SYSTEM ALLERT-URGENT NOTIFICATION

I recieved a call from "SYSTEM ALERT-URGENT NOTIFICATION" and it told me I was not protected and to go to the following site, I have just notice that the site I was directed to is not permitted. Can you please explain to me what it is all about. just wondering is this a safe site.
looking forward to hearing from you
Regards
juls1953

it's s scam.
please visit the thread below for instructions and suggestions on how to deal with such unwanted and suspicious activities;
How to Handle Suspicious Calls, Messages and Contact Requests (Scam/Spam)
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

Similar Messages

Receiving "SYSTEM NOTICE - URGENT ONLINE REPAIR" n...

I am weekly receiving a "SYSTEM NOTICE - URGENT ONLINE REPAIR" message is being sent to me from bog.repair.service.3 Is this legit or a scam?

Hi there is already tons of topic about that.
It's SCAM, please block and report.
Devise Shadok : S'il n'y a pas de solution c'est qu'il n'y a pas de problème...
Mon profil

System wide alert(notification)

Can we show system wide alert(notification) using any of the J2ME MIDP 2.0 function. It is something like we have our MIDlet is runing, and the we move to some other screen, likeContacts or Message, and afterwards some activity takes place in our MIDlet running in background, so can we show some notification or alert at that time to let user know for that activity without being actually in that MIDlet.
Do reply.

Josef,
Somewhat chasing the point here - when you have the Solman and you look in your CCMS and you can see the other systems - it is all RFC data and not actually on the Solution Manager (the only local MTE's are those tha belong to the Solution Manager). For the Solution Manager to Centrally Auto-React to threasholds (act as the CEN System), the information needs to be passed to the Central System through the agents.
If you want to do email threasholds on your remote systems, you can configure it on each of the systems individually without agents as this is a CCMS Function that any SAP System can do - but this is not Central Auto-Reaction. This is just actions taken on individual systems based on local MTE's.
To Centrally Auto-React - you have to add the agents so the information is passed to the CEN to react on.
I hope that this has clarified the situation a bit more. If this answers your question, please set this thread to answered.

Maintenance Work Center, user status, system s into notification print out.

I want to copy Maintenance Work Center(GEWRK), active user status and active system status to notification print out. I am not able to search from which table this field is coming. Can any body tell me the name of table ?
Regards,
VM
Edited by: V M on Oct 5, 2008 4:03 PM

VM,
It may not work with print programs, but try putting the following code in your ABAP program:
* get notification statuses
data: lt_jest      type standard table of jest.
    call function 'STATUS_READ_MULTI'
      exporting
        all_in_buffer = 'X'
      importing
        status         = lt_jest.
If that fails, then try this:
data: lt_jsto_pre type table of jsto_pre with header line.
data: lt_jest      type standard table of jest.
call function 'STATUS_READ_MULTI'
       exporting
            client      = sy-mandt
            only_active = 'X'
       tables
            objnr_tab   = lt_jsto_pre
            status      = lt_jest.

URGENT NOTIFICATION ROBOCALLS

We use Skype as our home phone so it's left on and turned up all the time. I get two and three calls a night from the urgent notification message that I already know is a scam. I block and report abuse every single time but I still continue to receive them. Can nothing be done about this? Is there a way to block robocalls on Skype and if theres not, can you make one?

aubreyswife wrote:
We use Skype as our home phone so it's left on and turned up all the time. I get two and three calls a night from the urgent notification message that I already know is a scam. I block and report abuse every single time but I still continue to receive them. Can nothing be done about this? Is there a way to block robocalls on Skype and if theres not, can you make one?
Change your Skype privacy settings to allow calls and IM's from....only people on my Contacts list.
Please note: I do not respond to requests for help via Private Message.

What is system notice urgent (helps)

I keep getting calls from ( system notice URGENT (HELP.S4
PLEASE HELP.

