"system-administration" programs blocked?

Hi.
I have arch with gnome.
Have a problem with system->administration programs.(network,services,shared folders.....etc)
When i try to run any program inside it i got:
The configuration could not be loaded
You are not allowed to access the system configuration.
I think it should ask me for admin password but it doesn't.
Any one knows how to fix it?
Thanks.

B-Con, thanks.
Afer installing it i have system tools but have
the first problem:
The configuration could not be loaded
You are not allowed to access the system configuration.
a
gksu users-admin
"(users-admin:7560): Liboobs-WARNING **: There was an unknown error communicating with the backends: Message did not receive a reply (timeout by message bus)"
- and the program did opens, but empty!
gksu "services-admin" - program of services opening but it have nothing inside.
Only empty window.
Another thing. I tried to put link to "UsersandGroups" to desktop and "run as administrator" and
got Bug reporting tool. So or it give me a bug or it opens with gksu and it empty
Last edited by din_vl (2008-02-09 08:40:32)

Similar Messages

System administrator has blocked this program

Hi, i have this error, how can i "allow" this program? i have admin rights.

Hi,
Did you disable the UAC firstly?
Users who log on with an administrator account may still experience UAC prompts, if Admin Approval Mode is configured in Group Policy. Admin Approval Mode helps prevent malicious software from silently installing itself without an administrator's knowledge.
It also helps protect from inadvertent system-wide changes. Lastly, it can be used to enforce a higher level of compliance where administrators must actively consent or provide credentials for each administrative process.
Regards.
Vivian Wang

This program has been blocked for your protection/ An Administrator has blocked you from running this program/ Return code: 1625

This program has been blocked for your protection/ An Administrator has blocked you from running this program/ Return code: 1625
If you get a message saying, “Publisher: Not trusted,” the printing functionality you are attempting to use may become blocked while downloading, installing or attempting to run.
You may also see messages such as:
MSIExec installation error (Return code:1625)
The recommended software listed below could not be installed
“Do you want to allow the following the program from an unknown publisher to make changes to this program”
“This program has been blocked for your protection”
“Blocked”
“Not trusted”
The Windows User Account Control message may look like this.
You may get this message when installing, uninstalling, or updating HP software for Windows from the product CD, from software previously downloaded from www.hp.com, or from running HP Smart Install by connecting a printer via USB cable.
The solution will vary depending on the products that you are using. Here is a helpful document for HP printers that will walk you through what you can do.
John
I work on behalf of HP.

Hey @kat54 ,
Welcome to the HP Forums!
I understand you're receiving an error stating "This program has been blocked for your protection."
You can read about this error here: "Blocked", "User Account Control", "Not trusted", or "Return code: 1625" message in Windows.
You will find a link for Printers here which directs you to the HP Update Software Utility to resolve the problem. When you install this utility ensure you select version 5.005.002.002 or later.
Make sure the utility you've downloaded is for your exact product and operating system.
If this does not resolve the issue please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the following link to get the support number for your region: Phone Assist Worldwide.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

Warning: An error occurred during tax calculation. Please correct the problem or contact your system administrator.

Hi All
We are creating POs from interface program "Import Standard Purchase Order Program". Only for few of the POs, we are encountering the error 'Warning: An error occurred during tax calculation
. Please correct the problem or contact your system administrator.'
This error is happening for few PO's, other POs with same vendor, ship to and bill to location created successfully by the program
Any inputs on how to resolve this error is greatly appreciated.
Regards,
Brajesh

Hi Hussein,
Thank for the prompt response.
We have already applied the patch related to doc 1272684.1.
Below are the environment detail.
Database: Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
Application : 12.1.3
Diagnostic tool output :-
INTERFACE_
TRANSACTION_ID
INTERFACE_TYPE
COLUMN_NAME
PROCESSING_DATE
TABLE_NAME
ERROR_MESSAGE_NAME
ERROR_MESSAGE
100148
PO_DOCS_OPEN_INTERFACE
09-Aug-2013
PO_HEADERS_INTERFACE
PO_PDOI_TAX_CALCULATION_ERR
Warning: An error occurred during tax calculation. Please correct the problem or contact your system administrator.
Log file :-
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POXPOPDOI module: Import Standard Purchase Orders
+---------------------------------------------------------------------------+
Current system time is 09-AUG-2013 21:09:04
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
STANDARD
N
INCOMPLETE
12805
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
To get the log messages for PDOI, please use the following id to query against FND_LOG_MESSAGES table:
AUDSID = 12076063
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
69
+------------- 1) PRINT   -------------+
Printing output file.
               Request ID : 55116524
         Number of copies : 0
                  Printer : noprint
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed successfully
Current system time is 09-AUG-2013 22:27:42
+---------------------------------------------------------------------------+
Brajesh

I get a message popup saying unable to update because I do not have system permissions required when trying to go to 3.6.13 on my IMac,but I am the system administrator.

