System Alias is not coming in dropdown of System under Find Data Services

I am having role in VC.
In Visual Composer studio. I Clicked on Find Data option at right pane of the window to get
Find Data Services window.
In this window, I am not able to see the system alias from the dropdown list of the System field.
Appreciate your help.

Hi
Inside Visual Composer , Goto Tools >Options> Compiler .
Remove the Checkbox for Mask Unsupported Features.
Click Ok.
Now try the Find Data
It worked for me.
Regards
Rajendra

Similar Messages

System Name is not coming

Hi,
I have created a new technical system in SLD. Now while I am creating a JCO connection for Metadata System Name is not coming.
Message Server   : New technical System name is coming here
System Name      : Its coming blank(It should have SID value)
Logon Group      : Blank
Regards,
Prakash Jha

Hi,
please Configure the SLD Data Supplier in Visual Administrator.
Refer http://help.sap.com/saphelp_nw04/helpdata/en/ea/cd2e807e0e45bf9da67354f452fc05/content.htm
Hope that helps.
Regards,
S.Divakar

HT1937 HI I HAVE AUTHORIZATION 5 SYSTEM AND NOW IM NOT HAVING THAT SYSTEM NOW IM NOT ABALE TO AUTHORIZATION MY SYSTEM ITS SHOWING U HAVE AUTHORIZATION 5 SYSTEM AND I DON'T HAVE THAT 5 SYSTEM PLS CAN U HELP ME IN THIS IM NOT ABLE TO DOWNLODE ANY THING PL

HI I HAVE AUTHORIZATION 5 SYSTEM AND NOW IM NOT HAVING THAT 5 SYSTEM NOW IM NOT ABALE TO AUTHORIZATION MY SYSTEM ITS SHOWING U HAVE AUTHORIZATION 5 SYSTEM AND I DON’T HAVE THAT 5 SYSTEM PLS CAN U HELP ME IN THIS IM NOT ABLE TO DOWNLODE ANY THING PLS DO THE NEED FULL

When you post again, don't do it in caps.
They are considered shouting and are much more difficult to read.
Allan

System alias does not work if not the same as logical system name?

In most of the situations, we define the portal system alias same as the connected R/3 client logical system name.
I also saw some exceptions that system aliases were defined differently from the connected R/3 client logical systems, and they were tested fine.
However I forget the way to make that working.
Could you help me recall how is that achieved?
Thanks!

Hi,
There is nothing tricky here. Just assign more System Aliases to the system connector !

System Type ERP not available while creating Buisness System For ECC in SAP Sourcing 9.0

Hi,
I need to import Master data in SAP Sourcing but when i am uploading master data i am getting this errror
Business system ECQCLNT340 does not match with local SAP Sourcing System ID SOURCING.
i have followed the steps in config guide of SAP ERP with SAP Sourcing.
when i am creating business system in SAP Sourcing system type ERP is not available.
i have also attached the error file, please check
--------------Version---------------
ECC 6.0 Ehp6
SAP Sourcing 9.0 on NW7.3 Ehp1 on IBM DB2
Thanks and Regards,
Murtaza Najmi

Thanks you Prasad,
this issue has been resolved and i have completed the installation part of SAP Sourcing and Contract generation.
Now , I am getting error while uploading clause document, my functional team member are not able to upload clause document. kindly suggest.
----------------------Error Description---------------
Login with buyer link into the system-> it has all authorizations
then Goto -> Contract Management -> Clause Library -> Clause list -> Click on New button -> Click on Add button -> Browse Document
it is showing POPUP with Error that "There is a problem with the Contract Generation web service Contact your system administrator"
Thanks and Regards,
Murtaza Najmi

I downloaded lion and cloud does not show up in my system preferences. Not sure how to get started without finding icloud., I downloaded lion and cloud does not show up in my system preferences. Not sure how to get started without finding icloud.

I just downloaded lion and cloud does not show up in my system preferences. Where is it hiding so I can set up icloud and see what lion is offering that is different from snow leopard.

I purchased Lion on the app program but that did not seem to update my software or my operating system. Curious. It showed up on my menu bar saying it was downloading then disappeared. I can't seem to find it anywhere. Suggestions where I should look to make sure it is installed (which clearly it isn't)
Thanks Roger

Not able to login to Gtalk - Error messgae: Data Services unavailable

Model: 9860
OS: 7.1.0
Gtalk: 3.0.0.23
Active connection during issue: Wi-fi
Mobile Service: Vodafone
When ever I try to login, I get this error message: Data Services Unavailable. All the time i try to login, I am active on wi-fi connection. Please help on following:
1. Is there a way to make wi-fi connection as primary/default internet access point and not data/3G services
2. How to make gtalk work on wifi connection without data/3g plan.

