Sysman does not exist

I have an oracle database on HP machine. There is a sysman directory under $ORACLE_HOME/. There is a schema 'dbsnmp' but no schema 'sysman' in the database. The document says the user sysman was created by defalt when the database was created. I don't know why the user 'sysman' is not in the database. Will the user 'sysman' be dropped when you run the command 'emca -repos recreate'? If yes, the command suppose to recreate the user. By I had the following error in the log file:
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-01034: ORACLE not available
The following lines are the output on the standard output:
mspprf44:[promote] /u01/oracle/10g/bin> emca -repos create
STARTED EMCA at Nov 12, 2007 9:43:43 AM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: promote
Listener port number: 1521
Password for SYS user:
Password for SYSMAN user:
Password for SYSMAN user:
Password for SYSMAN user:
Password for SYSMAN user:
Password for SYSMAN user:
Do you wish to continue? [yes(Y)/no(N)]: yes
Nov 12, 2007 9:44:13 AM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /u02/oracle/10g/cfgtoollogs/emca/emca_2007-11-12_09-43-43-AM.log.
Nov 12, 2007 9:44:14 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Database instance unavailable.
Refer to the log file at /u02/oracle/10g/cfgtoollogs/emca/emca_2007-11-12_09-43-43-AM.log for more details.
Could not complete the configuration. Refer to the log file at /u02/oracle/10g/cfgtoollogs/emca/emca_2007-11-12_09-43-43-AM.log for more details.
Any help will be appreciated. Thanks.

Thank you for your reply. My database and listner are up. The $ORACLE_HOME and $ORACLE_SID are set correctly. I can connect to the database as sysdba with sqlplus. I had the following error when I ran 'emca -config dbconsole db -repos recreate'. I have reset the password for user 'dbsnmp'.
mspprf44:[promote] /u01/oracle/10g/bin> emca -config dbcontrol db -repos recreat e
STARTED EMCA at Nov 12, 2007 1:42:55 PM
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: promote
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Invalid username/password. [ORA-01034: ORACLE not available]
Password for DBSNMP user:
Invalid username/password. [ORA-01034: ORACLE not available]

Similar Messages

Not able to create EM repository - ORA-00942: table or view does not exist

-bash-3.00$ emca -config dbcontrol db -repos recreate
STARTED EMCA at 2010-06-02 12:12:29
EM Configuration Assistant, Version 10.2.0.1.0 Production
Copyright (c) 2003, 2005, Oracle. All rights reserved.
Enter the following information:
Database SID: eric1
Listener port number: 1521
Password for SYS user:
Password for DBSNMP user:
Password for SYSMAN user:
Email address for notifications (optional):
Outgoing Mail (SMTP) server for notifications (optional):
You have specified the following settings
Database ORACLE_HOME ................ /oracle/product/10.2.0/db_1
Database hostname ................ solx
Listener port number ................ 1521
Database SID ................ eric1
Email address for notifications ...............
Outgoing Mail (SMTP) server for notifications ...............
Do you wish to continue? [yes(Y)/no(N)]: Y
2010-06-02 12:12:52 oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_2010-06-02_12-12-29-PM.log.
2010-06-02 12:13:02 oracle.sysman.emcp.EMReposConfig dropRepository
INFO: Dropping the EM repository (this may take a while) ...
2010-06-02 12:13:05 oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /oracle/product/10.2.0/db_1/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=solx)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=eric1))) -repos_user SYSMAN -action drop -verbose -output_file /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_repos_drop_2010-06-02_12-13-02-PM.log
2010-06-02 12:13:05 oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error dropping the repository
2010-06-02 12:13:05 oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_repos_drop_<date>.log for more details.
2010-06-02 12:13:05 oracle.sysman.emcp.EMConfig perform
SEVERE: Error dropping the repository
Refer to the log file at /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_2010-06-02_12-12-29-PM.log for more details.
Could not complete the configuration. Refer to the log file at /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_2010-06-02_12-12-29-PM.log for more details.So I looked into a log file: /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_2010-06-02_12-12-29-PM.log
Here is an end of it ( I can paste all log file if necessary but it is very long):
CONFIG: Starting execution: /oracle/product/10.2.0/db_1/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=solx)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=eric1))) -repos_user SYSMAN -action drop -verbose -output_file /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_repos_drop_2010-06-02_12-13-02-PM.log
2010-06-02 12:13:05 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 51
2010-06-02 12:13:05 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Enter SYS user's password :
Enter repository user password :
Getting temporary tablespace from database...
prepare(SELECT tablespace_name FROM dba_tablespaces WHERE contents='TEMPORARY' AND status='ONLINE'): ORA-00942: table or view does not exist (DBD ERROR: error possibly near <*> indicator at char 28 in 'SELECT tablespace_name FROM <*>dba_tablespaces WHERE contents='TEMPORARY' AND status='ONLINE'')
2010-06-02 12:13:05 oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: stty: : No such device or address
stty: : No such device or address
stty: : No such device or address
stty: : No such device or address
2010-06-02 12:13:05 oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /oracle/product/10.2.0/db_1/sysman/admin/emdrep/bin/RepManager -connect (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=solx)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=eric1))) -repos_user SYSMAN -action drop -verbose -output_file /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_repos_drop_2010-06-02_12-13-02-PM.log
2010-06-02 12:13:05 oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error dropping the repository
2010-06-02 12:13:05 oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_repos_drop_<date>.log for more details.
2010-06-02 12:13:05 oracle.sysman.emcp.EMConfig perform
SEVERE: Error dropping the repository
Refer to the log file at /oracle/product/10.2.0/db_1/cfgtoollogs/emca/eric1/emca_2010-06-02_12-12-29-PM.log for more details.
2010-06-02 12:13:05 oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error dropping the repository
        at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:176)
        at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:127)
        at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:142)
        at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:479)
        at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1123)
        at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:463)
        at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:412)...and here I can easly see that error: ORA-00942: table or view does not exist.
But what does it mean to me ? I mean what should I ro to create/recreate missing table or view ?

