System 46C SR2 installation on iseries with V6R1.

Hi all,
we are installing a test system release 46C SR2 (EBCDIC) on our new i5 server M50 with V6R1.
Some problems with command LODRUN from kernel CD (we are using CD kernel 46D EXT EBCDIC patch 1674 #51020587);
probably is a conversion problem for SAPCAR but I've bypassed it copying an R3SETUP lib from another server.
Now we have a serious problem to apply kernel patches; I've updated APYR3FIX al level 3 according note 68440, but some patches (like DW, ML, STOPSAP, etc) give me the message CPF5CA6 (service program level ........).
Thank's for your help.
Kind Regards
Fabio Valle

Hi Volker,
I understand your question.
We have current servers on V5R4 (with 46C EBCDIC develop and productive system) and a new clear server P6 with V6R1.
We need to install a test 46C EBCDIC system for a CPC to ASCII, an release upgrade to ECC 6.0, and a CPC to UNICODE.
On the old servers the kernel 46 EXT EBCDIC is at 2228 level but on V6R1 the minimum level is 2340 (or near).
The problem exist applying some patches but not for all ......
I've opened a message for OSS and now OSS is investigating our system ......
I'll give you new info.
Kind regards
Fabio

Similar Messages

I ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

i ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

What's the error mesage?

SAP R/3 4.6C Installation in HPUX with 4 sapdata files

Hi all,
We are building a sandbox system to perform our upgrade.
While installing SAP R/3 4.6c, in HPUX/Oracle 10g, we need to have only 4 sapdata filesystem:
Oracle/DV1/sapdata1
Oracle/DV1/sapdata2
Oracle/DV1/sapdata3
Oracle/DV1/sapdata4.
But while doing the installation it creates sapdata5 & sapdata6. But we don't want to have sapdata5 & sapdata6.
We need to do the installation within the 4 sapdata filesystems itself.
Can any one help me how and where to edit, so that the installation will fit withing the 4 sapdata FS itself.
Thanks
Senthil

Hi Srini,
If you are using sapinst tool you should be able to delete unavailable sapdatas easily in ur sapinst input DB parameters section, I also had the same issue.
Optional,you may be already aware it can also be solved by creating sapdata directories under /oracle/<SID>/... at OS level but be careful data files created will fall under your parent dir.
regards,
Vamshi.

EP Central System + Dialog Instance Installation options

Hi Friends
For my production EP 6.0 WAS 6.40-Java instance I am getting 3 AIX servers, say server DBserver, Appserver1 & Appserver2, we want to install the database & CI on the DBserver, the other 2 servers need to serve the role of Application servers to the DB+CI server.
In our SAP R/3 Production systems we don't allow the users to login to the server hosting the (database+CI) & we allow them to login only to the appication servers, I want to do a similar setup for my Production portal landscape & require that the portal users are load-balanced using the SAP Web Dispatcher to the 2 application servers.
I have 2 questions on which installation options to choose to achieve the above objective.
1. Can somebody check & confirm if the below mentioned Installation sequence is correct for Installing the WAS on the 3 servers.
a) Using Installation option "Java System ->Oracle->Central System->Custom Installation-Java system" for the DBserver.
b) Installation option "Java System ->Oracle->Central System->Dialog Instance Installation" for Appserver1 & Appserver2.
2. Can somebody advice how do I need to install the portal on the 3 servers so that the above objective of load-balancing the users to the 2 App servers is met.
a) Do I need to install portal only on the DB+CI server & then the portal platform will be setup on the 2 App servers as well or
b) Can I install the portal separately on the 2 portal App servers.
Thanks & Rgds,
Abhishek

Hi Friends
Any replies will be appreciated & also rewarded with points.
Thanks & Rgds,
Abhishek

Which installation disks go with which computer?

I work at an elementary school where we have MacBooks, MacBook Pros, Mac minis, and different generations of iMacs. The person before me was not clear about labeling which installation disks go with which computers. Most of them say "For Mac Computers" and then have the software version on there as well. Is there a reference anywhere where I can look up the part number from the disks to see which model of computers they go with?

sig wrote:
Can you imagine this elementary school with MacBook Pros and MacBooks?
Sure, especially since the first post says, "we have MacBooks, MacBook Pros, Mac minis, and different generations of iMacs."
Regarding the which goes with which question, the O.P. may find it useful to know how the system discs that came with other users' Macs are marked. For mine:
iMac G5: "iMac G5" - Mac OS version 10.4 - AHT version 2.5.1 - Disc version 1 -p/n 2Z691-5317-A
MacBook: "MacBook" - Mac OS version 10.5.2 - AHT version 3A143 - Disc version 1.1 - p/n 2Z691-6209-A
iMac 2008: "For Mac Computers" - Mac OS version 10.5.4 - AHT version 3A152 - Disc version 1.1 - p/n 2Z691-6304-A
If other users post similar info for other Mac models the O.P. might be administering, some might see a side benefit for themselves: locating where in the heck they put their original system discs for safe storage!
A tip for the O.P.: It isn't a good idea to mark the OEM discs themselves with model info using a regular "Sharpie" or similar marker since the ink can over time seep through the gray surface paint layer into the optical layer beneath it, causing read errors. Either use a marker specifically made for this purpose or mark the sleeve with the info.

