System calls - Info about the ABIs : common x32 64

Hi
I am exploring system calls in Linux and want to know more about the different ABIs. I can see there are 3 types in the systemcall_64.tbl: common, 64 and x32.
If you can briefly explain each one or point me to some good resources, it'll be greatly appreciated.
Thank you in advance.

I have a machine with essentially the same specs, except I have 16GB of ram. I'd say get the RAM. 16GB makes my machine run like a dream. i'm in engineering, so I run AutoCAD and other similar applications. If you do use VM's, then you will want the extra memory as well. The machine can run linux, but with the loss of the Optimus, as it is not supported well. Do a clean install, but make the Recovery dvds first. also go to the root of the hard drive and back up the SWTOOLS and swshare folders. those contain all of the preloaded software. I always do a clean install when I get a new machine. Everything else looks good.
W530(2436-CTO): i7-3720QM, nVidia Quadro K2000M,16GB RAM, 500 GB hard drive, 128GB mSATA SSD, Ubuntu 14.04 Gnome, Centrino Ultimate-N 6300.
Yoga 3 Pro: Intel Core-M 5Y70, Intel HD 5300, 8GB RAM, 128GB eMMC, Windows 8.1, Broadcom Wireless 802.11ac.

Similar Messages

Info about the RFC

Hi,
I have to work on RFC FM. Can any body give me the info about the RFC? especially for Function module?
Will give Reward points
regards,Ram

