Sysdiagnose_2013.09.29_20-04-06-EDT.tar.gz
When I logged into my computer this monring I found finder open and the file above. It was located at macintosh HD>privateder>var>tmp. The private folder is grayed out and if I open a new finder window the private folder is not visible. Is this a file that should be there and do I need to be concerned about it?
Hello, not on 10.8 to be able to verify right now, but it looks kosher...
DESCRIPTION
sysdiagnose tool gathers system diagnostic information helpful in investigating system performance
issues. A great deal of information is harvested, spanning system state and configuration. sysdiagnose
needs to be run as root. sysdiagnose can be triggered upon pressing a special key chord; this is cur-rently currently
rently Control-Option-Command-Shift-Period.
https://developer.apple.com/library/mac/documentation/Darwin/Reference/ManPages/ man1/sysdiagnose.1.html
Might you, somebody, or some animal hit that key combo?
Similar Messages
-
Sysdiagnose_2013.03.12_06-47-47-PDT.tar.gz?
what is this sysdiagnose_2013.03.12_06-47-47-PDT.tar.gz with an associated file labled Launchd with a red negative icon at the bottom? This just popped up on my MacBook Pro while I am at a hostel full of internationals.... worried it may be a hack..
This just started happening on my iMac, and I know I didn't run any diagnostic programs. Why would it just randomly happen?
-
Hi there,
Ever since I upgraded to Mavericks, and installed my standard software, I'm getting some odd behaviour.
Every so often (no discernable pattern so far) my Finder pops up with a new window in /private/var/tmp. There is a huge system stacktrace printed out in a file with the following format: "
sysdiagnose_2013.10.30_19-53-16-MDT_9956.tar.gz
There are a ton of files in there, so I have no idea how to figure out what is crashing and causing it. I get no "system crash message" to go along with it.
$ la
total 51592
drwxr-x--- 55 brandon staff 1870 Nov 2 12:23 ./
drwxrwxrwt 10 root wheel 340 Nov 2 12:23 ../
drwxr-xr-x@ 4 brandon staff 136 Oct 31 05:50 Brandons MacBook.mdsdiagnostic/
drwxr-xr-x 7 brandon staff 238 Nov 2 12:23 DiagnosticMessages/
drwxr-xr-x 10 brandon staff 340 Oct 31 05:50 SystemConfiguration/
-rw-r--r-- 1 brandon staff 343 Oct 31 05:50 airport_info.txt
-rw-r--r-- 1 brandon staff 24735 Oct 31 05:50 apsd-status.txt
-rw-r--r-- 1 brandon staff 3623 Oct 31 05:50 bc_stats.txt
-rw-r--r-- 1 brandon staff 838 Oct 31 05:50 bootstamps.txt
drwxr-xr-x 29 brandon staff 986 Nov 2 12:23 crashes_and_spins/
-rw-r--r-- 1 brandon staff 888 Oct 31 05:50 dig-results.txt
-rw-r--r-- 1 brandon staff 368 Oct 31 05:50 disks.txt
-rw-r--r-- 1 brandon staff 5034 Oct 31 05:50 diskutil.txt
-rw-r--r-- 1 brandon staff 1339 Oct 31 05:50 error_log.txt
