System availability in process industry

Hello
We are a chimical industry (process) and we use R/3 to support the manufacture process (labratory, PP ,QM).
our system protected in HA cluster, and stable. but we know that OFFLINE maintanaces window is needed (for DB upgrade, SAP upgrade and so.) this could be few hours a year...
How do you support your manufacture while SAP is down?
Erez

Important Things Involved:
O10C --- Control Recepie Destination (Clubbing of recurring PICs)
O12C --- Process Instruction Category (PICs) -- Clubbing of Process Instruction Chars to be displayed
as per requirement on PI Sheet.
O13C --- Process Message Category --- After we have recorded the Enteries in PI sheet, If we need to update some ABAP/ Z table or We need to Trigger some program with those values then mapping for that is done here.
BOM:CS01
Resource:CRC1
Master Receipe:C201
Production Version:C223
PI Characteristics:Ct04/O25C
PP Process Flow:Cr01>Co53>co60/co55/co64/co67-->CO57
SOP:MC84>MC81>mc76>mc75>md63
Demand Management: MD61>MD02>MD04-->Cor1
MRP Run: MD02,MD04

Similar Messages

System call failed. Error 1816 (Not enough quota is available to process)

Hello All,
I am trying to install NW 7.1 CE EHP1 using Windows 2003 server and MSSQL2005.
During the installation at INSTALL JAVA ENGINE phase i got below error
TRACE 2011-10-22 03:37:46.490 [synxc_security.cpp: 195]
Sywindows :: setDacl (HANDLE hobject, St_OBJECT_TYPE_ObjecType, ATL :: CDacl & rDacl,DWORD dwInheritanceFlowControl /"=0"
Syslib info about system call. os message 1816 (Not enough quota is available to process this command.)
Please let me know do i need to increase the size of the paging file? If yes, then how to proceed once the page file has been increased?
If the cause is some other factor, kindly tell me the solution to it as well.
Much appreciate your help
Thanks
Prabhjot
Edited by: PRABHJOT SINGH on Oct 24, 2011 11:35 PM

Hi,
Maybe a paging issue:
http://msdn.microsoft.com/en-us/library/ms820778.aspx
To increase page file:
http://www.petri.co.il/pagefile_optimization.htm
My computer -> rt click -> Properties -> Advanced -> Performance -> Settings -> Advanced -> Virtual memory change.
But you will need a restart as suggested by DatabaseSAP above.
Regards,
Srikishan

Report Builder 3.0 - Not enough storage is available to process this command

I have a customer who uses Report Builder to create adhoc reports against a SQL data warehouse. However, users intermittently encounter the exception "Not enough storage is available to process this command", which appears to relate
to creating/drawing the report.
It would appear that a user can define the required Report SQL, run the report and export it to Excel. However, on occasions, when the user reviews/amends the report SQL, or specify a new value for a existing report parameter, and then try to run the
report, they get an exception, as per the snippet below:-
System.ComponentModel.Win32Exception: Not enough storage is available to process this command
at System.Drawing.BufferedGraphicsContext.CreateCompatibleDIB(IntPtr hdc, IntPtr hpal, Int32 ulWidth, Int32 ulHeight, IntPtr& ppvBits)
at System.Drawing.BufferedGraphicsContext.CreateBuffer(IntPtr src, Int32 offsetX, Int32 offsetY, Int32 width, Int32 height).
The error can also occur after trying to re-export the report to excel. In this case the export works.
In all cases, the user is given the option to continue or quit, but clicking continue just causes the error to be re-displayed so the user has to quit Report Builder and re-open it..
We have monitored the user's resources (citrix session) and they are not using all their RAM or temporary folder space.

Hi jocelyn,
As per my understanding, you got the error on occasions when you change the parameters to run the report, export it to excel or preview the report, right?
Did your report have large amount of rows or columns or did you have image or chart in the report? Did this issue happened on the other reports too?
Your issue can be caused by many factors:
If you have some image or chart in the report. Based on the callstack crashing at System.Drawing, it looks like GDI+ may be a problem. Make sure you have the latest updates installed for GDI+. The interaction of the content of the report with GDI+
may also be something to investigate. If you have many images in the report, each image is a distinct GDI object and could potentially cause a problem.
It also probably running out of space on your computer, so you may need to check the space on your c: drive. If you are running out space, you can try to reboot the computer or delete a few things or somehow getting a bigger hard drive to check the
issue again.
If the issue only happend on this report, I recommend you to recreate an same report to have a test.
Similar thread below for your reference:
SharePoint 2010 SSRS Integrated - Report Hangs and crashes
System.ComponentModel.Win32Exception: Not enough storage
is available to process this command
Not enough storage is available to complete this operation
If your issue still exists, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

