System Admin Root Appears!
OK, I haven't seen this posted anywhere but this freaked me out this morning.
I have two accounts on my P'Book G4 under OS 10.4.8. One business, one personal, to keep things separate. I switch between them regularly. I usually have them both logged in and use fast user switching.
A couple of years ago, I enabled a root System Admin account, assigned a known password to it, used it to conduct some clean up on the HDD, and then, disabled it. It hasn't been used since.
This morning, I woke the 'Book up from slumber and logged on and to my surprise - lo and behold - in the toolbar list up top were not only my two accounts but a System Administrator account. This account was not logged in at the time but I was pretty surprised to see it in the list.
I clicked it to log in so I could see what was up and how about that - my known password for root accounts would not work. Nor would any of my other known passwords.
I quickly opened NetInfo Manager and disabled the root user. I logged off, restarted and presto - no Sys Admin account listed (at this time).
Has anyone experienced this? This seems extremely odd to me and I must say, I just don't like it.
Are there any guesses as to why this may be happening?
Can I prohibit this from re-occurring?
Thanks a lot for your thoughts and assistance.
Matt,
Has anyone else had physical access to your computer, along with the OS X installation disk(s)? If so, they could have used the disk to enable the root account and set a different password, using the password reset utility.
The most important protection for your computer is always physical security. It is not a good idea to leave your computer unattended, and an even worse idea to do so in the presence of the installation disks.
If there is no chance that this has occurred, there may be some problem with your Netinfo Database (it happens). Keep an eye on things, and if it occurs again, you might want to consider replacing the Netinfo Database (a relatively painless procedure). In the meantime, I recommend that you use your installation disk to reset the root password to one you know, and make it a good one. As always, leave the root accout disabled when you are done.
Scott
Similar Messages
-
IView and system admin objects appear changed or not registered when transported
Hi,
Recently we moved a few objects - iViews, pages and roles as epa and system admin objects as config archive and imported them manually to Test system. But when checked in the next landscape, the iView properties appear different. Eg. In Development system, the iView was unchecked for visibility option i.e. iView should not be visible. But when transported to test system, the property was checked and gave error. On reimporting, the same thing happened and we had to manually correct the property. This is not an expected behaviour and manual changes are not to happen after development changes.
Similarly, though config archive import showed the 2 new system objects in the respective location of Test system, the expected functionality was not working. I checked this by deleting one of them and manually creating the same entry and it worked fine. So I also had to delete the 2nd one and create a manual entry. The system admin objects we used pertained to System Configuration --> Content Mgmt--> Form Based Publishing --> Forms Availablity --> Folder Settings
We also moved kmcs and they are reflecting properly with correct folder permissions.
We don't understand why this is so occurring (iView and system admin entry appearing different or not getting registered )and never experienced such a case in previous projects. We don't want to face the issue going forward when transporting changes to staging and Prod systems.
Please assist as to what went wrong or any probable cause and solution for same.
Thanks,
JananiHi,
Has anyone faced such a situation before and know the reason for same ?
Regards,
Janani -
Error while reading the PO in the Backend system. Inform system admin
Hi All,
We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
No error messages or logs in RZ20, SLG1 any where.
All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
It was working fine till a week ago and suddenly this problem is coming.
We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
Now this issue is coming up in test system where as development system is working fine.
Please let us know where to look and how to resolve this issue.
A quick response would be highly appreciated.
Regards,
TejaI am facing the same issue with one PO in the Production system.
SRM 5.0 , R/3 4.6C Extended classic scenario.
I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
Error while reading the PO in the Backend system. Inform system admin.
Message no. BBP_CF010
I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
Any inputs would be greatly appreciated. Please throw some light on this issue.
