System ask for a transport request while maintain IT0002

I'm getting strange message while maintaining IT0002 i.e system ask for a transport request. But while maintaining IT0008 or IT0009 etc it's not asking transport request. So while Diagnosis it is giving
Active integration to Organizational Management means that when a link to Organizational Management is created, it is saved automatically.
When saving organizational data, the data must be written to a transport request because, for example, the automatic transport recording is active. Without a correction request, the relevant changes in Organizational Management cannot be saved.

Check the Tcode OOCR how the swich is active or not
later check with ur basis Guy once

Similar Messages

  • Asking for transport request while table data updation

    Hi All,
    I am trying to update a table TCJ04 using transaction OPS6. When ever I am adding a new entry or edit the existing entry and click SAVE, the table is asking for Transport request number.
    This table carries a master data and should not be asking for transport request. Rather its access has to be controlled by user authorisation.
    Please tell me as to what is the reason of asking for transport request.
    regards,
    Gaurav.

    Hi There,
    It is asking for the transport request for each new entry in the table since the Delivery class in the attributes is set to C( Customizing table, maintenance only by cust., not SAP import ), If it is set to "A" it will not ask for the transport request..
    Try creating a custom table and play around with the Delivery class, A and C, you will come to know the difference.
    Let me know if you need further help in this regard.
    don't 4get to rward pionts if found helpful.
    Thanks-

  • Transport Request while changing InfoPackage

    Hi,
    I have a 2 different info packages on 2 different infosources which are of flat file upload.
    Whenever we want to load the data, we change the file name in the External Data tab of the infopack and schedule to start immediately.
    For one infopackage, system is asking for the transport request whenever I change the source filename but for the other one system doesn't prompt for transport request. It starts loading without any message.
    Can anyone please advise what could be the reason for asking request for one infopack and not for the other one. Is there is any settings ?
    Please advise.
    Thanks
    Ramesh Ganji

    Hi,
    one got transported from development system and is assigned to a development class --> the system puts it into a request.
    the other one is not transported and just a local object --> the system does not need a request to track the changes.
    regards
    Siggi

  • Transport Request while Uploading Documents

    Hi
    We have small problem when some of our users are trying to upload documents in Solution Manager. The system prompts for the Transport Request whenever they are trying.  They have uploaded earlier and did not prompt for any. I checked the scc4 settings and make sure that I h ave selected the correct setting. Is there any way we can disable this option.
    Regards,
    Mahesh Shetty

    Hello
    "They have uploaded earlier and did not prompt for any"
    Are you sure SCC4 settings were not adjusted at that time or for a certain period, it's hard to believe it would suddenly change out of the blue.
    Kind regards
    Tom

  • SAP/System did NOT prompt me for a transport request for ALE BD64 CDM View!

    Hi Experts,
    Am doing ALE setup for sending sales orders IDOC out to a 3rd party system.
    I have created the logical system and attached to a transport. Here we dont have necessity of linking a client to this logical system!
    Then, I created a Distribution Model (CDM) View in BD64 transaction and added Message types to it, but SAP/System did NOT prompt me for a transport request!! Pls. let me know
    1) Is it usual with CDMs creation that NOT prompting for a transport? if so, How my CDM/changes will be moved to QA/Production?
    2) If not, Why system did not prompted me for a transport?
    3) Then How Can I attach my CDM/changes to a transport?
    Thank you

    I don't think we get a TR prompt when adding a view in BD64.
    You've to individually maintain the CDM view in QAS & PROD. Also there is a functionality to "distribute" the CDM view, are you looking for something similar ?

  • Master Data Infopackage asks for a transport

    We loading Master data Texts into an infopackage via a flat file. This is a daily process and it worked fine till yesterday. The current problem is whenever this file is specified and schedule to start the job is specified, it is asking for a transport Number. Nothing in the infopackage has changed. No changes has been made on how the client is set up in SE06/SCC4.
    Any ideas why a data load asking for a transport Number.
    Thks

    Hi Hemal,
    This is which system - production?. I guess then you would need to ask the Super user to create a transport request and add you as one of the users.
    If it is development then follow this link:
    Re: Why infopackage prompts for transportable request?
    Bye
    Dinesh

  • Tcode to look for a transport request number

    Hi all,
    I have to look for request number details .I dont have access to SE01 . How can i look that details?

    Hello Priya
    The standard transaction for finding transport requests is <b>SE03 </b>(choose option <i>Requests/Tasks -> Find Request</i>).
    If you are not authorized to call this transaction try to execute the underlying report <b>RSWBOSSR </b>using transaction <b>SA38 </b>(menu <i>System -> Services -> Reporting</i>).
    Regards
      Uwe

  • Program for Importing Transport Request

    Dear all,
    I am thinking of writing a program to perform the import of transport request into the system after the transport request is added to the buffer.
    The transport request is added to the buffer using FTP.
    Please kindly give me some guidance as to how can I write this program for importing transport request. Thank you.

    Hi Prashant,
    My 2 systems are not linked to each other, one is running SAP 4.7 and the other is running ECC6.0. Can I still use STMS_IMPORT?
    When I use STMS_IMPORT, I hit some errors. It is either "tp finished: A tool used by tp broke down" or "tp finished: A tool used by tp aborted". DO you have any idea what is wrong? Thanks for your help.

  • How to find the source and target systems of an imported Transport Request?

    Hello,
    How to find the source and target systems of an imported Transport Request?
    chinna.

