System bug in file system (10,7)

After installing Lion, cannot place my files in alphbetical or numerical order in column view.  System will only use «last used» to file.
Can I go back to Snow Leopard Tried every preference possible and no «genious» at the Ottawa Apple store could figure a solution.
Answer? Wait for an update to the system...
This is not a problem on my Mini or my 13 inch (2011) portable, only my 15 inch Macbook Pro .
Is there something hidden somewhere in the preferences that no one knows about?
Thank you

The arrangement and the sort options are both in the same menu/toolbar button. To get Sort options, hold down the Option (alt) key when you click the Arrangement button or in the menus.
If you arrange by Name, there are not sort options available. If you set arrangement to None, you can pick a sort order.
If you Arrange by Application, Kind, or Label, you can sort by one of the other options.
For some odd reason I haven't been able to replicate, the sort order sometimes gets reversed, and there is no way to change it. But, it will eventually fix itself.
In List View, you can set the sort order like in Snow Leopard as long as you do not have an Arrangement set.
It's hard to understand unless you just play around with it.

Similar Messages

  • Problem with the EFI system partition's file system.

    I installed latest yosemite 10.10.2 update - did a verify disk on “WDC WD1001FALS-403AA0 Media” (internal HD on my iMac 21.5-inch, Mid 2011) and got
    Problems were found with the partition map which might prevent booting
    Error: The partition map needs to be repaired because there’s a problem with the EFI system partition’s file system.
    However a verify disk on the volume partition gets a clean bill of health!
    I haven't done a 'repair disk' yet. Thought I'd check if anybody else has same message first.
    Cheers

    I had issues where my MacPro 8-core would not boot after the 10.7.4 upgrade, but my MacBook Air 13" 2011 upgrade worked just fine.
    I had to restore my MacPro HD from my TimeMachine back up. Apparently, the Softraid raid drivers that I use on my MacPro are not compatible yet with 10.7.4. See here for more info:
    http://macperformanceguide.com/blog/2012/20120511_1-MacOSX-SoftRAID.html
    I contacted Softraid and they are already aware of the issues and are working with Apple for a fix.
    Cheers.
    Bud

  • MacBookPro SSD Error- ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.

    MacBook Pro OS x Mavericks. I have Sandisk 256GB SSD and I am getting a below error message.
    ALERT: The partition map needs to be repaired because there's a problem with the EFI system partition's file system.
    Does anyone know how to resolve this error and fix it ? unfortunately I don't have a Time Machine backup. Thanks!

    Have you tried to run the verify/repair permissions and verify/repair disk through the recovery disk? If that didn't work then I would reinstall the OS after backing up. If that still doesn't work I would take it in.

  • How adutilities comes to know that the file system is shared file system

    How adutilities comes to know that the file system is shared file system ?
    In multinode shared file system : if we want genearte message file we can invoke adadmin from any node and perform this activity. In this case, how adadmin knows that the filesystem is shared filesystem.

    Duplicate post.
    How adutilities comes to know that the file system is shared file system
    How adutilities comes to know that the file system is shared file system

  • How to make bank management system using java file system

    Hi, I have some fields
    1.ID
    2. Deposite
    3. Withdraw
    4. Balance
    Now how can i manage this Bank Management System using java file system.
    Thanks in advance.

    Then we're back to (1): Do your own homework. Google has zillions of links on handling files in Java. When you have written some code and have an actual problem, we'll be happy to help you with it.
    (edit) Incidentally, this sounds suspiciously like the sort of problem they set for the certification programs. In which case, don't bother; they're not worth the virtual paper they're printed on.

