System cannot find file specified during install officejet 6500

I started my HP solution center software today to do some scanning over my wireless connection. I received a message box indicating I needed to reinstall the original software that came with my OfficeJet 6500 wireless 709n printer. when I started the software it recieved the message 'system cannot find file specified'. No information was given on what file it was looking for. I then downloaded the software from the HP site (OJ_AIO_6500_E709_Full_Win_WW_140_408.exe) and encountered the same result. I hookup up my printer via USB and it appeared to go looking for driver updates. After that the HP solution center software would run but would only connect to my printer if the USB was connected. Still cannot run the printer software set.
I recently upgraded my windows 8 64-bit to window 8.1. It worked before that. This is not the only software that was broken by the process. Any help on how I can re-establish my wireless connection to my Officejet 6500 would be appreciated.
I also tried the Microsoft 'Fixit' solutions but they are not available for windows 8.1 :-)...

Hello All,
Try using the scrubber built into the CD or download.
From original CD installation:
1. Insert CD into drive, and then cancel the installer.
2. Open "Computer", and then right click on the CD drive and choose open.
3. Open folder Util
4. Open folder CCC
5. Run the L3uninstall.exe (near the bottom of the list).
6. When the uninstall has completed restart the computer
7. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
8. Restart the computer.
9. Download and run the HP Printer Install Wizard.
10. When it comes to the screen asking to accept the terms, don't yet. There will be a few options near the top of the Window. I need you to choose "Connection settings" or "Internet connection usage settings" (It will be something similar to what I just stated). It will give you the options to turn off automatic updates, I will need you to change all of these options to "Off" / "No".
11. Once they're set to "Off" / "No", continue with the installation like you did before.
If software was downloaded and extracted to your system:
1. Type %temp% in the run field
2. Look for, and open the folder starting with 7z (Example: 7zS2356)
3. Open folder Util
4. Open folder CCC
5. Run the L3uninstall.exe (near the bottom of the list).
6. When the uninstall has completed restart the computer
7. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
8. Restart the computer.
9. Download and run the HP Printer Install Wizard.
10. When it comes to the screen asking to accept the terms, don't yet. There will be a few options near the top of the Window. I need you to choose "Connection settings" or "Internet connection usage settings" (It will be something similar to what I just stated). It will give you the options to turn off automatic updates, I will need you to change all of these options to "Off" / "No".
11. Once they're set to "Off" / "No", continue with the installation like you did before.
Also, make sure all of the Windows Updates have been completed.
Let me know if this works.
Thank you,
I worked on behalf of HP.

Similar Messages

Error "The System cannot find the specified" when installing XI3.1 FP1.3

Error "The System cannot find the specified" happened when installing XI3.1 FP1.3 to client machine, however the installation is OK to server.
After the error, go to Control Panel -> Add or Remove Programs, and observe.
BusinessObjects Enterprise XI 3.1 Client Tools is installed,
but BusinessObjects Enterprise XI 3.1 Client Tools Japanese Language Pack is not.
And Language Pack install log is not written.
The same error happened when installing .net2.0.
The installation for FP1.2 is OK.
Would you tell me what reason probablely this issue is?
Thanks.

Hello Sarah,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

The system cannot find the specified file

I have tried to download and install a driver for hp officejet 4500 wireless on 2 different computers, one windows 7
the other windows 8, with no sucess. I keep getting a message saying " The system cannot find the specified file".
I even paid for a driver on a disk and got the same message.
HELP ME PLEASE
Sincerely
meyerret

Hi,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the installation goes as expected.
If the issue persists continue following the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Error Message "the system cannot find the specified file"

Hi,
I built my website with iWeb, but when I want to publish it on my own domain (not .mac) I've always this error message (the system cannot find the specified file) with many files. I've tryed many ftp host but I still have the same problem. I ask my host domain manager and everything is ok with them. Si I guess that the problem comes from iWeb.
Please help me.
Thanks

I get the error: Cannot Copy 08 the curse in on my house: Cannot find the specified file. Make sure you specify the correct path and file name.
The song "the curse in on..." is on the "into the woods" soundtrack. I deleted the entire soundtrack from my iTunes Library, shut down and tried again. Same error. I did a search of all three hd (2 external and c) nothing found. I searched for song name and "into the woods" I even searched for the artist "Nicholas Parson Company" nothing on any of the 3 HDs. I also went into explorer and manually searched for the song under soundtracks, misc, various and I could not find it. I consolidated my library and restarted. I tried again and same error message. Can a level 4 or 5 offer any help. I am at a loss...
The error won't let me copy one library to another HD.

