System base device driver

Hi,
Im here because i need help with system base devise drivers.
Recently i reinstalled windows 8.1 on probook 4540s (Serial: [Personal Information Removed], Product: C4Y85EA#BED). And i have two missing "system base device" drivers:
PCI\VEN_197B&DEV_2393&SUBSYS_17F6103C&REV_30\4&13875A55&0&03E2
PCI\VEN_197B&DEV_2392&SUBSYS_17F6103C&REV_30\4&13875A55&0&00E2.
Can someone help me to solve this probem?
Kind regards and thank you.
This question was solved.
View Solution.

Thank you soo muck!

Similar Messages

  • Windows 8.1 - T530 - Base Device Driver missing!

    Hi guys,
    Been working to solve this base device driver missing in my T530 image since couple of hours now. I've searched a lot and seen many threads talking about this problem. Tried every solution I ran into but nothing worked so far.
    PCI\VEN_1180&DEV_E822
    Form what I know, this should be a Ricoh Media Card Reader driver. I think I tried like 10 drivers from Windows 7, Windows 8, Windows 8.1, 32 bits and 64 bits and nothing worked so far. Tried Smart Card reader driver too.
    All Windows Update are installed at the moment.
    Any clue to help me?
    Best regards
    Solved!
    Go to Solution.

    I don't know what is the Have Disk...!
    Yesterday... we managed to install the driver using the Ricoh Media Card Reader Driver for Windows 8.1 (32-bit, 64-bit) 25 mars 2014. I could swear I had tried them all... So I took the extracted files and added them to the imaging thingy and it doesn't work anymore!
    I did Windows Update on the T530. I did try to manually and auto install using the same driver but it won't work anymore
    Any clue?

  • Missing Base System Device Driver for Elitebook 8440p

    Missing Base System Device Driver for Elitebook 8440p

    Hi Doctorsherif,
    I am sorry, but to get your issue more exposure I would suggest posting it in the Commercial Forums since this is a commercial product or Business product. You can do this at
    http://h30499.www3.hp.com/hpeb/
    Thanks
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • T420 Base System Device Driver not working W7

    Hello,
    After reinstalling W7 the lenovo solution center was complaining saying that the System Device Driver is not working.
    I saw that the SD card reader was not working neither so I assumend the missing driver was that one.
    From the Lenovo page I dowloaded the driver for the Multi Card port for W7 and T420. After installing it the message dissapeared and the SD cards were recognized properly.
    However, after rebooting the system, after a while, the mesage appeared again and the card reader stopped working.
    I did install it again and the same happened. It was working and after two reboots stopped working.
    If find this quite misterious. I wonder If anyone knows how to fix this.
    Solved!
    Go to Solution.

    Hi Zardoz,
    Welcome to Lenovo Community!
    As per your query we understood that you are facing the issue with SD card reader on ThinkPad T420.
    This kind of issue will occurs if there is any issue with drivers, hence I suggest you to uninstall the recent installed card reader driver from your system through Control panel – Program & feature option and restart the system.
    After restarting the system please download & install ThinkVantage system update utility from Lenovo support site, after the installation run the program so that it will search for all the required drivers and application for your system.
    Below is the link to enter the downloads page and download latest application accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
    http://support.lenovo.com/en_US/downloads/default.page#
    Hope this helps!
    Best regards,
    Hemanth Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • My screen says boot device not found. Please install an operating system on hard drive,

    My screen says boot device not found. Please install an operating system on hard drive. What could have caused this problem? Help!!!!!

    Hi,
    Can you post back with the following.
    1.  The full Model No. and Product No. of the notebook - see Here for a further explanation.
    2.  The full version of the operating system you are using ( ie Windows 7 32bit ).
    3.  Shut down the notebook.  Tap away at f10 as you start the notebook to enter the bios menu.  Under the Advanced or Diagnostic tab you should find the facility to run a test on the Hard Drive.  Post back with the details of any error messages.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • ITunes & Apple Mobile Device Driver Not Compatible w/ Windows 64bit Systems

    In short, I spent over 2 hours on the phone tonight with Apple Support. The call was elevated to a software engineer. After several minutes he apologigized and state the Apple Mobile Device Driver is not compatible with Windows 64Bit systems.
    Therefore I can't activate or do anything for that matter. I effectivly have a $600 paper weight. I asked the engineer if they have any intention fixing it and never received a direct response.
    None of the documentation that I have found states 64bit Operating Systems are not supported. The support rep stated nor he or his collegues were unware the mobile device driver didn't support 64 bit OSs either. I consider this to be really misleading and a huge oversight on Apple's part.
    I wrapped up the call by asking him how I go about returning the device without being struck by the 10% restocking fee. He didn't know.
    Anyone have Steve's number? I sure would be nice to get at the minimum a full refund.
    I just thought everyone else should know so you don't tie up support lines and waste your time trying to find a resolution.
    Regards,
    KSPad