-rw-r--r-- 1 brandon staff 312320 Oct 31 05:50 footprint.fpdata
-rw-r--r-- 1 brandon staff 6671 Oct 31 05:50 footprint.txt
-rw-r--r-- 1 brandon staff 1635003 Oct 31 05:49 fs_usage.txt
-rw-r--r-- 1 brandon staff 11583 Oct 31 05:50 fsck_hfs_user.log
-rw-r--r-- 1 brandon staff 24176 Oct 30 23:45 fsck_hfs_var.log
-rw-r--r-- 1 brandon staff 1112 Oct 31 05:50 gpt.txt
-rw-r--r-- 1 brandon staff 2317 Oct 31 05:50 ifconfig.txt
drwxr-xr-x 8 brandon staff 272 Oct 31 05:50 ioreg/
-rw-r--r-- 1 brandon staff 556 Oct 31 05:50 ipconfig.txt
-rw-r--r-- 1 brandon staff 12945 Oct 31 05:50 kextstat.txt
drwxr-xr-x 22 brandon staff 748 Nov 2 12:23 logs/
-rw-r--r-- 1 brandon staff 84574 Oct 31 05:50 lsappinfo.txt
-rw-r--r-- 1 brandon staff 1003463 Oct 31 05:50 lsof.txt
-rw-r--r-- 1 brandon staff 948932 Oct 31 05:50 lsregister.txt
-rw-r--r-- 1 brandon staff 2603456 Oct 31 05:50 microstackshots
-rw-r--r-- 1 brandon staff 12050663 Oct 31 05:50 microstackshots_lastday.txt
-rw-r--r-- 1 brandon staff 1701106 Oct 31 05:50 microstackshots_lasthour.txt
-rw-r--r-- 1 brandon staff 133219 Oct 31 05:50 microstackshots_lastminute.txt
-rw-r--r-- 1 brandon staff 195 Oct 31 05:50 mount.txt
drwxr-xr-x 8 brandon staff 272 Oct 31 05:50 netstat/
-rw-r--r-- 1 brandon staff 0 Oct 31 05:50 nfsstat.txt
-rw-r--r-- 1 brandon staff 22642 Oct 31 05:50 odutil.txt
-rw-r--r-- 1 brandon staff 189162 Oct 31 05:50 pmset_everything.txt
-rw-r--r-- 1 brandon staff 119937 Oct 31 05:50 powermetrics.txt
-rw-r--r-- 1 brandon staff 39115 Oct 31 05:49 ps.txt
-rw-r--r-- 1 brandon staff 130781 Oct 31 05:49 ps_thread.txt
-rw-r--r-- 1 brandon staff 143 Oct 31 05:50 reachability-info.txt
-rw-r--r-- 1 brandon staff 305 Oct 31 05:11 resolv.conf
-rw-r--r-- 1 brandon staff 1409 Oct 31 05:50 scutil.txt
-rw-r--r-- 1 brandon staff 8942 Oct 31 05:49 smcDiagnose.txt
-rw-r--r-- 1 brandon staff 3027018 Oct 31 05:49 spindump.txt
-rw-r--r-- 1 brandon staff 514781 Oct 31 05:50 stackshot-last-sym.log
-rw-r--r-- 1 brandon staff 31697 Oct 31 05:50 sysctl.txt
-rw-r--r-- 1 brandon staff 31827 Oct 31 05:50 sysdiagnose.log
-rw-r--r-- 1 brandon staff 64463 Oct 31 05:50 system_profiler.spx
-rw-r--r-- 1 brandon staff 953612 Oct 31 05:49 taskinfo.txt
-rw-r--r-- 1 brandon staff 395179 Oct 31 05:49 top.txt
-rw-r--r-- 1 brandon staff 305 Oct 31 05:11 var_run_resolv.conf
-rw-r--r-- 1 brandon staff 10930 Oct 31 05:49 vm_stat.txt
-rw-r--r-- 1 brandon staff 169255 Oct 31 05:50 vmmap-38738.txt
-rw-r--r-- 1 brandon staff 25105 Oct 31 05:50 zprint.txt
Any help you could provide would be appreciated!When pressing Cmd-Opt-Ctrl-Shift-Period, 'sysdiagnose' is triggered. It takes a few minutes to complete. When ready, the output will automatically be revealed in a Finder window.