I tried updating from 3.6.12 to 3.6.13 on my IMac and get a pop up window that says Unable to update because I do not have system permissions required to update. If I download the latest version and try to replace the existing version it says "The operation can’t be completed because you don’t have permission to access some of the items." I called Apple and made sure I was the system administrator and I am. I made sure that the two other users did not have FireFox open and it still fails the same way.
Note: This problem resolved itself for some reason but I still want to thank everyone for their suggestions.

* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Programs Blocked by Group Policy - But Why?

Hi, I'm hoping someone can help with this... I'm an IT technician and one of my clients has suddenly experienced an issue whereby they can no longer execute two programs without right clicking and selecting "Run As Administrator". This happened
"out of the blue" and without any warning or trigger event. The user has been running this same configuration for months before this issue started happening. The only possible event was the user reported possibly running some sort of malware from
an email attachment they thought was safe but later determined it came from an unknown source. HOWEVER, all current virus and malware scans come up clean.
If they just click the icon and do a normal execute they receive the message "Program blocked by Group Policy". They are on a domain, however, there have been NO changes to any of the group policies AND no other users are experiencing the issue
despite the fact all the users are contained in the same security group on the domain controller.
The two programs this user can no longer execute, without elevation, are: AVG Antivirus Business edition and Symantec PC Anywhere.
I've been all over google and made some recommended changes via gpedit.msc but nothing has helped so far. I also did a gpupdate and tried turning UAC on and off but the behaivor is the same regardless of the state of UAC.
Anyone have any suggestions? Thanks much,
--Rick

The mailware may have put in a registry entry under policies that is
causing yuor behaviour.
As a last resort you could try this:
Logon as an Administrator
Navigate to HKLM\Software\Policies and nose around to see if anything
there might be the cause.
Next, Navigate to
HKLM\Software\Microsoft\Windows\CurrentVersion\Policies and do the
same.
If nothing jumps out at you, back up both of these registry keys then delete them and then
run GPUPDATE /FORCE and see if problem is still there.
If so, try all the above steps again, but this time use HKCU instead
of HKLM.
Rick G.1 wrote:
>
>
>Hi, I'm hoping someone can help with this... I'm an IT technician and one of my clients has suddenly experienced an issue whereby they can no longer execute two programs without right clicking and selecting "Run As Administrator". This happened
"out of the blue" and without any warning or trigger event. The user has been running this same configuration for months before this issue started happening. The only possible event was the user reported possibly running some sort of malware from
an email attachment they thought was safe but later determined it came from an unknown source. HOWEVER, all current virus and malware scans come up clean.
>
>If they just click the icon and do a normal execute they receive the message "Program blocked by Group Policy". They are on a domain, however, there have been NO changes to any of the group policies AND no other users are experiencing the
issue despite the fact all the users are contained in the same security group on the domain controller.
>
>The two programs this user can no longer execute, without elevation, are: AVG Antivirus Business edition and Symantec PC Anywhere.
>
>I've been all over google and made some recommended changes via gpedit.msc but nothing has helped so far. I also did a gpupdate and tried turning UAC on and off but the behaivor is the same regardless of the state of UAC.
>
>Anyone have any suggestions? Thanks much,
>
>--Rick
>
>
>
Ha®®y

No data found for contact person '2000000243'. Inform system administration

Hi expert,
i found error 'No data found for contact person '2000000243'. Inform system administration'.
When check in program: HRALXSYNC, no error found.
Thanks and Regards,
Fariz

Hi,
You have to maintain contact person for the supplier, as an SRM admin the list of suppliers dispalyed select the vendor against which you want to create the contact and click on "Create Contact Person with reference" maintian all the required entires and you will be able to see this contact details in you RFx while selecting the bidders for RFx.
with regards
Manjunath

Azure Antimalware (Endpoint Protection) says "your system administrator has restricted access to this app"

I see many posts about using SCCM to configure policies, etc., etc. However, I can't find any information about my specific issue:
I have installed the Antimalware extension on several Azure VMs. Only one VM allows access to "System Center Endpoint Protection". All the other ones say "your system administrator has restricted access to this app". Now, since I am the
system administrator, I am at a loss how to be able to see / configure the other VMs using this program.
I have not installed SCCM, since I didn't think I would need it. If, in fact, I must install SCCM, it pretty much defeats the purpose of an extension.
Any ideas would be greatly appreciated.
--- If I am in the wrong forum, please let me know where I should post my question, since there don't appear to be any forums discussing extensions for Azure.

Although azure endpoint protection is the same core technology as SCEP it is not managed in the same way. Also, if the ConfigMgr agent is not installed on these VMs, then it's quite impossible for ConfigMgr to the source of the issue here. You are better
off posting to an Azure forum.
However, did you elevate when launching the EP console?
Jason | http://blog.configmgrftw.com | @jasonsandys

Your system administrator has restricted access to this app.

Enabled the Endpoint role on primary site server.
Enabled Endpoint protection in Default Client Settings
We have Default Client Antimalware Policy set.
When I click on System Center EndPoint Protection in All Programs I get following error:
Your system administrator has restricted access to this app.

