Syslog Collector failure with third party SSL certificate
Hello,
We recently replaced our self-signed SSL certificates with certificates provided by our agency. After the change subscription attempts to the collector in [RME>Tools>Syslog>Syslog Collector Status] failed: SCLA0126: Could not subscribe to the Collector.
I believe the problem originates with the way the CSRs are handeled. An identification number rather than the actual FQDN must be provided in the common name field and this number is expected by the CA. A chain was built with multiple government CAs, and warnings received that the chain does not end in a trusted CA. My hands are bound by this policy - is there a way to make this work or any suggested workaround? Tried a DNS CNAME with the id number. No joy. I haven't tried renaming the host to the id number but I might if you think it might work and then will just cname the current hostname. We are running Solaris 10 systems. Here is the error from AnalyzerDebug.log:
javax.net.ssl.SSLHandshakeException: Received fatal alert: handshake_failure
at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:150)
at com.sun.net.ssl.internal.ssl.Alerts.getSSLException(Alerts.java:117)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.recvAlert(SSLSocketImpl.java:1584)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:866)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1030)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.readDataRecord(SSLSocketImpl.java:678)
at com.sun.net.ssl.internal.ssl.AppInputStream.read(AppInputStream.java:75)
at java.io.ObjectInputStream$PeekInputStream.read(ObjectInputStream.java:2213)
at java.io.ObjectInputStream$PeekInputStream.readFully(ObjectInputStream.java:2226)
at java.io.ObjectInputStream$BlockDataInputStream.readShort(ObjectInputStream.java:2694)
at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:761)
at java.io.ObjectInputStream.<init>(ObjectInputStream.java:277)
at com.cisco.nm.rmeng.fcss.common.FcssSyslogCollector.<init>(FcssSyslogCollector.java:95)
at com.cisco.nm.rmeng.sa.SyslogAnalyzerEngine.notifySubscribers(SyslogAnalyzerEngine.java:975)
at com.cisco.nm.rmeng.sa.SyslogAnalyzerEngine.start(SyslogAnalyzerEngine.java:1031)
at com.cisco.nm.rmeng.sa.SyslogAnalyzerService.main(SyslogAnalyzerService.java:55)
Thanks....!!!
= Uwe =
The subscriber list is empty because we could not add the subscription after the swapping the certs. Sorry, was asked to obscure the host names - it shows host name only not FQDN.
SyslogCollector - [Thread: main] INFO , 14 Feb 2010 10:37:33,198, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 14 Feb 2010 10:37:33,201, System Initialized.
SyslogCollector - [Thread: main] INFO , 14 Feb 2010 10:37:36,694, Service started...
SyslogCollector - [Thread: Thread-9] WARN , 14 Feb 2010 10:42:04,383, Unable to add monitor for
SyslogCollector - [Thread: SyslogObjectForwarder] ERROR, 14 Feb 2010 11:07:42,369, Could not send syslogs, removing the subscriber...Connection refused
SyslogCollector - [Thread: main] INFO , 14 Feb 2010 11:23:02,499, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 14 Feb 2010 11:23:02,501, System Initialized.
SyslogCollector - [Thread: main] INFO , 14 Feb 2010 11:23:02,850, Subscriber list is empty!
SyslogCollector - [Thread: main] INFO , 14 Feb 2010 11:23:06,047, Service started...
SyslogCollector - [Thread: main] INFO , 14 Feb 2010 23:59:33,732, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 14 Feb 2010 23:59:33,735, System Initialized.
SyslogCollector - [Thread: main] INFO , 14 Feb 2010 23:59:34,148, Subscriber list is empty!
SyslogCollector - [Thread: main] INFO , 14 Feb 2010 23:59:37,352, Service started...
SyslogCollector - [Thread: main] INFO , 15 Feb 2010 23:59:34,112, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 15 Feb 2010 23:59:34,115, System Initialized.
SyslogCollector - [Thread: main] INFO , 15 Feb 2010 23:59:34,565, Subscriber list is empty!
