"System cannot connect to the application server" (Admin Client only)

Hello Experts,
I have a strange issue: I am getting "system cannot connect to the application server" when I am trying to launch BPC Admin.
I successfully connect to the same application server with Excel client on the same PC.
I am able to connect via Admin from another PC.
The installation in question is a new installation. The only difference between my PC and a troubled one is IE7 vs. IE8 - IE8 is the one giving issues.
BPC site is in Local Intranet zone. Windows Authentication is enabled. What am I missing? Local Policy? IE8 settings? Folder permissions (I'm local admin on both PCs)?
It's BPC 7.5 SP05.
Thanks in advance,
Akim
P.S. OS: Windows Server 2003 SP2 32-bit (Citrix box).
Edited by: Akim Zubarchuk on Mar 30, 2011 12:28 AM

Hi Akim,
Check client diagnostic for admin client can provide good information.
Any way if you are able to connect with excel client not with admin client I will say:
1. Check the rights of user used to connect with admin console
2. Check proxy settings
3. Disable antivorus or firewall into that computer.
4. Make sure the installation of admin client was correct done.
In my opinion it is a big probability to be point 3 or 4.
Regards
Sorin Radulescu

Similar Messages

The system cannot connect to the Application Server

Hello Everybody,
I have a problem when connecting to my BPC Application.
I get the following error when trying to open BPC:
"The system cannot connect to the (http://xxxxxx) Application Server. Verify that you have specified a valid Application server name, or see if the application server is unavailable at this time."
We have to reboot the application server to have acces again to the application.
The osoft website was also unavailable.
The server diagnosotic was OK.
And when consulting the tblLogs table I found this message:
==============[System Error Tracing]==============
[System Name] : ApplicationService [Message Type] : ErrorMessage [Job Name]     : OSoft.Services.Webservice.ApplicationService.ApplicationService.Query() [DateTime]     : 1/3/2011 4:27:35 PM [UserId]       : GROUPE\Deshors [Exception]       DetailMsg : {System.NullReferenceException: Object variable or With block variable not set.     at Microsoft.VisualBasic.CompilerServices.Symbols.Container.InvokeMethod(Method TargetProcedure, Object[] Arguments, Boolean[] CopyBack, BindingFlags Flags)     at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)     at OSoft.Services.Webservice.ApplicationService.ApplicationService.ValidateUser()     at OSoft.Services.Webservice.ApplicationService.ApplicationService.Query(String strQueryType, String strParameter, String strContext, String strSecurity)}
==============[System Error Tracing End ]==============
==============[System Error Tracing]==============
    [System Name] : Configuration [Message Type] : ErrorMessage [Job Name]     : ServerDefault.GetValue [DateTime]     : 1/3/2011 4:40:08 PM [UserId]       :   [Exception]       DetailMsg : {System.Exception: Cannot create ActiveX component.     at Microsoft.VisualBasic.Interaction.CreateObject(String ProgId, String ServerName)     at OSoft.Services.Application.Configuration.ServerDefault.GetValue(String strKeyId)}
==============[System Error Tracing End ]==============
Any help?
Thank you in advance.

Hi expert,
Unfortunately, we still encounter the issue !!
We get Unhandled exceptions in the W3WP.EXE process, but the IIS logs do not show anything wrong.
Here is the Windows event warning message we get :
Event code: 3005
Event message: An unhandled exception has occurred.
Event time: 1/31/2011 11:43:11 AM
Event time (UTC): 1/31/2011 10:43:11 AM
Event ID: 0295c38777734029a3cec37ec035fa45
Event sequence: 8
Event occurrence: 1
Event detail code: 0
Application information:
    Application domain: /LM/W3SVC/1/ROOT/OSoft-1-129409441580590866
    Trust level: Full
    Application Virtual Path: /OSoft
    Application Path: C:\PC_MS\Websrvr\Web\
    *Machine name: **************
Process information:
    Process ID: 4323
    Process name: w3wp.exe
    Account name: NT AUTHORITY\NETWORK SERVICE
Exception information:
    Exception type: Exception
    Exception message: Invalid UserID
Request information:
    Request URL: http://localhost/Osoft/Launch.aspx
    Request path: /Osoft/Launch.aspx
    User host address: ::1
    User:*******\Administrator
    Is authenticated: True
    Authentication Type: Negotiate
    Thread account name: NT AUTHORITY\NETWORK SERVICE
Thread information:
    Thread ID: 12
    Thread account name: NT AUTHORITY\NETWORK SERVICE
    Is impersonating: False
    Stack trace:    at Microsoft.VisualBasic.CompilerServices.Symbols.Container.InvokeMethod(Method TargetProcedure, Object[] Arguments, Boolean[] CopyBack, BindingFlags Flags)
   at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)
   at OSoft.Consumers.ZFP.WebBase.Utility.GetLastUserApp(CPMUser& mUser, String strAppServerURL, String strSecurity, String strContext, Boolean bServerPathReset)
   at OSoft.Consumers.ZFP.WebBase.PageBase.Page_Init(Object sender, EventArgs e)
   at System.EventHandler.Invoke(Object sender, EventArgs e)
   at System.Web.UI.Control.OnInit(EventArgs e)
   at System.Web.UI.Page.OnInit(EventArgs e)
   at OSoft.Consumers.ZFP.WebBase.PageBase.OnInit(EventArgs e)
   at System.Web.UI.Control.InitRecursive(Control namingContainer)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Thanks in advance for your help
Lionel

