System 8 for Power Mac 7500/100 on CD

My harddisk died and I have seem to lost my system CD as well.
Is there anybody who can provide me with a CD with system 8, I can't download from the internet (computer won't start up) so CD has to be mailed by post to the Netherlands.
Thanks

Hello Rob,
You will find a disk image of a bootable Disk Tools PPC floppy here. With access to another Mac with a built-in floppy drive, use StuffIt Expander to decode the downloaded .bin file (if applicable, set the StuffIt Expander preferences NOT to mount disk images). Then use the Make a Floppy command (under the Utilities menu) in Disk Copy 6.3.3 to produce a sector-copied floppy disk. This diskette should at least make a proper startup of the Power Macintosh 7500/100 possible. You may thus be able to inspect and perhaps correct the contents of the hard disk.
Through the use of special techniques it is also possible to modify a tools floppy to hold a different disk utility (such as Apple HD SC Setup 7.3.5 here) or a CD-ROM extension (like Apple CD-ROM 5.4 here, and various helper files).
Jan

Similar Messages

Power Mac 7500/100 (G3) -networking wireless/either net 2 iMac...

I got a iMac Intel Duo (2006) OS 10.6.5 & I'm trying to get my PMac 7500/100-G3 (upgrade) OS 9.1 to talk to each other by eithernet or a wireless network for simple file sharing & transfer. Is there a way to do that? I do have a Eithernet Hud thet they are both hooked up to. So far I have not found a way and I just transfer files via:
PMac 7500 - USB > Thimb Drive < USB - iMac.
Soon to get my PMac G5 up and going with the same problem...
Cory Cummings
[email protected]
(210)322-4484

OSX.4.x lost the file transfer ability of Appletalk... 10.1.5 thru 10.3.9 had it!
http://docs.info.apple.com/article.html?artnum=301183
With OS9 set with Appletalk to using TCP/IP, and or Chooser>AppleShare+IP, you can connect to a 10.4 or some later OSes machine.
"Mac OS X 10.4 and later don't support Personal File Sharing (or other AFP) over Appletalk, though by initiating the connection from the opposite direction you could still achieve an IP connection from a Mac OS 8 computer to a sharing Mac OS X computer. The Network preference pane in Mac OS X 10.4 and later still offers the AppleTalk checkbox, but it is for browsing AppleTalk-advertised resources and zones. The subsequent connection must be over TCP/IP."
http://docs.info.apple.com/article.html?artnum=106461

Power Mac 5260/100 System CD

I found a eBay store selling what appears to be a Power Mac 5260/120 System CD containing Mac OS 7.5.3. Would this System CD also be compatible with a Power Mac 5260/100 by any chance? I'm asking because I happen to own a Power Mac 5260/100 I bought second hand off eBay.

I would think that there is a high probability it would work. If it's not too expensive, it's worth the chance of buying.
 Cheers, Tom

Power Mac 5260/100 Won't Start

I just noticed recently that my Power Mac 5260/100 won't startup anymore. I just recently replaced the PRAM battery since according to my dad's mulit-meter it was dead. The Power Mac 5260/100 doesn't even get as far as the bonging stage in the startup process. Does this mean I have a dead logic board or bad RAM? I'd be willing to replace the logic board since I have a brand new Apple TV/Video System installed that I payed a lot of money on eBay for (it came unopened when I got it so I know those components didn't fail). I also use it for old games and would like to know if I'll be able to in the future too.

I wouldn't give up yet. The CUDA reset and PRAM battery are "first responders" when it comes to "mostly dead" Macs, so we always start there.
When you attempt a start, can you hear anything? Fans? Hard drive?
Have you tried booting from a CD with a valid system? Utility CDs allow this if they are bootable. My TechTools 3 CD boots into the highest OS the computer will support (up to 9.2.2). It's amusing to see a 6100 or 6200 display the OS9 logo. I had to run utilities every few days on my 6200/75 to keep it limping along.
Checked everything inside for solid connections?
I think that one has the "tray type" logic board with scores of connectors along one edge. Those must be clean and seated.
Some in this series have a plastic bridle arrangement for the rear of the CD-ROM that can flex and lose contact. Check/clean it if present.
I believe this computer uses "soft power." Have you tried a different keyboard, or tried using the backup power button?
There were "known hardware issues" with this and similar Mac models. Review that article and this one (includes a logic board diagram). The second link has links to hardware testers if you get it running. The extended warranty period ended in July 2003(?), however.
AJ

