Sysfail errors in the queues

Dear experts,
I established middleware settings between CRM 2007 and ECC i getting errors in the queues.
with displaying status sysfail in both the queues .
http://s657.photobucket.com/albums/uu298/vallabhaneni/?action=view&current=smq1errors.jpg
http://s657.photobucket.com/albums/uu298/vallabhaneni/?action=view&current=smq2errors.jpg
Regards
V.Srinivas

Hi,
SMOF_ERPSH is the table where you will have to maintain your R/3 system details. Any download of data from r/3 will refer to this table to get the R/3 details and check whether the R/3 is correct or not. Please maintain a proper entry in this table.
Now how do make an entry in SMOF_ERPSH is as soon as you create a site in smoeac under R/3 you will get an entry in this table.
Thanks & Regards
Abishek

Similar Messages

SYSFAIL error in Inbound Queue

Hi,
I got a SYSFAIL error in the Inbound queue. When I double clicked on it, it showed up the Status text as "An exception occurred that was not caught". This has been raised on 14-01-2009 (today's) date and when i checked for the B-Doc corresponding to this, i couldn't find out any entry for this.
Initially i tried unlocking the queue and thereby re-processing it, but it failed again.
The details are:
Function Module : BAPI_CRM_SAVE
Queue name : R3AD_SALESDO0004700954
Date : 14-01-2009.
Any pointers on this would be of great help.
Thanks in advance
Rasmi.

1. Check in Tx: ST22 (ABAP Runtime Error). That would give you more insight in the cause of exception / dump and how to solve it.
2. Also, in parallel check whether the connection to ERP is established and the RFC call is getting connected (Tx: SM59).
3. If the error/exception/dump is occuring on ERP side, check whether CRM server details are maintained in table: CRMRFCPAR (on ERP side).
4. Check whether internal user exit is coded to catch the exception and throw out appropriate error.
5. check whether there is any code error in mapping module (available in table SMOFSUBTAB).
These steps might be useful to find out your problem.
Best Regards,
Pravin..

Messages stuck in the queue... how do I make them to be processed again?

Hi,
I'm new to SAP PI and kinda confused with queues.
I have file -> bpm -> file scenario and there was an error in mapping within bpm process.
When I went to qRFC Monitor (smq2), I see that in XBQO$PE_WS90000002 queue,
there's an error, 'Permanent error in BPE inbound processing'... which is expected.
Now, I run the interface scenario again several times but they don't get processed
but stuck in the same queue. At this stage, I didn't know what to do...
I thought by deleting the error message, other messages will be processed...
I deleted the error message but the other messages are still in the queue...
I have two questoins.
1. What is the best way to handle an error in the queue... can I just delete it? or is there a better way to handle an error in the queue?
2. After deleting the queue, what should I do to make the other messages to be processed again...
Thank you.
-Won

Hi Won,
There are programs for restarting the LUW entries:
programs
· RSARFCRD: tRFC Monitor (transaction SM58)
· RSARFCSE: Restart an LUW (background job)
· RSARFCEX: Restart tRFC LUWs (background job)
· RSQOWKEX: Restart QOUT qRFC LUWs
· RSQIWKEX: Restart QIN qRFC LUWs
· RSARFCSE: Delete an LUW (background job)
· RSARFCER: Delete various LUWs
Also, check the url:
http://help.sap.com/saphelp_nw04/helpdata/en/25/bcfa40badbf46fe10000000a1550b0/content.htm
Hope this helps.
Regards,
Sushama

Inbound-Queue SYSFAIL: SQL error in the database when accessing a table

Hi,
we send around 80 IDoc simultaneously, there 15 are stuck.
They all have SYSFAIL in SMQ2 with message: SQL error in the database when accessing a table
I already unlocked the queues and try to resend. Nothing happend!
I ran RSQIWKEX for the single queus but now there are new queues in Status SYSFAIL.
I already checked some entries in forum and blogs, but nothing worked out yet!
Can someone help?! it's urgent!!
br