Krishna -
Issue while uploading the PAR file thru system admin- AdministrationConsole
Hi All,
I have downloaded the PAR file "com.sap.portal.navigation.lightdetailednavigationtree.par.bak" from system admin->support->Portal Runtime ->browse deployment->Web-Inf->deployment->PCD.
after downloaded to the desktop for manual change in one of the JSP file rather than importing into NWDS. I have removed the bak from the file and added the .Zip to the file and i extracted the file.
here inside i got the three folders i.e WEB-INF,PORTAL-INF and file_list. now i went to jsp file called "LightDetailedNavigationTree.JSP" , changed one small property value in the code from false to true. after that i again zip the folders strcuture make the file name as original in the form of .PAR file. now i am trying to upload it in the portal thru system admin->portal runtime->administration console, but i am getting the deployment error as mentioned in the below.
even though with error, the wrong version of the par file with extension .err was saved in the PCD folder strcture, and original file also still exists. now i wanted to remove the wrong version of the file from PCD, what is the procedure to delete the wrong version, here in administration console i found one button clean , but i could not able to locate the wrong file version , only original right version showing up in the clean dropdown??
Can u tell me what is the procedure to edit the PAR file manually after downloaded to the desktop, rather than going edit thru NWDS??
if we need to upload the PAR file after changes, do we need to delete the original PAR file before we upload the new version of the same PAR or it will be automatically overwrite the original file with the same name??
Still i am getting confusion, please let me know how to edit the PAR file manally and how to upload the PAR file with out any isse while uploading it in the portal thru system admin->administration console??
Any pointers in this regard would be the great help to me??
Error as i got while uploading the par file after the changes manually. (com.sap.portal.navigation.lightdetailednavigationtree.par)
2011-01-24_07-40-18
Application upload failed: com.sap.portal.navigation.lightdetailednavigationtree.par
java.util.zip.ZipException: Error opening zip file /usr/sap/BIS/DVEBMGS13/j2ee/cluster/server0/apps/sap.com/irj/servlet_jsp/irj/root/web-inf/deployment/pcd/com.sap.portal.navigation.lightdetailednavigationtree.par
* at java.util.zip.ZipFile.open(Native Method)*
* at java.util.zip.ZipFile.<init>(ZipFile.java:140)*
* at java.util.zip.ZipFile.<init>(ZipFile.java:155)*
* at com.sapportals.portal.prt.deployment.ArchiveIterator.iterate(ArchiveIterator.java:39)*
* at com.sapportals.portal.prt.deployment.UploadProcess.upload(UploadProcess.java:60)*
* at com.sapportals.portal.prt.deployment.DeploymentManager._uploadArchive(DeploymentManager.java:835)*
* at com.sapportals.portal.prt.deployment.DeploymentManager.uploadArchive(DeploymentManager.java:474)*
* at com.sapportals.portal.prt.deployment.DeploymentManager.uploadApplication(DeploymentManager.java:319)*
* at com.sap.ip.portal.admin.portalanywhere.ArchiveUploader.doUpload(ArchiveUploader.java:116)*
* at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)*
* at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)*
* at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)*
* at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)*
* at java.lang.reflect.Method.invoke(Method.java:391)*
* at com.sapportals.portal.prt.component.AbstractPortalComponent.handleRequestEvent(AbstractPortalComponent.java:706)*
* at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:412)*
* at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:249)*
* at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)*
* at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:707)*
* at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:235)*
* at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:541)*
* at java.security.AccessController.doPrivileged(AccessController.java:246)*
* at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:430)*
* at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)*
* at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)*
* at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)*
* at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)*
* at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)*
* at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)*
* at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)*
* at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)*
* at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)*
* at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)*
* at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)*
* at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)*
* at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)*
* at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)*
* at java.security.AccessController.doPrivileged(AccessController.java:219)*
* at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)*
* at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)*
Can you please what are the steps if any specific while editing the PAR file manually and uploading it with out any issues??
Thanks in advance.
Regards,
PortalUser
Edited by: PortalUser100 on Jan 24, 2011 6:01 PM
Edited by: PortalUser100 on Jan 24, 2011 6:04 PM
Edited by: PortalUser100 on Jan 24, 2011 6:05 PMHi Shusil,
Thanks for your reply.
I have one more dought here.
the PAR file of lightdetailnavigation has been modified thru NWDS and deployed the PAR file by adding the required JARS.
