System bug of ios 7.x

Hi!!! I`m website developer. Look likes i found system bug. It doesnt meter what kind of brouser you are use. When the alignment of the document to the right, the location calculation fails when scaling fixed elements of the page. This is preset on all devices from ios 6-7. So anyone else encountered this problem that occurs, how to fix this bug system.This occurs when the spelling from right to left since the position of all the elements tied to the right edge.
Anton
Message was edited by: simbaraka

Send feedback/suggestions to Apple.
http://www.apple.com/feedback/ipad.html
 Cheers, Tom

Similar Messages

  • I found a bug in iOS 4.3.3 - Long voice memos

    Hello,
    i found a bug in iOS 4.3.3 for my iPhone 3GS
    Long voice memos can not be played
    In these cases, the iPhone saves the file not in the format M4A or can not open this file.
    This file is stored in the folder /var/mobile/Media/Recordings
    In This cases there can be find a file in the format MOV.
    During recording, the voice memo has the format MOV.
    When the voice memo stopped the file must be stored in the format M4A.
    For large files, there are currently problems.
    I use the program  iPhone Explorer and save the MOV-file on my computer.
    Now i can open it with QuickTime.
    Best regards from Germany!
    Ruediger

    Apple Feedback

  • Bug Report iOS 7 iTunes. Since it is repeatable on 3 iPhones and 4 iPads here, I'm sure others are experiencing the same thing. Apple, might want to take a peek at this. When a tv show or movie is deleted from Videos, the Videos app shuts down.

    Bug Report iOS 7 iTunes. Since it is repeatable on 3 iPhones and 4 iPads here, I'm sure others are experiencing the same thing. Apple, might want to take a peek at this. When a tv show or movie is deleted from Videos, the Videos app shuts down instead of returning to video playlist.
    Restarting videos works and looks like video is getting deleted.
    Just a bug report

    You might want to report that to Apple instead of to the other users in this forum.
    http://www.apple.com/feedback/iphone.html

  • I've found two bugs in iOS 7. 1) declined calls does not appear as missed calls on the lock screen/notification centre. 2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device

    I've found two bugs in iOS 7:
    1) declined calls does not appear as missed calls on the lock screen/notification centre - iOS 7.0.2.
    2) when bluetooth is enabled from control center, it does not connect to an already paired bluetooth device automatically - iOS 7.0.

    We are all users here, just like you, but you can tell Apple about it by using this link:
    Apple - iPhone - Feedback

  • What is apple doing to fix the bugs from IOS 7.1.2 update? this update has ruined my phone

    What is Apple doing to fix the bugs from IOS 7.1.2 update??? This update has ruined my phone! Why would you put out a update you know is going to ruin someones phone? Whats being done? I have tried everything to fix my phone which was just fine before Apples IOS 7.1.2 update!!!

    I have also experienced issues with my iphone5 since updating to ios 7.1.2, prior to this update my phone was working perfectly fine and I know I didnt cause any damage to the phone because I baby my iphone as if it was my child. Ever since I updated to 7.1.2 my phone shutts itself down while I am using it, it can be while using whatsapp, browsing the internet or using apps, more than anything it fails while using the internet. The screen will either start to flicker or vertical lines will pop up and then the phone will fade to black, after this happens the phone will get really hot and to turn it back on I have to wait 5-10 minutes and hold down the power and home keys at the same time for about 15 seconds for it to turn back on, I have to wait 5-10 minutes because if I dont when I boot it back up it immediately shutts down again. This is a constant all day thing and for now i get by just making phone calls and sending regular text but I try to keep the action down to a minimum to prevent missing a phone call. I tried clearing the phone and rebooting it to original setting but this didnt fix it. After reading and speaking with several techs they tell me that ios 7.1.2 rolled out some performance adjustments one particular that affects the amp levels that the battery works at and supposedly the iphone 5 cant handle it, they explained that the phone for certain activities is asking for more or less power and the phone panics into safe mode and shutts itself down. My battery life is fine so I havent changed the battery like someone had suggested. In the diagnostic data it gives a panic.ips error. Id really like to know if there is any possible way to roll back to 7.1.1 through jailbreak or any other way, I was perfectly happy with this phone and didnt plan on buying another one for atleast 1-2 more years. If anyone can help me out this would be greatly appreciated, if not I hope apple is working to fix this.

