Syscopy (during Unicode convertion): Import on same tablespace layout

Hi forum,
we're working on a Unicode convertion of our ECC landscape made of Solaris
10 Sparc and Oracle 10.2.0.4.
We use the procedure described in UC for SAPNetWeaver 7.0 SP 14 and
higher. Export runs well without error
or problem in our db (1,6 TB of used space).
During import SAPinst show me a different, then source system,
tablespaces layout:
PSAPSR3
PSAPSR3700
PSAPSR3FACT
PSAPSR3ODS
PSAPSR3USR
SYSAUX
PSAPUNDO
PSAPTEMP
SYSTEM
But my soursce system was:
PSAPBTABD
PSAPBTABI
PSAPCLUD
PSAPCLUI
PSAPDDICD
PSAPDDICI
PSAPDIMD
PSAPDIMI
PSAPDOCUD
PSAPDOCUI
PSAPEL700D
PSAPEL700I
PSAPES700D
PSAPES700I
PSAPFACTD
PSAPFACTI
PSAPLOADD
PSAPLOADI
PSAPODSD
PSAPODSI
PSAPPOOLD
PSAPPOOLI
PSAPPROTD
PSAPPROTI
PSAPSOURCED
PSAPSOURCEI
PSAPSTABD
PSAPSTABI
PSAPTEMP
PSAPUNDO
PSAPUSER1D
PSAPUSER1I
PSAPZ***********
PSAPZ***********
PSAPZ***********
SYSAUX
SYSTEM
We have already read 425079, so, can we use source system layout?
can SAPinst use our previous tablespace layout during import? ... or do
we must it manualy?
Regards.

Hi,
>It is far better that you create the target database using the new layout. The old tablespace layout with multiple tablespaces and >data/index separation is no longer adapted to modern environments, and a Unicode conversion gives you a unique opportunity to >switch to a more appropriate structure for your DB.
So... to do it: I leave standard tablespace (without create my old tablespace PSAPZ*******) and then enlarge enough to load our tables? ... do I modify any other file/script for the import?
Regards.

Similar Messages

Error during Unicode Conversion - Import

Hi,
I am doing a Unicode conversion, done with the system export, while doing the
import during the Import ABAP phase system is throwing the error with R3load.
R3load -testconnect fails with following error.
emalonsbx002:wuuadm 18% R3load -testconnect
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
R3load: START OF LOG: 20071113095228
R3load: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#14 $ SAP
R3load: version R7.00/V1.4 [UNICODE]
Compiled Oct 20 2007 06:20:06
R3load -testconnect
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1033
DbSl Trace: CONNECT failed with sql error '1033'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1033
DbSl Trace: CONNECT failed with sql error '1033'
(DB) ERROR: db_connect rc = 256
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1033
DbSl Trace: CONNECT failed with sql error '1033'
DbSl Trace: OCI-call 'OCISessionBegin' failed with rc=1033
DbSl Trace: CONNECT failed with sql error '1033'
(DB) ERROR: DbSlErrorMsg rc = 99
R3load: job finished with 1 error(s)
R3load: END OF LOG: 20071113095230
Please let me know if anybody have any idea on this.
Thanks in advance.

Your database isn´t fully started yet (in shutdown or startup) - check your alert.log
Also see
Note 655240 - Composite SAP note: ORA-01033
Markus

Unicode convertion source=target

Hi,
I'm tring a Unicode convertion on a send-box system just copied from production system. I'm in export phase now in our Solaris 10 SPARC + Oracle 10.2.04 box
For the import I must use the same server, same <SID> name and system number... is it necessary to unistall previus ASCII istance and then re-install in Unicode? ... ora can I switch only the kernel from ASCII 2 Unicode? ... how?
Regards.
Ganimede Dignan.