Now my question is, the application server which i am used as local portal server installed in my desktop.
now this depoyed latest par file i have picked it from the workspace in the local desktop, and i am planning to upload the same PAR file in of the sandbox portal system of client , will it update successfully in the new portal apart from the deployed portal??
i am here used the path system admin->support->portal runtime -> administrate console ( this in the sand box system to upload the par file which was deployed in the local portal server in my desktop.
Thanks,
Portal user -
System Admin and Admin Problem...
Can any one tells me the different between system admin and admin?
It seems like system admin is messing up my file permissions, and it seems like system admin has more control than the admin (me)...
I had this experience today: everytime when I create a folder, the permission's gone under "system", I was not able to have any folder action nor create a new folder under it.
I search the forum with solutions and I think I've fixed it and it works fine now, but the permission is still not under my account name; it goes under "root" (system Admin).
Any one has a solution for this?
And how can I delete the system admin account?
Thanks,
ArnoldI input dscacheutil -q user in terminal, and I got this:
Would it help to solve my problem? :P I'm wondering if anyone has the same problem too?
name: _amavisd
password: *
uid: 83
gid: 83
dir: /var/virusmails
shell: /bin/tcsh
gecos: Amavisd User
name: _appowner
password: *
uid: 87
gid: 87
dir: /var/empty
shell: /usr/bin/false
gecos: Application Owner
name: _appserver
password: *
uid: 79
gid: 79
dir: /var/empty
shell: /usr/bin/false
gecos: Application Server
name: _ard
password: *
uid: 67
gid: 67
dir: /var/empty
shell: /usr/bin/false
gecos: Apple Remote Desktop
name: _atsserver
password: *
uid: 97
gid: 97
dir: /var/empty
shell: /usr/bin/false
gecos: ATS Server
name: _calendar
password: *
uid: 93
gid: 93
dir: /var/empty
shell: /usr/bin/false
gecos: Calendar
name: _clamav
password: *
uid: 82
gid: 82
dir: /var/virusmails
shell: /bin/tcsh
gecos: Clamav User
name: _cvs
password: *
uid: 72
gid: 72
dir: /var/empty
shell: /usr/bin/false
gecos: CVS Server
name: _cyrus
password: *
uid: 77
gid: 6
dir: /var/imap
shell: /usr/bin/false
gecos: Cyrus IMAP User
name: _devdocs
password: *
uid: 59
gid: 59
dir: /var/empty
shell: /usr/bin/false
gecos: Developer Documentation
name: _eppc
password: *
uid: 71
gid: 71
dir: /var/empty
shell: /usr/bin/false
gecos: Apple Events User
name: _installer
password: *
uid: 96
gid: -2
dir: /var/empty
shell: /usr/bin/false
gecos: Installer
name: _jabber
password: *
uid: 84
gid: 84
dir: /var/empty
shell: /usr/bin/false
gecos: Jabber User
name: _lp
password: *
uid: 26
gid: 26
dir: /var/spool/cups
shell: /usr/bin/false
gecos: Printing Services
name: _mailman
password: *
uid: 78
gid: 78
dir: /var/empty
shell: /usr/bin/false
gecos: Mailman user
name: _mcxalr
password: *
uid: 54
gid: 54
dir: /var/empty
shell: /usr/bin/false
gecos: MCX AppLaunch
name: _mdnsresponder
password: *
uid: 65
gid: 65
dir: /var/empty
shell: /usr/bin/false
gecos: mDNSResponder
name: _mysql
password: *
uid: 74
gid: 74
dir: /var/empty
shell: /usr/bin/false
gecos: MySQL Server
name: _pcastagent
password: *
uid: 55
gid: 55
dir: /var/pcast/agent
shell: /usr/bin/false
gecos: Podcast Producer Agent
name: _pcastserver
password: *
uid: 56
gid: 56
dir: /var/pcast/server
shell: /usr/bin/false
gecos: Podcast Producer Server
name: _postfix
password: *
uid: 27
gid: 27
dir: /var/spool/postfix
shell: /usr/bin/false
gecos: Postfix User
name: _qtss
password: *
uid: 76
gid: 76
dir: /var/empty
shell: /usr/bin/false
gecos: QuickTime Streaming Server
