System authentication wifi - gid and uid settings
I have a long standing problem with System Authentication on WEP Enterprise wifi.
Authentication worked yesterday but not today (see screenshots). I see in Directory Utility that I can make uid and gid static but not sure what that means. Is there any one who understands how System Authentication in 802.1x works along with OS X's integration of active directory?
You can setup "locations" in network preferences. I have a Macbook and I have setup a "home wifi" setting and a "cafe" setting.
My "home" setting allows me to use a user set IP address with pre-set dns servers and my "cafe" setting allows dhcp IP settings given by the router.
Good Luck
Similar Messages
-
Did all these things mentioned in this article, even did a system reset including erase data and other settings. iOS is up to date, still the iPad 2 display is not rotating.
This happened first a couple of weeks before, then I did a reset and it worked. Then after 2-3 days it happened again, I updated the iOS and it worked after that. Next time it happened, I tried all possible methods, including switching to software - rotation lock on/off. The hardware when turns to off/on, shows the correct icon on the screen of the lock and unlocked state. But the rotation is not happening.Just check again.
If you see a lock icon in the upper right corner of the screen - then the screen orientation is locked.
Try the side switch above the volume rocker first and see if that unlocks the screen. If that doesn't do it, double tap the home button and swipe to the right and look for the lock icon all the way to the left.
If the screen is unlocked but still will not rotate, reset the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
If the iPad screen still will not rotate - turn it over and gently tap it on the back a couple of times - but gently tap it. Make sure that the screen is protected. -
I have built packages for INN, a news server capable of being a private server with only a few groups, to a massive server running thousands fo groups, which seem to have a bit of a problem with what UID and GID the news user and group has.
The only news server that is an official package is sn which uses a UID of 9 and a GID of 13.
Is there an official place to lookup sub 500 UID's and GID's, and or register them for news or indeed any other user?Hi Mohan,
On linux systems you cannot bind to ports lower than 1025 unless you are a privileged user (AKA root). On the other hand, you don't want to run a lon-running process like weblogic as a root user.
So the solution is to start up weblogic as privileged user, bind to low port numbers (usually 80 for HTTP, 161 for SNMP and such) and then weblogic itself changes the user that runs it's process to a low-privilege user such as "nobody" or a dedicated user you create.
Anywhere in this post "user" can be substituted for "group".
Hope I explained well,
Eli -
How do I transfer my MacBook Air to my wife so she can sync her iTunes account and other settings with her iPad Mini?
You can change the account shortname to whatever you wish to use.
As you can see from my example above. Once you click on the Create User button a new account will be created.
She will need to get her own Apple ID setup so when she starts with iTunes she can open her own iTunes account unless you both want to share the use of the same Apple ID. This can create a bit of confusion if you have your own iPads or iPhones or iPods. As you have discovered it's pretty much one iDevice with one Apple ID.
As for the iTunes library that becomes a more complicated issue. -
I just set up mine and my wife's iphone 4 on new ios5 and icloud settings. I have both phones on one account and actually she purchases apps/music with my sign in and password on her phone.
Now that we are set up on icloud settings, her phone is receiving my calendars, contacts, etc. she does not want and does not need any of these items on her phone. How can I separate the two now? is there a way to have a different login and password for her phone so that it sets up on its own icloud settings?
ThanksShe should create her own Apple ID and start using it for everything, including purchasing.
It starts on the computer in iTunes. There are 2 elements we are dealing with;
purchasing items from iTunes (apps, music) and playing items in iTunes.
Only one Apple ID can be signed in at a time for purchasing. But you can "authorize" multiple Apple IDs for playing. As long as iTunes is "authorized" with both your Apple IDs, items purchased with these different accounts can coexhist in one iTunes Library.
Why this is important, it has to do with back up and being able to transfer purchased items to the computer.
Once your wife sets up her own account, she will want to connect the iPhone to the computer to back it up and transfer any new purchases, iTunes will need to be authorized for that to happen.
