Sysprep and Capture Task Sequence Fails "Can not find script file C:\LTIBootstrap.vbs"

I've just installed Windows 8 on a Lenovo ThinkPad T440s using Lenovo's recovery discs. I did not join it to a domain. I logged in as Administrator, navigated to our deployment share, and ran Scripts\LiteTouch.wsf. I selected the new Sysprep and Capture
Task Sequence that I just made, told it to upload to DeploymentShare$\Captures, then started the Task Sequence.
It seemed to run fine until after the first reboot. Windows 8 configured the PC for a while, then displayed an error that it had been shut down unexpectedly. I wasn't sure if this was normal, so I just clicked OK. Then I got an error that said "Can
not find script file C:\LTIBootstrap.vbs". After clicking OK on that, I am brought to the desktop.
The image cannot be found in DeploymentShare$\Captures. Under the Monitoring section of the DeploymentWorkbench, I can see that MDT thinks the Task Sequence is still running on the machine (though it is not), with progress stuck on step 16 of 23: Execute
Sysprep. There are 0 errors and 0 warnings listed.
BDD.log is too long to post all of it, but here's the last few lines in case that's helpful.
<![LOG[BCD> The operation completed successfully.]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Run Command: C:\windows\SYSTEM32\bcdedit.exe /default {d22e7e91-9ee7-46eb-89d7-c5859e4302f0}]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCD> The operation completed successfully.]LOG]!><time="11:20:35.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[BCDEdit returned ErrorLevel = 0]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Property BootPE is now = True]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[LTI Windows PE applied successfully]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41019 sent: LTI Windows PE applied successfully]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[LTIApply processing completed successfully.]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
<![LOG[Event 41001 sent: LTIApply processing completed successfully.]LOG]!><time="11:20:36.000+000" date="12-26-2014" component="LTIApply" context="" type="1" thread="" file="LTIApply">
I would greatly appreciate any assistance determining what went wrong and how to correct it. Thank you.

You might get teh c:\LTIBootStrap.vbs error if you are running SysPrep with a unattend.xml template that contains the c:\bootstrap.vbs template, yet you are *NOT* deploying the image with MDT Litetouch, instead just applying the image to the final machine.
Crack open your install.wim file and search for the unattend.xml file in the normal places to see what it is.
I am concerned about the "shut down unexpectedly" error. There should be no shutdown state information left from a captured *.wim file.
If you still need assistance, please feel free to copy the bdd.log file to a public site like OneDrive, and share the link.
Keith Garner - Principal Consultant [owner] -
http://DeploymentLive.com

Similar Messages

Trying to install iTunes 8.0, can not find script file error

I recently tried to upgrade Win XP for iTunes 8.0, and got the following error msg:
can not find script file “C:\program files\uninstall scripts\quicksilver player 7.4\install.wsf”
HELP!
Tony

Hey Tony, you don't happen to work for a large aerospace company, do you? My guess is that you do, because I work at the same place, and the problem is with our company's distribution of quicktime. email me off list and I'll tell you how to fix it.
bralston at mac dot com

Error on boot: "Can not find script file "C:\ProgramData\Lenovo-20841.vbs".

Recently I'm getting an error dialog box on my T530 when I boot it into my OEM installation of Windows 8. The window title bar is "Windows Script Host", and the error message is:
Error on boot: "Can not find script file "C:\ProgramData\Lenovo-20841.vbs".
I pulled up an old backup, and I do have that file, along with a number of other ones that are missing from that directory. I'm attaching a screenshot of the files that are missing. Not sure why they would have been deleted (I know I didn't do it manually). Should I just restore the file? What about the other ones?
Thanks very much.

I am getting a different VBS script error than the one listed above.
Does anyone know how I can get this file? or recreate it?
I get a similar message saying that it can't find the file c:\programdata\Lenovo-11472.vbs
Also, my wireless just randomly resets - sometimes very few minutes - after I've been using the system for a while. It's brand new and I can't figure out what's going on. Could this be the issue?
When I restart, it stays stable for a while and then starts acting up again.
Thanks for your help!