Hi, well as mentioned i searched and found this already.
But in ST22 i got error concerning
Laufzeitfehler DBIF_RSQL_SQL_ERROR
Ausnahme CX_SY_OPEN_SQL_DB
So i guess it's something more serious.
Any more ideas?!
Can i simply delete the stucked queues and reporcess them?!
br

SMQ2: SYSFAIL Comparison error during the execution of a simple

Hi folks, I have an operation mapping interface determination with exactly 1 target message of occurence 0..1, that means the mapping output can be nothing for some input messages, that means a target message is not produced so that the output looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<Messages><Message1/></Messages>
In services builder the test finishes successfully when no output message is produced. Also in integration builder i can test the configuration and it works without errors.
But in runtime the message status is set to "Recorded for Outbound Processing" in SXI_MONITOR and the queue status of the message to "Message has errors". The message stops in SMQ2 with "SYSFAIL" as status and statusText "Comparison error during the execution of a simple" (truncated).
Anybody experienced the same? How has the output of an operation mapping to look like when no target message is produced?
I also tested with an output like this when no target is produced, but this results in System error "Split mapping created no messages" in SXI_MONITOR:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:Messages xmlns:ns0="http://sap.com/xi/XI/SplitAndMerge">
<ns0:Message1></ns0:Message1></ns0:Messages>
Thanks for your help, best regards, Martin

You seem to be having a multi-mapping involved.
The operation mapping has to produce at least the start and end tag.....even if the entire message is not present
Ex:
<SRC>
<First>
<Middle>
<Last>
</SRC>
If above is the structure, then it should be ensured that at least <SRC></SRC> is created by your mapping program....however in your case this is not happening....the tags that you see Messages and Message1 are due to the multi-mapping program and your message should be more than this.
if you say that occurence is 0..1 then what you can do is map this 0..1 node (root) with at least a blank Constant.
Unless you create a message (even though empty) you will continue to receive the error message.
Regards,
Abhishek.

I just installed Adobe CreatePDF desktop printer, when I try to use from Word or Excel, it does not work. The Adobe print queue says "error" in the status screen. I have uninstalled and re-installed. Any ideas of what to do next?

I just installed Adobe CreatePDF desktop printer on a Windows 7 home PC. When I try to use from Word or EWxcel, it does not print. The Adobe print device queue reports an "error" in the status column.

Adobe retired this Feb 17, 2014.
This app sent content to and got content from the web based services of "CreatPDF" and "PDF Pack".
These are subscription services out in "the cloud". When the app was live you had to be online and signed into your account. The user forum for CreatePDF has a DOC that speaks to the app removal.
Be well...

User Executes Stored Procedure That Executes sp_send_dbmail; receives email but also gets error Cannot alter the queue 'ExternalMailQueue', because it does not exist or you do not have permission.

Using SQL Server 2012 SP1
I have a user that is submitting a procedure that uses sp_send_dbmail. I have also noticed that they have the following code in their procedure
DECLARE @rc INT
IF NOT EXISTS (SELECT * FROM msdb.sys.service_queues
WHERE name = N'ExternalMailQueue' AND is_receive_enabled = 1)
EXEC @rc = msdb.dbo.sysmail_start_sp
The user submits the procedure and she gets the email but she also gets the following error message:
Msg 15151, Level 16, State 1, Procedure sysmail_start_sp, Line 8
Cannot alter the queue 'ExternalMailQueue', because it does not exist or you do not have permission.
Mail (Id: 2402) queued.
(1 row(s) affected)
I have granted execute to sp_send_dbmail and sysmail_start_sp. I have also granted select to service_queues.
Does anyone have any solutions for the above error message?
lcerni

