Sysfail queue: queue stopped
i have some scenarios runnnig in my system, some scenarios are failing due to queue STOP,
when i click the queue name from the MONI, it shows that three queues namely XBTI007, XBTI003, XBTI004 are in SYSFAIL status,
when i cllick those queues, i find some 1000 entries in each of the queue,
the topmost entry shows that qRFC SXMS_ASYNC_EXEC failed due to
reason: COMMIT/ROLLBACK error on "DEFAULT" database connection...
there are many scenarios getiing stuck but i could find that the a particular scenarios qRFC execution lead to the error,
but since all the scenarios are getting stuck ....
wat action can i take....
if i select the entry with sysfail status and activate the queue, will it hamper something...
will data loss happen??
pls help...its in production system
Dhar,
SMQ2 is for outbound queue and SMQ1 is inbound queue. If you are getting the messages into XI then check in SMQ1 for any errors in XI and if you are sending out from XI then see SMQ2. Check this help for some more information on this:
http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
Regards,
---Satish
Similar Messages
-
Queue Stopped, messages not getting processed
Hello Experts,
From the pst three days, my XI server is running slowly. All the messages are having the status green. When we check the queues, all the messages are stuck there and the error displayed is SYSFAIL (Queue stopped). If I try to execute the LUW manually it doesn't allow me giving the message "The queus is registered and therefore cannot be activated".
I have also tried deleting the entry and restarting the message again and then it goes to the same queue and gets stuck again. What should I do further?
Thanks,
MerrillyHi,
To be able to initiate processing of messages stuck in the queue, make sure to set following IS configuration parameter
MONITOR QRFC_RESTART_ALLOWED to value 1 in SXMB_ADM
Check this
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Regards
Seshagiri
Edited by: N V Seshagiri on Mar 19, 2008 9:07 AM -
Queue stopped in sxmb_moni
Hi,
I am getting the problem in sxmb_moni when the XML message goes from one integration process to SOAP adapter and a mapping is called.The queue status is Queue Stopped. When i click on that queue it shows status as SYSFAIL.When i double click on that queue again it shows Status Text
as "XI Error CLIENT_SEND_FAIL . INTERNAL :Queue Stoppe ".
And the trace for that message is
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Message Split According to Receiver List
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">CLIENT_SEND_FAILED</SAP:Code>
<SAP:P1>35</SAP:P1>
<SAP:P2>HTTPIO_ERROR_CUSTOM_MYSAPSSO-Fehlermeldung beim Senden der Daten.</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while sending by HTTP (error code: 35, error text: HTTPIO_ERROR_CUSTOM_MYSAPSSO-Fehlermeldung beim Senden der Daten.)</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
</SAP:Error>
Please help me with this issue...Queue Stopped
For your message processing in sxmb_moni...in the Qstatus column you will be seeing a red circle with stop written in it...
->double click it
->it will show you status of the Q....number of messages in the Q...
-> double-click on the number of entries
-> you will see a detailed report
-> double click on the first entry
-> you will see the message processing due to which the Q got blocked
-> on the toolbar above (in the same page) you will find the option of Restart...click it....select the tracing level as retain....
this will cause the message processing to restart and all the messages blocked in the Q will get processed....
Regards,
Abhishek. -
XI Error : EXCEPTION_DURING_EXECUTE.Mapping Queue stopped
Hi All,
We are facing an issue when the mapping fails due to a use one as many function it fails the queue and Queue goes into state SYSFAIL. We see the error as XI Error : EXCEPTION_DURING_EXECUTE.Mapping Queue stopped
Is this expected ? Isnt the queue expected to work normally by just failing the message which would then appear in sxmb_moni?
Any help , pointers?
Regards,
SathyaHi Jyothi,
Sorry for not being clear.. I know what is causing the mapping error. its incorrect number of values in use one as many function as i Mentioned earlier.
I want to know is there a way to stop the queue from failing. Queue failure causes other messages which are coming from other interfaces to get blocked.
Ideally the messages in error should show up in sxmb_moni and queues should be processing normally. However in this case it does not happend.
Regards,
Sathya -
XI Error ERROR_OBJECT.INTERNAL: Queue stopped
Hi All,
In our Integration system there are lot of ques stopped in SMQ2. When we checked the status is SYSFAIL and we are getting message as "XI Error ERROR_OBJECT.INTERNAL: Queue stopped"
Not sure how to solve this problem and what are the things that i should check.
"XI Error ERROR_OBJECT.INTERNAL: Queue stopped
Message no. SR053
In SM37 i can check that the job named "80144F3A76E71DDFAF9B420D2A9B8456" is created by user PISUPER and running and active since 86000 secs.
Can anyone help in this
Thankshi,
need to restart Queue..
->double click on Quue
->it will show you status of the Q....number of messages in the Q...