Now that I have data plans activated, Gtalk is working.. it would have been good to have some IM apps work with WiFi connectivity...

Messages/Data not coming to Quality XI System

Dear Xi experts,
Scenario : RFC to IDOC
When i execute the RFC program in SAP system based on the variant, i am not getting any data in my Quality XI system.
I checked the connections (RFC Parameters) from SAP and XI quality...looks it's working fine.
Regards,
Ramana Kumar. A

Hi,
Never delete the messages in SMQ2 - this will not sort out your problem.
If your messages are reaching the queue in the application system (ie. can be seen in SMQ2) your problem is the QIN scheduler is not running. This transfers the messages from the application queue to the XI system.
This is something Basis can help you with.
Kind regards
Colin.

Gif images is not coming in oracle forms 9i under linux

I am trying to show images using Read_Image_File under
linux os ,at run time i am not able to see images.
If any one solution pl mail me at [email protected]

A couple of suggestions -- put the image files in your FORMS90_PATH that is set in default.env, and also be aware of case-sensitivity of file names.

Help! my EFI System update says not supporting for mountain lion system! Why is that so? and i check my bios and boot rom version but still this happening? why is this happeneing and i cannot open hardware test?!

hello people i folow the steps of hardware test opening thing while starting up, but since i instaled mountain lion its not showingup!? why the **** is that so?!

Then it's not for your model MacBook Pro.

The specified HTTP method is not allowed for the resource identified by the Data Service Request URI

Hi Experts,
I am getting following error in creating gateway service. 405 method not allowed.
I am trying to update a table using put method.
Regards,
Dinesh Jeyasurian

Hi Dinesh,
you are getting error because it is not the correct way to perform PUT operation.
Please refer my blog Let’s code CRUDQ and Function Import operations in OData service! and see section Update operation.
Regards,
Chandra

Can't find my iPad :( not showing up on my devises under find my iPhone

How do I locate my iPad. It's been missing for a week and isn't showing up in my devices in my find app

If you can't find it via Find My iPhone / http://icloud.com then you won't be able, that is the only way to try and locate it - it won't show if you didn't have Find My iPad enabled on it and/or it's not connected to a network.
If you think that it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc., and if it was a cellular model then you should contact your carrier.

Problem in creation of system alias for bw system

Hi,
I want to create system alias for the bw system
system admin->sys Config->system landscape->portal content->my own folder
for this folder i created the system object
after creation of system object, from property category i select the connector and give the details.
after that i select the user management and give
authentication ticket - select
Logon method- UIDPW
User Management type- admin,user
i saved till now
in the display object i select the system alias
then that screen displays
In the system alias screen, i clicked on add button for adding alias then we r getting this message.
User Mapping Status: (Not ready for user mapping configuration)
Please give the solution for solving this problem
Regards,
Sid.
Edited by: sid m on Mar 11, 2008 12:15 PM

Hi Krishna,
I checked the connection settings.
WAS settings in system object is giving this mistake
before user mapping it works fine.
after giving usermapping i ma getting this exception.
SAP Web AS Connection
Test Details:
The test consists of the following steps:
1. Check the validity of the system ID in the system object
2. Check whether the system can be retrieved
3. Check whether a SAP system is defined in the system object
4. Validate the following parameters: WAS protocol; WAS host name
5. Check HTTP/S connectivity to the defined backend application
Results
1. The system ID is valid
2. Retrieval of the system was successful
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (172.19.18.75)
5. HTTP/S connection failed
for testing the connector i am getting this exception
Test Connection with Connector
Test Details:
The test consists of the following steps:
1. Retrieve the default alias of the system
2. Check the connection to the backend application using the connector defined in this system object
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
Regards,
Sid.