name: _sandbox
password: *
uid: 60
gid: 60
dir: /var/empty
shell: /usr/bin/false
gecos: Seatbelt
name: _securityagent
password: *
uid: 92
gid: 92
dir: /var/empty
shell: /usr/bin/false
gecos: SecurityAgent
name: _serialnumberd
password: *
uid: 58
gid: 58
dir: /var/empty
shell: /usr/bin/false
gecos: Serial Number Daemon
name: _spotlight
password: *
uid: 89
gid: 89
dir: /var/empty
shell: /usr/bin/false
gecos: Spotlight
name: _sshd
password: *
uid: 75
gid: 75
dir: /var/empty
shell: /usr/bin/false
gecos: sshd Privilege separation
name: _svn
password: *
uid: 73
gid: 73
dir: /var/empty
shell: /usr/bin/false
gecos: SVN Server
name: _teamsserver
password: *
uid: 94
gid: 94
dir: /var/teamsserver
shell: /usr/bin/false
gecos: TeamsServer
name: _tokend
password: *
uid: 91
gid: 91
dir: /var/empty
shell: /usr/bin/false
gecos: Token Daemon
name: _unknown
password: *
uid: 99
gid: 99
dir: /var/empty
shell: /usr/bin/false
gecos: Unknown User
name: updatesharing
password: *
uid: 95
gid: -2
dir: /var/empty
shell: /usr/bin/false
gecos: Update Sharing
name: _uucp
password: *
uid: 4
gid: 4
dir: /var/spool/uucp
shell: /usr/sbin/uucico
gecos: Unix to Unix Copy Protocol
name: _windowserver
password: *
uid: 88
gid: 88
dir: /var/empty
shell: /usr/bin/false
gecos: WindowServer
name: _www
password: *
uid: 70
gid: 70
dir: /Library/WebServer
shell: /usr/bin/false
gecos: World Wide Web Server
name: _xgridagent
password: *
uid: 86
gid: 86
dir: /var/xgrid/agent
shell: /usr/bin/false
gecos: Xgrid Agent
name: _xgridcontroller
password: *
uid: 85
gid: 85
dir: /var/xgrid/controller
shell: /usr/bin/false
gecos: Xgrid Controller
name: chowmein
password: ******
uid: 501
gid: 501
dir: /Users/chowmein
shell: /bin/bash
gecos: Arnold Chow
name: daemon
password: *
uid: 1
gid: 1
dir: /var/root
shell: /usr/bin/false
gecos: System Services
name: nobody
password: *
uid: -2
gid: -2
dir: /var/empty
shell: /usr/bin/false
gecos: Unprivileged User
name: root
password: ******
uid: 0
gid: 0
dir: /var/root
shell: /bin/sh
gecos: System Administrator -
5 Systems Admin relationship tips for end users
"you know how unlikely it would be for them to host a relationship-fixing TV show. Were they born like this, or did IT support requests just grind them into jaded powder?"
More eloquent and beautiful words I have not read before :)For SysAdmin Appreciation Day, one of our security researchers, Cameron Camp, wrote a blog post for the end user that I think everyone here could appreciate. While he did leave out the daily tribute of coffee and bacon, I'll let that one slide for now. :)If you’ve spent much time interacting with system administrators, you know how unlikely it would be for them to host a relationship-fixing TV show. Were they born like this, or did IT support requests just grind them into jaded powder?With a combination of endless patches, glitches, and caffeinated techno pulsing in the background, they do get edgy (and court the look of pallor). Want to mend your systems admin relationship? On this Systems Administration appreciation day, we give you a few tips to help mend fences...Read the list and the rest of the postHERE
This topic first appeared in the Spiceworks Community -
Old IMAC with 10.5.6 OSX. Forgot Administrator password (which I had already changed.) Followed instructions as per http://support.apple.com/kb/HT1274
Started up from the original OSX install disc 1 and selected "Password reset" from "utilies" in Installer. But HD icon doesn't show up. (Only install disc and admin root available:no good as the support website underscores: Important: Do not select "System Administrator (root)". This is actually the root user. You should not confuse it with a normal administrator account.).
