Syslog automated action is not working

Hi,
I set the automated actions for EIGRP NBRCHANGE message ( DUAL-5-NBRCHANGE )
I would like to get email notifications from CW but it is not working. I've checked that syslog messages arrived to CW.
Other e-mail funtions ar working like DFM and RME job email notifications.
how can i troubleshoot what happened?
Regards,

What version of RME are you using? Make sure the message shows up in the RME syslog Standard Report. If the message isn't making it to the database, then it will definitely not trigger an automated action. Check your SMTP settings under Common Services > Server > Admin > System Preferences, and use a sniffer to capture tcp/25 traffic when one of these messages arrives to see if the SMTP server is accepting the email message.

Similar Messages

Syslog Automated Action

Hi,
LMS 4.2.3
The syslog automated action work if we send to one e-mail address the messages.
Once we set two email-adresses ( comma separeted ) in "send to field", the messages are not received.
Thanks

One of the logfiles that gives understandable messages mostly. :-)
Cheers,
Michel

Ciscoworks RME Syslog Automation Actions

I set up RME several years ago on our Ciscoworks several running LMS 3.2 to notify us on any BGP flaps via email notification.
I noticed the last couple maintenance period where we had perform Circuit work with our ISP's. We haven't received any emails....I verified those
routers are configured to send notifications in the Device Selector and even checked the router logs.
004161: Nov 20 05:04:52 EST: %BGP-5-ADJCHANGE: neighbor X.X.X.X Down BGP Notification sent
004162: Nov 20 05:04:52 EST: %BGP-3-NOTIFICATION: sent to neighbor X.X.X.X 4/0 (hold time expired) 0 bytes
The syslog collector status appears to be normal.....is there anything I need to do the fix this?

Hi,
Are you receiving any emails from your LMS server? If not, navigate to Common Services > Server > Admin > System Preferences to enter your SMTP settings.
Identifying the syslog message is one step but there are more.
AUTOMATED ACTIONS
Set Up
By default, Automated Actions are used to notify via email, using the `sampleEmailScript.pl` as the script to run. If you do not want to use this, you could write or use your own scripts to perform the action that you really want. In this case please note that we do not provide support for any custom scripts if the problem seems to be related to the script that you are using.
You still need the following settings:
1. Select Devices
In *RME > Tools > Syslog > Automated Actions* and click on create and select the devices that you wish to use.
2. Define Message Type
Please give a name to the Automated Action and then click on add to define a message type. In here, please specify the following values:
    Facility: BGP
    Sub-facility: *
    Severity: 5
    Mnemonic: ADJCHANGE
    Description: *
3. Select Automated Action
Select the default script or the script that you wish to use. Please note that this script must be located in the *CSCOpx/files/scripts/syslog* file and needs to have only write/execute permissions for casuser/Administrator in Windows.
This way when a message matching the above is generated, the Automated Action is triggered and this will run the script that you choose and do the commands that it has specified.
Here is an example:
If you verify that your setup is correctly configured then take a look at the smtp.log found under ../CSCOpx/log.
Thanks.

The "portable document format" icon is a Word 2010 icon, so selecting Adobe Reader as action does not work to display the PDF.

In the Applications tab -- Content Type -- the "portable document format" icon is a Word 2010 icon (not Adobe), so selecting Adobe Reader or preview in Firefox as action does not work to display the PDF. I can see this Applications difference because my other Firefox laptop has the Adobe icon, and I can view PDFs. Essentially, a PDF is coming in as a Word document -- and the computer tries to open it up as a Word file.
How do I get the correct PDF icon in the Applications list -- the same way it displays (and works) on my other laptop.

Adobe PDF Plug-In For Firefox and Netscape 10.1.7 ?
I think you need to add this to the list of applications and the action to take on the type of content. This can also be managed in the about:permissions page. [[Permissions Manager - Give certain websites the ability to store passwords, set cookies and more]]

Re: Action Buttons not working Peoplesoft HR9.1/PT8.52

Hi All,
I've seen lots of threads regarding Action Buttons not working Peoplesoft HR9.1/PT8.52.
May I know which patch to download?
Thanks

Hi,
Log on to Oracle Support and go to tab Patches & Updates, Choose PeopleTools and version 8.52. From the search results choose the highest tool patch, at the moment.
Updateid: 14285861 / PT 8.52.10 PRODUCT PATCH

Assigned F key to play an action does not work. Why? Using cs6 iMac and wireless key board

Assigned F key to play an action does not work to play the action on an image. When the F key is selected it seams to control computer attributes rather than the play action assigned in photoshop. Why? Using cs6 iMac and wireless key board.
Is this a possible preference setting in mac or is it a setting in cs6 photoshop ? Help and knowledge will be appreciated.