Applicaton Catalog - "Cannot connect to the application server" - Existing solutions have not worked

Hi there,
I have researched the problem below extensively online and found quite a varies array of solutions offered however they all seem to relate to the problem in that someone was setting up SCCM but couldn't get it to work. My situation is different in that the
feature was working, no settings were changed however it has now stopped working.
The issue is that if any user attempts to use the app catalog, they are shown the error screen which says "Cannot connect to the application server". It then says the problem might be temporary, try again later etc however it's not temporary.
All the settings for the app catalog appear to be correct, as I would expect them to be as it was working (I am new to this company, the Desktop manager has told me it was working a few weeks ago).
Does anyone know of a service in Windows, maybe something to do with the SQL side or certificates that could cause this issue? (although I checked certificates and again, looks fine). I'm almost at the point now of just restarting the server because
if all else fails, turn it off and on again right?
Cheers all.

Hi, I just typed a long reply to this and then accidentally clicked a favourite on the Favourites bar and lost everything I typed :(
-Checked the path in IIS to the \SMS_CCM\CMApplicationCatalog folder was OK and it was.
-Checked that required .NET components including WCF are installed.
-This one seemed a bit strange but ensured local service account has access to C:\Windows\Temp (this seemed very basic and unlikely but I tried it anyway due to desperation).
-Checked that self-signed certificate was trusted by my PC attempting to access the App Catalog.
-Checked SCCM services on the server are all running (where they should be, or set to manual as appropriate).
I'm sure I've tried more than this, but these are the main things I can remember.
Cheers.

Installation of Cumulative Update 2 for SCCM 2012 R2 causes Application Catalog error Cannot connect to the application server"