Hi, so here are my tries:
1. admin:
Below Dirs dont not exist:
<ORACLE_HOME>/<hostname_sid>
<ORACLE_HOME>/oc4j/j2ee/OC4J_DBConsole_<hostname>_<sid>
...also it was unable to drop user - does not exist
-bash-3.00$ sqlplus "/as sysdba"
SQL*Plus: Release 10.2.0.2.0 - Production on Wed Jun 2 12:55:44 2010
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.2.0 - Production
SQL> sqlplus "/as sysdba"
drop user sysman cascade;
drop role MGMT_USER;
drop user MGMT_VIEW cascade;
drop public synonym MGMT_TARGET_BLACKOUTS;
drop public synonym SETEMVIEWUSERCONTEXT;
SP2-0734: unknown command beginning "sqlplus "/..." - rest of line ignored.
SQL> drop user sysman cascade
ERROR at line 1:
ORA-01918: user 'SYSMAN' does not exist
SQL> drop role MGMT_USER
ERROR at line 1:
ORA-01919: role 'MGMT_USER' does not exist
SQL> drop user MGMT_VIEW cascade
ERROR at line 1:
ORA-01918: user 'MGMT_VIEW' does not exist
SQL> drop public synonym MGMT_TARGET_BLACKOUTS
ERROR at line 1:
ORA-01432: public synonym to be dropped does not exist
SQL> drop public synonym SETEMVIEWUSERCONTEXT
ERROR at line 1:
ORA-01432: public synonym to be dropped does not exist
{code}
I also tried this:
2. coskan
{code}
-bash-3.00$ sqlplus sys/qaz123@eric1 as sysdba
SQL*Plus: Release 10.2.0.2.0 - Production on Wed Jun 2 12:51:34 2010
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
Connected to:
Oracle Database 10g Release 10.2.0.2.0 - Production
SQL> SELECT tablespace_name FROM dba_tablespaces WHERE contents='TEMPORARY' AND status='ONLINE';
SELECT tablespace_name FROM dba_tablespaces WHERE contents='TEMPORARY' AND status='ONLINE'
ERROR at line 1:
ORA-00942: table or view does not exist
{code}

Emca fails - ORA-04043: object HA_HOST_CREDS_ARR does not exist

I'm recreating an EM repository in an 11g database which I upgraded from 10g recently. Its running on Solaris 10 and its repository wasn't working so I dropped it with plans to recreated it. As part of the prep work I did the following:
- Dropped user sysman with cascade option
- Dropped public synonyms referencing tables owned by sysman
- Altered profile default making its attributes unlimited (company I work for change it for security)
- Dropped role MGMT_USER
After setting the Oracle Home and SID I ran emca:
emca -config dbcontrol db -repos create
It produced errors detailed in emConfig.log and its associated emca_repos_create_<date>.log respectively:
emConfig.log
Jan 18, 2011 1:48:20 PM oracle.sysman.emcp.EMReposConfig createRepository
INFO: Creating the EM repository (this may take a while) ...
Jan 18, 2011 1:48:27 PM oracle.sysman.emcp.EMReposConfig createRepository
CONFIG: ORA-04043: object HA_HOST_CREDS_ARR does not exist
ORA-06512: at line 14
oracle.sysman.assistants.util.sqlEngine.SQLFatalErrorException: ORA-04043: object HA_HOST_CREDS_ARR does not exist
ORA-06512: at line 14
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeImpl(SQLEngine.java:1650)
at oracle.sysman.assistants.util.sqlEngine.SQLEngine.executeScript(SQLEngine.java:1000)
at oracle.sysman.assistants.util.sqlEngine.SQLPlusEngine.executeScript(SQLPlusEngine.java:339)
at oracle.sysman.assistants.util.sqlEngine.SQLPlusEngine.executeScript(SQLPlusEngine.java:380)
at oracle.sysman.emcp.EMReposConfig.createRepository(EMReposConfig.java:511)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:229)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:589)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1448)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:573)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:521)
Jan 18, 2011 1:48:27 PM oracle.sysman.emcp.EMReposConfig invoke
SEVERE: Error creating the repository
Jan 18, 2011 1:48:27 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Refer to the log file at /u01/app/oracle/cfgtoollogs/emca/t28gdr/emca_repos_create_<date>.log for more details.
Jan 18, 2011 1:48:27 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error creating the repository
Refer to the log file at /u01/app/oracle/admin/t28gdr/scripts/emConfig.log for more details.
Jan 18, 2011 1:48:27 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error creating the repository
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:241)
at oracle.sysman.emcp.EMReposConfig.invoke(EMReposConfig.java:158)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:253)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:589)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1448)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:573)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:521)
Jan 18, 2011 1:48:27 PM oracle.sysman.emcp.EMConfig restoreOuiLoc
CONFIG: Restoring oracle.installer.oui_loc to /u01/app/oracle/product/11.2.0/db_1/oui
emca_repos_create_2011_01_18_13_48_20.log
Check if repos user already exists.
old 6: WHERE username=UPPER('&EM_REPOS_USER');
new 6: WHERE username=UPPER('SYSMAN');
old 8: IF ( '&EM_CHECK_TYPE' = 'EXISTS') THEN
new 8: IF ( 'NOT_EXISTS' = 'EXISTS') THEN
old 11: raise_application_error(-20000, '&EM_REPOS_USER does not exists..');
new 11: raise_application_error(-20000, 'SYSMAN does not exists..');
old 14: ELSIF ( '&EM_CHECK_TYPE' = 'NOT_EXISTS' ) THEN
new 14: ELSIF ( 'NOT_EXISTS' = 'NOT_EXISTS' ) THEN
old 17: raise_application_error(-20001, '&EM_REPOS_USER already exists..');
new 17: raise_application_error(-20001, 'SYSMAN already exists..');
old 21: raise_application_error(-20002, 'Invalid Check type &EM_CHECK_TYPE');
new 21: raise_application_error(-20002, 'Invalid Check type NOT_EXISTS');
Create SYSMAN user.
No errors.
Script to revoke DBA role from SYSMAN and grant required privileges
No errors.
Create core schema..
No errors.
No errors.
No errors.
No errors.
No errors.
No errors.
DECLARE
ERROR at line 1:
ORA-04043: object HA_HOST_CREDS_ARR does not exist
ORA-06512: at line 14
How can I correct this so the repository install progresses?
Thanks!
Edited by: Timothy from Minneapolis on Jan 18, 2011 1:04 PM
Edited by: Timothy from Minneapolis on Jan 18, 2011 1:05 PM