Hi
RFC (Remote Function Call) is similar to the general SAP fun module: except that in the attributes you click the radio button: RFC enabled;
and you will be passing an Import parameter DESTINATION to it.
Other code and usage will be similar to any fun module;
Have a look at any fun module in SE37 to understand better about the different components of Fun modules;
Refer this link:
http://help.sap.com/saphelp_nw04/helpdata/en/22/042518488911d189490000e829fbbd/frameset.htm
Function Modules doc
Function Modules;
Check this matter.
Function Modules are Global ABAP programs created by SAP for reusable purpose.they have IMPORT,EXPORT and TABLE parameters, and EXCEPTIONS to through when error occurs.
You can create them from TCode SE37.
Go through the following doc:
Function modules are cross-program, reusable procedures that are organized into function groups, and whose functions are implemented between the statements FUNCTION and ENDFUNCTION. Function modules and their interfaces are created in the Function Builder.
Function Module Interfaces
The parameter interface of a function module is defined in the Function Builder. It includes the definition of interface parameters and the specification of exceptions that can be triggered by a function module. The Function Builder automatically generates comment lines below the FUNCTION statement in the source code of the function module, which represent the interface of the function module with the following syntax:
Syntax
... [IMPORTING parameters]
[EXPORTING parameters]
[CHANGING parameters]
[TABLES table_parameters]
[{RAISING|EXCEPTIONS} exc1 exc2 ...]
The syntax and semantics of IMPORTING, EXPORTING, CHANGING, RAISING, and EXCEPTIONS mainly correspond to the definition of method interfaces with [CLASS-]METHODS. The additional option of defining table parameters using TABLES is obsolete.
Interface parameters
The interface parameters are defined on the relevant tab pages in the Function Builder.
IMPORTING parameters are input parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input parameter. The content of the actual parameter is passed to the input parameter when the call is made. The content of an input parameter for which 'pass by reference' is defined cannot be changed in the function module.
EXPORTING parameters are output parameters. When the function module is called, a suitable actual parameter can be specified for every output parameter. The content of an output parameter that is defined for 'pass by value' is transferred to the actual parameter if the function module is completed without errors. An output parameter that is defined for pass by reference is not initialized when the function module is called.
CHANGING parameters are input and output parameters. When the function module is called, a suitable actual parameter must be specified for every non-optional input or output parameter. When the function module is called, the content of the actual parameter is passed to the input/output parameter, and when the function module is completed, the content of the input/output parameter is passed to the actual parameter.
TABLES parameters are table parameters. Table parameters are obsolete CHANGING parameters that are typed as standard tables with a header line. If an internal table without a header line or a table body is passed as an actual parameter to a formal parameter of this type, an empty local header line is generated in the function module. If an internal table with a header line is used as an actual parameter, both the table body and the header line are passed to the function module. Pass by value is not possible in formal parameters defined using TABLES. Formal parameters defined with TABLES can be replaced by formal parameters defined with CHANGING. A local work area can be created for the internal table in the function module by using the addition LIKE LINE OF itab of the DATA statement.
Exceptions
The exception of a function module are defined on the Exceptions tab page in the Function Builder. Here you can select exception classes to define whether class-based exceptions are declared or non-class-based exception are defined. Class-based exceptions are represented in the above syntax by RAISING, and non-class-based exceptions are represented by EXCEPTIONS.
The addition RAISING is used to declare class-based exceptions that can be propagated from the function module to the caller. Exceptions in the categories CX_STATIC_CHECK and CX_DYNAMIC_CHECK must be explicitly declared, otherwise a propagation can lead to an interface violation. A violation of the interface leads to the treatable exception CX_SY_NO_HANDLER. Exceptions of the category CX_NO_CHECK are implicitly always declared. The declaration of exceptions of the category CX_STATIC_CHECK is statically checked in the syntax check. For exceptions of the category CX_DYNAMIC_CHECK, the check is not performed until runtime. In a function module in which class-based exceptions are declared with the RAISING addition, the statement CATCH SYSTEM-EXCEPTIONS cannot be used. Instead, the relevant treatable exceptions should be handled in a TRY control structure.
The addition EXCEPTIONS is used to define a list of non-class-based exceptions that can be triggered in the function module using the statements RAISE or MESSAGE RAISING. Exceptions defined in this way - as with formal parameters - are bound to the function module and cannot be propagated. If an exception of this type is triggered in a function module, and no return value has been assigned to it with the homonymous addition EXCEPTIONS of the CALL FUNCTION statement when the call was made, this leads to a runtime error.
Note
For new developments after release 6.10, SAP recommends that you work with class-based exceptions that are independent of the function module.
RFC is a technology which is used to access a functions (Modules) from
the remote systems.
If a function module is set as remote enabled which can be access from
the remote system via RFC.Eg: U can access the Remote enabled function modules in ur VB,Webdynpro,Java,Visual composer program.
A function module can be set as remote enabled by SE37->Go to ur FM->click the option Button "remote enabled".
But Normal function modules can not accessd from the remote system.
Good Example for RFC enabled function module is : BAPI(Business Application Programming Interface)
Note: All BAPIs are Remote enabled but not all remote enabled function modules are BAPI.
CALLING A FUNCTION MODULE:
1)In U ABAP Editor --> Click "Patter" ---> Selection Option Button "Call Function"
--> Write the Corresponding FM name --> Hit Enter
2)The appropriate import ,export Parameters will be displayed in ur editor
3)Pass the Values Here.
Also check these links.
http://www.geocities.com/victorav15/sapr3/abapfun.html
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
Check this link:
http://help.sap.com/saphelp_erp2004/helpdata/en/9f/db988735c111d1829f0000e829fbfe/content.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/ef/d94b78ebf811d295b100a0c94260a5/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
See the following links:
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_erp2005vp/helpdata/en/9f/db970e35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/26/64f623fa8911d386e70000e82011b8/content.htm
Reward points for useful Answers
Regards
Anji

How to get info about the mobile, like screensize...

hi,
i need some info about the device my midlet is running on.
how is it possible to get info about the screensize, screentype(color/black) and perhaps devicetype or modelname?
i already read it somewhere but i didn't find the source again.
tia
mmkl

thx,
the example below shows some basic information.
Display myDisplay = Display.getDisplay(this);
Displayable dis = myDisplay.getCurrent();
int high = dis.getHeight();
int width = dis.getWidth();
boolean isCol = myDisplay.isColor();
int nubCol = myDisplay.numColors();more detailed information about model, aren't available through the standard api, on blackberry's there some restricted apis that provide these device-type and other detailed information...
for more basic information, just look at the class-methods from display and displayable...
mmkl

I would like to get certified for the SAP Crystal Reports. So, I would like to get some info about the currently available Certification Exams for Crystal Reports (2011/2013). Also, would greatly appreciate if you have any suggestions for thi

Hi,
I would like to get certified for the SAP Crystal Reports. So, I would like to get some info about the currently available Certification Exams for Crystal Reports (2011/2013). Also, would greatly appreciate if you have any suggestions for this Certification Exam preparation materials from another 3rd party or from SAP directly . I would like to prepare or get trained well before taking the exam as I see it costs around $500.
Thanks in advance for your help in this regard!
Sincerely,
J

Please search here.. Training and Certification Shop for your desired certification or training. Don't forget to set your location.
Please use some summarized title for your query.