I have update my primary server with cu2. Rebooted it when requested. Now everything appears to work except Application Catalog. I am getting HttpSendRequestSync failed errors in sms_awebsvc_control_manager and SMS_MP_CONTROL_MANAGER. Permissions
for the temp folder and the 2 service folders do have local service and system with full control. I reregistered .net 4 with aspnet_regiis -i -enable. Rebooted and no change. application pool is running. The install logs said it is
working. SQL is happy. I have reinstalled the two Application Catalog service points varous ways and they always come back with warm fuzzy logs stated they installed.
When someone tries to use Application Catalog the ServicePortalWebSite.log always produces the following errors:
[15, PID:9160][09/22/2014 15:32:27] :Passed in language: en-US
[15, PID:9160][09/22/2014 15:32:27] :Language resolved to: en-US
[15, PID:9160][09/22/2014 15:32:27] :SoftwareCatalog website - requested resource: ~/, api-version: ""
[16, PID:9160][09/22/2014 15:32:27] :Passed in language: en-US
[16, PID:9160][09/22/2014 15:32:27] :Language resolved to: en-US
[16, PID:9160][09/22/2014 15:32:27] :SoftwareCatalog website - requested resource: ~/, api-version: ""
[16, PID:9160][09/22/2014 15:32:27] :Passed in language: en-US
[16, PID:9160][09/22/2014 15:32:27] :Language resolved to: en-US
[16, PID:9160][09/22/2014 15:32:27] :SoftwareCatalog website - requested resource: ~/default.aspx, api-version: ""
[16, PID:9160][09/22/2014 15:32:27] :Got 5.0.7958.1000 build version
[11, PID:9160][09/22/2014 15:32:28] :Passed in language: en-US
[11, PID:9160][09/22/2014 15:32:28] :Language resolved to: en-US
[11, PID:9160][09/22/2014 15:32:28] :SoftwareCatalog website - requested resource: ~/ApplicationViewService.asmx, api-version: "1.0"
[7, PID:9160][09/22/2014 15:32:28] :Passed in language: en-US
[7, PID:9160][09/22/2014 15:32:28] :Language resolved to: en-US
[7, PID:9160][09/22/2014 15:32:28] :SoftwareCatalog website - requested resource: ~/ApplicationViewService.asmx, api-version: "1.0"
[11, PID:9160][09/22/2014 15:32:28] :ApplicationViewService.asmx - begin GetMobileApplicationValuesForProperty for property:Category, filter None
[11, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - retrieving client proxy using endpoint SecureBinding_IApplicationOfferService
[15, PID:9160][09/22/2014 15:32:28] :Passed in language: en-US
[15, PID:9160][09/22/2014 15:32:28] :Language resolved to: en-US
[15, PID:9160][09/22/2014 15:32:28] :SoftwareCatalog website - requested resource: ~/ApplicationViewService.asmx, api-version: "1.0"
[11, PID:9160][09/22/2014 15:32:28] :FindCertificate - Found certs via FindByThumbprint, count = 1
[11, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - opening channel via client proxy
[15, PID:9160][09/22/2014 15:32:28] :ApplicationViewService.asmx - begin GetApplications, startItem = 0, search text = ''
[7, PID:9160][09/22/2014 15:32:28] :ApplicationViewService.asmx - begin GetMobileApplicationValuesForProperty for property:Category, filter None
[7, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - retrieving client proxy using endpoint SecureBinding_IApplicationOfferService
[15, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - retrieving client proxy using endpoint SecureBinding_IApplicationOfferService
[7, PID:9160][09/22/2014 15:32:28] :FindCertificate - Found certs via FindByThumbprint, count = 1
[7, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - opening channel via client proxy
[15, PID:9160][09/22/2014 15:32:28] :FindCertificate - Found certs via FindByThumbprint, count = 1
[15, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - opening channel via client proxy
[11, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
Server stack trace:
at System.ServiceModel.Security.IssuanceTokenProviderBase`1.DoNegotiation(TimeSpan timeout)
at System.ServiceModel.Security.SspiNegotiationTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Security.TlsnegoTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SymmetricSecurityProtocol.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.Connection.DefaultApplicationOfferService.Open()
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.AppView.GetApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetMobileApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter, String reserved)System.Net.WebException: The remote server returned
an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
[11, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
Server stack trace:
at System.ServiceModel.Security.IssuanceTokenProviderBase`1.DoNegotiation(TimeSpan timeout)
at System.ServiceModel.Security.SspiNegotiationTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Security.TlsnegoTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SymmetricSecurityProtocol.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.Connection.DefaultApplicationOfferService.Open()
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.AppView.GetApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetMobileApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter, String reserved)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetApplicationValuesForProperty(ApplicationProperty propertyName, String reserved)System.Net.WebException: The remote server returned an error: (500) Internal Server
Error.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
[7, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 15px 10px 15px;}
.summary-container fieldset{padding-bottom:5px;margin-top:4px;}
legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;}
legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px;
border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696;
border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
Server stack trace:
at System.ServiceModel.Security.IssuanceTokenProviderBase`1.DoNegotiation(TimeSpan timeout)
at System.ServiceModel.Security.SspiNegotiationTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Security.TlsnegoTokenProvider.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SymmetricSecurityProtocol.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.Connection.DefaultApplicationOfferService.Open()
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.AppView.GetApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter)
at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetMobileApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter, String reserved)System.Net.WebException: The remote server returned
an error: (500) Internal Server Error.
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
[7, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title>
<style type="text/css">
<!--
body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;}
code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;}
.config_source code{font-size:.8em;color:#000000;}
pre{margin:0;font-size:1.4em;word-wrap:break-word;}
ul,ol{margin:10px 0 10px 40px;}
ul.first,ol.first{margin-top:5px;}
fieldset{padding:0 1
Any feedback is appreciated.
Mike In Vancouver

