Sysdba's name and pwd

Does anybody know who is sysdba and sysdba's name and password?
I only know you can login this way: sqlplus system/pwd as
sysdba, does sysdba is a seperate user from system, sys or
internal?

SYSDBA and SYSOPER are not userids but privileges.
You should set up a password file using the password utility,
and setting the REMOTE_LOGIN_PASSWORD_FILE=EXCLUSIVE. You
should then be able to grant SYSOPER and SYSDBA privileges to
other users.
To see the list of privileged users:
SELECT * FROM v$pwfile_users
I am not sure if everybody can log on as SYSDBA until the
password file is set up.

Similar Messages

  • Creating Adaptive RFC model without logon name and pwd?

    Hi All,
    I have this requirement where when I log on to an application I need to get a mapped user name and pwd from EP and then connect to the R/3 system.
    However, you cannot create a Adaptive RFC model without username and password. So i needed to know if this can be done in some other way.
    Thanks,
    Malita

    hi
      To my  understading , you need  user and pwd created  for your portal and  call the RFC or Bapi .
      Hope this is possible . 
      Creating  the  users and pwd for the portal  for  your application  is possible , but parallelly
      calling the RFC with same user name and pwd  i hope its not , as you have to deploy the application
      which created the userid and pwd , then call the RFC ,
       and for more you can provide more information what exactly is your requirement .

  • What's the Name and PWD in JCO Creation ?

    Hello All,
            I want to create a JCo Connection.
    These are the steps which I've followed :-
    1. Logged on to the Portal with username and PWD.
    2. Went to the WebDynpro Tab.
    3. Clicked on Create JCo Connection
    4. Entered the details :-
                    NAME : Test_Meta_Data
                    Client :   800
    <b>Note: I gave the client number of the SAP backend system . Is it right ?</b>
    5. J2EE Cluster : I have only one server in the DropDown and it's already selected.
    So I choosed the next step.
    6. Connection Type : DICTIONARY META DATA
    7. Application Server Connection :-
                  Message Server : Only one server I have in the DropDown and so I selected that.
    8. Security :
            Use Method   : USER / PASSWORD
            Name            : sapuser
            PWD             : server
           Confirm PWD  : server
           SNC               : OFF
    9. Finish.
    When I press Finish I'm getting a message :-
    " failed to create a new JCo Connection Test_Meta_Data
    Error while obtaining JCo Connection. "
    Can any one help me in resolving this ?
    Regards,
    Deepu:k

    Hi Deepu,
    Firstly,
    Yes, The details u enter while creating JCO connection are for the SAP system,
    So <i>Client, UserName, Password</i> are for SAP system(Backend) you are creating JCO for.
    Secondly, About the error u r getting,
    Error says " failed to create a new JCo Connection Test_Meta_Data"
    that means the SLD user has not sufficient authorization to create JCO.
    In Visual Administrator, in <b>SLD Data Supplier</b>
    You would have given SLD connection settings, there you have to give the user which has sufficient authorization<i>(Admin authorizations)</i> to create JCO connection..
    Check the current user given in <b>SLD Data Supplier</b>.
    Hopefully your problem will be solved.
    Regards
    Deepak

  • What is the default user name and password for oracle databse 10g

    Hi: gurus, I just recently installed the oracle 10g personal edition and trying to log on to the enterprise manger, but can't figure it out the user name and password, can some one help me and tell me what is the default user name and password to logon to the oracle instance. BTW during the installation I choose two passowrds one for the schema and one for the global database orcl. I wonder will I be using one of these passwords. Still I don't have any clue for the "User Name".
    thanks

    system/manager and sys/change_on_install are still valid default passwords when database is manually created. If DBCA was used, passwords will be those defined at creation time inside DBCA.
    In case passwords have been forgotten, those can be reset:
    From an OS commnad prompt, set ORACLE_SID, ORACLE_HOME and PATH environment variables, just to make sure you are pointing to the right Oracle Home installation, and issue:
    OS> sqlplus / as sysdba
    SQL> alter user sys identified by yourNewSysPassword;
    SQL> alter user system identified by yourNewSystemPassword;
    And you're done with it.
    HR Madrid

