System Administrator Responsibilty Gone???

Hi Hussein,
OS= AIX 5L
EBS 11i (11.5.10.2)
I have just finished installing our new Fresh Install EBS 11i for new setup. Then I turned it over to the Functional
Analysts for them to start the Apps Setup. But suddenly they called me informing the "System Administrator Responsibility" was gone. I checked it then, and true enough it can not be found in any of the login userids and in any responsibility, even in the SYSADMIN userid. But it was existing before. I dont know what have they done.
What could have gone wrong? huhhuhu :( please help.
Is it possible to delete the System Administrator Responsibility?
Thanks

Hussein,
Is this correct substitution parameter? APPS & SYSTEM_ADMINISTRATOR?
update wf_user_role_assignments
set user_end_date=null,
role_end_date=null,
assigning_Role_end_Date=null,
effective_end_Date=to_date('31-12-4712','dd-mm-yyyy')
where user_name='APPS';
update wf_user_role_assignments
set user_end_date=null,
role_end_date=null,
assigning_role_end_Date=null,
effective_end_Date=to_date('31-12-4712','dd-mm-yyyy')
where role_name='SYSTEM_ADMINISTRATOR';
update wf_local_user_Roles
set user_end_date=null,
role_end_date=null,
effective_end_Date=to_date('31-12-4712','dd-mm-yyyy')
where user_name='APPS';
update wf_local_user_Roles
set user_end_date=null,
role_end_date=null,
effective_end_Date=to_date('31-12-4712','dd-mm-yyyy')
where role_name='SYSTEM_ADMINISTRATOR';
tHANKS

Similar Messages

  • SYSTEM ADMINISTRATOR RESPONSIBILTY ISSUE

    Hi,
    PROD
    R12
    AIX 5.2
    The management wants to create a user and assign “SYSTEM RESPONSIBILTY” as below requirement.
    Responsibility                               Justification / Reason
    System Administration                              View ONLY Key Flex field setup
                                                            View ONLY   Descript FF setup
                                                            View ONLY   List of values
                                                            View ONLY   Concurrent Requests
                                                            View ONLY   Profile Options
                                                            View ONLY   Responsibility & Users
    ACCL Saudi HRMS Super User            View ONLY Current Setup Screens Is it possible to create RO responsibility or in other way??
    Thanks
    Edited by: user11969485 on Jun 22, 2011 3:09 AM

    But where can I collect all functions what I know there is a way that is go to menu of system administrator responsibility and perform for all functions with parameters “QUERY_ONLY=YES".” But this is very time taking process; do you have some other way where can I make it fast?No -- However, you could use FNDLOAD to download the menu with all the forms/functions, edit the ldt file and add "QUERY_ONLY=YES" parameter and upload it to a new menu. I have not tried this before myself and it would take the same time as the above but it is an alternative.
    Thanks,
    Hussein

  • System Administrator responsibility not working in E-business suite

    Hi,
    Im new to Oracle Apps. In my company none of the funcion prompts(like custom, requests, set, conflict domains) under system administrator responsibilty in the ebusiness suite are working..If i click on any prompt the browser gives a popup saying
    "Additional plugins are required to display media on this page...Install missing plugins"
    Im using Mozilla browser in windows..
    Not able to analyze what plugins are needed..
    I need your suggestions
    Please reply

    Dint expect such a quick reply..
    I will install jinit on my system & will be aware of what i do when i login as sysadmin..
    Thankyou Kevin & Fadi..
    Looking forward to more of ur replies to my doubts..
    Bipin

  • Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator

    Dear Techies,
    We have registered an Extra Information Type as self service OAF page and did some validations using user hook which are working fine. But for some requests EIT creation page is throwing below errors.
    1. Encountered an error while getting the ORACLE user account for your concurrent request. Contact your system administrator.
    2. An unexpected situation occurred while executing routine FND_DATA_SECURITY.GET_SECURITY_PREDICATE_HELPER.The cause was: The parameter 'p_object_name' cannot be 'GLOBAL'.
    System throws these errors whenever user hook suppose to throw our customized validation messages.Since we are at UAT instance, we are bouncing apache and oacore to get rid of these errors every time they appear. But we cannot bounce once it is moved to production.
    Kindly share some ideas  to fix these errors as we are very close to Go-Live and we are facing this issue with all EIT's and SIT's.
    Thanks and Regards
    Dileep Kumar.

    Hi Mahesh,
    Thanks for reply.
    I have gone through the link that you have suggested. But our EIT user hook validations doesn't  have any code related to submission of concurrent programs. More over our error is not stable. If we bounce the apache and oacore, the system will work fine without unexpected errors for some time. We are not even able to replicate these errors.
    Thanks and Regards
    Dileep Kumar.