Source system tablespaces..
PSAPBTABD
PSAPBTABI
PSAPCLUD
PSAPCLUI
PSAPDDICD
PSAPDDICI
PSAPDIMD
PSAPDIMI
PSAPDOCUD
PSAPDOCUI
PSAPEL700D
PSAPEL700I
PSAPES700D
PSAPES700I
PSAPFACTD
PSAPFACTI
PSAPLOADD
PSAPLOADI
PSAPODSD
PSAPODSI
PSAPPOOLD
PSAPPOOLI
PSAPPROTD
PSAPPROTI
PSAPSOURCED
PSAPSOURCEI
PSAPSTABD
PSAPSTABI
PSAPTEMP
PSAPUNDO
PSAPUSER1D
PSAPUSER1I
PSAPZACCTCRD
PSAPZACCTCRI
PSAPZACCTITD
PSAPZACCTITI
PSAPZAFVCD
PSAPZAFVCI
PSAPZAFVVD
PSAPZAFVVI
PSAPZAUSPD
PSAPZAUSPI
PSAPZBALDATD
PSAPZBALDATI
PSAPZBALHDRD
PSAPZBALHDRI
PSAPZBKPFD
PSAPZBKPFI
PSAPZBSIMD
PSAPZBSIMI
PSAPZBSISD
PSAPZBSISI
PSAPZCDHDRD
PSAPZCDHDRI
PSAPZCKISD
PSAPZCKISI
PSAPZCKITD
PSAPZCKITI
PSAPZCMFPD
PSAPZCMFPI
PSAPZCNVCLUD
PSAPZCNVCLUI
PSAPZCOEPD
PSAPZCOEPI
PSAPZCOSPD
PSAPZCOSPI
PSAPZCOSSD
PSAPZCOSSI
PSAPZEIPOD
PSAPZEIPOI
PSAPZEKBED
PSAPZEKBEI
PSAPZEKPOD
PSAPZEKPOI
PSAPZGLPCD
PSAPZGLPCI
PSAPZJESTD
PSAPZJESTI
PSAPZKONHD
PSAPZKONHI
PSAPZLIPSD
PSAPZLIPSI
PSAPZMARCD
PSAPZMARCI
PSAPZMARDD
PSAPZMARDI
PSAPZMBEWD
PSAPZMBEWI
PSAPZMCKALKWD
PSAPZMCKALKWI
PSAPZMDKPD
PSAPZMDKPI
PSAPZMDTBD
PSAPZMDTBI
PSAPZMSEGD
PSAPZMSEGI
PSAPZMSTAD
PSAPZMSTAI
PSAPZNASTD
PSAPZNASTI
PSAPZRESBD
PSAPZRESBI
PSAPZS022D
PSAPZS022I
PSAPZS026D
PSAPZS026I
PSAPZS027D
PSAPZS027I
PSAPZS033D
PSAPZS033I
PSAPZVBAPD
PSAPZVBAPI
PSAPZVBFAD
PSAPZVBFAI
PSAPZVBPAD
PSAPZVBPAI
PSAPZVBRPD
PSAPZVBRPI
SYSAUX
SYSTEM
But SAPinst show me only... on advanced db configuration:
PSAPSR3
PSAPSR3700
PSAPSR3FACT
PSAPSR3ODS
PSAPSR3USR
SYSAUX
PSAPUNDO
PSAPTEMP
SYSTEM
Why?