The following repeats hourly since installing Cumulative Update 2 in the log awebsctl.log:
Completed the AWEBSVC availability check against local computer.
SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 5:09:45 AM
4436 (0x1154)
Waiting for changes for 60 minutes SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 5:09:45 AM 4436 (0x1154)
Timed Out... SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Starting certificate maintenance... SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Certificate (0x3adbdab0) is Exportable SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Successfully granted permission to certificate
SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 6:09:45 AM
4436 (0x1154)
Successfully completed certificate maintenance
SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 6:09:45 AM
4436 (0x1154)
SSL is not enabled. SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
AWEBSVCs http check returned hr=0, bFailed=1
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
Health check request failed, status code is 500, 'Internal Server Error'.
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
STATMSG: ID=8100 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_AWEBSVC_CONTROL_MANAGER" SYS=server.site.com SITE=ABC PID=3000 TID=4436 GMTDATE=Tue Sep 23 13:09:45.600 2014 ISTR0="500" ISTR1="Internal Server Error"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM
4436 (0x1154)
Completed the AWEBSVC availability check against local computer.
SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 6:09:45 AM
4436 (0x1154)
Waiting for changes for 60 minutes SMS_AWEBSVC_CONTROL_MANAGER
9/23/2014 6:09:45 AM 4436 (0x1154)
Mike In Vancouver

Application Catalog - Cannot connect to the Application Server (SQL related?)

Hi,
There are many posts on this topic, and I've gone through all the various checks and workarounds but I still have the same problem. Essentially my Application Catalog seems to be working to a point, but when it attempts to connect to the SQL DB to check
what apps are assigned for the user it seems to then fall over.
This is the extract from the ServicePortalWebService.log file. There are a few exceptions around failing to exectute the DB procedure and again when connecting to SQL server.
I've checked the IIS Site and the connection string for for CMApplicationCatalogSvc seems to be correct.
Has anyone else experienced this?
[19, PID:1188][05/30/2013 13:57:31] :ApplicationOfferService - (SCCM\SCCMInstall) GetApplications call
[20, PID:1188][05/30/2013 13:57:31] :ApplicationOfferService - (SCCM\SCCMInstall) GetApplicationValuesForProperty call
[20, PID:1188][05/30/2013 13:58:21] :Failed to execute the DB procedure get the application values for a property
[20, PID:1188][05/30/2013 13:58:21] :User = S-1-5-21-211678148-561541944-1432470842-1109
[20, PID:1188][05/30/2013 13:58:21] :System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct
and that SQL Server is configured to allow remote connections. (provider: Shared Memory Provider, error: 40 - Could not open a connection to SQL Server)
   at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at Microsoft.ConfigurationManager.SoftwareCatalog.Service.SqlDatabase.GetNewOpenConnection()
   at Microsoft.ConfigurationManager.SoftwareCatalog.Service.SqlDatabase.ExecuteReader(DbCommand command)
   at Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationHandler.GetApplicationValuesForProperty(UserContext userContext, ApplicationProperty property)
   at Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationOfferService.GetApplicationValuesForProperty(UserContext userContext, ApplicationProperty propertyName, String reserved)
[20, PID:1188][05/30/2013 13:58:21] :An exception has been thrown from the service: System.ServiceModel.FaultException`1[[Microsoft.ConfigurationManager.SoftwareCatalog.Service.ServiceError, Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationOfferContract,
Version=5.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]: Internal Server Error
   at Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationOfferService.GetApplicationValuesForProperty(UserContext userContext, ApplicationProperty propertyName, String reserved)
   at SyncInvokeGetApplicationValuesForProperty(Object , Object[] , Object[] )
   at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
   at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
   at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
   at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc& rpc)
   at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)
[19, PID:1188][05/30/2013 13:58:21] :Failed to execute the DB procedure to get applications targetted at a user
[19, PID:1188][05/30/2013 13:58:21] :User = S-1-5-21-211678148-561541944-1432470842-1109
[19, PID:1188][05/30/2013 13:58:21] :System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct
and that SQL Server is configured to allow remote connections. (provider: Shared Memory Provider, error: 40 - Could not open a connection to SQL Server)
   at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at Microsoft.ConfigurationManager.SoftwareCatalog.Service.SqlDatabase.GetNewOpenConnection()
   at Microsoft.ConfigurationManager.SoftwareCatalog.Service.SqlDatabase.ExecuteReader(DbCommand command)
   at Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationHandler.GetApplicationValuesForProperty(UserContext userContext, ApplicationProperty property)
   at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
   at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
   at System.Data.SqlClient.SqlConnection.Open()
   at Microsoft.ConfigurationManager.SoftwareCatalog.Service.SqlDatabase.GetNewOpenConnection()
   at Microsoft.ConfigurationManager.SoftwareCatalog.Service.SqlDatabase.ExecuteReader(DbCommand command)
   at Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationHandler.GetApplicationOffers(Int32& totalNumberRows, UserContext userContext, ApplicationProperty sortBy, ApplicationFilter filterBy, String searchBy, Int32 totalNumberOfRowsPerPage,
Int32 startRowIndex, Boolean sortAscending, ApplicationClassicDisplayName classicNameFields, Boolean useSecondarySort, Platforms platformFilter)
   at Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationOfferService.GetApplications(Int32& totalNumberRows, UserContext userContext, ApplicationProperty sortBy, ApplicationFilter[] filterBy, String queryString, Int32 maximumRows,
Int32 startRowIndex, Boolean sortAscending, ApplicationClassicDisplayName classicNameFields, Boolean useSecondarySort, Platforms platformFilter, String reserved)
[19, PID:1188][05/30/2013 13:58:21] :An exception has been thrown from the service: System.ServiceModel.FaultException`1[[Microsoft.ConfigurationManager.SoftwareCatalog.Service.ServiceError, Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationOfferContract,
Version=5.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]: Internal Server Error
   at Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationOfferService.GetApplications(Int32& totalNumberRows, UserContext userContext, ApplicationProperty sortBy, ApplicationFilter[] filterBy, String queryString, Int32 maximumRows,
Int32 startRowIndex, Boolean sortAscending, ApplicationClassicDisplayName classicNameFields, Boolean useSecondarySort, Platforms platformFilter, String reserved)
   at SyncInvokeGetApplications(Object , Object[] , Object[] )
   at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
   at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
   at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
   at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc& rpc)
   at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)
Thanks,

