System board of SF 6900 is shutting down automatically of high temperature

Hi
In SF6900, the system board SB1 is automatically shutting down. The following are the logs, can anyone confirm if i have to replace the system board or is there any other fix?
showlogs -v
Sep 18 12:31:25 sep21-admin-sc0 Platform.SC: [ID 112625 local0.notice] FT1, fan speed, High (4,2)
Sep 18 12:31:25 sep21-admin-sc0 Platform.SC: [ID 120817 local0.notice] FT2, fan speed, High (4,2)
Sep 18 12:31:25 sep21-admin-sc0 Platform.SC: [ID 129009 local0.notice] FT3, fan speed, High (4,2)
Sep 18 12:31:25 sep21-admin-sc0 Platform.SC: [ID 861705 local0.notice] /N0/SB1, sensor status, outside acceptable limits (7,1,0x205010500030000)
Sep 18 12:31:25 sep21-admin-sc0 Platform.SC: [ID 101552 local0.notice] /N0/SB1, sensor status, shutdown (7,3,0x205010500030000)
Sep 18 12:31:49 sep21-admin-sc0 Platform.SC: [ID 811484 local0.notice] /N0/SB1: powered off
Sep 18 12:34:18 sep21-admin-sc0 Platform.SC: [ID 807377 local0.notice] FT0, fan speed, Low (4,1)
Sep 18 12:34:18 sep21-admin-sc0 Platform.SC: [ID 169540 local0.notice] FT1, fan speed, Low (4,1)
Sep 18 12:34:18 sep21-admin-sc0 Platform.SC: [ID 431684 local0.notice] FT2, fan speed, Low (4,1)
Sep 18 12:34:18 sep21-admin-sc0 Platform.SC: [ID 693828 local0.notice] FT3, fan speed, Low (4,1)
Sep 18 16:19:25 sep21-admin-sc0 Platform.SC: [ID 740317 local0.notice] Main, up 28 days 20:27:43, Memory 7,031,904
Sep 18 20:19:25 sep21-admin-sc0 Platform.SC: [ID 683143 local0.notice] Main, up 29 days 00:27:43, Memory 6,084,592
Sep 19 00:19:25 sep21-admin-sc0 Platform.SC: [ID 783229 local0.notice] Main, up 29 days 04:27:43, Memory 6,755,952
Sep 19 04:19:25 sep21-admin-sc0 Platform.SC: [ID 248112 local0.notice] Main, up 29 days 08:27:43, Memory 5,805,104
Sep 19 08:19:25 sep21-admin-sc0 Platform.SC: [ID 627151 local0.notice] Main, up 29 days 12:27:43, Memory 6,410,168
Sep 19 12:19:25 sep21-admin-sc0 Platform.SC: [ID 151055 local0.notice] Main, up 29 days 16:27:43, Memory 5,591,520
Sep 19 16:19:25 sep21-admin-sc0 Platform.SC: [ID 191622 local0.notice] Main, up 29 days 20:27:43, Memory 7,114,208
Sep 19 17:24:35 sep21-admin-sc0 Platform.SC: [ID 449265 local0.alert] FULL-COOLING ENGAGED: turning fans high
Sep 19 17:24:35 sep21-admin-sc0 Platform.SC: [ID 746364 local0.warning] WARNING: /N0/SB1 temperature is approaching max limit of 105C
Sep 19 17:24:35 sep21-admin-sc0 Platform.SC: [ID 332049 local0.warning] /N0/SB1 DX 0 Temp. 0 value: 107 Degrees C
Sep 19 17:24:35 sep21-admin-sc0 Platform.SC: [ID 362413 local0.warning] Check for abnormal environmental operating conditions.
Sep 19 17:24:35 sep21-admin-sc0 Platform.SC: [ID 310355 local0.error] Notice: Shutting down /N0/SB1 as temperature exceeds max limit of 105C
Sep 19 17:24:35 sep21-admin-sc0 Platform.SC: [ID 969886 local0.error] /N0/SB1 DX 0 Temp. 0 value: 107 Degrees C
Sep 19 17:24:35 sep21-admin-sc0 Platform.SC: [ID 231341 local0.error] Check for abnormal environmental operating conditions.
Sep 19 17:24:35 sep21-admin-sc0 Platform.SC: [ID 468401 local0.notice] /N0/SB1: has been queued for power off.
messages logs
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 783031 kern.info] NOTICE: [AFT0] L3_WDC Event detected by CPU519 at TL=0, errID 0x000472db.3855bbf0
Sep 4 09:44:17 sep21 AFSR 0x00000000.0000001c AFSR_EXT 0x00000002<L3_WDC> AFAR 0x00000020.1b7b4e00
Sep 4 09:44:17 sep21 Fault_PC 0x1023c8964 Esynd 0x001c /N0/SB1/P3/E0 J7400
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 654596 kern.info] [AFT0] errID 0x000472db.3855bbf0 Data Bit 11 was in error and corrected
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 171505 kern.info] [AFT2] errID 0x000472db.3855bbf0 E$tag PA=0x000000a1.7e7b4e00 does not match AFAR=0x00000020.1b7b4e00
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 351869 kern.info] [AFT2] errID 0x000472db.3855bbf0 PA=0x000000a1.7e7b4e00
Sep 4 09:44:17 sep21 E$tag 0x00000142.fc004581 E$state_0 Shared
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x00000000.00000000 0xf8800000.00000000 ECC 0x104
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x00000000.ffffffff 0x00000000.00000000 ECC 0x138
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 171505 kern.info] [AFT2] errID 0x000472db.3855bbf0 E$tag PA=0x00000023.f47b4e00 does not match AFAR=0x00000020.1b7b4e00
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 351869 kern.info] [AFT2] errID 0x000472db.3855bbf0 PA=0x00000023.f47b4e00
Sep 4 09:44:17 sep21 E$tag 0x00000047.e8004584 E$state_0 Modified
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x00000000.00000000 0x00000000.00000005 ECC 0x05c
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x00000000.0151fcb0 0x0000000b.00000000 ECC 0x179
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00000000.00000210 0x00000023.2586d7e0 ECC 0x072
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x00000000.0104a8bc 0x00000000.00000000 ECC 0x08d
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 171505 kern.info] [AFT2] errID 0x000472db.3855bbf0 E$tag PA=0x00000005.62fb4e00 does not match AFAR=0x00000020.1b7b4e00
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 351869 kern.info] [AFT2] errID 0x000472db.3855bbf0 PA=0x00000005.62fb4e00
Sep 4 09:44:17 sep21 E$tag 0x0000000a.c5004581 E$state_0 Shared
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 171505 kern.info] [AFT2] errID 0x000472db.3855bbf0 E$tag PA=0x00000023.a57b4e00 does not match AFAR=0x00000020.1b7b4e00
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 351869 kern.info] [AFT2] errID 0x000472db.3855bbf0 PA=0x00000023.a57b4e00
Sep 4 09:44:17 sep21 E$tag 0x00000047.4a004581 E$state_0 Shared
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x00) 0x00000000.00000000 0x00000000.00000000 ECC 0x000
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x10) 0x00000000.00000000 0x00000004.d57b4e18 ECC 0x183
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x20) 0x00000004.d57b4e18 0x00000000.00000000 ECC 0x140
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 895151 kern.info] [AFT2] E$Data (0x30) 0x00000000.00000000 0x00000004.d57b4e38 ECC 0x10c
Sep 4 09:44:17 sep21 SUNW,UltraSPARC-IV+: [ID 809480 kern.info] [AFT2] errID 0x000472db.3855bbf0 L2$tag PA=0x00000043.670b4e00 does not match AFAR=0x00000020.1b7b4e00

