System Administration Operations Scheduled Backups does not appear in ACS 5.0.0.21

Hello!
I want to do shedule backup. According to user guide:
You can create a scheduled backup only for the primary instance. To create, duplicate, or edit a scheduled
backup:
Step 1 Choose System Administration > Operations > Scheduled Backups.
But System Administration > Operations > Scheduled Backups does not appear in ACS 5.0.0.21.
How can i do backup ?

Hi Alexander,
Could you please confirm on which link you found these instructions?
It looks like these are the instructions from the ACS 5.1 user guide, but on ACS 5.0 we don't have a similar option.
Regards,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Similar Messages

Everytime i try to download it says i need to contact system administrator but i am on system administrator but it still does not download

everytime i try to download it says i need to contact system administrator but i am on system administrator but it still does not download

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

Hi I have a Mac Book and I am trying to turn on my icloud. However when I go to system preferences the icloud icon does not appear anywhere. Where can I find it?

Hi I have a Mac Book and I am trying to turn on my icloud. However when I go to system preferences the icloud icon does not appear anywhere. Where can I find it

it's not under "internet and wireless" in system preferences?

System default email client (Thunderbird) does not appear in mailto applications.

I should like to use Thunderbird as the mailto application in Firefox. The only options listed for mailto are GMail, Yahoo mail, always ask, and choose application; use default does not appear.

I've solved this. Clicking "use other" in mailto applications, "cancel" when a window opens to select application, then clicking an application other than mailto, and the system default mail client is selected. Seems a bit user unfriendly. I'm running Firefox 24 under Ubuntu 13.04 BTW.

Deployed KM Scheduler Task Does Not Appear in Global Services / Scheduler T

Hi All,
I've deployed a portal service and a KM scheduler task in the same DC but cannot see the scheduler task listed under System Admin -> System Config -> Knowledge Management -> Content Management -> Global Services -> Scheduler Tasks.
The service works correctly and performs its periodic processing once on initialisation of the service, and I can see the resulting log statements to make sure it has worked.
Both the service and the scheduler task are packed inside the same DC, which builds and deploys without any errors.
There are no errors in the log regarding the deployment of the DC, or the scheduler task.
There is a log statement about registering the classloader for the DC, which I assume is the statement in the IRFServiceWrapper init() that goes:
CrtClassLoaderRegistry.addClassLoader(this.getKey(), this.getClass().getClassLoader());
But I still dont see the task listed in Global Services -> Scheduler Tasks.
Does anyone know what might be causing this or how to diagnose the problem further?
Cheers,
Steve

Hi Srini,
No it doesn't it just has the run method which is generated automatically.
I have created a local Portal Application project, which is not in a DC, and this also does not have a default constructor ether but appears in the Scheduler Tasks list as soon as it is deployed.
I also tried to create a Portal Applicaiton DC and Portal Applicaiton (Packaged as SDA) DC and despite the scheduler task being the same, both the DC tasks do not appear in the Scheduler Tasks.
The only one I can get to work is the local Portal Application project. This is no use as we cant store this in DTR (unless someone can explain how to do this???).
The Portal Application project packages up the RF Framework JARS inside its PAR file, but the DC and SDA projects dont, so I tried including them via an Assembly Public Part to an External Library DC, which does include the JARs in the deployment files but they still dont appear in the Scheduler Tasks.
Has anyone out there got a working Scheduler Task in a Portal Application DC?
Cheers,
Steve

System settings "Keyboard & mouse" Dialogue does not appear

Hi,
I'm using my MacBook Pro with latest version of Mac OS X Leopard (10.5.4).
I bought recently a new Apple Bluetooth Keyboard and a Bluetooth Mighty Mouse. I connected them by using the Wizard in System Settings --> Bluetooth.
Unfortunately the Mouse behavior is a bit too slow from my perspective, so I wanted to speed it up a bit.
Therefore I tried to enter the "Keyboard & Mouse" Menu in "System Settings". Once I click on the Icon for "Keyboard & Mouse" the dialogue box turns to the grey background only without any settings on top of it.
I could go back to "all settings" but the Keyboard & Mouse dialogue doesn't open. Reboots did not help ...

