System Bar Lost

I used to have a clock etc in system bar. Now only magnifying glass.

Note** An additional problem occurring with my installation of Leopard was this "No Finder" issue.
(Topic/Problem origionally posted by Michael Jasper.)
"My finder does not work. I have to open an application (i.e. Safari) just to be able to click on the apple in the upper left corner. When I open Force Quit Applications I see that my finder is not responding."
(Solution to above problem by EricShapiros.)
"The first step is to get Terminal.app to run. I was lucky that it was in my dock already. If not, you can probably ssh in from another Mac. You should be able to turn on remote login in System Preferences even without a Finder, I think.
Then type:
sudo mv "/Library/Application Support/DivXNetworks" "/Library/Application Support/DivXNetworks.prev"
Then click on the Finder in the dock and relaunch it. Or just reboot.
An alternate method would be to boot the Mac in target disk mode (hold down the "T" during boot) and plug it into another Mac via Firewire. Then just rename or remove the DivXNetworks folder.
Or boot from the 10.5 DVD and run Terminal.app from the menu. I guess that might be the easiest method since it doesn't require a second Mac, but you'll have to look in /Volumes for your boot volume name.
Good luck. "
This resolved ALL problems occurring with my Leopard install.
Thanks Eric
Ray

Similar Messages

  • I downloaded the iOS7 system and lost connectivity to my in-ceiling speakers and Air Play. How do I get it back?

    I downloaded the iOS7 system and lost connectivity to my in-ceiling speakers and Air Play. How do I get it back?

    Use the iOS7 Control Center to select AirPlay, and then, choose the appropriate AirPlay speaker to stream to.

  • 3D Axis System (bar type) doesn't work when there is only one z-channel

    Hello,
    I have a problem with a 3D Axis System, bar type.
    Everything works fine as long as the y-channel contains more than one value (meaning there is more than one z-channel too).
    But when my y-channel has only one value, and there is only one z-channel, the axis system goes blank (there is just an empty white field with a thin outline).
    I don't understand why it doesn't work that way. The length of my one z-channel is the same length as my x-channel, as it should be.

    HI, 
    could you describe your hardware and software setup?
    If this is possible please attache your project.
    Roman Rolnik
    Application Engineer
    NI Germany

  • HT4623 I just updated my Iphone 4s to the new operating system and lost ALL MY CONTACTS on my phone. Everything else is there. HELP!

    I just updated my Iphone 4s to the new operating system but lost ALL MY CONTACTS on my phone. The contact list on my phone is completely blank. PLEASE HELP!

    Hello 6underwood,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/TS3581
    If you are experiencing difficulties with the connection between your stereo and device, disconnect the device, and then power cycle the stereo and your iPhone, iPod touch, or iPad. When the Home screen reappears, reconnect your device. If you cannot power cycle the stereo, turn the car off and then back on to allow the stereo to power off.
    Best of luck,
    Mario

  • I just updated to the new operating system and lost all my purchased app how do I get them back.

    I updated to the new operating system in lost all my applications could someone please help me

    Jon...
    If you are a resident of the U.S. you can re download iTunes purchases for free.
    Instructions here >  Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Genius Bar lost a business file. Can't seem to find it in Time Machine...Got Ideas?

    Genius Bar lost a business financial file. Can't seem to find it in Time Machine. Gone back several days...Got Ideas?

    You need to give me more info..
    What did you take the Mac to the genius for??
    What did they do to it?
    Did you have TM setup at defaults doing backups hourly?
    Are you using a Time Capsule? Did you ever backup the time capsule??
    Please do a backup of your Time Machine backup right now.. in TC plug in a suitable sized USB drive and do an archive.. you can do nothing else while this is happening but it is crucial for you to have another copy of whatever you have.
    Archive is a bit slow.. and the backup is slightly less useful.
    The fastest method is plug the USB into your computer and copy and paste  the backups.backupdb directly to the USB drive. It should copy at around 60GB/hr so calculate how long that will take. See instructions here. http://pondini.org/TM/18.html Assuming you are using a TC then you use method 4.. copying from a Network backup to local drive.
    Never work directly from the original backup .. work just from this copy so anything you do can be reversed or recovered.
    Read very carefully the methods of restoring files from TM.. it is a bit out of date but Pondini has the best details.
    So Q14-17 here. http://pondini.org/TM/FAQ.html
    You can do a full recovery of the backup to a USB drive.. and then search for your file in more normal way.
    Get professional help.. and this is where you need data recovery people who are familiar with apple TM backup format. Check local apple store or perhaps better local Apple independent repair business that are used to handling this kind of event.
    Also talk to the company that makes the software as they must have to deal with people who manage to lose, corrupt or in some other way ruin their data and need to recover.. see what hints they can give you.
    Surely at some point you pass your info to your accountant in the form of a computer backup file from your accounting package.
    I have to admit I am surprised if you never backed up your business data file to a USB stick and put it in a filing cabinet at home or a hard disk at a friends place.. Cloud storage for your business files.. Did you depend totally on TM for backups? You never planned for a fire or theft of your computer and TC?? Or what has happened.. loss of computer files and failure of the backup? No greater teacher than the burnt hand that touching hot stuff isn't a good idea. Sorry .. it is a very hard lesson.. but electronic data storage on magnetic media is ever one byte away from being gone forever.. !!