-
Problem description:
Computer very slow….and unresponsive
EtreCheck version: 2.1.8 (121)
Report generated April 16, 2015 at 10:19:42 AM EDT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2012) (Technical Specifications)
MacBook Pro - model: MacBookPro9,1
1 2.3 GHz Intel Core i7 CPU: 4-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 412
Video Information: ℹ️
Intel HD Graphics 4000
NVIDIA GeForce GT 650M - VRAM: 512 MB
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.2 (14C1514) - Time since boot: 7 days 18:4:45
Disk Information: ℹ️
APPLE HDD HTS547550A9E384 disk0 : (500.11 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / : 498.88 GB (299.54 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Western Digital My Passport 0748 500.07 GB
EFI (disk3s1) <not mounted> : 210 MB
My Passport (disk3s2) /Volumes/My Passport : 499.73 GB (126.16 GB free)
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.quark.driver.Tether (1.1.0d4 - SDK 10.4) [Click for support]
[loaded] com.quark.driver.Tether64 (1.1.0d3 - SDK 10.6) [Click for support]
[not loaded] com.wdc.driver.1394HP (1.0.11 - SDK 10.4) [Click for support]
[not loaded] com.wdc.driver.1394_64HP (1.0.1 - SDK 10.6) [Click for support]
[not loaded] com.wdc.driver.USBHP (1.0.11) [Click for support]
[loaded] com.wdc.driver.USB_64HP (1.0.0 - SDK 10.6) [Click for support]
Problem System Launch Agents: ℹ️
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.gamed.plist
[killed] com.apple.Maps.pushdaemon.plist
[killed] com.apple.printtool.agent.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
6 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.awdd.plist
[killed] com.apple.ctkd.plist
[killed] com.apple.emond.aslmanager.plist
[killed] com.apple.nehelper.plist
[killed] com.apple.wdhelper.plist
[killed] com.apple.xpc.smd.plist
6 processes killed due to memory pressure
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.coupons.coupond.plist [Click for support]
[running] com.mcafee.menulet.plist [Click for support]
[running] com.mcafee.reporter.plist [Click for support]
[running] com.oracle.java.Java-Updater.plist [Click for support]
[loaded] org.macosforge.xquartz.startx.plist [Click for support]
Launch Daemons: ℹ️
[failed] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Click for support]
[unknown] com.mcafee.ssm.ScanFactory.plist [Click for support]
[unknown] com.mcafee.ssm.ScanManager.plist [Click for support]
[running] com.mcafee.virusscan.fmpd.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[loaded] org.macosforge.xquartz.privileged_startx.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.facebook.videochat.[redacted].plist [Click for support]
[failed] com.facebook.videochat.[redacted].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
WDSecurityHelper UNKNOWN (missing value)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
WDDriveUtilityHelper UNKNOWN (missing value)
WDDriveUtilityHelper Application (/Applications/WD Drive Utilities.app/Contents/WDDriveUtilityHelper.app)
Internet Plug-ins: ℹ️
SiteAdvisor: Version: 2.0 - SDK 10.1 [Click for support]
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
CouponPrinter-FireFox_v2: Version: 5.0.3 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.8 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 31 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Click for support]
Stamps.com: Version: 1.1.13 [Click for support]
DISH Anywhere Player: Version: 2.7.2.0 [Click for support]
Safari Extensions: ℹ️
SiteAdvisor
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: ON
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 498.88 GB Disk used: 199.33 GB
Destinations:
My Passport [Local]
Total size: 499.73 GB
Total number of backups: 29
Oldest backup: 2013-05-17 22:06:43 +0000
Last backup: 2015-03-27 16:16:56 +0000
Size of backup disk: Too small
Backup size 499.73 GB < (Disk used 199.33 GB X 3)
Top Processes by CPU: ℹ️
6% backupd
5% WindowServer
1% Google Chrome
1% loginwindow
1% mtmd
Top Processes by Memory: ℹ️
289 MB Google Chrome Helper
189 MB Google Chrome
84 MB backupd
78 MB Mail
77 MB Finder
Virtual Memory Information: ℹ️
17 MB Free RAM
1.22 GB Active RAM
1.22 GB Inactive RAM
996 MB Wired RAM
54.55 GB Page-ins
1.93 GB Page-outs
Diagnostics Information: ℹ️
Apr 14, 2015, 03:11:54 PM /Library/Logs/DiagnosticReports/softwareupdated_2015-04-14-151154_[redacted].cp u_resource.diag [Click for details]When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the log extract, you might see an error message on the web page: "You have included content in your post that is not permitted," or "The message contains invalid characters." That's a bug in the forum software. Please post the text on Pastebin, then post a link here to the page you created. -
Possible to migrate installation w/ SLD to new system using 'tar'/'untar'?