"The system cannot find the specified"

When I try to install HP Photosmart Full Feature Software and Drivers - fulling.exe
I get an error "The system cannot find the specified"
What is the fix?

Hi,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the installation goes as expected.
If the issue persists continue following the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

C4599 printer cannot find file specified

Downloaded PS_AIO_04_C4500_USW_Full_Win_WW_130_140.exe and tried to install c4599 printer. Get error System cannot find specified file "BlockSysUserInstall.exe which located in the Temp directory. I have noted it keeps referring to a hardcoded "7zS2F4B". Have tried renaming file in Temp directory to "7zS2F4B" but still no install.
This question was solved.
View Solution.

Hi foberg,
Follow the steps below to update the software to the latest version.
Step one: Clear temp directory
1. Type %temp% in the run or search for programs and files field
2. Highlight all the files in this folder, and then press the delete key to delete. If you get a message that the file is in use you will need to skip this file(s).
3. Continue with Step 2 below
Step two: Downloaded and extracted to your system:
1. Download the full feature software and drivers
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-74912-1&cc=us&dlc=en&lc=en&...=
2. Once the download is finished double click on the file to extract the software.
3. When the installation window opens press the cancel button to stop the installation
4. Type %temp% in the run or search for programs and files field
5. Look for, and open the folder starting with 7z (Example: 7zS2356)
6. Right click on the folder, and select Copy
7. Close that window, and all your open windows, and then in the middle of the desktop right click your mouse, and select Paste. This will move the 7z folder to your desktop.
8. Open the 7z folder you just copied to your desktop
9. Open folder Util
10. Open folder CCC
11. Run the uninstall_L4
12. When the uninstall has completed restart the computer
13. Run Disk cleanup from Accessories\ System Tools folder under all programs
14. Download and install the latest version of Adobe flash player
http://www.adobe.com/support/flashplayer/downloads.html
15. Open the 7z folder, and then double click on the Setup.exe file which will be toward the bottom of the open window. Follow the on screen instructions to reinstall your printer.
Let me know what you find out?
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

System cannot find path specified.please advise

hi, i can run my previously saved programs in console mode but i cannot compile anything
as the system cannot find the path.i have douwnloaded the latest-jdk 6 update 6.
i have the file where my programs are and then i type c:\jdk1.6.0_06\bin\javac Calculator.java
but it cant find it...please help?

include c:\jdk1.6.0_06\bin\ in your path environment variable, and then call "javac" instead of trying to call directly it with its absolute path

Cannot find file specified!!!

To anyone that can help.
Server 2012 R2
Trying to run a .wsf file and the system tells me that it cannot find the file specified.
Opened command prompt as admin and running cscript.exe shoreware_backup.wsf
I am losing my mind
Jared