  • System Administrator

    Hi,
    Please can you suggest some books,which are usefull for system administratir responsibilty.
    which must cover following activities:
    creation of Users,submitting Request,Definig Request Sets,Managing Concurrent Managers etc
    Regards,
    purushotham rao.

    Check Oracle Applications System Administrator's Documentation Set available at:
    http://download-uk.oracle.com/docs/cd/B25516_16/current/html/docset.html
    Oracle Applications System Administrator's Guide - Security - B13923-04
    Oracle Applications System Administrator's Guide - Maintenance - B13924-04
    Oracle Applications System Administrator's Guide - Configuration (zipped) - B13925-06

  • System Administrator Responsibility

    Hi hussein/helios,
    As an Apps Dba, I guess the most used responsibilty you choose in Oracle Apps is System Administrator.
    What other responsibility does an Apps DBA be of interest in, aside from it?
    Thanks a lot
    MsK

    Hi Msk;
    As an Apps Dba, I guess the most used responsibilty you choose in Oracle Apps is System Administrator.
    What other responsibility does an Apps DBA be of interest in, aside from it?As you mention in my company we use mostly System Administrator but many times in day we are using System Administration or some others too. It depends what you get request from client side(problem,request etc) so you can choose reponsibility via this request.For instance you can choose Workflow if you are doing something related wiht it.
    By the way i suggest check Hussein Sawwan greatest post about similar topic:
    apps dba utilities
    apps dba utilities
    DBA and APPS DBA Activities
    Re: DBA and APPS DBA Activities
    oracle apps dba documentations
    oracle apps dba documentations
    Hope it helps
    Regard
    Helios

  • Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

    I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
    Excel Web Access
    An error has occurred.
    Please contact your system administrator if this problem persists.
    Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
    1. The 12/logs file is as bellows:
    10/10/2014 09:53:55.18  w3wp.exe (0x6528)                        0x5C08 Excel Services               
     Excel Calculation Services     2u7d Medium   ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
    not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local(). 
    10/10/2014 09:53:55.18  w3wp.exe (0x6528)                        0x5C08 Excel Services               
     Excel Services Administration  8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
    either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.. 
    10/10/2014 09:53:55.18  w3wp.exe (0x6528)                        0x5C08 Excel Services               
     Excel Web Access               6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
    An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
    outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()    
    at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office... 
    2.the event in event viewer is:
    Log Name:      Security
    Source:        Microsoft-Windows-Security-Auditing
    Date:          2014/10/10 9:49:43
    Event ID:      4625
    Task Category: Logon
    Level:         Information
    Keywords:      Audit Failure
    User:          N/A
    Computer:      ***.net
    Description:
    An account failed to log on.
    Subject:
     Security ID:  NULL SID
     Account Name:  -
     Account Domain:  -
     Logon ID:  0x0
    Logon Type:   3
    Account For Which Logon Failed:
     Security ID:  NULL SID
     Account Name:  ***
     Account Domain:  ***
    Failure Information:
     Failure Reason:  An Error occured during Logon.
     Status:   0xc000006d
     Sub Status:  0x0
    Process Information:
     Caller Process ID: 0x0
     Caller Process Name: -
    Network Information:
     Workstation Name: ***
     Source Network Address: ***
     Source Port:  63664
    Detailed Authentication Information:
     Logon Process:  
     Authentication Package: NTLM
     Transited Services: -
     Package Name (NTLM only): -
     Key Length:  0
    This event is generated when a logon request fails. It is generated on the computer where access was attempted.
    The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
    The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
    The Process Information fields indicate which account and process on the system requested the logon.
    The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
    The authentication information fields provide detailed information about this specific logon request.
     - Transited services indicate which intermediate services have participated in this logon request.
     - Package name indicates which sub-protocol was used among the NTLM protocols.
     - Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
    Event Xml:
    <Event xmlns="">
      <System>
        <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
        <EventID>4625</EventID>
        <Version>0</Version>
        <Level>0</Level>
        <Task>12544</Task>
        <Opcode>0</Opcode>
        <Keywords>0x8010000000000000</Keywords>
        <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
        <EventRecordID>37602685</EventRecordID>
        <Correlation />
        <Execution ProcessID="532" ThreadID="26096" />
        <Channel>Security</Channel>
        <Computer>***.net</Computer>
        <Security />
      </System>
      <EventData>
        <Data Name="SubjectUserSid">S-1-0-0</Data>
        <Data Name="SubjectUserName">-</Data>
        <Data Name="SubjectDomainName">-</Data>
        <Data Name="SubjectLogonId">0x0</Data>
        <Data Name="TargetUserSid">S-1-0-0</Data>
        <Data Name="TargetUserName">***</Data>
        <Data Name="TargetDomainName">***</Data>
        <Data Name="Status">0xc000006d</Data>
        <Data Name="FailureReason">%%2304</Data>
        <Data Name="SubStatus">0x0</Data>
        <Data Name="LogonType">3</Data>
        <Data Name="LogonProcessName">
        </Data>
        <Data Name="AuthenticationPackageName">NTLM</Data>
        <Data Name="WorkstationName">***</Data>
        <Data Name="TransmittedServices">-</Data>
        <Data Name="LmPackageName">-</Data>
        <Data Name="KeyLength">0</Data>
        <Data Name="ProcessId">0x0</Data>
        <Data Name="ProcessName">-</Data>
        <Data Name="IpAddress">***</Data>
        <Data Name="IpPort">63664</Data>
      </EventData>
    </Event>