I have a CRM installation with TREX, that I need to move from one unix system to another (same patch level). As SLD is setup, can I 'tar' the entire installation on the old system, 'untar' the bundle on the new system, and bring the SAP setup back into function mode? It should be doable if SLD is not setup. But since there is SLD bundled in the setup, I am not sure if 'tar' is the way to port the installation. I can give the new system the same hostname, but ip address would be different. Any pointer is highly appreciated! Many Thanks!
Hi,
You can perform asystem copy, even SLD can be set up later accroding to your need.
Regards,
Vamshi. -
How do I view thej2sdk-1_3_1-src.tar
I downloaded the file, I unzipped it and I have this large folder that has 11,521 files in it--I cant view or copy any file except by double clicking on it and then it opens the a new developer window with the source for this file in its code window--I cant open a file from any of the java developers I have on my machine--Oracle 9i is what I want to load it into, but I can use borland's jbuilder if necessary
I'm sure it's just that I don't understand what a .tar file is and how it should be used, so any help is appreciated
thanks,
JeffThe tar file are meant for Linux, Unix OS. "tar" stands for Tape ARchive. These are compressed files like zip files. In short :
tar - The GNU version of the tar archiving utility
DESCRIPTION
This manual page documents the GNU version of tar, an
archiving program designed to store and extract files from
an archive file known as a tarfile. A tarfile may be made
on a tape drive, however, it is also common to write a
tarfile to a normal file. The first argument to tar must
be one of the options: Acdrtux, followed by any optional
functions. The final arguments to tar are the names of
the files or directories which should be archived. The use
of a directory name always implies that the subdirectories
below should be included in the archive.
To view the contents of the tar file, give the following command:
tar tvf j2sdk-1_3_1-src.tar
To extract the contents of the tar file, give the following command:
tar xvf j2sdk-1_3_1-src.tar
i hope this information will help you. -
LMS 3.2 - Backup-Error -- ERROR(908): Cannot create or back up tar file
Hello again,
with performing backup (LMS 3.2 on Solaris 9) the following errors will arise.
dbbackup.log
/opt/CSCOpx/bin/tar: Removing leading `/' from absolute path names in the archive Apps file : /opt/CSCOpx/backup/manifest/upm/upminfo/datafiles.txt
[Tue Dec 8 08:56:54 2009] Archiving the contents of the following directories into /enbw/backup/files/cw_db_backup/0/upm/filebackup.tar
[Tue Dec 8 08:56:54 2009] /opt/CSCOpx/hum/conf/upm-snmp.properties
/opt/CSCOpx/hum/thresholdscript /opt/CSCOpx/MDC/tomcat/webapps/upm/reports
/opt/CSCOpx/MDC/tomcat/webapps/upm/WEB-INF/classes/com/cisco/nm/upm/properti
es/common/UPM.properties
/opt/CSCOpx/bin/tar: Removing leading `/' from absolute path names in the archive
/opt/CSCOpx/bin/tar: Cannot add file
/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/virt32841308_657_658_-718594975:
No such file or directory
/opt/CSCOpx/bin/tar: Cannot add file
/opt/CSCOpx/MDC/tomcat/webapps/upm/reports/virt32841308_658_659_1465769167:
No such file or directory
/opt/CSCOpx/bin/tar: Error exit delayed from previous errors [Tue Dec 8 09:07:30 2009] ERROR(908): Cannot create or back up tar file. Backup cancelled. Verify that you have write-access to this directory. [Tue Dec 8 09:07:30 2009] Backup failed: 2009/12/08 09:07:40 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Is seems to be problem related to maximal filesize handling of GNUtar implemented in CW2000.
The problem is with tar'ing HUM-Reports in /opt/CSCOpx/MDC/tomcat/webapps/upm/reports, and with reaching
tarfile-size of 2,9GByte error is thrown.
</exxx/backup/files/cw_db_backup/0/upm># ls -lh
total 6126448
-rw-r----- 1 casuser casusers 2.9G Dec 8 09:07 filebackup.tar
</exxx/backup/files/cw_db_backup/0/upm># ls -al
total 6126452
drwxr-x--- 2 casuser casusers 512 Dec 7 14:30 .
drwxr-x--- 11 casuser casusers 512 Dec 7 14:30 ..
