System.AccessViolationException Error while previewing report in ASP NET

HI,
     We are getting "System.AccessViolationException: Attempted to read or write protected memory." while previewing the report in ASP NET Application. It is working fine in 3 enviornments but the problem is happening in production enviornment.
Tools Used : VS2005, CR XI R2, SQL Sever 2005
Please help Me.
Regards,
Sathish

Hi
Give it a try by
Deleting the temp directory contents then provide read permission to IISWPG process for "temp" directory or just for testing purpose you can provide the full rights.
Hope this will help!!
Amit

Similar Messages

  • Error while previewing report  in Mobile

    Hi Experts,
    one of my client required to view reports in mobile for that i have done crystal report but while previewing it was throwing an error as attatched screen shot how to resolvwe this issue

    Hi Meghanath Sunkara...
    Please see SAP note 1986318 regarding the error you are receiving
    Hope Helpful
    Regards
    Kennedy

  • Error while previewing BI Publisher Report Output form Desktop

    Hi,
    i am getting below error while previewing Report Output form Desktop:
    javaw -Xmx256M -jar "C:\Program Files (x86)\Oracle\BI Publisher\BI Publisher Desktop\Template Builder for Word\jlib\RTF2PDFv2.jar" "C:\Users\mahlawat\AppData\Local\Oracle\BIPublisher\TemplateBuilderforWord\tmp\tb_param.xml"
    File not found.
    Please suggest
    Regards,
    Meetu

    Hi ,
    are u able to login into the bipublisher...check once..
    http://10.81.200.102:7777/xmlpserver
    generaly while connection to the desktop we will give the url at the bottom.
    the vpn is connected or not..
    Thanks,
    Ananth

  • Error while executing report in query designer

    Dear Folks,
    I am geting following error while executing report in query designer.
    Error:500 E
    an exception raised because of 0analysis pattern.
    Hence,i am unable to execute any report.
    Need help.
    Thanks

    Hi Kitu G,
    I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
    I would try and do the following:
    - Goto RSA1 > BI Content > BEx Web Template (BTMP)
    - Then double-click on Select Object.
    - Highlight all objects that start with 0ANALYSIS_PATTERN
    - Click on Transfer Selections, and then Install.
    If you can't do the above in prd, do it in DEV, then transport the objects to prd.
    After all this, try re-running your queries.
    Any questions/clarification just let me know
    Cheers.
    Darwin

  • Product Instance Registration Error: "System Failure: Error while retrieving xml file from database"

    Hi S9 installation Gurus,
    Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
    Detail of Problem:-
    After Susessful configuration of
    1) Foundation Services (Hyperion Shared Services)
    2) Essbase administration services
    3) Essbase Server
    4) Hyperion reporting and analysis
    5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
    Error Point: when i tick ckeck box in front of Product instance registration
    click next
    create instance
    click next
    instance name-Plan1
    Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
    server port: 8300 (system suggesting)
    tick on active instance
    click next
    Error Pop Up "System Failure: Error while retrieving xml file from database"
    Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
    SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
    SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
    SYSTEM_DB_USER=puser
    SYSTEM_DB_PASSWORD=GGAKFJ
    SYSTEM_DB_CATALOG=p1db
    SYSTEM_DB_TYPE=SQL
    INSTANCE=
    Note: puser (SQL Authenticated user)
    Thanks
    Kumar
    Edited by: user10385300 on Dec 4, 2008 5:44 AM

    This has been resolved at :- Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Unable to Log-in *SAP System Message : Error while reading a Dynpro*

    Hi,
    We are facing issues while logging-in through SAP logon 710.
    The system throws an error dialog box with the below message:
    SAP System Message : Error while reading a Dynpro
    At the OS level Java process  server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