    Hi Tracy,
    Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
    This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
    zone for your web application, and also add these URLs as trusted locations, then check results again.
    If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur. 
    https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
    http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
    Thanks
    Daniel Yang
    TechNet Community Support

  • Getting error while opening a saved for later notification: The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action.

    Hi All,
    While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
    This is a custom notification.
    Please help.
    Thanks
    Raghava

    HI All,
    Please help on this issue.
    Thanks
    Raghava

  • I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit).  It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation."  I am the sole user- please help.

    I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit).  It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

    This is a Microsoft Windows Issue.
    From a MS Support Engineer:
    "Hi,
    ·        Is the computer on a domain?
    ·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
    Try the steps below and check if it helps.
    Step 1:
    Run the software setup file as an administrator and check if it helps.
    a. Right click on the setup file of the software that you are trying to install.
    b. Select “Run as administrator”.
    Step 2:
    Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
    Disable antivirus software
    Warning:
    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
    Step 3:
    a. Click Start, type "Local Security Policy" (without quotes) and press enter.
    b. Click on Software Restriction Policies.
    c. In the right pane, double click on the "enforcement".
    d. Select “All users except local administrators”.
    e. Click Ok and restart the computer and check if the issue is fixed."

  • Can't Open Server Manager - don't have System Administrator Rights

    Hi,
    I am new to BPC
    After i updated the support patch to BPC 7.5 MS  SP3 ,  pack level 2
    and Restart the server
    Then Server Manager can't open again.
    Error Message :
    This ID (xxxxxx)  don't have System Administrator Rights; you must log on with a user ID that has system administrator  privileges
    But I have logon the user which is used to install BPC 
    I have try to restart the service, but it is not working .
    Any method reset it ?  or solve it?
    thx
    John

    Dear Kong Chong Shun,
    From your information, I'm sorry I could not get several information. Did you upgrade your BPC Clients too, lets say BPC Administrators ?.
    Kind Regards,
    Wandi Sutandi

  • Unable to Log in. Please see your System Administrator. Laptop chucks Spack

    Hi all,
    Got great responses from people in my first post recently, but before I managed to try any of them, my laptop chucked a spack attack.
    It will start up, and get to the Log in Window, but when I type in my password (yes, it is the right one...) I get a message which says something like, 'There is a Problem logging in. Please see your System Administrator'. I can't remember the exact wording, but it is pretty much that.
    Unfortunately, I am the System Administrator, and I'm using the only log in and password attached to the computer. So I've got no idea how to get into it. A friend suggested I start it up in target disk mode from another computer, but I've got Filevault turned on, so I suspect I'm going to have the same problem.
    Recently installed an Apple security Update, but thats the only thing that has changed.
    Any suggestions very welcome, as it has been about five days now.
    Thanks,
    Jonathan

    Hi Jonathan!
    Have you tried resetting the Admin PW?
    To reset the administrator password using the Mac OS X CD:
    1. Insert the Mac OS X Install Disc 1 CD and restart the computer.
    2. When you hear the startup tone, hold down the C key until you see the spinning gear.
    3. When the Installer appears, choose Installer > Reset Password.
    4. Follow the onscreen instructions to change the password.
    5. Quit the Installer and restart your computer while holding down the mouse button to eject the CD.
    Copied From Changing your administrator password
    Good Luck!
    ali b

  • Business rule in MDS 2012 error: A database error has occurred. Contact your system administrator.