-> double-click on the number of entries
-> you will see a detailed report
-> double click on the first entry
-> you will see the message processing due to which the Q got blocked
-> on the toolbar above (in the same page) you will find the option of Restart...click it....select the tracing level as retain....
this will cause the message processing to restart and all the messages blocked in the Q will get processed....
please refer below blog:
Internal Server Error in PI 7.1
thanks, -
I am getting a "SYSFAIL" error which says "Queue stopped", I am just wondering should I be able to fix it? if so, how? or I have to ask Basis people to help to fix it?
Thanks you very much for your response.Go through this blog. They had a similar problem.
http://scn.sap.com/thread/1761380 Regards Veeru -
SXMB_MONI - queue stopped
Hi,
I am experiencing a problem with queues. After reading similar situation, i don't really know I to solve it.
The problem is the next:
Scenario: IDOC--> XI --> FTP
When the Idoc is received in XI, there are about 15 Mappings to execute. When I have a look to the SXMB_moni I see all the mapping are stopped. The Q.Status is with the stop signal, and when I position the curson over the signal, the next text is displayed : "Queve Stopped".
I've read several similar threads, but I can not understand the solution.
Could anyone explain me or give a good link in which I can hava a step by step guide of how to register the queue and/or how to solve this problem eventually.
Thanks in advance.HI,
Please see the below links
Queue status = "stopped"
Queues Stopping
queue status is stopped
Queue is stopped after restarting XI
Q.Status is "Queue stopped"
Queue Status is showing Stopped
Queue Stopped
Message waiting in queueu0085
Regards
Chilla..
<i>Points rewarded if it is useful..</i> -
Hi all,
We are facing an unusual problem.
We transported one IDoc to file scenario to another XI System .
The scenario contains one BPM.
Now the problem is that the IDoc is coming from R/3 Business System but not going to BPM. We couldn't find any errors in receiver determination.
In the "Monitor for processed XML messages" we can see
a. Flag is green.
b. Idoc is coming from R/3 to XI
c. Receiver / Receiver Service columns are blank.
<b>d. Q.Status : Queue stopped .</b>
e. Error Category / Error ID columns are blank.
When we place mouse over Q.Status it is showing that message contains errors. But we couldn't find the error as the same thing is working well in XI-Dev.
Can anyone help.
Thamks in Advance.
Chemmanz
Message was edited by: ChemmanzHi,
We created one File-BPM-File scenario.
Here also the File Adapter is picking the file but the message is not going to BPM.
In monitoring (SXMB_MONI) we cannot see only one step >Message is coming from File BS to XI, after that no receiver, no error - Only one thing Q. Status stopped.
Regards
Chemmanz. -
XI Error JCO_SYSTEM_FAILURE.MAPPING: Queue stopped
In SMQ2, i can see a queue stuck giving error:
XI Error JCO_SYSTEM_FAILURE.MAPPING: Queue stopped
when i click it...it leads me to a SXMB_MONI entry..
which corresponds to a IDOC to File scenario, where a message mapping fails giving the following error,
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>java.lang.OutOfMemoryError</SAP:P1>
<SAP:Stack>"SYSTEM FAILURE" during JCo call. java.lang.OutOfMemoryError</SAP:Stack>
<SAP:Retry>A</SAP:Retry>
If i try to reEXECUTE the LUW from SMQ2, it again shows the error.......
how can i solve the problem without delecting the queuehi ,
This error is coming because your message is very large or lots of large xsd files are uploaded in XI
you need to increase the memory used by JVM for your XI. How to increase the Memory ? for answer go to this blog.
/people/keerti.nayak/blog/2007/03/05/solving-145out-of-memory146-problem-150-using-jnlp
hope it will sovle the problem... -
Hi,
I have an integration process that sends a synchronous message (soap adapter) to a receiver system. After that the receiver system needs about 5 to 10 minutes to respond to the request. Sometimes this is no problem and the queue of outgoing messages resides in status running.
However most time the queue stops after some minutes and the only way to go on with processing is to manually unlock the queue in SMQ2.
Why does this happens? Is there a possibility to restart the queue automatically? Is there a timeout period in queue processing that can be inceased?
Thank you in advance,
DanielDear Daniel,
In synchronous scenarios running over PI, several communication components are involved where each may lead to a time-out. Such a time-out on one communication component causes the messaging scenario to fail as a whole.
Various components which may contribut for your queue to fail are:
Messaging System specific time out, SOAP sender channel time out, and your receiver Adapter time out property.
There are some pre defined values for them already set in our PI system and these needs to be changed to accomodate the failure case also.
To give you a lead, In NWA, Go to->Operation Management->Systems-> Start & Stop -> Java Services -> (Under Related Tasks) Java System Properties. Select your adapter type and under properties change the default time.
For Sender SOAP channel, add u2018Parameter Nameu2019 as: XI.Timeout and in u2018Parameter Valueu2019, give any value in milliseconds.