-rw-r----- 1 casuser casusers 3135201280 Dec 8 09:07 filebackup.tar
GNUtar-Version
# /opt/CSCOpx/bin/tar --version
tar (GNU tar) 1.13
Copyright (C) 1988, 92,93,94,95,96,97,98, 1999 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
Written by John Gilmore and Jay Fenlason.
Is this a know problem?
Thanks for any thoughts.
Best Regards
LotharHi Joe,
thanks for your feedback.
These files to be tarred aren't there directly after backup stops with error.
It seems that some process stores data about reports in that file and when trying to
pack these reports via tar they are delete by any cleanup method.
Does this help.
P.S. Backup usually takes about more than 1hour -
Error ,opening a tar file created by TarOutputStream
Iam trying to create a tar file using TarOutputStream with the code below :
try {
TarOutputStream tout = new TarOutputStream(out);
for (int i = 0; i < files.length; i++) {
if (files.getPath() == null) {
continue;
File f = new File(wsdir, files[i].getPath());
if (!f.exists()) {
continue;
TarEntry te = new TarEntry(files[i].getPath());
size += f.length();
te.setSize(size);
tout.putNextEntry(te);
try {
FileInputStream in = null;
try {
in = new FileInputStream(f);
byte buf[] = new byte[1024];
int n;
while ((n = in.read(buf)) > 0) {
tout.write(buf, 0, n);
} finally {
if (in != null) {
in.close();
} catch (IOException e) {
e.printStackTrace();
tout.close();
} catch (IOException e) {
e.printStackTrace();
return false;
The above code succcessfully creates the tar file but while opening the tar file Iam getting the error - Error reading header after processing 1 enriesI created a zip file by providing the relative paths
of the files using the java.util.zip package.I
downloaded it through a web application.It was
downloaded successfully and the zip file is showing
100 kb.When i tried opening zip file from windowsXP
SP2 and i am not able to view or extract the
contents.It says 'Windows has blocked access to these
files to help protect your computer'. Go and complain to Microsoft. It's a Windows XP SP2 security feature. Read the manual or help about how to deal with it. It's not a Java problem. -
[solved] Can no longer untar AUR packages with tar xvf /directory/
For about a year now I've used this line of code from my .bash_aliases file to untar files from their source directory to the one I am currently CDed in at that moment:
alias tarx='tar xvf' # extracts files from a tarball using tar [e]x[tract] v[erbose] f[orced]
This alias failed to work a few weeks ago for some unknown reason and now spits out this error:
tarx /media/aur/srcpackages/atom-editor.tar.gz ./
tar: .: Not found in archive
tar: Exiting with failure status due to previous errors
Why on earth would this suddenly stop working. I haven't changed my .bashrc file apart from some small comments but here it is in case I'm totally out of it:
# ~/.bashrc
# This file is sourced by all *interactive* bash shells on startup, #
# including some apparently interactive shells such as scp and rcp #
# that can't tolerate any output. So make sure this doesn't display #
# anything or bad things will happen ! #
# If not running interactively, don't do anything #
[[ $- != *i* ]] && return
# If the connection to the system is a remote connection 'ssh' will be #
## appended to the prompt. Otherwise the prompt will be displayed normally #
# See: remote.colourful.prompt_how-to on /media/lynwyn/networking/ssh #
# Default prompt from the above-named document: #
# export PS1='\[\e[0;31m\]\u@\h:\w${text}$\[\e[m\]' # # #
if [ -n "$SSH_CLIENT" ]; then text=":ssh:"