Administrator Account Disabled after sysprep and capture task sequence in MDT 2010

Hi
We are currently migrating from Windows XP to windows 7. As part of our migration we have 5 base Images (for different areas of the business)
Here is what we are doing:
Create a reference machine with the source files for windows 7 Pro x86
Install applications as part of the Task sequence to build a reference machine.
Make the updates to the machine - required for the build.
Run the Sysprep and capture template to take the capture of the Reference machine.
Import the Capture into the Operating system folder within MDT2010
Create a task sequecne to deploy the image.
Deploy the Image for Testing.
Deploy the image to a machine
Update the machine with the defects
Re Capture the deployed machine and call it ver2.wim
re deploy ver2.wim
Testers test
Defects logged + additional user settings to be captured in the build
Re capture and sysprep runs says the capture has been succesful however after a reboot the administrator account is disabled.
We cant seem to capture anything from here on in. Nothing has been changed in the unattend.
Autologon is set to enable the administrator account and the password is set to blank as this is then handled by policy when the machine is joined to the domain - we have not enabled the unattended join to the domain at this point in time but it will be
for deploying the image.
Have we got our image strategy wrong? does the same rule apply about sysprep running more than 3 times on a single machine if it is captured and redeployed after a sucessfully sysprep to the same hardware or even different hardware.

