System Alias Configuration in EP6

Dear All,
Can Any one tell me How To Configure the System Alias in Ep6 netweaver Component...
I have followed the steps given in Documnetation
first i created the system...
while creating the system it is asking system id system name..
i gave system id some thing like Test1 and System name as url of the my SAP server  which is some thing like /K/192.65.177.3/...../10.30.245.40/K/141.119.9.130
after creating system i created a system alias but whatever i created system alias should come under users manage ment section to configure the user id password after selecting the system as how it comes in ep5.. but it is not comming can any thing is miising or wrong in my system alias configuration....
can any one please help me in configuring the system alias
Thanks and Regards
Prasad.Y

Hi Prasad,
What User Mapping Type have you given?
You should give "Admin,User" for the system to come for user mapping.
Regards
Prakash
PS: Could you please not duplicate the posts.

Similar Messages

  • EP6 SP2 Jco / System Alias Question

    Hi all,
    I'm developing a number of Iviews on an EP6 SP2 system connected to a 4.6C box.  I have two problems that I'd be grateful for some help with.
    1) How do I make use of the System Aliases set up in the portal via Jco ?
    I know I can use the direct connection
    JCO.createClient("001", // SAP client
              "<userid>", // userid
              "****", // password
                 "EN", // language                               
                    "<hostname>", //      
              "00"); // system number
    but it would be much easier if I could use the configured System Alias called "UKSAP" which has been set-up in each Portal box.
    2) I believe that EP6 SP2 will not require connection pooling in the jco code. Is this correct ?
    Cheers
    Richard

    Hi,
    We are trying to do pretty much the same thing you are, I am trying to get my Java iview to use the System Alias to connect to an R/3 JCO destination.
    Could you elaborate on your findings in this regard. I am currently getting the following error : "Target for system alias SAP_R3_HumanResources not found in system landscape"
    I have entered the connection info for this target into the jcoDestinations.xml and I've created a system in the portal with the alias SAP_R3_HumanResources...
    Thanks in advance,
    Mukta Pathak

  • System Alias reappears in the System Configuration

    Hi All,
    This is a bit of a strange one but I wondered if anyone else has ever come across this with EP6 SP2.
    I have a System Object which I do not want to delete, since it might be required again in the future, so I am just removing the system alias to render it inactive.
    Overnight something causes the system alias to reappear and hence for the option in the user mapping drop-down to reappear too.
    I think my only option is to delete the system completely from the PCD.
    Any ideas?

    Thanks both for your advice.
    I have found out that this is in fact a "feature" in SP2 that if the alias is removed, but a user who has personalised this particular user mapping system logs onto the Portal afterwards, the alias is automatically recreated.
    Rgds,
    Marc
    Message was edited by: i022156

  • User roles property, when system alias is configured in universal worklist

    Hi,
    I am configuring system alias in Universal Worklist Configuration.  I have keyed in system alias and connector type and saved the system alias and its working fine.
    Apart from system alias and connector type, there are other properties like "User Roles, Delta Pull Channel Refresh Period(in seconds) and Delta Pull Channel Snapshot Refresh Period(in minutes). Can you any let me know what is the use of these properties.
    I heard that "Delta Pull Channel Refresh Period(in seconds)"  is the time period to refresh the UWL is it correct.
    Thanks & Regards,
    H.K.Hayath Basha.

    Try searching the http://help.sap.com  SAP NetWeaver pages for delta pull!

  • System and System Alias Creation

    Hi all,
    we have developed iViews in EP5. Now we want to migrate all our iViews to Ep6.. we have problem in EP6 for system and system alias creation..
    in EP5 we have 2 files called System.xml for defining the system and JCODestination.xml..
    after creating systems in System.xml.. we will define   all system properties in  like router string ,client no,and system number for each sap system in JCODestination.xml ..  
    and these systems we will map to the user in which will come all the defined Systems to combo box
    and we will define the systems in default.properties file and we will use in the par development...
    I heared that there are no System.xml and JCODestination.xml files in EP6 Netweaver Component....
    can you please any one advise me how to get configured System and System Alias in EP6 NetWever... and how to call in coding...
    I need a detailed steps how to create SAP System Alias.. since i am connecting to SAP System and Calling Function Modules and BAPIS From My Application(iViews).....
    I need a Detailed Explaination Step by Step Explanation ..
    your help will be required for me.. and appreciated to the great extent......
    Thanks and Regards
    Prasad.Y