    Hi Chinna,
    In your landscape the TMS must have configured.Let assume that you have four six systems in the land scape.
    DEV->DEV1->QUA->PRD and other two systems (TR1 ,TR2)are at different domain amd both are connected to QUA and the requests are forwarded from there.Here normally the flow willl be from DEV to DEV1, then DEV1 to QUA and QUA to PRD.For other two systems (TR1 ,TR2 )the source system will always be QUA.
    Regards
    Ashok

  • F4 help for Customizing Transport Request Field....

    Hi,
    I need a Function Module for F4 help for Customizing Transport Request field. I have used the below FM but I ma able to get only Customizing TR for only Login User Name only but not other Users. How to get the Customizing TR which are created by other Users(Owner is diferent from Login Owner).
    PARAMETERS: p_cts  TYPE e070-trkorr OBLIGATORY.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_cts.
      PERFORM get_cts CHANGING p_cts.
    *&      Form  get_cts
    FORM get_cts  CHANGING p_cts.
      TYPE-POOLS trwbo.
      DATA: lv_cts TYPE trwbo_request_header.
    To Get only custimzing requests
      CALL FUNCTION 'TR_REQUEST_CHOICE'
        EXPORTING
          iv_request_types     = 'W'
        IMPORTING
          es_request           = lv_cts
        EXCEPTIONS
          invalid_request      = 1
          invalid_request_type = 2
          user_not_owner       = 3
          no_objects_appended  = 4
          enqueue_error        = 5
          cancelled_by_user    = 6
          recursive_call       = 7
          OTHERS               = 8.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
        CALL FUNCTION 'POPUP_DISPLAY_MESSAGE'
          EXPORTING
            titel = 'Transport'
            msgid = sy-msgid
            msgty = sy-msgty
            msgno = sy-msgno
            msgv1 = sy-msgv1
            msgv2 = sy-msgv2
            msgv3 = sy-msgv3
            msgv4 = sy-msgv4.
      ENDIF.
    Pass the selected TR to selection screen
      IF sy-subrc = 0.
        MOVE lv_cts-trkorr TO p_cts.
      ENDIF.
    ENDFORM.                    " get_cts
    Regards,
    Deepthi.

    Instead of using FM 'TR_REQUEST_CHOICE', you can have direct database select on table E070 and E071.
    In E070, the field TRFUNCTION determine the customizing and workbench request.
    K->     Workbench Request
    W->     Customizing Request

  • Portal asking for Login details again while executing the reports

    Hi Team,
    Our Portal is asking for Login details again while executing the reports individually.
    The issue is the if i enter the same PORTAL Login credentials, its showing as Authentication failed.
    PLEASE ADVICE ASAP.
    thanks & regards
    Sneha

    Hi Kiran,
    I have recently taken up this portal.. so not clear on the structure.
    however, I observed there was no user mapping available.. so i added the same with my login credentials..
    stil the issue persists.
    Please advice.
    Sneha

  • Asking for purchasing reqistioner no. while making production order

    dear all
    asking for purchasing reqistioner no. while making production order.how do get rid of this reqisitioner no. option from production order.
    regards
    manish sharma

    Hi,
    Chcek the BOM copied to the order or the items that you are entering while creating the order, if item categories are N, purchse requisitions are automatically created and related info is queried from the user. Change item categories to L, stock items if external procurement is not relevant.

  • HT3775 I can not open a video movie clip, the system ask for a codec, how can a set up that automatlicly

    I can not open a video movie clip, the system ask for a codec, how can a set up automatlicly?

    The problem was resolved a small manipulation - on stage Basic Configuration,
    point 3 "Configure CA Introscope"
    I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
    Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
    Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly

  • When i open open illustrator he asks for a serial code, while i have the creative cloud package. How can i change this?

    when i open open illustrator he asks for a serial code, while i have the creative cloud package. How can i change this?

    marijvelt,
    Please contact your IT admin to get the product licensed.
    If you still face the issue. Please drop me a mail @[email protected]
    -Pragya

  • Redeeming credit for iTunes store from gift card. system asking for security code and gift card thrown away.

    Redeeming credit from gift card for itunes. System asking for securitity code and gift card is thrown away.

    On the main iTunes store screen, click on Redeem on the right side.
    Put in the card number.
    It will ask to *Create new account* or *Use existing account*.
    If you do not have an account, select *Create new account*.
    You don't have to enter in a CC number. You cna if you want but it's not required.

Maybe you are looking for

  • Problem with Ultrabeat and Bounce in Place

    Hi, I'm new here and reasonably new to Logic as I have been an Ableton user for quite a few years. I was eventually enticed by Logic Express 9 due to the fantastic price and the features on offer. Anyway on to my problem! I have been getting my head

  • Apps will not update in iTunes

    Recently bought new laptop w/Windows 7 (Win7 required for work.)  Downloaded/installed latest ver of iTunes to sync my iPhone 4S and iPad. I can update apps in iTunes but they will not update on devices during sync. On the device menu in iTunes I can

  • How to delete pages in a pdf file with mac OSX Mavericks?

    Indeed i don't have Pages options in my tools window... Is that normal for the mac version? Please it's urgent...

  • I have numbers on mac mini and need to email as an attachment  one sheet instead of the 30. Can this be done

    Can anyone help please. I have just downloads the numbers app. I have a very large document of which i need to send a separate sheet each week as an attachment via email. Can this be done?. Sadly, I am used to Neo and that was rather easy to do.   I

  • W500 missing drivers... AGAIN!

    Hi, i formatted my W500 w7 x64 at least 4-5 times in the past 2 years, and every time i used a link here to download the missing drivers and everything was working fine. But not this time, i can't figure out why and i've tried several alternative sol