SYST: Abnormal termination (T_ANLB not equal to T_ANLC)

Dear All,
I have seen that this topic has already discussed here for several times but i could not find my case.
When I try to change fiscal year, I get error message that some assets are not complete. I try to change the asset from as02 but I get the following error :
SYST: Abnormal termination (T_ANLB not equal to T_ANLC)
Message no. AA698
Internal tables T_ANLB and T_ANLC of asset are not synchronous.
When I analysed table ANLC I saw that expired useful life is filled with values, but I can not see these values in AS02. Maybe this is the cause for problem but I could not find a solution yet.
I also checked fiscal years in these tables but they are the same.
Does anybody encountered and solved this kind of problem?
Best regards

Hi,
I might ask you to check if the following link is useful for you.
Error AS02 AA 698 - SYST: Abnormal termination ... | SCN
best regards Bernhard

Similar Messages

SYST: Abnormal termination (ANLB-LGJAN not equal to ANLC-GJAHR)

Hi All
An asset got scrapped in 2009 and having an unplanned depn value for $100 which resultedi n negative NBV of -100.
This is impact closing of 2009 and opening 2011,
I am trying to post Manual depn (TT 640) in dec 2010 dated, but getting below error :
"SYST: Abnormal termination (ANLB-LGJAN not equal to ANLC-GJAHR) Asset NL010000002004510000
Internal tables ANLB-LGJAN and ANLC-GJAHR of asset NL010000002004510000 are not synchronous
I checked SDN and below listed message is similar to my error, but i am not able to understand much of the below message, m y understanding is there is no FY 2010 in table ANLC which is causing this error.
Could clarify on what steps needs to be done ?
How to syncronize ANLB-LGJAN and ANLC-GJAHR

Hi Aravind,
most of the time it is one of the following reasons from the link you have found.
another link with examples: Error AS02 AA 698 - SYST: Abnormal termination (T_ANLB not equal to T_ANLC)
1) Are the table fields T093C-LGJAHR, ANLB-LGJAN and ANLC-GJAHR in line
Example for a inconsistency:
T093C-LGJAHR: 2010
ANLB-LGJAN and ANLC-GJAHR: 2009
Solution: Repeat fiscal year change
2) Is table-field T082AVIEWB-AUTHORITY on 0 instead on 2
Example:
MANDT FIAA_VIEW AFAPL AFABER AUTHORITY
100..... . 01..... . ABC ..... . 01..... . 2
100..... . 01..... . ABC ..... . 02 ..... . 2
100..... . 01..... . ABC ..... . 15..... . 2
100 ..... . 01..... . ABC ..... . 20..... . 2
100..... . 01..... . ABC ..... . 30 ..... . 2
100..... . 01..... . ABC ..... . 34..... . 2
100..... . 01..... . ABC ..... . 35..... . 2
100..... . 01..... . ABC ..... . 37..... . 0 set to 2
Solution:
In note 900767 you find the report RACORR_VIEW0_SET to correct this.
3) Have ANLB and ANLC the same number of areas
Example:
ANLB has areas 01, 02, 03.
ANLB has areas 01, 02, 03 and 10
Solution in that case would be not that easy
regards Bernhard

Error in AS91: E698 SYST: Abnormal termination

Hi,
I am getting a error while creating legacy asset in AS91.
E698 SYST: Abnormal termination (ANLB-LGJAN 1 not equal to ANLC-GJAHR),
I guess this error relates to fiscal year., my closed fiscal year is 2008 (from OAAQ),
and the take over date is 01.04.2008.
If i have to transfer all assets as of 31.03.2008 into sap system, what should be my
transfer date? and which fiscal year should be open?
Regards,
Khan

Hi Khan,
In addition, to the already made points maybe you can also check the following:
Also, is the actual system date in the same year as your last open fiscal year in FI-AA?
(e.g. last open fiscal year in T093C-LGJAHR is 2009 but actual system date is in year 2010).
In this case you should start the fiscal year change report (RAJAWE00) to open F.Y. 2010 to avoid the error.
For error AA698 not to appear you should close the fiscal years for which ANLC records do not exist.
Regards,
Brigitte

Abnormal Termination (ANLB-LGJAN 1 not equal to ANLC-GJAHR 2) Asset 1000000

Hi,
While we are doing MIGO, we are getting an error message - SYST: Abnormal Termination (ANLB-LGJAN 1 not equal to ANLC-GJAHR 2) Asset 10000000007003170000
also getting same error in ML81N..
Please guide..