Hi,
the missing object is a "table-type" object which you can create with the statement:
CREATE TYPE "SYSMAN"."HA_HOST_CREDS_ADDR" AS
TABLE OF "SYSMAN"."HA_HOST_CREDS_OBJ"
But this will work only if the "object-type" object HA_HOST_CREDS_OBJ exists. If not, here's the statement:
CREATE TYPE "SYSMAN"."HA_HOST_CREDS_OBJ" AS OBJECT ( "CRED_SET"
VARCHAR2(32), "PASSWORD" VARCHAR2(256), "USERNAME"
VARCHAR2(256) )
I'm not sure why this objects don't exist - the belong to the user SYSMAN and should get created when creating the user SYSMAN...
HTH

Error trying to recreate OEM dbconsole in 11GR2 - aux_stats$ does not exist

I created a blank 11GR2 database, then created tablespaces, users etc. and imported schema's from 9i export. So far so good.
Now I can't connect to the OEM dbconsole, all arrows are green, instance up, listener up etc. but says it cant connect.
Ok, recreate dbsonsole , first drop sysman, dbsmp cascade etc, then run emca -deconfig dbcontrol db -repos drop - seemed to go ok
then run emca -config db -repos create - it asks for passwords etc, all ok so far, then craps out, I look in the logfile and see this:
GRANT SELECT, INSERT, UPDATE, DELETE ON AUX_STATS$ TO SYSMAN
ERROR at line 1:
ORA-00942: table or view does not exist
So now what? Why would it try to grant access to a table or view that does not exist? Did I miss something here?
thanks

This will give you the complete picture of Grid Certification.
Oracle Enterprise Manager 10g Grid Control Certification Checker
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=412431.1
Is there a workaround or a version that will install on 2008 x64?Well, no OMS has been certified with this version as of now. You can have 10.2.0.3/4 OMS on 2008(32 Bit)
10.2.0.4 Agent is certified with 2008 64 bit.

11g R2 -silent install: "Template General_Purpose.dbc does not exist"

I'm working in an environment where no X-Windows/GUI is permitted; therefore, I'm attempting to perform a -silent install of 11g R2 on RHEL 5.3 and am finding the screen output to my terminal window less than helpful. Fortunately, a thorough review of the install actions log provides what appears to be my problem.
The screen output I receive is as follows (I've added some line breaks to make it more readable):
(oracle@blade2-1 database)$ cd /opt/oracleStagingArea/Oracle11gR2/11.2.0.1.0/Disk1/database
(oracle@blade2-1 database)$ ./runInstaller -silent -responseFile /home/oracle/ResponseFiles/11gR2/ORCL11GD_enterprise_11201.rsp
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 91127 MB Passed
Checking swap space: must be greater than 150 MB. Actual 8000 MB Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2009-09-14_01-25-28PM. Please wait ...
(oracle@blade2-1 database)$
You can find the log of this install session at:
/u01/app/oracle/oraInventory/logs/installActions2009-09-14_01-25-28PM.log
That's it - no indication as to whether the installation was successful or failed or whether the NETCA/DBCA/etc. were successful or not.
I found that a listener existed after the install:
(oracle@blade2-1 database)$ ps -ef | grep tns
oracle 22597 1 0 13:29 ? 00:00:00 /u01/app/oracle/product/11.2.0/db_1/bin/tnslsnr LISTENER -inherit
My instance didn't appear to be up, though:
(oracle@blade2-1 database)$ ps -ef | grep ORCL11GD
oracle 22776 19142 0 13:39 pts/0 00:00:00 grep ORCL11GD
So, I checked the /u01/app/oracle/oraInventory/logs/installActions2009-09-14_01-25-28PM.log to see what it revealed. It shows me the following for the DBCA:
INFO: Started Plugin named: Oracle Database Configuration Assistant
INFO: Found associated job
INFO: Starting 'Oracle Database Configuration Assistant'
INFO: Starting 'Oracle Database Configuration Assistant'
INFO: Executing DBCA
INFO: Command /u01/app/oracle/product/11.2.0/db_1/bin/dbca -silent -createDatabase -templateName General_Purpose.dbc -sid ORCL11GD -gdbName orcl11gd.blade2-1.mycompany.com -emConfiguration LOCAL -storageType FS -datafileDestination /u02/oradata -datafileJarLocation /u01/app/oracle/product/11.2.0/db_1/assistants/dbca/templates -responseFile /home/oracle/ResponseFiles/11gR2/ORCL11GD_enterprise_11201.rsp -characterset WE8ISO8859P15 -obfuscatedPasswords false -sampleSchema false -oratabLocation /u01/app/oracle/product/11.2.0/db_1/install/oratab -automaticMemoryManagement true -totalMemory 2048 -maskPasswords false -oui_internal
INFO: ... GenericInternalPlugIn.handleProcess() entered.
INFO: ... GenericInternalPlugIn: getting configAssistantParmas.
INFO: ... GenericInternalPlugIn: checking secretArguments.
INFO: ... GenericInternalPlugIn: starting read loop.
INFO: Read: SYS_PASSWORD_PROMPT
INFO: Processing: SYS_PASSWORD_PROMPT for argument tag -sysPassword
INFO: Read: SYSTEM_PASSWORD_PROMPT
INFO: Processing: SYSTEM_PASSWORD_PROMPT for argument tag -systemPassword
INFO: Read: DBSNMP_PASSWORD_PROMPT
INFO: Processing: DBSNMP_PASSWORD_PROMPT for argument tag -dbsnmpPassword
INFO: Read: SYSMAN_PASSWORD_PROMPT
INFO: Processing: SYSMAN_PASSWORD_PROMPT for argument tag -sysmanPassword
INFO: End of argument passing to stdin
INFO: Read: Template General_Purpose.dbc does not exist. Please specify an existing template for database creation.
INFO: Completed Plugin named: Oracle Database Configuration Assistant
INFO: Oracle Database Configuration Assistant failed.
INFO: Oracle Database Configuration Assistant failed.
I don't see a template named "General_Purpose.dbc" in the $ORACLE_HOME/dbca/templates directory:
(oracle@blade2-1 database)$ cd /u01/app/oracle/product/11.2.0/db_1/assistants/dbca/templates
(oracle@blade2-1 database)$ ls -lrt
total 23216
-rw-r--r-- 1 oracle oinstall 11492 Feb 25 2009 New_Database.dbt
-rwxr-xr-x 1 oracle oinstall 1179648 Aug 14 03:01 example.dmp
-rwxr-xr-x 1 oracle oinstall 22536192 Aug 14 03:01 example01.dfb
Any suggestions would be welcomed!