' Backup Script for ShoreWare Server
<job id="ShorewareBackup">
<script language="VBScript" src="common.vbs" />
<script language="VBScript">
writeToLog "********** Starting Shoreware Backup Process **********"
'----- load ini file, this should always be the first thing to do -----
loadINI
Dim backupDrive : backupDrive = BACKUP_DRIVE
Dim backupRootDir : backupRootDir = BACKUP_ROOT_DIR
Dim scriptsRootDir : scriptsRootDir = SCRIPTS_ROOT_DIR
Dim scriptsDVMRootDir : scriptsDVMRootDir = SCRIPTS_DVM_ROOT_DIR
Dim backupVMBRootDir : backupVMBRootDir = BACKUP_VMB_ROOT_DIR
Dim backupUCBRootDir : backupUCBRootDir = BACKUP_UCB_ROOT_DIR
Dim backupDVSRootDir : backupDVSRootDir = BACKUP_DVS_ROOT_DIR
Dim ShoretelRootDir : ShoretelRootDir = SERVER_DIR
Dim ShoretelDVMRootDir : ShoretelDVMRootDir = DVM_SERVER_DIR
writeToLog "Backup Directory: " & backupDrive & backupRootDir
If(serverType = SERVER_TYPE_HQ) Then
writeToLog "Scripts Directory: " & scriptsRootDir
ElseIf(serverType = SERVER_TYPE_DVM) Then
writeToLog "Scripts Directory: " & scriptsDVMRootDir
End If
Dim objShell, serverType, action, cmd_error
Set objShell = WScript.createObject("wscript.shell")
cmd_error = 0
Dim inIBMLF
inIBMLF = False
On Error Resume Next
Dim lfMode : lfMode = objShell.RegRead(REG_LF_MODE)
Select Case Err
Case 0:
  writeToLog "Registry key RunningOnLFMode exist"
  if(lfMode) Then
   writeToLog "RunningOnLFMode is not 0, we are in LF mode"
   inIBMLF = True
  End If
Case Else
  writeToLog "Registry key RunningOnLFMode does not exist"
End Select
On Error Goto 0
'----- Check for errors in the command line -----
If (WScript.Arguments.Length > 0) Then
serverType = LCase(WScript.Arguments.Item(0))
if(serverType = SERVER_TYPE_HQ or serverType = SERVER_TYPE_DVM or serverType = SERVER_TYPE_VMB or serverType = SERVER_TYPE_UCB or serverType = SERVER_TYPE_DVS) Then
  writeToLog "Server Type: " & serverType
Else
  writeToLog "ERROR! Invalid server type: " & serverType
  cmd_error = 1
End If
Else
writeToLog "ERROR! Syntax error, check the command line."
cmd_error = 1
End If
If (cmd_error = 1) Then
WScript.Echo "Usage Error: shoreware_backup.wsf [" &_
       SERVER_TYPE_HQ & "," &_
       SERVER_TYPE_DVM & "," &_
       SERVER_TYPE_VMB & "," &_
       SERVER_TYPE_UCB & "," &_
       SERVER_TYPE_DVS & "] [" &_
       OPTION_ALL & " | " &_
       OPTION_DB & " | " &_
       OPTION_VM & " | " &_
       OPTION_LOG & "]"
WScript.Quit -1
End If
'----- Verify this server is the server the user is expecting -----
If ((serverType = SERVER_TYPE_HQ) and isRemoteServer) Then
WScript.Echo TEXT_ERROR_NOT_HQ
WScript.Quit -1
ElseIf ((serverType = SERVER_TYPE_DVM) and Not isRemoteServer) Then
WScript.Echo TEXT_ERROR_NOT_DVM'
WScript.Quit -1
Else
End If
'----- Parse the command line -----
Dim index, doConfig, doVM, doCDR, doLogs
index = 0
doConfig = False
doVM = False
doCDR = False
doLogs = False
For Each action in WScript.Arguments
If (index = 0) Then
  'Do nothing, this is the server type
Else
  select case LCase(action)
   case OPTION_ALL
    doConfig = True
    doVM = True
    doCDR = True
    doLogs = True
   case OPTION_CONFIG
    doConfig = True
   case OPTION_VM
    doVM = True