SyslogCollector - [Thread: main] INFO , 15 Feb 2010 23:59:38,168, Service started...
SyslogCollector - [Thread: main] INFO , 16 Feb 2010 11:57:43,806, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 16 Feb 2010 11:57:43,816, System Initialized.
SyslogCollector - [Thread: main] INFO , 16 Feb 2010 11:57:44,220, Subscriber list is empty!
SyslogCollector - [Thread: main] INFO , 16 Feb 2010 11:57:47,493, Service started...
SyslogCollector - [Thread: main] INFO , 16 Feb 2010 14:12:00,424, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 16 Feb 2010 14:12:00,427, System Initialized.
SyslogCollector - [Thread: main] INFO , 16 Feb 2010 14:12:00,781, Subscriber list is empty!
SyslogCollector - [Thread: main] INFO , 16 Feb 2010 14:12:04,007, Service started...
SyslogCollector - [Thread: main] INFO , 16 Feb 2010 23:59:33,851, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 16 Feb 2010 23:59:33,854, System Initialized.
SyslogCollector - [Thread: main] INFO , 16 Feb 2010 23:59:34,303, Subscriber list is empty!
SyslogCollector - [Thread: main] INFO , 16 Feb 2010 23:59:37,834, Service started...
SyslogCollector - [Thread: main] INFO , 17 Feb 2010 16:42:51,156, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 17 Feb 2010 16:42:51,166, System Initialized.
SyslogCollector - [Thread: main] INFO , 17 Feb 2010 16:42:51,516, Subscriber list is empty!
SyslogCollector - [Thread: main] INFO , 17 Feb 2010 16:42:54,734, Service started...
SyslogCollector - [Thread: main] INFO , 17 Feb 2010 23:59:33,673, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 17 Feb 2010 23:59:33,676, System Initialized.
SyslogCollector - [Thread: main] INFO , 17 Feb 2010 23:59:34,130, Subscriber list is empty!
SyslogCollector - [Thread: main] INFO , 17 Feb 2010 23:59:37,759, Service started...
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 16:55:42,526, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 16:55:42,533, System Initialized.
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 16:55:42,886, Subscriber list is empty!
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 16:55:46,111, Service started...
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 23:59:34,144, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 23:59:34,147, System Initialized.
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 23:59:34,604, Subscriber list is empty!
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 23:59:38,116, Service started...
Our secondary host shows a subscriber, however no syslog packets are seen. Also, this subscriber can not be unsubscribed (deleted).
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 16:09:19,098, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 16:09:19,101, System Initialized.
SyslogCollector - [Thread: main] WARN , 18 Feb 2010 16:09:22,723, Unable to resurrect connection to a subscriber.
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 16:09:22,770, Service started...
SyslogCollector - [Thread: Thread-11] WARN , 18 Feb 2010 16:14:07,828, Unable to add monitor for
SyslogCollector - [Thread: Thread-13] WARN , 18 Feb 2010 16:14:08,008, Unable to add monitor for
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 16:32:29,557, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 16:32:29,560, System Initialized.
SyslogCollector - [Thread: main] WARN , 18 Feb 2010 16:32:33,205, Unable to resurrect connection to a subscriber.
SyslogCollector - [Thread: main] WARN , 18 Feb 2010 16:32:33,263, Unable to resurrect connection to a subscriber.
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 16:32:33,277, Service started...
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 23:59:33,728, Logging System Initialized.
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 23:59:33,733, System Initialized.
SyslogCollector - [Thread: main] WARN , 18 Feb 2010 23:59:37,786, Unable to resurrect connection to a subscriber.
SyslogCollector - [Thread: main] WARN , 18 Feb 2010 23:59:37,857, Unable to resurrect connection to a subscriber.
SyslogCollector - [Thread: main] INFO , 18 Feb 2010 23:59:37,869, Service started...