fi
# Alias definitions.
# You may want to put all your additions into a separate file like
# ~/.bash_aliases, instead of adding them here directly.
# See /usr/share/doc/bash-doc/examples in the bash-doc package.
if [ -f ~/.bash_aliases ]; then
. ~/.bash_aliases
fi
### [User Prompts]
### White Yunzi
export PS1='\[\e[0;37m\]: \[\e[1;92m\]\W\[\e[0;37m\] :\[\e[m\] \[\e[0;37m\]'
#### Silver Yunzi
#export PS1='\[\e[0;37m\]: \[\e[1;94m\]\W\[\e[0;37m\] :\[\e[m\] \[\e[0;37m\]'
### Pink Yunzi
#export PS1='\[\e[0;37m\]: \[\e[1;95m\]\W\[\e[0;37m\] :\[\e[m\] \[\e[1;95m\]'
### [Root Prompts]
### White Yunzi Root
#export PS1='\[\e[1;37m\]:\[\e[1;92m\]\u\[\e[1;37m\]:\[\e[1;92m\]\W\[\e[1;37m\]:\[\e[m\] \[\e[0;37m\]'
### Silver Yunzi Root
#export PS1='\[\e[0;37m\]:\[\e[1;94m\]\u\[\e[0;37m\]:\[\e[1;94m\]\W\[\e[0;37m\]:\[\e[m\]\[\e[0;37m\]'
### Pink Yunzi Root
#export PS1='\[\e[0;37m\]:\[\e[1;95m\]\u\[\e[0;37m\]:\[\e[1;95m\]\W\[\e[0;37m\]:\[\e[m\] \[\e[0;37\]'
### * BASH options * ###
### Last edited January 2014 by H.L.
# Bash won't get SIGWINCH if another process is in the foreground.
# Enable checkwinsize so that bash will check the terminal size when
# it regains control.
# [check the window size after each command and, if necessary,
# update the values of LINES and COLUMNS.]
# http://cnswww.cns.cwru.edu/~chet/bash/FAQ (E11)
shopt -s checkwinsize
# automatically prepend cd when entering just a path in the shell
shopt -s autocd
# Enable history appending instead of overwriting.
shopt -s histappend
# for setting history length see HISTSIZE and HISTFILESIZE in bash(1)
HISTSIZE=10000
HISTFILESIZE=20000
## erase duplicate entries in your history file
## and force Bash History to ignorespace
export HISTCONTROL=erasedups:ignorespace
# set variable identifying the chroot you work in (used in the prompt below)
#if [ -z "$arch_chroot" ] && [ -r /etc/arch_chroot ]; then
# debian_chroot=$(cat /etc/arch_chroot)
#fi
# make "less" more friendly for non-text input files, see lesspipe(1)
[ -x /usr/bin/lesspipe ] && eval "$(SHELL=/bin/sh lesspipe)"
# TMUX
# Put this this snippet BEFORE the aliases in .bashrc.
# This code starts TMUX with only one session (unless you start some manually), on login;
# it will try to attach to a currently running session.
# If there isn't a currently running session then TMUX will create one.
# if which tmux 2>&1 >/dev/null; then
# if not inside a tmux session, and if no session is started start a new session
# test -z "$TMUX" && (tmux attach || tmux new-session)
# fi
# environment variables using gedit and nano
export EDITOR="$(if [[ -n $DISPLAY ]]; then echo 'gedit'; else echo 'nano'; fi)"