Unable to convert imported document to WSDL

Hi all, we're excperienced with a problem during the creation of an external definition with this WSDL file:
<?xml version="1.0" encoding="utf-8" ?>
- 
- <wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:ns1="urn:java/lang" xmlns:ns0="http://www.w3.org/2001/XMLSchema" xmlns:ns3="urn:java.lang" targetNamespace="urn:WSCatalogoServiceWsd/WSCatalogoServiceVi/rpc_enc" xmlns:ns2="urn:ws.catalogo.dto" xmlns:tns="urn:WSCatalogoServiceWsd/WSCatalogoServiceVi/rpc_enc">
- <wsdl:types>
- <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="urn:java/lang" xmlns:tns="urn:java/lang" elementFormDefault="qualified">
- <xs:complexType name="ArrayOfString">
- <xs:complexContent>
- <xs:restriction xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" base="soapenc:Array">
<xs:attribute ref="soapenc:arrayType" wsdl:arrayType="xs:string[]" nillable="true" />
</xs:restriction>
</xs:complexContent>
</xs:complexType>
</xs:schema>
- <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="urn:java.lang" xmlns:tns="urn:java.lang" elementFormDefault="qualified">
- <xs:complexType name="Exception">
- <xs:complexContent>
- <xs:extension base="tns:Throwable">
<xs:sequence />
</xs:extension>
</xs:complexContent>
</xs:complexType>
- <xs:complexType name="Throwable">
- <xs:sequence>
<xs:element name="message" type="xs:string" nillable="true" minOccurs="0" />
</xs:sequence>
</xs:complexType>
</xs:schema>
- <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="urn:meli.org.ngc.common.model" xmlns:tns="urn:meli.org.ngc.common.model" elementFormDefault="qualified">
- <xs:complexType name="Titolo">
- <xs:complexContent>
- <xs:extension base="tns:ModelInfo">
- <xs:sequence>
<xs:element name="autore" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="collana" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="collana_num_interno" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="committente" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="copieGratuite" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="copieGratuiteAmmesse" type="xs:boolean" />
<xs:element name="copieOrdinate" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="disponibilita" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="ean" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="editore" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="editoreId" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="formatoPrezzo" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="fornitureBloccate" type="xs:boolean" />
<xs:element name="isbn" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="nota" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="pagamentoOccasionale" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="pagamentoOccasionaleGiorni" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="prezzo" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="qtaDisponibile" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="riga" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="rispostaEditore" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="rispostaEditoreDesc" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="sovraScontoOccasionale" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="statoVendita" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="statoVenditaDesc" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="tempoInserimento" type="xs:long" />
<xs:element name="titolo" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="vendibilita" type="xs:string" nillable="true" minOccurs="0" />
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
- <xs:complexType name="ModelInfo">
<xs:sequence />
</xs:complexType>
- <xs:complexType name="ArrayOfTitolo">
- <xs:complexContent>
- <xs:restriction xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" base="soapenc:Array">
<xs:attribute ref="soapenc:arrayType" wsdl:arrayType="tns:Titolo[]" nillable="true" />
</xs:restriction>
</xs:complexContent>
</xs:complexType>
</xs:schema>
- <xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" targetNamespace="urn:ws.catalogo.dto" xmlns:tns="urn:ws.catalogo.dto" elementFormDefault="qualified" xmlns:s0="urn:meli.org.ngc.common.model">
<xs:import namespace="urn:meli.org.ngc.common.model" />
- <xs:complexType name="InfoTitoli">
- <xs:sequence>
<xs:element name="codErrore" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="paramErrore" type="xs:string" nillable="true" minOccurs="0" />
<xs:element name="titoli" type="s0:ArrayOfTitolo" nillable="true" minOccurs="0" />
</xs:sequence>
</xs:complexType>
</xs:schema>
</wsdl:types>
- <wsdl:message name="autenticaUtenteIn">
<wsdl:part name="userName" type="ns0:string" />
<wsdl:part name="password" type="ns0:string" />
</wsdl:message>
- <wsdl:message name="autenticaUtenteOut">
<wsdl:part name="Response" type="ns0:boolean" />
</wsdl:message>
- <wsdl:message name="leggiTitoliDaArrayCodiciIsbnEanIn">
<wsdl:part name="codiciIsbnEan" type="ns1:ArrayOfString" />
<wsdl:part name="userName" type="ns0:string" />
<wsdl:part name="password" type="ns0:string" />
</wsdl:message>
- <wsdl:message name="leggiTitoliDaArrayCodiciIsbnEanOut">
<wsdl:part name="Response" type="ns2:InfoTitoli" />
</wsdl:message>
- <wsdl:message name="leggiTitoliDaArrayCodiciIsbnEan_java.lang.Exception">
<wsdl:part name="leggiTitoliDaArrayCodiciIsbnEan_java.lang.Exception" type="ns3:Exception" />
</wsdl:message>
- <wsdl:message name="leggiTitoliDaAttachmentIsbnEanIn">
<wsdl:part name="inputFile" type="ns0:base64Binary" />
<wsdl:part name="userName" type="ns0:string" />
<wsdl:part name="password" type="ns0:string" />
</wsdl:message>
- <wsdl:message name="leggiTitoliDaAttachmentIsbnEanOut">
<wsdl:part name="Response" type="ns2:InfoTitoli" />
</wsdl:message>
- <wsdl:portType name="WSCatalogoServiceVi_Rpc_enc">
- <wsdl:operation name="autenticaUtente">
<wsdl:input message="tns:autenticaUtenteIn" />
<wsdl:output message="tns:autenticaUtenteOut" />
</wsdl:operation>
- <wsdl:operation name="leggiTitoliDaArrayCodiciIsbnEan">
<wsdl:input message="tns:leggiTitoliDaArrayCodiciIsbnEanIn" />
<wsdl:output message="tns:leggiTitoliDaArrayCodiciIsbnEanOut" />
<wsdl:fault name="java.lang.Exception" message="tns:leggiTitoliDaArrayCodiciIsbnEan_java.lang.Exception" />
</wsdl:operation>
- <wsdl:operation name="leggiTitoliDaAttachmentIsbnEan">
<wsdl:input message="tns:leggiTitoliDaAttachmentIsbnEanIn" />
<wsdl:output message="tns:leggiTitoliDaAttachmentIsbnEanOut" />
</wsdl:operation>
</wsdl:portType>
</wsdl:definitions>
The error is:
Unable to convert imported document to WSDL
Reason: Attribute nillable=true is not permitted at position <wsdl:definitions><wsdl:types><xs:schema><xs:complexType><xs:complexContent><xs:restriction><xs:attribute>
Check the selected category
Can anyone help us ?
Thanks in advance
Best regards
Gianfranco Bello