HT4061 how to get full info about the iphone by putting the imei number in pc

how to get full info about the iphone by putting the imei number in pc

https://discussions.apple.com/message/23921736#23921736

Oracle designer 6i. Info about the current schema. Can't get tablespace inf

Oracle designer 6i. I am running sql against the views to get info about the current schema.
I can't get the tablespace names for the tables used in the latest version of a schema.
eg the below sql return far too many rows.
select distinct (lower(ti.GLOBAL_SYNONYM_NAME)||'*'||ts.name )
from
ci_application_systems app,
ci_table_implementations ti,
ci_tablespaces ts,
ci_storage_definitions sd
,sdd_folder_members mem
,ci_table_definitions td
where
     app.OWNING_USER = '$OWNER' and
     app.NAME = '$APP_NAME''' and
app.ivid = (select MAX(ivid) from ci_application_systems app2 where app2.name = '$APP_NAME'') and
mem.PARENT_IVID = app.IVID and
mem.MEMBER_OBJECT = td.ID
and ti.GLOBAL_SYNONYM_NAME IS NOT NULL
     and ti.STORAGE_DEFINITION_REFERENCE = ts.STORAGE_DEFINITION_REFERENCE
and ts.STORAGE_DEFINITION_REFERENCE = sd.ID

Hi Neil,
Thanks for your suggestion. I thought I tried all combinations of database, catalog and schema names and all different orders to connect, associate the connection and generate entities, but it seems I did not try this one. I did exactly what you suggest, except for the fact that I connected to the database before associating the connection to the project.
It partially works now. I can generate Entities. Once I have generated an entity, all generated private member variables become red underlined, because table "null" for columns "xyz" could not be resolved. And the drop down box for columns in the JPA Details pane still doesn't get populated. The latter can be fixed by selecting the proper schema for the entity, which results in a @Table(schema="xyz") annotation. However, I expected this to be done automatically when the Entity was generated.
The error about not being able to resolve the columns still exists. I tried to add a @Column(name="ASDF") annotation (because the columns names are all capital, while the member variables are lowercase), but that doesn't resolve the problem.
I hope this gives you a clue to solve the problem!
Bart

Info about the callling system in RFC

Hello ,
Is there a way in which I can get the system info of the calling system in an RFC...
This is scenario...
EBP               --> R3 in this I using a
Call RFC destR3        Function Module
                       here I want to know the calling
                       system
                       details so that I can make a call
                       back to EBP
Function Module <--    call function destEBP
Any help will be appreciated.
I have one option of storing the RFC destination of the EBP system in a bespoke table.. Is there a better solution.
Rgds,
Samir.

Hi,
If you only have to call EBP back, you could use the addition <b>CALL FUNCTION ... DESTINATION 'BACK'</b>. SAP will take care of the details itself. If you need the caller for further processing, the caller parhaps will have to be passed as a parameter.
Regards

Get info about the current call

I need a solution (eg ANE) for information about the current call - event of success, of duration, of ending.
Is that possible?

thx,
the example below shows some basic information.
Display myDisplay = Display.getDisplay(this);
Displayable dis = myDisplay.getCurrent();
int high = dis.getHeight();
int width = dis.getWidth();
boolean isCol = myDisplay.isColor();
int nubCol = myDisplay.numColors();more detailed information about model, aren't available through the standard api, on blackberry's there some restricted apis that provide these device-type and other detailed information...
for more basic information, just look at the class-methods from display and displayable...
mmkl

How can i get more info about the sent data in RTP?

Hello.
I'm working with the examples AVTransmitt2 and AV Receive2 and i want to get more information about the data that it is being sent to de receiver side. In AVTrasmitt2 i only see a calling to processor.start();. How could i know each packet that AvTransmit2 sends to the other side. I want info like the size of the data, the quality, format, etc..