    I get the following information in my MDS log as well as the above error message when I execute a business rule that has a condition of AND and an Action of Attribute must be unique in combination with 2 other attributes. 
    I'm running SQL Server 2012 11.0.3000
    MDS database version 11.1.0.0
    Any ideas?
    MDS Error: 0 : SqlException message: A database error has occurred. Contact your system administrator.
       at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.HandleExceptions(Exception ex)
       at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteDataSet(String spName, CloseConnectionBehavior closeBehavior, Object[] parameterValues)
       at Microsoft.MasterDataServices.Core.DataAccess.MasterDataAccess.<>c__DisplayClass5.<ValidateEntityMembers>b__4()
       at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteMethodWithDeadlockProtection(MethodDelegate method)
       at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.ValidateMembers(Int32 versionId, Identifier entityIdentifier, IList`1 memberIds, RequestContext context, OperationResult results)
       at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.Process(ValidationProcessCriteria criteria, Boolean commitVersion, Boolean validateEntityAsync, Boolean returnValidationResults, RequestContext context, OperationResult results)
    SQL Error Debug Info: Number: 208, Message: Invalid object name 'cteDuplicates0a070e37b106b9e3efe35a455076efa7'., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
    SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
    SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: , Line: 0
    SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpBusinessRule_AttributeMemberController, Line: 0
    SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpValidateMembers, Line: 0
        DateTime=2013-08-15T13:25:15.6684023Z
    MDS Error: 0 : <ArrayOfError xmlns="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
      <Error>
        <Code>208</Code>
        <Context i:nil="true" />
        <Description>A database error has occurred. Contact your system administrator.</Description>
      </Error>
    </ArrayOfError>
        DateTime=2013-08-15T13:25:15.7152026Z

    OK I bit the bullet and contacted support on this one.
    There is a known issue with MDS 2012 and business rules with a combination of "must be unique" attributes. If you do not list the attributes in the same order that they were created you will get the generic error I cited. At first they told me it must be
    in the same order the attributes are in and that worked on one entity but not the other. The difference was that in the second entity I previously rearranged the attributes in question. Once I changed the order in the business rule to reflect the *original*
    order it worked like a champ.
    Hopefully this helps save someone some time and money.

  • I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don'

    I am using a work laptop and have the same problem. When I try to change the "configure proxy", they only available option is "use this proxy server for all protocols". Could it be that my system administrator blocked me from changing it since they don't want us to use Firefox.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; GTB6.4; FNGP_SYS)

    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")

  • Cannot delete login item "You cannot change this item because it's managed by your system administrator"

    We migrated a server (ldap and file serving) to some new machines, which have new names.  We've got all of the login and file sharing functionality working on the new machines, but wherever we have a mount of a share in the Login Items for a user, we can't get the old machine out of the Login Items.  It's not fatal, but it does make login take a lot longer because it has to fail first.
    We can mount the share from the new server, and save THAT in a NEW Login Item just fine -- it's just that when you click on the old defunct one the minus sign is greyed out, and the mouseover says "You cannot change this item because it's managed by your system administrator."  There is a yellow triangle next to the item in the list.  Went into the user's ~/Library/Preferences/com.apple.loginitems.plist and it's not in the file.  The /Library/Preferences don't have anything that looks like a plist of the right name.
    Where do I find it and how do I get rid of it?

    In response to ManishBhatt94's post today, I may have some information that may be useful to you. I called Microsoft's 800-642-7676 and spoke with a technical representative with questions pertaining to my particular issue. I also have friend that has the
    same issue with her computer running windows 8. A representative from my ISP told me how to go into 1)Tools, 2)Internet Options, 3)Connections, 4)LAN settings and uncheck the proxy settings box. However after restarting or shutting down my computer it reappears.
    It will also reappears while I play games on Facebook not allowing me continue until I go back into the proxy settings in LAN and uncheck the box AGAIN and AGAIN. A local owner of a computer repair shop told my friend that it was a virus. After speaking with
    Microsoft today I was told the same thing/it was more than likely a virus on my personal PC at home. As most people likely do,  I use wireless internet in my home on the affected computer. Solution; as suggested by Microsoft rep was to have the virus
    professionally removed either by someone or to use their remote service for a fee of $149 which comes with several guarantees and does not require you to re-install software or documents. I hope that my response was of some help to you. I also kept trying
    to fix this problem but wasted a lot of time. He also suggested to Google the proxy problem to see if ANYONE has any alternatives to fixing this problem!
     

  • How to reverse menu or function exclusions for a system defined responsibility like System Administrator??

    Hi Experts,
    One of our students have excluded the responsibility define function and user define function from the "System Administrator" responsibility in our test instance, which resulted in disabling of responsibility creation and user creation form.  Can anyone here explain how to resolve this issue??
    Thanks.

    Your DBA should be able to help you..........

Maybe you are looking for