This is a phishing attempt.
To avoid receiving any Calls like this, you can adjust your privacy to, Change Allow Callss from... "anyone" to "people on my Contact list only".
http://community.skype.com/t5/Windows/Does-anyone-know-what-quot-sys-help-bn3-quot-is/m-p/967658#M71...
You may also block and report the scammers.
https://support.skype.com/en/faq/FA10488/how-do-i-block-or-report-a-contact
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

*** SYSTEM NOTICE - URGENT ONLINE REPAIR ***

Hello I was wondering/doubting this is a serious message. I'm recieving calls from this caller *** SYSTEM NOTICE - URGENT ONLINE REPAIR *** I have avoided answering this call not sure why but I just hate spam & people not being honest. Is this caller known? Cheers silversurfergh

reporting those callers to Skype will significantly help in eliminating this unwanted callers. Customers' reports will flag Skype of the suspicious activities of those unwanted calls, and may block their account or prevent them from using Skype services if deemed necessary.
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

System Messages in Notification

Hi,
In notifications, if we put Malfunction end time in future, there is a system message IM477, Malfunction date entered is in the future, but this is warning message.
How I can make it to an error message.
Thanks

Hi,
Continuance the question bellow, if i'll use user exit QQMA0014 before saving in order to get an error massage (IM477) so the result will be that first i'll have the warning massage (IM477) and after saving i'll have the error massage from the user exit
This situation is no good, may someone have a better solution for this?
Cause i dont want the warning massage.
Regards
Shirly

Backup RAC with RMAN..(on diff file system)..URGENT..HELP NEEDED

hello all,
I have not work a lot on SAN storages. One of my client has implementated 9i RAC. Now he wants to Add two more disk in SAN storage (Implemented RAID). So sun engineers will do this but before this i have to take full database backup(80GB database) throught RMAN. The problem or confussion from my side is that the database is on Sun SAN storage and i have to put the Full database backup taken by RMAN on local hard disk on the node (node 1 of rac). Is the possible since the SAN storage is RAW file system (as i guess) and i am putting the backup on local system.
Please help me out ...i have do this in couple of days..
Please tell me prosedure too to how to change the path of backup in RMAN if above is possible..
Its urgent
Thanks and Regards!!
Pankaj Rawat

You best bet is to get your san folks to give you some disk space for a mount point on the last node in the cluster. Once they assign the lun (not raw) have your SAs make it a mounted file system such as /dbbackup.
Run all of your rman backups on your last node on the cluster. The only draw back is, if that node dies, then you will not be able to run backups. but your backups would be safe as they are on the san.
Only way to have a mounted file system on all nodes in your cluser is to have some sort of third party file system cluster ware .. such as veritas or OCFS2 - then all nodes could see it.
I feel the first node in the cluster (the primary node) is the most busy out of the rest .. so thats why the suggestion of running rman on the last node in the cluster.

New User Creation in an ABAP system and email notification

Dear All,
We are on SRM 7.0.
When a new user is created in an ABAP System ( SRM 7.0) , we want an email to be sent to the user with the user name/password?. How can this be done?. Can this done by some config settings?.
Thanks
velu

Hi,
Probably you may need to define some workflow for the same. With the help of your ABAPER you can do it.
Regards,
Sharath Babu M

Source system change urgent

Hi,
I have my BW dev cltn connect to source system 630 ..now the client 630 has been dropped and it has to be connected to 650...what sholud be my steps...i ahve seen BDLS transaction but can any 1 who has done it b4 guide me.
Thanks
Prashant

hi prashant,
check this out.
Note 886102 - System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
Fresh source system clients in production BW system
Note 195610 - Logical system name conversion in T000
Note 121163 - BDLS: Converting logical system names
hope it helps,
regards,
Parth.

PVC2300 - Video Monitoring System (3 urgent questions)

Hi there,
I'm pretty sure these questions have been asked before - but could not find answers to these.
Setup:
When running a Video Surveillance setup, with up to 16, PVC2300 cameras connected to the Video Monitoring System (LBAVMS16):
1. Does the PC running LBAVMS16 need to be "on" all the time for the video feed to be stored on a NSS device?
2. Is there any difference between the "old Linksys" monitoring software and "LBAVMS16"?
3. Can you run a mixed camera (WVC2300 and PVC2300) environment using "LBAVMS16"?
I have a partner testing the solution and I would guess they are not the only ones facing these same questions.
Many thanks in advance!
Rasmus Almqvist, Territory Market Manager
Phone: +358 40 774 6719
Email: [email protected]