continuation...
showchs -b
Component Status
RP0 Suspect
RP1 Suspect
RP2 Suspect
RP3 Suspect
testboard SB1
{N0/SB1/P2/C0} set_panther_rd_bypass_wr: cpuno 6 ctl_addr 00000000.00000030 val 37064778
.0c060301
{N0/SB1/P3/C0} set_panther_rd_bypass_wr: cpuno 7 ctl_addr 00000000.00000030 val 37064778
.0c060301
{N0/SB1/P0/C0} set_panther_rd_bypass_wr: cpuno 4 ctl_addr 00000000.00000030 val 37064778
.0c060301
{N0/SB1/P2/C0} Subtest: Memory DIMMs Init
{N0/SB1/P1/C0} set_panther_rd_bypass_wr: cpuno 5 ctl_addr 00000000.00000030 val 37064778
.0c060301
I have only posted selected part of testboard sb1. Please help me in getting into a conclusion
Edited by: ytamourt on Sep 21, 2010 4:52 AM

Similar Messages

  • System prefs constantly asks to be shut down and reopened on certain system prefs so cannot access

    System prefs constantly asks to be shut down and reopened on certain system prefs so cannot access. Any answers.

    There is a BootCamp specific forum, you may get the experts over there.
    https://discussions.apple.com/community/windows_software/boot_camp?view=discussi ons

  • How do I configure my system so that Oracle 10g properly shuts down and sta

    How do I configure my system so that Oracle 10g properly shuts down and starts up when I reboot my Solaris system?

    http://download.oracle.com/docs/cd/B19306_01/server.102/b15658/strt_stp.htm#sthref255

  • Two days ago, I loaded Light Room 6. Today I went back to Light Room 5. LR 6 corrupted an entire folder of images, and caused errors on my Raid 5 causing win 7 to run "Chk Dsk" and fix the errors to the operating system. LR 5 has not shut down for the las

    Two days ago, I loaded Light Room 6. Today I went back to Light Room 5. LR 6 corrupted an entire folder of images, and caused errors on my Raid 5 causing win 7 to run "Chk Dsk" and fix the errors to the operating system. LR 5 has not shut down for the last 5 hours. LR 6 has a serious bug. Anyone else experiencing this problem. Yesterday I was on tech support, waiting for 3 hours, finally they picked up and informed me there department was closing and someone else would call me on Monday. So, I'm working today and all day Sunday to make up for the down time using LR 6.
    I don't know if the bug exists in the program or the "Creative Cloud.
    Question: Does anyone know why if I bought Light Room 6 [NOT Light Room CC with the monthly rental], I have to enter my serial number if I want to use it?

    Entering the serial number is probably part of the registration process.
    Just out of curiosity, what were you doing on LR6 when the folder of images became corrupted?

  • HT5624 I was upgrading to the new operating system and my phone is now shut down.  How do I get it unlocked?

    I was upgrading to the new operating system and my phone is now shut down.  How do I get it unlocked?

    Open Safari and on the menu named Safari click Preferences. In the Preferences window, click General at the top. Set "New windows open with" and "New tabs open with" to "Top Sites."  You can leave the Homepage setting as it is (e.g. Google), but nothing will open to the Homepage unless you have a Home icon in the toolbar and click on it.

  • Hi, 3 weeks ago i just got my iphone4 for and then i upgraded it to iOS5..am just wondrin', does changing of the iOS causes the phone to shuts down automatically and turn on again? thanks.. =)

    hi, 3 weeks ago i just got my iphone4 for and then i upgraded it to iOS5..am just wondrin', does changing or upgrading the OS causes the phone to shuts down automatically and turn on again? thanks.. =)

    How long are you leaving it on the charger?
    Are you connecting it directly to an electrical outlet or trying to charge via USB?  USB may not provide enough power to adequately charge the device if the battery is that low.
    If none of that helps, then the only option would be a warranty replacement as either the battery or system board is bad.

  • Pxi655x automatic shut down due to over temperatur​e

    I have a PXI-1045 chassis with the following pxi boards installed,
    1. PXI 6602 x 1
    2. pxi 6534 x 3
    3. pix5411 x 1
    4. pxi4070 x 1
    The whole system works fine, however after I installed 3 pxi 6551 in the pxi chassis, I always encounter the problem that the pxi 6551 boards will shut down automatically due to over temperature, and the message showed that I need to switch the system off. Has anyone come across similar problem? Sometimes it happens even when I have not run any LabVIEW programme...Could anyone give me some advice?