Control recipe destination not available in Process order

Hi PP-PI Gurus,
When i am sending the process maessages to destinations,i am getting the error"No control receipe destination available in process order".
When we create master recipe using X-steps, there is no option to enter comtrol recipe destination. Infact we asssign the destination in X-step tree.
When the control recipe is created for a process order using x-steps, the operations overview will not have the control recipe destination.
When the status of the control recipe is sent to destination(PI02),the system throws the above error.
Any help on how to resolve this error.
Thanks in advance.
Mani

Hi Dhavel,
Whether it is PI_CRST or PI_CRST2 i am getting the same error message.
When i am working with Conventional Characterestics based process instructions in my recipe, everything is working fine.
When i use X-steps instead of process instructions in master recipe to create the control recipe, i am facing this error.
So it is clear that , when we are using Execution steps(X-steps) to create PI sheet,there needs some extra settings.
Any body working with X-steps in process order ,request your help please to resolve this issue.
Mani.

Win 7 Pro x64 Error 0x8007046a: Not enough server storage is available to process this command.

I installed Win 7 Pro x64 on a reasonably decent machine (Nvidia nForce 680i SLI, core 2 duo, 4 gig ram). It was a clean install on a freshly formatted partition. While copying a large bunch of files from another machine on the LAN, I get "Error 0x8007046a: Not enough server storage is available to process this command." It does give me the option to retry and continue, but the error inevitably pops up again later during the copy. Googling the error, I found a reference to it, suggesting I go to the registry and increase the IRPStackSize (but this article was not specific to Win 7). I tried increasing it as high as 32 hex. This reduces the frequency of the error, but does not eliminate it completely. Also, I now see a new error sometimes that says, "Too many files are currently in use. Quit one or more programs and then try again." That's odd, because I don't have anything else running. I haven't seen these errors when copying files to different partitions on the machine, so I assume it's something to do with network.

Hi,
To troubleshoot the issue, please try to do an In-Place Upgrade to repair the system.
1. Start the computer by using the current Operating System.
2. Insert the Windows 7 DVD in the computer's DVD drive.
3. Use one of the following procedures, as appropriate:
If Windows automatically detects the DVD, the Install now screen appears. Click Install now.
If Windows does not automatically detect the DVD, follow these steps:
a. Click the Start Button, type Drive:\setup.exe in the start search box and then click OK.
Note: Drive is the drive letter of the computer's DVD drive.
b. Click Install now.
4. When you reach the "Which type of installation do you want?" screen, click Upgrade to upgrade the current operating system to Windows 7.
Thanks,
Novak

Difference between Business service, Business system and Business process

Hi,
Can anyone tell me the difference between Business service, Business system and Business process?
Thanks,
Harikumar. S

Hi,
Business system
It is a logical system from a business point of view.
One or more logical systems that belong together from a business point of view is called a group of Business system group. A business system group represents a unit within a company or organization that can be defined according to legal, economic, administrative or geographic factors.
The objects in a business system group are uniquely identified by a uniform numbering system.
Business process
Business procedure within an enterprise that uses resources and can involve activites from a number of different cost centers in a controlling area.
When executing a business process, activities can be utilized for several cost centers of a controlling area.
Business service
Its a third party system.
All these belong to a Business Scenario which is
Description of the flow of business processes according to a business typology. A business scenario represents a template for a business process, which runs within a particular area of a company process. All processes required to completely process the task are listed in chronological order in the scenario. Business scenarios can be described graphically, in either aggregated or detailed form (EPC). Example: Direct sale to industrial recipient
**DO REWARD POINTS IF THIS IS HELPFUL FOR YOU**
Regards
AK

Use of QM in Process Industry

Hi,
QM Expert ,I am from automobile sector, I want to know the detail requrement of SAP QM in process industry,as per my knowedge only shelf life scenario is different other than all processes of QM ,please give the detail Scenario of relating QM in process industry in detail
Regards
Aditya

hi
QM in process industry can have a significant difference from Normal Automobile or Production system.
It can be
1.Batch manegment can form significant part of Process Industry.
2.Recurring inspection is also huge part of Process Industry
3.Inspection points along with sample drawing procedure in Inspection planning can be used in process industry.
4.Shelf life material as you mensioned is significant.-->stability study
5.Instead of Production orders Process order are used in Process industry.
These are more or less can be observed in any process industry.
Also Refer link
www.sdm-c.com/files/Barcelona_Mazliach_SAP_QM.ppt
Regards
Sujit S Gujar