    Hi Please find the contents of std_server.out below.
    stdout/stderr redirect
    node name   : server0
    pid         : 4124
    system name : KEC
    system nr.  : 01
    started at  : Mon Jul 27 15:44:57 2009
    [Thr 5656] MtxInit: -2 0 0
    CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
    CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
    CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
    CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
    CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
    CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
    CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
    CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
    CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
    CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
    CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
    CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
    SAP J2EE Engine Version 7.00   PatchLevel 110760.44 is starting...
    Loading: LogManager ... 250 ms.
    Loading: PoolManager ... 0 ms.
    Loading: ApplicationThreadManager ... 47 ms.
    Loading: ThreadManager ... 16 ms.
    Loading: IpVerificationManager ... 0 ms.
    Loading: ClassLoaderManager ... 16 ms.
    Loading: ClusterManager ... 93 ms.
    Loading: LockingManager ... 32 ms.
    Loading: ConfigurationManager ... 1032 ms.
    Loading: LicensingManager ... 0 ms.
    Loading: CacheManager ... 93 ms.
    Loading: ServiceManager ...
    Loading services.:
      Service runtimeinfo started. (16 ms).
      Service cross started. (31 ms).
      Service file started. (31 ms).
      Service memory started. (31 ms).
      Service timeout started. (16 ms).
      Service trex.service started. (32 ms).
      Service userstore started. (0 ms).
      Service jmx_notification started. (15 ms).
      Service p4 started. (62 ms).
      Service classpath_resolver started. (16 ms).
      Service deploy started. (3722 ms).
      Service MigrationService started. (31 ms).
      Service bimmrdeployer started. (0 ms).
      Service log_configurator started. (5177 ms).
      Service locking started. (0 ms).
      Service http started. (126 ms).
      Service naming started. (157 ms).
      Service failover started. (16 ms).
      Service appclient started. (31 ms).
      Service javamail started. (47 ms).
      Service ts started. (47 ms).
      Service jmsconnector started. (47 ms).
      Service licensing started. (15 ms).
      Service connector started. (93 ms).
      Service iiop started. (94 ms).
      Service configuration started. (16 ms).
      Service webservices started. (265 ms).
      Service dbpool started. (1204 ms).
      Service UT started. (0 ms).
    Jul 27, 2009 3:45:09 PM         com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: "     Error while reading a dynpro                                        ". This message is critical if it appears during the startup of the AS Java.
    Jul 27, 2009 3:45:09 PM  ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
      service com.sap.security.core.ume.service ================= ERROR =================
    Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details:      Error while reading a dynpro                                       
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
         at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
         at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
         at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
         at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
         at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
         at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
    Caused by: com.sap.security.core.persistence.datasource.PersistenceException:      Error while reading a dynpro                                       
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
         at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
         at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
         at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
         at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
         ... 6 more
    [Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
    Jul 27, 2009 3:45:09 PM             com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

  • Error while generating report in RAR

    Hello,
    We are getting error while generating reports in RAR.
    RAR runs sucessfully, can see there are risk, but we cannot dowload those file, usally we use to get zip file.
    or cannot see details ,
    gives error cannt be displayed.
    Thanks,
    DK

    Hello,
    we had same issues, this happed because the disk was full.
    Please check with your basis team if the disk is full.
    Thanks,
    Prasant

  • Failed to commit objects to server. Error while publishing reports from BW

    Hi,
    I am getting below error while publishing reports from BW to BO.
    "0000000001 Unable to commit the changes to Enterprise. Reason: Failed to commit objects to server : #Duplicate object name in the same folder."
    Anyone having any solution for this. Thanks in advance.

    Hi Amit
    It would be great if you could add a little info about how you solved this issue. Others might run into similar situations - I just did:-(
    Thank you:-)

  • Error while displaying report

    I am getting following error while displaying report in sap business one-
    <b>Internal error (-101) occured [Message 131-183]</b>
    I tried resintalling sap but it did not solved the problem.The reports are getting displayed on other pc's but not on my pc.

    Hi Yogesh,
           I haven't installed any patch on my client machine.
                                                                                    Regards,
                                                                                    Dilip Kumbhar

  • Timeout error while running Report

    Hi
    All,
    Windows 2000
    Oracle Report builder 10g
    Oracle developer suite 10g
    when I had OLD computer i was able to run report more than 10 minutes. Now, I got NEW computer and i am getting TIMEOUT error while running report more than 10 minutes.
    Any clue?
    Thanks,
    Vishal

