System ask for recursive BOM

To SAP GURU,
I have 1 problem in master ecipre .I have halb( SFG-1 ) which is having 2 halbs ( SFG-2 & SFG-3 ). Again this 2 halb is having their multilevel bom .respectvely .SFG-2 is having co product ( Co po -1 ) which is again input in SFG-1 .
Now when i am saving recipe of SFG-1 system ask me that SFG-2 mat code is recursive & for also co product system ask me about recursive .Now unless & untill i will click on recursive allowed system dont allow me to save the recipe .Even if i saved recipe by clicking on recursive allowed in mrp run system not explode the BOM of SFG-2 .
Only when header material is used in bom compnent then only bom will be recursive but in my case even if i have not used header material in any of my bom component still system ask me abaut recursive ..So can u tell me is i am missing some where or some solution is their Now i am trying to solvr it by SAP notwes 161742.( Or any latest SAP note is available )
Please tell me is their any valid solution .
SANIL

Sanil,
what ever you mentioned is true , the only problem you are facing error is related to BOM level.
SFG-2 and its co product ( Co po -1 ) you are putting in same BOM level ( ie in the BOM of SFG-1 )thats why you are getting this error.
as Co Po-1 will be produced after the production of SFG-2 so it can be at lower level where SFG-2 is maintained.
Think on it , its logiocaly correct , your co product can be produced before your main product.
Check out and revert back.
Regards
Ritesh

Similar Messages

Batch derivation for recursive bom

hello,
anybody please help me. when iam doing batch derivation for recursive BOM its not working. my recipent batch no is alo coming in sender batch no. its doing deling between sender batch no and recipent batch no. how can i solve this issue.
thanks and regards
bhakta.

Hi Bhakta,
Bigger problem in your case is not multiple Batches of RM but more then one Batch No. of Header Material in single production Order.I guess in your case Batch No. are triggered at the time of GR and not in Production Order at the time of Release.Correct?
But up to my knowledge Batch Derivation is triggered at the time of Batch Creation in Production order.For which you have to first carried out Batch Derivation of sender Material.But in your cases the scenario is totally different due to Batch is created at the time of GR.So Difficult one and can be possible if you go with 1 Batch for 1 prod. order.
Regards,
Dhaval

HT3775 I can not open a video movie clip, the system ask for a codec, how can a set up that automatlicly

I can not open a video movie clip, the system ask for a codec, how can a set up automatlicly?

The problem was resolved a small manipulation - on stage Basic Configuration,
point 3 "Configure CA Introscope"
I forgot to add to the list of CA Introscope Enterprise Managers link to my manager.
Thus it is necessary to take into account that the path should be correct (usually for linux - /usr/sap/ccms/apmintroscope) and the directory should be applied appropriate privileges.
Then in paragraph "Byte Code Adapter Installation" - there are all the necessary data, and it starts to work correctly

System ask for a transport request while maintain IT0002

I'm getting strange message while maintaining IT0002 i.e system ask for a transport request. But while maintaining IT0008 or IT0009 etc it's not asking transport request. So while Diagnosis it is giving
Active integration to Organizational Management means that when a link to Organizational Management is created, it is saved automatically.
When saving organizational data, the data must be written to a transport request because, for example, the automatic transport recording is active. Without a correction request, the relevant changes in Organizational Management cannot be saved.

Check the Tcode OOCR how the swich is active or not
later check with ur basis Guy once

Redeeming credit for iTunes store from gift card. system asking for security code and gift card thrown away.

Redeeming credit from gift card for itunes. System asking for securitity code and gift card is thrown away.

On the main iTunes store screen, click on Redeem on the right side.
Put in the card number.
It will ask to *Create new account* or *Use existing account*.
If you do not have an account, select *Create new account*.
You don't have to enter in a CC number. You cna if you want but it's not required.

System asking for storage location in case of Asset GR,

dear all,
In our case system is asking for Storage Location in case of Asset GR, though PO was account assigned.
I checked for the screen setting, but not getting any clue where to find that entry to make depressed.
Pls guide,
Regards.

Hi,
Are u using material code for assets or its a text based purchase, if material code is there (although non valuated / qty managed) it will still require sloc as system needs to store the qty in stock
Reg
dheeraj

The system ask for keychain password every few minutes

hi, if somebody can help me, please. The system ask me for a keychain password every few minutes, what i need to do?

Hello Mduque45
Try repairing or resetting your Keychain by following the steps in the article below to resolve the issue with the repeated prompts to enter in the password.
Resetting your keychain in Mac OS X
http://support.apple.com/kb/ts1544
Regards,
-Norm G.

Help: system asking for subscription or credit, bu...

system is asking for a subscription or to buy credit. I have already paid for a 3 month subscription
This post was transferred from its previous location to create its own new topic here; its subject and/or title has been edited to differentiate the post from other inquiries and to reflect the post's content. A link to this post appears where the post was originally added.

Hi Rachel,
Please refer to the following link http://forums.adobe.com/message/6009549#6009549
Regards,
Aish

System Asks for password

Hello,
I'm running Mavericks and the system asks me for password to weather creating or deleting a folder on the top level of the HD.
That doesn't happen on the desktop or user folder or any other drive, only inside of the the HD main level.
I got info of the HD and it does not have my user name listed. I went to the user account preferences and my user name is listed as administrator.
Is this a normal? I have repaired permissions and used the terminal to reset ACL for my user name.
Thanks in advance

Normal. You shouldn't use that area for file storage. Use your home folder or the Shared folder in Users.