    After following the steps above in system landscape
    please do the following to fill in the parameters
    Select connector under the property category.
    PlZ make sure that you have provided ApplicationHost(the host name of backend system), LogicalSystemName(can be found from transaction scc4,just dounle click on the client to see the logical name use saplogon and logon to the backend system R3 in this case) ,SAP Client(can be found from transaction code scc4), SAP SystenID,SAP System Number and Server port.
    After that create a System Alias for that system by selecting System Aliases under display.( This is important. I had the same kind of problem this should slove it).
    Now make sure that you have user mapping set for the backend R3 System(User Administration-->User Maping search for the user and choose edit. Then choose the system alias name form the drop down box and provide the login details for the backend system).
    Try to test the connection by selecting connection tests under display. If it doesnot work plz copy paste the whole error message.
    The message should look something like the one below
    Test Connection with Connector - Jan 1, 1970 2:35:42 PM
    Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this system object
    Results
    Retrieval of default alias successful
    Connection successful
    Let me know if you need any more details
    - Sheshu

  • Problem in creation of system alias for bw system

    Hi,
    I want to create system alias for the bw system
    system admin->sys Config->system landscape->portal content->my own folder
    for this folder i created the system object
    after creation of system object, from property category i select the connector and give the details.
    after that i select the user management and give
    authentication ticket - select
    Logon method- UIDPW
    User Management type- admin,user
    i saved till now
    in the display object i select the system alias
    then that screen displays
    In the system alias screen, i clicked on add button for adding alias then we r getting this message.
    User Mapping Status:  (Not ready for user mapping configuration)
    Please give the solution for solving this problem
    Regards,
    Sid.
    Edited by: sid m on Mar 11, 2008 12:15 PM

    Hi Krishna,
    I checked  the connection settings.
    WAS settings in system object is giving this mistake
    before user mapping it works fine.
    after giving usermapping i ma getting this exception.
    SAP Web AS Connection
      Test Details:
    The test consists of the following steps:
    1. Check the validity of the system ID in the system object
    2. Check whether the system can be retrieved
    3. Check whether a SAP system is defined in the system object
    4. Validate the following parameters: WAS protocol; WAS host name
    5. Check HTTP/S connectivity to the defined backend application
      Results
    1. The system ID is valid
    2. Retrieval of the system was successful
    3. The system object represents an SAP system
    4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (172.19.18.75)
    5. HTTP/S connection failed
    for testing the connector i am getting this exception
    Test Connection with Connector
      Test Details:
    The test consists of the following steps:
    1. Retrieve the default alias of the system
    2. Check the connection to the backend application using the connector defined in this system object
      Results
    Retrieval of default alias successful
    Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
    Regards,
    Sid.

  • 2 UWL System Alias Return 2 Workitem

    Dear Experts,
    I am getting confuse about UWL with webflow connector configuration.
    I have requirement to running standard workflow and user define workflow on SAP EP ESS/MSS.
    2 System alias or landscape must be activated.
    First SAP_WebDynpro_XSS, and 2nd SAP_BSP_EREC. Which is as i knew that standard workflow running on SAP_WebDynpro_XSS, whereas user define workflow running on SAP_BSP_EREC.
    But Why in UWL MSS SAP EP display 2 times for each task or workitem?
    I was done to define XML for Those 2 system landscape.
    For User define workflow, XML configuration look like
        <ItemType name="uwl.task.webflow.TS90000085.SAP_BSP_EREC" connector="WebFlowConnector" defaultView="DefaultView" defaultAction="launchWebDynPro" executionMode="default">
          <ItemTypeCriteria systemId="SAP_BSP_EREC" externalType="TS90000085" connector="WebFlowConnector"/>
          <Actions>
            <Action name="launchWebDynPro" groupAction="" handler="SAPWebDynproABAPLauncher" returnToDetailViewAllowed="yes" launchInNewWindow="yes" launchNewWindowFeatures="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no">
              <Properties>
                <Property name="WebDynproApplication" value="ZHRWD_BEN_APPROVE"/>
                <Property name="newWindowFeatures" value="resizable=yes,scrollbars=yes,status=yes,toolbar=no,menubar=no,location=no,directories=no"/>
                <Property name="DynamicParameter" value="wi_id=${item.externalId}"/>
                <Property name="openInNewWindow" value="yes"/>
                <Property name="WebDynproNamespace" value="SAP"/>
                <Property name="display_order_priority" value="5"/>
              </Properties>
              <Descriptions default=""/>
            </Action>
          </Actions>
        </ItemType>
    And standard workflow or tasks i am grouping on SAP_WebDynpro_XSS Landscape.
    Can anyone help me to solve this problem?
    Best Regards,
    Agnis Virtinova Avency