Hi!
As I mentioned above. RTPSocketAdapter has two inner classes, SockOutputStream and SockInputStream.
SockOutputStream have a write method which is called when RTP data is sent over the NET. SockInputStream have a read method which is called when RTP data is received.
If you for instance want to know exactly what is sent you can parse the byte array that comes into write.
Like this:
* An inner class to implement an OutputDataStream based on UDP sockets.
class SockOutputStream implements OutputDataStream {
     DatagramSocket sock;
     InetAddress addr;
     int port;
     boolean isRTCP;
     public SockOutputStream(DatagramSocket sock, InetAddress addr, int port, boolean isRTCP) {
          this.sock = sock;
          this.addr = addr;
          this.port = port;
     public int write(byte data[], int offset, int len) {
          if(isRTCP){
               parseAndPrintRTCPData(data);
          }else{
               parseAndPrintRTPData(data);
          try {
               sock.send(new DatagramPacket(data, offset, len, addr, port));
          } catch (Exception e) {
               return -1;
          if(debug){
               System.out.println(debugName+": written "+len+" bytes to address:port: "+addr+":"+port);
          return len;
private void parseAndPrintRTPData(byte[] data) {
     // part of header, there still left SSRC and CSRC:s
     byte[] rtpHeader = new byte[8];
     System.arraycopy(data, 0, rtpHeader, 0, rtpHeader.length);
     ByteBuffer buffer = ByteBuffer.wrap(rtpHeader);
     int word = buffer.getInt();
     // version
     int v = word >>> 30;
     System.out.println("version: "+v);
     // padding
     int p = (word & 0x20000000) >>> 29;
     System.out.println("padding: "+p);
     // extension
     int x = (word & 0x10000000) >>> 28;
     System.out.println("extension: "+x);
     // CSRC count
     int cc = (word & 0x0F000000) >>> 24;
     System.out.println("CSRC: "+cc);
     // marker
     int m = (word & 0x00800000) >>> 23;
     System.out.println("marker: "+m);
     // payload type
     int pt = (word & 0x00700000) >>> 16;
     System.out.println("payload type: "+pt);
     // sequence number
     int seqNbr = (word & 0x0000FFFF);
     System.out.println("sequence number: "+seqNbr);
     // timestamp
     int timestamp = buffer.getInt();
     System.out.println("timestamp: "+timestamp);
private void parseAndPrintRTCPData(byte[] data) {
     // this only works when the RTCP packet is a Sender report (SR).
     // All RTCP packets are compound packets with a SR or Receiver report (RR) packet first.
     // part of header, there is still the report blocks (see RFC 3550).
     byte[] rtcpHeader = new byte[28];
     System.arraycopy(data, 0, rtcpHeader, 0, rtcpHeader.length);
     ByteBuffer buffer = ByteBuffer.wrap(rtcpHeader);
     int word = buffer.getInt();
     // version
     int v = word >>> 30;
     System.out.println("version: "+v);
     // padding
     int p = (word & 0x20000000) >>> 29;
     System.out.println("padding: "+p);
     // reception report count
     int rc = (word & 0x0F000000) >>> 24;
     System.out.println("reception report count: "+rc);
     // payload type, which is 200 in this case (SR=200)
     int pt = (0x00FF0000 & word) >>> 16;
     System.out.println("payload type: "+pt);
     // length
     int length = (word & 0x0000FFFF);
     System.out.println("length: "+length);
     // SSRC of sender
     int ssrc = buffer.getInt();
     System.out.println("SSRC: "+ssrc);
     // NTP timestamp
     long ntp_timestamp = buffer.getLong();
     System.out.println("NTP timestamp: "+ntp_timestamp);
     // RTP timestamp
     int rtp_timestamp = buffer.getInt();
     System.out.println("RTP timestamp: "+rtp_timestamp);
     // sender's packet count
     int nbrOfSentPackets = buffer.getInt();
     System.out.println("sender's packet count: "+nbrOfSentPackets);
     // sender's octet count
     int nbrOfSentBytes = buffer.getInt();
     System.out.println("sender's octet count: "+nbrOfSentBytes);
}I added a boolean isRTCP to the constructor so to know what sort of data is sent.
Hope this clarifies things.

New info about the whine, could this be true?

We all call the whine you get when your are idle called the CPU whine. I believe we discussed how the spinning or some field that produces the sound that we hear. Well according to one person at the apple store he says it is coming from this speakers. He said that the "tiny electromagnetic field that the processor creates has some how maybe through wireing or that the speaker is so close to the field that the speaker amplifies the sound." Now what I want to know is if this could be true or this could be the case. If it is the case, the problem might be a little easier to fix, but then again, why does it go away at different times? And I quote again "different usages could create a different field which would produce a different sound." Well this is deffinately a new idea that I don't remember talking about.