*** Moderator Action ***
This networking question has been moved from the Solaris 10 discussion space,
to the Solaris Networking discussion space, for closer topic alignment.
Whereas there may be IPV6 nuances specific to your Solaris 10 environment and to the hardware, this appears to be a discussion that may be more global in effect.

SSRS - Action: MailTo not working in Excel Export

Hello:
In my reports, I have a link that enables users to send me an email if they want to provide feedback. This is done by using a "mailto:" expression in Action.
If the user clicks on the link in IE, the link functions correctly and Outlook will open up with my email address, the Subject I've specified, etc.
However, if the user exports the report to Excel and then clicks on thel link, a "Reference is not valid" error message gets thrown. This is because the link automatically have
file:///tempFileLocation/fileName - appended to the beginning of the link. Therefore it becomes something like "file:///tempFileLocation/fileName - mailto:emailAddress?subject=subjectName"
etc.
Why is the file location automatically appended to the beginning when the url is "mailto:"? The other links will export and function correctly when exported to Excel. However, any link with "mailto:" Action
will not work when the report is exported to Excel. What is the fix for this?
Thank you in advance!

Hi yosedesh,
According to your description, you create an action to open Outlook email. The action works fine in IE, but after exporting the report to an Excel file, the action can’t work correctly.
In Reporting Services, when we create an expression and concatenate the ‘MailTo:’ to the beginning of the field for the “Go to URL” option, the hyperlink will be changed after Excel render automatically. The hyperlink will add the name of exported Excel
file at the beginning of the hyperlink like you mentioned. This is a by-design behavior. So in your scenario, if you want users to open outlook email via the hyperlink, you have to modify the hyperlink within the Excel file manually.
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Folder Actions will not work - tried everything

Recently Folder Actions simply stopped working on 10.6.4. They worked fine before then recently just stopped working.
I've tried everything I can think of, including:
1. completely removing enabling & disabling & enabling folder actions through the setup app.
2. trashing folder actions plist files in user domain and relaunching
3. disabling related launchd processes with lingon
4. trashing launch agents in user domain and also trying to unload them in terminal
5. trying to kill the folder actions dispatcher process in activity monitor (just relaunches, as it should)
6. emptying system caches including dyld shared cache using cocktail
7. doing most of the above and restarting
It's driving me nuts. Any other ideas?
here's some entries from syslog:
8/2/10 9:31:37 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 6 seconds
8/2/10 9:37:29 AM Folder Actions Setup[4403] * WARNING: Method selectedRowEnumerator in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
8/2/10 9:43:37 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.enabled[309]) Exited: Killed
8/2/10 9:46:23 AM [0x0-0x3a03a].com.apple.systemevents[360] com.apple.FolderActions.enabled: Already loaded
8/2/10 9:52:07 AM Folder Actions Setup[1083] * WARNING: Method selectedRowEnumerator in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
8/2/10 9:52:16 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 7 seconds
8/2/10 9:53:02 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 1 seconds
8/2/10 9:56:18 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 10 seconds
8/2/10 10:00:58 AM Folder Actions Setup[2190] * WARNING: Method selectedRowEnumerator in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
8/2/10 10:01:01 AM com.apple.FolderActions.enabled[2236] launchctl: Error unloading: com.apple.FolderActions.folders
8/2/10 10:01:30 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 10 seconds
8/2/10 10:01:42 AM com.apple.launchd.peruser.501[269] (com.apple.FolderActions.folders) Throttling respawn: Will start in 9 seconds
8/2/10 10:05:03 AM sudo[2622] lryter : TTY=ttys000 ; PWD=/Users/lryter ; USER=root ; COMMAND=/bin/launchctl unload -w /Users/lryter/Library/LaunchAgents/com.apple.FolderActions.enabled.plist
8/2/10 10:10:25 AM Folder Actions Setup[676] * WARNING: Method selectedRowEnumerator in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
8/2/10 10:10:27 AM com.apple.FolderActions.enabled[680] launchctl: Couldn't stat("/Users/lryter/Library/LaunchAgents/com.apple.FolderActions.folders.plist"): No such file or directory
8/2/10 10:10:27 AM com.apple.FolderActions.enabled[680] nothing found to unload
8/2/10 10:10:38 AM com.apple.launchd.peruser.501[268] (com.apple.FolderActions.folders) Throttling respawn: Will start in 8 seconds
8/2/10 10:13:17 AM sudo[943] lryter : TTY=ttys000 ; PWD=/Users/lryter ; USER=root ; COMMAND=/bin/launchctl unload -w /Users/lryter/Library/LaunchAgents/com.apple.FolderActions.enabled.plist
8/2/10 10:14:01 AM com.apple.launchd.peruser.501[268] (com.apple.FolderActions.folders) Throttling respawn: Will start in 4 seconds
8/2/10 10:14:14 AM com.apple.launchd.peruser.501[268] (com.apple.FolderActions.folders) Throttling respawn: Will start in 1 seconds