Hi Anil,
Please check table ANLC-GJAHR, ANLB-LGJAN and T093C-LGJAHR.
The latest value in these 3 fields should be consistent, which means they are in the current fiscal year.
If they are inconsistent (usually ANLC/ANLB < T093C) please run fiscal year change to correct.
- RAJAWE00: fiscal year change (T-cd:AJRW)
I hope that this resolves your inquiry.
Best Regards,
Vanessa Barth.

AddShutdownHook doesn't work for abnormal termination

Hi,
Is there a way to make sure that shutdown hook threads are run during abnormal termination.
I have written an application and added a shutdown hook by (addShutdownHook method). This thread are is only run when I terminate the application normally by using System.exit(0).
When I use abnormal termination (using Eclipse terminate button) the thread is not started..

I seem to remember that addShutdownHook suggests that it won't be
called upon abnormal termination ...
The solution ? jni ... i don't believe java provides (publicly anyway) any facilitly
to handle signals from the OS.
Some of the java source, as I recall, does do it though ... but jni is the advised
solution if you really need this behaviour ...

ERROR: Abnormal termination of connection

Hi All,
We recently upgraded to Oracle Forms 6i in character mode, running on HP Unix 11.11. My users frequently crash. The screen changes to just a few characters on the right hand side. There are dump files in the forms directory -- one follows. The error message is Abnormal termination of connection, Error Code: 1
Any clues or hints would be greatly appreciated.
Thanks
Jim Barnhart
[email protected]
/u15/acpt/apps/src/frm: cat f60run_dump_960
[Fri Feb 28 15:49:48 2003 PST]::Client Status [ConnId=0, PID=960]
>> ERROR: Abnormal termination of connection, Error Code: 1
FORM/BLOCK/FIELD: APS070:DETAIL_TRANS.PAYMENT_ID
Last Trigger: WHEN-TIMER-EXPIRED - (Successfully Completed)
Msg: <NULL>
Last Builtin: COPY - (Successfully Completed)
------------- Call Stack Trace [ConnId = 0, ProcId = 960] -------------
calling call entry argument values in hex
location type point (? means dubious value)
------------- End of Call Stack Trace -------------
/u15/acpt/apps/src/frm:

This is probably not Oracle Applications eBusiness Suite forms as 11i uses $ORACLE_HOME/forms60 and R12 uses $ORACLE_HOME/forms.
Since there are backslashes, if you are on Windows, use the following note to enable Dr Watson to capture some stack trace information on crashes:
Default Debugger on Windows NT/2000
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=136627.1

Abnormal Termination of Program using Forms 6i

Hi,
Our software is developed in Forms 6i with Oracle 9i as the database.
We are getting issue of abnormal termination of the programs and the following error is spooled into the file ifrun60_dump_<PID>.
[08/02/06 17:17:24 Eastern Standard Time]::Client Status [ConnId=0, PID=2824]
>> ERROR: Abnormal termination, Error Code: C0000006 IN_PAGE_ERROR
======================= STACK DUMP =======================
Fault address: 67DF69C7 01:000459C7
Module: C:\Orant\BIN\DEB60.dll
System Information:
Operating System: Windows NT Version 5.1 Build 2600 Service Pack 2
Command line: "C:\Orant\BIN\ifrun60.EXE" P:\Fmx\smsignon.fmx
FORM/BLOCK/FIELD: SMMDIFRM:BLK_APP_BROWSER.APP_BROWSER
Last Trigger: WHEN-MOUSE-ENTER - (In Progress)
Msg: <NULL>
Last Builtin: SET_MENU_ITEM_PROPERTY - (Successfully Completed)
Registers:
EAX:0012E1A8
EBX:02CC1888
ECX:00000020
EDX:00000000
ESI:67E538B0
EDI:02CC1888
CS:EIP:001B:67DF69C7
SS:ESP:0023:0012E0E8 EBP:00000000
DS:0023 ES:0023 FS:003B GS:0000
Flags:00010246
------------------- Call Stack Trace ---------------------
Frameptr RetAddr Param#1 Param#2 Param#3 Param#4 Function Name
------------------- End of Stack Trace -------------------
Can you please help me in identifying the problem.
Thanks,
Ramesh

As said you'd have to transfer your file somehow to the database server; you could use ftp or standard windows shares for that. After you uploaded your file you could use dbms_lob to process your file and insert it into the database: http://docs.oracle.com/cd/B19306_01/appdev.102/b14258/d_lob.htm#ARPLS020
Or you could use BFILES to store pointers of your files in the table:
http://www.orafaq.com/wiki/BFILE
The other way round you'd simply use ftp or what ever else to download those files to the client and display them with host with the associated program. Bfiles would have the benefit that the files are not stored as blobs in the database but on the filesystem which would spare you the writing of a temporary file to transfer it to the client (and reading it with dbms_lob when transfering it to the server) as the file resides on the file system of the database server.
cheers