Hans: None at all, unfortunately.
Srini: I obtained a copy of the note and read through it. It does look as though I should be able to run the DBCA in -silent mode to create a template, so no GUI needed. Thanks again!
On a side note: Did anybody else notice the "General_Purpose.dbc" template missing from the $ORACLE_HOME/dbca/templates directory after an 11g R2 software install on RHEL 5.3? I'm beginning to suspect that not all components were installed as expected during the software installation. the oraInstall<Date/Time>.err file is full of errors such as the following:
java.io.FileNotFoundException: /opt/oracleStagingArea/Oracle11gR2/11.2.0.1.0/Disk1/database/stage/Components/oracle.rdbms.install.seeddb/11.2.0.1.0/1/DataFiles/filegroup2.jar (No such file or directory)
All of these errors are complaining about only the following 4 compoments:
- oracle.ctx
- oracle.sysman.console.db
- oracle.owb.rsf
- oracle.rdbms.install.seeddb
Upon investigation, I found that there is no oracle.ctx, oracle.sysman.console.db, oracle.owb.rsf, or oracle.rdbms.install.seeddb under /opt/oracleStagingArea/Oracle11gR2/11.2.0.1.0/Disk1/database/stage/Compoments. Instead, the grouping is located under /opt/oracleStagingArea/Oracle11gR2/11.2.0.1.0/Disk2/database/stage/Components.
It seems that I may have staged the media incorrectly in two separate directories. Should I have unzipped both files into the same directory instead of separating them out?

The name "Folder" does not exist in the namespace

I am trying to learn Wpf and doing some of the examples on the Microsoft site. https://msdn.microsoft.com/en-us/library/vstudio/bb546972(v=vs.110).aspx?cs-save-lang=1&cs-lang=vb#code-snippet-1
I am using Visual studio 2013. As I work through the example I am getting the following error.
Error 1
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
11 17
FolderExplorer
Error 2
The name "Folder" does not exist in the namespace "clr-namespace:FolderExplorer".
c:\users\hbrown\documents\visual studio 2013\Projects\FolderExplorer\FolderExplorer\MainWindow.xaml
16 7
FolderExplorer
Here is the code:
<Window x:Class="MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:my="clr-namespace:FolderExplorer"
Title="Folder Explorer" Height="350" Width="525">
<Window.Resources>
<ObjectDataProvider x:Key="RootFolderDataProvider" >
<ObjectDataProvider.ObjectInstance>
<my:Folder FullPath="C:\"/>
</ObjectDataProvider.ObjectInstance>
</ObjectDataProvider>
<HierarchicalDataTemplate
DataType = "{x:Type my:Folder}"
ItemsSource = "{Binding Path=SubFolders}">
<TextBlock Text="{Binding Path=Name}" />
</HierarchicalDataTemplate>
</Window.Resources>
I have a class file named Folder.vb with this code.
Public Class Folder
Private _folder As DirectoryInfo
Private _subFolders As ObservableCollection(Of Folder)
Private _files As ObservableCollection(Of FileInfo)
Public Sub New()
Me.FullPath = "c:\"
End Sub 'New
Public ReadOnly Property Name() As String
Get
Return Me._folder.Name
End Get
End Property
Public Property FullPath() As String
Get
Return Me._folder.FullName
End Get
Set(value As String)
If Directory.Exists(value) Then
Me._folder = New DirectoryInfo(value)
Else
Throw New ArgumentException("must exist", "fullPath")
End If
End Set
End Property
ReadOnly Property Files() As ObservableCollection(Of FileInfo)
Get
If Me._files Is Nothing Then
Me._files = New ObservableCollection(Of FileInfo)
Dim fi As FileInfo() = Me._folder.GetFiles()
Dim i As Integer
For i = 0 To fi.Length - 1
Me._files.Add(fi(i))
Next i
End If
Return Me._files
End Get
End Property
ReadOnly Property SubFolders() As ObservableCollection(Of Folder)
Get
If Me._subFolders Is Nothing Then
Try
Me._subFolders = New ObservableCollection(Of Folder)
Dim di As DirectoryInfo() = Me._folder.GetDirectories()
Dim i As Integer
For i = 0 To di.Length - 1
Dim newFolder As New Folder()
newFolder.FullPath = di(i).FullName
Me._subFolders.Add(newFolder)
Next i
Catch ex As Exception
System.Diagnostics.Trace.WriteLine(ex.Message)
End Try
End If
Return Me._subFolders
End Get
End Property
End Class
Can someone explain what is happening.
Thanks Hal