  • ECC6 EHP2 (ABAP+Java)  system copy using file system copy

    Hello Experts,
    I have a question around system copy method for a dual stack ECC6 EHP2 system.
    We are planning to take full file system backup of this entire ECC6 EHP2 dual stack system and throw it on a completely new hardware with new host name but same SID.  We are also planning to do a host renaming in instance profiles and re-building the control files in target system after we finish the file system restore.
    Is this method supported in SAP ? Or we strictly have to use  SAPinst to do export and import method.  In any case our source and target platform is not going to chance as per our scenario.
    Any suggestions will be greatly appreciated.
    Thanks,
    Harshal

    > Thanks for the quick response. Is their any document that says it is not supported ?  Because of no proper document that says no to do it, client want's to try it out.
    For the ABAP part this is certainly feasible.
    The Java part has not only issues with the secure store but also with SID and hostname. The old values are stored in many places in the database and in, depending on the applications installed, many .properties files in the filesystem. So it would be not enough to somehow regenerate the secure store but also change hostname and SID in different places that are not really all documented.
    What you are basically looking for is
    Note 757692 - Changing the hostname for J2EE Engine 6.40/7.0 installation
    with the significant sentence
    This note should be applied only when the hostname of a machine
    where the j2ee engine was already installed has changed.
    It does not replace the SAP official system copy procedure and
    MUST NOT be used for copying of an instance to another host and/or with different SID.
    Markus

  • File system and LR2 file system view summary

    Hello,
    Is there a way when navigating a directory via the Folders panel to click on the folder and get summary information about the contents of the folder both from a file system perspective as well as a Lightroom perspective?
    file system perspective: number of physical files supported by LR2 in the folder
    LR2 perspective: the number of files that have virtual copies, how many total virtual copies total, how many photos are in stacks, how many stacks, etc.
    Thanks,
    Matt
    -Windows XP x64 SP2
    -AMD Athlon 64 X2 Dual Core 6400+
    -4.00 GB of RAM
    -Lightroom Version 2.0 64-bit 481478 Camera Raw 4.5
    -Two Silicon Graphics GDM-5011P Monitors
    -Huey Pro with version 1.5 of their calibration/profiling software
    -Nvidia Evga 8800 GT graphics card with 512 MB of Video RAM
    -Monitor One: The 'normal' Lightroom window in either the Library or Develop Module
    -Monitor Two: 'Loupe-Normal' in 1:1 view

                   No, you can't specify an entire filesystem as something to cluster. I
              suggest using NFS or some shared filesystem and then running a cluster
              off of that.
                                       - Mike
              Michael Lenart wrote:
              >
              > yes
              > "Mike Benham" <[email protected]> wrote in message
              > news:[email protected]..
              > >
              > >
              > >
              > > I'm not sure if I understand what you're asking. How can you cluster a
              > > filesystem? It seems like you want to mount some filesystem via NFS and
              > > then access that from each instance of a server? Are you asking if
              > > Weblogic can perform the duty of NFS?
              > >
              > > - Mike
              > >
              > >
              > > Michael Lenart wrote:
              > > >
              > > > Can the file system be clustered?? For example, in the cluster level
              > > > property file can I have a file system with the name of XDrive and then
              > use
              > > > that file system in my components??
              

  • Is OCFS(Oracle Cluster File System) a real file system?

    Hi all
    Is oracle cluster file system something kind of FAT23 or NTFS on Windows, ext3 on Linux ?
    We install operating systems on FS , but with OCFS we install Oracle database on it instead of operation system ?
    As usual
    Applications
    OS
    File System
    Physical Drive
    But the ocfs is something like:
    Oracle
    OCFS
    OS
    OS's file system
    Physical Drive
    Is that right ?

    Robert Geier wrote:
    OCFS is a clustered filesystem. You don't use it for OS partitions (e.g /opt) but only for filesystems that will be shared between servers in a RAC cluster to hold database files.
    Are you installing RAC ? If so, then ASM is a better option than OCFS. If not, then you really don't need OCFS.Thanks
    I'm studying RAC.
    I hear that I can not put all kind of files into ASM but with OCFS I can hold them.
    Is that improved with 11g R2 ?

  • Is OCS a real File system or Virtual file system?