System copy stuck on "Import ABAP" with "Invalid Migration Key"

Dear Team,
I'm performing a system copy from AS400/DB2 (of our ECC DEV) to AIX/DB2. Export has been completed successfully, while importing it is stuck on the "Import ABAP" phase with error "Invalid Migration Key". However the key is generated with correct parameters only and even we have tried the key from SAP NOTE: 1768158 but of no use.
Below is brief about systems environment:
Source System
OS : AS/400 (IBM i-Series V6R1)
DB : DB/400 (Integrated DB with IBM i)
NW: NW 7.00 ( ECC 6.0 with SP11)
Target System
OS : AIX 7.1
DB: DB2 10.1 with FP3
NW: NW 7.00 ( ECC 6.0 with SP11)
The process is being performed using SWPM SP05
Kindly find the test_MIGKEY.log for analysis and let me know if any ideas.
Thanks in advance,
SUJIT

I found below error , are you doing this in distributed environment ?
Is source and target kernels are same ?
Found error in the log.
DbSl Trace: DbSlConnect to 'ECT' as 'sapect' failed
(DB) ERROR: db_connect rc = 256
DbSl Trace: DbSlConnect to 'ECT' as 'sapect' failed
(DB) ERROR: DbSlErrorMsg rc = 29
ERROR: invalid migration keybut the system wrote other errors instead, for example, (DB) ERROR: db_connect rc = 256, this does not involve an incorrect migration key. The errors should refer here to the actual cause (for example, the connect to the DB does not work). In this case, first check the database connect with the command <Z2 R3trans -x or R3load -testconnect, that must be executed as <sid>adm.Also make sure that the R3load that is used during the export and import has the same kernel release (for example, 7.00). You can check the relevant version of the R3load using 'R3load -version'.
===================

On a certain website, it says to click here to download plugin (Java). When executing the download, it says 'the installer cannot proceed with the current Internet Connection settings. I'm running 4.01. It was fine before the upgrade.

On a certain website, it says to click here to download plugin Java Runtime Environment. I receive the message installer cannot proceed with the current Internet Connection settings. It was fine before the upgrade to 4.01. I have another PC that has IE on it and it works fine and again it worked fine until the upgrade to 4.01. I've done the off-line download but in Firefox it still says I need the plugin and still results in the installer cannot proceed with the current Internet Connection settings.

You can install Java from here: http://www.java.com/en/ 
You also need to update your Flash installation since the one you have at the moment exposes your system to attack. It's a similar story for Adobe Reader.
See: 
* http://www.adobe.com/support/security/bulletins/apsb11-12.html 
* http://www.adobe.com/support/security/bulletins/apsb11-08.html 
Download from here: 
* Adobe Flash: http://get.adobe.com/flashplayer/ 
* Adobe Shockwave For Director: http://get.adobe.com/shockwave/ 
* Adobe Reader: http://get.adobe.com/reader/?promoid=BUIGO

System freezes after installation of version 11.5.502.149

WindowsXp, Firefox, Flash player 11.5.502.149 - I have made 2 attempts to load latest version; both times when I have restarted my system Windows will only load to Wallpaper and then stops- I waited for atleast 30 minutes - no program icons, no taskbar etc, Have used safe mode to uninstall flash player, did registry fix, have used system restore, still will not load. Did chkdsk - no apparent disk problems - but then after attempting to restart several times after long wait finally loaded. System will now restart, but as this happened after installation of flash player 2x I am unwilling to retry. - and now can not reload older version of flashplayer. - have recently installed other program updates and have not had system freeze so do not think it is a general installation problem. Any ideas?
Thanks