I finally go Folders Action to work, after being unable to use it even for a simple beep for years now.
Here is what I did:
1. Changed permissions to 755 for the following folder and two contained files (note that 775 didn't work for me)
~/Library/LaunchAgents/
~/Library/LaunchAgents/com.apple.FolderActions.enabled.plist
~/Library/LaunchAgents/com.apple.FolderActions.folders.plist
2. Changed the following lines within ~/Library/LaunchAgents/com.apple.FolderActions.enabled.plist (using TextWrangler)
from:
<key>OnDemand</key>
<false/>
to:
<key>OnDemand</key>
<true/>
Prior to the permissions changes within #1 above, the value of <true/> kept getting changed back to <false/> by something in the system... and though
there was improvement by the permissions changes, the following console message appeared until false was changed to true.
com.apple.FolderActions.enabled[4127] launchctl: Error unloading: com.apple.FolderActions.folders
At this point true is staying true, and not being changed by unknown forces to false, and the above message is not appearing.
3. The only other thing I did prior to #1 and #2 above, was to run the script (unsaved),
tell application "/System/Library/CoreServices/Folder Actions Dispatcher.app" to tick
This little tell line caused something to occur where my Folder Action surprised me and worked for the first time though it took about 30 seconds and was erratic,
sometimes performing, sometimes not, though if I would do move something into the folder to trigger the action that should occur, and did not occur, then at the point
running the above tell line or script would cause the action to occur.
4. At this point I don't fool with the tell line or script from #3, and it seems that systemevents has gotten involved, as well as launchd, and with my simple Folder Action script
I'm getting the folder action within 10 seconds compared to 30 to 45 if ever seconds.
5. This is still too early to tell if this is the wonder pill I've needed since Leopard, and now Snow Leopard (and maybe Tiger as well: I forget when I even tried Folder Actions).
There was a time when I moved things around, so that the items normally found in the former AppleScript folder, were placed elsewhere in subfolders, so I don't know if that lead to this...
because I could get Folder Actions to work on Macs in the Applestore, but not my own Mac. Watching the console messages was helpful. I don't think it's a big concern that
deprecated messages are found sometimes. That's a just a normal part of the constantly rebuilding of things that goes on. It's more like a reminder that we've got an upgraded
OEM part were going to start using, and the older part won't be available after such and such date, so program accordingly, and in the meantime drive.

LMS 4.2.5 Syslog/Automated Action/Config mgmt issue

LMS 4.2.5 on Windows
We use the server as it's own Syslog server. The Syslog collector status is fine. I see syslogs coming into the server. However, I just made some changes on a router so ran a syslog report on it, but nothing was returned. I Tested the Collector Subscription and everything was fine.
We also have Automated Actions configured on certain syslog messages (duplex mismatch for example). There is an AA configured to send my team e-mails when this event occurs. There was a device that had two days worth of syslog messages complaining about this issue. Yet, we only received about 10 e-mails from the LMS system on it.
Another issue is with Configuration Mgmt. I fixed the duplex mismatch listed above and went to check the config tree to see if or when something changed. The last config archive was pretty old and I know changes were made on the device since then. This tells me that the LMS server didn't get notified of the config change or it would have gone out and checked it.
The one thing in common on all of the above is Syslog messages. LMS will take actions based on receiving these messages and those actions don't seem to be firing.
Any ideas would be greatly appreciated.
Thanks,
Mike S.

