System and landscape estiamte for SCM on Hana for Practice use

Hi All ,
We want to know the System and landscape estiamte for SCM on Hana for Practice use.
Regards,
Abhishek

Hi,
Perhaps this link could help
http://wiki.sdn.sap.com/wiki/display/SMSETUP/MaintenanceofProductintheSystemLandscape
Also check out the note :
For SCM Add-On Products like SAP SNC, SAP EM, SAP F&R the basis component (SAP Netweaver Release) has to be also assigned as relevant Product Instance
Might be helpful, if you check the product versions being reported for the system in the SLD.
Regards,
Srikishan

Similar Messages

  • I have a Comcast system and am going through a Bose amp for sound.  The comcast box has an HDMI port which I've used for the Apple TV connection.  Nothing works! Help.

    have a Comcast system and am going through a Bose amp for sound.  The comcast box has an HDMI port which I've used for the Apple TV connection.  Nothing works! Help.

    Thanks.  Thought that would be the solution but for my wall mounted TV it's going to be a problem but many thanks for your reply.....

  • What is r3 systems and landscapes ,

    hi
    what is r3 systems and landscapes , what is diffrence between this

    Hi Shivaji,
    R/3 System is a Set Of Layers 1. Application
    2. Data Base
    3. Presentation
    Where u can get in touch in one shot.
    R/3 system
    R/3 System Architecture
    And Lanscape is depend upon Client
    See thre Below Links
    Landscape
    Re: Land Scape...?
    Reward If Helpful..
    Regards..
    Praveen Kumar.D

  • System and Query field disable in Data Manager for Netweaver BI

    Dear All.
    i have installed Xcelsius Engage Server 2008, when i try to add connection for SAP Netweaver BI from the Data Manager the dialog appears correctly but in Defination TAB only the Name field is enable both System and Query field is disable.
    without that how can i configure the connection please let me know how to fix this issue.
    Kind regards,

    Hi,
    You give the name of the connection and then click on "Browse".  It will then prompt you to connect to the desired system.  Log in and then select the appropriate query you want to build a dashboard on.
    Hope this helps.
    Regards,
    RashmiG

  • HP 635 w/Virus Killed restore system and now I cannot even startup, ask for a disk!!! Yikes

    HP 635 got a Virus that plays ads in the Background and was not even present in the system manager, I did a restore system several times and could not finally did but now I cannot even startup, ask for a disk!!! Yikes
    This question was solved.
    View Solution.

    Hi:
    Call HP technical support for the country you live in at the link below.
    http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    Call the number listed for business desktops/notebooks and order a set of recovery disks for your model.
    You will also need to provide the serial number to the customer services rep.

  • Parties, Business Systems and Business Services

    Hi guys,
    I've read a lot about items in subject, but have some doubts about applying them to my scenario. I have to integrate SAP system and web service.
    As far as I understand concepts, this is B2B communication, so I have to use parties. To represent SAP system I use Business System, as it's described ins SLD,  and for Web service I use Business Service... just as we use business services for web services
    --- Am I right here? Will it work ok in reciever determination, agreement?
    Thank you.

    Hi,
    You are doing the usage of business systems and services in proper way.
    The scenario will difinately work with combination of business system and service.
    It will be fine for all other configurations such as Receiver Determination, Sender/receiver agreements and interface determination etc.
    Please see below the importance of Parties, Business Systems and Business Services 
    A communication party
    A communication party (party for short) represents a larger unit, which is involved in a collaborative process. Using a communication party, you generally address a company within a cross-company process. 
    You can assign a communication party one or more services to address it as the sender or receiver of messages.
    A business system
    If you want to address a particular business system as the sender or receiver of messages, choose this service type.
    A business system is an actual application system in a system landscape. A business system (service) comprises information about the inbound and outbound interfaces and the software component versions of the business system.
    You usually use business system services when configuring internal company processes.
    A business service
    If you want to address an abstract business entity as the sender or receiver of messages, choose this service type.
    Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
    You usually use business services when configuring cross-company processes. In this case, you only make your interfaces known to the business partners involved and either do not make any details about your own system landscape available, or only specific details. 
    For example, you can define RosettaNet Partner Interface Processes (PIPs) as business services.
    Thanks
    Swarup

