System break down after installing new version

Today I connected my ipod touch (3rd g) to my computer. iTunes told me, that there is a new version (ios 5) and i want to install it. During the installation my computer suddenly did not recognize the ipod an it could not be installed. Now on my ipod i see an icon, that i should connect my ipod with itunes. When I do this, Itunes tells me, that my Ipod has to be restored. I try to do this and it alle happens again, my computer do not see the Ipod. What can i do?
And sorry for my English

Connect it again to your computer and make sure that the security software does not block access to Apple servers during the update. iTunes for Windows: Troubleshooting security software issues
Also have a look at this article: iOS 5: Updating your device to iOS 5

Similar Messages

  • HT4623 my phone main button not working after installed new version software 7.0.6

    my phone main button not working after installed new version software 7.0.6

    Arrange some liquid like petrol spirit and w 40
    two drops in to home button.
    30 times press slowly slowly and then restart your apply iphone.
    You will get ready.
    I am sure. Thanking you...

  • Problems after installing new version o iphone 3gs

    I installed this evening the new version of my iphone 3gs and since then I cannot use my iphone nor reinitialise it beause it asks me to connect to itunes.When i connect it to the computer it say there is no pilot and doesnt manage to install a new pilot I telecharged the last version of itunes and reinstallated it, try again to reinstall the pilot but impossible to connect and I can't use my iphone
    Help me please

    A warm welcome Sabina!
    i wonder if the issue is the new battery (can that cause a slow down
    and malfunction of this sort).
    Not too likely at all.
    or if my HD is the problem.
    Very likely, I would expect all Laptop HDs 4 or more years old to be failing by now.
    i just read somewhere that whenever we do the updates we're supposed to do the permissions and i never knew to do that -- so i haven't ever done it. could that be the problem.
    That and Verifying or Repairing the HD are sort of like looking both ways before you cross the street, neither may be necessary to cross the street, but it certainly can prevent problems during the crossing!
    should i do a clean install of the system software and start from scratch.
    I really think the Internal HD is on it's way out, but if you have a good/complete backup, actually a bootable clone on an external Firewire Drive is preferable... Best way to get an exact bootable copy of your old drive to the new one is with Carbon Copy Cloner...
    http://www.bombich.com/software/ccc.html
    thoughts would be appreciated. i don't have the money to take it anywhere to be fixed or to buy new -- so any help is greatly appreciated.
    Without Money to replace the HD, you may be stuck booting off an external HD

  • Firefox previously worked fine but after installing new version does not open. Opens in the same day that I install it but not after restarting computer.

    I just installed the new version of firefox. My firefox worked fine with the previous version. But the new version only works on the day I install it but the next time i start my computer it does not work. It does not open after clicking the icon. I even uninstalled it and then reinstalled it but again the same thing happened. I have no idea about plug ins etc. but I did not install any new ones.

    This is a very interesting issue. Let's start with trying [[safe mode]], [[managing profiles|new profile]], and [http://firefox.com/all-older.html installing an older version] - if one of these works, please don't do the rest and reply here.

  • Service error after install newer version of itunes

    I just installed the newer version of itunes. now when I plug in my ipod it says service error...what the ****?

    You won't. Back them up anyway.
    (99241)

  • 4 hrs later - Computer shut down after installing new RAM (mid 2007 Imac)

    Mid 2007 imac and I installed new Ram. It worked for 4 hrs then the Imac shutdown. The pressed power button but no power. Unplugged and replugged the power cord and 3 beeps sounded. I am wondering if it worked for 4 hrs or so, then why did it would it fail 4 hrs later?
    I am running the correct ram because in system profiler under memory - it said that everything was ok.
    Any ideas?

    or maybe the back tray wasn't tight enough?
    I re-installed it now and so far so good.... I pressed tight and in an upwards motion. We'll see what happens

  • TS2755 Problem with receiving other's text messages after installing new version.

    I just installed the new version for my iPhone.  Subsequent to this, I started to receive a copy of my husband's text messages.  He did not receive a copy of mine.  We have the same iTunes account, however separate phone accounts.  I turned off and back on the phone . . . no change.  Has anyone run across this problem?