Batteries for Power Mac G3 Beige Minitower

Where can I get batteries for Power Mac G3 Beige Minitower? I think they're Lithium batteries 3.6V 200W 922-4542.

m i g,
Here is a source for $4.99:
http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/
Jim
Note to others: (direct quote from above link)
This battery is an exact replacement for the below listed models.
Macintosh II series computers
Macintosh SE FDHD
Macintosh Classic (4-chip and 2-chip)
Macintosh SE/30, IIx, IIcx, IIci, IIfx, IIsi series computers
Macintosh IIvi, IIvx, Performa 600 series computers
Macintosh LC, LC II, LC III, Performa 400 series computers
Macintosh Quadra 605, LC 475, Performa 475, 477 series computers
Macintosh LC 520, LC 550, Performa 550 series computers
Macintosh Classic II, Color Classic, Performa 200 series computers
Macintosh Centris 610, 650, 660AV series computers
Macintosh Quadra 610, 660AV, 650, 700, 800, 840AV, 900, 950 series computers
Power Macintosh 6100, 7100, 8100 series computers, and Performa 6100 series computers
Power Macintosh 7200, 7300, 7500, 7600, 8500, 8600, 9500, and 9600 series computers.
Power Macintosh G3 - all models, entire series
iMac - all models, entire series
Power Mac G4 - all models, entire series
Power Mac G5 - all models, entire series

Power Mac 5260/100 Open Transport

I can't get Open Transport to work on my Power Mac 5260/100 with 64 MB of RAM running Mac OS 9.1. I have the TCP/IP control panel set to get the IP address using DHCP using the Farallon LC PDS EtherMac NSC 10-Base T ethernet card & I checked use 802.3 framing. I have also installed the TCP/IP Options control panel & I checked all three check boxes. I also upgraded Open Transport to 2.7.6. What do I need to do to get my Mac online?

No. I haven't configured the AppleTalk control panel. The only thing I've ever used AppleTalk for is to print to my Personal LaserWriter NTR over LocalTalk. I managed to get Open Transport working in Mac OS 8.6 but I forget what exactly I did to get it working. It worked for a while with the Apple PDS Ethernet card driver & then it stopped working. I remember I had to install the TCP/IP Options control panel & check Disable MTU IP Path Discovery to get it working. I also had to install the latest version of Apple's Remote Access Client. Before upgrading to Mac OS 9.1 I did a clean reinstall of Mac OS 8.6 but I've kind of forgotten what exactly else I did to get online. I've never used the Farallon drivers & I'm not sure if I trust the installer either since it installs a outdated version of the EtherTalk Phase 2 extension.

I have bought Mac Os X Mauntain Lion Operating System for my mac book pro.I reinstalled my system.Now I cannot download it.It says"This product is not avaible for Turkish App Store".How can I get the Operating System?

I have bought Mac Os X Mauntain Lion Operating System for my mac book pro some time ago.I then reinstalled my system.The original operating System on my Mac is 10.7 Lion. Now I cannot download Mac Os X Mauntain Lion Operating System.It says"This product is not avaible for Turkish App Store".How can I get this Operating System?

http://www.apple.com/tr/support/

What is the best 'cleaning system' for the Mac?

What do you recommend as the best 'cleaning system' for the Mac!