    Hello gurus,
    I would like to ask pros some fundamental questions regarding OCS.
    1. Are files and folders in ocs are stored as real system files and directories in OS somewhere ?
    2. Are the files or folders all all maintained in database itself?
    We are trying to accomplish following task pertaining to document management: I dont know if we can achieve this through Oracle content services.
    We have bunch of documents that are attached to the Units ( Serialized) that we are selling.
    example
    1. SN1_A.doc ( sold from sales order 12345 and same documents referenced in Service request# A123)
    2.SN1_B.doc (sold from sales order 12345 and same documents referenced in Service request# A123)
    3. SN2_A.doc ( sold from sales order 12346 and referenced in SR# A124)
    4. SN2_B.doc ( sold from sales order 12346 and referenced in SR# A124)
    No we want two VIRTUAL directory views for Sales team and Service Team
    Virtual view for Service team:
    /Field Service/Service Requests/A123/ (will show SN1_A.doc and SN1_B.doc )
    /Field Service/Service Requests/A124/(will show SN2_A.doc and SN2_B.doc )
    Virtual view for Sales team:
    /Field Sales/Sales Orders/12345 / (will show SN1_A.doc and SN1_B.doc )
    /Field Sales/Sales Orders/12346 /(will show SN2_A.doc and SN2_B.doc )
    Is this possible in OCS? Is this possible in any Document Management product?
    Please help

    Hello,
    out of the box OCS content services won't do this for you -- at least not exactly.
    What you're looking for is a way to tag documents with metadata.
    For example, you would define a category called Sales and give it two attributes: sales order and service request.
    You create a folder which forces the user the populate these fields when uploading or checking in a document.
    A service technician could then use the content search facility (in the content browser) to look for documents with a service request of A123, while a salesman could search for documents tagged with the sales order 12345.
    This does not give you the virtual folder look that you seem to be after, so that would be the part you'd have to custom code. But you'd be using the search mechanism I described above.
    Regards,
    Ingo

  • Creating File System Repository for a remote system

    Hi Experts,
    My requirement is that I need to create a KM repository in EP from where I need to upload documents into the BW system. Is File System Repository the right type of repository which I need to create for this purpose?
    If yes, then in what format do I have to specify the value of the Root Directory property of the repository? I have a folder /data/docs created in the BW system within which I want to upload documents using this repository. But since this folder is located on the BW system which is a remote system for EP, I am not sure how I have to enter the path to this folder.
    Can anyone give me any hints on this?
    Warm Regards,
    Saurabh

    Hello Saurabh,
    I don't think an FS repository is what you are looking for in this scenario, you could instead use a BI Repository Manager, for more information see:
    http://help.sap.com/saphelp_nw70/helpdata/en/43/c1475079642ec5e10000000a11466f/frameset.htm
    Kind regards,
    Lorcan.

  • Not able to run adadmin adfter installing R12 Upgrade file system

    Sawwan,
    Now we are doing 11i apps to R12 upgrade single node, before we did database upgrade 9i to 10.2.0.4,
    I successfully installed R12 upgrade file system with out any errors, i have chagned the
    new Installation creates APPL_TOP, COMMON_TOP, INST_TOP and 10g Oracle Home
    i moved the new environment file into .bash_profile
    mv .bash_profile .bash_profile_11.5.10
    Iset the R12 environment , When ever i tried to run adadmin system manager password is not taking its giving error
    [applupg@peabody appl]$ adadmin
    Copyright (c) 2002 Oracle Corporation
    Redwood Shores, California, USA
    Oracle Applications AD Administration
    Version 12.0.0
    NOTE: You may not use this utility for custom development
    unless you have written permission from Oracle Corporation.
    Your default directory is '/u01/R12/apps/apps_st/appl'.
    Is this the correct APPL_TOP [Yes] ?
    AD Administration records your AD Administration session in a text file
    you specify. Enter your AD Administration log file name or press [Return]
    to accept the default file name shown in brackets.
    Filename [adadmin.log] :
    ************* Start of AD Administration session *************
    AD Administration version: 12.0.0
    AD Administration started at: Sat Apr 18 2009 06:12:52
    APPL_TOP is set to /u01/R12/apps/apps_st/appl
    Backing up restart files, if any......Done.
    Your previous AD Administration session did not run to completion.
    Do you wish to continue with your previous AD Administration session [Yes] ?
    You are about to use or modify Oracle Applications product tables
    in your ORACLE database 'upg'
    using ORACLE executables in '/u01/R12/apps/tech_st/10.1.2'.
    Is this the correct database [Yes] ?
    AD Administration needs the password for your 'SYSTEM' ORACLE schema
    in order to determine your installation configuration.
    Enter the password for your 'SYSTEM' ORACLE schema: manager
    ...Unable to connect.
    AD Administration error:
    The following ORACLE error:
    ORA-12541: TNS:no listener
    occurred while executing the SQL statement:
    CONNECT SYSTEM/*****
    AD Administration error:
    Unable to connect to 'SYSTEM'; password may be invalid.
    AD Administration needs the password for your 'SYSTEM' ORACLE schema
    in order to determine your installation configuration.
    Enter the password for your 'SYSTEM' ORACLE schema:
    Enter the password for your 'SYSTEM' ORACLE schema:
    Before running R12 adadmin is there nessary 11i apps servicess should up or down..
    Edited by: HumanDBA on May 5, 2009 12:26 PM