    That's because you both are using the same Apple ID.
    The only place to share Apple ID is
    Settings > iTunes & App Store > Apple ID: > shared Apple ID here.
    All other Apple services like iMessage, FaceTime, iCloud, etc... you both should have unique Apple ID.
    Check especially, Settings > Messages > Send & Receive > only your phone number is selected.

  • Can I delete older app. versions after installing newer versions?

    I recently downloaded and installed the newer versions of pages, numbers, and keynote.  Can I safely delete the older versions I had when I purchased iwork 09?  I'm trying to remove unneeded files.  Thanks!

    Hello Steve
    Yes you can, just drag the unwanted apps to the trash and empty it.
    OS X Mavericks: Install, update, and uninstall apps
    http://support.apple.com/kb/PH14299
    Regards,
    -Norm G.

  • SDM   resetting JCO destination after installing new version.

    Every time I reinstall a new version of netweaver developer, I have to edit each JCO destination in order to reset the password. Is there a way to reset password for more than one JCO destination ?
    Thanks, regards, peter

    I connect to two r/3 servers, but I have about 20 JCO destinations. I have to  reset the  r/3password for every connections by editing the JCO connection as explained in the document “WEB DYNPRO :about configuration  and Administration” by Timo Lakner , Jochen Guertler dated 2004-01-20 paragraph 3.6 “ Maintain JCO destinations defined by development component”  sub paragraph 3.6.3 “Edit existing JCO connection”.
    Thanks regards, peter

  • How to shut down after installing new OS?

    Hello,
    I am selling my MBP, so I used the Snow Leopard desk to "wipe" my data from the machine, and then I re-intalled OS 10.6. Now the computer is at the "welcome" screen as if it was just purchased at the store. It asks you to select your country, your languge, etc, and then it asks if you are restoring from a Time Machine backup or what exactly you'd like to do.
    My problem is (and I know this sounds stupid) I don't know how to turn the computer off now that it's as this "beginning" stage. It doees ot have the usual selections at the top of the screen (like the Apple Menu, etc), so I'm not sure what to do. For now, I just closed the lid and I'm hoping that it worked and it's currenlty sleeping.
    But I'd like to be able to shut the machine down so that I can ship it to the new buyer.
    Thanks for any help!
    PS: I also have the new iLife that I'd like to put on it (it had it before I wiped the data), but I can't figure out how to do that either. The machine is not setup for a user yet, and I don't want to mess it up for the person who is buying it. Is there anything I can do that will allow me to install it?

    wjosten wrote:
    Not a problem, my reply is directed at others that might view this thread.
    My reply was completely correct, other then ejecting the DVD. But then you really don't need to eject it as it is going with the computer anyway.
    You can always restart the system and then eject and then hold down the power button to shut the system down again. Once restarted it will go to the First screen again

  • Problems on shuting down after installing new PSU on a p6-2207ep

    Hi all, B4 explaining my problem I really dont know if i should post this in desktop hardware or in this section of freezes/hangs/ lockups thread but i think i is more fitting in here. My pc: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=c03382032 I bought a new PSU: XFX TS 550W 80PLUS BRONZE for the GPU upgrade R9 380 I was planning to do. Problems with the new power supply:
    When I closed windows 7 the first problem arose, the picture freezes on the screen that says "windows shuting down", I waited a bit and nothing, tried to turn off the power by keeping pressed the power button but nothing had to turn it off directly in the back switch of the PSU...  Second time happened soomething a little different, a few seconds after freezing again on the screen that says "windows shuting down"  the windows actually shut down and the screen turned off but all the rest inside the computer case continues running from the fans to the light of the on / off button and was also able to shut it down by keeping the pwoer button pressed...
    When I restart the computer he takes some time to shuts down, and only after a few seconds he turns on… Also tried the GPU with the new PSU fans worked but no input in screen which i just assumed some PSU problem. ATM i am in the process of an RMA waiting to know if it is a faulty PSU or not... Problems after reinstalling the original hardware: Some of the same porblems when i had the new PSU stayed namely: A few seconds after freezing again on the screen that says "windows shuting down"  the windows actually shut down and the screen turned off but all the rest inside the computer case continues running from the fans to the light of the on / off button and was also able to shut it down by keeping the pwoer button pressed...
    When I restart the computer he takes some time to shuts down, and only after a few seconds he turns on… What i have done so far to try correct the problem:Restore windows 7 to a point b4 the hardware installation.Reset BIOSHard resetClean BootDid a full checkdisk which means 0 kb in bad sectors...Did a full hardware check with HP software all tests passedDid a system file check everything fine What I fear the most is a faulty PSU that may have caused damage in my hardware mainly the motherboard but could be something else entirely.Could be that I need a specific BIOS for this motherboard / PSU combo but after returning to original Hardware the problems remained... What can I do given that i can only do software tests since I dont have an extra PC to test the parts...