Abnormal termination from forms 10g

I have users that sometime get the Microsoft Visual C++ Runtime Library
abnormal program termination error.
Does anybody have any information on this error and how to correct it?
thanks
Allen

Did you get a resolution to your problem?
We have the same problem, we're on Forms 6i, patch 5 (Win NT/sp6). I don't think Oracle will ever fix this problem.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Loren Chu:
When i am using Forms 6i runtime, the forms sudden terminated. I find a dump file, ifrun60_dump_57, in the directory and the content is summaried as follows:
ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION
Module: C:\ORANT\BIN\UTL60.DLL
Could not find Module32First
And the problem continue for many times and the dump file is the same except the module, sometimes the module is C:\ORANT\BIN\UIW60.DLL, and sometimes is C:\ORANT\BIN\PLS805.DLL
Is there any patch need to apply to Forms 6i?<HR></BLOCKQUOTE>
null

Abnormal termination in Forms 6i

When i am using Forms 6i runtime, the forms sudden terminated. I find a dump file, ifrun60_dump_57, in the directory and the content is summaried as follows:
ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION
Module: C:\ORANT\BIN\UTL60.DLL
Could not find Module32First
And the problem continue for many times and the dump file is the same except the module, sometimes the module is C:\ORANT\BIN\UIW60.DLL, and sometimes is C:\ORANT\BIN\PLS805.DLL
Is there any patch need to apply to Forms 6i?
null

Did you get a resolution to your problem?
We have the same problem, we're on Forms 6i, patch 5 (Win NT/sp6). I don't think Oracle will ever fix this problem.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Loren Chu:
When i am using Forms 6i runtime, the forms sudden terminated. I find a dump file, ifrun60_dump_57, in the directory and the content is summaried as follows:
ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION
Module: C:\ORANT\BIN\UTL60.DLL
Could not find Module32First
And the problem continue for many times and the dump file is the same except the module, sometimes the module is C:\ORANT\BIN\UIW60.DLL, and sometimes is C:\ORANT\BIN\PLS805.DLL
Is there any patch need to apply to Forms 6i?<HR></BLOCKQUOTE>
null

Forms- ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION -

Hi All,
I know that our system is using very old technologies (ie Java version, AS 10g 10R2, IE 8, etc). But due to the nature of the application, we can't upgrade it yet for a lot of both technical & political reasons ( i know some of you guys out there are in the same boat as we do)...
Anyways, given the above, we are having this Oracle 10g Forms issue where it just crashes, crash in a sense that the frmweb.exe just died for some reason ( which we are trying to figure out). I know the best way to find the culprit of this issue is to contact Support but given that our current platform, the support guys will just tell us to b49g3r off and use 11g.... So I was hoping to get some feedback from the general public on how to exactly find the culprit code... We tried a lot of things like, enabling trace from forms level (then run xlate to analyze) but given the "random nature" of the error we cannot capture where the error is coming from, we tried enablign a debug for some users but yields to no access....
Maybe there are some Gurus out there that can help us with our problem. Everytime the frmweb.exe dies, it leaves a trace file something like this:
[02/13/13 11:32:01 AUS Eastern Daylight Time]::Client Status [ConnId=0, PID=12916]
>> ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION
======================= STACK DUMP =======================
Fault address: 66453C89 01:00002C89
Module: D:\Apps\oracle\ias\10.1.2\FRPrdHome3\bin\frmw.dll
System Information:
Operating System: Windows NT Version 5.2 Build 3790 Service Pack 2
Command line: frmweb server webfile=HTTP-0,0,1,default,165.142.10.51
FORM/BLOCK/FIELD: VISATMO:VISAT_ANSWERS.<NULL>
Last Trigger: WHEN-VALIDATE-RECORD - (Successfully Completed)
Msg: <NULL>
Last Builtin: NEXT_RECORD - (Successfully Completed)
Registers:
EAX:00000062
EBX:00000008
ECX:00000058
EDX:03E171F8
ESI:04636640
EDI:012BD5D8
CS:EIP:0023:66453C89
SS:ESP:002B:0012B40C EBP:04636390
DS:002B ES:002B FS:0053 GS:002B
Flags:00210202
------------------- Call Stack Trace ---------------------
Frameptr RetAddr Param#1 Param#2 Param#3 Param#4 Function Name
0x04636390 04621a4c 03de287c 00042904 00000000 00000000 0x66453c89
0x04622850 00000000 04580038 00000000 0458003c 00000000 0x04621a4c
0x04580030 004f4d54 00000000 61666564 00746c75 00000000 0x00000000
------------------- End of Stack Trace -------------------
Any forms expert or gurus out there that can help us solve this riddle?
thanks!