    OMG same thing here; rather annoyed and now have set up accounts on 2 comps(both 64 vista ultimate); about to try my 32 bit vista on my lappy; we'll see... i don;t have high hopes thoush.
    What i knew about iPhone before buying it:
    What You Need
    To use iPhone, you need:
    A new two-year wireless service plan with AT&T
    A Mac or a PC with a USB 2.0 port and one of the following operating systems:
    Mac OS X version10.4.10 or later
    Windows XP Home or Professional with Service Pack 2 or later
    Windows Vista Home Premium, Business, Enterprise, or Ultimate edition
    iTunes 7.3 or later, available at www.itunes.com
    An iTunes Store account
    An Internet connection
    You must be at least 18 years old to open a new AT&T wireless account. You will need a
    major credit card to open a new iTunes Store account.
    Yeahyeah check all that stuff;
    Oh well; just when i thought i'd finally cross over to the beautiful packaging of APPLE. I remember in design school that form follows function. Thanks.
      Windows Vista  

  • Itunes/Iphone/Ipod device driver issues - tried everything. Still not working.

    After hours and hours of research, I'm completely stuck. Here's the basic problem.
    When I plug in my Iphone to my laptop, windows pulls up a little window that says installing device driver software. After several minutes, the process fails and a message comes up that says windows found drivers for my device, but encountered an error and wasn't able to install them. In the device manager, the iphone is listed as an "other device" with a yellow triangle/exclamation point. Itunes never recognizes the device.
    When I plug in my ipod nano 4th generation, the exact same thing happens, except it's listed in the device manager as an ipod. (same yellow triangle though.)
    Up until today, both of these devices have been working properly, syncing without trouble. The iphone synced wirelessly and the ipod every time I plugged it in. I can't figure out what on earth happened to my laptop today that messed things up.
    It's also worth noting that I have another older ipod nano... second generation, I think, that plugs in and is recognized immediately, works perfectly.
    Here is what I've done so far:
    1. I worked through every single troubleshooting guide that Apple has to offer. No change.
    2. I did a complete clean install of itunes and all additional components, rebooted and reinstalled. No change.
    3. I uninstalled/re-installed usb controllers in the device manager. No change.
    4. reset both the phone and the ipod. No change.
    5. I've tried various cables. No change.
    6. I've run system checks and repair utilities for windows vista.
    7. I've used selective start up to see if another program is interfering. I've stood on my head and counted to one hundred. I've only said seventeen swear words.
    At this point I've done so much searching and troubleshooting, I can't imagine how anything is going to fix this issue. So this is my last hope. Please oh please be smart enough to tell me what to do...

    Not sure if this is significant, but in a weird turn of events, when I tried plugging the ipod in this morning, the little message that pops up to install device driver software actually told me the drivers were installed successfully. However, in the device manager, it still says the drivers are NOT installed properly, the little yellow triangle is still there and the ipod still isn't registering in itunes, or my computer. So. Not really any improvement, but a different symptom none the less?
    I'm desperate, guys. Someone help?

  • Can some one help me with diagnostic test result " apple mobile device driver not found"?