Regarding Not enough quota is available to process this command

Hello,
My java application is is multi-threaded & is supposed to run as a 24/7 service. the application does number of I/O operations.
roughly 160,000+ read/write from/to flat files in the hard disk.
I was doing some testing and found that the application crashed
(it doesnt actually crash but rather freezes)
at around 5-7 hours after starting the application.
The exception thrown out was
Not enough quota is available to process this command.
ther are multiple instances of this exception thrown
The JVM doesnt actually crash but I get this exception thrown
during every read/write process.
This doesnt seem to be a Java exception but rather is thrown by the OS.
Also all the sockets that I have created in my application fails.
and all windows allications cease to work. They start to work
after I explicitly shut-down the JVM
I did some googling and found that I may need to increas my paging size.
My system has 1.5GB RAM and the default paging size was 3GB, I've
increased it to an initial size of 4092MB and a Max of 6092GB.
Now I find that the app runs a bit longer but still crashes.
I checked the Mem usage via task manager and the Mem usgae remains constant varies around 190,000K to 270,000K
I also checked using a profiler tool and it seems to be fairly constant.
Has anyone had this problem or any suggestions will be great!

I may have solved the problem, like I said I am making
160,000+ read/write everyday in my application.
i noticed that in my read and write methods - which is called 160,000 time, I open the file through a RandomAccessFile object but I dont explicitly close the file object at the end of the function!
I assumed that it will be taken care by JVM during garbage collection
Anyway after explicitly closing the RandomAccessFile object, the app doesnt seem to crash, anyway Ill let the app run for a whole week and see how it reacts performance wise.

Not enough server storage is available to process this command

Windows XP Pro x32 Connecting to Windows 8.1 Pro x64
I am trying to map a share on a Windows 8.1 Pro x64 machine (Surface Pro 3 512GB) to a drive letter on a Windows XP Pro x32 machine. I get an error saying:
Not enough server storage is available to process this command
I did a search and found:
http://support.microsoft.com/en-us/kb/106167
which says to increase (or set if it doesn't exist) the value of IRPStackSize in:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\LanmanServer\Parameters
Since the item didn't exist I created it and set it to 0xC (the maximum recommended value).
I then rebooted the Surface Pro 3 (Windows 8.1 Pro).
When I tried to map the share again I got the same error message.
Is this a Windows XP problem or a Windows 8.1 problem? In either case how do I get around it?
Please do not respond with a suggestion to upgrad the Windows XP machine. It is running software and accessing hardware that will not work with a later version of Windows.
http://www.saberman.com
Edit:
It appears to only be a problem in access shares on USB attached drives. There is no problem in access shares on the Surface Pro 3's C: drive. Is this a known problem?

>Have you tried to map the drive from the Windows 8.1 to the Windows 7 machine ?
Yes and it worked before I created IRPStackSize in the Windows 8.1 registry.
I increased IRPStackSize on the Windows 8.1 machine to decimal 50 and was able to map the Windows 8.1 share onto my Windows XP machine.
I noticed that the article at the link:
http://support.microsoft.com/en-us/kb/106167 said.
Note Values may range from 0x1 to 0xC. These values are equivalent to 1 to 12 in decimal notation.
There is an article at:
http://support.microsoft.com/en-us/kb/285089 that said:
The default value of the IRPStackSize parameter is 15. The range is from 11 (0xb hexadecimal) through 50 (0x32 hexadecimal).
Whereas the article at the external site said to keep making it larger until it works.
BTW, my Windows 7 and Windows XP machines have MSE for proctection. Windows 8.1 has Windows Defender. No third party software.
http://www.saberman.com