Whilst error correcting support may have ended for your Forms version, the product is still covered by sustaining support. The support folks won't tell you to 'b49g3r' off, though they might indeed tell you to start preparing for an 11g upgrade. So they might still be able to help you with this issue with the restriction that they won't be able to get a patch anymore, should your issue be caused by a net yet discovered bug or by a bug which is fixed in 11g. To see your entitlements, check the definition of Sustaining Support in the [url http://www.oracle.com/us/support/library/lifetime-support-middleware-069163.pdf]Lifetime Support (PDF) policies brochure for Middleware.
And have you patched up your environment as per the instructions in Note [url https://support.oracle.com/CSP/main/article?cmd=show&type=NOT&id=415222.1]415222.1, "Steps to Maintain Oracle Application Server 10g Release 2 (10.1.2"?
Thanks,
EJ

One or more tasks were running when ADE has abnormally terminated

I have seen several normal downloads on this PC with XT SP3 so know what it looks like.
Have protection software running: DSL modem firewall on, windows firewall on, AD-Aware free, AVG virus free, Winpatrol free, SpyBot-SD Resident free
Also my notebook with Windows 7 allows downloads with same authentication.
I attempt download and ADE starts with download indicator which terminates prematurely, then get two error messages:
1.
One or more tasks were running when ADE has abnormally terminated. Do you want to resume pending tasks?
and when I select yes...
2.
Error getting license
Server communication problem: E_ADEPT_10

This can occur if a setting somewhere isn't allowing ADE to do what it
wants to do. The error message you included from ADE does not seem
complete, but I'll take a flier and 'assume' that the message is trying to
tell you that software on your machine is blocking at least a portion of
the download. THIS LINK
<http://technology.myblogzone.info/2011/01/how-to-solve-the-error-getting-license-message-i n-adobe-digital-editions/>
may
have the information that will help clear up the issue. One can hope,
anyway....
==============

Runtime error. nimxs.exe abnormally terminated by Visual C++ Runtime library

Hello, I installed without a glitch Labview 8.6 evaluation on my notebook (WXP, SP3). I could not launch the software from the outset and keep getting MS Visual C++ Runtime Library Runtime Error about nimxs.exe abnormally terminating the Runtime.
I had not worked with the development software previously. I only had Runtime Engine 7.1 on my computer to work with older VIs that had been working flawlessly. Idi not develop these VIs and had not modified them. I removed the Engine from the computer and rebooted several times to no success. The forum discussions about this kind of error are not pertinent to this problem of installation that has never worked. I tried to disable firewall and antivirus and added nimxs.exe to the firewall's enabled software, again to no success.
Can anyone help? Thanks in advance

Hello David,
it did not help. Since I could not run LabVIEW any time I do not think the database got corrupted. The message (snapshot attached) appears on the computer start up. I would suspect the firewall, but disabling it did not help either.
Petr
Attachments:
Clipboard01.jpg ‏19 KB

Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION

Hi All:
I am using Oracle Database 10g Enterprise Edition Release 10.1.0.2.0
and Developer Forms [32 Bit] Version 6.0.8.23.2.
I have created a menu. When I call this menu in a form and execute this from either Form Builder or Form Run Time, form executed, but immediately closed when I select any Menu option.
I have seen that every time when I tried to execute my form system generate a dump file. I found the following error in this dump file:
[12/19/06 15:54:02 Arab Standard Time]::Client Status [ConnId=0, PID=3048]
>> ERROR: Abnormal termination, Error Code: C0000005 ACCESS_VIOLATION
======================= STACK DUMP =======================
Fault address: 5DEFE333 01:0000D333
Module: C:\orant\BIN\ifr60.dll
System Information:
Operating System: Windows NT Version 5.1 Build 2600 Service Pack 2
Command line: "C:\orant\BIN\ifrun60.EXE" main_purg express/express@orcl
FORM/BLOCK/FIELD: MAIN_PURG:BLOCK2.IPS
Last Trigger: WHEN-NEW-FORM-INSTANCE - (Successfully Completed)
Msg: <NULL>
Last Builtin: GO_ITEM - (Successfully Completed)
Registers:
EAX:00ED2780
EBX:028D2BDC
ECX:00000000
EDX:0012DC08
ESI:00EDD8E0
EDI:00ED2780
CS:EIP:001B:5DEFE333
SS:ESP:0023:0012D900 EBP:0012DBCC
DS:0023 ES:0023 FS:003B GS:0000
Flags:00010212
------------------- Call Stack Trace ---------------------
x0012f1e0 5df1afd5 00f5b27c 00000001 00ee3360 00edd8e0 0x5df1c6bf
0x0012f278 5df1ae80 028d3e98 00000000 00edd8e0 00ee3360 0x5df1afd5
0x0012f29c 5df1e96e 028d41a4 00000000 028d3e98 00edd8e0 0x5df1ae80
0x0012f2dc 5df1e0ff 028d3e98 00f5b25c 00ee4bfc 00edd8e0 0x5df1e96e
0x0012f30c 5df1daad 00ee3360 00ee4bfc 00ee4bfc 00edd8e0 0x5df1e0ff
0x0012f334 5df1ccea 00ee3360 00ee4bfc 00000000 00edd8e0 0x5df1daad
0x0012f384 5defa2d7 00000000 00000001 0012f3bc 00000000 0x5df1ccea
0x0012f3ec 5def9d06 028d2bdc 00ed4604 00000000 00000001 0x5defa2d7
0x0012f508 5def2e51 00000000 00ee19b8 00000009 00ee1728 0x5def9d06
0x0012fd68 5def19e9 00000014 00000000 00000003 01590a40 0x5def2e51
0x0012fd8c 5def18be 00e22090 00000000 00000000 00000003 0x5def19e9
0x0012fdac 67948973 00e22090 00000000 00000000 00000003 0x5def18be
0x0012fdfc 6794a3b1 00e230dc 00403010 00000000 00000003 0x67948973
------------------- End of Stack Trace -------------------
Why this is happening?
Thanks
Hassan

I don't know if the Version 6.0.8.23.2. that you are using is patch 18 ?
If not, maybe you need to upgrade to patch 18 ?
Really not sure here. We are using Oracle 9i database and have no problem with patch 13 of forms 6i. Maybe it has something to do with the menu names ? (names too long or containing a reserve word ?).
Really don't know what else can cause that.

Is not equal to operator not working properly in obiee 11g

Hi ,
I have 5 members in a dimesion ENTITY.gen5 (A,B,C,D,E) .
nOW , I am using a *"is equal to "* operator in that ,
ENTITY.gen5 = A;B .
Which results in a strange error while running the report :
Socket communication error : was attempted on somthing which is not socket .
or sometimes ,
Socket communication error : Oracle BI server is not currently running .
So , I tried with giving "is not equal to" i.e . ENTITY.gen5 != C;D;E .
Then , I am getting A,B,C . C is not desired here .
FYI , I have renamed ENTITY.gen5 member names in essbase once and after refreshing I tried the above .
OBIEE version : 11.1.1.6
essbase version : 11.1.2.1
Thanks in advance

In EM, go to Weblogic Domain, right click on bifoundation_domain and on the Security menu choose Application Policies.
Set Application Stripe to obi and click the blue arrow search button.
Highlight BIConsumer and click Edit.
Under Permissions locate Resource Name oracle.bi.publisher.scheduleReport. Highlight this and click Delete...
Click OK (top right corner).
Now log your user out of OBIEE and back in again, and the option should have disappeared from their New menu.

Not Equals Function is not working in Mapping

Hi All,
i have to do mappig based on the Not Equals & And conditions
If the Material Group starts with "F"
                        And Material Type Not Equals to "ZPRO" means
                                    then send "FG" Else "FC"
Here Not Equals & And Functions are not giving success, Error throwing like
Cannot cast ZPRO to boolean] in class com.sap.aii.mappingtool.flib3.Bool method not[ZPRO
Please help in this
Regards

i have to do mappig based on the Not Equals & And conditions
If the Material Group starts with "F"
And Material Type Not Equals to "ZPRO" means
then send "FG" Else "FC"
Here Not Equals & And Functions are not giving success, Error throwing like
Cannot cast ZPRO to boolean] in class com.sap.aii.mappingtool.flib3.Bool method not[ZPRO
the logic applied is incorrect
NotEquals is a boolean function meaning it will accept only boolean values as input....
To check if the Material Number is ZPRO or not use the below logic
MaterialNumber                                            Then(FG)
                      ------equalS(TextFunction) ---- not -----ifWithElse ------------------ Target
Constant (ZPRO)                                                   Else(FC)
Regards,
Abhishek.

SYST: Abnormal termination (T_ANLB not equal to T_ANLC)

Similar Messages

Maybe you are looking for