  • Transaction Launcher Logical Systems and URLs

    Hi,
    I'm facing a problem with Transaction Launcher.
    I've done all the settings specified here: http://help.sap.com/saphelp_crm60/helpdata/en/46/231befc17b5872e10000000a11466f/frameset.htm
    Under section "Define Transaction Launcher Logical Systems and URLs" I've specified the values for Quality System: the ECC system is MQAS200A
    By the way, when I try to access an ERP Sales Order, the transaction CRM_TL_ERP_BUS2032_DISPLAY tries to access system MSVL200A (which is the Development ECC System).
    I cannot change the Logical System within the Transaction Launcher Configuration (currently it is set to ERP), since the Transaction is standard.
    Does anybody know how to map the generic value ERP with the correct value MQAS200A instead of MSVL200A?
    Thanks in advance,
    Regards,
    Andrea Ricci

    Hi,
    You cannot generalize the Logical system name, for the workaround you need to put the logical system for quality and transport it to quality and it should work and to check in dev you need to again change the log. sys to dev and save it but dont transport it. Similarly you can do for production system.
    Regards,
    Shobhit

  • Example for SCM-Forms Integration

    Hello Everrone
    I have been asked by my boss to use Oracle SCM and load all our 20 forms applications inside repository, I have read the PDF "Using Oracle9i SCM for Software Configuration Management" and managed to demo the check in and check ot scenario but when finalizing and documenting the process for my other team members, i found out that the repository manager have to create a shared workarea and each user will create a private workarea based on that shared workarea, I can not create a shared workarea, whenever i create a new workarea it get stored under the private workarea section.
    so my question is ... how to create a shared workarea? and if anybody can guide me what is guide or tutorial that i should look for the have the best practices using Oracle SCM with forms.
    Thanks in advance and wonderful day for everyone.

    Oracle Repository provides a Workarea Wizard - a predefined set of screen forms that take you step by step through the process of workarea creation. When you create a workarea, it is initially a private workarea, meaning that only you can access it. Subsequently you can, if you wish, grant one or more other users access to it, thus making it a shared workarea. If you later revoke access to the workarea from all other users, the workarea becomes private again. Note that the repository owner must have assigned you the Workareas repository privilege before you can create workareas.

  • TADM70: SAP System: Operating System and Database Migration

    Dear Colleagues,
    SAP is offering a rare opportunity to participate in "TADM70: SAP System: Operating System and Database Migration" in North America.
    For details please see
    <a href="https://service.education.sap.com/sap(bD1lbiZjPTAwMSZkPW1pbg==)/bc/bsp/sap/hcm_learning/trainingtype.htm?sap-params=b3R5cGU9RCZvYmppZD03MDAxNjA1MA%3d%3d">TADM70</a>
    Usually this class is held only at overseas locations. SAP is willing to arrange it in North America. However we need to gather enough participants for this event to occur.
    If you are interested and eligible to participate you could prebook this class at SAP Education Portal  <a href="https://service.education.sap.com/sap(bD1lbiZjPTAwMSZkPW1pbg==)/bc/bsp/sap/hcm_learning/prebookings.htm">TADM70 Prebooking</a>  and you could also contact Annie Normand [email protected] or myself.
    Best regards,
    Alexander Perelygin
    SAP NetWeaver Team Lead
    Terasen Gas Inc
    E-mail: [email protected]
    Phone: 604-592-7519

    Dear Collegues,
    TADM70 : SAP System: Operating System a Classroom Training
    will be held
    09-Jun-2008 - 11-Jun-2008
    at SAP Toronto Training location.
    TADM70: SAP System: Operating System and Database Migration
    Schedule
    Day Date From To
    Monday 09.06.2008 09:00 17:00
    Tuesday 10.06.2008 09:00 17:00
    Wednesday 11.06.2008 09:00 17:00
    Availability
    Location Language Price Free Places Start Date 
    SAP Toronto English 2325.00 CAD Yes 09.06.2008 Add to Shopping Cart
    Taxes are not included in the price. 
    Contact Information
    Address:  SAP Toronto Bloor
    1600-2 Bloor St. East
    M4W 1A8 - Toronto  Phone:  416-929-9746  Fax:  416-927-2160 
    Those who interested please book it at SAP Education web site or by phone.
    Alexander Perelygin

  • In SAP BW landscape we should have separate servers for DEV, QA and PROD

    Hi all,
    In SAP BW system landscape we should have separate servers for DEV, QA and PROD.
    whether one server is enough for DEV and we can use virtual servers to QA & PROD?
    Regards,
    chandu