Similar Messages
-
Our site requires Third Party SSL certificates to be installed on our servers. We have an agreement with inCommon. I have to supply a CSR in order to obtain the SSL certificate.
My installation is on a Windows 2008 server and I had the self-signed CSR already but it is only 1024 bits. Is there someplace in the GUI or OS where I can change the encryption?This is a shot in the dark, but since CiscoWorks is using (I believe) Tomcat as the web server, could you run keytool to generate the CSR?
http://help.godaddy.com/article/5276
You could also use an online CSR gererator such as:
http://www.gogetssl.com/eng/support/online_csr_generator/
The key (pun intended) is having the private key on your server so that when you get the signed certificate and install it (using sslutil) it will be usable.
Hope this helps. -
SSL - Installing Third party secure certificates
Hi,
I am having problem while importing third party secured certificates (Verisign).
In STRUST, after import It was still saying Self-Signed message for third party certificates. I am not sure weather this is correct behavior or not.
After launch browser, the certificate status showing with message
"This CA Root certificate is not trusted because it is not in the Trusted Root Certification Authorities store."
Please help me to solve this issue. Any other procedure we need to follow to import third party certificates
Thanks in advance
Regards
SrinivasI'm guessing, you'll need to download the Verisign Trusted Root CA certificate from verisign.com and import it into your certificate list in STRUSTSSO2. Under the System PSE node.
If you doubeclick the response certificate from Verisign, you may be able to see what is heirarchy / trust chain for verisign certs. If it's more than just root, cert, you'll probably need to add the intermediate certs too. Check out verisign link, maybe it'll explain better.
https://www.verisign.com/support/ssl-certificates-support/page_dev028341.html
Also is the self signed message on teh SSL Server PSE node, or the server node? it shouldn't say self-signed if it's the (as example below) sapserver_sid_00 node.
SSL Server
|_ sapserver_sid_00
Hope that helps.
regards,
Laurence...
disclaimer:
The content of this message is my personal opinion only and, the statements I make here in no way represent my employer's position on the issue, nor am I authorized to speak on behalf of my employer on this matter. -
Replace Self-Signed FAST Search Certificate with Third Party Certificate
We are trying to replace the Self-Signed FAST Search Certificate with Third Party Certificate in our SP 2010 environment. And are facing issues while enabling the SSL communication between the FAST servers and the corporate servers.
Our FAST search servers are in a different farm than that of the Corporate Servers.
The details of the certificate we received is as follows:
Issued to : FastSearchCert
Issued By: Issuer Name
Valid From: 4/21/2015 to 4/20/2017
We were able to successfully renew the certificate on the FAST Search Server by following the below steps:
1. Login to the Administrative and the Non-Administrative nodes
of the FAST server. Go to Windows Service and stop the FAST Search for SharePoint and the FAST Search for SharePoint Monitoring services in both the servers.
Follow the below steps in the Administrative Node followed by the Non-Administrative Node
2.
Install the certificate in the following paths in the certificate store:
“Certificates(Local Computer)\Personal”
“Certificates(Local Computer)\Trusted Root Certification Authorities”
3. Ensure that the user account configured for the “FAST Search Server 2010 for SharePoint” has access to the private key of the certificate.
4. Go the Administrative node of the FAST farm and follow the below steps:
Go to the certificate store.
Expand the Personal folder and then click the Certificates folder. Double-click the third party signed FAST certificate.
Open the Details tab and then click Thumbprint. Note down this thumbprint.
5. Next, open
Microsoft FAST Search Server 2010 for SharePoint with Administrator
Privileges.
6.
Navigate to the directory, “D:\FASTSearch\installer\scripts” and execute the below command to replace the current certificate with the newly created
third party signed FAST certificate.
.\ReplaceDefaultCertificate.ps1 -thumbprint "certificate thumbprint".
7. The FAST certificate was renewed successfully.
Once the certificate has been renewed successfully in both the nodes, follow the below step:
8. Start the FASTSearch for SharePoint and the FAST Search
for SharePoint Monitoring services in the administrator server.