    It sounds like you have a pretty full chassis but I don't see anything that should cause an immediate thermal shutdown.  Here are a few things to check:
    1 - Is your chassis operating at room temperature (ie 27 C)?
    2 - Are your PXI chassis fans on and unimpeded?  If not make sure they are on "High".  Also make sure the filters on the chassis fans are clean and there is air space behind the chassis to allow air flow. 
    3 - Are your 655x boards in adjacent slots?  If so try spacing them out or putting your other boards between them.  This should reduce the concentration of heat in your chassis.  Also verify that any unused PXI slots are covered with slot blocking (blank) panels.  This maintains ideal airflow inside of the chassis.
    4 - Do the three 655x boards work when they are the only devices in the chassis?
    The thermal shutdown is meant to prevent the 655x from operating outside of its legal thermal range.  This guarantees the device specifications can be met and ensures the product won't fail due to overtemperature.
    -RB

  • WebLogic server is shut down automatically

              After i install weblogic6.1 and run default server, I got the fowllowing message
              and then server is shut down automatically, I tried it days before, and it works,
              why not work now?
              Thanks in advance!
              moonriver
              <Nov 6, 2001 11:40:53 PM EST> <Notice> <Management> <Starting discovery of Managed
              Server... This feature is on by default, you may turn this off by passing -Dweblogic.management.discover=false>
              <Nov 6, 2001 11:40:58 PM EST> <Notice> <Management> <Application Poller not started
              for production server.>
              <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
              server socket for port: 7002. java.net.BindException: Address in use: JVM_Bind
              Perhaps another process is using port 7002.>
              <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <The WebLogic Server
              is no longer listening for connections. You should probably restart it.>
              <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
              requested by system>
              <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
              has been initiated.>
              <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
              server socket for port: 7001. java.net.BindException: Address in use: JVM_Bind
              Perhaps another process is using port 7001.>
              <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
              requested by system>
              <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
              has been initiated.>
              <Nov 6, 2001 11:41:58 PM EST> <Notice> <WebLogicServer> <Started WebLogic AdminServer
              "myserver" for domain "mydomain" running in Production Mode>
              

    Most likely you have another WebLogic instance already listening on 7001.
              Moonriver Sun <[email protected]> wrote:
              > After i install weblogic6.1 and run default server, I got the fowllowing message
              > and then server is shut down automatically, I tried it days before, and it works,
              > why not work now?
              > Thanks in advance!
              > moonriver
              > -----------------
              > <Nov 6, 2001 11:40:53 PM EST> <Notice> <Management> <Starting discovery of Managed
              > Server... This feature is on by default, you may turn this off by passing -Dweblogic.management.discover=false>
              > <Nov 6, 2001 11:40:58 PM EST> <Notice> <Management> <Application Poller not started
              > for production server.>
              > <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
              > server socket for port: 7002. java.net.BindException: Address in use: JVM_Bind
              > Perhaps another process is using port 7002.>
              > <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <The WebLogic Server
              > is no longer listening for connections. You should probably restart it.>
              > <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
              > requested by system>
              > <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
              > has been initiated.>
              > <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
              > server socket for port: 7001. java.net.BindException: Address in use: JVM_Bind
              > Perhaps another process is using port 7001.>
              > <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
              > requested by system>
              > <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
              > has been initiated.>
              > <Nov 6, 2001 11:41:58 PM EST> <Notice> <WebLogicServer> <Started WebLogic AdminServer
              > "myserver" for domain "mydomain" running in Production Mode>
              Dimitri
              

  • WebLogic server is shut down automatically(in win2k pro)

    After i install weblogic6.1 and run default server, I got the fowllowing message
    and then server is shut down automatically, I tried it days before, and it works,
    why not work now?
    Thanks in advance!
    moonriver
    <Nov 6, 2001 11:40:53 PM EST> <Notice> <Management> <Starting discovery of Managed
    Server... This feature is on by default, you may turn this off by passing -Dweblogic.management.discover=false>
    <Nov 6, 2001 11:40:58 PM EST> <Notice> <Management> <Application Poller not started
    for production server.>
    <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
    server socket for port: 7002. java.net.BindException: Address in use: JVM_Bind
    Perhaps another process is using port 7002.>
    <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <The WebLogic Server
    is no longer listening for connections. You should probably restart it.>
    <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
    requested by system>
    <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
    has been initiated.>
    <Nov 6, 2001 11:40:58 PM EST> <Emergency> <WebLogicServer> <Unable to create a
    server socket for port: 7001. java.net.BindException: Address in use: JVM_Bind
    Perhaps another process is using port 7001.>
    <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <Server shutdown has been
    requested by system>
    <Nov 6, 2001 11:40:58 PM EST> <Alert> <WebLogicServer> <The shutdown sequence
    has been initiated.>
    <Nov 6, 2001 11:41:58 PM EST> <Notice> <WebLogicServer> <Started WebLogic AdminServer
    "myserver" for domain "mydomain" running in Production Mode>

    [att1.html]

  • QuickTime Player Shut Down Automatically!!!!!!?

    Recently I purchased the new iMac 27 inch late 2012 with OS X 10.8.4.
    Later on, I learned that there is something wrong with QuickTime Player.
    Every time when I tried to play a MP4 video, QuickTime Player shut down automatically.
    I also cannot create new video, audio, and screen recording.
    When I ever tried it, it again shut down by itself.
    I saved the error message in TextEdit, and shared it here.
    Feel free to take a look, and see if anyone know how to fix it.
    Thank you~

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs.  The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2.

  • Mac Shutting down automatically when not in use for awhile

    Please excuse my non techinical explanation of this problem !
    Model: Macbook Pro5,1
    OSX 10.5.7
    2.4 GHZ intel core 2 duo
    2GB 1067 Mhz DDR3
    Im first time mac owner and have very little technical ability ... !
    Problem:
    Laptop shuts down automatically if idle for about ten minutes ... this time can vary.
    Prior to this happening it makes alarming noises which appear to come from the on/off button area. Initially I thought it was a CD banging ... but its not that.
    This is the extent of my diagnostics at this stage! I have limited warranty on (based in Ireland) was planning on getting extended apple care warranty only last week ... not sure should i still get the extended warranty now I know this problem exists, cant find apple service centre in Dublin and not sure if I would be covered under limited warranty.
    Any advice would be appreciated
    thanks

    Hi Bibii and welcome to Discussions,
    first of, you have posted in the Mac Pro section not the MacBook Pro section here http://discussions.apple.com/category.jspa?categoryID=190
    Anyway, is this really a shutdown or is it just sleeping ?
    If sleeping check the Energy Savings settings in the System Preferences for when your MBP should go to sleep when inactive.
    Regards
    Stefan

  • Laptop shutting down automatically or sometimes showing fatal error.. please help

    hello guys,
    i have been using Hp pavilion dv5- 1103ax laptop for last 17months but now i have been having problem in it. my laptop shutting down automatically or sometimes showing fatal error due to physical memory dump.
    i thought because its got AMD Turion processor it might be heated up so its shutting itself down.. but now its getting off in 10minutes time or if i play a video in youtube or an avi file in system its switching off in the next minute..
    i just want to know what could be the problem and what should i do.
    please help me with this..
    regards ,
    venkat..

    Does the laptop also shut down from safe mode ?
    If yes, the perform hard drive self test to figure out whether it is a hardware or software issue .
    Plug in the ac adapter and remove all external device . Then, perform following steps to perform hard drive self test .
    1. Turn on/ Restart the laptop and keep tapping f10 key until bios set up screen appears .
    2. Select Tools/Diagnosis option using up or down arrow key.
    3. Select hard drive self test option.
    4. Run primary hard drive test .