### Coloured man pages with explanations of colours in comments
# Note to self: all of the colour & escape statements work ONLY by using double quote marks, e.g. " ... "
## Coloured man pages with explanations of colours in comments
# 67: Primary colour for program names is Dark Green [old 80's CRT green!]
# 68: Optional arguments and/or separate options for arguments is Bright Green
# 69: Text Reset
# 70: Text Reset
# 71: man page info bottom of page is Dark Red on Black background (net effect is transparent background with red writing)
# 72: Text Reset
# 73: References to other programs (and their respective man page(s)) are Bright Yellow [good neutral yellow]
man() {
env LESS_TERMCAP_mb=$(printf "\e[1;31m") \
LESS_TERMCAP_md=$(printf "\e[1;31m") \
LESS_TERMCAP_me=$(printf "\e[0m") \
LESS_TERMCAP_se=$(printf "\e[0m") \
LESS_TERMCAP_so=$(printf "\e[1;44;33m") \
LESS_TERMCAP_ue=$(printf "\e[0m") \
LESS_TERMCAP_us=$(printf "\e[1;32m") \
man "$@"
## To get a skin of your choice loaded instead of mc's default
## skin, you might consider the following solution:
## Multi-User: Create an alias for mc in your ~/.bashrc, like:
if [ $TERM = "screen-256color" ]; then
if [ $USER = "root" ]; then
myMCSkin="modarcon16root-defbg"
else
myMCSkin="modarcon16-defbg"
fi
alias mc='mc --skin $myMCSkin'
alias mcedit="mcedit --skin $myMCSkin"
alias mcview="mcview --skin $myMCSkin"
alias mcdiff="mcdiff --skin $myMCSkin"
fi
Last edited by MoonSwan (2014-07-09 04:31:06)I seem to have a larger problem on my desktop machine. When I try to untar stuff on that one it creates a .cache directory for some weird reason and populates it with, I think, cached files from my home directory. It ends up having firefox, mc and other cached files in the new directory and then tar just errors out with:
gzip: stdin: unexpected end of file
tar: Unexpected EOF in archive
tar: Unexpected EOF in archive
tar: Error is not recoverable: exiting now
Very odd behaviour and I'm assuming some config file somewhere is responsible for this behaviour. But where else can I look apart from .bashrc?
@ids1024, I'll do what you've what you suggested on my netbook later today and record the information to post afterward.
[edit] Here are the contents of that .cache directory, if it helps:
dconf event-sound-cache.tdb.silver_yunzi.x86_64-unknown-linux-gnu event-sound-cache.tdb.tengen.x86_64-unknown-linux-gnu fontconfig mc dmenu_run
event-sound-cache.tdb.silveryunzi.x86_64-unknown-linux-gnu event-sound-cache.tdb.white_yunzi.x86_64-unknown-linux-gnu gstreamer-1.0 mozilla
Last edited by MoonSwan (2014-06-28 19:57:10) -
Backup many tar files in the same tape
hi all
i have many small geoframe projects of size,,around 3,,,5 GB but the lower tape contain 24 GB availble space..
===> I WOULD BACKUP ALL THE SMALL PROJECTS UNDER THE SAME TAPE...
for example i have three project (proj1,proj2,proj3)
the problem is when i write these line for backuo these projects together then the tape is rewind even i use 0n option!!!!! :
$ mt -f /dev/rmt/0 rewind
$tar cvf /dev/rmt/0n proj1
$mt -f /dev/rmt/0 rewind
$mt /dev/rmt/0n fsf 1
$tar /dev/rmt/0n proj2
$mt -f /dev/rmt/0 rewind
$mt /dev/rmt/0n fsf 2
$tar /dev/rmt/0n proj3
===> logically, i should find the 3 project inside the tape (proj1,proj2 and proj3),,,but i always find the latest single project when i use the tar command for list the content of the tape:
$tar tvf /dev/rmt/0n
proj3
if someone know what's wrong whith this operation please don't hesitate to give me the solution
thanks in advanceBefore running the tar, run 'mt -f <device> status' You should see that for later runs, your tape is not on file 0/block 0
Also, you're doing it the complex way. Don't rewind/forward between each one. Just always use the no-rewind device and leave the tape in place.
mt -f <tape> rewind
tar cf <tape> proj1
mt -f <tape> status # verify not at beginning of tape
tar cf <tape> proj2
[etc]
If you use the rewind device, then when you run 'status', you'll see the tape is at the beginning.
Try again, but this time show the status just before running the final tar to tape, and show the status just before gathering the contents of the tape.
Darren -
Data transfer of BP with Vendor details using the EDT tool - BP_XDT - KCLJ
Hi All,
I'm trying to use the EDT tool with transfer type 15 to upload a BP into R3 with Vendor details. I've successfully created the BP and Vendor, however I was looking to extend the migration to include purchase org data, unfortunately I couldnu2019t see any of the LFM1 type fields on the BUS_DI structure.
Has anyone used this tool to upload this kind of data? If so how did you do it?
Also I've seen a OSS note 510095 which talks about how to extend the structures used by the tool, however this always seems to cause a short dump. Has anyone applied the instructions and had a successful outcome? Once again if you've done this could you please share your experience?