The contents of sysmail_start_sp is this:
CREATE PROCEDURE sysmail_start_sp
AS
SET NOCOUNT ON
DECLARE @rc INT
   DECLARE @localmessage nvarchar(255)
ALTER QUEUE ExternalMailQueue WITH STATUS = ON
SELECT @rc = @@ERROR
IF(@rc = 0)
BEGIN
ALTER QUEUE ExternalMailQueue WITH ACTIVATION (STATUS = ON);
   SET @localmessage = FORMATMESSAGE(14639, SUSER_SNAME())
   exec msdb.dbo.sysmail_logmailevent_sp @event_type=1, @description=@localmessage
END
RETURN @rc
The user get the error, because she does not have any permission on the queue in question. To be able to alter the queue, the following applies according to Books Online:
Permission for altering a queue defaults to the owner of the queue, members of the db_ddladmin or db_owner fixed database roles, and members of the sysadmin fixed server role.
Note that is would be db_ddladmin or db_owner in msdb. Now, supposedly the queue is already active, and in that case I think that it is sufficient that the user has VIEW DEFINITION on the view. This would permit her to see the row in sys.service_queues,
why there would be no need to call sysmail_start_sp.
Altertanively, change the check to:
DECLARE @isenabled bit
SELECT @isenabled = (SELECT is_receive_enabled FROM msdb.sys.service_queues
               WHERE name = N'ExternalMailQueue')
IF @isenabled = 0
   EXEC @rc = msdb.dbo.sysmail_start_sp
The idea here is that, if the user has no permission to read the information in the DMV, @isenabled will be NULL, and you just pray and hope that the queue is up and running.
I suspect that the reason this worked for you on SQL 2005 is that on that instance someone at some point in made all the required configurations for it to work, but all that is forgotten now. That happens to me too.
If you really want the user to be able to start the queue, I have some better ideas than adding her to a role, but I skip the details for now.
Erland Sommarskog, SQL Server MVP, [email protected]

When using DateTrans the order in the queue causes error

Hello,
I have a map that is mapping an IDOC into an XML document. The idoc contains a reference segment called Z1EDP1C. The segment contains 2 fields IDDAT (identifier) and BEZ40 (which stores any kind of data).
My mapping uses equalsS to compare IDDAT to a constant value of 026. When it finds that value it uses DateTrans to modify the date format and place it in the corresponding field on the XML document.
My problem occurrs when there are multiple Z1EDP1C segments. As long as 026 is the last Z1EDP1C segment there are no problems. But when another Z1EDP1C segment follows it will try to use DateTrans on the field. So when that field contains a string "-" then it causes a Parse Error because it cannot format "-" into a date. It will surpress this field properly but only if it can pass the DateTrans successfully.
How can I work around this error?
Thanks,
Matt

In the end I had to fix the issue with the IDOC. I would rather have been able to match up the fields in the contexts themselves but I could not find a way to make this work. I believe the best answer to this question was the suggestion to create my own UDF.
I am not convinced that is the only answer but I could not find another way.
Example:
PO
PO ITEM (1)
     Z1EDP1C
            IDDAT = 008
     Z1EDP1C
            IDDAT = 026
            BEZ40 = 01102010
     Z1EDP1C
            IDDAT = 001
            BEZ40 = -
   PO ITEM (2)
        Z1EDP1C
            IDDAT = 001
            BEZ40 = -
I have a mapping that looks for 008 and copies the BEZ40 to a field. Another one looks for 001 and copies the BEZ40 to another field. And finally I have a mapping that looks for 026 and then does a DateTrans before copying the results to another field (ShipDate).
With the above sample data the queue for the mapping Henrique suggested looks like this in the IfWithoutElse :
In:             In:                    Out:
008           01102010        Suppress
026           -                       -
001                                   Suppress
Then of course the mapping tries to DateTrans the - and fails.
I will close this thread with the solution being a custom UDF but I would be interested to hear of any other potential solutions.
Thanks,
Matt

Cannot reset the queue from import phase by DDIC_ACTIVATION error in SAINT

Dear All,
The add-on installation terminated during phase DDIC_ACTIVATION in SAINT.
I cannot reset the queue from import phase after import the SAPK-600AGINP3A and SAPK-60001INAFS.
How can I do to reset it ???
Please help
Thanks