Did you try to build the application (Project->Build in Visual Studio) ? If the error doesn't go away then and you have no other compilation errors (if you do you need to fix these first), you should replace "FolderExplorer" with the namespace
in which the Folder class resides. If you haven't explicitly declared a namespace, you will find the name of the default namespace under Project->Properties->Root namespace. Copy the value from this text box to your XAML:
xmlns:my="clr-namespace:FolderExplorer"
The default namespace is usually the same as the name of the application by default so if your application is called "FolderExplorer" you should be able to build it.
If you cannot make it work then please upload a reproducable sample of your issue to OneDrive and post the link to it here for further help.
Please remember to close your threads by marking helpful posts as answer and then start a new thread if you have a new question.

Short dump 'Table does not exist in database'

Hello All,
When a report is executing it is going to short dump by saying 'Table does not exist in database'. As per the short dump analysis this issue is happening because of the following   Native SQL statement statement :
Program : %_T050N0 (This is a dynamic program generating by SAP )
Form Name : DYN_LIC_SEL_TOT
exec sql performing LOOP_MOVE_WRITE_ISAP.
select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty into :dcat-lplate, :dcat-matnr,
:dcat-werks, :dcat-charg, :dcat-holdflag,
:dcat-qty from ZLICENSE_R2 where itm_num   = :p_matnr and
                model_lot = :p_charg
endexec.
As per the customer this issue occurring since they migrated the SAP back-end data base from Oralce to DB6. Here I felt that ZLICENSE_R2 is not migrated from the Oracle to DB6. But as per the BASIS Team, even this table was not maintained in Oracle also. If the table was not maintained in the Oracle, this issue should have been there even before migration also.
Following is the short dump details:
Short text
    Table does not exist in database.
What happened?
    The table or view name used does not
    exist in the database.
    The error occurred in the current database connection "DEFAULT".
What can you do?
    Check the spelling of the table names in your report.
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    An exception occurred that is explained in detail below.
    The exception, which is assigned to class 'CX_SY_NATIVE_SQL_ERROR', was not
     caught in
   procedure "DYN_LIC_SEL_TOT" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
Triggering SQL statement: "select single_plate, itm_num, ctry_code, model_lot,
lic_hold_flg, qty from ZLICENSE_R2 where itm_num = ? and model_lot = ? "
Database error code: "-204"
Could you please let me know what might be the reason for this issue.
Many Thanks in Advance.

Transaction SE11, input ZLICENSE_R2 for table name, and display the table. Did the table display? If not, that is the main problem.
If the table displays, go to menu item Utilities -> Database Object -> Database Utility
In the resulting screen, under the "Status" fields, you should see text "Exists in the database." If you don't, then the table exists in the dictionary, but doesn't exist in the database system. Click the "Create database table" button and then you should be able to run the program.
You may need basis team's help to carryout some of these actions.

Boot image does not exist and cannot read disk label errors.

Hi - I'm having a problem with installing Solaris 9 4/04 on a Netra T1. The Netra already has Solaris 7. I need to get this set up as a jumpstart server but it can't find the boot image. I'm using a brand new bonafide installation disk - not a copy. The system won't let me install/upgrade to Solaris 9 either. I get an error stating that disk label can't be read. I've tried swapping out the CDROM but I still get the same errors. Does anyone know what or why this may be happening? (Oh - and another strange thing - like I said the CDs are the original but there doesn't appear to be a cdrom/cdrom0/s0 directory. The directory I see is cdrom/cdrom0/sol_9_404_sparc/Solaris_9/Tools)
ERROR: Install boot image /cdrom/sol_9_404_sparc/Solaris_9/Tools/Boot does not exist
Check that boot image exists, or use [-t] to
specify a valid boot image elsewhere.
and
Excuting last command: boot cdrom [- nowin]
Boot device: /pci@1f,0/pc1@1/ide/cdrom@2:f file and args: [- nowin]
Can't read disk label.
Can't open disk label package
Evaulating: boot cdrom [- nowin]@1/ide@e/cdrom@2:f File and args: [- nowin]
Can't open boot device
I appreciate any help at all - is there anyone out there who can tell me what I may be doing wrong?
Thanks

Hi check that you are booting of the right cd. Make sure it is soalris 9 software 1/2 if that fails then it may well be that your cd is buggered. most likely it is buggered it it cant find the boot image.

Bursting Problem - A file or directory in the path name does not exist

I'm trying to burst some data via email using the standard DocumentProcessor java code but receiving an error relating, I assume, to an invalid temporary directory. I've checked that the directory exists, as do the data file and control file. By the way I am not running in Apps, just stand alone mode. Any ideas would be much appreciated.
[042308_104249440][oracle.apps.xdo.batch.bursting.FileHandler][EXCEPTION] java.io.FileNotFoundException: /u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp (A file or directory in the path name does not exist.)
at java.io.FileOutputStream.open(Native Method)
at java.io.FileOutputStream.<init>(FileOutputStream.java:205)
at java.io.FileOutputStream.<init>(FileOutputStream.java:96)
at oracle.apps.xdo.template.RTFProcessor.setOutput(Unknown Source)
at oracle.apps.xdo.batch.bursting.FileHandler.rtf2xsl(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessDocument.getXSLFile(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessDocument.processTemplate(Unknown Source)
at oracle.apps.xdo.batch.bursting.ProcessCoreDocument.processLayout(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.addDocument2Queue(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.createBurstingDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstDocument(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.globalDataEndElement(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingRequest(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingEndElement(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.endElement(Unknown Source)
at oracle.xml.parser.v2.XMLContentHandler.endElement(XMLContentHandler.java:196)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java:1212)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:301)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:268)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:201)
at oracle.apps.xdo.batch.BurstingProcessorEngine.burstingConfigParser(Unknown Source)
at oracle.apps.xdo.batch.BurstingProcessorEngine.process(Unknown Source)
at oracle.apps.xdo.batch.DocumentProcessor.process(Unknown Source)
at PIreportburst.bEngine(PIreportburst.java:24)
at PIreportburst.main(PIreportburst.java:51)
-Below is the java code I'm using
public void bEngine(String ctrlFile, String dataFile, String tmpDir) {
try {
DocumentProcessor dp = new DocumentProcessor(ctrlFile,dataFile,tmpDir);
dp.process();
catch (Exception e) {
System.out.println(e);
}