  • User name and password for Oracle BI Spreadsheet Add-in

    Dear all,
    I downloaded Oracle Database 10g Express Edition and I installed it successfully. I created a new account. Then I downloaded Oracle Business Intelligence Spreadsheet Add-in and I installed it successfully as well (both on my PC).
    Now I would like to run Oracle Business Intelligence Spreadsheet Add-in but I don't know the way of running it. I click "New query". Then I go to the "Connection editor". There are four boxes.
    "Description box" is clear. I write 127.0.0.1 or k219 (it's the name of my computer) into the "Host name box". As the "Port Number box" I use 1521. Then I write xe into the "SID box".
    Then I return to the "OLAP connection tab". There are items: user name and password. I try to write user name and password created in Oracle Database 10g Express Edition. And the result is an error: Faild to connect to OLAP service
    BIB-10701 An error occured during connecting to metadata
    oracle.dss.metadataManager.common.MetadataManagerException: BIB-10701 An error occured during connecting to the database
    oracle.dss.connection.common.ConnectionException: BIB-16627 It's not possible to connect to the databse
    java.sql.SQLException: ORA-06550: line 1, column 13:
    PLS-00201: identifier 'OLAPIBOOTSTRAP' must be declared
    ORA-06550: line 1, column 7:
    PL/SQL: Statement ignored
    Please, is there anyone who can help me?
    Your user Frank

    When u install Oracle 10g, it forces u to enter new passwords for System as well as scott user and it does not allow u to keep old know passwords as manager and tiger.
    If u installed with new passwords successfully, u must be knowing those new passwords and there is no reason to try with system/manager. Instead try to connect with new passwords. We never faced such problems.
    If the problems still persits, check that
    a) Oracle service is running
    b) Instance is running by and whether u are able to connect / as sysdba
    Suresh Bansal

  • Recovering user name and password in Oracle 10g

    Hi
    Longback I installed oracle databse 10g on my windows xp box. Now I can't remember the user name and password to log in to the database using the Database control login page. The only thing I did at that time is activation of scott account. I am able to connect to databse with scott/tiger in SQL*plus. So how to I recover the username and password here. Any help please
    Regards
    Srinivas

    Hi
    Thanks a lot for your reply. I am new to Oracle.What I need here is how to Log in to the database from "Oracle database control" Login page. I forgot the user name and password. I think I need to select the SYSDBA option in that page. Just curious to know how to recover the username and password for SYSdba. When I try to log using scott and tiger it is saying that I don't have sufficient admin privileges to login. Is reinstall the only way out to get the user ID and passowrd.
    Regards
    Srinivas

  • Oracle e business suite user name and password to login oracle bi?

    Hi,
    it is possible to use oracle e bussiness suite user name and password to login oracle BI PUBLISHER SERVER.??
    we are using 11.1.1.6.0 OBIEE and R12 (12.0.6) e business suite.

    SAURAV KUMAR SINGH wrote:
    During Oracle Installation i have given SID : RD1 & Password :admin@1234
    ... insert BUZZER sound here ...
    Using "@" in a password for a DB User is not supported at all (allthough it works).
    I did so myself once and I think it was possible to get a connection utilize quotes,
    but I do not remember which ones in what way.
    Could have been like
    sqlplus "sapsr3/admin@1234"
    but not very sure any more.
    My be toy around with this, but more easy is to use brtools and change the
    password to contain only valid oracle letters.
    The problem with "@" is, that it delimits the SQLNET Connect identifier.
    Volker
    Oh, and for executing brtools, do not provide a user at all or only "-u /"
    This should do a sysdba connect.
    Edited by: Volker Borowski on Jan 30, 2012 7:25 PM

  • Wht is default User name  and password for the J2ee server

    Hi , All
    I had downloaded JSC for evaluation to get to creator hero ....
    After Complete Instalation I had started PointBase then start default Server Domain1
    when I try to start the deploy tool for that wht is username and password 'coz while installing server it doesn't ask me for user name and password for domain1......
    even same in apllication server .... username ==?? and pwd =??
    help me out...
    Thanks in adv..
    --Sudhir                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    user admin
    password adminadmin

  • Need user name and password to install on new computer...