Not enough storage is available to process this command on 32bit Windows

Hello,
After deployment of an application in production, we have started to experience the error:
java.lang.Error: : Not enough storage is available to process this command.
at java.lang.Thread.start0(Native Method)
at java.lang.Thread.start(Thread.java:574)
with the configuration:
- JRockit27.6/
- WebLogic 9.2.3 with a 1,4GB heap
- 32-bit Windows2003 with /3GB.
The problem is caused by threads created by JCIFS and other 3rd party libraries.
The JVM process (java.exe) grows from 1,4GB to 1,96GB and the exception starts to occur.
Is there any other solutions than:
1) Move to 64-bit, http://cn.forums.oracle.com/forums/thread.jspa?threadID=1062107
2) Decrease the heap
3) Reconfigure Windows, http://stackoverflow.com/questions/507853/system-error-code-8-not-enough-storage-is-available-to-process-this-command
Any help to stabilize this 32-bit setup is appreciated!
Edited by: Allan Andersen on 2010-11-03 02:39

Had the pleasure of this one myself, due to (excessive) thread creation by JCIFS during AD log ons. This is an Out Of Memory exception. Not in the heap, but in the native memory used by the JVM process. I solved the issue by enabling the /3GB switch on Windows. Alternatively profile the memory usage of your application to minimize its usage of native memory. Look at these links for more inspiration:
http://cn.forums.oracle.com/forums/thread.jspa?threadID=1062107
http://blogs.oracle.com/jrockit/2008/09/how_to_get_almost_3_gb_heap_on_windows.html
http://forums.sun.com/thread.jspa?threadID=5343135
http://stackoverflow.com/questions/2640239/java-lang-error-not-enough-storage-is-available-to-process-this-command-when-g
http://stackoverflow.com/questions/507853/system-error-code-8-not-enough-storage-is-available-to-process-this-command
http://www.microsoft.com/downloads/details.aspx?familyid=5cfc9b74-97aa-4510-b4b9-b2dc98c8ed8b&displaylang=en
http://support.microsoft.com/kb/126962/
Regards,
Allan
Edited by: Allan Andersen on 2011-01-03 03:27

Process industry master data creation

Hi,
In discrete manufacturing if we have alternate bom or routings then it can be used through production version. But in process industry it seems bom has to be created first and bom has to be assigned in production version and through production version master recipe has to be created for that.
In process industry let me know which master data has to be created first. Kindly clear my doubt.
Regards / US

Hi,
In process industry you can create BOM in both ways....
Method 1: Create BOM through CS01.... after this create master recipe... then you create Production version for the combination of BOM and recipe... same like in discrete....
Method 2: while creating master recipe you can create BOM from there during this process system will ask you for production version...
Now It is up to you to decide which one is flexible to use....
Thanks
Kumar

Process Industry- How to map the Scenario?

Dear Gurus,
The is a Process Industry, Chemical Manufacturing Unit, which does the following sequence of Operation to get the Semi finished material.
1) Acid, TC, and Catalyst are 3 Raw materials
2) Acid, TC and catalyst after being put into reactors, they Undergo 2 Phases. Crude and Distillation
At crude phase, Crude is Produced. But they dont want to do confirmation of crude.
At Distillation stage, Main Fraction(MF), a semi-finsihed material is Produced
But at the distillation Phase, 2 more, Products are produced in conjugation to MF.
These 2 Products are Lower Fraction(LF) and Residue.
When these LF and Residue are produced, they again put into reactor and some qty of TC is added to achieve MF which again produces some portion of LF and Residue. And these cycle goes on.
They keep these process continuing.
In short: MF is derived in 2 ways
Acid+TC+ Catalyst=MF
LF+Residue+TC=MF
Please help me in mapping below Points comprehensively.( They want one Order Type for 2 phases.)
1) How BOM will be made of LF and residue if I treat them as Co-Product??? Or some other technique in SAP can map it?
2) What is the Step by step Costing configuration of Co-Products. I searched lot but unable to find the proper settlement rule of Co-Products.
Thanks
Shailesh Mishra

Dear Rahul,
As I understand that Co-Products cannot be subjected to movt type 261 and same i have tested in system. So, concept of Co-Product is not applicable here either with Recursive BOM application.
The solution which we have found here is that Client will make one of BOM of Acid+TC+ Catalyst
which will give MF. The concept of Reverse Calculation will be applied. Daily product of LF and Residue will be extrapolated at the Month end. And the LF and residue Quantity will be tracked not from system. Only during month end, LF and Residue Physical Inventory will be taken and it will be treated as Raw materials So, in the Running Process Order 262 will be done of So-called LF and residue. Stock Up(+)
And same Qty of LF and residue will be subjected to 261(Stock Down-) in the next month New Order in form of Raw material.
So cycle of 261 and 262 of LF and residue in form of Raw materials will be Perpetual and settlement of orders will also be sacrosanct.
Best regards
Shailesh

SAP_J2EE_ADMIN, no systems available for user mapping

Hello,
We are using EP 7.0 to run CRM applications (client 100).
We are creating portal users in 001 client of CRM server.
When I try to map users of portal to users of crm through user administration, it says that, "There are no systems available for user mapping for the selected principal".
I discovered that this warning disappears if I give the user has SAP_J2EE_ADMIN role in 001 client. But this time the user has the content adminstrator, user administrator and system administrator tabs as well. I don't want to give administrator rights to everyone.
What can I do?
Any recommendations?