How to maintain a Mac
Make two or more backups of all your files
One backup is not enough to be safe. A copy of a backup doesn't count as another backup; all backups must be made directly from the original data.
Keep at least one backup off site at all times in case of disaster. Backing up to a cloud-data service is one way to accomplish this, but don't rely exclusively on such backups.
In fact, don’t rely exclusively on any single backup method, such as Time Machine.
If you get an indication that a backup has failed, don't ignore it.
Keep your software up to date
In the App Store or Software Update preference pane (depending on the OS version), you can configure automatic notifications of updates to OS X and other Mac App Store products. Some third-party applications from other sources have a similar feature, if you don’t mind letting them phone home. Otherwise you have to check yourself on a regular basis.
Keeping up to date is especially important for complex software that modifies the operating system, such as device drivers. Don't install such modifications unless they're absolutely necessary. Remove them when they are no longer needed. Before installing any Apple update, you must check that all system modifications that you use are compatible. Incompatibility with third-party software is by far the most common cause of difficulties with system updates.
Don't install crapware
...such as “themes,” "haxies," “add-ons,” “toolbars,” “enhancers," “optimizers,” “accelerators,” "boosters," “extenders,” “cleaners,” "doctors," "tune-ups," “defragmenters,” “firewalls,” "barriers," “guardians,” “defenders,” “protectors,” most “plugins,” commercial "virus scanners,” "disk tools," or "utilities." With very few exceptions, such stuff is useless or worse than useless. Above all, avoid any software that purports to change the look and feel of the user interface.
It's not much of an exaggeration to say that the whole "utility" software industry for the Mac is a fraud on consumers. The most extreme examples are the "CleanMyMac," "TuneUpMyMac," and “MacKeeper” scams, but there are many others.
As a rule, you should avoid software that changes the way other software works. Plugins for Photoshop and similar programs are an obvious exception to this rule. Safari extensions, and perhaps the equivalent for other web browsers, are a partial exception. Most are safe, and they're easy to get rid of if they don't work. Some may cause the browser to crash or otherwise malfunction. Some are malicious. Use with caution, and install only well-known extensions from relatively trustworthy sources, such as the Safari Extensions Gallery.
Only install software that is useful to you, not (as you imagine) to the computer. For example, a word processor is useful for writing. A video editor is useful for making movies. A game is useful for fun. But a "cache cleaner" isn't useful for anything. You didn't buy a computer so you could clean caches.
Never install any third-party software unless you know how to uninstall it. Otherwise you may create problems that are very hard to solve. Do not rely on "utilities" such as "AppCleaner" and the like that purport to remove software.
Don't install bad, conflicting, or unnecessary fonts
Whenever you install new fonts, use the validation feature of the built-in Font Book application to make sure the fonts aren't defective and don't conflict with each other or with others that you already have. See the built-in help and this support article for instructions.
Deactivate or remove fonts that you don't really need to speed up application launching.
Avoid malware
"Malware" is malicious software that circulates on the Internet. This kind of attack on OS X was once so rare that it was hardly a concern, but it's now increasingly common and dangerous.
There is some built-in protection against malware, but you can’t rely on it—the attackers are always at least one day ahead of the defense. You can’t rely on third-party "anti-virus" products for protection either. What you can rely on is common-sense awareness—not paranoia, which only makes you more vulnerable.
Never install software from an untrustworthy or unknown source. If in doubt, do some research. Any website that prompts you to install a “codec” or “plugin” that comes from the same site, or an unknown site, is untrustworthy. Software with a corporate brand, such as Adobe Flash Player, must come directly from the developer's website. No intermediary is acceptable, and don’t trust links unless you know how to parse them. Any file that is automatically downloaded from the web, without your having requested it, should go straight into the Trash. A web page that tells you that your computer has a “virus,” or that anything else is wrong with it, is a scam.
In OS X 10.7.5 or later, downloaded applications and Installer packages that have not been digitally signed by a developer registered with Apple are blocked from loading by default. The block can be overridden, but think carefully before you do so.
Because of recurring security issues in Java, it’s best to disable it in your web browsers, if it’s installed. Few websites have Java content nowadays, so you won’t be missing much. This action is mandatory if you’re running any version of OS X older than 10.6.8 with the latest Java update. Note: Java has nothing to do with JavaScript, despite the similar names. Don't install Java unless you're sure you need it. Most people don't.
Don't fill up your disk or SSD
A common mistake is adding more and more large files to your home folder until you start to get warnings that you're out of space, which may be followed in short order by a startup failure. This is more prone to happen on the newer Macs that come with an internal SSD instead of the traditional hard drive. The drive can be very nearly full before you become aware of the problem.
While it's not true that you should or must keep any particular percentage of space free, you should monitor your storage use and make sure you're not in immediate danger of using it up. According to Apple documentation, you need at least 9 GB of free space on the startup volume for normal operation.
If storage space is running low, use a tool such as OmniDiskSweeper to explore the volume and find out what's taking up the most space. Move seldom-used large files to secondary storage.
Relax, don’t do it
Besides the above, no routine maintenance is necessary or beneficial for the vast majority of users; specifically not “cleaning caches,” “zapping the PRAM,” "resetting the SMC," “rebuilding the directory,” "defragmenting the drive," “running periodic scripts,” “dumping logs,” "deleting temp files," “scanning for viruses,” "purging memory," "checking for bad blocks," "testing the hardware," or “repairing permissions.” Such measures are either completely pointless or are useful only for solving problems, not for prevention.
To use a Mac effectively, you have to free yourself from the Windows mindset that every computer needs regular downtime for maintenance such as "defragging" and "registry cleaning." Those concepts do not apply to the Mac platform.
A well-designed computing device is not something you should have to think about much. It should be an almost transparent medium through which you communicate, work, and play. If you want a machine that needs a lot of attention just to keep going, use a PC, or collect antique cars.
The very height of futility is running an expensive third-party application called “Disk Warrior” when nothing is wrong, or even when something is wrong and you have backups, which you must have. Disk Warrior is a data-salvage tool, not a maintenance tool, and you will never need it if your backups are adequate. Don’t waste money on it or anything like it.