    Sawwan,
    As a oracle user i am able to see the tns_admin home dir
    [oraupg@peabody upg_peabody]$ echo $TNS_ADMIN
    /stage/10gsoftware/network/admin/upg_peabody
    [oraupg@peabody upg_peabody]$
    After installing R12 uprade file system i am able do the tnsping
    [applupg@peabody appl]$ tnsping upg
    TNS Ping Utility for Linux: Version 10.1.0.5.0 - Production on 18-APR-2009 06:26:49
    Copyright (c) 1997, 2003, Oracle. All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=peabody)(PORT=1526)) (CONNECT_DATA=(SID=upg)))
    TNS-12541: TNS:no listener
    [applupg@peabody appl]$
    [applupg@peabody appl]$ sqlplus apps/xxxx@upg
    SQL*Plus: Release 10.1.0.5.0 - Production on Sat Apr 18 06:29:45 2009
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    ERROR:
    ORA-12541: TNS:no listener
    Enter user-name:
    ========================================
    Sawwan
    after installing i am trying to apply R12.AD.B patch, do we need to apply this patch in 11i fiile system or New R12 file system, for 11i file system i am not getting any issue, but when ever i set the R12 new file system enviroment file then only i am not able to connect the database,i have changed new port numbers in R12 file system, is that causing any issues..?
    Edited by: HumanDBA on May 5, 2009 12:37 PM

  • Best Practice for Distributed TREX NFS vs cluster file systems

    Hi,
    We are planning to implement a distributed TREX, using RedHat on X64, but we are wondering which could be the best practice or approach to configure the "file server" used on the TREX distributed environment. The guides mention file server, that seems to be another server connected to a SAN exporting or sharing the file systems required to be mounted in all the TREX systems (Master, Backup and Slaves), but we know that the BI accelerator uses OCFS2 (cluster file systems) to access the storage, in the case of RedHat we have GFS or even OCFS.
    Basically we would like to know which is the best practice and how other companies are doing it, for a TREX distributed environment using either network file systems or cluster file systems.
    Thanks in advance,
    Zareh

    I would like to add one more thing, in my previous comment I assumed that it is possible to use cluster file system on TREX because BI accelerator, but maybe that is not supported, it does not seem to be clear on the TREX guides.
    That should be the initial question:
    Aare cluster file system solutions supported on plain TREX implementation?
    Thanks again,
    Zareh