  • Can I turn off the Android 3.0 system bar?

    I'd love to get the full 1280 x 800 from the Android screen, but the system bar at the bottom of the screen is eating up 48 pixels. Is it possible to discable that bar when my viewer is active? Many thanks in advance.

    I only know about These Photos of the kindle showing wired and vanity fair
    in full screen modes.
    http://www.google.de/search?tbm=isch&source=mog&hl=de&gl=de&client=ms-android-google&q=ado be%20digital%20publishing%20suite%20kindle%20fire&sa=N&biw=360&bih=515
    In a quick mobile search I did not found a real image or video showing
    these titles in action. I really would like to see the performance of the
    content viewer on the fire.
    —Johannes
    (mobil gesendet)

  • It appears that windows 8 operating system is lost on an hp 2000 notebook

    It appears that windows 8 operating system  is lost on an hp 2000 notebook and pc won't boot up. what steps could I try to recover it

    Hi:
    Please see if the information at the link below is of help to you.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c03489643&lc=en&jumpid=reg_r1002_us...

  • How to test SAP predefined system bar codes

    hi as above mentioned, can I test this? there are serveral system bar codes, but I don't know which one to choose, how to do?
    thanks
    b.r
    elly

    Hi Elly,
    You can get all lists of Barcodes in SE73.
    But choosing correct barcode is depends on company and their business. All Barcodes are not at all used for all business. Ask you functional consultant (or Business person) to take what type of barcodes to print.
    regards,
    ram

  • Volume Panel Missing in System Bar

    I had dl and installed the following driver/application on my fresh installed Windows XP and notice that the volume panel is missing from the system bar.
    Creative Sound Blaster X-Fi series driver 2.8.003
    Creative Console Launcher 2.6.09
    Had search thru the forum and volpanel.exe in not included in the above mentioned installation package. Please advise a solution. Thank!

    & I had solved the problem by installing Creative Console Launcher 2.60.29 and follow by Creative Console Launcher 2.6.09
    It seem like the volume panel is not included in the latest installation package.
    Message Edited by kendrick82 on 07-27-2009 09:07 AM

  • I upgraded my operating system and lost iLife. Is that normal/fair?

    I upgraded my operating system and lost iLife. Is that normal/fair? I used to have iPhoto, GarageBand, etc...

    Did you erase your hard drive before upgrading? If you have the install disks, you can just reinstall. Unless you have recently purchased your Mac and do not have the older versions installed, the new versions at the app store have to be purchased.

  • System Bar (or status bar) Hindering Drop and Drag

    I built an air app in flash pro. I have pots (movieclips) that the user can drag to burners on a stovetop. The pots are the only targets and if you drag a pot anywhere else, they should snap to the nearest burner.
    But draging a movieclip over the sytem bar in iOS or any version of android, mouse_up or touch_end mouse events are not sent. So the object just hovers there. any ideas anybody to fix this issue?

    thanks for responding. sorry i missed seeing your response till now. i missed the email to notify me somehow.
    i did assign the touch_end to the stage.
    //http://help.adobe.com/en_US/as3/dev/WS1ca064e08d7aa93023c59dfc1257b16a3d6-7ffe.html
    function fingerLeave(e:TouchEvent) :void {
                   if (e.isPrimaryTouchPoint == false)
                        return;
                   pot.stopDrag();
                   if (e.stageX <= 0){
                      //send pot to closest burner nearest this part of the stage
                   } else if (e.stageX >= stage.stageWidth){
                             //send pot to closest burner nearest this part of the stage}
    this had no effect for me when the pot is dragged over the system bar. It would just get stuck there.

  • Pixel Size of Android System Bar on 7" Tablets

    I can't seem to find this information anywhere. Pre-Honeycomb I believe there was no System Bar. I'm reluctant to purchase a 7" device just to check this once.
    Does anybody have experience with this. With 10.1" Tablets the pixel bar is 48 pixels high, is it the same on 7" Tablets at 1024x600 ?

    If anyone's interested, it appears to still be 48 pixels on the 7" device.

  • Navigation system bar moves before starting the application

    Hello all,
    I'm developing a game using air 2.6. I have an issue in a samsung tab 10.1 using Android 3.0 when I start the application the navigation system bar moves to the right side and later it comes back to the bottom side before to show off the game. Initially is not possible to rotate the game.
    Has anyone had the same problem? Has anyone a clue?
    Thanks in advance.

    I reset the master password, but it did not change anything.
    I reinstalled everything, tried again, and still nothing on this side.
    There isn't anything in the log [when I click on "View server log" I get a "no such file or directory" dialog box...].
    When I click on start, I immediately get the following message on the shell :
    "Internal HTTP server running on port 8082" and I can use my web browser to go on "http://localhost:8082/"...

  • I upgraded my system and lost all my photos. Can they be recovered.

    I upgraded my system and lost all my photos. I remember getting a message that my photos are not readable and do I want to replace. I quickly said yes without reading the message carefully. I lost all my photos. Can they be recovered?

    Look in your /Home/Pictures/ folder for the iPhoto Library file. Do you have one there? Look at the modification date for it. What is the date relative to the date you did this upgrade? If you double click on the file what happens? Do you have another iPhoto Library file by chance? If so what happens if you double-click on it?

Maybe you are looking for