  • Dear Apple, unfortunately, I think I have found a bug in ios 7. During an incoming call is no call rejection or selection of the ability to send a text message. I hope it is a bug and there is a solution. Thank you very much.

    Dear Apple, unfortunately, I think I have found a bug in ios 7. During an incoming call is no call rejection or selection of the ability to send a text message. I hope it is a bug and there is a solution. Thank you very much.

    Please report via Apple Feedback. These are user forums. You aren't speaking to Apple here.

  • Why does auto brightness has a bug in iOS 7.1.1 . The brightness switches automatically to higher in bright places but not returns to lower brightness in dark places but when you lock and unlock it becomes normal

    Why does auto brightness has a bug in iOS 7.1.1 . The brightness switches automatically to higher in bright places but not returns to lower brightness in dark places but when you lock and unlock it becomes normal

    Hello,
    Same problem for me. Really a pain in the *** this bug ! Does Apple fixed it. I'm really suprised noone reports this problem  and apple does not adress this.
    Because of that, I cannot give it anymore to children because it hurts the view. Really a shame on the part of apple !
    Regards

  • I Have found a bug in iOS 7.1 on iPhone 4S ? What should i do ?(i'm french)

    I Have found a bug in iOS 7.1 on iPhone 4S, what shoud I Do ? (i'm french)

    Use the contact us link at the bottom of the page and tell Apple.

  • Bug in iOS 7 privacy

    Bug in iOS 7 > privacy>Advertising
    Click the "Learn More" link under Reset Advertising Identifier
    Takes you to a page and I get the following:
    Access Denied
    You don't have permission to access "http://appldnld.apple.com/iOS7/091-5242.20130830.Pprfg/AdSupportWeb/en.lproj/inf o.html" on this server.
    Reference #18.3d24553f.1379540164.f2e12db

    Never used the feedback before, there is an option to report a bug there.
    Thanks

  • How do I update operating system? To iOS 5 or 6

    How do I update operating system? To iOS 5 or 6

    Go to settings>general>software update>update! There you go.

  • I found a bug in IOS

    Where can I report it?
    I assume I'm not the first one, so where can I check any further details? Maybe it's not even a bug
    It's delated with BVI - Bridge-Group Virtual Interface. It won't come UP, unless you type
    "R1(config)#interface bvi 1 ?"
    That question mark at the end is the key that will enable BVI interface. You don't need to press enter. It took me a few days to figure it out...
    Regards,
    Ziga

    I noticed another bug in IOS. This time on static DHCP settings. You need to have default-router entry otherwise it doesn't work.
    Here's sample config:
    ip dhcp pool STATIC
    host 10.10.10.10 255.255.255.240
    client-identifier 0122.5b27.1f62.aa
    default-router 10.10.10.1
    Thisway is working, but without last command - it's not working.
    "show ip dhcp bindings" is properly showing that static entry exists, but router doesn't assign desired IP. I'm using universal IOS v15 on cisco 800 series.
    Regards,
    Ziga

  • My iPod Touch 5 brightness suddenly turned dim but when I go to my brightness and wallpaper page in settings it is at the middle (Normal Brightness). Is this a bug in ios 6 or something?

    My iPod Touch 5 brightness suddenly turned dim but when I go to my brightness and wallpaper page in settings it is at the middle (Normal Brightness). Is this a bug in ios 6 or something?

    If the reset does not work I would try the following before going to Apple
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • "Why Apple do not fix light sensor bug in ios 6 ipod touch 4g plz give me update for this"

    Light Sensor increase but not Decreas light

    As you have been directed in the other posts you've made on the issue, this is most likely a hardware problem with your particular iPod, and you won't get different answers by posting more threads on the topic. If this was a bug in iOS 6, I'm sure we'd have seen many more posts on the problem, so this is more likely to be a problem with your iPod, not with iOS 6 itself.
    Regards.