   case OPTION_CDR
    doCDR = True
   case OPTION_LOG
    doLogs = True
   case OPTION_DB
    doConfig = True
    doCDR = True
   case ARG_SWITCH_VERBOSE
    VERBOSE_MODE = True
   case Else
    writeToLog "ERROR! Invalid option: " & action
    WScript.Echo "Warning: Unrecognized type " & action
  end select
End If
index = index + 1
Next
Dim dataRootDir : dataRootDir = objShell.RegRead(REG_SWDATA_DIR)
writeToLog "SW Data Directory: " & dataRootDir
'----- Stop services and perform backup -----
If(serverType = SERVER_TYPE_HQ) Then
writeToLog "---> cleaning current backup folder"
rotateBackupFolder backupDrive, backupRootDir
writeToLog "---> stopping hq services"
stopHQ scriptsRootDir
writeToLog "---> backing up hq data"
backUpHQ dataRootDir, backupDrive, backupRootDir, doConfig, doVM, doCDR, doLogs
ElseIf(serverType = SERVER_TYPE_DVM) Then
writeToLog "---> cleaning current backup folder"
rotateBackupFolder backupDrive, backupRootDir
writeToLog "---> stopping dvm services"
stopDVM scriptsDVMRootDir
writeToLog "---> backing up dvm data"
backUpDVM dataRootDir, backupDrive, backupRootDir, doConfig, doVM, doCDR, doLogs
ElseIf(serverType = SERVER_TYPE_VMB) Then
Dim vmbIp
writeToLog "---> cleaning current backup folder"
rotateBackupFolder backupDrive, backupVMBRootDir
For Each vmbIp In VMB_LIST
  writeToLog "---> stopping vmb (" & vmbIp & ") services"
  stopVMB vmbIp
  writeToLog "---> backing up vmb data"
  backupVMB backupDrive, backupVMBRootDir, vmbIp
Next
ElseIf(serverType = SERVER_TYPE_UCB) Then
Dim ucbIp
writeToLog "---> cleaning current backup folder"
rotateBackupFolder backupDrive, backupUCBRootDir
For Each ucbIp In UCB_LIST
  writeToLog "---> stopping ucb (" & ucbIp & ") services"
  stopUCB ucbIp
  writeToLog "---> backing up ucb data"
  backupUCB backupDrive, backupUCBRootDir, ucbIp
Next
ElseIf(serverType = SERVER_TYPE_DVS) Then
Dim dvsIp
writeToLog "---> cleaning current backup folder"
rotateBackupFolder backupDrive, backupDVSRootDir
For Each dvsIp In DVS_LIST
'  writeToLog "---> stopping dvs (" & dvsIp & ") services"
'  stopDVS dvsIp
  writeToLog "---> backing up dvs data"
  backupDVS backupDrive, backupDVSRootDir, dvsIp
Next
End If
'----- Save off current version of shoreware -----
setDataVersion backupDrive, backupRootDir, serverType
'----- Backup complete, so re-start services -----
If(serverType = SERVER_TYPE_HQ) Then
writeToLog "---> starting hq services"
startHQ scriptsRootDir
ElseIf(serverType = SERVER_TYPE_DVM) Then
writeToLog "---> starting dvm services"
startDVM scriptsDVMRootDir
ElseIf(serverType = SERVER_TYPE_VMB) Then
For Each vmbIp In VMB_LIST
  writeToLog "---> starting vmb (" & vmbIp & ") services"
  startVMB vmbIp
Next
ElseIf(serverType = SERVER_TYPE_UCB) Then
For Each ucbIp In UCB_LIST
  writeToLog "---> starting ucb (" & ucbIp & ") services"
  startUCB ucbIp
Next
'ElseIf(serverType = SERVER_TYPE_DVS) Then
' For Each dvsIp In DVS_LIST
'  writeToLog "---> starting dvs (" & dvsIp & ") services"
'  startDVS dvsIp
' Next
End If
writeToLog "********** Completed Shoreware Backup Process **********"
If(Not inIBMLF) Then
WScript.Echo TEXT_BACKUP_COMPLETE
End If
'----- Script Done -----