    I bought an iPhone 4gs 32gb from Singapore. iso 4. I'm living in Chennai, India. To connect it to my computer (windows XP,), I have downloaded iTunes 10.6.1.7. Unfortunately iTunes is not recognizing my iPhone.  I had tried to troubleshoot it by reinstalling iTunes (2 times). I have restarted the apple mobile device from control panel. I try connecting my iphone in another usb port. but no use. I don't know what am I missing?.  iTunes opens on my computer. but doesn't recognize my device. when I click on help. it says an "unknown error has occurred. your computer is not connected to internet. please check your internet connection and try again later". I don't know what to do? could you please help me? thank you so much for your help and time.
    when I update the usb driver (C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.Double-click the usbaapl file.) I followed the procedure from this site. http://support.apple.com/kb/TS1538 when I finished, it says "the specified location does not contain information about your software"
    I did the apple's diagnostics test on my computer. I'm pasting the result for your info.
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    System manufacturer System Product Name
    iTunes 10.6.3.25
    QuickTime not available
    FairPlay 1.14.43
    Apple Application Support 2.1.9
    iPod Updater Library 10.0d2
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 5.2.0.6
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0013AC2C08548378
    Current user is an administrator.
    The current local date and time is 2012-06-28 15:23:45.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel(R) G41 Express Chipset
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Network Connectivity Tests ****
    Network Adapter Information
    Adapter Name:        {D85300A1-330D-41ED-AC5A-EC032B22FBF0}
    Description:            Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller - Packet Scheduler Miniport
    IP Address:             192.168.1.3
    Subnet Mask:          255.255.255.0
    Default Gateway:    192.168.1.1
    DHCP Enabled:      Yes
    DHCP Server:         192.168.1.1
    Lease Obtained:     Thu Jun 28 15:17:19 2012
    Lease Expires:       Fri Jun 29 03:17:19 2012
    DNS Servers:         192.168.1.1
    Active Connection: LAN Connection
    Connected:             Yes
    Online:                    Yes
    Using Modem:        No
    Using LAN:             Yes
    Using Proxy:           No
    Firewall Information
    Windows Firewall is on.
    iTunes is enabled in Windows Firewall.
    Connection attempt to Apple web site was unsuccessful.
    The network connection timed out.
    Basic connection to the store failed.
    The network connection timed out.
    Connection attempt to Gracenote server was successful.
    The network connection timed out.
    iTunes has never successfully accessed the iTunes Store.
    **** CD/DVD Drive Tests ****
    No drivers in LowerFilters.
    UpperFilters: GEARAspiWDM (2.2.0.1),
    G: Optiarc DVD RW AD-7220A, Rev 1.01
    Drive is empty.
    **** Device Connectivity Tests ****
    iPodService 10.6.3.25 is currently running.
    iTunesHelper 10.6.3.25 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C8.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27C9.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CA.  Device is working properly.
    Intel(R) N10/ICH7 Family USB Universal Host Controller - 27CB.  Device is working properly.
    Intel(R) N10/ICH7 Family USB2 Enhanced Host Controller - 27CC.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    **** Device Sync Tests ****
    No iPod, iPhone, or iPad found.

    I have the same problem. I think that someone tried my iphone before me because when I want to reset it, I'm invited to enter a password that I didn't set. Also, when I go the Map application, the iphone indicate that I'm locateded in China while I'm in Tunisia. Now, I can't connect to my iphone to itunes, and I can't reset it because it ask me to enter a password that I didn't set.
    This is my post:
    https://discussions.apple.com/thread/4063223
    Please, we need your help.

  • Create additional installer error code -12 file not found from device driver cd

    I'm trying to build an installer for a project that includes several NI drivers - specifically NI-DMM. NI-SCOPE, NI-SWITCH, NI-845x, and a few others (MAX, DAQ, etc). When I build the software standalone (and only include the run-time engine), it works fine. However, when I try to build the installer with the additional installers (mentioned above), the build prompts me for device driver cds, and then fails. Specifically, it fails on the February 2006 Device Driver cd. The error is attached below.
    I have tried
     - repairing all the installations of the software mentioned
     - using a new project and re-adding the files
     - building the additional installers seperately (no source code installed)
     - copying the driver cds to the harddrive and referencing them there when needed
    The next step will be to reinstall all of those drivers from scratch, but I really would prefer not to. Does anyone have any ideas (or solutions) regarding this problem?
    CDK_CreateNewWizard_Invoke.vi.ProxyCaller >> CDK_CreateNewWizard_Invoke.vi >> CDK_InstallerConfiguration_Editor.vi >> CDK_Build_Invoke.vi >> CDK_Engine_Main.vi >> CDK_Engine_Build.vi >> CDK_Engine_PromptForMissingDist.vi >> NI_MDF.lvlib:MDFDistCopyList_CopyItem.vi
    Loading product deployment information
    Loading product deployment information
    Loading product deployment information
    Adding files to installer
    Done adding files
    Preparing to build deployment
    Copying products from distributions
    Copying distribution 'NI-845x Software 1.0.1' from: C:\National Instruments Downloads\NI-845x\1.0.1\ to: C:\PTF\Builds\**********************<edited out>
    Copying distribution 'National Instruments Device Drivers - February 2006, Disk 1' from: C:\National Instruments Downloads\DCD-Feb06-1\ to: C:\Program Files\National Instruments\Shared\ProductCache\
    *** Error: Windows SDK function returned an error. (Error code -12)
    The system cannot find the file specified.
    *** End Error Report
    Done building deployment

    I have had this happen a lot espescially with LV 8.0 -8.20. What I had to do was take the device drivers CD and copy it to the and run the installation of the software from the copy on the hard disk.
    When you build an exe with additional installers it looks at the last place that  you installed the drivers from. Anyway it worked for me so it might work for you.
    Joe.
    "NOTHING IS EVER EASY"

  • Old iPod mini can't be recognized after formatting, and iTunes 'Apple Mobile Device Driver not found.'