  • My pro 13" with retina display is shutting down automatically? what to do

    Hey Uers
    My macbook pro 13" retina display is shutting down automatically and it restarts itself. What should i do on this????

    error message is as following
    Interval Since Last Panic Report:  26394 sec
    Panics Since Last Report:          1
    Anonymous UUID: F6E478C6-625A-62C2-31D5-6929592F4CAC
    Fri Jul 12 23:05:17 2013
    panic(cpu 2 caller 0xffffff80234b8655): Kernel trap at 0x0000000000003000, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000003000, CR3: 0x0000000025788000, CR4: 0x00000000001606e0
    RAX: 0xffffff8037122e00, RBX: 0xffffff80f563f000, RCX: 0x0000000000000007, RDX: 0xffffff803662f000
    RSP: 0xffffff81136abb58, RBP: 0xffffff81136abb70, RSI: 0x00000000e0000010, RDI: 0xffffff8036ef5580
    R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff81136abc30, R11: 0x0000000055bf2601
    R12: 0xffffff80367a05c0, R13: 0x00000000e0000010, R14: 0x0000000000000007, R15: 0xffffff803662f000
    RFL: 0x0000000000010282, RIP: 0x0000000000003000, CS:  0x0000000000000008, SS:  0x0000000000000000
    Fault CR2: 0x0000000000003000, Error code: 0x0000000000000010, Fault CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff81136ab7f0 : 0xffffff802341d626
    0xffffff81136ab860 : 0xffffff80234b8655
    0xffffff81136aba30 : 0xffffff80234ce17d
    0xffffff81136aba50 : 0x3000
    0xffffff81136abb70 : 0xffffff802382e67a
    0xffffff81136abbd0 : 0xffffff802382e993
    0xffffff81136abbf0 : 0xffffff8023829bd9
    0xffffff81136abc30 : 0xffffff802382e7e2
    0xffffff81136abc60 : 0xffffff802382e959
    0xffffff81136abca0 : 0xffffff8023830204
    0xffffff81136abcf0 : 0xffffff8023847501
    0xffffff81136abd30 : 0xffffff802383063b
    0xffffff81136abd70 : 0xffffff802382f86a
    0xffffff81136abdd0 : 0xffffff802382f667
    0xffffff81136abe10 : 0xffffff802382f417
    0xffffff81136abe80 : 0xffffff80238307cc
    0xffffff81136abe90 : 0xffffff7fa3c2005b
    0xffffff81136abec0 : 0xffffff7fa3d8e282
    0xffffff81136abf00 : 0xffffff7fa3d8e6ea
    0xffffff81136abf40 : 0xffffff7fa3d8d454
    0xffffff81136abf60 : 0xffffff802343e25e
    0xffffff81136abfb0 : 0xffffff80234b3137
          Kernel Extensions in backtrace:
    com.apple.iokit.IOUSBFamily(5.6)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffffff 7fa3c0c000->0xffffff7fa3c67fff
    dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa3a68000
    com.apple.driver.AppleUSBHub(5.5.5)[0216C905-64A9-35D3-B1FD-75F99AA21089]@0xfff fff7fa3d83000->0xffffff7fa3d97fff
    dependency: com.apple.iokit.IOUSBFamily(5.6.0)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffff ff7fa3c0c000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    12E55
    Kernel version:
    Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
    Kernel slide: 0x0000000023200000
    Kernel text base: 0xffffff8023400000
    System model name: MacBookPro10,2 (Mac-AFD8A9D944EA4843)
    System uptime in nanoseconds: 19518732480
    last loaded kext at 5290120103: com.apple.iokit.IOBluetoothSerialManager   4.1.4f2 (addr 0xffffff7fa4060000, size 57344)
    loaded kexts:
    com.avast.PacketForwarder 1.3
    com.avast.AvastFileShield     2.0.0
    com.huawei.driver.HuaweiDataCardACMData      4.08.00
    com.apple.iokit.IOBluetoothSerialManager            4.1.4f2
    com.apple.driver.AudioAUUC           1.60
    com.apple.filesystems.autofs            3.0
    com.apple.driver.AGPM        100.12.87
    com.apple.driver.ApplePlatformEnabler    2.0.6d1
    com.apple.driver.AppleMikeyHIDDriver     122
    com.apple.driver.X86PlatformShim            1.0.0
    com.apple.driver.AppleHDAHardwareConfigDriver          2.3.7fc4
    com.apple.driver.AppleHDA 2.3.7fc4
    com.apple.iokit.IOUserEthernet       1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X      7.0.0
    com.apple.driver.AppleMikeyDriver           2.3.7fc4
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.ApplePolicyControl          3.4.5
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleBacklight     170.2.5
    com.apple.driver.AppleMCCSControl          1.1.11
    com.apple.driver.AppleIntelHD4000Graphics       8.1.2
    com.apple.driver.AppleIntelFramebufferCapri     8.1.2
    com.apple.driver.AppleWWANSupport1    2.7.2
    com.apple.driver.AppleSMCLMU     2.0.3d0
    com.apple.driver.AppleSMCPDRC   1.0.0
    com.apple.driver.AppleMuxControl            3.4.5
    com.apple.iokit.IOBluetoothUSBDFU           4.1.4f2
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport            4.1.4f2
    com.apple.driver.AppleLPC  1.6.0
    com.apple.driver.SMCMotionSensor           3.0.3d1
    com.apple.driver.AppleUSBTCButtons        237.1
    com.apple.iokit.SCSITaskUserClient            3.5.5
    com.apple.driver.AppleUSBTCKeyEventDriver     237.1
    com.apple.driver.AppleUSBTCKeyboard    237.1
    com.apple.driver.AppleWWANSupport      2.7.2
    com.apple.driver.AppleFileSystemDriver   3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless      1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib  1.0.0d1
    com.apple.BootCache            34
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage           2.3.1
    com.apple.driver.AppleUSBHub      5.5.5
    com.apple.driver.AppleUSBXHCI     5.6.0
    com.apple.driver.AppleSDXC           1.4.2
    com.apple.driver.AppleAHCIPort     2.5.2
    com.apple.driver.AirPort.Brcm4331           615.20.17
    com.apple.driver.AppleUSBEHCI     5.5.0
    com.apple.driver.AppleEFINVRAM  1.7
    com.apple.driver.AppleSmartBatteryManager      161.0.0
    com.apple.driver.AppleACPIButtons           1.7
    com.apple.driver.AppleRTC  1.5
    com.apple.driver.AppleHPET           1.8
    com.apple.driver.AppleSMBIOS       1.9
    com.apple.driver.AppleACPIEC        1.7
    com.apple.driver.AppleAPIC            1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall   4.0.39
    com.apple.security.quarantine        2.1
    com.apple.driver.AppleIntelCPUPowerManagement        196.0.0
    com.apple.kext.triggers         1.0
    com.apple.driver.DspFuncLib          2.3.7fc4
    com.apple.iokit.IOAudioFamily         1.8.9fc11
    com.apple.kext.OSvKernDSPLib      1.6
    com.apple.iokit.IOSurface     86.0.4
    com.apple.iokit.IOBluetoothFamily  4.1.4f2
    com.apple.driver.AppleSMBusPCI   1.0.11d0