Hi Gianfranco Bello
Can you try and remove atrribute <b>nillable</b>=true from your wsdl
It may sound awkward but it worked for me i had a same problem with my wsdl
Regards
Mitesh

Import of a tablespace using a tablespace different name

Hi,
i'm trying to import a transportable tablespace into the same database it was exported from, but using a different name; the import utility fails saying that it can't find the original tablespace.
The parameters used during export and import are:
exp 'sys/pwd@host as sysdba'
transport_tablespace=yes
tablespaces=test_tbs
direct=yes
triggers=no
constraints=no
buffer=100000
file=test_tbs.dmp
imp 'sys/pwd@host as sysdba'
transport_tablespace=yes
tablespaces=test_tbs
file=test_tbs.dmp
buffer=100000
datafiles='test_tbs.dbf'
Both tools are spawned as child processes of my application.
Is there any way to import a tablespace with a new name or to rename the tablespace after import. Needless to say, that I can't predict the new name at export time.
What I basically want to do, is to imitate the "Attach/Detach Database" feature of mssql.
Thanks in advance
Heiko

You can't rename tablespace with transport_tablespace features. Read the piece of information extracted from the metalink note : 103013.1
Transported tablespaces are plugged in in a read-only configuration, however the file header also stores the tablespace name, so any attempt to rename it would require an update to the file header. Similarly at unplug time there is a requirement that the tablespace is in read only mode and the same restrictions therefore apply - you can't 'RENAME' a tablespace, because you might only be taking a copy of the datafile.

I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes The app continually crashes during the picture import. AND by the way it takes 10-15 minutes before it even attempts to import photos. The screen says impo

I have continuously over the last 6 months struggled with syncing my iphone and ipod with itunes The app continually crashes during the picture import. AND by the way it takes 10-15 minutes before it even attempts to import photos. The screen says importing photoes but doesnt try to optimize or anything for 10 minutes. I have a 3gs with 16Gb so its not a cheap phone. I have 10Gb free. I have 6600 photoes. This is very frustrating and undermines my confidence in your products. My ipod is an ipod 4 with 16Gb also. It does the exact same thing to it. The last time, I had to import photoes a few at the time and with it taking 10-15 minutes each time for 6600 photos it is a long frustrating process. But it will import every photo a few at a time. The error message is just that itunes has stopped working. no hint as to why. AND of course, my phone is out of use for the entire time. You guys must not want to believe ur phones are a necessary tool...or maybe you dont want the consumer to believe it is. I have tried to find solutions on your website as well as through other 3rd party communities. Ultimately they were of no use. I stumbled onto my solution by accident since Im a bit of a computer geek...a semi-geek.

I have this issue too, I went into my Windows event viewer. (should have looked at this a year ago when this started)
it said this
Faulting application name: iTunes.exe, version: 11.0.2.26, time stamp: 0x51253247
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
Exception code: 0xc0000374
Fault offset: 0x000ce6c3
Faulting process id: 0x14d4
Faulting application start time: 0x01ce194399f166ba
Faulting application path: C:\Program Files (x86)\iTunes\iTunes.exe
Faulting module path: C:\Windows\SysWOW64\ntdll.dll
Report Id: 0eb3c37f-8537-11e2-9351-50465d6737de
basically whenever I try to sync my ipod touch 4G 64GB it crashes iTunes when it begins the pictures. if im lucky ill get 4-5 on there before it stops responding. its not my system or anything im running win7x64 8GB DDR3 ram (Corsair XMS3) AMD FX Eight core processor.
It is silly that iTunes cannot add pictures to apple devices. it shatters whatever incline I may have to buy apple products. knda like the Airport Extreem router my dad bought the new firmware, caused my router to not function... why release firmware that breaks a product. -_- <-- off topic but still