' SubProcedure to backup the data on the HQ server
' Backs up the following:
' 1. \Inetpub\mailroot
' 2. \Inetpub\ftproot
' 3. \Windows\my.ini
' 4. \Shoreline Data\MessageFiles
' 5. \Shoreline Data\Prompts
' 6. \Shoreline Data\Scripts
' 7. \Shoreline Data\SoftSwitch
' 8. \Shoreline Data\Templates
' 9. (optional) \Shoreline Data\Database
' 10. (optional) \Shoreline Data\Vms
' 11. (optional) \Shoreline Data\Call Records 2
' 12. (optional) \Shoreline Data\Logs
' Input
' rootDir - (String) path of root directory containing Shoreline Data
' backupDrive - (String) disk drive of backup destination
' backupDir - (String) path of backup destination
' doConfig - (Boolean) if to backup "\Database"
' doVM - (Boolean) if to backup "\Vms"
' doCDR - (Boolean) if to backup "\Call Records 2"
' doLogs - (Boolean) if to backup "\Logs"
sub backUpHQ (rootDir, backupDrive, backupDir, doConfig, doVM, doCDR, doLogs)
'WScript.Echo "Backing up HQ..."
'back-up mailroot
folderCopy WINDOWS_DRIVE & MAILROOT_ROOT_DIR, backupDrive, backupDir & MAILROOT_ROOT_DIR, True
ftpRootDirAsInRegistry = objShell.RegRead(REG_FTPROOT_DIR)
writeToLog "ftp root Directory: " & ftpRootDirAsInRegistry
'lngPos = Instr(ftpRootDirAsInRegistry, ",")
'ftpRootDir = Left(ftpRootDirAsInRegistry, lngPos-1)
ftpRootDir = ftpRootDirAsInRegistry
lngPos1 = Instr(ftpRootDir, ":")
ftpdirlength =Len(ftpRootDir)
ftpRootDirWithoutDriveName = Right(ftpRootDir, ftpdirlength-lngPos1)
backupDirWithSlash = backupDir & "\"
'back-up ftproot
'folderCopy WINDOWS_DRIVE & FTPROOT_ROOT_DIR, backupDrive, backupDir & FTPROOT_ROOT_DIR, True
'back-up ftproot directory
folderCopy ftpRootDir, backupDrive, backupDirWithSlash & ftpRootDirWithoutDriveName, True
writeToLog "ftproot directory backup done: " & backupDirWithSlash & ftpRootDirWithoutDriveName
'back-up mysql configuration
fileCopy SHOREWARE_DRIVE & ShoretelRootDir & "\MySQLCDR\MySQL Server\" & MYSQL_CONFIG_FILE, backupDrive, backupDir & ShoretelRootDir & "\MySQLCDR\MySQL Server\", True
fileCopy SHOREWARE_DRIVE & ShoretelRootDir & "\MySQLConfig\MySQL Server\" & MYSQL_CONFIG_FILE, backupDrive, backupDir & ShoretelRootDir & "\MySQLConfig\MySQL Server\", True
'back-up HQ data
Dim objFSO : Set objFSO = Wscript.CreateObject("Scripting.FileSystemObject")
If objFSO.FolderExists(rootDir) Then
  Dim objFolder, objSubfolders, doCopy
  Set objFolder = objFSO.GetFolder(rootDir)
  Set objSubfolders = objFolder.SubFolders
  For Each objFolder in objSubfolders
   doCopy = False
   select case objFolder.Name
    case FOLDER_NAME_CONFIG
     if(doConfig) Then
      doCopy = True
     End If
    case FOLDER_NAME_VM
     if(doVM) Then
      doCopy = True
     End If
    case FOLDER_NAME_CDR
     if(doCDR) Then
      doCopy = True
     End If
    case FOLDER_NAME_LOGS
     if(doLogs) Then
      doCopy = True
     End If
    case Else
     doCopy = True
   end select
   if(doCopy) Then
    folderCopy objFolder.Path, backupDrive, backupDir & "\" & BACKUP_SW_DIR & objFolder.Name, True
   End If
  Next
End If
end sub
' SubProcedure to backup the data on the DVM server
' Backs up the following:
' 1. \Inetpub\mailroot
' 2. \Inetpub\ftproot
' 3. \Windows\my.ini
' 4. \Shoreline Data\MessageFiles