Hi,
    One of the things Sysprep/WAIK do is disable the adminsitrator account.
    You mentioned that you are setting the autologing to the administrator account and that you are setting it with a blank password, you can add a simple command in to sysprep's xml to reenable the account:
<component name="Microsoft-Windows-Deployment" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Order>1</Order>
<Path>net user administrator /active:yes</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
   Give it a try and let us know .
Best Regards, Marianok
Saludos, MarianoK
Disclaimer: While I do my best to make sure everything I post is accurate and safe, I’m certainly not perfect so all this information is provided "AS IS" with no warranties or guarantees and confers no rights. Any suggested steps or code provided should be
done under your own risk, I take no responsibilities if your system blows, the universe stops spinning, o nor for any other adverse consequence the information on this code might cause directly or indirectly.
Aclaración: Aunque hago lo posible por verificar que todo lo que posteo es correcto y seguro, Yo ciertamente no soy perfecto y puedo cometer errores, por lo tanto esta informacion es provista "AS IS" / "Como Está" sin garantía alguna y no le confiere ningún
derecho. Cualquier instrucción descripta o código incluido deben ser empleados bajo su propia responsabilidad y bajo su propio riesgo. No me hago responsable si sus datos se dañan, su si
Hi Marianok,
Thanks for your response and taking the time to read the topic we have raised. We believe we already have this step in place but perhaps we have it in the wrong area of the unattend.
Please find below our unattend file for the capture:
<?xml version="1.0" encoding="utf-8"?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
<settings pass="windowsPE">
<component name="Microsoft-Windows-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ImageInstall>
<OSImage>
<WillShowUI>OnError</WillShowUI>
<InstallTo>
<DiskID>0</DiskID>
<PartitionID>1</PartitionID>
</InstallTo>
<InstallFrom>
<Path>.\Operating Systems\Windows 7 Install Media x86\Sources\install.wim</Path>
<MetaData>
<Key>/image/index</Key>
<Value>1</Value>
</MetaData>
</InstallFrom>
</OSImage>
</ImageInstall>
<UpgradeData>
<Upgrade>false</Upgrade>
</UpgradeData>
<Display>
<ColorDepth>16</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<ComplianceCheck>
<DisplayReport>OnError</DisplayReport>
</ComplianceCheck>
<UserData>
<AcceptEula>true</AcceptEula>
<ProductKey>
<Key></Key>
</ProductKey>
</UserData>
</component>
<component name="Microsoft-Windows-International-Core-WinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<SetupUILanguage>
<UILanguage>en-US</UILanguage>
</SetupUILanguage>
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="generalize">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
</settings>
<settings pass="specialize">
<component name="Microsoft-Windows-UnattendedJoin" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<Identification>
<Credentials>
<Username></Username>
<Domain></Domain>
<Password></Password>
</Credentials>
<JoinDomain></JoinDomain>
<JoinWorkgroup></JoinWorkgroup>
<MachineObjectOU></MachineObjectOU>
</Identification>
</component>
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<ComputerName></ComputerName>
<ProductKey></ProductKey>
<RegisteredOrganization>OurCompanyNameHere</RegisteredOrganization>
<RegisteredOwner>Windows User</RegisteredOwner>
<TimeZone></TimeZone>
<DoNotCleanTaskBar>true</DoNotCleanTaskBar>
</component>
<component name="Microsoft-Windows-IE-InternetExplorer" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Home_Page>about:blank</Home_Page>
<IEWelcomeMsg>false</IEWelcomeMsg>
</component>
<component name="Microsoft-Windows-Deployment" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<RunSynchronous>
<RunSynchronousCommand wcm:action="add">
<Description>EnableAdmin</Description>
<Order>1</Order>
<Path>cmd /c net user Administrator /active:yes</Path>
</RunSynchronousCommand>
<RunSynchronousCommand wcm:action="add">
<Description>UnfilterAdministratorToken</Description>
<Order>2</Order>
<Path>cmd /c reg add HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v FilterAdministratorToken /t REG_DWORD /d 0 /f</Path>
</RunSynchronousCommand>
</RunSynchronous>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
<component name="Microsoft-Windows-TapiSetup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<TapiConfigured>0</TapiConfigured>
<TapiUnattendLocation>
<AreaCode>""</AreaCode>
<CountryOrRegion>1</CountryOrRegion>
<LongDistanceAccess>9</LongDistanceAccess>
<OutsideAccess>9</OutsideAccess>
<PulseOrToneDialing>1</PulseOrToneDialing>
<DisableCallWaiting>""</DisableCallWaiting>
<InternationalCarrierCode>""</InternationalCarrierCode>
<LongDistanceCarrierCode>""</LongDistanceCarrierCode>
<Name>Default</Name>
</TapiUnattendLocation>
</component>
<component name="Microsoft-Windows-SystemRestore-Main" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DisableSR>1</DisableSR>
</component>
</settings>
<settings pass="oobeSystem">
<component name="Microsoft-Windows-Shell-Setup" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State">
<UserAccounts>
<AdministratorPassword>
<Value>QQBkAG0AaQBuAGkAcwB0AHIAYQB0AG8AcgBQAGEAcwBzAHcAbwByAGQA</Value>
<PlainText>false</PlainText>
</AdministratorPassword>
<LocalAccounts>
<LocalAccount wcm:action="add">
<Description>Temp account</Description>
<DisplayName>Temp account</DisplayName>
<Group>Users</Group>
<Name>TempAccount</Name>
</LocalAccount>
</LocalAccounts>
</UserAccounts>
<AutoLogon>
<Enabled>true</Enabled>
<Username>Administrator</Username>
<Domain></Domain>
<Password>
<Value>UABhAHMAcwB3AG8AcgBkAA==</Value>
<PlainText>false</PlainText>
</Password>
<LogonCount>999</LogonCount>
</AutoLogon>
<Display>
<ColorDepth>32</ColorDepth>
<HorizontalResolution>1024</HorizontalResolution>
<RefreshRate>60</RefreshRate>
<VerticalResolution>768</VerticalResolution>
</Display>
<FirstLogonCommands>
<SynchronousCommand wcm:action="add">
<CommandLine>cscript.exe C:\MININT\Scripts\LiteTouch.wsf /start</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>1</Order>
</SynchronousCommand>
<SynchronousCommand wcm:action="add">
<CommandLine>cscript.exe D:\MININT\Scripts\LiteTouch.wsf /start</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>2</Order>
</SynchronousCommand>
<SynchronousCommand wcm:action="add">
<CommandLine>cscript.exe E:\MININT\Scripts\LiteTouch.wsf /start</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>3</Order>
</SynchronousCommand>
<SynchronousCommand wcm:action="add">
<CommandLine>cscript.exe F:\MININT\Scripts\LiteTouch.wsf /start</CommandLine>
<Description>Lite Touch new OS</Description>
<Order>4</Order>
</SynchronousCommand>
</FirstLogonCommands>
<OOBE>
<HideEULAPage>true</HideEULAPage>
<NetworkLocation>Work</NetworkLocation>
<ProtectYourPC>1</ProtectYourPC>
<SkipUserOOBE>true</SkipUserOOBE>
</OOBE>
<RegisteredOrganization>Ourcomapanynamehere</RegisteredOrganization>
<RegisteredOwner>Windows User</RegisteredOwner>
<TimeZone></TimeZone>
</component>
<component name="Microsoft-Windows-International-Core" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<InputLocale>0409:00000409</InputLocale>
<SystemLocale>en-US</SystemLocale>
<UILanguage>en-US</UILanguage>
<UserLocale>en-US</UserLocale>
</component>
</settings>
<settings pass="offlineServicing">
<component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="x86" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<DriverPaths>
<PathAndCredentials wcm:keyValue="1" wcm:action="add">
<Path>\Drivers</Path>
</PathAndCredentials>
</DriverPaths>
</component>
</settings>
<cpi:offlineImage cpi:source="catalog://pr-dep-03/captureshare$/operating systems/windows 7 install media x86/sources/install_windows 7 professional.clg" xmlns:cpi="urn:schemas-microsoft-com:cpi" />
</unattend>
Hope this helps!