  • Lucreate - „Cannot make file systems for boot environment“

    Hello!
    I'm trying to use LiveUpgrade to upgrade one "my" Sparc servers from Solaris 10 U5 to Solaris 10 U6. To do that, I first installed the patches listed on [Infodoc 72099|http://sunsolve.sun.com/search/document.do?assetkey=1-9-72099-1] and then installed SUNWlucfg, SUNWlur and SUNWluufrom the S10U6 sparc DVD iso. I then did:
    --($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207  -m /:/dev/md/dsk/d200:ufs
    Discovering physical storage devices
    Discovering logical storage devices
    Cross referencing storage devices with boot environment configurations
    Determining types of file systems supported
    Validating file system requests
    Preparing logical storage devices
    Preparing physical storage devices
    Configuring physical storage devices
    Configuring logical storage devices
    Analyzing system configuration.
    Comparing source boot environment <d100> file systems with the file
    system(s) you specified for the new boot environment. Determining which
    file systems should be in the new boot environment.
    Updating boot environment description database on all BEs.
    Searching /dev for possible boot environment filesystem devices
    Updating system configuration files.
    The device </dev/dsk/c1t1d0s0> is not a root device for any boot environment; cannot get BE ID.
    Creating configuration for boot environment <S10U6_20081207>.
    Source boot environment is <d100>.
    Creating boot environment <S10U6_20081207>.
    Creating file systems on boot environment <S10U6_20081207>.
    Creating <ufs> file system for </> in zone <global> on </dev/md/dsk/d200>.
    Mounting file systems for boot environment <S10U6_20081207>.
    Calculating required sizes of file systems              for boot environment <S10U6_20081207>.
    ERROR: Cannot make file systems for boot environment <S10U6_20081207>.So the problem is:
    ERROR: Cannot make file systems for boot environment <S10U6_20081207>.
    Well - why's that?
    I can do a "newfs /dev/md/dsk/d200" just fine.
    When I try to remove the incomplete S10U6_20081207 BE, I get yet another error :(
    /bin/nawk: can't open file /etc/lu/ICF.2
    Quellcodezeilennummer 1
    Boot environment <S10U6_20081207> deleted.I get this error consistently (I ran the lucreate many times now).
    lucreate used to work fine, "once upon a time", when I brought the system from S10U4 to S10U5.
    Would anyone maybe have an idea about what's broken there?
    --($ ~)-- LC_ALL=C metastat
    d200: Mirror
        Submirror 0: d20
          State: Okay        
        Pass: 1
        Read option: roundrobin (default)
        Write option: parallel (default)
        Size: 31458321 blocks (15 GB)
    d20: Submirror of d200
        State: Okay        
        Size: 31458321 blocks (15 GB)
        Stripe 0:
            Device     Start Block  Dbase        State Reloc Hot Spare
            c1t1d0s0          0     No            Okay   Yes
    d100: Mirror
        Submirror 0: d10
          State: Okay        
        Pass: 1
        Read option: roundrobin (default)
        Write option: parallel (default)
        Size: 31458321 blocks (15 GB)
    d10: Submirror of d100
        State: Okay        
        Size: 31458321 blocks (15 GB)
        Stripe 0:
            Device     Start Block  Dbase        State Reloc Hot Spare
            c1t0d0s0          0     No            Okay   Yes
    d201: Mirror
        Submirror 0: d21
          State: Okay        
        Submirror 1: d11
          State: Okay        
        Pass: 1
        Read option: roundrobin (default)
        Write option: parallel (default)
        Size: 2097414 blocks (1.0 GB)
    d21: Submirror of d201
        State: Okay        
        Size: 2097414 blocks (1.0 GB)
        Stripe 0:
            Device     Start Block  Dbase        State Reloc Hot Spare
            c1t1d0s1          0     No            Okay   Yes
    d11: Submirror of d201
        State: Okay        
        Size: 2097414 blocks (1.0 GB)
        Stripe 0:
            Device     Start Block  Dbase        State Reloc Hot Spare
            c1t0d0s1          0     No            Okay   Yes
    hsp001: is empty
    Device Relocation Information:
    Device   Reloc  Device ID
    c1t1d0   Yes    id1,sd@THITACHI_DK32EJ-36NC_____434N5641
    c1t0d0   Yes    id1,sd@SSEAGATE_ST336607LSUN36G_3JA659W600007412LQFN
    --($ ~)-- /bin/df -k | grep md
    /dev/md/dsk/d100     15490539 10772770 4562864    71%    /Thanks,
    Michael