' 5. \Shoreline Data\Prompts
' 6. \Shoreline Data\Scripts
' 7. \Shoreline Data\SoftSwitch
' 8. \Shoreline Data\Templates
' 9. (optional) \Shoreline Data\Database
' 10. (optional) \Shoreline Data\Vms
' 11. (optional) \Shoreline Data\Call Records 2
' 12. (optional) \Shoreline Data\Logs
' Input
' rootDir - (String) path of root directory containing Shoreline Data
' backupDrive - (String) disk drive of backup destination
' backupDir - (String) path of backup destination
' doConfig - (Boolean) if to backup "\Database"
' doVM - (Boolean) if to backup "\Vms"
' doCDR - (Boolean) if to backup "\Call Records 2"
' doLogs - (Boolean) if to backup "\Logs"
sub backUpDVM (rootDir, backupDrive, backupDir, doConfig, doVM, doCDR, doLogs)
'WScript.Echo "Backing up DVM..."
'back-up mailroot
folderCopy WINDOWS_DRIVE & MAILROOT_ROOT_DIR, backupDrive, backupDir & MAILROOT_ROOT_DIR, True
ftpRootDirAsInRegistry = objShell.RegRead(REG_FTPROOT_DIR)
writeToLog "ftp root Directory: " & ftpRootDirAsInRegistry
ftpRootDir = ftpRootDirAsInRegistry
lngPos1 = Instr(ftpRootDir, ":")
ftpdirlength =Len(ftpRootDir)
ftpRootDirWithoutDriveName = Right(ftpRootDir, ftpdirlength-lngPos1)
backupDirWithSlash = backupDir & "\"
'back-up ftproot directory
folderCopy ftpRootDir, backupDrive, backupDirWithSlash & ftpRootDirWithoutDriveName, True
writeToLog "ftproot directory backup done: " & backupDirWithSlash & ftpRootDirWithoutDriveName
'back-up mysql configuration
fileCopy SHOREWARE_DRIVE & ShoretelDVMRootDir & "\MySQLConfig\MySQL Server\" & MYSQL_CONFIG_FILE, backupDrive, backupDir & ShoretelDVMRootDir & "\MySQLConfig\MySQL Server\", True
'back-up DVM data
Dim objFSO : Set objFSO = Wscript.CreateObject("Scripting.FileSystemObject")
If objFSO.FolderExists(rootDir) Then
  Dim objFolder, objSubfolders, doCopy
  Set objFolder = objFSO.GetFolder(rootDir)
  Set objSubfolders = objFolder.SubFolders
  For Each objFolder in objSubfolders
   doCopy = False
   select case objFolder.Name
    case FOLDER_NAME_CONFIG
     if(doConfig) Then
      doCopy = True
     End If
    case FOLDER_NAME_VM
     if(doVM) Then
      doCopy = True
     End If
    case FOLDER_NAME_CDR
     if(doCDR) Then
      doCopy = True
     End If
    case FOLDER_NAME_LOGS
     if(doLogs) Then
      doCopy = True
     End If
    case Else
     doCopy = True
   end select
   if(doCopy) Then
    folderCopy objFolder.Path, backupDrive, backupDir & "\" & BACKUP_SW_DIR & objFolder.Name, True
   End If
  Next
End If
end sub
' SubProcedure to backup the data on the VMB switch
' Backs up the following:
' 1. \etc\ShoreTel.cfg
' 2. \etc\cfg.dat
' 3. \cf
' Input
' backupDrive - (String) disk drive of backup destination
' backupDir - (String) path of backup destination
' vmbIP - (String) ip address of vmb switch
sub backupVMB(backupDrive, backupDir, vmbIP)
Dim tarCF, copyCF, copyShorCFG, copyCfgDat, cleanUp
Dim backUpPath : backUpPath = backupDrive & backupDir & "\" & BACKUP_VMB_DIR & "_" & vmbIP
'create folder if doesn't exist
Dim objFSO : Set objFSO = Wscript.CreateObject("Scripting.FileSystemObject")
If Not objFSO.FolderExists(backUpPath) Then
  buildPath backUpPath
End If