What can I do?
Thanks for your suggestions. AntonioNot familiar with that version of OS X but try using Terminal and type in resetpassword. If that brings up a password reset screen is your original username shown?
-
Error while deploying .par file through system admin
I have tried to modify logon.par file but when I was try deploy that file again through system admin then I got this error...................
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com.sapportals.portal.ume.component.logon.SAPMLogonComponent.
Exception id: 10:19_11/05/07_0006_13454550
See the details for the exception ID in the log file
Please help me out I am using sneak preview 7.0
Detailed Error Log & Trace
=========================================================
Exception ID:08:55_11/05/07_0002_13454550
[EXCEPTION]
com.sapportals.portal.prt.component.PortalComponentException: Error in init method
Component : com.sap.portal.support.browse.default
at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:251)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refresh(PortalComponentContextItem.java:267)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getContext(PortalComponentContextItem.java:312)
at com.sapportals.portal.prt.component.PortalComponentRequest.getComponentContext(PortalComponentRequest.java:385)
at com.sapportals.portal.prt.connection.PortalRequest.getRootContext(PortalRequest.java:435)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:607)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationException: Could not instantiate implementation class com.sapportals.portal.ume.component.logon.SAPMLogonComponent of Portal Component com.sap.portal.support.browse.default because: Could not find implementation class
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:242)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getComponentInstance(PortalComponentItemFacade.java:160)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponentInstance(PortalComponentItem.java:732)
at com.sapportals.portal.prt.component.PortalComponentContext.getComponent(PortalComponentContext.java:103)
at com.sapportals.portal.prt.component.PortalComponentContext.init(PortalComponentContext.java:242)
... 26 more
Caused by: java.lang.ClassNotFoundException: com.sapportals.portal.ume.component.logon.SAPMLogonComponent
Found in negative cache
Loader Info -
ClassLoader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@3389d1]
Parent loader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@1b7a6fa]
References:
not registered!
No resources !
at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:360)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:219)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getInstanceInternal(PortalComponentItemFacade.java:228)
... 30 moreHi,
Open ur PAR file then double click on PORTAL-INF -> lib->Select 2 jar files
1.com.sap.portal.runtime.logon_api.jar
2.umelogonbase.jar
Copy those jar file & paste in to lib in ur application.
Regards,
Senthil kumar K. -
Can I change system administrator (root) password?
I have forgotten my name and password to get into my MacBook. I have imputed the OS X disc and found the reset password bit but it only gives me option to reset my iPhone or system administrator (root) but on mac support it says not to click that root option? So confused can't someone help? Can I click the root option or will it wipe files? Thanks
Hi Dray,
I've not seen that, but depening on OSX version, see if any of this helps...
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Utilities from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access the Menubar at top.
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Reset Password from the Installer menu at the top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Reset Password.
Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/
Then Reset your Keychain...
http://support.apple.com/kb/TS1544
https://discussions.apple.com/thread/5225064?tstart=0 -
Attribute for user contains errors. Inform system admin
Hello,
We've got an issue with shopping carts created by a user that was deleted from system. When trying to see in Monitoring Shopping Carts header or item details of a given sc. A web error occurs:
The URL http://srp.srm.gruposalinas.com.mx:8000/sap/bc/gui/sap/its/bbpsc11/! was not called due to an error.
Note
The following error text was processed in the system SRP : Attribute for user contains errors. Inform system admin.
The error occurred on the application server srm-pro_SRP_00 and in the work process 2 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: OUTPUT_EXPRESS_MESSAGES of program SAPLBBP_SC_UI_ITS
Form: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
Module: EXTERNAL_SCREEN_DETERMINE of program SAPLBBP_SC_UI_ITS
We've cheked SAP NOTE 312058-BBPPU99: Error: Attribute for ... is missing. Inform ...
But it seems that none of the information applies to us, since this issue is only present for Shopping carts that were created by this deleted user.