Error during unicode conversion

Dear all,
we are facing one issue during unicode conversion. the code is as follows:
FIELD-SYMBOLS : <n> TYPE X,
                             <c> TYPE C.
DATA : a TYPE i.
DATA : x TYPE x.
MOVE <n> TO a.
a = a + 22.
MOVE a TO x.
ASSIGN x TO <c> CASTING TYPE c
and we are getting the following error:
ERROR : the length of "X" in bytes must be a multiple of the size of a Unicode character (regardless of the size of the unicode character
please guide on how this can be resolved in ECC.
Regards,
N.Jain

Hi,
here is some code to do it:
FIELD-SYMBOLS : <n> TYPE x,
                <c> TYPE c.
DATA : a TYPE i.
DATA : x TYPE x.
MOVE <n> TO a.
a = a + 22.
MOVE a TO x.
DATA:
buffer TYPE xstring,
conv TYPE REF TO cl_abap_conv_in_ce,
x_char.
buffer = x.
conv = cl_abap_conv_in_ce=>create(
       encoding = 'NON-UNICODE'
       input = buffer
CALL METHOD conv->read(
EXPORTING
    n    = 1
IMPORTING
    data = x_char
ASSIGN x_char TO <c>.
Regards
Walter Habich
Edited by: Walter Habich on Jun 10, 2008 4:09 PM

Usage of Conversion Classes During Unicode Conversion

Hi,
I have code
"TRANSLATE BBKF-SGTXT FROM CODE PAGE '0100' TO '0120'" Now During Unicode i need to Use the Conversion classes
Can any one help to proceede further on this
Actually I am using CL_ABAP_CONV_OUT_CE and I am getting the Data in Binary Format But I want that to be in Character format can any one suggest me
Thanks & Regards,
Prasad

Do you have an EBCDIC system with code page 0100? (check it using SNLS transaction)
In that case, CL_ABAP_CONV_OUT_CE is okay.
After having converted to code page 0120 (into xstring), here is how to cast xstring variable to character.
DATA x TYPE x LENGTH 800. " so that to compile, x length
" must be a multiple of 4 (don't ask why)
FIELD-SYMBOLS <c> TYPE c.
x = xstring. "make sure x is long enough
ASSIGN x TO <c> CASTING.
BBKF-SGTXT = <c>.

Minimize downtime during UNICODE conversion

Hello forum !
I am looking at the UNICODE conversion of a large (?) SAP Oracle database for ECC. The Database it self is at about 10 TB. UNICODE converting this in one single run will take too long to fit inside the company defined tolerable downtime window.
When looking at the data I find that the largest 50 tables makes up about 75% of the total database size. Most of the 50 largest tables have data for several years back, and I am able to partition the tables with one partition pr year.
The good thing about this is that I am able to make the partitions with old data (more than one year old data) READ-ONLY.
My assumption is that I will be able to UNICODE convert 60-70% and create the indexes for these partitions without taking down the database to be converted.
Now,- doing the downtime-phase I will be able to exclude the old partitions of the largest tables in the export since I have already created a new UNICODE database with these objects and thereby drastically reducing the required downtime.
Is there anyone who has any experience with an approach like the one I have schetched out here ?
Kjell Erik Furnes

Can you please be a bit more specific on your installation? How long is your possible downtime (export time should be about 2/3 of that)? How long is your actual export estimation? Do you have suitable hardware (CPU/disk)?
What you absolutely need to have:
[1043380 - Efficient Table Splitting for Oracle Databases|https://service.sap.com/sap/support/notes/1043380] -> export tables with ROWID splitting
[855772 - Distribution Monitor|https://service.sap.com/sap/support/notes/855772] -> enables distributed and parallel export/import
So on the hardware side you will need, a storage subsystem as fast as possible with two copies of the disks (one for exporting and one for importing). A bunch of application servers with fast CPUs helps a lot, everything connected with at least gigabit ethernet.
If you knew all this already, sorry for the spam. But i achived throughputs at about 400gb/hour on a medium sized hardware, i think throughputs of 1tb/hour should be possible (not talking about cluster tables
Regards, Michael