Next, while enabling the SSL communication between the FAST servers and the other corporate servers, we follow the below steps:
1.
Copy the new certificate from any of the FAST servers to all the web-front end and application servers in the corporate farm, in order to enable SSL communication between these servers and the FAST farm.
2. Also, copy the script
‘SecureFASTSearchConnector.ps1’ from the location “%FASTSearchFolder%\installer\scripts” in the FAST servers
to the web-front end and application servers of the corporate farm.
3. Follow the below steps on each of the servers in the corporate farm:
Open ‘SharePoint 2010 Management Shell’ with administrator privileges and navigate to the directory in which
SecureFASTSearchConnector.ps1’ script is located.
And then, execute the below command:
.\SecureFASTSearchConnector.ps1 -certThumbprint "certificate thumbprint" –ssaName “FASTCibtebtSSA” –username “DOMAIN\SP_Farm”
Where,
-certThumbprint
- Thumbprint of the certificate
-ssaName – FAST Content SSA
-username – The account configured to run the SharePoint
Search Service
On execution of the above command, we receive an error message stating that the "Connection to the Content Distributor servername.corp.abc.org: 14391 could not be validated...instance of FAST search server backend is running"
Please help us resolve this issue. We have not been able to find the cause of the above error for a long time.
Any help is much appreciated.Your tip on exporting from eDir to locate a missing private key was very helpful. Here are my steps to renew an expired third party certificate when the private key, generated 30 months ago in my case, could not be located.
In iManager, browse the tree and locate the likely certificate object. The Attributes for the object show Subject Name = webmail.acme.com. Selected the certificate and exported to webmailcert.pfx.
Then, the openssl commands in TID 7004039, "How to convert a SSL PFX to a PEM file", were run against the .pfx file to create cert.pem, key.pem and server.key files.
TID 7015500, "How to determine if private key belongs to public key (certificate)", was followed to determine if the public key (downloaded from third party) and private key (just retrieved from iManager) match - they did - that is, the private key converted from webmailcert.pfx matches the downloaded certificate.
TID 7013103, "How to create a .pem File for SSL certificate Installations", was followed to manually create a server.pem file using openssl.
TID 7010584, "How to setup SSL Certificate for Apache", part labeled "Additional Information" was followed to modify /etc/apache2/vhosts.d/vhost-ssl.conf file. Server.pem file created above copied to /etc/apache2/ssl.crt/ and /etc/ssl/servercerts/ directories as specified in vhost-ssl.conf.
Restarted apache2.
www.digicert.com has an SSL Certificate Checker that can be used to verify the installation is successful. -
Third Party CA certificate requirement for Cisco expressway C and E
Hi All,
We have implemented MRA solution for our customer, We had ask to procure the CA certificate from Third party CA certificate issuing vendor.
We had shared CSR request generated from Expressway C and E application to generate SSL certificate, As per cisco document we had ask to procure “Quick SSL premium single domain” CA certificate for Expressway Series E and C server but as per the certificate issuing vendor, the application required “Quick SSL premium multi domain” as they observed extra SANs in CSR generated from the Expressway C and E applications. Need help to find out application required certificate, who are using Third Party CA certificate for MRA solution.First of all, I don't see how you cant get away with single domain certificate. I have looked into this more. This is because you need to add your domain name in the SAN as detailed below.
Secondly, I am not sure where you are going to generate the certificates from..You should generate your CSR from here..
Go to Maintenance > Security certificates > Server certificate
NB: Customer’s service discovery domain is required to be included as a DNS SAN in all Expressway-E server certificates
This is what the CSR page looks like -
Really Apple?
With the release OSX 10.8.5 Apple has once again showed its true colors, and continued its efforts to create a closed Apple system, which eliminates third party vendors, unless, one can only assume... they pay.
Included in this OSX update is the disabling of the built-in camera to work with third party applications such as Skype and Gmail video chat. No surprise the camera works just fine with Apple apps such as Facetime and Photobooth.