    It worked !!! I thought i had already reseted the bios but seems like using the menu didnt do it. The computer is now working as b4 thx god it isnt some damage on my hardware !!! Should I now access BIOS and save to default again ? I set the time manually in windows dont know if that is the best way to go around it anyways I am going to search about it. Btw the PSU is XFX the GPU is from MSI. How should i proceed now,  should I keep with the RMA and make sure its not faulty or the problems that arose with it are all explained by problems in the BIOS and there is no reason to be afraid of the new PSU? Thx alot again !!!

  • System slow down after installing Mountain Lion OS

    I recently purchased a MacBook Pro for school, and upgraded the OS to Mountain Lion.  I noticed a slight slow down in the computer.  Is this normal, or is there something I can do to speed it back up?
    SW

    Your processor is alright however the specs on your machine are lackluster.  It has a slow drive and not enough ram.  Your first problem is that with that little ram the computer will use the drive for paging.  Since the drive is 5400 (the slowest hard drives in the world) your going to be waiting.. a lot.  Up your ram and upgrade to a 7200 rpm hard drive youll be happy.  If you really want a gem system upgrade to 8gb ram and get a swift SSD drive. 
    Its a technology problem, not an OS problem.  Newer OS's have extra features that capitalize on modern tech.. 5400rpm tech are like.. 90s tech...   Cant believe they were selling those right up to 2011 or whenever.. criminal...

  • Firefox will not update after installing new version

    I have repeatedly updated Firefox (both by updating and by uninstalling completely and re-installing a fresh copy of the latest version) and when I go to HELP > ABOUT FIREFOX it shows I have version 6.0.2
    BUT
    SEVERAL sites (including Mozilla.com) give me pop-up notices saying I am using an outdated version of Firefox and need to upgrade. Firefox on this PC even looks and acts different than it does, for example on my other Windows 7 PC (which also has v 6.0.2)
    HOW can I get Firefox to actually fully update itself and not only report that it's the latest version (I see that in the config it's reporting v 3.0.11) but to act like the latest version?
    Like I said, I have tried uninstalling it completely and installing a fresh copy downloaded from Mozilla.com.

    Your User Agent used to post with is Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.11) Gecko/2009060215 Firefox/3.0.11 FBSMTWB
    See https://support.mozilla.com/en-US/kb/new?title=Web+sites+or+add-ons+incorrectly+report+incompatible+browser
    Check the '''general.useragent''' prefs on the '''about:config''' page.
    You can open the '''about:config''' page via the Location (address) bar, just like you open a website.
    Filter: '''general.useragent'''
    If any '''general.useragent''' prefs are bold (user set) then right-click that pref and choose '''Reset'''.
    It may likely be due to the FBSMTWB on end of your useragent that the Fast Browser Search toolbar extension you have now or had and it added on to UA.

  • Z10 shutting down after installing new OS

    Since I installed the new OS on my Z10 my phone has been randomly shutting down and rebooting. Last night it shut down for more than an hour. It was if the phone were completely dead.

    http://supportforums.blackberry.com/t5/BlackBerry-10-Functions-and/How-to-Reload-your-Blackberry10-OS/td-p/2187545#nobanner 

  • Itunes not playing entire song after installing new version

    I installed Win7 Pro 64-bit and subsequently installed the latest version of iTunes.  Now iTunes is cutting off the last minute or so of my songs.  Why???

    i had this too, the only way I was able to solve it was to rebuild my library, ***** but is the only way.
    Most likely you will experience that new songs informations are no longer stored and it will run determination for gapless playback on every startup of iTunes!

Maybe you are looking for