With that said, a new feature of iColud is back up. It will back up everything to the cloud. You need to turn it on, it's at the bottom of the iCloud settings on the iPhone. It is limited to 5GB for free, you can buy more. I used all 5GB my first back up, but I have a lot of crap, and there's a lot of things on the iPhone that get backed up that don't count against the 5GB, so it might be plenty of space for you.
When it comes to the iCloud and contacts/calendars, again your wife needs her own account. (ASAP) Does she have a computer in her life that has a list of her contacts and calendars. I hope so, because it sounds like her contacts on her iPhone are now mixed with yours. Or I hope there is still an untouched list of contacts on the iPhone that iCloud didn't mix. Either way Delete your iCloud account from her iPhone. Remove the data, as long as it isn't hers. This will delete all info being synced to the cloud. If she still has a list of her old contacts on the iPhone, great. If not, I hope she has them somewhere else, like her own computer.
Create her an iCloud account. Enter the account info where ever there is a list of contacts/calendars and get the info onto the cloud, then add the iCloud settings to any other devices.
Any new apps/music purchased with her account will back up to the cloud. I don't think apps purchased with your account will. She will also need to enter your password for updating these apps, because they were purchased with your account.
I hope this helped and didn't make thing more confusing. Good luck! -
The Creative Cloud application becomes inoperable continually on both my Windows 7 and 8.1 operating systems. I'm tired of re installing the application after deleting the OOBE file to get updates and syn settings between computers for Photoshop. Is this an endemic problem with others? I'm using Google Chrome as my browser. Is this an issue with the problem?
Similar problem just happened to me with the Creative Cloud Update 1.7.1.418—slightly different so I thought I'd share. I have multiple Adobe Creative Cloud programs installed on my computer, all working just fine. I updated the Cloud App to the latest version and then it shows me that I have only one program installed! All my previously installed programs (Photoshop and the like) still work but show as "install" instead of "Up to date". Initially I thought I'd have to re-install the Cloud app or recreate the OPM data base but then I noticed that some of the Cloud app preferences (Apps > Settings > App Language) were different to what I had set previously. I use English (International) language, the update had reverted the app back to English (North American). I flicked back to my previous language and bam, all my apps now show as being installed correctly.
-
Hi. My wifi keeps disconnecting. I keep turning the wifi on and off in settings but will disconnect again after a minute or so. I use an ipad2 and my ios is updated. How to troubleshoot? - kay peralta
Is this happening with one particular network or with all? Make sure iOS is updated on the device.
Try this:
Reboot ipad by pressing and holding both the home and sleep/wake buttons at the same time until the apple logo appears on the screen, then let go. Then try to connect to network.
Go to settings, Toggle airplane mode on/off. Make sure bluetooth is off. Turn on wif (airplane mode off). Try to connect.
Reset Network Settings
Go to settings/general/reset/reset network settings. Then try to connect to network.
If its your home router, then reboot router by unplugging for 5-10min. (do this while you're resetting network settings).
If problem persists, then check for firmware updates on your router.(you check router manufacturer support website for downloads and instructions). -
this has been happening frequently lately. when I look in settings it says that my ipad is already connected to my home wifi, but I can't get on anything that uses it. I'm am not good with this stuff as it is all new to me, so any help would be appreciated..thanks
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
iOS 6 Wifi Problems/Fixes
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I seem to have lost carrier settings on my iPad1,I've tried a restore and update but get a message about the original sim card,which I still have but is inactive,really inconvenient as I can only use in wifi spots and off line mode,please help,sibear.
You might want to download something called an undelete utility. These can find files and recover them even after they appear to have been lost. There are some undelete utility programs that are free. Look at tucows.com
Also, it appears that you have POSSIBLY overwritten the actual files, which you moved manually, with I don't know what, which you moved in PSE's folder location view.
Next, in the future ... NEVER (that's: don't even think about it) move your photos in Windows. NEVER. NEVER. Not ever. Not once. This always (that's ALWAYS, as in 100% of the time) causes problems and usually makes things difficult to fix.
Lastly ... make regular backups! I must say this in the forums about seventy bazillion times a month. Make regular backups! Regular depends on how often you take photographs and edit them. Since my photographic activity usually happens on the weekends, I make backups every Sunday night. You may need a different schedule, depending on your activity level. MAKE REGULAR BACKUPS! -
Apple TV only showing trying to change date and time. I have recently changed to a new wifi provider and need to change the settings in tha ATV box.
Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
OID and Solaris/Unix system authentication
Does anyone have any experiences with using OID as a SSO solution for unix system authentication/authorization. I'm looking at using pam_ldap, but didn't know if Oracle had an alternate suggested implementation? Any help/pointers are appreciated.
Thanks,
--MarkFigured out that you need to run the following to have the DB subscribe to a policy in OID:
sa_policy_admin.policy_subscribe('POLICY_NAME');
this adds the dn of the DB to the uniquemember attribute of the POLICY_NAME entry in OID. Once I did this, I could add the policy to DB objects.
I also discovered that when you create a profile in OID, the olsadmintool documentation is not corrrect. When you create the minimum write label, do NOT include any compartments or groups in the definition. The only valid item in this label is LEVEL. Once I recreated my profiles with a valid min write label, everything seems to work ok.
I am having issues with updating a Profile definition in OID and seeing the corresponding update reflected in the DB SA$PROFILES and SA$USER* tables. -
I am using my iPhone 4s personal hotspot as the internet router for my notebook. However, I am gtting the WEB SITE IS BLOCKED BY NETGEAR FIREWALL. I've deleted some other wifi connections I had before, had system restores, clear caches and cookie. Still, I failed. Whenever I tried to access FACEBOOK, it's still blocked so I still had to use https:// or tl-gp. please help asap.
Well, aren't you all that and a bag of chips!!!!
Oh what a relief! What a RELIEF!
That just cleaned up my life. And Cranky Boy is actually smiling!!!
Houston, we've got dots AND BARS!!!
P.S. All my firware and software are always current. If I spent as much time looking for a reset button as I spend checking for software updates, I mighta not needed to work at this!!!!
P.P.S. Airport Utility shows Cranky Boy's iPad as the Airport Express' Wireless Client!!! Who knew?
Thank you so much, m'Lord. I am in your debt. What would you have me do?
Patti in Tucson AZ -
My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!
My WiFi on my iPad has been getting poorer recently, and two days ago stopped working completely. I have reset the network settings, and when that didn't work I restored my iPad. I still cannot find or access WiFi networks, and if I do, it fails. Help!!
-
My ipad mini refuses to join home wifi connection. It is trying to do so continuously but with no success. I tried to reset all settings. Switched wifi off and then back on. Nothing works. The rest of devices are fine with the wifi. What shall I do next?
Maybe reboot your router. Unplug it for about 30 seconds or so and then plug it back in. Reboot your iPad while the router is powering up.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
iPhone 4s won't connect to any wifi, have tried every restart, reset and update. The signal just got weaker and stopped altogether. The wifi address box in settings / about says N/A. Any ideas?
Hi there montypony24,
You may find the troubleshooting steps in the article below helpful.
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
-Griff W.
Maybe you are looking for
-
Dear All, I am facing a problem while doing the transaction variant. It is as follows - With the T.Code SHD0, i started creating a transaction variant and named as ZMM01 for the transaction MM01. After clicking the create(F5), it went to the MM01 tra
-
How do I preview my video in Motion?
I'd like to see it without all the distractions
-
XI error Cannot read Pool-Stamp. /Connection is invalid.
Please assist. These problems seems to be related and are occuring intermitantly on our XI system. Here are the details: Connection is invalid. Thrown: MESSAGE ID: com.sap.aii.utilxi.misc.api.ResourceException com.sap.aii.utilxi.misc.api.ResourceExce
-
Backup exchange 2010 done, unloading medium... but never finish
Hi all, I'm using Data Protector 07.00 to backup exchange 2010 (with DAG), everything was fine but then exchange full backup has done DP unloading medium then never finish, other jobs will be backed up normal except the exchange will be failed on nex
-
IBM ThinkPad 390 2626 HDD volume limit
What is maximum HDD capacity for IBM ThinkPad 390 2626? Can I use 30 GB Toshiba MK3021GAS HDD with my 390?