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Did you check the firewall on you SQL server? What rights does the user (S-1-5-21-211678148-561541944-1432470842-1109) have within SQL?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

BPC 75M - Modify Application error "Cannot connect to the Reporting Server"

I have trouble with Modify Application, also in ApShell. Maybe you have a clue what it can be the problem.
Configuration: single server BPC 7.5M SP3, Windows Server 2008 SP2, SQL Server 2008 SP2
Installation user is a domain user.
No errors during installation, no error in Server Manager diagnostics.
But when I try to modify an Application from BPC Admin it gives an error for step "Make OLAP database and Journal/Audit reports. / Validate dimension formulas.".
In tblLogs I see the error message:
==============[System Error Tracing]============== [System Name] :
AdminServerHandler [Message Type] : ErrorMessage [Job Name] :
AdminApplicationHandler : ExecuteModIfyApplication [DateTime] :
10/19/2010 1:19:13 PM [UserId] : MYDOMAIN\MYUSER
[Exception] DetailMsg : {System.Exception: Cannot connect to the Reporting Server at
OSoft.Services.Application.AdminMainServer.AdminApplicationHandler.SetChangeDimensionForAudit(String strAppset, String strApp, String strUserID, Boolean blnIsChangedDimension, String& strErrMsg) at
OSoft.Services.Application.AdminMainServer.AdminApplicationHandler.ExecuteModIfyApplication(String strAppSet, String strApplicationName, String strApplicationDescription, String strSourceApplicationType, String
strNewApplicationType, String strRateApplicationName, String
strOwnerShipApplicationName, String strCurrencyConversionsCalculation,
String strCalculation, String strIntercompanyBookings, String
strUSEliminations, String strOpeningBalance, String strValidations,
String strIntercompanyEliminations, DataTable dtDimensionList, Boolean
bReassignSQLIndex, Boolean bProcessApplication, Boolean bDeleteFact,
String strChangeAppType, String strUserID, String strReportBackID)}
==============[System Error Tracing End ]==============
Edited by: Alexandru Berindei on Oct 26, 2010 7:57 PM
Edited by: Alexandru Berindei on Oct 26, 2010 7:58 PM

There were problems accessing the web page   HTTP://server/reports
Error message:   "Reporting services 2008 user does not have required permissions"
It was possible to open the page HTTP://server/reports with local administrator user and I fixed this problem by performin following:
- add Content Manager right to bpc installation user
- disable UAC from Windows Control Panel > User Accounts
Still Modify Application gives the same "Cannot connect to Reporting Services".
I tried:
- check that BPC Installation User is part of Local Administrators
- reboot server
- reinstall BPC after disabling UAC
- reinstall everything except the Windows Server 2008
- I installed another computer with the same exact configuration but with a local BPC Installation User and it works.
Have anyone installed BPC 7.5M SP3 on single Windows Server 2008 SP2 , with SQL Server 2008 SP2 and with BPC Installation user a domain user?
Maybe you have an idea of what I should check next.
Thank you,
Alex

BPC Excel: The system cannot connect to the server. There might be network

Hi Guys,
I get the following error when i try to connect to BPC Excel: The system cannot connect to the server. There might be network or security issue.
This only happen on clients machines, I have installed the client tools on the server and tested, i can connect to Excel but not on the machine. My MS office version is the same as the one on the server. BPC is ver 5.04
Has anyone experienced the same problem.
your help will be greatly appreciated.