Build and Capture task sequence fails at 'Prepare ConfigMgr Client for Capture' step

The scenario is as follows:
Task Sequence is a Build and Capture of Windows 7 SP1 x64 Enterprise
There are 17 Applications installed split into 2 'Install Application' steps due to the 9 item limit
129 Software Updates are installed
SCCM 2012 RTM
I have built and captured on this system previously however there were no 'applications', just traditional SCCM 'packages'
All task sequence steps run successfully until it gets to the 'Prepare ConfigMgr Client for Capture' step and it fails here. Here are the relevant parts of the SMSTS.log file:
<![LOG[No certificates to delete]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:1013">
<![LOG[Deleting Client properties from file C:\Windows\SMSCFG.INI succeeded.]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:922">
<![LOG[Reseting the Trusted Root Key successful]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:1088">
<![LOG[Deleting instance of 'CCM_Client' successful]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:170">
<![LOG[Successfully reset Registration status flag to "not registered"]LOG]!><time="15:30:12.531-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:309">
<![LOG[Successfully disabled provisioning mode.]LOG]!><time="15:30:12.546-660" date="11-13-2012" component="PrepareSMSClient" context="" type="1" thread="2880" file="preparesmsclient.cpp:1273">
<![LOG[Start to cleanup TS policy]LOG]!><time="15:30:12.546-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880" file="utils.cpp:2773">
<![LOG[getPointer()->ExecQuery( BString(L"WQL"), BString(pszQuery), lFlags, pContext, ppEnum ), HRESULT=ffffffff (e:\nts_sccm_release\sms\framework\core\ccmcore\wminamespace.cpp,389)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient"
context="" type="0" thread="2880" file="wminamespace.cpp:389">
<![LOG[ns.Query(sQuery, &spEnum), HRESULT=ffffffff (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,2800)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880" file="utils.cpp:2800">
<![LOG[Wmi query 'select * from CCM_Policy where PolicySource = 'CcmTaskSequence'' failed, hr=0xffffffff]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="3" thread="2880" file="utils.cpp:2800">
<![LOG[End TS policy cleanup]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880" file="utils.cpp:2821">
<![LOG[TS::Utility::CleanupPolicyEx(false), HRESULT=ffffffff (e:\nts_sccm_release\sms\client\osdeployment\preparesmsclient\preparesmsclient.cpp,457)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880"
file="preparesmsclient.cpp:457">
<![LOG[Failed to delete policies compiled by TaskSequence (0xffffffff)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="3" thread="2880" file="preparesmsclient.cpp:457">
<![LOG[Failed to prepare SMS Client for capture, hr=ffffffff]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="3" thread="2880" file="preparesmsclient.cpp:472">
<![LOG[pCmd->Execute(), HRESULT=ffffffff (e:\nts_sccm_release\sms\client\osdeployment\preparesmsclient\main.cpp,136)]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="0" thread="2880" file="main.cpp:136">
<![LOG[Failed to prepare SMS Client for capture, hr=ffffffff]LOG]!><time="15:35:21.000-660" date="11-13-2012" component="PrepareSMSClient" context="" type="3" thread="2880" file="main.cpp:136">
<![LOG[Process completed with exit code 4294967295]LOG]!><time="15:35:21.015-660" date="11-13-2012" component="TSManager" context="" type="1" thread="2152" file="commandline.cpp:1098">
<![LOG[!--------------------------------------------------------------------------------------------!]LOG]!><time="15:35:21.015-660" date="11-13-2012" component="TSManager" context="" type="1" thread="2152" file="instruction.cxx:3011">
<![LOG[Failed to run the action: Prepare ConfigMgr Client for Capture.
Unknown error (Error: FFFFFFFF; Source: Unknown)]LOG]!><time="15:35:21.046-660" date="11-13-2012" component="TSManager" context="" type="3" thread="2152" file="instruction.cxx:3102">
It looks like there is a similar issue over here (http://www.windows-noob.com/forums/index.php?/topic/5906-task-sequence-error-0xffffffff/) that was resolved by removing the Application Installations one by one until a problematic one was found
and removed - however I would rather avoid this very time consuming process if possible.
I have also testing this using 'capture media' in the full OS and that also fails at the same step with the same errors in the smsts.log
The only workaround I have for now is to let the task sequence fail at the 'Prepare ConfigMgr Client for Capture' step, then I uninstall the SCCM client using 'ccmsetup.exe /uninstall' and use the 'capture media' method - obviously with no SCCM client installed,
it skips the 'Prepare ConfigMgr Client for Capture' step and goes straight to the 'Prepare OS' step and then to the actual capture to the WIM step.
Anybody else seeing this or have any suggestions?
My Microsoft Core Infrastructure & Systems Management blog -
blog.danovich.com.au