    com.apple.driver.IOPlatformPluginLegacy 1.0.0
    com.apple.driver.X86PlatformPlugin          1.0.0
    com.apple.driver.AppleHDAController        2.3.7fc4
    com.apple.iokit.IOHDAFamily           2.3.7fc4
    com.apple.driver.AppleThunderboltEDMSink       1.1.8
    com.apple.driver.AppleThunderboltEDMSource   1.1.8
    com.apple.driver.AppleThunderboltDPOutAdapter         1.8.9
    com.apple.driver.AppleSMBusController    1.0.11d0
    com.apple.iokit.IOAcceleratorFamily           74.5.1
    com.apple.iokit.IOSerialFamily         10.0.6
    com.apple.driver.AppleGraphicsControl     3.4.5
    com.apple.driver.AppleBacklightExpert     1.0.4
    com.apple.iokit.IONDRVSupport      2.3.7
    com.apple.iokit.IOGraphicsFamily    2.3.7
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport       4.1.4f2
    com.apple.driver.IOPlatformPluginFamily 5.3.0d51
    com.apple.driver.AppleSMC 3.1.4d2
    com.apple.iokit.IOSCSIBlockCommandsDevice       3.5.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice        3.5.5
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.driver.AppleUSBMultitouch       237.3
    com.apple.iokit.IOUSBHIDDriver     5.2.5
    com.apple.iokit.IOUSBMassStorageClass     3.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily   3.5.5
    com.apple.driver.AppleThunderboltDPInAdapter            1.8.9
    com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.9
    com.apple.driver.AppleThunderboltPCIDownAdapter     1.2.6
    com.apple.driver.AppleUSBMergeNub       5.5.5
    com.apple.driver.AppleUSBComposite        5.2.5
    com.apple.driver.AppleThunderboltNHI    1.7.8
    com.apple.iokit.IOThunderboltFamily         2.4.0
    com.apple.iokit.IOUSBUserClient     5.5.5
    com.apple.iokit.IOAHCIFamily          2.3.1
    com.apple.iokit.IO80211Family       530.4
    com.apple.iokit.IONetworkingFamily           3.0
    com.apple.iokit.IOUSBFamily            5.6.0
    com.apple.driver.AppleEFIRuntime            1.7
    com.apple.iokit.IOHIDFamily            1.8.1
    com.apple.iokit.IOSMBusFamily       1.1
    com.apple.security.sandbox 220.3
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet     7
    com.apple.driver.DiskImages           345
    com.apple.iokit.IOStorageFamily      1.8
    com.apple.driver.AppleKeyStore     28.21
    com.apple.driver.AppleACPIPlatform         1.7
    com.apple.iokit.IOPCIFamily 2.7.3
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto     1.0
    Model: MacBookPro10,2, BootROM MBP102.0106.B03, 2 processors, Intel Core i5, 2.5 GHz, 8 GB, SMC 2.6f57
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 768 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454255302D474E2D4620
    Me
    Interval Since Last Panic Report:  26394 sec
    Panics Since Last Report:          1
    Anonymous UUID: F6E478C6-625A-62C2-31D5-6929592F4CAC
    Fri Jul 12 23:05:17 2013
    panic(cpu 2 caller 0xffffff80234b8655): Kernel trap at 0x0000000000003000, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000003000, CR3: 0x0000000025788000, CR4: 0x00000000001606e0
    RAX: 0xffffff8037122e00, RBX: 0xffffff80f563f000, RCX: 0x0000000000000007, RDX: 0xffffff803662f000
    RSP: 0xffffff81136abb58, RBP: 0xffffff81136abb70, RSI: 0x00000000e0000010, RDI: 0xffffff8036ef5580
    R8: 0x0000000000000000, R9: 0x0000000000000000, R10: 0xffffff81136abc30, R11: 0x0000000055bf2601
    R12: 0xffffff80367a05c0, R13: 0x00000000e0000010, R14: 0x0000000000000007, R15: 0xffffff803662f000
    RFL: 0x0000000000010282, RIP: 0x0000000000003000, CS:  0x0000000000000008, SS:  0x0000000000000000
    Fault CR2: 0x0000000000003000, Error code: 0x0000000000000010, Fault CPU: 0x2
    Backtrace (CPU 2), Frame : Return Address
    0xffffff81136ab7f0 : 0xffffff802341d626
    0xffffff81136ab860 : 0xffffff80234b8655
    0xffffff81136aba30 : 0xffffff80234ce17d
    0xffffff81136aba50 : 0x3000
    0xffffff81136abb70 : 0xffffff802382e67a
    0xffffff81136abbd0 : 0xffffff802382e993
    0xffffff81136abbf0 : 0xffffff8023829bd9
    0xffffff81136abc30 : 0xffffff802382e7e2
    0xffffff81136abc60 : 0xffffff802382e959
    0xffffff81136abca0 : 0xffffff8023830204
    0xffffff81136abcf0 : 0xffffff8023847501
    0xffffff81136abd30 : 0xffffff802383063b
    0xffffff81136abd70 : 0xffffff802382f86a
    0xffffff81136abdd0 : 0xffffff802382f667
    0xffffff81136abe10 : 0xffffff802382f417
    0xffffff81136abe80 : 0xffffff80238307cc
    0xffffff81136abe90 : 0xffffff7fa3c2005b
    0xffffff81136abec0 : 0xffffff7fa3d8e282
    0xffffff81136abf00 : 0xffffff7fa3d8e6ea
    0xffffff81136abf40 : 0xffffff7fa3d8d454
    0xffffff81136abf60 : 0xffffff802343e25e
    0xffffff81136abfb0 : 0xffffff80234b3137
          Kernel Extensions in backtrace:
    com.apple.iokit.IOUSBFamily(5.6)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffffff 7fa3c0c000->0xffffff7fa3c67fff
    dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7fa3a68000
    com.apple.driver.AppleUSBHub(5.5.5)[0216C905-64A9-35D3-B1FD-75F99AA21089]@0xfff fff7fa3d83000->0xffffff7fa3d97fff
    dependency: com.apple.iokit.IOUSBFamily(5.6.0)[065077C5-A49E-3C52-BDC0-60169E293563]@0xffff ff7fa3c0c000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    12E55
    Kernel version:
    Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
    Kernel UUID: 896CB1E3-AB79-3DF1-B595-549DFFDF3D36
    Kernel slide: 0x0000000023200000
    Kernel text base: 0xffffff8023400000
    System model name: MacBookPro10,2 (Mac-AFD8A9D944EA4843)
    System uptime in nanoseconds: 19518732480
    last loaded kext at 5290120103: com.apple.iokit.IOBluetoothSerialManager   4.1.4f2 (addr 0xffffff7fa4060000, size 57344)
    loaded kexts:
    com.avast.PacketForwarder 1.3
    com.avast.AvastFileShield     2.0.0
    com.huawei.driver.HuaweiDataCardACMData      4.08.00
    com.apple.iokit.IOBluetoothSerialManager            4.1.4f2
    com.apple.driver.AudioAUUC           1.60
    com.apple.filesystems.autofs            3.0
    com.apple.driver.AGPM        100.12.87
    com.apple.driver.ApplePlatformEnabler    2.0.6d1
    com.apple.driver.AppleMikeyHIDDriver     122
    com.apple.driver.X86PlatformShim            1.0.0
    com.apple.driver.AppleHDAHardwareConfigDriver          2.3.7fc4
    com.apple.driver.AppleHDA 2.3.7fc4
    com.apple.iokit.IOUserEthernet       1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X      7.0.0