Let me summarize your issue to see if I may help. If I cannot, then you will need to work with SAP Support on the connection problem.
- You have a single or multi-server setup?
- Installed using BPC 5.1 SP3, (or 5.0.502) correct?
- You can enter the BPC on the server, both via BPC Excel and BPC Admin?
- When you initiate BPC Admin on your client, so can connect to the Server and perform Admin operations?
- When you initiate BPC for Excel, and walk through the connection wizard, you cannot connect to the server?
- When you are in the Connection Wizard, are you using a path or a Server designation?
- Is the system on a single domain?
- When you added users to the Admin Security profile, they were selected from a DOMAIN?
- You have processed security and assigned ALL TASKS currently and processed the MEMBER ACCESS profiles, yes?
After all of this, have you uninstalled 1 BPC client, cleared the ProgramFiles/BPC folder, and deleted the local stored BPC information? If you haven't, just for simplification, I would attempt this process.
You also hae read all the SAP Support Notes regarding using Excel2007 with BPC and the issues you may experience?
Please let me know and maybe we can help.

The system cannot connect to the server

Hi Experts,
when I set BPC for Excel connection by connection wizard, I can connect to server and get application set list, but when I login application set, the system show me the message("The system cannot connect to the server"), and log off! how can I fix this problem? is it a firewall issue?
best regards
evans

Hi,
Can you compare your macro setting (Security level )compare to the system in which BPC is working. Or try as follows:
1. Unistall BPC
2. Restart system
3.Install BPC
hope it works...
regards,
Raju

Cannot connect to the Administration server?

I just installed Hyperion 11.1.2 in Windows 2008, and I'm sure the essbase server is started because I can connect by MaxL, and I can see the Administration server service is started because I can see it in the service list. But When I want to login ADM, error messageL "Cannot connect to the Administration server", please advise?
Error: java.lang.UnsatisfiedLinkError: no environmentjni in java.library.path
java.lang.NoClassDefFoundError: com/essbase/eas/utils/Environment
Error detail:
2010-04-23T23:24:59.576-04:00] [EssbaseAdminServices0] [WARNING] [] [oracle.epm.essbase.eas] [tid: 11] [userId: <anonymous>] [ecid: 0000IWhqB6yDwWWFLzNM8A1BoaI7000000,0] [APP: EAS#11.1.2.0] java.library.path=E:\Oracle\Middleware\user_projects\domains\EPMSystem\bin;.;C:\Windows\system32;C:\Windows;E:\Oracle\Middleware\jrockit_160_14_R27.6.5-32\jre\bin;E:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\native;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;E:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\bin;E:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\bin;E:\Oracle\MIDDLE~1\JROCKI~1.5-3\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;E:\Oracle\Middleware\EPMSystem11R1\common\config\11.1.2.0;E:\Oracle\Middleware\EPMSystem11R1\common\CSS\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\SAP\bin;E:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\JRE\Sun\1.6.0\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;D:\app\serv_hyperion\product\11.2.0\client_1\bin;D:\app\serv_hyperion\product\11.2.0\dbhome_1\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Program Files\Intel\DMIX;E:\Oracle\Middleware\EPMSystem11R1\common\EssbaseRTC-64\11.1.2.0;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Common;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Client;E:\Oracle\Middleware\EPMSystem11R1\products\FinancialManagement\Server;E:\Oracle\Middleware\ohs\bin;E:\Oracle\Middleware\ohs\opmn\bin;E:\Oracle\Middleware\ohs\opmn\lib;E:\Oracle\Middleware\ohs\perl\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin\SQR\Activator\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin\SQR\Viewer\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\lib;E:\OraHome_1\oracledq\tsq11r5s\Software;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\Wbem;D:\app\serv_hyperion\product\11.2.0\dbhome_1\BIN;D:\app\serv_hyperion\product\11.2.0\client_1\BIN;E:\Oracle\Middleware\EPMSystem11R1\BIN;E:\Oracle\Middleware\EPMSystem11R1\common\CSS\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin;E:\OraHome_1\oracledq\tsq11r5s\Software;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\Wbem;D:\app\serv_hyperion\product\11.2.0\dbhome_1\BIN;D:\app\serv_hyperion\product\11.2.0\client_1\BIN;E:\Oracle\Middleware\EPMSystem11R1\BIN;E:\Oracle\Middleware\EPMSystem11R1\common\CSS\11.1.2.0\bin;E:\Oracle\Middleware\EPMSystem11R1\common\ODBC-64\Merant\6.0\Drivers;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\console\bin;E:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\server\bin;E:\Oracle\Middleware\EPMSystem11R1\products\biplus\bin;E:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8
[2010-04-23T23:24:59.576-04:00] [EssbaseAdminServices0] [ERROR] [ESSEAS-00100] [oracle.epm.essbase.eas] [tid: 11] [userId: <anonymous>] [ecid: 0000IWhqB6yDwWWFLzNM8A1BoaI7000000,0] [APP: EAS#11.1.2.0] Unknown error occurred. See below stack trace for details[[
java.lang.UnsatisfiedLinkError: no environmentjni in java.library.path
Edited by: user2571802 on May 8, 2010 2:01 PM
Edited by: user2571802 on May 8, 2010 6:52 PM