It looks like there is a similar issue over here (http://www.windows-noob.com/forums/index.php?/topic/5906-task-sequence-error-0xffffffff/) that was resolved by removing the Application Installations one by one until a problematic one was found
and removed - however I would rather avoid this very time consuming process if possible.
You dont have to test it 18 times....
Just test with 50% of the applications first, if it fails, test with 25% and then on of the time...
You should be able to find the application, within 4-5 tests...
Ronni Pedersen | Microsoft MVP - ConfigMgr | Blogs:
http://www.ronnipedersen.com/ and SCUG.dk/ | Twitter
@ronnipedersen

Windows 7 64bit Build and Capture Task Sequence keeps failing. Need to Offline Patch

Hi All,
I have been having problems running my SCCM 2007 R3 Build and Capture Task Sequence for Windows 7 64bit since MS released the October 2014 patches. (Having problems described in KB2894518, but can't get workaround to work)
So my next step is to try to apply the patches directly to the install.wim file using dism and "Offline Servicing". I'm hoping this will allow my TS to finish, and also adds the benifit of making my TS much faster to run every month. So I followed
the steps in
this post, and injected 165 updates into the install.wim file (extracted from Win7 ISO). Now, I've copied the updated WIM into my Operating System install package and updated the distribution point. But the Install Software Updates step still installs 160
updates (same as before the Offline patch injection). The only thing that seems faster is that the download of the updates is instantaneous. So it seems like the Offline patch injection just copied the patch installer files to the WIM, but did not actually
install them.
I remember reading a post by Niall C. Brady or Jason Sandys about exactly how they inject patches into a WIM, but have been unable to re-locate the post. Does anybody out there have a tried and true method for offline injection of patches into install.wim
for use with SCCM Build and Capture task sequence? thanks!

My recommendation would be to use MDT to build your images instead:
http://technet.microsoft.com/en-us/library/dn744290.aspx
This will make your life much easier with the patching of the image :)
You can use Nickolaj's great MDT Factory tool to set up an MDT Build machine from scratch:
https://gallery.technet.microsoft.com/MDT-Factory-Tool-100-8e68123b
Blog: www.danielclasson.com/blog |
LinkedIn:
Daniel Classon | Twitter: @danielclasson