I maintained the permissions like Administrator:None, End User:X, Role Assigner:X.
I removed the J2EE_ADMIN role from the user.
But unfortunately the result did not change. The user can not access the CRM system.
Here is the error:
Portal Runtime Error
An exception occurred while processing a request for :
iView : pcd:portal_content/com.sap.pct/specialist/com.sap.pct.crm/com.sap.pct.crm.roles/com.sap.pct.crm.crm_user/com.sap.pct.crm.ckm.home/com.sap.pct.crm.ckm.work/com.sap.pct.crm.act.activities
Component Name : com.sap.portal.appintegrator.sap.BSP
Exception in SAP Application Integrator occured: Cannot retrieve system object for this alias. System Alias: 'SAP_CRM', System ID: 'pcd:portal_content/j2eeadmin/systems/com.arr.SAP_CRM'. User: 'ILKNURY', Reason: Access denied (Object(s): portal_content/j2eeadmin/systems/com.arr.SAP_CRM).
Exception id: 04:32_24/04/07_0038_5660850
See the details for the exception ID in the log file

Error starting thread: Not enough storage is available to process...

Hi all,
We are seeing server going down frequently with below exception:
[ERROR][thread ] Failed to start new thread
[2010-04-08 14:36:54,046][ERROR][com.astrazeneca.portal.rss.ContentTransformer] - Error processing item:null
; SystemID: http://beaa.astrazeneca.net:10002/NewsBroker/resources/newsToRss.xsl; Line#: 21; Column#: 128
javax.xml.transform.TransformerException: java.lang.Error: Error starting thread: Not enough storage is available to process this command.
     at org.apache.xalan.extensions.ExtensionHandlerJavaPackage.callFunction(ExtensionHandlerJavaPackage.java:403)
     at org.apache.xalan.extensions.ExtensionHandlerJavaPackage.callFunction(ExtensionHandlerJavaPackage.java:426)
     at org.apache.xalan.extensions.ExtensionsTable.extFunction(ExtensionsTable.java:220)
     at org.apache.xalan.transformer.TransformerImpl.extFunction(TransformerImpl.java:437)
     at org.apache.xpath.functions.FuncExtFunction.execute(FuncExtFunction.java:199)
     at org.apache.xpath.XPath.execute(XPath.java:268)
     at org.apache.xalan.templates.ElemVariable.getValue(ElemVariable.java:279)
     at org.apache.xalan.templates.ElemVariable.execute(ElemVariable.java:247)
I have a weblogic support SR open and they suggested to add -XXtlaSize and -XXlargeObjectLimit to our JVM parameter. With these parameters, we are getting below error in Windows frequently:
Reporting queued error: faulting application java.exe, version 1.5.0.11, faulting module jvm.dll, version 27.3.1.1, fault address 0x0014b442.
I have seen few threads on Sun forum, but answer was not posted there. Details of our environment are as below:-
JVM : JROCKIT 1.5.0.11
OS : Windows 2003
Application Server : Weblogic 10
Any inputs or pointers will be highly appreciated as this is a bit urgent for me...
Thanks & Regards,
Sanjeev