I am getting this on several windows client builds with SCEP now, we don't have an Applocker policy at all, one of the computers in question is running Win 7 Pro!
I cant see how it could be malware as the users are standard users.
I also don't know how long its been like this, but a machine we just re-imaged last week is now doing it.
going to re-image and see if an update is causing it.

I can not open Firefox. Keep getting the error message "Failed to read the configuration file. Please contact your system administrator." What do I do?

I can not open Firefox. I keep getting the message "Failed to read the configuration file. Please contact your system administrator." I have tried uninstalling Firefox and then reinstalling it but without success. What should I do?

Which Fx version? When you uninstalled Fx, did you reboot computer before reinstall?
Also, check for / delete any leftover files in the Fx programs install folders, before reinstall?
Is your profile in the default location or custom location?
Have you tried creating a new, completely clean profile - to test (then make sure to select that profile to start Fx - from the Profile Manager)? (no addons or plugins installed).
Does the user acct (that Fx fails under) have access ("rights") to all locations - especially for Fx profiles location?

However, we've had issues with other legacy systems and programs for outlook

I have a user who when she logs into her workstation and tries to access her outlook folders she is denied access. If she removes and then adds them back they work. Only one other person on our network had this problem which I initially thought was connectivity
related. I replaced their cat five cable and that seemed to solve their problem. I tried this with this user and it cleared up for about a week but happened again today. Any thoughts or experience with this. Outlook doesnt support archives in a network share
so I cant turn to them. It uses a login batch script to load mapped drives according to department. This all predates me so I did not build them. However, we've had issues with other legacy systems and programs so it is highly possible that this could be an
issue.

Will:Hi! Hi!
I use Firefox and it is now No. 1 on my choice of browsers. I agree it doesn't like the "for IE only" coded sites but then IE is now a non issue as it is dead in the water! So Safari is now really bloated and getting slower by the version. Firefox is quick, good to look at with numerous skins, and what is more has become the browser of choice for web developers on both platforms because it sticks to the WWC3 code. Camino is just another flavour of Netscape which seems to be a bloat AOL IE wannabee product. Do yourself a favour and download Firefox. Give it a few spins around the block and I'm sure you will agree. As for the sites it declines to accept because of bad code, then I would suggest a strong letter of protest to the webmaster! For too long IE has been flouting the rules and trying to be the only game in town. Take some affirmative action and let the webmasters know there are other browsers available to users. If you are still not a believer then check this out:
http://www.pcworld.com/reviews/article/0,aid,118959,00.asp
May the force be with you!

Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator

Dear Techies,
We have registered an Extra Information Type as self service OAF page and did some validations using user hook which are working fine. But for some requests EIT creation page is throwing below errors.
1. Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
2. An unexpected situation occurred while executing routine FND_DATA_SECURITY.GET_SECURITY_PREDICATE_HELPER.The cause was: The parameter 'p_object_name' cannot be 'GLOBAL'.
System throws these errors whenever user hook suppose to throw our customized validation messages.Since we are at UAT instance, we are bouncing apache and oacore to get rid of these errors every time they appear. But we cannot bounce once it is moved to production.
Kindly share some ideas to fix these errors as we are very close to Go-Live and we are facing this issue with all EIT's and SIT's.
Thanks and Regards
Dileep Kumar.

Hi Mahesh,
Thanks for reply.
I have gone through the link that you have suggested. But our EIT user hook validations doesn't have any code related to submission of concurrent programs. More over our error is not stable. If we bounce the apache and oacore, the system will work fine without unexpected errors for some time. We are not even able to replicate these errors.
Thanks and Regards
Dileep Kumar.

CKPT locks the system objects and blocks other sessions

CKPT locks the system objects and blocks other sessions
Oracle Version 10.2.0.4
OS : HP UX 11.31 Itanium
SQL> select * from v$lock where block=1;
ADDR KADDR SID TY ID1 ID2 LMODE
REQUEST CTIME BLOCK
C0000009FCC2B348 C0000009FCC2B368 1100 RO 65559 1 2
0 3877 1
SQL> select program from v$session where sid=1100;
PROGRAM
oracle@ctqanhr1 (CKPT)
As a workaround we flush the buffer cache with the below command
SQL> alter system flush buffer_cache;
however the issue reoccurs after some times.
Edited by: 965132 on Dec 2, 2012 9:59 PM

other reference:
CKPT Questions
The temporary workaround is to set "_db_fast_obj_truncate"=FALSE in that particular case.
Regards,
sgc
Edited by: Samuel G. Cristobal on 03-dic-2012 8:48

Officejet 8600 locked by system administrator

Hello, I am trying to set up my wireless 8600 on my network, but find that even the factory defaults were locked by the system administrator. The administrator is my ex... Can someone tell me how to unlock it so I can use the wizard to get it on my network? Thank you!

Hello pedalva,
Welcome to the HP Support Forums!
I understand that you are looking to remove the admin blocks on your Officejet Pro 8600, I would like to see if I can help. Please check your PM's here on the Forums.
If you are not sure how to check them, it's the envelope icon to the right of Log Out.
Cheers,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

"system-administration" programs blocked?

Similar Messages

Maybe you are looking for