Build & capture task sequence fails during software update installation

I'm sure this has been discussed a thousand times already, so I hope no one minds talking about it at least one more time. About 6 months ago I created a reference image using a build and capture task sequence within SCCM. After discovering
there were certain updates that would kill a task sequence (because they required multiple restarts), I was able to exclude these updates from deployment so that my task sequence completed successfully. Fast forward to today. I'm working on updating
our reference image to include the last 6 months of updates. Again, I'm having trouble with the task sequence failing to complete. I have excluded all of the updates mentioned in
Microsoft KB article 2894518. I'm able to build the image with all software updates up until 6/30/2014. When I deploy my software group that contains updates from 7/1/2014 to 12/31/2014,
however, the task sequence fails. I'm pulling my hair out trying to figure out which update may be causing the issue, and trust me, I don't have much hair as it is. So, here's my question to all of the experts out there. What is the best
method of debugging this issue and finding which update may be the culprit? The log files really are confusing, so I'm hoping there are some common codes or phrases I can search for within those files. Any and all help is much appreciated. Thanks...

> I'm working on updating our reference image to include the last 6 months of updates.
Since this is a Build & Capture task sequence and not joined to the domain, you'll need to treat it
like a workgroup computer. Here are the big three things that usually trip things up:
1. Initial Management Point: The Setup Windows and ConfigMgr step should have the SMSMP=<fqdn>
property specified, as the device won't be able to see the list of MP's in Active Directory
2. Content Location: Make sure the reference machine's IP address falls within an IP Range
or Subnet ID boundary, since it can't use a AD Site boundary as a workgroup machine.
3. Win 7 - NTLM Fallback: Windows 7 devices may need
hotfix KB2522623 installed (as a package/program or with offline servicing) to ensure they fall back to NTLM properly when they fail to authenticate with Kerberos.
If you have those 3 things taken care of, then you should copy all the logs off of the machine while the
error message is still being displayed, zip them, and then share them out through OneDrive or Dropbox.
I hope that helps,
Nashs
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you found a bug or want the product to work differently,
share your feedback.
<-- If this post was helpful, please click the up arrow or propose as answer.

WLAN driver fails to install on G580 Windows 7 x64 with error "BCM4313: Can not find setup file"

Summary:
I have installed Windows 7 Ultimate x64 on my G580. Everything is working fine except the WLAN driver fails to install with the error "BCM4313: Can not find setup file".
Details:
I bought lenovo G580 with Windows 8. Since my parents are not comfortable with the learning curve of Win 8, I successfully downgraded to Windows 7 Ultimate x64. Everything is working fine but my WLAN card is not recognized because of lack of driver.
The lenovo parts look-up page says I have broadcom WLAN card - CBT BCM4313 MOW HMC WLAN
I looked at lenovo driver downloads site and tried following driver files for Windows 7 and both of them failed to install with the following error. I tried installing other WLAN drivers also but they won't even install as required hardward is not there.
Error - "BCM4313: Can not find setup file"
Drivers Tried:
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028105
- http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS028208
Any help about how to get past this error will be appreciated. The previous Widnows verison (Windows 8) is still on my hard-drive as windows.old folder. Let me know if I can copy a specific file from there.
Thank you.
BJS
Solved!
Go to Solution.

Download this driver bcm4313
Start setup and extract the files.After that go to star menu/control panel/system/device manager.There you probably find out that network adapter driver is missing.Choose it and click with right mb for drop menu to show up.Select properties then Driver/Update Drivers...Select to load driver from computer hard drive and choose the path where extract files is.Default path is main partion C: and search for directory named Driver.
And yes...you get "Can not find setup file" error but dont worry.Files needed to instal driver are extract fine.

I downloaded 4.0 but it won't install. It keeps saying Extraction Failed Can not open output file. HELP!

Download of the new 4.0 won't install. It keeps saying Extraction Failed Can not open output file.

Oh? That's "reset youtr laptop"?
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

I am trying to find jag meltdown the 2 part to the end of jag and beginning of ncis I can not find anything even wiki would like to download the episode can not find on itunes if possible otherwise is harem found guilty?

i am trying to find jag meltdown the 2 part to the end of jag and beginning of ncis I can not find anything even wiki would like to download the episode can not find on itunes if possible otherwise is harem found guilty?

i am trying to find jag meltdown the 2 part to the end of jag and beginning of ncis I can not find anything even wiki would like to download the episode can not find on itunes if possible otherwise is harem found guilty?