> Table J_3ACSIZ could not be activated
> (E- J_3ACSIZ-ZZAUFMENG (combination reference table/field J_3ACSIZ-ZZME does not exist) )
> Table J_3APVAS could not be activated
> Table KOMP could not be activated
> (E- KOMP-ZZAUFMENG (combination reference table/field KOMP-ZZME does not exist) )
> Table J_3ACSIZ could not be activated
> (E- Table J_3ACSIZ does not exist )
You added apparently some fields to a table (ZZ*) and you did not maintain that modification when SPAM requested you to do so. Now the tables should be activated but the field is missing.
Markus

Error while activating queue XBTI*

Hi All,
When I triggered the message i have seen the message in Green Color in MONI.
there by i went to SMQ2 and have seen the message that is strucked in the queue XBTI0001.
After that i have deleted the queues from SMQ2 and De-registered the queues and Registered the queues again. in SXMB_ADM
There by i Activated the Queues in the same screen.
then i got the Error as Error while activating queue XBTI
What could be the problem with this activation
REgards

Hi Prateek,
That activation and all is working now,
but the problem is iam trying to restart the successfully processed messages in MONI through
this Blog
Michal Krawczyk's Blog
The specified item was not found.
Every thing has been followed as explained in the Blog.
I took the message ID of the Successfuly processed message from MONI and when i execute the report.
Each and every time The message is comming to MONI with GREEN Status .
Then if i goto SMQ2 , ther i can see the queu with the description saying that SYSFail
and if i manually trying to release the Queue means it is saying Running and immediately turning into the same SYSFail state
The queue is not at all getting Free.
This is the problem
Regards

SYSFAIL Error in SMQ2 - Transfer of material from R/3 to CRM

Hi,
We are using standard BDOC to transfer material from R/3 to CRM. BDOC Type is PRODUCT_MAT, Queue name is R3AD_MATERIA<Material No>.
There are some queues which are struck in SMQ2. There are no struck queues in R/3. The struck queue has the status SYSFAIL and when I double click, it shows Message - Error in Mapping (Details: transaction SMW01)
I checked transaction - SMW01. The queue name which is in SYSFAIL status is not coming up in SMW01.
I do not understand whereelse I can see the detailed error message.
This error does not occur for all articles.
As I don't have sufficient knowledge in CRM and BDOCs, any pointers regarding the issue will be very much helpful.
Thanks and Regards,
Lakshmi

Hi Lakshmi,
Please follow as below:
SMWP-Middleware Monitoring Cockpit- This transaction gathers a wide set of information about the status of the Middleware & Downloads in both the CRM system, the R/3. All statuses should normally be green but there may be some circumstances which stop this occurring. Expand the section Generation Information which refers to the generation of BDoc Types. Where ever you see error you can right click and Select Analysis Tool then right click and check the error.The log shows the error.
SMQ2- Select a Queue and select Display. Queues connected to R/3 start with a queue name of R3A/D.
Double click on the Status field i.e SYSFAIL. Reason will be shown.In your case it is u201CError in Mapping (Details: transaction SMW01)u201D. Then Continue and select a queue and select Display.You can see the Individual BDocs are beoing displayed.
SMW01- give Bdoc Type as " Product_mat". If it is not displaying then I request you to check if all the objects are generated properly.This may also happen if the objects are not properly generated.Use tx-Genstatus. That will give you a list of error objects to be generated.
Regards...
Arup

SYSFAIL Error in SMQ2

Hi All
I am trying to do an Initial Load on the Customizing Object DNL_CUST_BASIS5 to download the Country realted customizing settings from ECC 6.0 to CRM 2007.
The load failed with queue in SMQ2 in SYSFAIL state. The error is GUID_FOR_LOGSYS_CHANGED.
A few weeks earlier, I donwloaded the same object. I did not face any issues.
Thanks in advance
Best Regards
Ram Sushanth