To confirm if the device is sending the syslogs and they are being received by LMS server properly, check the $NMSROOT/log/syslog.log and see it has the syslog from the device.
Unless syslog is there on syslog.log, we don't expect LMS to react on any AA.
For configuration backup, try to sync the device config by initiating a manual job to update the latest configuration from device. Even if there is no Automated Action working, you should still have a reoccurring/scheduled job configured to archive configuration backup periodically.
Following is a document I created for Syslog troubleshooting :
Ciscoworks LMS : Syslog in a Nutshell!
-Thanks
Vinod
**Encourage Contributors. RATE Them.**

LMS4 Syslog automated action anomaly

LMS 4.2.1 on W2K8 R2
I just want to send an email for any sev 1 or 2 syslog messages received. I set up an automated action that looks like this:
Automated Action Summary
Name:
Critical Events Email
Devices:
State:
Enabled
Parameters:
TO=[email protected], SUB=LMS4 Syslog AA, TEXT=
Action Type:
Email
Messages:
*-*-1-*:* *-*-2-*:*
Yet I seem to be getting emails triggered by messages from ASA devices that are not severity 1 or 2, like:
%ASA-session-4-106023
%ASA-auth-3-109023
%ASA-auth-6-109001
Am I doing something wrong, or is there some sort of bug I am hitting? I can't believe that I am the first person to try this.
Thanks,
-Jeff

I do not know what exactly you have done so far but in your situation I would enable the following debugs:
open that file in a text editor
NMSROOT\MDC\tomcat\webapps\rme\WEB-INF\classes\com\cisco\nm\rmeng\csc\data\Collector.properties
and change the debug level from Info to Debug:
    DEBUG_LEVEL=DEBUG
also enable SyslogAnalyzer debugging here:
Admin > System > Debug Settings > Config and Image Management Debugging Settings
    Set Application Logging Levels >> SyslogAnalyzer (scroll down)
        set Syslog Analyzer and Syslog Analyzer User Interface from INFO to DEBUG
in a DOS box check the status of the following processes (the should be started) and restart them:
    pdshow SyslogAnalyzer SyslogCollector
    pdterm SyslogAnalyzer SyslogCollector
    pdexec SyslogAnalyzer SyslogCollector
    pdshow SyslogAnalyzer SyslogCollector
When the issue happens again check the following log files and post them on the forum:
    NMSROOT\log\SyslogCollector.log
    NMSROOT\log\AnalyzerDebug.log

The Create List Item workflow action does not work in document library with document template

My end goal is more complex but below is a basic example of the issue I’m having that just simply does not work.
I'm trying to use a site workflow to create an item in a document library that has a document template applied to it but the file that gets created by the workflow is corrupt and cannot be opened.
I created a document library and edited the document template by adding some text to the header and changing it to a Word docx file instead of a Word dotx file. I tested the document template by clicking the files tab in the ribbon and then clicking new
document which opens the document template in Word and allows me to edit and save the document back to SharePoint. Then I created a SharePoint 2013 site workflow in SharePoint Designer that contains a single Create List Item action, and that action creates
an item in the document library with the name field statically defined. I published the workflow and then manually start it on the site. The workflow completes successfully and when I navigate to the document library the document has been created by the workflow.
When I click on the document to open it in the Word Web App it throws the error pictured below and if I open it in the Word client application it just opens a blank document and not the correct document template.
I also tried using a SharePoint 2010 workflow with pretty much the same results. Opening the document in Word Web App gives the same error as above and opening the document in the Word client application gives the error pictured below.
Come on Microsoft creating a Word Document in a SharePoint Document Library from a SharePoint Workflow should just work! Is this a bug or does anyone have any ideas on what is causing the this issue?

I had the same problem with corrupted document - this worked for me:
1. Create a 2010 Workflow which creates the list element in a document library
(you may start this workflow from your 2013 workflow if applicable)
2. In the Create New List Item properties - make sure to set ContentTypeId to your content type
("Id for indholdstype" is Danish for "Contenttype ID")
3. Your Content Type template should be a ".docx" file - NOT a ".dotx" file...!
(I have always created my templates for content types as .dotx files - seems Microsoft wants us to use ordinary .docx files as template files for content types)
Hope this helps you!