System tablespace space not regained when objects are dropped

Mine is a Oracle 10g 10.2 on windows.
I am importing a export file into a user ,It takes some amount of space in SYSTEM and another tablespace .When I drop the user space in system tablespace is not coming back. ANY IDEA WHY
BEFORE IMPORT
SQL> select sum(bytes)/1024/1024 from dba_segments where owner='SYSTEM';
SUM(BYTES)/1024/1024
22.1875
SQL> select sum(bytes)/1024/1024 from dba_segments where owner='SYS';
SUM(BYTES)/1024/1024
544.1875
SQL> select sum(bytes)/1024/1024 from dba_segments where segment_name='SOURCE$';
SUM(BYTES)/1024/1024
41
I use the following commands to import
SQL>create user <username> identified by <password> default tablespace <tsname> quota unlimited on <tsname>;
SQL>grant create session,imp_full_database to <username>;
imp system file=filename.dmp log=logname.log fromuser=<username> touser=<username> statistics=none
AFTER IMPORT
SQL> select sum(bytes)/1024/1024 from dba_segments where segment_name='SOURCE$';
SUM(BYTES)/1024/1024
53
SQL> select sum(bytes)/1024/1024 from dba_segments where owner='SYSTEM';
SUM(BYTES)/1024/1024
22.1875
SQL> select sum(bytes)/1024/1024 from dba_segments where owner='SYS';
SUM(BYTES)/1024/1024
728.375
AFTER DROPPING THE USER/SCHEMA
SQL> select sum(bytes)/1024/1024 from dba_segments where owner='SYS';
SUM(BYTES)/1024/1024
728.375
SQL> select sum(bytes)/1024/1024 from dba_segments where owner='SYSTEM';
SUM(BYTES)/1024/1024
22.1875
SQL> select sum(bytes)/1024/1024 from dba_segments where segment_name='SOURCE$';
SUM(BYTES)/1024/1024
53
I even tried deleting the objects first and then dropping the user
SQL> delete from source$ where obj# in(select object_id from dba_objects where owner='USERNAME');
211252 rows deleted.
SQL> commit;
Commit complete.
SQL> drop user USERNAME cascade;
User dropped.
The space used by the schema on system tablespace is not coming back.

Hi user509593!
Adding objects to a tablespace requires space in that tablespace. This space is managed in segments and extents. If an extent is fully used (that means 100 % usage) a new extent will be added to a segment. Oracle uses a mechanism called "High Water Mark" to mark the last used extent.
Your problem is that oracle don't set this High Water Mark back if you are dropping objects from a tablespace. Once an extent is marked as it it retains marked as used.
Before Adding Objects:
u = used Extent
x = free Extent
| = High Water Mark
uuuuuuxxxxx
...........|
After Adding Objects:
uuuuuuuxxxx
............|
After dropping objects:
uuuuuuuxxxx
............|
The only chance to get your "unused" space back is to reorganized your tablespace. But before you reorganize something please read the documentation to know all about the costs and traps that comes with reorganization.
Hope this help!
null

File read write program output not coming correct

this code is compiling without issues but the output is not what i am expecting .. the contents of delta.txt are as follows
*4014254420*
*2897449776*
*4207405601*
and the output thats coming is
+4014254420+
+40142544204207405601+
+4207405601+
its not reading the 2nd line somehow
import java.awt.FlowLayout;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.File;
import java.io.*;
import java.io.FileWriter;
import javax.swing.*;
import java.util.Scanner;
public class testloop
          static int i;
           static char c;
           static int j = 1;
                static String filename;
public static void main(String[] args) throws IOException
try {
     FileReader fmi = new FileReader("delta.txt");
     FileWriter fmo = new FileWriter("Updated.txt");
     BufferedReader br = new BufferedReader(fmi);
               String temp=null;
                    do{
                    temp = br.readLine();
                    if(temp.startsWith("*"))
                         String tempc = temp.substring(1);
                         System.out.print(tempc+"\n");
                        long tp = Long.valueOf(tempc);
                         System.out.print(tp);
               else
               fmo.write(temp);
                    }while((temp=br.readLine()) != null);
               fmi.close();
               fmo.close();
               }catch (FileNotFoundException e){ System.out.print("not found");     }
               catch (IOException e){System.out.print("io"+e);
               e.printStackTrace();
    also if i use the following delta.txt
**4014254420*
**2897449776*
**4207405601*
mmm+
i get the output as
+4014254420+
+40142544204207405601+
+4207405601Exception in thread "main" java.lang.NullPointerException+
at testloop.main(testloop.java:33)*
its not writing the text to the file updated.txt
Edited by: adhiraj on Nov 27, 2007 6:58 AM

You are getting the next line twice.
do{
                    temp = br.readLine();
                    if(temp.startsWith("*"))
                         String tempc = temp.substring(1);
                         System.out.print(tempc+"\n");
                        long tp = Long.valueOf(tempc);
                         System.out.print(tp);
               else
               fmo.write(temp);
                    }while((temp=br.readLine()) != null);You need to change your code around so that you only call
temp=br.readLine();once per iteration of the loop.

System Alias is not coming in dropdown of System under Find Data Services

Similar Messages

Maybe you are looking for