Well,
trackpad works fine. Unfortunately "Keyboard & Mouse" dialogues does not work either once I have no connected external mouse. My USB Logitech mouse as well, but I'd like to move from Trackpad and Logitech mouse to MightyMouse.

Encrypt iphone backup does not appear at iTunes

hi
I do an encrypted back up to my iPhone4 4.2.1 and upgrade to 4.3.3 and when i complete the upgrade i did not find the encrypt iphone backup at iTunes
please help me
regards

i forgot to till you that the folder of the back up appear at "" C:\Users\dr\AppData\Roaming\Apple Computer\MobileSync\Backup "" but at itune did not

TS1760 Time machine backup does not appear Time Capsule

I have backed up my imac on my Time Capsule using Time Machine. Now, I want to restore this backup on my Macbook so that both computers are the same.
However, when I attach the Time Capsule to the Macbook, I do not see the backup that I just made from the imac. There is nothing to restore.
What to do?

You have to start with the Mac OS X DVD that came with your computer to restore your backup

CHARM Tab does not appears -- solution manager

Hi Experts,
I want to configured CHARM but in tx SOLAR_PROJECT_ADMIN in System Landscape -- Change Request Tab does not appear
Also tx solar01 is locked! the project doc for example . But in scope a have not checked the link.
Any clue?

Hello,
In SOLAR_PROJECT_ADMIN are you creating a project or runing an analysis?
The Analysis screen is not tabbed, it is a tree.
Change request management apears under Solution.
When you create a project, there is not a Change Management Tab.
So are you refering to creating the project or performing the Analysis?
Regards,
Paul

Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB

Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,

yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB"   (usb device tree)
USB Bus:
Host Controller Location:          Built In USB
Host Controller Driver:          AppleUSBOHCI
PCI Device ID:          0x0026
PCI Revision ID:          0x0000
PCI Vendor ID:          0x106b
Bus Number:          0x18
Hub in Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x1002
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version:          0.0e
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Imation
Product ID:          0x0002
Vendor ID:          0x0718
Hub in Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x1002
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version:          0.0e
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Imation
Product ID:          0x0002
Vendor ID:          0x0718
USB Bus:
Host Controller Location:          Built In USB
Host Controller Driver:          AppleUSBOHCI
PCI Device ID:          0x0026
PCI Revision ID:          0x0000
PCI Vendor ID:          0x106b
Bus Number:          0x19
LaCie d2 DVDRW USB:
Capacity:          451.76 MB
Removable Media:          Yes
Detachable Drive:          Yes
BSD Name:          disk2
Version:          0.00
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          LaCie
OS9 Drivers:          No
Product ID:          0x1011
Serial Number:          FFFFFFFFFFFF
S.M.A.R.T. status:          Not Supported
Vendor ID:          0x059f
LaCie d2 DVDRW USB:
Capacity:          451.76 MB
Removable Media:          Yes
Detachable Drive:          Yes
BSD Name:          disk2
Version:          0.00
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          LaCie
OS9 Drivers:          No
Product ID:          0x1011
Serial Number:          FFFFFFFFFFFF
S.M.A.R.T. status:          Not Supported
Vendor ID:          0x059f

Boot system flash: does not appear on 2960 running config

Dear friends,
On the 2960, i have two .bin images and i am pointing to the latest one.
However, the boot system flash: command along with the new image does not appear in the running config but it appears in the
show boot command.
t3a.sidradc.dmz.01#dir flash:
Directory of flash:/
    2 -rwx        2131   Jan 3 2010 07:30:45 +03:00 private-config.text
    4 -rwx     8040418   Mar 1 1993 05:31:51 +03:00 c2960-lanbasek9-mz.122-50.SE3.bin
    5 -rwx         676   Jan 3 2010 07:28:50 +03:00 vlan.dat
    6 drwx         128   Mar 1 1993 03:02:32 +03:00 c2960-lanbasek9-mz.122-44.SE6
546 -rwx        4120   Jan 3 2010 07:30:45 +03:00 multiple-fs
548 -rwx        9001   Jan 3 2010 07:30:45 +03:00 config.text
32514048 bytes total (21123072 bytes free)
t3a.sidradc.dmz.01(config)#boot system flash:c2960-lanbasek9-mz.122-50.SE3.bin
t3a.sidradc.dmz.01(config)#exit
t3a.sidradc.dmz.01#wr
Building configuration...
[OK]
t3a.sidradc.dmz.01#sh boot
BOOT path-list      : flash:c2960-lanbasek9-mz.122-50.SE3.bin
Config file         : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break        : no
Manual Boot         : no
HELPER path-list    :
Auto upgrade        : yes
Auto upgrade path   :
NVRAM/Config file
      buffer size:   65536
Timeout for Config
          Download:    0 seconds
Config Download
       via DHCP:       disabled (next boot: disabled)
t3a.sidradc.dmz.01#sh run | inc boot
boot-start-marker
boot-end-marker
Are you aware of any reasons for this?
Thanks a lot
Gautam