    As Fs says it depends on how you're running the report.
    If you're running via a server then you need to make the change on that server or amend the URL you are using to run the report to add the enginereponsetimeout parameter.
    You can amend this parameter on the server either by using the Application Server Control as I described in my last post or by directly editing the config file. This file will be called <reportservername>.conf and can be found in the oracle_home/reports/conf directory.
    In this file look for the engine tag and see if the engineResponseTimeOut property is set.
    E.g:
    <engine id="rwEng" class="oracle.reports.engine.EngineImpl" initEngine="1" maxEngine="4" minEngine="1" engLife="50" maxIdle="20" callbackTimeOut="90000" engineResponseTimeOut="5">
    </engine>
    This value is in minutes so increase to a time larger than that it takes to run the report.
    If instead you're running the report via Report Builder on your own PC then look for a file called rwbuilder.conf in the same location on your PC and make the same change as described above.
    If this property isn't in the file then the engine isn't supposed to time out at all so the problem may well be something different. But to discount it try setting to a large value like 30.

  • Error while instantiating report Z_RD_ABSENCE_REPORT

    Hi Guys,
    we have just patched BWD, and while testing the broadcast setting i came across the following error.
    Error while instantiating report Z_RD_ABSENCE_REPORT 
    Notification Number RSBOLAP 014 
    I am opening report designer and when i publish via Bex Broadcaster this message is shown. I have checked SDN and sap market place but most of the soultion seem to focus on WAD.
    My feeling is that it is a JAVA error and is somethng basis might be able to fix.
    Please can anyone let me know if they have come across this problem before, and help would be much appriciated.
    Thanks
    Forhad

    Hello Forhad,
    RSBOLAP 014 is a issue regarding communication between ABAP (backend ) VS BI Java side.
    Read the note 937697 and follow his manual instructions.
    This note will start the BI Diagnostics. There you will see a red mark with RSBOLAP issue. COrrect this red mark following the recommendation on "Action" field.
    Good luck.
    Edward S. John

  • Error while opening report in Infoview

    I am getting following error while opening report in Infoview.
    Following is error generated in tomcat,
    com.businessobjects.rebean.wi.ServerException: Cannot open document. Error during import. (DX0005)
         at com.businessobjects.rebean.fc.internal.platformspecific.xml.ras21.SAXHandlerERRORS$SAXHandlerERROR.initElement(SAXHandlerERRORS.java:108)
         at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:187)
         at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:202)
         at com.businessobjects.rebean.fc.internal.platformspecific.xml.SXMLHandling$StructuredSAXHandler.startElement(SXMLHandling.java:202)
         at org.apache.xerces.parsers.AbstractSAXParser.startElement(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanStartElement(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
         at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
         at org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
         at org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown Source)
         at javax.xml.parsers.SAXParser.parse(Unknown Source)
         at com.businessobjects.rebean.fc.internal.ras21.XMLviaRAS21Decode.openDocument(XMLviaRAS21Decode.java:537)
         at com.businessobjects.rebean.fc.internal.ras21.RAS21DocumentComAdapter.openDocument(RAS21DocumentComAdapter.java:69)
         at com.businessobjects.rebean.fc.internal.ras21.RAS21ReportEngineComAdapter.openDocument(RAS21ReportEngineComAdapter.java:100)
         at com.businessobjects.rebean.fc.internal.ReportEngineImpl.openDocument(ReportEngineImpl.java:249)
         at org.apache.jsp.viewers.cdz_005fadv.viewCDZDocument_jsp._jspService(viewCDZDocument_jsp.java:267)
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:94)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:324)
         at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:292)
         at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:236)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:799)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:705)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:577)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:683)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: java.lang.Exception: Cannot open document. Error during import. (DX0005) (80043746)
         at com.businessobjects.rebean.fc.internal.platformspecific.xml.ras21.SAXHandlerERRORS$SAXHandlerERROR.initElement(SAXHandlerERRORS.java:100)
    Please help me to resolve the above problem
    Reagrds,
    Ramesh

    Hi Ramesh,
    It may seem like a lot of information, but from a debugging perspective it doesn't tell us much.
    You need to give some more info and even then it would probably be a good idea to call support.
    Can you tell us;
    Which version are you on?
    Can you open de document from another desktop intelligence machine, not only the one that it was built on?
    - This checks ; you can import the document; the structure of the document is fine (not corrupted).
    Can you refresh the document on that other machine?
    - This check ; the link to the universe is fine, the universe can be imported, the connection to the database is fine.
    What is your preference as a BOE user to view Deski documents?
    - Try a few others, so you know if the problem is with one type only (and which).
    Now you will have a few more pointers more as to where the problem lies.
    Even then it can be sheer size of the document, complexity of it, etc.
    Good luck,
    Marianne