    Thanks a lot Shanti, Nice suggestion. I have been enabling support information to know which system alias or landscape had been used for each workitem.
    I have 2 UWL system configuration,
    1. System Alias : SAP_WebDynpro_XSS with Connector Type :  WebFlowConnector
    2. System Alias :  SAP_BSP_EREC with Connector Type :  WebFlowConnector
    FYI: I need to enabling leave request in ESS, so service SAP_WebDynpro_XSS must be used i think, that service refers to SAP Portal Server then SAP_BSP_EREC must be enable too for running WebDynpro Applications.
    I was done to setup for separated which task ID grouping at each landscape or system alias.
    But in UWL still return double workitems. Based on support information, 1 of workitems has been correct to read 1 of XML file configurations, but 1 other has information as shown below
    Item Type Configuration Name: uwl.webflow
    Item Type: uwl.task.webflow.default
    External Item Type: TS90000085
    Item Type: Associated View: DefaultView
    Internal Item ID: 4207
    External Item ID: 000000007540
    I think uwl.webflow configuration can't be changing. There are someone to help me to explain how that system work or solution of that problem?
    Thanks a lot,
    Virtinova

  • How to test System Alias

    Hello,
    How can I test a R3 system alias?
    - System Landscape Cockpit did not bring any results.
    - Support Desk >> SAP application requires transaction.
    Is there an easier way?
    Regards,
    AAAttar

    Thanks Senthil for the details,
    We are on EP6 SP2 at this point. Standalone (DEV) portal installation, and SAP Dedicated system (not Load-Balanced, ie No message server). I've create a test system to SAP_BW, with WAS info. When I tried to test the system in Landscape Cockpit, (selected the test SAP_BW system and JCO) I got NO results. I hope I'm not missing a thing.
    Few hours later, I created SAP role trasfer iview for testing, and this is what I got for this SAP_BW Alias:
    [The installed version of the portal plug-in must be 6.0 or higher], pretty obvious!
    For the other system I got, [Connect to SAP gateway failed Connect_PM  GWHOST=http://FQN.com:3200, GWSERV=sapgw00, ASHOST=http://FQN.com:3200, SYSNR=00 LOCATION    CPIC (TCP/IP) on local host ERROR       hostname 'http://FQN.com:3200' unknown TIME        Sat Dec  4 17:03:39 2004 RELEASE     620 COMPONENT   NI (network interface) VERSION     36 RC          -2 MODULE      nixxi_r_mt.c LINE        2225 DETAIL      NiIHostToAddr COUNTER     6]
    in my server: etc/services file:
    sapdp00      3200/tcp        # SAP System Dispatcher Port
    sapdp00s        4700/tcp        # SAP System Dispatcher Security Port
    sapgw00      3300/tcp        # SAP System Gateway Central Instance Port
    Regards,
    AAAttar
    Message was edited by: Aater Attar

  • ACE cli alias configuration

    is there any possibillity to cinfigure an cli alias on ACE ?
    I am wondering that a "show alias" is possible:
    ACE/Admin# show alias
    CLI alias commands
    ==================
    ACE/Admin#
    but the "normal" alias configuration doesn´t work, eg:
    ACE/Admin(config)# cli alias name shint show interface
                                  ^
    % invalid command detected at '^' marker.
    I use the following SW:
    Cisco Application Control Software (ACSW)
      loader:    Version 12.2[120]
      system:    Version A2(1.4a) [build 3.0(0)A2(1.4a) adbuild_12:09:43-2009/04/08_/auto/adbu-rel2/rel_a2_1_4_throttle/REL_3_0_0_A2_1_4A]
    thx

    Hi,
    I don't think that ACE supports alias commands.
    Indeed, the show alias command works, but is a hidden commandP:
    ACE/Admin# show  a
    aaa          access-list  accounting   acl-merge    arp
    ACE/Admin# show  alias
    CLI alias commands
    ==================
    ACE/Admin#
    also in config mode, no command to configure aliases.
    Looking in the command reference guide, no alias commands either.
    So I don't think you can create alias commands (maybe in the future?)
    I'm running A2(2.2)
    HTH,
    Dario

  • Delete system alias

    hello all,
        I deleted a system object, before deleting its system alias. Could anyone tell me how to delete the system alias? I tried searching for the system alias in the System Landscape overview too.  I did not find the system alias. If anyone has answer to this, please share with me. I will appreciate your help.
    Thanks,
    Sunitha.