The Power converter is the most likely source of the whine (singing). When you run a CPU intesive app., the CPU is drawing more power, causing the power converter's operating point to change. It's probably still singing, just a tune higher than you can hear.
The AC Power converter is a Switched converter (transistors called FETs are turned on and off to "chop-up" the AC source voltage/current,) and this allows the converter to change the Power from 115V AC to say 9-12V DC.
The switching frequency (or a harmonic of that frequency) is what you are hearing, and specifically what your are hearing is either the vibration of the plates or the copper coils in a transformer.
Common switching frequencies of AC/DC converters today is typically anywhere from 100KHz up to several megahertz (MHz.) It turns out that the higher the switching frequency, the smaller you can make the Power Brick. Human Hearing is usually in the 10Hz to 20KHz (for the gifted.)

Need info about the parameter _FIX_CONTROL in a BW environment

Hi ,
I have done some research about the parameter FIXCONTROL and went through the SAP note 1165319.
We have a task at hand where SAP has recommended a new value to be added to this parameter in a BW production environment.
Now in the above note there are an entire set of values which this parameter can take up.
I have understood to some extent that this has to do with this Fixes if case of any issues.
last month we have upgraded the oracle version of the database from 10.2.0.2 to 10.2.0.4.
Can anyone help me in understanding what this MergeFix is all about?
I need to better understand this concept.
Thank you.
Regards,
Hari Kishan.

Hello,
still not sure if I fully understood your question; but the recommended approach regarding patches is:
1) Apply all the interim patches recommended by SAP. For Oracle 10.2.0.4 these will those from SAP note 1137346. The merge fix from SAP note also 1165319 is mentioneded there.
And by the way, SAP note 1137346 is updated about once a month; new patches may be added, old ones may be removed. SAP recommends to follow accordingly; but if there aren't any problems, you might want to you keep your current state for a longer period.
2) Read all the SAP notes mentioned there. You may have to do additional tasks like setting Oracle parameters, FIXCONTROL or others. The value you have to set now may or may not be mentioned in one of these notes, I can't know.
3) If you encounter some problem, first search in SAP notes, or if necessary open a support call with SAP. You may then have to apply additional patches and set addtional values for FIXCONTROL.
And yes, this way the list of required patches may become specific to each customer, as customer requirements are specific.
But it would be difficult to find the exact list of needed patches in advance.
I think a BW consultant who is familiar with Oracle installations will tell you something similar. One who is very experienced in your scenario might also be able to recommend additional patches in advance.
regards

Error handling: Customizing error details: Info about the the path to the VI which has thrown the error

Hi,
I need a quick advice about how to display in the error cluster the information about the path and VI which has thrown an error.
When I don't prepare my own error message, and the error is captured automatically, the information about the path, Vi name and calling VIs is presented automatically.
When I prepare/define my own basic error cluster I have only what I define in the string part of the cluster.
How to cause tha apperance the path and VI name in my defined error message?

MimiKLM wrote:
You mean this link
That's helpful too but, I had read "When I prepare/define my own basic error cluster I have only what I define in the string part of the cluster" as you wanted to use a file to expose those custom error codes and ultimately ship them with your solution dynamically rather than statically
The error ring will pick up any custom errors you define in the error file(s). Including formatting! this then populates the explain errors and error dialogs just like any error definition that ships with any LabVIEW component or toolkit.
Certainly, an error ring can also STATICALLY define or re-define an error within the application instance the ring is called from. Those Error Rings are quite flexible!
Jeff

Where can I find Info about the Integration on SAP?

Hi,
I´m looking for Info about:
-Integration of SAP Backend (R/3, BW, CRM)
-Integration with Legacy or 3rd party Apps
I´m just finding pieces of info and not a document.
Do you know if there are SAP Guidelines or whitepapers on this issues?
I really Apreciate the Help!
Kind Regards,
Gerardo

Hi Gerardo,
welcome to the SDN Forums first. For R/3 to CRM connectivity I would suggest that you read the Doucuments coming <a href="http://help.sap.com/bp_crmv340/CRM_DE/html/opport.htm">SAP Best Practices for Customer Relationship Management - V3.40</a> in the Building Blocks:
B01: CRM Generation
C71: CRM Connectivity
B09: CRM Replication
You find a documentation about the Integaration of R/3 and CRM.
Regards
Gregor

Need info about the integration Process.