So we tried to re-assing one of this sc, chaning PARTNER_NO,ADDR_NR
ADDR NP data in table CRMD_PARTNER according to a new given user, but it didn't work. So we need to know how to re-assing this sc or perhaps how to find what specific attribute is missing.
Any advice is welcome.
Thanks in advance.Hi
<b>Which SRM version are you using ? This is an SRM error message.</b>
The manager role should be enough to change user attribute. The transaction is BBPATTRMAINT. Employee role should have BBPUM02 or BBPAT05 to change their own attribute.
<u>Please check whether the User ID you are using to Log into BBP_PD (and seems to be assigned in the org structure also)is consistent and has no errors in tcode USERS_GEN. You should check the user, it's not set up properly in USERS_GEN Transaction, Else repair the user.
To maintain the user attributes you must have the Administrator role.. Your user should have role SAP_BBP-STAL_ADMINISTRATOR and be integrated in the org structure. your user must be integrated in SRM organizational structure. To see which attributes are missing, you can click on the user in PPOMA_BBP to see details, and go to last tab "Check". This will list all required attributes depending on used scenarios (so you may not require all of them). You can also use transaction BBP_ATTR_CHECK to check user's attributes for a particular scenario.</u>
<b>Please go through the following links as well -></b>
bbp_mon_sc attributes
Re: FM for attribute's value assignation in PPOMA ?
Note 751022 - Monitor Shopping Cart: Item deletion causes termination
Re: User Settings are not saved
Re: Not able to generate user users_gen
Re: SRM organization plan...
Re: User creation error
<u>Hope this will definitely help. Do let me know.</u>
Regards
- Atul -
WebDynpro for Abap Test failed (System Admin/Support/WD)
Hello,
I'm using EP 7.0 and I'm trying to test travel&expenses (Ehp3) WD for Abap from System Admin/Support Desk: Integration of SAP Applications/WebDynpro and we get the following error: Exception in SAP Application Integrator occured: Unable to parse template...the problem occured at position 275. Cannot process expression <IView.PCDUnit.ShortID> because Unable to get PCD Unit com.sap.portal.appintegrator.sap.WebDynpro.
System contector test is ok. Please, could you help me?
Thank youHello Michael,
Ok, I forget system connector and support tests. Web AS parameter are supposed to be ok:
Web AS Host Name: host.domain:port (from smicm tx)
Web AS Host Name: /sap/bc/webdynpro/sap/
Web AS Protocol: http
but the SAP Web AS Connection test fails. When trying to execute the iView it works. Does it mean that is it correct? Why WAS connection test fails?
In the other hand, when iView is displayed, it asks for user and password because the R/3 user is locked. Why R/3 user is locking everytime?
Thank you&Regards -
Officejet 6600 LOCKED AND DISABLED WIRELESS -- Im the System Admin?
I am the system admin and I somehow disabled my wireless and locked the HP Officejet 6600 down. I can not restore to defaults. I can't do anything with the printer? Can someone help? MacBook Pro Latest version of software.
Hi DG13,
Welcome to the HP Support Forums! I see you have disabled the wireless settings on your MacBook Pro and have locked the HP Officejet 6600 down. Please follow the steps listed below:
1. Plug in your USB (You will need a USB to re enable the wireless settings)
2. Select the Device Administration section
3. Now re enable the wireless and whichever features you had disabled
Please let me know the outcome, I will watch for your reply.
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping! -
Acct assignment cat. of item not in user data; Inform system admin
Hi all,
We are on a SRM EBP 5.0 project and we are getting the following error when we try to create a purchase order from the purchasers login.
"Acct assignment cat. of item not in user data; Inform system admin"
The complete details of the screen shot are as follows:
The following error text was processed in the system DS1 : Acct assignment cat. of item not in user data; Inform system admin.
The error occurred on the application server lndnysap1_DS1_01 and in the work process 0 .