Thanks Ike
Where do you suggest setting the temp directory:
DocumentProcessor("control.xml","data.xml","/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp")
or in the xdo.cfg:
<property name="system-temp-dir">/u02/DIAS/bursting/BIPublisher/tmp/042308_104249338/xdo2.tmp</property>
..and thanks for the link to the BIPublisherIDE
Cheers, Mike

File does not exist: /oa_servlets/AppsLogin-Urgent plz

Hi;
I have r11.5.9 on AIX 5.2 i create one new AIX 5.3 server give same IP and copy all folder from 5.2 to 5.3 wiht exact path.
With same user i can open db+lsnr+apache on new 5.3 server But when i try to login EBS i can see login page also Ebuniess enter link but when i click it it thoruh 404 page can not found
In apache log file i have File does not exist: /oa_servlets/AppsLogin, i can not find pages under $COMMONTOP on 5.2 and my new 5.3 server. But on 5.2 i canlogin system wihtout any issue
All services start wihtout problem also db, i run autoconfig on appstier but when i try to run on dbtier it thotugh error:( I am not sure i need to run autoconfig on dbtier for upper erro)
AutoConfig will consider the custom templates if present.
Using ORACLE_HOME location : /xxx/xxdb/9.2.0
/xxx/xxdb/9.2.0/jdk/bin/jre and /xxx/xxdb/9.2.0/jdk/9.2.0/jdk/bin/java not found Pass option 'java' on command line
and yes there is no such a file like that. How i can solve those problem
thanks

Hussein i cant run autoconfig also preclone on dbtier but apps tier i could run autoconfig and its end wihtout error
http://xx:8001/OA_HTML/jsp/fnd/aoljtest.jsp http://xxx:8001/pls/TEST2/FND_WEB.PING - too
http://xx:8001/aplogon.html
I cant open those too
Fri Sep 17 19:49:00 2010] [error] [ File does not exist: /oa_servlets/AppsLogin
[Fri Sep 17 20:00:01 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=DiscoGroup, it's possible that your configuration file is not correct.
[Fri Sep 17 20:00:01 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=OACoreGroup, it's possible that your configuration file is not correct.
[Fri Sep 17 20:00:01 2010] [error] OPM: EW: Fail to start process with mod=JServ and grp=XmlSvcsGrp, it's possible that your configuration file is not correct.
[Fri Sep 17 20:14:39 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:14:39 2010] [error] [] File does not exist:
[Fri Sep 17 20:14:51 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:14:51 2010] [error] [] File does not exist:
[Fri Sep 17 20:14:55 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:14:55 2010] [error] [] File does not exist:
[Fri Sep 17 20:15:06 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:15:06 2010] [error] [ File does not exist: /servlets/Hello -
[Fri Sep 17 20:15:11 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:15:11 2010] [error] [ File does not exist: /servlets/Hello
[Fri Sep 17 20:15:14 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:15:14 2010] [error] [] File does not exist: /servlets/
[Fri Sep 17 20:15:50 2010] [error] [] File does not exist: /xxxx/portal/oracle/_servlets/Hello
[Fri Sep 17 20:15:59 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:15:59 2010] [error File does not exist: /oa_servlets/Hello
[Fri Sep 17 20:16:15 2010] [error] OPM:Can not find one alive process
[Fri Sep 17 20:16:15 2010] [error] [] File does not exist:
[Fri Sep 17 20:18:04 2010] [error] script not found or unable to stat: /xx\xxora/8.0.6/tools/web60/cgi/ifcgi60

File does not exist on remote site, yet it does

I have been trying to understand how Dreamweaver handles remote files in CS5.
My server is setup as a remote server and a test server.
I open the remote file, it offers to get dependencies, so I click yes.
I click on Live view, then it tries to show me the following url
http://my_site.com/public_html/path/to/my/file/file.php
It should not put public_html in the path, and I did not specify this in my site setup. My root setting is /.
Anyway, If I change the url manually, then it shows correctly. Then it offers to discover dunamically linked files, which I agree to.
Now it tells me that 'Dynamically-related files could not be resolved because the site definition is not correct for this server'
If I try to open one of the files that it has discovered, I am told that it is not on the disk, so would I like to 'get it', so I agree.
Finally, I am told that 'Get operation failed since linked-file.php does not exist on remote site'
I suspect that this is all to do with my site definition, but I fiddled with the settings and can't resolve this. I think that the whole problem goes back to Dreamweaver's insistance on putting public_html in the path, but I can't stop it doing so.
Any suggestions?
Thanks
ian

Hi,
Well, yes I did manage to fix the dynamically linked resources issue. As mentioned above, I did need to mention public_html in my Root Directory setting in server setup (silly of me).
I had tried this at first, but it didn't work, as I had the server set as a test server and not a remote server, anyway, i now have it set as both and all is well.
Except that, the first issue that mentioned is still with me: namely, dreamweaver mentions the public_html in the url path when on live view, which is not correct and I don't know where it is inferring this from. I can change it manually, but this doesn't seem right to me. Am I still missing a setting?
In anwer to the questions:
1) My setting (now) in the Root Directory setting in DW is: /public_html/
2) My actual path on the server (that i mention in php scripts) is: /home/login_name/public_html//path/to/my/file/file.php
[In the advanced settings of DW site setup on the Local Info page I have set Links relative to Document option, although it does not seem to make a difference when I change it to Site Root.]
Any suggestions appreciated.
Thanks
Ian