Cannot replicate a datasource in BW, System asks for deletion

Hi All,
When I ask for "Replicate Datasources" in our BW system after an upgrade of R/3, it displays the "Deletion of Datasources" window specifying if we would want to delete the datasource since it cannot be replicated.
In what circumstances, do we get this message ?
Is that because BW is seeing new datasources in R/3 which has not been activated ? Then, why would the BW see the new datasources even if they are not active.
Is it safe to say YES to delete all the datasources that cannot be replicated ?
Thanks,
Alain

Hi Alain,
as explained in the OSS Note 589361 'Deleting DataSources in BW during replication',
"DataSources that cannot be found (perhaps only temporarily) when a certain component is being replicated are considered obsolete and are deleted...".
So, probably your upgrade process in R/3 deleted some datasource in your source system (no longer in use or no more supported or no more active and available only in D version...).
Try to verify that every datasource used by you is still in RSA6 in R/3...then click YES, I think with no problem...
Hope it helps!
Bye,
ROberto
...and please don't forget to reward the answers...it's THE way to say thanks here !

Materials planning for Recursive BOM during MRP run

SAP Guru's,
We developed an recursive BOM as per production requirments , but we didn't know the impact of this recursive BOM during MRP run.
Pls help us how to recursive bom behaves during MRP.
Thanks & Regards
Suresh Babu.S
Bangalore

Hi,
This message was sent to us by SAP when we were having the same kind of requirement. Hope it will help you too.
Usage Probability
Material requirements planning (MRP) plans the alternative items according to usage probability.
If you use the usage probability to determine the withdrawal posting (strategy 1), the quantities are proposed according to the usage probability. You can change the proposed quantities.
An alternative item is only planned if the usage probability is at least 1%.
If the usage probability is 0%, a dependent requirement with quantity
0 is generated for the material.
The component with the quantity 0 is displayed in the planned order.
If required you can increase the quantity there.
It is possible to plan too much for alternative items, because you can enter usage probabilities that add up to more than 100%.
Hope it will help you.
Regards,
Alok Tiwari

[Solved] System asks for encryption password multiple times

Hey guys,
I have following problem:
I am using dmcrypt for encryption of my hard drive but it seems like I have made a mistake when I installed it. But for the most time I ignored it.
When I start my system it ask for the encryption password normally. The strange thing is that it also asks for the Password when services start.
If I issue a command with systemctl start XXX I also get following message:
Please enter passphrase for disk Crucial_CTXXXXXSSD1 (lukslvm)
There is no problem if I just press Enter and go on actually but this still bugs me.
I wonder what I did wrong at that time.
Edit:
/etc/crypttab:
lukslvm UUID=xxxxxxxxxxx------xxxxxxxxxx none luks
lvm pvscan:
PV /dev/mapper/vgarch VG vgarch lvm2 [223,38 GiB / 0 free]
Total: 1 [223,38 GiB] / in use: 1 [223,38 GiB] / in no VG: 0 [0 ]
Last edited by Erhan (2014-12-17 12:45:53)

Fixed by removing the entry in /etc/crypttab
I don't even remember adding it there but it has been already some years.

System asking for permission for incoming connections

When I restart my computer I get messages that ask if I want to allow incoming connections to programs such as qmaster and realplayer. I allow this. The message also says that I can change this in the firewall pane in system preferences. When I go there I see that both already allow incoming connections.
Why is the system asking me each time when I've already said that it is allowed?

I had the same problem for iTunes, Connect360 and Transmission. After reading many forum post and trying many things to no end this is what worked for me.
NOTE THIS WORKED FOR ME, IT MAY NOT WORK FOR YOU, DON'T BLAME ME.
1. Log into an Admin account
2. Go to the Firewall under the Security Pane in System Preferences and remove ALL programs listed under "Set access for specific services and applications." (you can try removing just the troublesome apps)
3. Still in the Firewall tab, change setting to "Allow all incoming connections."
4. In the Finder go to your Applications Folder and drag iTunes (or any other offending apps) to the trash and delete from the dock. *This SHOULD NOT delete your music, playlists, ratings or anything else, it did not on mine. But BACKUP if you want to be 100% sure*
5. In the System Preferences, go to Accounts > Login Items and remove ItunesHelper.
6. Restart your mac and log in as the Admin again.
7. Download any apps you deleted, i.e. iTunes. Link: http://www.apple.com/itunes/download/
8. Install the apps (don't open them after install)
9. Go back into the firewall settings and change it back to "Set access for specific services and applications."
10. Open iTunes and any other apps you reinstalled.
11. Add iTunes back to the Dock.
This should have fixed the problem, and iTunes should act like nothing ever happened...
We still need to add iTunesHelper back to the Login Items.
12. In the finder go to Applications, and right-click on iTunes, select "Show Package Contents.
13.Open the System Preferences and go to Login Items under Accounts.
14. Back in the finder (the iTunes Package Contents) go to Contents>Resources>iTunesHelper
15. Drag iTunesHelper into the Login Items list.
This worked for me. I don't think it ever asked for permission for iTunes. And I have only been asked once for the other programs that used to ask me everytime.
Hope this helps you and everyone else with this problem.

Apple ID enter in, but the system ask for the itunes support?

Everything I already done, but the system ask me for the itunes support?

Click here and ask the iTunes Store staff for assistance.
(104855)

While creating process order system asking for a.c assighnment

While creation of process order system is asking for Account assighnment sales order
pls suggest how to avoid this.

Dear,
Maintain following by given root,
Go to SPRO>IMG>SD>BASIC FUNCTIONS>ACCOUNT ASSIGNMENT/COSTING >MAINTAIN REQUIREMENT CLASSES FOR COSTING / ACCOUNT ASSIGNMENT
Here you can maintain the Req. Class with Account Assignment Category wrt Costing.
Regards
Ajit k Singh
happy to help u

System ask for recursive BOM

Similar Messages

Maybe you are looking for