  • A system bug regarding to "base row number"

    Dear All,
    I may have found a system bug, which is causing problems.
    Would anyone have a way around? or should I raise the issue to SAP through our reseller?
    Basically, the "base row numbers", in some cases, can incorrectly relate to the row numbers in base documents.
    One example:
    We have 3 lines on one Sales order
    row number       |  Item code       
    1                       |   C001    
    2                      |     B002
    3                       |     A003
    If I need to duplicate row 2 (B002) on the order, or insert a new line in between the 3 items, to change the order to
    (Similiarly, you could double click on the column title i.e. Item code to sort the grid table)
    row number       |  Item code       
    1                       |   C001    
    2                      |     B002
    3                      |     B002
    4                       |     A003
    Then I copy the order to a Delivery, you will see the "base row number" in the database like so, which is wrong
    row number     | base row |  Item code       
    1                      |         1|   C001    
    2                      |          4|     B002
    3                      |          2|     B002
    4                      |          3|     A003
    This issue is causeing many problems (as existing in all documents) for reporting in terms of linking documents.
    Because there could be same items put on order more than once, we cannot use "item code" to link/track line details etc.
    Any idea? or I would be glad to see I was wrong.
    Many thanks
    Yang
    Edited by: Y on Nov 17, 2009 11:10 AM

    It is not a bug. In the documents two data describe the position of the row:
    1. The LineNum is the number assigned to the line when it is generated.  It does not change when you insert a line before it. The Base Row Number refer to this number, because it must point to the same line even when a new line is inserted before it.
    2. The VisOrder is the actual sequence number of the line in the document. It may change when you insert/delete lines in the document.
    What you may assume problem is that you can not make visible the LineNum by Form Settings. But you can define a UDF and an FMS setting it to the LineNum:
    Select $[RDR1.LineNum]

  • Bugs in ios 5.1(9b179) version.

    There are too many bugs in ios 5.1(9b179) version. When moving towards the search iphone the keypad automatically moves up and then while going back to home screen it stays so for which one has to restart the phone.Another bug is app refuses to install on on wiifii networks.Please find the solution of this problem. 

    find the IPSW file and delete it. then, backup the iPhone and restore it. this will force itunes to download a new IPSW file (the installation file or iOS). then, before you restore form backup, test the iPhone while it's empty.
    if you must resotre from backup, turn off automatic syncing in iTunes first... but, if the bug is in your settings, then restoring the iPhone from backup might bring the bug back onto the iPhone.

Maybe you are looking for

  • Error while trying to delete leave request

    Dear All, When trying to delete a leave request via ESS Portal, system is displaying the following error message: "No Customizing for status type ARQ, status Posted and transition event Delete." In the workflow log, Document Status is POSTED and Work

  • Outlook 2010 crashing when closing program

    I'm using Windows 8 64bit, but using MS office as 32 bit.  Since installing LeanPrint 32bit, every time I close out Outlook it crashes and tells me to uninstall this program; then Outlook restarts and then I can close down properly. Please advise wha

  • Column Issue in custom DBI report

    Hello all, I created one custom DBI report. In that Start Time filed should shows Date and time (ie. 4/1/2009 5:14:14 PM). But in my custom report it is showing only the date (time is hiding). I tried to update the field, that display type as Date. T

  • Screen Sharing Works, File sharing does not work

    Up until yesterday everything seemed to be working fine, I could connect to my mini over my network and get files from it. Now I am not sure what I did, but everytime I click on the mac mini in the finder it says connection failed. I can still do scr

  • Standby Database in RAC

    Hi, We have two nodes RAC environment on the AIX 6.1 Our requirement is to have a database for the reporting purpose in one of the node and replicate the data from source to target.  Is it possible to create physical standby database in one of the no