    com.apple.driver.AppleMikeyDriver           2.3.7fc4
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.driver.ApplePolicyControl          3.4.5
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleBacklight     170.2.5
    com.apple.driver.AppleMCCSControl          1.1.11
    com.apple.driver.AppleIntelHD4000Graphics       8.1.2
    com.apple.driver.AppleIntelFramebufferCapri     8.1.2
    com.apple.driver.AppleWWANSupport1    2.7.2
    com.apple.driver.AppleSMCLMU     2.0.3d0
    com.apple.driver.AppleSMCPDRC   1.0.0
    com.apple.driver.AppleMuxControl            3.4.5
    com.apple.iokit.IOBluetoothUSBDFU           4.1.4f2
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport            4.1.4f2
    com.apple.driver.AppleLPC  1.6.0
    com.apple.driver.SMCMotionSensor           3.0.3d1
    com.apple.driver.AppleUSBTCButtons        237.1
    com.apple.iokit.SCSITaskUserClient            3.5.5
    com.apple.driver.AppleUSBTCKeyEventDriver     237.1
    com.apple.driver.AppleUSBTCKeyboard    237.1
    com.apple.driver.AppleWWANSupport      2.7.2
    com.apple.driver.AppleFileSystemDriver   3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless      1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib  1.0.0d1
    com.apple.BootCache            34
    com.apple.driver.XsanFilter 404
    com.apple.iokit.IOAHCIBlockStorage           2.3.1
    com.apple.driver.AppleUSBHub      5.5.5
    com.apple.driver.AppleUSBXHCI     5.6.0
    com.apple.driver.AppleSDXC           1.4.2
    com.apple.driver.AppleAHCIPort     2.5.2
    com.apple.driver.AirPort.Brcm4331           615.20.17
    com.apple.driver.AppleUSBEHCI     5.5.0
    com.apple.driver.AppleEFINVRAM  1.7
    com.apple.driver.AppleSmartBatteryManager      161.0.0
    com.apple.driver.AppleACPIButtons           1.7
    com.apple.driver.AppleRTC  1.5
    com.apple.driver.AppleHPET           1.8
    com.apple.driver.AppleSMBIOS       1.9
    com.apple.driver.AppleACPIEC        1.7
    com.apple.driver.AppleAPIC            1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.nke.applicationfirewall   4.0.39
    com.apple.security.quarantine        2.1
    com.apple.driver.AppleIntelCPUPowerManagement        196.0.0
    com.apple.kext.triggers         1.0
    com.apple.driver.DspFuncLib          2.3.7fc4
    com.apple.iokit.IOAudioFamily         1.8.9fc11
    com.apple.kext.OSvKernDSPLib      1.6
    com.apple.iokit.IOSurface     86.0.4
    com.apple.iokit.IOBluetoothFamily  4.1.4f2
    com.apple.driver.AppleSMBusPCI   1.0.11d0
    com.apple.driver.IOPlatformPluginLegacy 1.0.0
    com.apple.driver.X86PlatformPlugin          1.0.0
    com.apple.driver.AppleHDAController        2.3.7fc4
    com.apple.iokit.IOHDAFamily           2.3.7fc4
    com.apple.driver.AppleThunderboltEDMSink       1.1.8
    com.apple.driver.AppleThunderboltEDMSource   1.1.8
    com.apple.driver.AppleThunderboltDPOutAdapter         1.8.9
    com.apple.driver.AppleSMBusController    1.0.11d0
    com.apple.iokit.IOAcceleratorFamily           74.5.1
    com.apple.iokit.IOSerialFamily         10.0.6
    com.apple.driver.AppleGraphicsControl     3.4.5
    com.apple.driver.AppleBacklightExpert     1.0.4
    com.apple.iokit.IONDRVSupport      2.3.7
    com.apple.iokit.IOGraphicsFamily    2.3.7
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport       4.1.4f2
    com.apple.driver.IOPlatformPluginFamily 5.3.0d51
    com.apple.driver.AppleSMC 3.1.4d2
    com.apple.iokit.IOSCSIBlockCommandsDevice       3.5.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice        3.5.5
    com.apple.iokit.IOBDStorageFamily 1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily 1.7.1
    com.apple.driver.AppleUSBMultitouch       237.3
    com.apple.iokit.IOUSBHIDDriver     5.2.5
    com.apple.iokit.IOUSBMassStorageClass     3.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily   3.5.5
    com.apple.driver.AppleThunderboltDPInAdapter            1.8.9
    com.apple.driver.AppleThunderboltDPAdapterFamily    1.8.9
    com.apple.driver.AppleThunderboltPCIDownAdapter     1.2.6
    com.apple.driver.AppleUSBMergeNub       5.5.5
    com.apple.driver.AppleUSBComposite        5.2.5
    com.apple.driver.AppleThunderboltNHI    1.7.8
    com.apple.iokit.IOThunderboltFamily         2.4.0
    com.apple.iokit.IOUSBUserClient     5.5.5
    com.apple.iokit.IOAHCIFamily          2.3.1
    com.apple.iokit.IO80211Family       530.4
    com.apple.iokit.IONetworkingFamily           3.0
    com.apple.iokit.IOUSBFamily            5.6.0
    com.apple.driver.AppleEFIRuntime            1.7
    com.apple.iokit.IOHIDFamily            1.8.1
    com.apple.iokit.IOSMBusFamily       1.1
    com.apple.security.sandbox 220.3
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet     7
    com.apple.driver.DiskImages           345
    com.apple.iokit.IOStorageFamily      1.8
    com.apple.driver.AppleKeyStore     28.21
    com.apple.driver.AppleACPIPlatform         1.7
    com.apple.iokit.IOPCIFamily 2.7.3
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto     1.0
    Model: MacBookPro10,2, BootROM MBP102.0106.B03, 2 processors, Intel Core i5, 2.5 GHz, 8 GB, SMC 2.6f57
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 768 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454255302D474E2D4620
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454255302D474E2D4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x10F), Broadcom BCM43xx 1.0 (5.106.98.100.17)
    Bluetooth: Version 4.1.4f2 12041, 2 service, 11 devices, 1 incoming serial ports
    Serial ATA Device: APPLE SSD SD128E, 121.33 GB
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2512, 0x1d180000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0259, 0x1d182000 / 5
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x828c, 0x1d181300 / 6
    mory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x02FE, 0x45424A3831554738454255302D474E2D4620
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x10F), Broadcom BCM43xx 1.0 (5.106.98.100.17)
    Bluetooth: Version 4.1.4f2 12041, 2 service, 11 devices, 1 incoming serial ports
    Serial ATA Device: APPLE SSD SD128E, 121.33 GB
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2512, 0x1d180000 / 3
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0259, 0x1d182000 / 5
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x828c, 0x1d181300 / 6