Hello,
First, you want to use SWVMS16. Its the newer Small Business Software Video Monitoring System that will work with WVC210, PVC2300, WVC2300, and PVC300 (new).
http://www.cisco.com/cisco/web/solutions/small_business/products/security/small_business_video_surveillance_cameras/index.html
The 'latest' version you will find here is 1.0.0, but when we announce the PVC300 orderable, that should go to 1.0.1.
Please upgrade both the PVC2300 and WVC2300 to 'Camera' FW version 1.0.1 for it to work with SWVMS16.
This SW is free so just come back and check in the coming weeks for the update.
The older LBAVMS16 will not support the PVC300 and has the old Linksys SKIN and is actually a different SW completely.   The newer one is the Cisco small business offering we will have going forward.   The older SW would allow you to set up the motion detection and then it would run in the task bar, and it would record as motion occurred, even though it was not open.
The new SWVMS16 has a concept of a MAIN console (role based access) and after you define the 'Always' on or 'Motion Detection' configuration, you will then need to click on START/STOP in the Recordings GUI Drawer and select START RECORDING SCHEDULE and then all the cameras will have a Green LED indicator on the screen showing they are active and ready and will follow the configuration.   You can minimize it at this point, but you cant close it. CLosing it will stop the schedule.   The datasheet should show the PC requirements to run this application, and to be honest, if you have more than 4 cameras, this is not a part time task. Of course, it will depend on the Video quality you set up on each camera, but you will find monitoring 8 cameras will use your CPU and Memory (run the Windows Task manager to see). This is why for 16 cameras, we recommed a very powerful PC with alot of RAM.
I am running a Dual Intel Core 2 CPU 6400 @ 2.13GHz Machine with 1 GB or RAM and with 4 cameras at Highest quality it runs at 45-55% CPU utilization, just as an example.    So the point is this PC should be pretty much dedicated to this function of monitoring, recording, playback.
Now keep something else in mind. The Cameras (all of ours) dont need the SWVMS16 to do motion detection to NSS, or EMAIL. The cameras themselves can FTP (client) motion detection (MPEG4 or MJPEG) direct to NSS (FTP server) or SMTP Mail. Its configured on the Camera.   And with a PC Browser, you can monitor the Camera, or QuickTime, etc. The SWVMS just makes it easy to monitor them all in one place with all the convenience and functions you would use in a SMB. So technically SWVMS16 is not needed to operate motion detection to the NSS, but if you are running SWVMS, then yes, it needs to be on.
In fact, I run BOTH on my cameras. That is, I have them set to FTP to my NSS, and I also have them monitored by SWVMS. Our Cameras are dual stream, dual codec, and have no problem with this, and can be monitored from up to 10 HTTP servers as well (RTSP increases that), which is usually enough.
An interesting twist, which is also practiced and supported, is defining the NSS File Share as the SWVMS16 Video Storage location. Just another option to consider.
Hope this clarifies a little?
Steve DiStefano
SE US Field Channel

HFM System Error (URGENT)

Hi All,
I am confronting an error in HFM 9.3.1. This is a system log error.
The error is "*_Error: The maximum calculation limit of 5 was reached_*."
I am unable to guess what the reason may be.
I tried to go in Hyperion Reporting and search for any formulae error but was unable to find one.
Can anyone please suggest what could be the possible cause of such type of error?
Regards,
SN

Hi,
A similar issue is resolved, please check the below thread:
Re: HFM CONFIGURATION
Hope this helps,
Thank you,
Charles Babu J

Output Difference in different Production system. Urgent

Hello All,
In the development system we have screen exit in QM02/QM01 with two block b1 and b2.
This is transported to several production systems.
Now the problem is :
In some systems it is working good. But in few only one block is displayed.
Please help.
Thanks,
Kunal

Check for linkages. Is the binding activated betwwen workflow to task container.
Check whether values appear in task container or not.
Then check for binding between task & method container. Is there any event linked with the task. Is the event linkage is activated.
The problem might be resolved if all the linkages are correct.

"SYSTEM NOTICE - URGENT! (system.lsrs) is not in y...

I received that message. Can someone tell me if that is a scam or do I need to have system.lsrs in my contact list?

This is a known scamming.
To avoid receiving any IMs like this, you can adjust your privacy to, Change Allow IMs from... "anyone" to "people on my Contact list only".
http://community.skype.com/t5/Windows/Does-anyone-know-what-quot-sys-help-bn3-quot-is/m-p/967658#M71...
You may also block and report the scammers.
https://support.skype.com/en/faq/FA10488/how-do-i-block-or-report-a-contact
Regards,
Tamim
Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

SYSTEM ALLERT-URGENT NOTIFICATION

Similar Messages

Maybe you are looking for