I too am getting the same error. When i click the validate 'Validate essbase connection' on the application wizard page, I get a blank page saying 'An errror occured'. I stop the planning service and restarted it from Start button. This time I got the error message
[ERROR] [HspCreateDatasource] - Servlet.service() for servlet HspCreateDatasourc
e threw exception <java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.libr
ary.path>java.lang.UnsatisfiedLinkError: no HspEssbaseEnv in java.library.path
at java.lang.ClassLoader.loadLibrary(Unknown Source)
at java.lang.Runtime.loadLibrary0(Unknown Source)
at java.lang.System.loadLibrary(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseEnv.<clinit>(Unknown Source)
at com.hyperion.planning.olap.HspEssbaseJniOlap.<clinit>(Unknown Source)
at com.hyperion.planning.HspJSHomeImpl.TestEssConnection(Unknown Source)
at HspCreateDatasource.doCheckEssbaseConnection(Unknown Source)
at HspCreateDatasource.doHandle(Unknown Source)
at HspCreateDatasource.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Appl
icationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationF

No trusted certificate found (91);Cannot connect to the LDAP server

HI All,
I am trying to connect to LDAP server with the following code.
JSSESocketFactory fact = null;
private LDAPConnection conn = null;
String keystore = "C:\\j2sdk1.4.2_15\\jre\\lib\\security\\cacerts";
System.setProperty("javax.net.ssl.trustStore",keystore);
fact = new JSSESocketFactory(null);
conn = new LDAPConnection(fact);
int ldapVersion = 3;//LDAPConnection.LDAP_V3; //defualt values of LDAP settings
private int ldapPort = 636;
LDAPAttributeSet ldapAtrbSet;
String ldapHost;
String loginDN;
String loginDN_Password;
And it is gicving me error :
Error: netscape.ldap.LDAPException: SSL connection to 192.168.10.8:636, sun.security.validator.ValidatorException: No trusted certificate found (91); Cannot connect to the LDAP server
netscape.ldap.LDAPException: SSL connection to 192.168.10.8:636, sun.security.validator.ValidatorException: No trusted certificate found (91); Cannot connect to the LDAP server
     at netscape.ldap.factory.JSSESocketFactory.makeSocket(JSSESocketFactory.java:105)
     at netscape.ldap.LDAPConnSetupMgr.connectServer(LDAPConnSetupMgr.java:418)
     at netscape.ldap.LDAPConnSetupMgr.openSerial(LDAPConnSetupMgr.java:350)
     at netscape.ldap.LDAPConnSetupMgr.connect(LDAPConnSetupMgr.java:244)
     at netscape.ldap.LDAPConnSetupMgr.openConnection(LDAPConnSetupMgr.java:170)
     at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1042)
     at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:924)
     at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:768)
     at com.reflexis.LDAP.LdapTestSSL.createConnection(LdapTestSSL.java:522)
     at com.reflexis.LDAP.LdapTestSSL.checkLdap(LdapTestSSL.java:118)
     at com.reflexis.LDAP.LdapTestSSL.main(LdapTestSSL.java:52)
Unable to connect to LDAP server
I have imported atr certificate also by using command:
"keytool -import -alias jag -file c:\x225.cer -keystore c:\j
2sdk1.4.2_15\jre\lib\security\cacerts"
I am running my java code from eclipse. And do i have to set any thing in eclipse for certificate. I Have imported certificate from command prompt.
Can any one please help me.It is very important for me.
Please its very urgent.
THanks,
Ankush Patni