Power Macintosh 7500/100 thinks all floppies are locked.

My new (to me) Power Macintosh 7500/100 is thinking all disks I put in it are locked. Is there a way to fix this without replacing the drive?
Thanks,
George W.
www.apple-commercials.co.cc

This is how I clean floppy drives:
1) Remove floppy drive from the computer.
2) Remove the cover.
3) Use a can of compressed air, making sure all the loose dust is gone.
4) Use cotton swabs to reach the tighter spots, making sure all dirt is cleaned out.
5) Lubricate the mechanism and springs with 3-in-1 multipurpose oil, a silicone grease or something similar. Do not use WD-40 or white lithium grease - these won't last long.
6) Reassemble the drive and install it back into the computer.
7) Use a floppy drive cleaning diskette/kit to clean the read/write heads of the drive. Although this can be done manually with rubbing alcohol on a cotton swab, it is more safe to use a cleaning diskette because you cannot damage the drive this way. If doing it manually, please be careful and don't stretch the read/write head spring too far - otherwise, the upper read/write head will never go down again.
If you follow these easy procedures, your drive should be good as new. Good luck!

How, specifically, do I download the latest operating system for my Mac laptop?

How, specifically, do I download the latest operating system for my Mac laptop?

Choose About this Mac from the Apple menu and check the processor.
If it's a Core Duo Mac, click here, install the DVD, and run Software Update.
If it's a Core 2 Duo or better Mac, follow the Core Duo instructions, open the Mac App Store, and try downloading 10.9. If you get told it's incompatible, go to the online Apple Store and order a download code for Lion 10.7.
(97036)

Need new low-end graphics card for Power Mac G5 (PowerPC 970)

My Power Mac G5 (PowerPC 970) has recently died I believe due to a bad
ATI RADEON X800 XT MAC EDITION video card.
Reason for thinking its the card, is that the machine was performing its intended tasks for several days even though the monitor was snow.
Having trouble determining a low-end replacement. (I no longer need the enhanced features of the RADEON X800 for this machine.
Much appreciated if someone could suggest a product appropriate for PowerPC 970.
Thanks!

I also ran into this issue with my dual G5. When I bought it, I didn't get wireless because it was a dedicated desktop on the network, but I'm upgrading and giving it to the kids to use in a room without wired network. Now that wireless would be really nice and it looks like the official solution is:
"Apple Wireless Upgrade Kit for Power Mac G5 Dual or Power Mac G5 Quad MA252G/A"
which is really expensive and difficult to install. But the weird thing is that I do have bluetooth. I wonder if there's just some little doodad I need to connect to get wireless going too, but I can't find any info on the card, and it looks like it's buried on the motherboard behind all the cooling stuff. I'll probably just spring for one of the USB solutions.