[Solved] Error : The file or folder path /Probl?me 1 does not exist

Hello,
I encountered this error
The file or folder <path>/Probl?me 2 does not exist
while I was trying to open a directory already extracted from a zip file containing directories with special characters. In this case, it is a "è" that was misinterpreted as a "?".
I searched the forums and on google, the solutions proposed do not work for me. Although, I have to deal with these files written in french, I would like to have my locale in english (US), with a system wide support for special characters.
Attempt 1: Adding the option : iocharset=utf8 into the fstab, like this :
fstab :
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
/dev/fd0 /media/fl auto user,noauto 0 0
/dev/disk/by-uuid/24ba75ac-e52d-40eb-a599-83b394b500b2 /boot ext2 defaults 0 2
/dev/disk/by-uuid/c797f409-00bc-479a-b4d6-ab49943f644b / ext4 defaults 0 1
/dev/disk/by-uuid/668427a8-5f51-42bd-a316-fc7984bf5f4f /var ext4 defaults 0 2
/dev/sda7 swap swap defaults 0 0
/dev/disk/by-uuid/417cd1b7-8f06-414b-84d5-e8714d9646ab /home ext4 defaults 0 2
/dev/disk/by-uuid/ef9aa00e-0515-4d7b-aa23-8096e787250d /usr ext4 defaults 0 2
/dev/disk/by-uuid/17d401b7-2fc7-4d9f-8e17-657d86926d2e /tmp ext4 defaults,iocharset=utf8 0 0 <<<<<<<<<<<<<<
/dev/disk/by-uuid/71e543b6-e06c-4b0e-b1e3-3b491ff1fefe /var/cache/pacman/repos ext4 defaults 0 2
#/dev/sda12 /mnt/archive ext4 defaults 0 2
#.host:/ /mnt/hgfs vmhgfs defaults 0 0
This solution does not work, because after adding iocharset=utf8, in front or after a "defaults", after a reboot, while mounting the filesystem, there is the following error message:
Mounting Locale Filesystem :
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
$ dmesg | tail
phy0: Selected rate control algorithm 'iwl-agn-rs'
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda5): re-mounted. Opts: (null)
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda10): Unrecognized mount option "iocharset=utf8" or missing value <<<<<<<<<<<<<<
EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
Adding 2104476k swap on /dev/sda7. Priority:-1 extents:1 across:2104476k
tg3 0000:07:00.0: irq 44 for MSI/MSI-X
Attempt 2: Changing all the locale features in KDE and in /etc/rc.conf as well.
$ vim /etc/rc.conf
LOCALE="fr_CA.utf8"
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
It is complicated to remove these directories. I had to use the inum to get precisely these directories before removing them.
$ ls -il
total 8
1577566 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 1
1577573 drwxr-xr-x 2 [username] [username] 4096 28 jan 07:09 Probl?me 2
$ find . -inum 1577566 -exec rm -i {} \;
rm: impossible de supprimer « ./Probl\212me 1 »: est un dossier
Note that the hypothetical character 'è' is represented has a '\212', a 'È' if seen as a extended ASCII character.
These directories cannot be deleted this way :
$ rm -r Problème\ 1
rm: cannot remove `Problème 1': No such file or directory
or
$ rm -r ProblÈme\ 1
rm: cannot remove `ProblÈme 1': No such file or directory
What should I do to be make the operating system recognize those special character, and interpret them correctly ?
Last edited by ramboman (2011-01-29 21:45:50)

I found a working solution, but better solution are also welcome
I had to have fr_CA not only in utf8 but also in iso88591. I had to modify the /etc/rc.conf this way :
LOCALE="fr_CA" <<<<<<<<<<<<<<
HARDWARECLOCK=""
TIMEZONE="America/Montreal"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
To preserve the english US language system wide, I had to add the following line in the /etc/profile :
# Allow french special character while in en_US
export LANG=en_US
The character misinterpreted by a "?" is now seen :
as a "è" in dolphin
as a "?" in the console
It is now possible to access the folders.

Error: While Opening a Custom view- Action &OBJECT_ID& does not exist

Hi Experts,
On the click of button, I am creating a window and opening as follows:
wd_comp_controller->go_window         = lo_window_manager->create_window(
                      window_name            = 'ZW_CERTIFICATION_POP'
                      title                  = lv_pop_title
                      close_in_any_case      = abap_false
                      message_display_mode   = if_wd_window=>co_msg_display_mode_selected
                      close_button           = abap_true
                      button_kind            = if_wd_window=>co_buttons_okcancel
                      message_type           = if_wd_window=>co_msg_type_none
I have written following code in INIT method of View to Subscribe events but it is dumping with the Error "Action &OBJECT_ID& does not exist ".
DATA lv_ok     type string.
DATA lv_cancel type string.
DATA lo_popup TYPE REF TO if_wd_window.
DATA lo_view   TYPE REF TO if_wd_view_controller.
DATA lo_window_ctlr type ref to if_wd_window_controller.
register button events
    lo_view = wd_this->wd_get_api( ).
    lo_window_ctlr = lo_view->get_embedding_window_ctlr( ).
    wd_comp_controller->go_window = lo_window_ctlr->get_window( ).
    lv_ok = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/OK' ).
    wd_comp_controller->go_window->subscribe_to_button_event(
                   button            = if_wd_window=>co_button_ok
                   button_text       = lv_ok
                   action_name       = 'OK'
                   action_view       = lo_view
                   is_default_button = abap_true
    lv_cancel = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/CANCEL' ).
               wd_comp_controller->go_window->subscribe_to_button_event(
                  button            = if_wd_window=>co_button_cancel
                  button_text       = lv_cancel
                  action_name       = 'CANCEL'
                  action_view       = lo_view
                  is_default_button = abap_true
How to solve this exception causing application to dump.
Thanks
Depesh