The termination type was: TH_RES_FREE
The ABAP call stack was:
Form: ABORT_PO of program SAPLBBP_PO_UI_ITS
Form: ADD_TO_MSG_LOG of program SAPLBBP_PO_UI_ITS
Form: ADD_TO_MSG_LOG_MULTI of program SAPLBBP_PO_UI_ITS
Form: SET_PRICING of program SAPLBBP_PO_UI_ITS
Form: DETERMINE_EXTERNAL_SCREEN of program SAPLBBP_PO_UI_ITS
Module: DETERMINE_EXTERNAL_SCREEN of program SAPLBBP_PO_UI_ITS
We did the following steps :
Created shopping cart- employer and WF triggered apprd. by manager.
Purchaser did "Carry Out Sourcing ", and if we say "Create Purchase Order", the PO gets created with a information message that "Incomplete purchase order 11/1 is created "
When we go to "Process Purchase Order" for the completion of the same. If we see Follow-on documents "Purchase Order Held" occurs.
In the tab Item Data details Pricing tab we get this error.
Do any of the SRM gurus can suggest us what to do?
In our admin logon it shows
"Server for pricing is not running. Start Server" occurs after every run of this process purchase order from the purchasers login, though our IPC is working fine.
Will be of great help if somebody replies soon.
Sincerely,
Sridhar.Hi,
IPC has to be configured.
Please check the following threads :
https://forums.sdn.sap.com/click.jspa?searchID=211089&messageID=2714527
https://forums.sdn.sap.com/click.jspa?searchID=211089&messageID=2715019
Kind regards,
Yann -
All Transactions Report to Non-System Admin
Is it possible to broadcast a report of all transactions to a non-system admin?
Background: Project Manager who is not a System/Travel admin, would like monthly reports of all expense reports and expenses from system. Since reporting is based on role assignment is this possible? I have tried using Broadcast but user still only sees data for his direct reports. thnka you in advance for your help!Hi Juan,
this should be handled very careful as you can get in trouble if you expose data to people that are not authorized to see it. So think twice before you do that.
what is that project manager supposed to see? If he's allowed to see any detail, you might create a role that has no access restrictions. In this case, the report will show all expense reports. This way there is clear transparency in the system about authorizations
Broadcasting works as well. In broadcasting you should deselect the "user specific" flag. In this case, the report runs with the authorizations of the broadcast creator (the system admin). It is probably useful to create a specific report for that and assign it to a work center view the system admin has assigned. However this way the system admin provides information to people that are not authorized by their role. So their needs to be another agreement in the organization to be on the safe side.
Regards,
Steffen -
You have encountered an unexpected error. Please contact the System Adminis
Hii guys
EBS is installed.
I'm not able to login via IE in EBS and but i'm able to login EBS via FireFox.
I get the following error.
You have encountered an unexpected error. Please contact the System Administrator.
I've run the following query while logged in the system as apps user
SQL> select user_name from applsys.fnd_user where user_name = 'SYSADMIN;
and i get the following result
USER_NAME
SYSADMIN
What am i doing wrong .Kindly help
FahadFahad,
This is a duplicate post, I suggest you check the other thread:
You have encountered an unexpected error. Please contact the System Adminis
Re: You have encountered an unexpected error. Please contact the System Adminis
Thanks
Maybe you are looking for
-
I had no problems with my computer until someone told me to check apple's hardware test and now this code has me worried. Should I contact samsung about this and get a replacement drive or is it just apple doing it because its not from apple. One min
-
Suddenly can't open .eps files in FW8
Hi all- I suddenly can't open .eps files in FW8. Starts to open and then says "Internal error occurred" Text tool is also acting up. I think it may be related to one of the extensions I downloaded from the Adobe Exchange. Or, maybe it was somet
-
Hi Experts, I need to populate around 10 standard SAP fields and 8 custom fields on MSEG(material document item table) record, WHILE the material document is creating or CONFIRMING the delivery or SHIPEMENT confirmation. In this process I found an a
-
Hi. Updated my work PC to Photoshop CC 2014. Select/Focus Area is shown in drop down menu. I can open the Focus Area panel, but it does nothing to the image regardless of what setting I select in the sliders. When I place the cursor over the image wi
-
I am new to the SDN and to ABAP. Does anyone have an example of how to use the List_download function? I have a report I need to download to a file. I think the List_download function would help?