet Community Support

I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For mo

I am using Acrobat XI Pro and tried to install the current update. I got this error message: "Error 1328.Error applying patch to file C:\Config.Msi\pT64b3.tmp It has probably been updated by other means1 and can no longer be modified by this patch. For more information contact your patch vendor." tried uninstalling and reinstalling and still get the error. Searched for C:\Config.Msi\pT64b3.tmp and cannot find the path or the file

For AA XI, you only need the 11.0.09 patch. Download from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows (Use "MAC" if a MAC is used).

Using Acrobat X and creating a PDF File from EXCEL 2010, I notice that the Pagination restarts at 1 for each Worksheet included in the PDF.

I use Acrobat X Standard and created a PDF file from two or more worksheets using EXCEL 2010.
The resulting PDF file restarts the PAGE # (In header/footer settings of Excel) at 1 for each worksheet.
However, a colleague of mine who has Acrobat X Pro version, using EXCEL 2010 and same exact file does the same task, he gets a file that starts at page 1 and second worksheet continues the page # from the last page of the First worksheet.
We both are using the ACROBAT menu (not the print to Adobe printer) to create the file so that we can get Bookmarks included in the resulting file for each worksheet.
We cannot figure out any option in Acrobat's preferences that controls the pagination on either of these versions of Acrobat.
So is this just a feature that works one way in Standard version and another way in the Pro version, and the user has no control over it?

This is so sad. I read your comments and I said, "Huh?" Haha!
I tried the indexed color option and it did make the final file smaller. Around 600KB. But there's probably another way to make it even smaller like the gazillion-paged pdf file that I mentioned that was only about 300KB.
And by saying a layout program, does that mean like Adobe InDesign? Does that mean that I should just make my graphics in Photoshop and then import using another program and finish the file there?
What other layout programs can I use?
Thank you so much!

Is it possible to edit a file made with 8.1 for word using acrobat 9 pro??

I have a PDF file which seems to have been created using acrobat 8.1 file maker for Word. Is it possible to edit this file using acrobat 9 pro extended and if so how do i go about this..
When i select the tools menu, no options become available and there is no secuirty enabled on the file.
Thanks
Tony

bluuskii wrote:
I have a PDF file which seems to have been created using acrobat 8.1 file maker for Word. Is it possible to edit this file using acrobat 9 pro extended and if so how do i go about this..
When i select the tools menu, no options become available and there is no secuirty enabled on the file.
Thanks
Tony
If you have Acrobat Pro Extended that is a PC Product. You've clicked on wrong Forum. Go back to main page the click on Acrobat and choose PC forum. Extend has such features as XML based PDF Forms which Acrobat Pro Mac can't handle.

SYS Reqs for a scanner using Acrobat 9

Similar Messages

Maybe you are looking for