Hi Depeshn,
I have written following code in INIT method of View
I think you have writen code containg subscribe_to_button_event method in the INIT method of the pop up view. But actually you should write that code where you are generating the pop up window. i.e in the ONACTION method of the button (which when clicked generates the pop up window.)
It should be something like this:
" This whole code should come in the event handler of the button.
wd_comp_controller->go_window = lo_window_manager->create_window(
window_name = 'ZW_CERTIFICATION_POP'
title = lv_pop_title
close_in_any_case = abap_false
message_display_mode = if_wd_window=>co_msg_display_mode_selected
close_button = abap_true
button_kind = if_wd_window=>co_buttons_okcancel
message_type = if_wd_window=>co_msg_type_none
DATA lv_ok type string.
DATA lv_cancel type string.
DATA lo_popup TYPE REF TO if_wd_window.
DATA lo_view TYPE REF TO if_wd_view_controller.
DATA lo_window_ctlr type ref to if_wd_window_controller.
* register button events
lo_view = wd_this->wd_get_api( ).
lo_window_ctlr = lo_view->get_embedding_window_ctlr( ).
wd_comp_controller->go_window = lo_window_ctlr->get_window( ).
lv_ok = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/OK' ).
wd_comp_controller->go_window->subscribe_to_button_event(
button = if_wd_window=>co_button_ok
button_text = lv_ok
action_name = 'OK'
action_view = lo_view
is_default_button = abap_true
lv_cancel = cl_wd_utilities=>get_otr_text_by_alias( alias = 'PAOC_RCF_UI/CANCEL' ).
wd_comp_controller->go_window->subscribe_to_button_event(
button = if_wd_window=>co_button_cancel
button_text = lv_cancel
action_name = 'CANCEL'
action_view = lo_view
is_default_button = abap_true
I hope it helps.
Regards
Arjun

Error while transporting - Source RSDS 8ZRF_O01 LOGDBQ151 does not exist

Hi,
I am getting following error while transporting export DataSource to quality system.
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)
No rule exists
Source RSDS 8ZRF_O01 LOGDBQ151 does not exist
Start of the after-import method RS_DTPA_AFTER_IMPORT for object type(s) DTPA (Activation Mode)
Transformation does not exist (see long text)
Although, the request is failing, I can see the DataSource 8ZRF_O01 present in the QA system. Only the transformation is set inactive.
Regards,
Pranav.
Edited by: P D on Sep 20, 2010 9:02 AM

Hi
might be your data source not collected into transport request.
If you are moving data source from once system to other system, this may missed.
RSA1->Transport connection>all objects>Datasource --> Select your data source as only neecessary to move
When ever we are moving objects from one system to other follow below are order to avoid failures
1).New Infoobjects.
2). Data source/Infosource
3). Info Providers ( Cube/DSo)
4). Update rules/Transformation
5).Impacted objects and other
Mahesh.

The name '' does not exist in the current context

I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally this
has also happened during normal debbuging of running code on my machine.
I have included 2 screen shots. The first is when it is working. I have a break point set at the declaration of list of types. At this point all my variables are still reporting their values back to the debugger. Once I step over this to the next line (screen
shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
This problem is annoying me to no end. If anyone has any insight as to why this might be happening I would be very much appreciative.
My Settings/Configuration
Using Visual Studio 2013 Premium (Version 12.0.31101.00 Update 4)
Projects are all set to Target Framework = .NET 4.5.1
Resharper 9.1 is installed
My active configuration is debug mode, Any CPU
My PC is 64bit and so is the O/S windows 8.1
All of my projects are also compiled and built in debug mode
For all my projects configuration debug has the Optimize Code check box unchecked
I am unit testing code in an outside project referenced by the unit testing project (standard unit test project setup)
I make use of the latest version of NSubstitute in my tests although I do not think that would have any bearing on this issue
I omitted the code following the error because it is not relevant. I had cut it out and replaced it with a Task.Delay(4) which resulted in the same issue.
What I have tried so far
I have tried debugging the unit test from Visual Studio Test Explorer instead of from Resharper with the same result.
If I remove 2 items at the end of the array it starts to work again (so 6 items initialized instead of 8)
I clean solution with rebuild has no effect
Removing properties of the array also seems to work, example remove all initialization of property Value
Mark as answer or vote as helpful if you find it useful | Igor

Hi IWolbers,
>>I have a recurring problem where all of a sudden I can no longer see the values of my variables when I debug my unit tests. I cannot find a pattern as to when this happens but I experience this across one of every 20 tests that I write. Occasionally
this has also happened during normal debbuging of running code on my machine.
So you mean that it worked well before, am I right?
If you debug the same app in other VS machine, does it work well? So we could make sure that whether it is related to the VS IDE.
Please disable all add-ins in your VS IDE, and then reset your VS settings, debug it again.
https://msdn.microsoft.com/en-us/library/ms247075(v=vs.100).aspx
Or you could run your VS in safe mode, debug it again, at least, we could know that whether it is the add-in's issue.
https://msdn.microsoft.com/en-us/library/ms241278.aspx
To make sure that it is not the project files' issue, create a new blank solution, copy the project files to the new solution, clean and rebuild the solution, check the result.
>>Once I step over this to the next line (screen shot 2) I get the error message 'The name '[variable name]' does not exist in the current context'
How about debugging it with "Step Into" instead of "Step Over"? Or you could add breakpoints between 234 line to 241 line, after the breakpoint is hit, check the watch window again. How about the result?
In addition, do you check other debugger window like local or others?
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Sysman does not exist

Similar Messages

Maybe you are looking for