HI ,
I would like to know about the different components of Integration Process like about the Receiver etc..
and how do we relate the properties of each component with the container.
Thanks in advance

hi Syed
An integration process is an executable, cross-system process for processing messages. In an integration process you define all the process steps that are to be executed and the parameters relevant for controlling the process.
You implement integration processes when you want to define, control, and monitor complex integration processes that extend across enterprise and application boundaries. The design and processing of integration processes is also known as cross-component Business Process Management (cross-component BPM, ccBPM).
http://help.sap.com/saphelp_nw04/helpdata/en/68/6bfd3f9149ca42e10000000a1550b0/frameset.htm
follow this thread to learn how to define an IP
http://help.sap.com/saphelp_nw04/helpdata/en/68/6bfd3f9149ca42e10000000a1550b0/frameset.htm
You use a correlation to assign messages that belong together to the same process instance. A correlation joins messages that have the same value for one or more XML elements. A correlation is therefore a loose coupling of messages: at design time, it enables you to define which message a receive step must wait for, without knowing the message ID
http://help.sap.com/saphelp_nw04/helpdata/en/68/6bfd3f9149ca42e10000000a1550b0/frameset.htm
regards
sandeep
If helpful reward points

Get more info about the last errors in Oracle

Hi all,
There is a log in a live system where it is possible to see every minute the following error:
Sweep Incident[48073]: failed, err=[1858]
I know that error can happen mainly when:
1. Trying to insert caracter field in a numeric column
2. Using in the wrong way the function to_date()
I need more information about that error, what can be causing the error in the system and why. Is it possible to see more information about the last errors in Oracle? For example, if a query produces an error... is it possible to see in Oracle the error and the query that caused the error?
Hope you can help me.
Thanks in advance.

Thanks Niall.
I'm not sure if I got you...
What I found is that MMON makes snapshots of the database 'health' and stores this information in the AWR. So, it seems like in the database there could be a numeric column that is storing character fields, and when MMON works, it finds that error... is that right?
I found the following information:
SQL> select substr(s.username,1,18) username,
2 substr(s.program,1,22) program,
3 decode(s.command,
4 0,'No Command',
5 1,'Create Table',
6 2,'Insert',
7 3,'Select',
8 6,'Update',
9 7,'Delete',
10 9,'Create Index',
11 15,'Alter Table',
12 21,'Create View',
13 23,'Validate Index',
14 35,'Alter Database',
15 39,'Create Tablespace',
16 41,'Drop Tablespace',
17 40,'Alter Tablespace',
18 53,'Drop User',
19 62,'Analyze Table',
20 63,'Analyze Index',
21 s.command||': Other') command
22 from
23 v$session s,
24 v$process p,
25 v$transaction t,
26 v$rollstat r,
27 v$rollname n
28 where s.paddr = p.addr
29 and s.taddr = t.addr (+)
30 and t.xidusn = r.usn (+)
31 and r.usn = n.usn (+)
32 order by 1;
USERNAME PROGRAM COMMAND
oracle@airvs1b (MMON) No Command
SQL> select addr, pid, spid, username, serial#, program,traceid, background, latchwait, latchspin from v$process where program='oracle@airvs1b (MMON)';
ADDR PID SPID USERNAME SERIAL# PROGRAM
000000044A4E48A8 24 15372 oracle 1 oracle@airvs1b (MMON)
TRACEID B LATCHWAIT LATCHSPIN
---------------- ---------- ------------------------ --------------- 1
SQL> select
2 substr(a.spid,1,9) pid,
3 substr(b.sid,1,5) sid,
4 substr(b.serial#,1,5) ser#,
5 substr(b.machine,1,6) box,
6 substr(b.username,1,10) username,
7 b.server,
8 substr(b.osuser,1,8) os_user,
9 substr(b.program,1,40) program
10 from v$session b, v$process a
11 where
12 b.paddr = a.addr
13 and a.spid=15372
14 order by spid;
PID SID SER# BOX USERNAME SERVER OS_USER PROGRAM
15372 1082 1 airvs1 DEDICATED oracle oracle@airvs1b (MMON)
Is there any way I can see what MMON is doing and when is failing?
Thank you very much.
Edited by: user11281526 on 19-jun-2009 5:18

System calls - Info about the ABIs : common x32 64

Similar Messages

Maybe you are looking for