and the other being the issue where IOS can return the prompt before it's done unpacking the files
Ok, now what EXACTLY is the appliance and IOS version? The only time I know of this bug is the Metro Ethernet (ME) switches and when the current appliance is upgraded FROM an IOS version 15.2(1)S.
But there is a "workaround" which Cisco doesn't want to publish (don't ask me why not): Use "archive tar /x" and, optionally, delete the old IOS sub-directory.
Personally, I wouldn't recommend anyone using the "copy the BIN file" method unless you know what you are doing or you've put extra measures in place. The "archive /x tar" and/or "archive download-sw" was developed so that it could be automated and the operator can see the result at the end. The "copy the BIN file" method doesn't give anyone a result whether or not the file was copied or not or was the file copied completely.
Regularly, I would upgrade our switches (2960/2960S, ME-3800X, 3560E/3560CG, 3750X) fleet using the "archive download-sw" method and I don't use scripts. I just copy-and-paste the command. So far, since 2009, I've "lost" only 6 switches when I upgraded the switch to upgrade the wrong file (another IOS bug on it's own) and I had to physically show up and upgrade using ROMmon. Every time I would upgrade, about 900 switches (some in a stack), it would take me about 4 days. Even though I work with three guys who's very good at almost any scripting but we've come to a unanimous conclusion NOT to use scripting.
Moving on, if "copy the BIN file" is still a preferred choice, I would like to know how do you go about verifying the file was copied completely? Whenever I resort to the "copy the BIN file", I ensure the file copied is complete by verifying the MD5 hash value against the MD5 hash value found in the Cisco website. Trust me, adding this additional "layer" of security saved me doing ROMmon upgrade so many times.

Trackpad preferences does not appear in the system preferences

Hi.
My Macbook Pro has Snow Leopard version os x 10.6.8.
For any reason that I do not know, I am unable to use all the functionalities of the trackpad like rotate a picture etc.
Besides that, if I go to the System Preferences Folder, and select the Trackpad preferences pane, I find a clear window... all the options about trackpad functionalities disappeared and I do not know how to restore it.
Besides that, now my trackpad does not appear to have all functionalities operational. For example, in order to open a file, now I have to press twice the trackpad. Before, it only was necessary to tap twice the trackpad, without pressure on it.
Does anyone knows how to solve this?
Thank you in advance,
PA Sousa

Hi yong88
Try to reset PRAM and PMU.
Try to boot from installer disk and press D for hardware diagnostic.
Try to repair permission.
Go to system preference > International > Input menu > check only UK.
Install a fresh OS X might resolve the problem (back up your file first).
Check the connection from logic board to the keyboard and re-attached that and see how it works.
Good Luck

I am using 10.6.8 and I cannot get an Imac to appear in workgroup manager, the mac is bound to both AD and OD. I have removed the bindings, rebuilt the mac and also removed it from bot system but still it does not appear in OD in work group manager.

I have a mac which is connected to a network and is bound to both OD and AD with no issues on my server when I try to manage it through Workgroup manager it does not appear.
I have unbound it , removed it from both systems completely and even rebuilt it but it still does not appear in WGM.