The answer I got on my call to AppleCare to ask for assistance in reinstalling 10.8.4, so that I may Skype again, was we can not do that. You can not go back unless you have a time machine bkup.
Can anyone help me get back to to 10.8.4 on my 2013 MB Air?
I do not have a time machine bkup as this computer is not used to store important documents.
Thank you.Read this post: 10.8.5 Broke Camera Usage For 3rd Party Apps Like Skype
Another: isight not recognized in Skype after 10.8.5 upgrade
Don't panic. Skype simply needs to update its app. -
How to integrate single sign on with third party system
we are in the process of implementing istore application. we already have home grown isupport application to contact support personnal for any issues. Now we are wondering how do we integrate oracle applications single sign on with our third pary system. Is there any recommendation provided by oracle to achieve the same.
We too are in the process of implementing iStore with SSO features.
And if you believe me it seems to me as nightmare.
In our scenerio we are intgrating this SSO with Third party access control too (AD and Siteminder). I would request you to please respond me on the following mail id , so we can share our experince which will help us in our implementation
[email protected]
regards and thanks in advance
Vikas Deep -
SharePoint 2013 on-premises integration with third party email account
the Email sending issue from SharePoint is causing too much time waste
First let me explain how our SharePoint is deployed
Sharepoint version : 2013
Deployment type : on-premise
Authentication : from Domain controller also hosted locally
domain name ; say domain.com this domain.com is same as our website address hosted on godaddy
SharePoint computer name on local DNS : sharepoint.domain.com
OS and IIS : 2008 r2 , IIS 7.5
Network firewall : 25 26 ports opened for sharepoint , both incoming and outgoing.
Server firewall : turned off
Email configuration Attempts by IIS 6.0
We tried following setting on IIS 6.0 SMTP local server properties
In General tab
qualified name was shown as : sharepoint.dts-solution.com
IP assigned : sharepoint server IP , advanced putted two entries of IP with ports as 25,26
In Access tab
Authentication : selected as Anonymous
Connection : All except below list : empty list
Relay : only the list below , one entry as 127.0.0.1 and other is local static IP of SharePoint server
in Delivery tab
outbound security : Basic authentication : accessed user in AD and given the right password, also checked with annonymous -not working
outbound connection: all default values and port = 25
Advance : fully qualified domain name = sharepoint.domain.com , DNS test showed success, rest every check box unchecked
On sharepoint central management settings
Outbound email = sharepoint.domain.com
from and reply to address = [email protected]
IIS 7.5 SMTP settings
In IIS 7.5 sharepoint application we added SMTP settings as smtp server = godaddy out going smtp , user name as [email protected] , password = godaddy password , port : godaddy outgoing port .
Godaddy account
Our website hosted on godaddy with same name as domain.com
open relay not possible on emails.
Results
After setting alerts on SharePoint sites and assigning tasks with alerts we receive email in queue folder but they never get forwarded. We just wish to use any of our email *.domain.com to send outgoing emails from SharePoint . Its been a while we have no
success.
Tech LearnerHi,
As I understand, you are using SharePoint 2013 integrating with third party SMTP server which provides email function.
From SharePoint side, I'd suggest you refer to the link below to configure email integration:
http://technet.microsoft.com/en-us/library/ee956941(v=office.15).aspx
If you have already confirm that message is sent from SharePoint, while stuck in queue on SMTP server, then the issue might be related to relay on SMTP server. Since the issue is related to third party product, we do not have enough resource here,
I'd recommend you contact their support engineer for more assistance:
https://support.godaddy.com/help/category/154/email
https://support.godaddy.com/help/article/3552/managing-your-email-account-smtp-relays
Thanks for the understanding.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support -
Integration of ChaRM with third party tools
Hi all,
We are in the process of building the solution for Change Request Management implementation integrated with third party tool.
As the normal process for ChaRM is to work with the Service Desk functionality (to raise a ticket, then support message, change request, change document etc...), but what we need is create the change request, and change document directly with ChaRM without using the Service Desk functionality.