    I just switched from PC to Apple, and when I try to install my Contribute 2.0, I'm being asked for a User Name and Password. Unfortunately, I'm not aware of what the user name and password might be. How can I get them so that I can complete the installation process? Your help is greatly appreciated.
    Thanks!

    SAURAV KUMAR SINGH wrote:
    During Oracle Installation i have given SID : RD1 & Password :admin@1234
    ... insert BUZZER sound here ...
    Using "@" in a password for a DB User is not supported at all (allthough it works).
    I did so myself once and I think it was possible to get a connection utilize quotes,
    but I do not remember which ones in what way.
    Could have been like
    sqlplus "sapsr3/admin@1234"
    but not very sure any more.
    My be toy around with this, but more easy is to use brtools and change the
    password to contain only valid oracle letters.
    The problem with "@" is, that it delimits the SQLNET Connect identifier.
    Volker
    Oh, and for executing brtools, do not provide a user at all or only "-u /"
    This should do a sysdba connect.
    Edited by: Volker Borowski on Jan 30, 2012 7:25 PM

  • Could not connect to DbaaS Service using the given user name and password.

    I'm not able to create Java Cloud Service (Oracle Java Cloud - Virtual Image Services) for my newly created Oracle Database Cloud Service instance. It fails with
    "Incorrect values entered
    Could not connect to DbaaS Service using the given user name and password.
    Verify that the user name and password are correct and the user name has SYSDBA privileges."
    I'm using SYSTEM user and the password I used during Oracle Database Cloud Service instance creation. I've verified them with sqlplus and also by connecting remotely.
    Java Cloud Service wizard doesn't allow me to proceed to instance creation.

    Hi Alexander,
    Maybe you'll find useful the document from Oracle docs specified bellow regarding Creating an Oracle Java Cloud Instance:
    http://docs.oracle.com/cloud/latest/jcs_gs/JSCUG/GUID-31F00F2C-221F-4069-8E8A-EE48BFEC53A2.htm#JSCUG3128
    Thanks,
    Cristiana.
    #OracleCloud

  • XDB user name and password

    Hi everyone I running apex 4.2 against oracle 12c database.
    I have imported an application and install it into my workspace.
    Anytime I tried to run the application , I get this pop up to login  for  XDB  user name and password .
    I have tried all the admin user name and password I can think of during my apex installation . Nothing seems to work.
    I want to disable this authentication so that it doesnt appear agian.  Please I need help.
    Can anyone be of help. Thank.s

    Hi DBENG,
    DBENG wrote:
    Hi everyone I running apex 4.2 against oracle 12c database.
    I have imported an application and install it into my workspace.
    Anytime I tried to run the application , I get this pop up to login  for  XDB  user name and password .
    I have tried all the admin user name and password I can think of during my apex installation . Nothing seems to work.
    I want to disable this authentication so that it doesnt appear agian.  Please I need help.
        Please check the status of the users whether they are open:
    Login into SQL Plus with SYS user and SYSDBA privilege
    Check the status of the users:
    SELECT USERNAME
         , ACCOUNT_STATUS
      FROM DBA_USERS
    WHERE USERNAME IN ('ANONYMOUS','XDB');
        NOTE : If the account status is not OPEN then follow the next step to unlock the accounts.
    Unlock the locked/expired users with valid password:
    ALTER USER anonymous IDENTIFIED BY "password" ACCOUNT UNLOCK; 
    ALTER USER xdb IDENTIFIED BY "password" ACCOUNT UNLOCK; 
        NOTE : Replace "password" with a valid password.
        Also check whether the ANONYMOUS user has CREATE SESSION privilege. If not grant the privilege:
    GRANT CREATE SESSION TO ANONYMOUS;
         Refer :
    Getting Windows Security pop up for user name and password when trying to access APEX
    Re: Apex 4.2.6 Installation Windows Security Popup and HTTP 404 Not Found
        Hope this helps!
    Regards,
    Kiran

  • Help - Class name and descriptions for a function location.