As previously said network is a possible cause.Other things could be time on filer is too far off time on DC.AD object for filer has been deleted or change by a Windows admin.If all users are experiencing a problem, you may need to rebind it to AD - run CIFS setup at command prompt

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

I installed adobe digital editions but when I want to authorize a device (an e-reader) it doesn't work, I receive an error message that digital editions cannot connect with the activation server. what can I do?

Please quote the exact error message, word-for-word, verbatim.
What is your operating system?
What version of Lightroom?

Acrobat cannot connect to the Review Server

I've been invited to a shared review on Acrobat.com. When I download and open the PDF from the Acrobat.com invitation email, I get this error message:
Acrobat cannot connect to the Review Server: Adobe online services.
If I click the "Check for new comments" button in the upper right corner, I get this message:
Could not get new comments. Acrobat did not get a response from the server. Try again later or contact your system administrator.
I can't see other reviewers' comments and can't post my own. I'm definitely online and connected, so not sure what's happening, but have had this error for several weeks now.
My system:
Acrobat XI Pro
MacBook Pro OS X 10.8.5
Safari browser 6.0.5
My Creative Cloud desktop app says Acrobat XI is up to date. I also have Photoshop CC installed.
I've tried logging into Acrobat.com with my Adobe ID before and after opening the PDF, nothing works. Also tried clearing my cache. Is there something in my Acrobat preferences that could be the issue?
Please help.
Thanks,
Mark

I am having a similar problem. The review was set up as a test. All our PC colleagues can access as normal. Our 2 Mac machines are not having luck.
Acrobat 10.1.8 Pro
Macbookpro OSX 10.8.5
Error: Could not get new comments. Acrobat did not get a response from the server. Try again later or contact your system administrator.
Could not get new comments. Acrobat did not get a response from the server. Try again later or contact your system administrator.
I'm guessing maybe a proxy issue?... what protocol/port is acrobat tryng to use?
(I tried process above with no luck)

Cannot connect to the reporting server error

Hi,
When trying to process an application, I get the error : "cannot connect to the reporting server".
We have the BPC application server on a machine and DB, SSAS and SSRS (SQL 2008) on another machine.
We don't have a named instance, we use the default one.
If I connect to http://%SQLServer%/reports, it works.
What could be the problem ?
Thank you in advance.

Hi,
we had got the same problem. In the end we:
- Installed RS on the same machine of BPC (Application Server) (please be careful to make a new db if you want to use the same DB Server)
- Configured correctly the server manager to point the new ReportServer
- Edited from SQL Server Management Console the tblAppSetInfo, in order to make the column of the ReportServer of all Application Sets to point to the new report server.
- (not sure was needed) rebooted and restarted all the services
- Tested it and it worked!
HTH
Daniele Tiles

I cannot connect with the Mozilla server to update. I'm using Firefox to connect on a dual core iMac on OS 10.6.8.

Every time I try to update Firefox I cannot connect to the Firefox server. the bar just goes and goes and goes. I am on a quad core iMac on OS 10.6.8

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Cannot connect to the report server

I try to submit a report using RWCLIENT (see below), but getting the error:
"REP-0178 Cannot connect to the report server 'rep_M2003-056DVM_ora10gas' "
If I use URL, the report runs fine.
Please advise.
Thanks,
Dmitri
C:\OraDev10g\BIN\rwclient userid=user/password@database module=txr1020 batch=yes paramform=no DESTYPE=LOCALFILE desformat=pdf desname="M:\txr1020.pdf" AUTHID=ias_admin/iasadmin1 server=repser

We have Reports 10.1.2.
RWCLIENT (10g iDS) is installed on different machine.
On OracleAS I have started the Naming Service: namingservice.bat 14021
On client I updated the rwnetwork.conf with OracleAS hostname and 14021.
What is wrong? Maybe I need to start Naming Service using OPMN for report server to register.
Thanks.

"System cannot connect to the application server" (Admin Client only)

Similar Messages

Maybe you are looking for