Hi Henrik,
I am running Weblogic with below parameters now:
-Xnohup -Xms:1536m -Xmx:1536m -XXtlaSize:min=32k,preferred=768k -XXlargeObjectLimit:32K
Weblogic crashed again with below dump:
===== BEGIN DUMP =============================================================
JRockit dump produced after 0 days, 07:17:18 on Fri May 07 15:26:16 2010
Additional information is available in:
E:\PortalLIVDomaina\jrockit.5772.dump
E:\PortalLIVDomaina\jrockit.5772.mdmp
If you see this dump, please open a support case with BEA and
supply as much information as you can on your system setup and
the program you were running. You can also search for solutions
to your problem at http://forums.bea.com in
the forum jrockit.developer.interest.general.
Error Message: Illegal memory access. [54]
Exception Rec: EXCEPTION_ACCESS_VIOLATION (c0000005) at 0x005148AF - memory at 0x00000000 could not be written.
Minidump : Wrote mdmp. Size is 1406MB
SafeDllMode : -1
Version : BEA JRockit(R) R27.3.1-1_CR344434-89345-1.5.0_11-20070925-1628-windows-ia32
GC Strategy : Mode: throughput. Currently using strategy: genparpar
GC Status : OC currently running, in phase: sweeping. This is OC#3000.
: YC is not running. Last finished YC was YC#9937.
OC History : Strategy genparpar was used for OC#1.
: Strategy singleparpar was used for OC#2.
: Strategy genparpar was used for OC#3 to OC#3000.
YC History : Ran 11 YCs before OC#2996.
: Ran 18 YCs before OC#2997.
: Ran 11 YCs before OC#2998.
: Ran 8 YCs before OC#2999.
: Ran 1 YCs before OC#3000.
Heap : 0x00900000 - 0x60900000
Compaction : 0x06900000 - 0x0C900000
Could you please provide some input on this?
Thanks,
Sanjeev

MapViewOfFile: Not enough storage is available to process this command.

Hi,
Was trying to insert the documents and querying it at the same time. This error didnt happen before.
MapViewOfFile: Not enough storage is available to process this command.
PANIC: Not enough space
com.sleepycat.db.RunRecoveryException: DB_RUNRECOVERY: Fatal error, run database
recovery: MapViewOfFile: Not enough storage is available to process this comman
d.
PANIC: Not enough space: DB_RUNRECOVERY: Fatal error, run database recoveryHere is how my environment is configured:
public void setXmlEnvrionment()
          try
               //File envHome = new File(properties.getProperty("DATABASE_LOCATION"));
               File envHome = new File("");
               EnvironmentConfig envConf = new EnvironmentConfig();
               envConf.setAllowCreate(true); // If the environment does not exits,
               // create it.
               envConf.setInitializeCache(true); // Turn on the shared memory
               // region.
               envConf.setCacheSize(100* 1024 * 1024); // 100MB cache
               envConf.setMutexIncrement(22);
               envConf.setMaxMutexes(200000);
               envConf.setMaxLocks(200000);
               envConf.setMaxLockers(200000);
               envConf.setMaxLockObjects(200000);
               envConf.setInitializeLocking(true); // Turn on the locking
               // subsystem.
               envConf.setInitializeLogging(true); // Turn on the logging
               // subsystem.
               envConf.setTransactional(true); // Turn on the transactional
               // subsystem.
               // envConf.setTxnNoSync(true); // Cause BDB XML to not synchronously
               // force any log data to disk upon transaction commit
               envConf.setLogInMemory(true); // specify in-memory logging
               envConf.setLogBufferSize(60 * 1024 * 1024); // set logging size.
               envConf.setLockDetectMode(LockDetectMode.DEFAULT); // Reject a
               // random lock
               // request
               myEnv = new Environment(envHome, envConf);
               System.out.println("Environment created...");
          } catch (Exception ex)
               ex.printStackTrace();
     }Any idea how to solve this problem?
Many thanks! :)

Hi rucong,
What do you mean "write data in parallel with fine transaction protection"?
It seems fine for now... when I run on a Tomcat Server... thanks
There is another issue.. I tried to include snapshot isolation and tried running on the server
java -Xms32m -Xmx512m -cp Aggregator.jar:db.jar:dbxml.jar ag.SaveMessageinDBI increased the memory of the JVM to 512M. Tried inserting 200 documents and this error occurs
com.sleepycat.dbxml.XmlException: Error: Unable to generated a document ID, errcode = INVALID_VALUE
        at com.sleepycat.dbxml.dbxml_javaJNI.XmlContainer_putDocument__SWIG_4(Native Method)
        at com.sleepycat.dbxml.XmlContainer.putDocument(XmlContainer.java:893)
        at com.sleepycat.dbxml.XmlContainer.putDocument(XmlContainer.java:241)
        at com.sleepycat.dbxml.XmlContainer.putDocument(XmlContainer.java:229)
        at ag.SaveMessageinDB.addXMLDocument(SaveMessageinDB.java:231)
        at ag.SaveMessageinDB.saveMessage(SaveMessageinDB.java:84)
        at ag.SaveMessageinDB.main(SaveMessageinDB.java:324)Would require your help. Thanks!
:)

System availability in process industry

Similar Messages

Maybe you are looking for