    My roommate gave me an old iPod Mini a few days ago. It was working fine 'til I plugged it into my computer and it asked me to format it. I did, and now it cannot be recognized by iTunes or my computer. My computer views it as a "removable disk" which cannot be accessed. In devices, it is listed as an Apple iPod though, so I'm hoping not all is lost. I have tried many quick fixes I've read on internet (including changing disk letter) but to no avail. I have reinstalled the new iTunes and now that is telling me it has not installed properly, and when I ran diagnostics, it reads that the Apple Mobile Device Driver not found. I will copy & paste all the info from the diagnostic run below, and if anybody can help me with my new (old) iPod, I'd be everly greatful!
    Thanks!!
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    TOSHIBA Satellite L775D
    iTunes 11.0.1.12
    QuickTime 7.7.3
    FairPlay 2.2.32
    Apple Application Support 2.3.2
    iPod Updater Library 10.0d2
    CD Driver Not Available
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 6.0.1.3
    Apple Mobile Device Driver not found.
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number
    Current user is not an administrator.
    The current local date and time is 2013-01-08 11:16:27.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is supported.
    Core Media is supported.
    Video Display Information
    ATI Technologies Inc., AMD Radeon(TM) HD 6520G   
    **** External Plug-ins Information ****
    No external plug-ins installed.
    **** Device Connectivity Tests ****
    iPodService 11.0.1.12 (x64) is currently running.
    iTunesHelper 11.0.1.12 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Standard OpenHCD USB Host Controller.  Device is working properly.
    Standard Enhanced PCI to USB Host Controller.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.
    Most Recent Devices Not Currently Connected:
    iPod mini running firmware version 1.4.1
    Serial Number:    JQ******S42
    <Edited By Host>

    OMG same thing here; rather annoyed and now have set up accounts on 2 comps(both 64 vista ultimate); about to try my 32 bit vista on my lappy; we'll see... i don;t have high hopes thoush.
    What i knew about iPhone before buying it:
    What You Need
    To use iPhone, you need:
    A new two-year wireless service plan with AT&T
    A Mac or a PC with a USB 2.0 port and one of the following operating systems:
    Mac OS X version10.4.10 or later
    Windows XP Home or Professional with Service Pack 2 or later
    Windows Vista Home Premium, Business, Enterprise, or Ultimate edition
    iTunes 7.3 or later, available at www.itunes.com
    An iTunes Store account
    An Internet connection
    You must be at least 18 years old to open a new AT&T wireless account. You will need a
    major credit card to open a new iTunes Store account.
    Yeahyeah check all that stuff;
    Oh well; just when i thought i'd finally cross over to the beautiful packaging of APPLE. I remember in design school that form follows function. Thanks.
      Windows Vista  

  • HT1386 apple mobile device (recovery mode)  I cannot find device driver to install so that Itunes will recognize my ipod touch...?

    An update to my ipod touch failed to install.  Somehow the driver failed to install and then somehow the drivers got "lost"  I looked all over my system for a driver, windows searched the web for a driver to no avail.  I looked on Itunes for updates and my itunes is updated.  At a loss for what to do next to try and recover driver....help anyone?  thanks

    Try
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Then the driver topic of:
    iOS: Device not recognized in iTunes for Windows

  • Install Device Driver Software for Palm TX

    My new notebook has Windows Vista and I have had my Palm TX for almost two years.  To install the Palm on my notebook I downloaded the version for Vista from Palm.com.  When I went to synchronize the Palm with the computer during the installation the message kept coming back that "device driver software" could not be found.  Where do I find the driver software?  Is it on the original CD that came with the Palm?  At this point I don't know what to do.  Can someone help me with this problem?
    Post relates to: Palm TX