Export and re-import on same database

For one reason or another we want to do a full export and re-import all the data back into the same tablespaces... is there a command to imp to tell it to truncate and over-write all the data before importing? or do I have to manually drop all the tables? (by manual I mean write a script to do it) -- and/or drop all the schemas

Not sure, why you want to export and import back the same thing into the same database, but anyways to answer your question, yes it is possible with Oracle10g by using TABLE_EXISTS_ACTION={SKIP | APPEND | TRUNCATE | REPLACE}. With Oracle9i, you may have to generate a dynamic script to truncate tables....make sure you exclude SYS/SYSTEM tables from the truncate script.........did I say except SYS/SYSTEM and so on :-)
HTH
Thanks
Chandra Pabba

Export Import with different tablespaces

Does anyone know if there is a way to export from one database (creating a dmp file) and then importing into another database with different tablespaces? I have tried this and get this error:
ORA 959. It complained that the tablespace doesnt exist (which it doesnt). Is there a way I can change the export or import parameters to avoid this and just use the default tablespaces?
I may well be missing the point here so please feel free to tell me I am being a fool.
Thanks
Johan

Example. All these tables are from the same schema with the same tablespace specified in the dmp file. There are many more and 90 % fail but not all.
importing SCHEMA1 objects into SCHEMA2
IMP-00017: following statement failed with ORACLE error 959:
"CREATE TABLE "ACCOUNT_RPRT_NOT_TOBE_PUBLISH" ("O__NUM" CHAR(13) NOT NULL EN"
"ABLE, "O__ST" NUMBER(4, 0) NOT NULL ENABLE, "STEP_COUNTER" NUMBER(7, 0), "S"
"TATUS" NUMBER(1, 0), "RETRY_COUNTER" NUMBER(5, 0), "RESTART_COUNTER" NUMBER"
"(5, 0), "PID" NUMBER(3, 0), "OBJ_LOCK" VARCHAR2(10), "MYFILE" VARCHAR2(200)"
", "LONG_FIELD" CLOB, "LAST_SELECT_B_S" VARCHAR2(250), "LAST_SELECTION" VARC"
"HAR2(250), "L_EXECUTION_CTRL" CHAR(13), "ID" NUMBER(6, 0), "ERROR_COUNTER" "
"NUMBER(7, 0), "CREATION_TIME" NUMBER(5, 0), "CREATION_DATE" NUMBER(6, 0), ""
"COMPLETION_TIME" NUMBER(5, 0), "COMPLETION_DATE" NUMBER(6, 0), "COMMIT_COUN"
"TER" NUMBER(5, 0)) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 STORAGE(I"
"NITIAL 65536 FREELISTS 1 FREELIST GROUPS 1) TABLESPACE "AIA_DATA_T_256K" LO"
"GGING NOCOMPRESS LOB ("LONG_FIELD") STORE AS (TABLESPACE "AIA_DATA_T_256K""
" ENABLE STORAGE IN ROW CHUNK 8192 PCTVERSION 10 NOCACHE STORAGE(INITIAL 65"
"536 FREELISTS 1 FREELIST GROUPS 1))"
IMP-00003: ORACLE error 959 encountered
ORA-00959: tablespace 'AIA_DATA_T_256K' does not exist
. . importing table "ACTUARIAL_RPT_CNTR" 0 rows imported
. . importing table "ACTUARIAL_RPT_CVRG" 0 rows imported
. . importing table "ALIS_CANCEL_BILLING" 2799 rows imported

Why does EO always try to import the same three files?

Whenever I open Elements Organizer 12.1 it is attempting to import files. It always finds the same three files and then reports them already in the catalog. If I import files from my camera or card reader or folder, in addition to the files on the selected device it attempts to import the same three files that are already in the catalog. I have seen this message hundreds of times. How do I make it stop attempting to import these three files?
I have tried deleting the three files from the catalog. The first time I opened EO it found the three files and imported them. The next time I opened EO it attempted to import the same three files and reported them already in the catalog. Arrgh...
Steve

Yeah depends on the source but generally MPG hasn't ever been supported in Final Cut Pro- as Tom says you want to convert it to ProRes elsewhere before bringing into FCP X.