  • IMovie required an update, now it is shutting down automatically. Please help.

    iMovie required an update, now it is shutting down automatically. Please Help.

    To stop Auto updates use: '''Tools -> Options -> Advanced -> Update Tab ''' <br> select the options you require ( see [[Updating Firefox]] )
    As for why your version does not work I do not know but suggest you look at:
    * [[Safe Mode]] Note when using safe mode do not make changes on the first dialogue Window you see; click the Continue button
    * [[Basic Troubleshooting]]
    You may also need to review the versions of Java see
    * [[Using the Java plugin with Firefox]]
    * "Why do I need Java 6 Update 10 and above for Firefox 3.6 and later versions? " - http://www.java.com/en/download/faq/firefox_newplugin.xml
    Your System details show you as using version 3.6.12 of Firefox, that is not the latest version, it would be normal practice to update to the latest version, which is why you are being offered the updates. See also [[Software Update Failed]]

  • WebLogic Server shutting down Automatically

    The WebLogic Server is shutting down automatically after few hrs(7-8) with the following message:
    <*Dec 1, 2008 11:45:08 AM EST> <Notice> <WebLogicServer> <BEA-000388> <JVM called WLS shutdown hook. The server will force shutdown now>*
    *<Dec 1, 2008 11:45:08 AM EST> <Alert> <WebLogicServer> <BEA-000396> <Server shutdown has been requested by <WLS Kernel>>*
    *<Dec 1, 2008 11:45:08 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SUSPENDING>*
    *<Dec 1, 2008 11:45:08 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>*
    *<Dec 1, 2008 11:45:08 AM EST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>*
    *<Dec 1, 2008 11:45:08 AM EST> <Notice> <Server> <BEA-002607> <Channel "Default[1]" listening on 127.0.0.1:9401 was shutdown.>*
    *<Dec 1, 2008 11:45:08 AM EST> <Notice> <Server> <BEA-002607> <Channel "Default" listening on 10.167.19.113:9401 was shutdown.>*
    *(preStop) Beginning PegaRULES shutdown...*
    What might be wrong..Please help
    We are using WebLogic9.2