    mar008,
    When you upgraded to Vista, did you install over the existing XP install on the same PC or get a new computer with Vista?
    If you upgraded over the existing install of XP, you may need to do a "clean" uninstall and re-install Palm desktop. You should be able to use the original CD that you got with the TX on the Vista OS.
    Not sure why you are getting the 680 message. Did you ever have a Treo 680 or a handheld that is a different model than the TX?
    Here are the "clean" uninstall procedure for Vista.
    You should first make a copy of your data to have just in case something
    happens. You can find your data files by going to Start --> Documents -->
    Palm OS Desktop. Highlight your Palm Desktop username and right click and
    copy. Then go to your PC desktop right click on a blank spot and select paste.
    Now you want to uninstall Palm Desktop and remove everything that has to do
    with Palm Desktop from your computer.
    Go to the following locations on the PC and delete the folders listed below.
    C:\Program Files\Palm or Palm One
    C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
    PalmOne
    C:\Users\[Vista Login Name]\appdata
    *Note you may need to view hidden folders to get to appdata. To do that go
    into your control panel and open folder options. Go to view tab and uncheck
    hide hidden files.
    Once this is done you will need to delete some registry keys from your PC Operating System.
    Word of warning, going here and deleting the wrong thing can cause your PC
    from starting up, crashing and deletion of programs and data. If you feel
    you are unsure of yourself, see if you have a friend that can help you or a
    PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
    Go to start on the PC, in the search field type "regedit.exe" without quotes.
    Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
    Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
    The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
    If you make a mistake, stop what you are doing. And call a PC technician.
    BUT do not turn off your computer.
    The reg keys are as follows (Note: some of theses reg keys will not be here
    but if they are delete them)
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
    * HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
    * HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
    * HKEY_CURRENT_USER\Software\Palm
    * HKEY_CURRENT_USER\Software\Palm, Inc.
    * HKEY_CURRENT_USER\Software\PalmDesktopAutorun
    * HKEY_CURRENT_USER\Software\palmOne
    * HKEY_CURRENT_USER\Software\PalmSource
    * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
    Next reboot your computer.
    Then reinstall your palm desktop from the CD and do a hotsync. If it asks
    you for a username and you synced your device before, put in 'test" if you
    did not sync before create a hotsync name.
    Post relates to: Palm i705

  • I updated Adobe Flash player and now each time I use Firefox for video get a serious error with blue screen of death pointing at device drive ati2dvag - BUT ok in IE 8

    See above

    I tried updating my ATI driver but I continued to have intermittent problems (system hangs and unexpected reboots) with current versions of Shockwave in Firefox - a right pain in the neck. I noticed that the date changed on the driver ... but not the version ... ??!!
    So I am now back where I started (I rolled back the device driver):-
    Shockwave Flash 10.1.102.64
    ATI Radeon HD 2400 Pro, device driver version, 8.401.0.0 dated 27/07/2007.
    Haven't the folks at Adobe/Firefox heard of 'backwards compatibility' ?!
    It seems I am stuck now ... until a version of Flash comes out which addresses my specific problem ...
    Does anybody have a solution ??
    MANY THANKS!

  • PCI-6534 Device Driver Availabili​ty

    I am thinking of using a PCI-6534 for continious streaming 32 bit digital pattern generation from a host PC and clocked via an external clock at 1 - 10 MHz. From the benchmarks it seems that the PCI-6534 will meet these needs. My question involves device drivers. Windows is not an option for the system I am constructing as we have stability requirements that border on the need for a hard real time system. Is there enough information available about the card to allow a device driver to be written for an operating system such as Linux or RTLinux? Alternatively are such drivers available or alternatively for a RTOS such as QNX or VxWorks?

    National Instruments does not provide drivers for the Operating Systems you listed.
    However, there is a lot of information available on the PCI-DIO-32HS and register level programming available on the National Instruments website at:
    www.ni.com/support/daqsupp.htm
    view the Register Level programming link.
    under that link there is some information about programming the card through the registers. Also view the DAQ Register Programming link in the register programming site for examples and header files.
    In addition you may want to visit http://www.ni.com/linux/daq_comedi.htm
    where National Instruments provides information and a link to the Comedi group which has developed a Driver for Linux that has had success with the PCI-DIO-32HS.
    Hope this help you get starte
    d.

  • I having trouble installing device driver ref. cd's on windows XP 64 bit OS

    I recently purchased labVIEW 8.2.1 and the sound and vibration toolkit.  The DAQ unit I have is the ni-9233USB.  I 've got a couple of options as far as computers that I can load the software onto.  The computer that I would like to use is my laptop, but I have the windows XP 64-bit operating system.  LabView seemed to install fine, but when I try to install the device driver reference cd's, it tells me they are uncompatible with the 64 bit OS.  I was curious if NI had driver cd's or a solution that is compatible with the 64 bit OS?
    Thanks

    Hi,
    Windows XP 64-bit is not a supported OS for the drivers and while LabVIEW may install it's actually not supported either. Vista 64 bit is supported, and you'll want to make sure to be using the most recent version of DAQmx (v 8.5) as well as LabVIEW 8.2.1.
    Hope this helps,
    Andrew S
    National Instruments  
    Getting Started with NI-DAQmx
    Measurement Fundamentals

Maybe you are looking for