  • Error while running report 10g

    DECLARE
         repid REPORT_OBJECT;
         v_rep VARCHAR2(1000);
    rep_status VARCHAR2(2000);
    BEGIN      
         repid := find_report_object('REPORT2');      
    SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
    set_report_object_property(repid, report_comm_mode, 1);
    set_report_object_property(repid, report_destype, cache);
    set_report_object_property(repid, report_desformat, 'PDF');
    set_report_object_property(repid, report_server, 'myserver');
    v_rep := run_report_object(repid);
    rep_status := report_object_status(v_rep);
    WHILE rep_status IN ('RUNNING', 'OPENING_REPORT', 'ENQUEUED')
    LOOP
    rep_status := report_object_status(v_rep);
    END LOOP;
    message(rep_status);
    IF rep_status = 'FINISHED'
    THEN
    web.show_document('http://localhost:8889/reports/rwservlet/showjobid' || substr(v_rep, instr(v_rep, '_', -1) + 1)
    || '?server = myserver');
    ELSE
    message('error while running reports-object ' || error_text);
    message(' ');
    clear_message;
    END IF;
    EXCEPTION
         WHEN OTHERS THEN
    message('error while running reports-object' || error_text );
    END;
    I have been trying the whole 5 days running this report but it is giving me error, i am making simple report which select all data and display from emp table, please help. Error I am getting is unable to run the report and Terminated_Report.

    Hi,
    Check this link...How to call a report in Forms 10g ?
    Hope this works...
    Hamid

  • Getting error while posting reports on Unix Process Scheduler Server

    Hello ,
    I am getting the below error while posting reports on Unix Process Scheduler Server .
    PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
    PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) HTTP transfer error.
    PSDSTSRV.14338 (2) [09/08/09 08:21:34 PostReport](3) Post Report Elapsed Time: 0.0900
    PSDSTSRV.14171 (10) [09/08/09 08:21:34 PostReport](1) (JNIUTIL): Java exception thrown: java.io.IOException: Stream closed.
    Please advise ,thank you.

    user5838027 wrote:
    Node name :PS_HTTP
    URL: http://ddas1020.dev.com:16000/psreports/hrdmo
    URI:SchedulerTransfer/hr90dmo
    URI Port: 16000
    Please let me know if any other info is needed.
    Thanks.
    typo...
    URL: http://ddas1020.dev.com:16000/psreports/hr90dmo
    Hopefully, your application URL looks like http://ddas1020.dev.com:16000/psp/hr90dmo/..., your URI host looks like ddas1020.dev.com (or corresponding ip address), and hhtp is checked.
    Did you also tried to give the web login/password ?
    Nicolas.

  • Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

    Hi Planning installation Gurus,
    Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
    OS: Vista Premium
    SQL Server 2005
    Essbase:9.3.1
    Error Message: "System Failure: Error while retrieving xml file from database"
    Details of error:::::::::::::::::::::::::
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    java.lang.NullPointerException
    at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    java.lang.NullPointerException
    at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
    wn Source)
    at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
    Can not get JDBC connection for SYS external changed actions.
    Can not get JDBC connection.
    Pls provide Solution

    Hi John,
    though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
    SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
    SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
    SYSTEM_DB_USER=windowsAuthentication
    SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
    SYSTEM_DB_CATALOG=plandb
    SYSTEM_DB_TYPE=SQL
    INSTANCE=
    my steps:
    Using SQL Server Management Studio
    Changed Widows authentication to SQL server authentication mode
    In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
    On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
    In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
    In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
    On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
    In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
    To restart SQL Server from SQL Server Management Studio
    To enable the sa login by using Management Studio
    In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
    On the General page, you might have to create and confirm a password for the sa login.
    On the Status page, in the Login section, click Enabled, and then click OK.
    In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
    On the General page, you might have to create and confirm a password for the sa login.
    On the Status page, in the Login section, click Enabled, and then click OK.}}}
    anything else should i change.................

Maybe you are looking for