    Hi chandu,
    In my previous Organisation we got exactly the same landscape for BW as you described.BCS(BAYER COPSCIENCE LTD) operates a BW System Landscape with one centralized  Global Development System and three regional Quality Assurance and Production Systems located in Europe, Asia Pacific and Americas. This Landscape is to ensure consistent data models to be available in all regional systems as well as to minimize development efforts and make use of respective synergies.
    This is perfectly working  for BCS ,and I think, this is the most approriate way of handling of resources.
    Regards
    CSM Reddy

  • 3 system and 4 system landscape - Charm

    Dear All,
    We have 3 system landsacpe for ECC and 4 System Landscape for BI?
    Is it possible to configure CHaRM for these landscape?
    If yes, please give me step by step guidelines.
    How to create Maintenance Cycle?
    Raj

    Hi Raj,
    This is possible. The three system landscape is the usual scenario. In four system landscap, you just need to add a pre-production system in your landscape.
    Go to the Wiki http://wiki.sdn.sap.com/wiki/display/SM/Weblogs%20related%20to%20Solution%20Manager and search for Change Request Management. There are some 10 docs available there. Specifically have a look on
    First steps to work with Change Request Management scenario
    /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
    Call service.sap.com/rkt-solman. You can find the materials for project prepration, corrections etc.
    Call SPRO in your solman system and go through the documentation provided there.
    This will give you adequate information for configuring ChaRM.
    Rajeev

  • How to creat a Business System and Tech System in SLD for the DB2 DataBase?

    Hi,
    How to creat a Business System and Tech System in SLD for the DB2 DataBase?
    Joseph

    Hi,
    Technical System
    In SLD, click on technical landscape->New Technical System->WebAS ABAP.
    Business System.
    1.Goto Business Landscape->New Business System->Name the business system.
    2. Choose the technical system that needs to be attached->WebAS ABAP->Technical System Name.
    Go Through this links..
    TBIT41:
    https://websmp201.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT41&LANGUAGE=
    TBIT42:
    https://websmp206.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT42&LANGUAGE=
    TBIT43:
    http://www50.sap.com/useducation/curriculum/course.asp?cid=60161651
    TBIT44:
    https://websmp102.sap-ag.de/~form/ehandler?_APP=00200682500000001337&_EVENT=DISPLAY&COURSE=TBIT44
    Also try elearning.
    https://www.sdn.sap.com/irj/sdn/elearn
    Thanks,
    Satya Kumar

  • Cannot create Portal System and Alias in System Landscape in Portal

    hallo all,
    i want to install vc, therefore i need to create an Portal System and Alias.
    this i should do in system landscape in the portal
    (System Admin -> System config -> System landscape )!
    but when i open it, it is loading and loading and nothing happens!
    can someone tell me, what problem that could be?
    ep 7.0 is installed and i want to connect to ERP 2005 ECC 6.0.
    regards Vartan

    Vartan,
    The VC needs a portal in order to run - it needs to borrow the core portal and J2EE functionaliy as the VC components only bring in VC specific applications.
    One question to ask, based upon personal experience, is what browser are you using here please? For instance, I've hit this issue when working from Firefox (1.5 or 2.0) but not when I'm running the same link in IE 6.0.
    Just a thought. Let me know how you do.
    Cheers,
    Tim

  • Smartfroms for portrait and landscape format

    Hi Experts,
    can we able to create a form in two different format (Portrait and landscape) in a smartform. If any one have idea, Please assist me on the issue? if we can, can we able to extend secondary window for next page or not?
    Appreciate your aid in advance.
    Ram.

    Hi Sharin,
    Thank you for your response.
    yes, you right we can use both formats (portrait and land scape) in one smartform. But, here my probelm is when i use two main windows with difrerent main window size (width), the SAP system is not accepting. and even the page break also not working in secondary window.
    I want to display some number of forms with different format (say portrait and land scape). In this case the main window size is different. so how we can achieve solution for this issue.
    if you have any idea, please share with me.
    Thanks for your reply in advance.
    Ram.

  • I have three different listings for Bob Seger on my iPod (bob Seger, Bob Seger System and Bob Seger and The Silver Bullet Band) How can I put all 3 in the same artist folder without changing artist name?

    I have three different listings for Bob Seger on my iPod (Bob Seger, Bob Seger System and Bob Seger and The Silver Bullet Band) How can I put all 3 in the same artist folder without changing artist name?

    Can you just create a new "Playlist", name it Bob Seger and drag what you want into the Playlist.
    File/New Playlist

Maybe you are looking for