How to import tables, indexes, tablespace, etc from a DMP.

Hello,
I like to know how to import tables, indexes, tablespace, etc from an DMP export of a Oracle 10.2.0.1 to be apply on a Oracle 11.2.0. When I import the DMP file all the data is going to one single Tablespace, for example, Users tablespace.
On the original database we have various tablespace's each separated with different content (tables, indexes) and I like to know if it posible to import the same schema,tables, indexes, tablespace all made with one single DMP Export. I can't use DBUA because the software of the database on the 10.2 is missing, I have only a DMP file (24GB) of DMP!.
Thanks for the reply,
Sorry for my english :).
Regards.

thanks for that but is not what Im looking for.
Look, on my ORCL directory of the oracle 10.2 I have for example this:
CONTROL01.CTL
EXAMPLE01.DBF
REDO01-1.LOG
REDO01.LOG
REDO02-2.LOG
REDO02.LOG
REDO03-3.LOG
REDO03.LOG
RMAN.DBF
SYSAUX01.DBF
SYSTEM01.DBF
TEMP01.DBF
UNDOTBS01.DBF
USERS01.DBF
TABLESPACE1.ORA
TABLESPACE2.ORA
TABLESPACE3.ORA
TABLESPACE4.ORA
TABLESPACE5.ORA
I make a full export to a DMP. Then in my 11.2 version first I created the user then when import the DMP file none of the tablespace (TABLESPACE1, TABLESPACE2, ETC...) is created, all is going to the USERS tablespace, SO, im looking a way to tell imp command that generates the exactly tablespace structure that i was have on the 10.2.
Hope this can explain more my problem.
Thanks again!.

Jump cuts during a footage import

I got some jump cuts during a footage import (firewire) from a JVC camera (1280X720 HD): during import I saw short black frames; then I saw that, corresponding those point,s I had the jump cuts. It's quite strange, also because, on the camera monitor itself all seemed fine.
The camera owner today tried importing same footage on a pinnacle software on a windows pc and all was fine there...
What could it be the problem here?
P.S. A month ago I imported a footage (720X576, so simple DV) from the same camera and all was fine

Also, you might try a different camera or a deck, which might be more forgiving.
I'm in the midst of ingesting a lot of old mini DV tapes…sometimes finding for some tapes the deck won't read properly but a camera will…and for others, the exact opposite.
Russ

IPhoto 09 hangs up during analysing / converting iPhoto 2 Library

Hi
I recently bought a new MPB (OS X 10.6.1 / 3.06GHz / 8GB RAM).
I restored / copied the user data from the old Mac Book (OS X 10.4.11 / PowerPC G4 1.33GHz / 1.5GB RAM) to the new MPB. Now I have got a problem with my photos which I manage on both systems with iPhoto.
*On the MPB iPhoto "V 8.1 (415)" blocks / hangs up during analysing / converting the old iPhoto Library "iPhoto V2.0.1 (3E89)"*
Old iPhoto Library: ca. 8000 Photos, ca. 23GB
What did I do:
- from my backup of the old system I moved / copied the folder "iPhoto Library" to the new MPB into the folder "Pictures"
- I started iPhoto
- I selected the "iPhoto Library" as the Medithek
- iPhoto started to verify and to update / convert the Mediathek
- shortly after iPhoto is blocked / hangs up
I have absolutely no idea why this happens.
Questions:
How do I get my entire iPhoto 02 Library working with the new iPhoto?
Did anybody have the same / a similar problem and how was it solved?
Is there any way to copy manually the old Library into the new packetised iPhoto Library (if yes - what do I need to do)?
Do I need to copy any other files (e.g. preferences) to the MBP so that iPhoto does the conversion of the old Library correctly?
Any hints / solutions are very welcome.
Looking foreward to get my photos back to work with the new MPB.
Thanks guinevra

This can be cause by a damaged file or a dodgy file permission somewhere in this Library.
Download BatchMod from
http://macchampion.com/arbysoft/
And apply it to the iPhoto Library Folder using the settings found here:
http://homepage.mac.com/toad.hall/.Pictures/Forum/BatChmod.png
(Credit to Old Toad for this one).
and try again.
Regards
TD

Syscopy (during Unicode convertion): Import on same tablespace layout

Similar Messages

Maybe you are looking for