Did anybody come across this situation?
Please share your experience.
Thanks in advance.
BalajiHi Balaji,
there is no problem, as I understand, you want to use ChaRM without Service Desk. OK, than you create directly a Change Request in CRMD_ORDER, the transaction type you have to select is SDCR (standard transaction type), you have to approve it and then you can create a change document, it is not necessary that you start with a Service Desk ticket like SLFN.
You need configured TMS a SolMan Project with a Maintenance Cycle, thats it (but this is enough , don't forget the customizing).
I hope I understood you correct
Udo -
Conflict with Third Party Apps?
I am getting an occasional error saying there is a possible conflict with third party apps and that I need to check the drivers of my MIDI devices to see if they are up to date? Sorry but I did not record the exact wording. Does anyone know what this might mean, and how I need to go about checking drivers? I have a lot of interfaces and not sure how to see what's what. Thanks.
Hi Midlake,
Well, because they are known troublemakers. Search for 'takes' or 'take folder(s)' or 'comp' here on the forum and you'll find many a troubled soul crying out for help - including seasoned pro's, who thought they were beyond tears...
O, they are fine for recording many takes - but thats' all. I'll select the best takes/phrases.
regards, Erik. -
How to integrate DRM with third party tool for loading metadata in SQL table
Experts,
I am new to DRM and I have a requirement in which we want to integrate DRM with third party tool(lets say SQL table) as target and load metadata from DRM (Parent node, name , alias etc) to SQL table (same column name)
Is there any way we can integrate DRM to export the same to table directly instead to files. If yes what are the steps we have to follow.
Is there anyway we can customize DRM to execute queries or run batch
Can I have a basic example please.
Thanks in advance,
Regards,1. Use DRM Export to Table option, for that create an External Connection first for the Target Database and select the respective Tables to which you wish to Export the Hierarchy information.
2. You can perform most of the DRM Actions via the DRM_BATCH_CLIENT.exe.
Please refer to Using the Data Relationship Management Batch Client of DRM User guide.
let me know if you have any issues. -
How to integrate iReceivables with third party payment system?
Hi,
My requirement is to integrate iReceivables with third party payment system.
Can anyone guide me to achieve this.
Thanks & Regards,
SunitaHello Prasad,
<b>Connection with an External Payroll System</b>
Payroll Outsourcing functionality allows you to compile master data or payroll data in the SAP system to submit to a third-party service provider in an electronic format. The Outsourcing solution available in the United States and Canada provides a generic interface which writes data into an IDoc (Intermediate Document) for transport to a third-party system. In order to transport data into and out of the SAP system, you must set up a logical system, partner definition, and outsourcing ports.
If you have built your own payroll interface, using the Interface Toolbox, for example, you can use the Import section of this scenario. The Export section applies only to the transport of IDocs.
For more information regarding outsourcing, refer to the SAP Library, Human Resources -> PY Payroll -> PY-US United States Payroll or PY-CA Canada Payroll -> Outsourcing.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/af/f4ea3444e9c47fe10000009b38f83b/frameset.htm
Import Payroll Results from a Third-Party System
http://help.sap.com/saphelp_erp2005vp/helpdata/en/0a/e62481feaf11d1a5500060087832f8/frameset.htm
regards
Prasad
Message was edited by:
prasad chintala -
Can you connect the Lightning to 30-pin adapter and Lightning to 30-pin Adapter (0.2 m) to iPod nano (7th generation) with third-party accessories?
Lightning to 30-pin adapter and Lightning to 30-pin adapter (0.2m) do not work if connected together by other third-party accessories.
-
SAP IDM 7.0 integration with third party system
Hi Experts,
I know SAP IDM 7.0 can integrate with third party systems and create user ids on most of the third party systems.