tarCF = """" & PLINK_CMD & """" & " -pw " & VMB_PASSWD & " " &_
    VMB_USER & "@" & vmbIP &_
    " ""tar -czf " & VMB_CF_TAR_FOLDER & VMB_CF_TAR_FILE & " " & VMB_CF_SHORELINEDATA_DIR & """"
copyCF = """" & PSCP_CMD & """" & " -pw " & VMB_PASSWD & " " &_
    VMB_USER & "@" & vmbIP & ":" & VMB_CF_TAR_FOLDER & VMB_CF_TAR_FILE &_
    " """ & backUpPath & """"
copyShorCFG = """" & PSCP_CMD & """" & " -pw " & VMB_PASSWD & " " &_
    VMB_USER & "@" & vmbIP & ":" & VMB_SHORE_CFG_FOLDER & VMB_SHORE_CFG_FILE &_
    " """ & backUpPath & """"
copyCfgDat = """" & PSCP_CMD & """" & " -pw " & VMB_PASSWD & " " &_
    VMB_USER & "@" & vmbIP & ":" & VMB_CGF_DAT_FOLDER & VMB_CGF_DAT_FILE &_
    " """ & backUpPath & """"
cleanUp = """" & PLINK_CMD & """" & " -pw " & VMB_PASSWD & " " &_
    VMB_USER & "@" & vmbIP &_
    " ""rm -f " & VMB_CF_TAR_FOLDER & VMB_CF_TAR_FILE & """"
runCmd tarCF
runCmd copyCF
runCmd copyShorCFG
runCmd copyCfgDat
runCmd cleanUp
end sub
' SubProcedure to backup the data on the UCB switch
' Backs up the following:
' 1. \etc\ShoreTel.cfg
' 2. \etc\cfg.dat
' 3. \cf
' Input
' backupDrive - (String) disk drive of backup destination
' backupDir - (String) path of backup destination
' ucbIP - (String) ip address of ucb switch
sub backupUCB(backupDrive, backupDir, ucbIP)
Dim tarCF, copyCF, copyShorCFG, copyCfgDat, cleanUp
Dim backUpPath : backUpPath = backupDrive & backupDir & "\" & BACKUP_UCB_DIR & "_" & ucbIP
'create folder if doesn't exist
Dim objFSO : Set objFSO = Wscript.CreateObject("Scripting.FileSystemObject")
If Not objFSO.FolderExists(backUpPath) Then
  buildPath backUpPath
End If
tarCF = """" & PLINK_CMD & """" & " -pw " & UCB_PASSWD & " " &_
    UCB_USER & "@" & ucbIP &_
    " ""tar -czf " & UCB_CF_TAR_FOLDER & UCB_CF_TAR_FILE & " " & UCB_CF_SHORELINEDATA_DIR & """"
copyCF = """" & PSCP_CMD & """" & " -pw " & UCB_PASSWD & " " &_
    UCB_USER & "@" & ucbIP & ":" & UCB_CF_TAR_FOLDER & UCB_CF_TAR_FILE &_
    " """ & backUpPath & """"
copyShorCFG = """" & PSCP_CMD & """" & " -pw " & UCB_PASSWD & " " &_
    UCB_USER & "@" & ucbIP & ":" & UCB_SHORE_CFG_FOLDER & UCB_SHORE_CFG_FILE &_
    " """ & backUpPath & """"
copyCfgDat = """" & PSCP_CMD & """" & " -pw " & UCB_PASSWD & " " &_
    UCB_USER & "@" & ucbIP & ":" & UCB_CGF_DAT_FOLDER & UCB_CGF_DAT_FILE &_
    " """ & backUpPath & """"
cleanUp = """" & PLINK_CMD & """" & " -pw " & UCB_PASSWD & " " &_
    UCB_USER & "@" & ucbIP &_
    " ""rm -f " & UCB_CF_TAR_FOLDER & UCB_CF_TAR_FILE & """"
runCmd tarCF
runCmd copyCF
runCmd copyShorCFG
runCmd copyCfgDat
runCmd cleanUp
end sub
' SubProcedure to backup the data on the DVS switch
' Backs up the following:
' 1. \etc\ShoreTel.cfg
' 2. \etc\cfg.dat
' 3. \cf
' Input
' backupDrive - (String) disk drive of backup destination
' backupDir - (String) path of backup destination
' dvsIP - (String) ip address of dvs switch
sub backupDVS(backupDrive, backupDir, dvsIP)
' Dim tarCF, copyCF, copyShorCFG, copyCfgDat, cleanUp
Dim backUpPath : backUpPath = backupDrive & backupDir & "\" & BACKUP_DVS_DIR & "_" & dvsIP
Dim backupcascmd
'create folder if doesn't exist
Dim objFSO : Set objFSO = Wscript.CreateObject("Scripting.FileSystemObject")
If Not objFSO.FolderExists(backUpPath) Then