Hi Ram,
Make sure you have same logical system name and GUID in below tables
     In ECC -
> CRMPRLS
     In CRM -
> CRMMLSGUID
   If GUID is not matching, delete the entry from table CRMMLSGUID and restart the load. Entry will create in the table CRMMLSGUID, when first initial load triggers. Below note specifies the same.
     Note 765018 - Problems with logical system during data exchange
NOTE: You should never do this in Production.
Regards,
Bhanu

SYSFAIL in qRFC Outbound Queues - You are not authorized to logon

Dear Guru's,
I am new to BASIS. During health check for my company, I came across T-Code SMQ1 and found many Queue Status "SYSFAIL". Error message "You are not authorized to logon to the target system (error code 0)".
The souce system:
SAP 7.0
Component: CRM 5.0
DB : MSSQL 7.0
Kernel: 700
The target system:
SAP 7.0
Component: SAP ECC 6.0
DB : MSSQL 7.0
Kernel: 700
Firstly,
1. I login to CRM Quality Assurance Client 600. Execute SMQ1. Enter the Queue Name. Below is what I found.
http://img.photobucket.com/albums/v347/albumster/SAP/001-SMQ1-SYSFAIL.jpg
2. Once I Choose the row, I found the below error.
http://img.photobucket.com/albums/v347/albumster/SAP/002-SMQ1-NotAuthorized.jpg
3. I thought its an authorization issue so enter T-Code PFCG and added user COLACOM to Role Z_TRUSTED_RFC and do a user comparison. To my surprise, He was already given the authorization before!
http://img.photobucket.com/albums/v347/albumster/SAP/003-SMQ1-GivenAuth.jpg
Please advise.
If you need more information, please let me which T-Code to use so I can capture a print screen.
Thank You,
Jacky

Ok you need the folowing options in your word document:
1 .Start Word without any EWA.
2. Menu Extras=>Makro=>Security
2.1 Register "security level"=> the last or 2nd last radiobutton
2.2 The other Register = Set Checkbox "...Visual Basic Project ..." =true.
Then it should be work...
/greetings nico
Edited by: Nico Effenberger on Jan 28, 2009 5:15 PM

XI Error : EXCEPTION_DURING_EXECUTE.Mapping Queue stopped

Hi All,
We are facing an issue when the mapping fails due to a use one as many function it fails the queue and Queue goes into state SYSFAIL. We see the error as XI Error : EXCEPTION_DURING_EXECUTE.Mapping Queue stopped
Is this expected ? Isnt the queue expected to work normally by just failing the message which would then appear in sxmb_moni?
Any help , pointers?
Regards,
Sathya

Hi Jyothi,
Sorry for not being clear.. I know what is causing the mapping error. its incorrect number of values in use one as many function as i Mentioned earlier.
I want to know is there a way to stop the queue from failing. Queue failure causes other messages which are coming from other interfaces to get blocked.
Ideally the messages in error should show up in sxmb_moni and queues should be processing normally. However in this case it does not happend.
Regards,
Sathya

XI Error ERROR_OBJECT.INTERNAL: Queue stopped

Hi All,
In our Integration system there are lot of ques stopped in SMQ2. When we checked the status is SYSFAIL and we are getting message as "XI Error ERROR_OBJECT.INTERNAL: Queue stopped"
Not sure how to solve this problem and what are the things that i should check.
"XI Error ERROR_OBJECT.INTERNAL: Queue stopped
Message no. SR053
In SM37 i can check that the job named "80144F3A76E71DDFAF9B420D2A9B8456" is created by user PISUPER and running and active since 86000 secs.
Can anyone help in this
Thanks

hi,
need to restart Queue..
->double click on Quue
->it will show you status of the Q....number of messages in the Q...
-> double-click on the number of entries
-> you will see a detailed report
-> double click on the first entry
-> you will see the message processing due to which the Q got blocked
-> on the toolbar above (in the same page) you will find the option of Restart...click it....select the tracing level as retain....
this will cause the message processing to restart and all the messages blocked in the Q will get processed....
please refer below blog:
Internal Server Error in PI 7.1
thanks,

Sysfail errors in the queues

Similar Messages

Maybe you are looking for