    Hi Guys
    i have to write a report that displays the class and class descriptions for a function location. the user passes in either the function location(TPLNR) or the class name and  the report should display the the class characteristics and resp. values. Is there a FM that i coud use?
    please help.
    many thanks.
    seelan.

    sadiepu1 wrote:
    When I set up Words with Friends on my Fire it asked for my username and password which from a previous reply to my inquiry above stated that the S 3 doesn't store due to privacy issues. I have tried all my usual combinations of usernames and passwords and my Fire won't let me access the game as it keeps telling me that one or the other is not correct. I have deleted the app from my Fire and re-downloaded it but have the same error comes up. I have accessed the Words with Friends support both on my phone and their website but there is no live chat. I might have to take both to a Verizon store. Also, my Fire won't let me access the game without a correct username and password. To say that I am frustrated would be an understatement as well I have tried everything I can think of with no luck! Thanks for any help you can give!
    Did you use facebook to log in? 
    Verizon will not be able to help you retrieve any of the information you need.  You will have to contact Zynga.

  • I'm having trouble downloading an update to my MacBook Pro. It comes up with my husband's name even though the MacBook is registered under my name and I have my own ITunes acct.  how do I get his name off the ITunes update on my Mac

    I'm trying to download an automatic update from ITunes but when I click on "Update" it comes up with the message, "You have updates available for other accounts" an tells me to sign in to my husband's account, even though the MacBook is registered in my name and I have my own ITunes account.  My husband has his own MacBook and ITunes acct. How do I fix?

    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID.
    Apple ID FAQs
    http://support.apple.com/kb/HE37

  • Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when i enter account name and password for one account, i cannot access other accounts, because windows saves username

    Hi. I am using a time capsule for few PC s. I have made 5 different account to access time capsule. but in windows when I enter account name and password for one account, i cannot access other accounts, because windows saves username. how can i prevent this from happenning. I really need to access all my accounts and dont want it to save automaticlly.

    Why have 5 accounts if you need to access all of them.. just have one account?
    Sorry I cannot follow why you would even use the PC to control the Time Capsule. Apple have not kept the Windows version of the utility up to date.. so they keep making it harder and harder to run windows with apple routers.

  • Reading MS Project column names and data on the fly from a selected View

    Hi guys,
    I have several views on my project file (MSPROJECT 2010) and I want to build a macro so that;
    1. User can select any view ( Views can have diffrent columns and the user may add new columns as well)
    2. User runs the Macro and all the coulmns along with the tasks displayed in the view will be written to a excel file. ( I don't want to build several macro's for each view, I'm thinking of a common method which would work for any selected view)
    The problem I'm facing is that how will i read the column names and data for a particular view on the fly without hard coding them inside the vba code ?
    The solution needs to work on a master schedule as well.
    Appreciate your feedback.

    Just to get you started the following code writes the field name and data for the active task to the Immediate window.
    Sub CopyData()
    Dim fld As TableField
    For Each fld In ActiveProject.TaskTables(ActiveProject.CurrentTable).TableFields
    If fld.Field >= 0 Then
    Debug.Print Application.FieldConstantToFieldName(fld.Field), ActiveCell.Task.GetField(fld.Field)
    End If
    Next fld
    End Sub
    Rod Gill
    Author of the one and only Project VBA Book
    www.project-systems.co.nz

Maybe you are looking for