Kind Regards,
Hiten Mistry.Hi
I am having the same problem. how did you eventually resolve this?
christopher -
Hi,We ate creating a tar file every nigth with all the essbase apps, all directories etc. Then we are ftping the tar file from production failover machine. Then I am doing tar -xvf file name.All driectories are getting created etc. When I goto app manager I am not seeing the apps.Please Advise.Thanks,Minash...
Have you created the apps/databases in Essbase yet? In addition to copying the files over, you still need to create the apps/databases.
-
I downloaded and installed Firefox 4 RC using tar.bz2 so that I could still use Firefox 3.6.15 as per normal, having to start Firefox 4 using the terminal which worked great (except for many videos on different websites). When Firefox 4 was released, I suppose I was in a hurry to get it to work normal from my menu, but it kept saying that 3.6.15 was the latest version (I'll be quite embarrassed if it wasn't available for Linux users - I do love Firefox!). I did something silly, like purge Firefox from my operating system (Kubuntu 10.10) and when I reinstalled it was still 3.6.15 (it wasn't really downloading, but unpacking). Am I in too much of a hurry or is there a fix-it? I can use Firefox 4, but only through the terminal and I suspect it is slower than it should be. I would like only one version now.
First, that cannot be an iBook G4 as that machine cannot run Snow Leopard let alone Mountain Lion. To run Snow Leopard it has to be an Intel processor, not a G4. What does it show as the Model Identifier in About This Mac, More Info, System Report, Hardware, Model Identifier?
Second, if you have erased the hard drive there should not be remnants of any prior content. Even though Disk Warrior is saying nothing is wrong with the hard drive, it sounds as though there are problems. You may want to consider simply replacing the hard drive so there are no questions about faults. A good source is OWC, http://www.macsales.com where they also have on-line videos showing how to do the replacement.
Third, you could also try again to restart using the Snow Leopard DVD/CD and use Disk Utility on that install disk to erase again, and do it a couple times, then try to install. If it continues to refuse, then it sounds as though there is a fault with the hard drive. -
What is a .tar backup file and can I delete it?
I'm cleaning up files on my iMac and noticed a file in my Documents folder (where I keep applications installation files) that is called "backup-fri-feb-08-15_42_35-2013.tar". This file is over 7 gb so I would like to remove it but I can't find anywhere what it is. I found a wiki page that explains that .tar files are old Unix format but what do I need it for and what program created it?
I use an external drive but I use Carbon Copy Cloner instead of Time Machine and I have TM turned off. I'm wondering if it is a backup file from a program I don't even use any longer. I also use Parallels for 2 Windows programs and I'm finding that some of the Windows programs create backups of stuff I don't need or use. Sounds like it would be safe to delete it.
Thanks so much. -
Any info about EDT (External Data transfer)
Hi,
I am working in insurance module of SAP. There is a business object called Business Partner which we need to migrate from legacy to R/3.
Now for migration of Business partner generally LSMW is not used. People here use EDT (External data transfer).
Does some one know about EDT as data transfer tools ?
Regards,
Rajesh.Hi Rajesh,
Please check this EDT online document.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CADATA/CADATA.pdf
Hope this will help.
Regards,
Ferry Lianto
Please reward points if helpful.
Maybe you are looking for
-
IPhone with Exchange contacts will not sync to Laptop
A user at our company has an iPhone that syncs with our Exchange server just fine. He just purchased a Mac Book and cannot get his contacts to sync through iTunes. It will sync any contacts that he has directly on the phone, but not any that are from
-
Can we catch the dynamic item value in Apex?
Hi All, In my application i am using SELECT_LIST_FROM_QUERY_XL Function. The select list will be populated based on some product group id. Some times the list will be 2 or 5 based on prgr id. Now how to catch the dynamic list item name. Is it possibl
-
Entering payment cards information in sales order
Hi Folks, I am uploading the payment cards information in sales order using transaction VA02. I need to check if there is an already existing payment card in order to know the line number to enter the new card information. I know that FPLTC table has
-
Storage location missing in Inbound delivery
Hi , When I am getting the ASN or confirmation for my purchase order. automatically Inbound delivery is getting created. But here the problem is missing the storage location in inbound delivery. I maintained the storage location determination (with s
-
How to uncompress .kgb files on a Mac?
Is is even possible?