But I need to know regarding If it is possible to integrate with following systems
1) Microsoft Exchange 2007 ( I know till exchange 2003 SAP IDM support )
2) Microsoft Active directory 2008 ( I know till Actice directory 2003)
3) EMC Documentum 6.5
4) ARIS 7.1.0
5) BlackBoard, Release 9.0
6) Oracle 10g ( Is it possible to create users at oracle level ? or at what level ? )
7) Sun Solaris Sparc ( Is it possible to create users at OS level )
If you have information how on this please share. I know that provisioning framework will have templates for most of the target systems. I want to know if they are available for above systems on SAP IDM 7.0 or if not have we can connect to them?Hi Matthew
Your expertise in SAP IDM is indeed a great help!!
>Can't see why not, it's all done via SQL commands. I've done similar things with MSSQL
You mean that there will be oracle 10g drivers/oledb connectors in SAP IDM and in through SQL commands like "create user alfredo identified by alfredos_secret; " we can create user in oracle database ?. As you said this should be possible. What about creating user( user management ) in oracle 10g application like dba or scot and assigning the privileges in oracle application?
>might need to do via UNIX scripts, but it can be done
You mean that Unix scripts will be defined in SAP IDM and SAP IDM will execute these scripts in the Sun Solaris Sparc ?. It should be possible as you said. By the way how we will be able connect to Sun Solaris sparc ? Is it via the option "file " under the "Repositories" with repositories wizard and later executing the file from SAP IDM ?
Thank you once again for your expert answers on third party systems. -
Best practices for apps integration with third party systems ?
Hi all
I would like to know if there is any document from oracle or from your own regarding best practices for apps integration with third party systems.
For example, in particular, let's say we need customization in a given module(ex:payables) need to provide data to a third party system, consider following:
outbound interface:
1)should third party system should be given with direct access to oracle database to access a particular payments data information table/view to look for data ?
2) should oracle create a file to third party system, so that it can read and do what it need to do?
inbound:
1) should third party should directly login and insert data into tables which holds response data?
2) again, should third party create file and oralce apps will pick up for further processing?
again, there could be lot of company specific scenarios like it has to be real time or not... etc...
How does companies make sure third party systems are not directly dipping into other systems (oracle apps/others), so that it will follow certain integration best practices.
how does enterprise architectute will play a role in this? can we apply SOA standards? should use request/reply using Tibco etc?
Many oracle apps implementations customizations are more or less directly interacting with third party systems by including code to login into respective third party systems and vice versa.
Let me your know if you have done differently and that would help oracle apps community.
thanks
rrb.you want to send idoc to third party system (NONSAP).
what kind of system is it? can it handle http requests
or
can it handle webservice?
which version of R/3 you are using?
what is the mechanism the receiving system has, to receive data?
Regards
Raja
Maybe you are looking for
-
Iphone doesnt receive incoming calls
Hi, for about 2 weeks i cannot receive incoming phone calls any more. Earlier it worked without problems. Now even in the phone log, no incoming calls are registered. I can make phone calls by myself, i can receive incoming calls by facetime, but no
-
Text wrap dialogue box is blank in CS3
I am not able to view the options in the text wrap dialogue box - why? I have restarted InDesign and my computer but there are no options showing in the dialogue box. I use text wrap all the time so this is a major problem for me. Thanks for your hel
-
How do I print to file, and what format gets generated?
I was trying to print a web-page to a file so I could connect to my printer later to print. I managed to get the file to appear, but I don't know what its format is! I gave it no extension - my guesses didn't help... Any clues? Thanks!
-
ICloud sign in problem! -maximum number of free accounts have been activated
I want to sign in to iCloude account on my iPhone but it shows that the maximum number of free accounts have been activated in this iPhone. what should i do now? I am trying to sign in with the same id I tried previously!
-
Oracle object, nested table on a subtype
Hello, Is it possible to have a nested table on a subtype? If it is, can someone help me? Here is what I need help for: I have a supertype WORK, that have: multivalued attribute ADDRESS a attribute NAME, also the primary key The subtype is called EMP