I've purchased 3 bundle movie packages, Sherlock Holmes, Batman, and The Godfather, I am can not find them in my itunes. I can only see the first movie in the series.

I've purchased 3 bundle movie packages, Sherlock Holmes, Batman, and The Godfather, I am can not find them in my itunes. I can only see the first movie in the series.

First of all, you should always save you photos on computer like any other digital camera.
Backup on iCloud or iTunes only backup your Camera Roll. The other photos should be already on the computer.
Note: Photos are not saved in iTunes, it's only a conduit between your iPhone and your photo managing software on computer.
What computer do you have?

Trying to load 4.o and get this message "can not find archive file"

Trying to install 4.0 and get the following message:
can not find archive file

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

Had to uninstall Firefox, now I can't reinstall. Get error message "Can not find archive file." Please help!

I believe I had some kind of virus attack. I got everything cleaned up. (I HOPE) In the process of cleaning the virus, I unintalled Firefox because it wouldn't open. Kept getting the error message that Firefox was already open and I had to close out of the sessions or restart the computer. After restarting the computer several times and not being able to find any open sessions in task manager, I uninstalled. When trying to reinstall, I get the error message "can not find archive file." I've tried downloading Firefox from cnet as well as the Mozilla site to no avail. Please help. I'm getting tired of using Chrome already!

Hello,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
'''Note:''' You might want to print these steps or view them in another browser.
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
#Delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!
Thank you.

Help:Can not find the file in jar!

Hello everyone:
I build a project using Netbeans 5.0 and make a jar file with it...
The code in the project as follows will throw an exception described that it can not find the file named datasource-config.xml
String dataFilePath = getClass().getResource(dataFile).getPath();
//System.out.println("filepath:"+dataFilePath);
InputStream input = new FileInputStream(dataFilePath);
when I run the project with the main() function as an entry it works perfectly and output:
filepath:/C:/projects/java_project/search/build/classes/com/cn/wxjt/lucene/config/datasource-config.xml
But when I compressed the project with jar and run it , it will show:
filepath:file:/C:/projects/java_project/search/dist/search.jar!/com/cn/wxjt/lucene/config/datasource-config.xml
there is a (!) between search.jar and /com/cn/wxjt...
I dont know why I generate a ! symbol in the file path... Is it cause the exception->
java.io.FileNotFoundException: file:\C:\projects\java_project\search\dist\search.jar!\com\cn\wxjt\lucene\config\datasource-config.xml
If you have any idea, plz tell me.
Thank you and best wishes to you !
:)

If the file you want to read is in your jar file, use
getClass ().getResourceAsStream
(relative_path_file_name)Hope that help,
Jackhey jack i want to open the file as new File
i m using this.getClass().getResource("resource/backend.xml");
the resource is the directory inside the jar file.
when i prints the url it shows:
the jar file is in the WORK directory
URL : jar:file:/home/neeraj/WORK/show.jar!/resource/backend.xml
now when i creates new File using the url.getFile() method the file does not exist.
although the same programs runs well when i uses the InputStream
so plz tell me cant I create a new File from the above method????
thanks in advance
with regards
neeraj

I have transferred a load of files from my PC to my iMac using the migration assistant. The message on both machines say that the process was successful bu tI can not find the files on the mac. Any ideas?

I have transferred a load of files from my PC to my iMac using the migration assistant. The message on both machines say that the process was successful but I can not find the files on the mac. Any ideas?

When you use Migration Assitant it creates another user account and puts your files there. Please log out of your normal account and log into the new account. Had you use Setup Assistant when it asked if you were migrating that would not have occured. You have a couple of options, combine the two accounts (not recommended) or start over, use Setup Assistant and have everything in one user account. Here is a link to Pondin's guide for Lion Setup Assistant tips however if you want to combine the two accounts he has addressed that in
http://pondini.org/OSX/Transfer.html

Sysprep and Capture Task Sequence Fails "Can not find script file C:\LTIBootstrap.vbs"

Similar Messages

Maybe you are looking for