Warm Regards,
Anshul -
Integration Server Queues Stopping
Hi People,
We are doing a FCC scenario (.CSV to XML), with the content conversion parameters as follows:
Recordset Name: Recordset
Recordset Structure: DataTable1,1
Recordsets per message: 1
As it is clear from the configuration, <b>when the source file will contain multiple line items, XI will create multiple XML files, each containing data for a single line item.</b> My problem is, <b>whenever the source file contains a large number of line items, I see them being picked up (In SXMB_MONI), but the Integration Server inbound queues stop and they show a green flag in MONI with tooltip "Message Scheduled On the Outbound Side". I have to go to SMQ2 and manually activate the queues to release the blocked messages.</b> How to alleviate this problem..because it is really irksome to go and everytime manually activate the queues. Is there any report that can be scheduled so that it caueses the queues to activate automatically when they are blocked?
P.S: We can not change the design. Also, I have seen
<a href="/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically">Naveen Pandarangi's Blog On XI Message re-Scheduling</a>..but the report stated there is not working out for me!
Awaiting your expert views,
Thanks in anticipation,
Regards,
AmitabhaHi Shabarish,
I followed your instructions, but they did not work out for me...the problem still persists!
Regards,
Amitabha -
Print Queue stops jobs - help?
*One day I could print pdfs and the next I couldn't!*
I'm using Acrobat 7.0 Professional and everytime I try to print a pdf, from any programme, the Print Queue begins to print my file, it says opening Distiller and then the Print Queue stops, just like that! No reasons.
I have reinstalled Acrobat having first uninstalled it from the disc, this hasn't solved my problem.
I have repaired permissions, no solution here.
I have run Printer Setup Repair by Fixamac and that's not helped.
I have reset the printing system in Printer setup utility - still no help.
I have reinstalled the OS system from the original discs and still I cannot get the printer queue to print the job!
I have a Canon Pro 9000 printer and I can print perfectly well to that.
PLEASE can someone help me???
I've wasted half a day on this and have got nowhere.The log shows that the first process to have trouble is the backend (transport) process "pdf700", which is the PDF distiller installed by Adobe Acrobat 7. I believe the rest of the errors are related to this process failing.
You mentioned that you deleted Acrobat, however I believe that this file may not have been deleted, or overwritten with the new installation. So I would run the the Acrobat Uninstaller and then check if this file gets left behind. If it does, then you can try manually removing this file.
You can see that the file is located in /usr/libexec/cups/backend. You can use the Finder to navigate to the folder. With a Finder window open, select Go > Go to Folder and then type that path above. This will open the backend folder where you will see the pdf700 file. Now, before you can delete it, you will need to change ownership from system to your account. Do a Get Info on the file (Cmd I) and in the new window, expand 'Ownership and Permissions'. You will see you have read-only rights. If you expand Details, then you will see that System is the owner. Next to this is a lock. If you click this you will be prompted for the administrators account/password. After entering this, you can change the owner to your account and then close the Get Info window. Now you will be able to delete the pdf700 file.
With the file removed, you can install Acrobat 7.x again. Of course, if the uninstaller does remove this file, then everything I mentioned above won't be required and of no help. I then recommend you check the Acrobat forums on Adobe's web site to see if there is any fixes mentioned there... -
Inbound queue error"XI Error APPLICATION_ERROR.ABAP: Queue stopped"
Hi,
In SMQ2 ,we have received inbound queue error "XI Error APPLICATION_ERROR.ABAP: Queue stopped".When activate queue error is not going.So please advice.
Thanks,
PraveenHello Mr,
Have a look into SAP Notes: 824554, 906435, 783515, 910649, 706563.
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
To be more helpful, can you post here complete error log? -
Message Status as "Scheduled" and Queue Status "Queue Stopped".
Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena JohnHi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod. -
Message Status "Scheduled", Queue Status "Queue Stopped"
Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena JohnHi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod.
Maybe you are looking for
-
Purchase order MENGE and NETWR comming blank 2LIS_02_ACC
Hi All, I am using the 2LIS_02_ACC Accounts assignments extractor(ECC6) for my BI7 lodas, and have used the MENGE(QTY) and NETWR(PO val) key figures. Aparantly when extracting Purchase Orders with Invoicing plans(Automated job to push invoices), it r
-
I recently purchased a refurbed iMac with a 3.06 GHz Intel Core 2 Duo. It came with iMovie ver. 9.0.5 installed. I do allot with iMovie and iDVD and would like to get a camcorder to add movie clips. Does anyone have any suggestions for a reasonabl
-
Thanks, this Helped so much.
thanks to everyone on here. I was having all the same problems as most people. spent all week trying to get videos on. talked to apple probably like 6 times and they couldn't help me. found this site and answered all my questions and have had no more
-
Fnd_flex_workflow_api.start_generation
fnd_flex_workflow_api.start_generation(itemtype IN VARCHAR2, itemkey IN VARCHAR2, actid IN NUMBER, funcmode IN VARCHAR2, result OUT nocopy VARCHAR2) Can any one tell what these parameter ref
-
I really need to copy and paste as I am uploading content onto my website through an online user panel, I dont have the know how to start re-writing coding as the help message stated when I try to copy some text, is there a simple solution to this ev