Pat
Trying to install an older version I got a message something to the effect that a newer version is available and program does not install. By hunting around the support areas on Adobe I did find a page that noted that if for some reason the new version did not work an older version was archived and a link.. so I did find an older version that would load.. of course I had to find a Zip program to unzip the file and it did try the same message ... there were 2 unzipped versions - only one worked but I do now have a working version albeit of Flash Player.
I googled for WindowsXp freezing and found a number of bulletin boards/forums that discussed solutions - which were pretty much what I did. Typically it happened after installing a new or updated program. No reasons were mentioned as to why or what was happening and the solutions of starting in safe mode, uninstalling, restoring, chkdsk are all sort of hit and miss... if one doesn't work try another... with the final solution being reload windows.. of course my version came installed and I don't have a backup disk so I imagine that would be another day or two of total frustration... so I guess I will avoid trying to update the flash player as long as possible. I have my system set up to only allow updates I have confirmed.
Thanks for your prompt response.
Janet Forbes
Quoting Pat Willener <[email protected]>:
Pat Willener http://forums.adobe.com/people/pwillener created the
discussion
"Re: system freezes after installation of version 11.5.502.149"
To view the discussion, visit:
http://forums.adobe.com/message/5057581#5057581

Unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest

unable to delete Role from User ID in SAP SOLMAN production system but able to from DEV with the same authorization, pls suggest

Hi,
For SU01 role removal, you do not need S_USER_AGR with 02, and as you mentioned both authorizations available in production, if so trace should not show you the S_USER_AGR with 02 with RC=04.
I would recommend to do role comparison for the user performing the activity. and then check if you have the S_USER_AGR with 02 in user buffer SU56.
But ideally it should not ask you S_USER_AGR for 02 through SU01, so please take help of abaper to debug it.
Also put trace in non-prd to see if S_USER_AGR is getting checked with 02 for removal through SU01.
BR,
Mangesh

How can I install Firefox SILENTLY in a specific installation folder, -ms with which parameters ?

How can I install Firefox SILENTLY in a specific installation folder, -ms with which parameters ?
"Firefox.exe_path" -ms OPTIONS ??
Thanks.

'''Is there a way to download FF to a USB from another computer and install it from that USB on my PC? '''
You basically answered your own question. If you have access to another computer just go download the appropriate language and OS version of Firefox 5.0 from http://www.mozilla.com/en-US/firefox/all.html and put it on you usb drive and then go and install it onto you pc.

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory

SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath Mali

Hi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Moving files to another directory got an error message [File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".

Hi all,
I am having a list of files in a folder named datafiles and I am processing them one by one when I finish each one I want to move the file into a folder archive.
I am having a variable named filename and archivefilename and two fileconnections one is originalfiles and archivefiles
archivefilename=replace( @[User::filename],"datafiles","archive")
orginalfiles connection is an expression =@user:filename
archivefies connection is an expression=@user:archivefilename
the filename comes from reading the folder that contains those files
public void Main()
            string[] filenames;
            filenames = Directory.GetFiles(@"C:\luminis\datafiles\");
            Array.Sort(filenames);
            Dts.Variables["filelist"].Value = filenames;
            Dts.TaskResult = (int)ScriptResults.Success;
The folder c:\luminis\archive\ exists
why I am getting this error
My filesystem task : destinationpathvariable =false
destinationconnection:archivefile
overwrite=true
operation=movefile
issourcepathvariable=false
sourceconnection=original file
why am i getting this error[File System Task] Error: An error occurred with the following error message: "Could not find a part of the path.".
sohairzaki

there may be 2 problem...
1> specify a target directory only, not with the file name.
OR
2> Try using the unc,path format \\computername\sharename\
let us know your observation...
Let us TRY this | Mail me
My Blog :: http://quest4gen.blogspot.com/

I did a full system restore to my phone along with the new 7.0 update. Now I went to restore my phone setting back through Itunes and it goes through all the steps but when it is completed it wont get past the "Connect to Itunes" screen

I did a full system restore to my phone along with the new 7.0 update. Now I went to restore my phone setting back through Itunes and it goes through all the steps but when it is completed it wont get past the "Connect to Itunes" screen

So what happens when you connect to iTunes?

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

eBay or Craigslist would be the only choice.

ERROR: DW006: Apple Package failed to install successfully. ERROR: Third party payload installer Adobe Acrobat XI Pro Installer.pkg failed with exit code: 1

Hi All, anyone with this problem with Acrobat Pro XI, IM USING MAC, also Yosemite if that helps.
Also Adobe CC, BASICALLY IT just quit and i had to uninstall, re install, and I get this
ERROR: DW006: Apple Package failed to install successfully.
ERROR: Third party payload installer Adobe Acrobat XI Pro Installer.pkg failed with exit code: 1
Anyone with same issues...

Same problem. Creative Cloud subscriber running Mac 10.10.2 on iMac (Retina 5K, 27-inch, Late 2014). All apps work fine EXCEPT for Adobe Acrobat XI. I have tried 100 times and 100 solutions. NOTHING works.

System 46C SR2 installation on iseries with V6R1.

Similar Messages

Maybe you are looking for