Action link not working in Direct db request(OBIEE 11g)

Hi all ,
My Requirement.. is...
From direct db request .. i need to navigate to detail report and it should be display the results(detail report results) based on the value,which user click's on the summary report.
For the above requirement ..
I have done below steps..
Summary report(Direct db request) columns:
   Diet no,diet name
   a.I have created a action link on diet no column.
Detail report columns:
   Diet No ,Diet Name,Material Name
   a. I have set diet no as is prompted
when i click on the diet no value in summary report ,we are able to navigate to detail report but it's not filtered based upon diet no value , which i have clicked in summary report.
It is displaying all results(detail report).
Note: if both are normal reports(not direct db request) it's working fine.
If one of the report is direct db request..Action link is not working properly.
Is it action link working in direct db request.........or not
If any one having any ideas pls share me ..
Regards,
Bharath

Hi,
It's known bug. this issue fixed in 11.1.1.7.0 (coming soon).
bug 13852263 - ACTION LINKS - NAVIGATION TO BI REPORTS DOESN'T WORK ( OPEN IN NEW WINDOW)
for now : to uncheck the "Open in New Window" checkbox and go to the detail report in the same Window.
Note: this bug has been fixed by applying the patch 14003822 (u need to get the latest patch)
Thanks
Deva
Edited by: Devarasu R on Feb 14, 2013 4:05 PM

Custom Actions do not work if list is customized with InfoPath?

I am trying to add the display form ribbon custom action, or even the edit form ribbon action, but they do not work if I use a list that was customized in InfoPath?
they work fine on an out of the box list? I am able to do the list item menu actions, but the other ribbon commands are missing?Does InfoPath use a different layout that overwrites these commands?

Hi,
yes your custom actions disappears when you customize with infopath forms.
https://social.technet.microsoft.com/Forums/office/en-US/c6afbc48-90cc-4db0-9808-f181c121c7d1/custom-actions-and-infopath?forum=sharepointcustomizationprevious
https://social.technet.microsoft.com/Forums/office/en-US/2706e5b5-17f3-4d2e-982b-653277c749cd/custom-actions-icons-disappear-when-using-infopath-forms?forum=sharepointcustomizationprevious
Please remember to click 'Mark as Answer' on the answer if it helps you

Action is not working

Hi Floks,
Regarding BRF, I have created one rule set with two rules and action in CRM 7.0 environment for validation purpose while performing clicking respective event in UI. But this action is not getting executed. Please let me know how to approach and are there any mandatory steps take to consider.
regards,
Randheer

Hi,
in return "/faces/Home.jspx" if i give like this it works or not.
After checking the condition it should go to Home.jspx. but its not working.
Is it correct method or wrong. if wrong how should i go to Home.jspx
Thanks,
NR

Populating Text Field using Dynamic Actions is not working

I've a Select List (P14_ACCOUNT) and Text Field (P14_BILLING_ADDRESS_1) on a form. On selecting a value on the Select List, I've to populate the Text Fields by fetching its values from the database by using the Select List value as the primary key. To do this, I created a Dynamic Actions (Advanced) on the Select List, with event onchange and Set Value as SQL. However this is not working.
Below are the sqls of Select List and Dynamic Action respectively:
select ACCOUNT_NO || ' - ' || COMPANY_NAME display_value, ACCOUNT_ID return_value
from ACCOUNT
order by 1
select a.address1 from account a where a.account_id = :P14_ACCOUNTNow when I substitute the Dynamic Action sql with any of the below sqls, the value shows up:
select address1 from account where account_id = 41
select address1 from account where rownum=1
select user from dualI thought of seeing the value of :P14_ACCOUNT in session or debug, but session does not show any value and on clicking debug it throws a popup message "Debugging is not enabled for this application."
I've been trying since few hours but with no luck. How can I debug further?
Thanks for the help.
--Hozy

Hozy,
Take alook at your application on apex.oracle.com
The session state for items, when SQL is used, is set using the Page Items to Submit parameter as has been set in your application.
Regards,

Syslog automated action is not working

Similar Messages

Maybe you are looking for