What is the best security system for a Mac?

I am curious as to what is the best security system for a Mac. Is it Norton or something else? I have a Macbook Pro with Lion and I want to make sure I avoid all of the viruses and malware out there.

Hi c,
General consensus here is to stay far, far away from Norton, and that most anti-malware software for Mac causes more issues than they will ever avoid.
Most Mac users run bare.
I still haven't seen anything in the wild, no OS X virus really going beyond proof of concept; some malware, yes, but not a virus. And the existing malware requires users to "open the door" and basically tell the malware it's ok to do its thing. I'm not sure there'll ever be software which can overcome the actions of such a user.
For those who feel the need, ClamX has been often suggested.

168 Pin RAm for Power Mac

Does anyone know if MT8LD864AG-6 168 pin DIMM is compatible with the RAM for Power Mac 8500 120MHz and Power MAc 7200 120 MHz?
Thank you in advance for your advice.
Robert

Hi Robert,
The ZIF processor upgrade I have in my Beige G3 MT (300 mHz originally) is a Sonnet G3/500--I wish it were a G4! I installed it when I still had OS9. It stayed in place when I installed Jaguar and, later, Panther.
As Grant mentions, I used a third-party helper program called XPostFacto, "XPF" for short. Installing "unsupported" Panther with XPF was far easier than installing the "supported" Jaguar and the computer is now more stable.
T'was Grant who talked me into trying Panther. Now I can't believe I waited so long! I used an older version of XPF, version 3.1, at Grant's suggestion. V3.1 seems to be the "sweet spot" for installing Panther. Some Beige G3 owners have successfully installed 10.4.x with later version of XPF but more users have reported stability issues than with 10.3.
If you are interested in learning more about the upgrade paths available to the Beige G3, there is a very active forum area here:
http://discussions.apple.com/category.jspa?categoryID=110
Hope this helps!
A

What is the max os upgrade available for power mac g5 w/powerpc processor

What is the max one can upgrade the os on a powerpc power mac g5

Hi, 10.5.8...
Leopard requirements/10.5.x...
    * Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
    * 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
    * DVD drive for installation
    * 9GB of available disk space (I say 30GB at least)

Optical Fun for Power Mac G5 - Chosing a Burner

Hi all,
So I have a Power Mac G5 with a burner that is not so great anymore. I burn at 1x for DVDs and on good days, burn a CD at 4x. Time for a new burner you would say. I would agree.
I have a predicament and wondered if anyone suggests a burner to go with. I'm not looking to spend a lot and just want something that would work well and fit nicely.
I found two that might suit my little G5:
Pioneer
http://www.newegg.com/Product/Product.aspx?Item=N82E16827129007
LG
http://www.newegg.com/Product/Product.aspx?Item=N82E16827136119
Those two were Best Sellers at New Egg with nice reviews, but nothing on the Mac.
Does anyone have any other suggestions or anything that worked for you?
Has anyone used the brands above?
Thanks for reading and in advance for the help,
Bryant

Hi. The Pioneer 112D is often recommended in these forums - can't recall any adverse reports. I installed a previous version, the 110D, with no problems - works well.
The installation instructions are here
http://www.info.apple.com/usen/cip/pdf/g5/073-0807.pdf
Installation is a bit fiddly, but not difficult. There are two things to check: that the stand-offs (see Figure 8 of the installation instructions) are the right length to line the drive up with the aperture in the G5 casing - and that you remove the plastic bezel with CD, DVD, etc. on it from the front edge of the tray, so it doesn't catch on the edge of the aperture in the G5 casing - discussed here
http://discussions.apple.com/thread.jspa?messageID=4443213#4443213
If your current drive is a Pioneer, the stand-offs should be re-usable. If not, they may be able to be adjusted by not screwing them in fully, and then locking the thread with Loctite or similar.
The drive should be recognised in Blue Apple menu > About this Mac > More Info > Hardware > Disc Burning (System Profiler). If there are any problems, please post again. Good Luck.

System 8 for Power Mac 7500/100 on CD

Similar Messages

Maybe you are looking for