If your server is 10.6 and your client is 10.7 you'll have to add it manually to WGM
via mac address. 10.7 clients don"t automatically appear in 10.6 server wgm

Visual Composer 7.0: system (data source) does not appear

Hi...
There is a problem: system (data source) does not appear in Visual Composer 7.0
1. There is a connector MDM. It is made by PCD. It has been tested. The test is ok.
2. However, as the data source in Visual Composer a connector MDM does not appear.
3. This problem affects all types of connectors, but the Web Service Connector. Connector Web Service is always there.
What the .....?
P.S. The role of the creator of the connector is the same user of Visual Composer
Thanks...

Hi...
There is a problem: system (data source) does not appear in Visual Composer 7.0
1. There is a connector MDM. It is made by PCD. It has been tested. The test is ok.
2. However, as the data source in Visual Composer a connector MDM does not appear.
3. This problem affects all types of connectors, but the Web Service Connector. Connector Web Service is always there.
What the .....?
P.S. The role of the creator of the connector is the same user of Visual Composer
Thanks...

PXI System does not appear in MAX 4.0

Hello,
My system comprises LabVIEW RT 7.0, target PXI-8176 controller in PXI-1000B chassis, PXI-6608, PXI-6711, NI-4472, PXI-6704, PXI-6527, PXI-8423/4, PXI-8422/4. This has been stable for two years. I recently solved an RS-485 2-wire mode configuration problem, using information in a discussion forum thread, by upgrading to NI-VISA 3.4.1 and NI-Serial 2.5.5. MAX 4.0 was installed as part of this process. Everything seemed to work fine. I instructed a distant customer to do the same, but they experienced some difficulty. To ensure we were working from the same starting point, I re-initialized my PXI system, using PXI Format Hard Drive Disk, version 7.0, from MAX 4.0. I configured TCP IP address, and re-installed the RT software on the PXI controller.
Next, I attempted to configure the PXI controller and chassis, in MAX, to update the pxisys.ini file, but the PXI System (Unidentified) does not appear under Remote System>>IP address>>Devices and Interfaces. Similarly for the serial ports. This worked before, but I cannot get this back. What is wrong?
Best regards,
RonC

Hello S. Bassett
The controller is definitely booting in RT mode -- I can still run my applications on the RT target. VISA seems configured properly also, I can make VISA calls without error in the application.
In fact, the RT system seems to work correctly, and I contemplated leaving it as it is. However, the fact that MAX does not recognize the PXI system makes me nervous, and I cannot do some of the things I may want to do, for example independently configure RS-485 port wire mode in MAX (the ports do not show up either). Traditional DAQ configuration in MAX works.
After your last post, I found a brief reference in MAX Help that indicated "PXI Services" had to be downloaded before the chassis could be configured. But there are no other mentions of what PXI Services is, what it does, or how to install them. PXI Services does not show up as RT Software in MAX. In the Windows Add/Remove Programs control panel in Windows, in the National Instruments software section, there are two apparently related entries:
- NI PXI Platform Services for LabVIEW Real-Time 1.5.1
- NI PXI Platform Services for Windows 1.5.1
But, I cannot get these to install on the RT target. Not knowing what was causing the problem, I uninstalled everything from National Instruments, deleted all folders, and reformatted the PXI platform. There was one problem during this process -- after uninstalling NI-Serial 2.5.5, it does not get removed from the Add/Remove programs control panel. There is still a registry key that the uninstaller did not remove -- presumably this is the problem.
I have rebuilt everything, but could not get NI-Serial to install -- the installer thinks there is a newer installed on the RT target (there isn't) and refuses to install NI-Serial 2.5.5. So right now, I cannot install NI-SERIAL (any version), or remove the 'existing' NI_SERIAL, because it isn't actually there, and there is no uninstaller.
Otherwise, everything seems to be back to where it was before I "upgraded" to NI-VISA 3.4.1. This was NI-VISA 3.0, LV RT 7.0, and MAX 3.0.2. I have not yet been able to install NI-Serial, so I cannot yet see if I have also restored my original problem -- the one that led me to have to upgrade NI-VISA and NI-SERIAL in the first place.
Most importantly, there is now a "PXI Services v1.1.2" installed on the RT target. I am quite sure the problem with MAX 4.0 not recognizing my PXI system has to do with the absence of this driver on the RT target.
Thanks again for your interest and help,
RonC

System Administration Operations Scheduled Backups does not appear in ACS 5.0.0.21

Similar Messages

Maybe you are looking for