    Hi Sunitha,
       Goto system administration -> system configuration -> system landscape overview. All the system and their alias are available here. But removing the alias is not possible this way.
      What I suggested will work. You must create the same system with the same name.
    Check this thread on the same
    <a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=182555">Thread on system alias</a>
    Regards,
    Saravanan

  • Different System Alias in one iView

    Hi all,
    I have an ESS/MSS Szenario based on EP7 SP13 and HCM (ECC 6). I have setup the business package and all is working fine. I have setup the different System Aliases like SAP_R3_HumanResources and SAP_R3_HumanResources_Meta etc. and I have a working Single Sign On between my Portal and the HCM system.
    I now face the challenge to change one link within the working time iView to point to a different system than all the others!
    Let me explain: I have a second ERP 6 system that provides for the actual working time Web Dynpro and this Dynpro is not provided by the HCM system. I think I need to change the target for this one Dynpro to point to the ERP instead of the HCM system while all the other links in the working time iView still have to point to the HCM system!
    I have no idea whatsoever, how to do this. I checked the PCD but I can't seem to find the right place where to adapt the System Alias for an iView at all. Can someone point me in the right direction?
    Kind regards,
       Christian

    No you're not
    In fact you lack the System and System alias that point to you're new ERP 6.
    Here a link with a demo that explain how to create the system and define its alias : [demo|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/24d8faf9-0701-0010-c99c-aabbdb7e95f4] .
    Informations needed are the same you can find in a saplogon for the system you want to connect to.
    Once you'll have defined system and alias you'll see it in you're listbox!
    Anyway you'll still face the last problem : you can't define multiple system alias for the same iView.
    Hope that helps!!
    Edited by: Seb on Jan 9, 2008 4:34 PM

  • Getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength) ...

    Hi Team,
    I am getting error while tring to Check in any document in Sharepoint 2007. Error - "Unable to validate data. System.Web.Configuration.MachineKey.GetDecodedData(Byte[] buf, Byte[] modifier, Int32 start, Int32 length, Int32& dataLength).
    Anybody please let me know how to resolve the issue. It has affected our 9 site collection with almost 2000+ sites. Please email me your your suggestion or you can share your ideas here also.
    Tried to reset the IIS, checked the Internet connection speed (8MBps). Cleared the cache and all but no luck.
    Thanks,
    Pronob

    Hello,
    I have found this support window for you:
    http://support.microsoft.com/kb/556031
    http://technet.microsoft.com/en-in/library/cc298582%28v=office.12%29.aspx
    This may help you
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Creation of System Alias between Portal and E Sourcing System

    Hi Team,
    I would like to create a System Alias between SAP Portal 7.4 and E Sourcing System 10.0. I would like to know during the creation of System Object which template i need to take (is it http System or R/3 System using Load Balancing).
    If it is a HTTP System, I am getting  ""Could not find Connector Factory value: null"".
    Could you please help me in knowing what could be the issue.
    Pls. Note: E Sourcing is a Java based SAP System.

    Hi Sankar,
    Please go through the below SAP Note and see if that helps.
    711769 - SSO between SAP Java Software Products
    BR,
    Anurag

  • Connection tab is inactive during the creation of system alias in portal

    When we trying to implement the note 1249323, during the creation of
    system alias in portal (Step B in SRM 7.0), the connection tab is
    inactive to fill the information (EP-PCT-SRM).
    Please can anybody give a solution to this problem so that we can finish our
    implementation of the note.
    Thanks and regards
    Mahesh

    If you are referring to the property "Collection" of the system object - I don't think you can edit it. It is not used at runtime by the applications/iviews.
    That should have been a mistake in the SAP note and you can ignore that property and go ahead with creating your system.
    Thanks,
    Shanti

  • System alias does not work if not the same as logical system name?

    In most of the situations, we define the portal system alias same as the connected R/3 client logical system name.
    I also saw some exceptions that system aliases were defined differently from the connected R/3 client logical systems, and they were tested fine.
    However I forget the way to make that working.
    Could you help me  recall how is that achieved?
    Thanks!

    Hi,
    There is nothing tricky here. Just assign more System Aliases to the system connector !

Maybe you are looking for