    Hello.
    (sys01)root# devfsadm -Cv
    (sys01)root# To be on the safe side, I even rebooted after having run devfsadm.
    --($ ~)-- sudo env LC_ALL=C LANG=C lustatus
    Boot Environment           Is       Active Active    Can    Copy     
    Name                       Complete Now    On Reboot Delete Status   
    d100                       yes      yes    yes       no     -        
    --($ ~)-- sudo env LC_ALL=C LANG=C lufslist d100
                   boot environment name: d100
                   This boot environment is currently active.
                   This boot environment will be active on next system boot.
    Filesystem              fstype    device size Mounted on          Mount Options
    /dev/md/dsk/d100        ufs       16106660352 /                   logging
    /dev/md/dsk/d201        swap       1073875968 -                   -In the rebooted system, I re-did the original lucreate:
    <code>--($ ~)-- time sudo env LC_ALL=C LANG=C PATH=/usr/bin:/bin:/sbin:/usr/sbin:$PATH lucreate -n S10U6_20081207 -m /:/dev/md/dsk/d200:ufs</code>
    Copying.
    *{color:#ff0000}Excellent! It now works!{color}*
    Thanks a lot,
    Michael

  • Export data from SAP Document Management System to File System(FileStore)

    Hi,
    We need to extract/ export data (documents and metadata) from SAP Document Management System to windows File System (File Store), can anyone suggest us tool or methodology to do the same.
    Thanks,
    Nilesh

    I'm also looking for a solution for this problem. We are capturing comments in BW-BPS layouts. They get stored in BW's document management system and we would like to export them out of the system for external reporting into an ACCESS database.

  • File System Repository Index

    Hi all,
    I´m trying to create an index wich data source is a file system repository (the file system is remote). Surfing trough help.sap i found this:
    http://help.sap.com/saphelp_nw04/helpdata/en/e3/92322ab24e11d5993800508b6b8b11/content.htm
    And then in SDN i found this post: File System Repository can't be assigned to Index and I already add the "properties" service to my repository, but it didn´t work, Any other idea?
    Regards,
    Orlando Covault

    Hi,
    For creating index u must configure TREX
    <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/a9/4a6642161d0f53e10000000a155106/frameset.htm">TREX Configuration (SAP Library - Search and Classification (TREX))</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/26/eeb73975a4e94b85c70de1c020b2f1/frameset.htm">TREX Configuration (SAP Library - Search and Classification (TREX))</a>
    <a href="http://help.sap.com/saphelp_nw04/helpdata/en/73/66c090acf611d5993700508b6b8b11/content.htm">Creating an Index</a>, <a href="http://help.sap.com/saphelp_nw04s/helpdata/en/69/d96b86a84611d5993600508b6b8b11/content.htm">Repository Services</a>, <a href="https://www.sdn.sap.com/irj/sdn/km?rid=/webcontent/uuid/709664d2-2276-2910-429d-b6a1f5977c8d#IDAQZINE">Knowledge Management, TREX and Collaboration How-to Guides for SAP</a>
    Regards,
    Beevin.

Maybe you are looking for

  • Reg : Knapsack problem - [Off Topic] -

    Hi All, Few days back, there was a post which was a practical implementation of the 'Knapsack Problem'. And, I remember somebody actually posted a query which solved this. Can anybody please give me the link for it? Or, if have the query? I searched

  • How to ttransfer itunes music from ipad to mac os x 10.4, itunes 9

    how to transfer itunes music from ipad to mac os x 10.4, itunes 9

  • Reverse ASKBN Documents only for one Area

    Hello dear friends. Due to a problem at Exit ZXAPCU05, asset purchases were improperly loaded into an area of evaluation "X" for cost control assigned as well. When I run the t-code ASKBN, launch were registered in this area and this is wrong. The wr

  • Can not boot from Hard Drive and or CD

    Hi I have a SUN Blade 1000. I loaded Solaris 10 a few days ago and had it running pretty good until I ran an update program. Now I cannot boot the dam thing. IT just hangs at a * prompt somwhere in the boot process. I would like to re load Saolaris 1

  • Locale Input changes on Mac OS X Lion when changing the view state

    On Mac OS X Lion, the following code results of changing the locale input when changing the view state. If you set the input locale to Pynin, then run the application, then click on "go to the test 2", the input locale changes back to english. This i