    There is nothing significant in the log ..no exceptions/warnings.We are starting the weblogic on UNIX remote machine and logging is done to nohup.out.Below is the startWebLogic.sh
    Also,The server is not shutting when I logout from telnet session after executing the start script.
    *#!/bin/sh*
    *# WARNING: This file is created by the Configuration Wizard.*
    *# Any changes to this script may be lost when adding extensions to this configuration.*
    *# --- Start Functions ---*
    stopAll()
    *     # We separate the stop commands into a function so we are able to use the trap command in Unix (calling a function) to stop these services*
    *     if [ "X${ALREADY_STOPPED}" != "X" ] ; then*
    *          exit*
    *     fi*
    *     # STOP POINTBASE (only if we started it)*
    *     if [ "${POINTBASE_FLAG}" = "true" ] ; then*
    *          echo "Stopping PointBase server..."*
    *          ${WL_HOME}/common/bin/stopPointBase.sh -port=${POINTBASE_PORT} -name=${POINTBASE_DBNAME} >"${DOMAIN_HOME}/pointbaseShutdown.log" 2>&1*
    *          echo "PointBase server stopped."*
    *     fi*
    *     ALREADY_STOPPED="true"*
    *     # Restore IP configuration the node manager starts IP Migration*
    *     if [ "${SERVER_IP}" != "" ] ; then*
    *          ${WL_HOME}/common/bin/wlsifconfig.sh -removeif "${IFNAME}" "${SERVER_IP}"*
    *     fi*
    *# --- End Functions ---*
    *# This script is used to start WebLogic Server for this domain.*
    *# To create your own start script for your domain, you can initialize the*
    *# environment by calling @USERDOMAINHOME/setDomainEnv.*
    *# setDomainEnv initializes or calls commEnv to initialize the following variables:*
    *# BEA_HOME - The BEA home directory of your WebLogic installation.*
    *# JAVA_HOME - Location of the version of Java used to start WebLogic*
    *# Server.*
    *# JAVA_VENDOR - Vendor of the JVM (i.e. BEA, HP, IBM, Sun, etc.)*
    *# PATH - JDK and WebLogic directories are added to system path.*
    *# WEBLOGIC_CLASSPATH*
    *# - Classpath needed to start WebLogic Server.*
    *# PATCH_CLASSPATH - Classpath used for patches*
    *# PATCH_LIBPATH - Library path used for patches*
    *# PATCH_PATH - Path used for patches*
    *# WEBLOGIC_EXTENSION_DIRS - Extension dirs for WebLogic classpath patch*
    *# JAVA_VM - The java arg specifying the VM to run. (i.e.*
    *# - server, -hotspot, etc.)*
    *# USER_MEM_ARGS - The variable to override the standard memory arguments*
    *# passed to java.*
    *# PRODUCTION_MODE - The variable that determines whether Weblogic Server is started in production mode.*
    *# POINTBASE_HOME - Point Base home directory.*
    *# POINTBASE_CLASSPATH*
    *# - Classpath needed to start PointBase.*
    *# Other variables used in this script include:*
    *# SERVER_NAME - Name of the weblogic server.*
    *# JAVA_OPTIONS - Java command-line options for running the server. (These*
    *# will be tagged on to the end of the JAVA_VM and*
    *# MEM_ARGS)*
    *# For additional information, refer to the WebLogic Server Administration*
    *# Console Online Help(http://e-docs.bea.com/wls/docs92/ConsoleHelp/startstop.html).*
    *# Call setDomainEnv here.*
    *DOMAIN_HOME="/apps/bea/user_projects/domains/SAM1"*
    *. ${DOMAIN_HOME}/bin/setDomainEnv.sh $**
    *SAVE_JAVA_OPTIONS="${JAVA_OPTIONS}"*
    *SAVE_CLASSPATH="${CLASSPATH}"*
    *# Start PointBase*
    *PB_DEBUG_LEVEL="0"*
    *if [ "${POINTBASE_FLAG}" = "true" ] ; then*
    *     ${WL_HOME}/common/bin/startPointBase.sh -port=${POINTBASE_PORT} -debug=${PB_DEBUG_LEVEL} -console=false -background=true -ini=${DOMAIN_HOME}/pointbase.ini >"${DOMAIN_HOME}/pointbase.log" 2>&1*
    fi
    *JAVA_OPTIONS="${SAVE_JAVA_OPTIONS}"*
    *SAVE_JAVA_OPTIONS=""*
    *CLASSPATH="${SAVE_CLASSPATH}"*
    *SAVE_CLASSPATH=""*
    *trap 'stopAll' 1 2 3 15*
    *if [ "${PRODUCTION_MODE}" = "true" ] ; then*
    *     WLS_DISPLAY_MODE="Production"*
    else
    *     WLS_DISPLAY_MODE="Development"*
    fi
    *if [ "${WLS_USER}" != "" ] ; then*
    *     JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.username=${WLS_USER}"*
    *fi*
    *if [ "${WLS_PW}" != "" ] ; then*
    *     JAVA_OPTIONS="${JAVA_OPTIONS} -Dweblogic.management.password=${WLS_PW}"*
    fi
    *CLASSPATH="${CLASSPATH}${CLASSPATHSEP}${MEDREC_WEBLOGIC_CLASSPATH}"*
    *echo "."*
    *echo "."*
    *echo "JAVA Memory arguments: ${MEM_ARGS}"*
    *echo "."*
    *echo "WLS Start Mode=${WLS_DISPLAY_MODE}"*
    *echo "."*
    *echo "CLASSPATH=${CLASSPATH}"*
    *echo "."*
    *echo "PATH=${PATH}"*
    *echo "."*
    *echo "***************************************************"*
    *echo "* To start WebLogic Server, use a username and *"*
    *echo "* password assigned to an admin-level user. For *"*
    *echo "* server administration, use the WebLogic Server *"*
    *echo "* console at http://hostname:port/console *"*
    *echo "***************************************************"*
    *# Set up IP Migration related variables.*
    *# Set interface name.*
    *if [ "${Interface}" != "" ] ; then*
    *     IFNAME="${Interface}"*
    else
    *     IFNAME=""*
    fi
    *# Set IP Mask.*
    *if [ "${NetMask}" != "" ] ; then*
    *     IPMASK="${NetMask}"*
    *else*
    *     IPMASK=""*
    *fi*
    *# Perform IP Migration if SERVER_IP is set by node manager.*
    *if [ "${SERVER_IP}" != "" ] ; then*
    *     ${WL_HOME}/common/bin/wlsifconfig.sh -addif "${IFNAME}" "${SERVER_IP}" "${IPMASK}"*
    fi
    *# START WEBLOGIC*
    echo "starting weblogic with Java version:"
    *${JAVA_HOME}/bin/java ${JAVA_VM} -version*
    *if [ "${WLS_REDIRECT_LOG}" = "" ] ; then*
    *     echo "Starting WLS with line:"*
    *     echo "${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${PROXY_SETTINGS} ${SERVER_CLASS}"*
    *     nohup ${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${PROXY_SETTINGS} ${SERVER_CLASS} &*
    *else*
    *     echo "Redirecting output from WLS window to ${WLS_REDIRECT_LOG}"*
    *     nohup ${JAVA_HOME}/bin/java ${JAVA_VM} ${MEM_ARGS} ${JAVA_OPTIONS} -Dweblogic.Name=${SERVER_NAME} -Djava.security.policy=${WL_HOME}/server/lib/weblogic.policy ${PROXY_SETTINGS} ${SERVER_CLASS} >"${WLS_REDIRECT_LOG}" 2>&1 &*
    *fi*
    *#stopAll*
    *#popd*
    *# Exit this script only if we have been told to exit.*
    *if [ "${doExitFlag}" = "true" ] ; then*
    *     exit*
    fi

Maybe you are looking for

  • Business Catalyst Log in form via AJAX

    Hi guys I am trying to avoid the standard form redirection of Business Catalyst to a more customisable style but I cant get it to respond properly. Here is my code: $("#login-form").submit(function(e) {         e.preventDefault();         $.ajax({   

  • Host controler usb connectivity

     usbxhci.inf lost my usb conntctivity error 43 host conttoler windows 7 help

  • Value in CFQUERYPARAM

    I'm cleaning up some codes and start using <cfqueryparam> tags in all the queries. There is one query that I'm not 100% sure how to convert to cfqueryparam : INSERT INTO sometable (Column_1,Column_2, .......) VALUES ( '#Value_1#', '#Value_2# #Value_3

  • TMG events and raising an error message

    I have written the code in TMG events and raising an error message for a certain condition.Whenever the error message is getting triggered it is making all the fields read only.So the user is not be able to change the value. Any Solutions Please.?

  • Regarding update of a nokia 6300

    I just started the update over the air , but can anyone tell me what is the size of the firmware? v 5.50 ? and after it downloads the update can i install it later on when the phone will be charged at full capacity in order to work properly ? Thanks,