  buildPath backUpPath
End If
' tarCF = """" & PLINK_CMD & """" & " -pw " & DVS_PASSWD & " " &_
'    DVS_USER & "@" & dvsIP &_
'    " ""tar -czf " & DVS_CF_TAR_FOLDER & DVS_CF_TAR_FILE & " " & DVS_CF_SHORELINEDATA_DIR & """"
' copyCF = """" & PSCP_CMD & """" & " -pw " & DVS_PASSWD & " " &_
'    DVS_USER & "@" & dvsIP & ":" & DVS_CF_TAR_FOLDER & DVS_CF_TAR_FILE &_
'    " """ & backUpPath & """"
' copyShorCFG = """" & PSCP_CMD & """" & " -pw " & DVS_PASSWD & " " &_
'    DVS_USER & "@" & dvsIP & ":" & DVS_SHORE_CFG_FOLDER & DVS_SHORE_CFG_FILE &_
'    " """ & backUpPath & """"
' copyCfgDat = """" & PSCP_CMD & """" & " -pw " & DVS_PASSWD & " " &_
'    DVS_USER & "@" & dvsIP & ":" & DVS_CGF_DAT_FOLDER & DVS_CGF_DAT_FILE &_
'    " """ & backUpPath & """"
' cleanUp = """" & PLINK_CMD & """" & " -pw " & DVS_PASSWD & " " &_
'    DVS_USER & "@" & dvsIP &_
'    " ""rm -f " & DVS_CF_TAR_FOLDER & DVS_CF_TAR_FILE & """"
' backupcascmd = "rdiff-backup.exe -v7 --force --no-eas --remote-schema "plink -pw ShoreTel %%s rdiff-backup --server"
[email protected]::/rdiff/back1 c:\mywindowsdata > c:\out.txt 2>&1"
backupcascmd = "rdiff-backup.exe -v7 --force --no-eas --remote-schema " &_
    """" & PLINK_CMD & " -pw " & DVS_PASSWD & " %%s rdiff-backup --server" & """" &_
    DVS_USER & "@" & dvsIP & "::" & DVS_CF_DIR & " " & """" & backUpPath & """"
runCmd backupcascmd
' runCmd tarCF
' runCmd copyCF
' runCmd copyShorCFG
' runCmd copyCfgDat
' runCmd cleanUp
end sub
' SubProcedure to rotate the backup folder. It will archive the
' current backup folder based on the BACKUP_ARCHIVE_SIZE value.
' Input
' backupDrive - (String) disk drive of backup destination
' backupDir - (String) path of backup destination
sub rotateBackupFolder (backupDrive, backupDir)
Dim objFSO, objFolder, newBackupFolderName
Dim backupFolder : backupFolder = backupDrive & backupDir
Set objFSO = Wscript.CreateObject("Scripting.FileSystemObject")
For i=BACKUP_ARCHIVE_SIZE to 0 Step -1
  If(i = 0) Then
   newBackupFolderName = backupFolder
  Else
   newBackupFolderName = backupFolder & i
  End If
  If objFSO.FolderExists(newBackupFolderName) Then
   Set objFolder = objFSO.GetFolder(newBackupFolderName)
   If(i = BACKUP_ARCHIVE_SIZE) Then
    objFolder.Delete True
   Else
    newBackupFolderName = backupFolder & i+1
    objFolder.Move newBackupFolderName
   End If
  End If
Next
end sub
' SubProcedure to perform a folder copy. Utilizes the Windows xcopy
' command. The xcopy switches used:
'    /E Copies directories and subdirectories, including empty ones.
'    /I If destination does not exist and copying more than one file,
'       assumes that destination must be a directory.
'    /K Copies attributes. Normal Xcopy will reset read-only
'       attributes.
'    /C Continues copying even if errors occur.
'    /Y Suppresses prompting to confirm you want to overwrite an
'       existing destination file.
' Input
' src - (String) path of source folder
' dstDrive - (String) disk drive of destination
' dstFolder - (String) path of destination
' force - (Boolean) if false, will prompt before overwriting
'          existing files
sub folderCopy (src, dstDrive, dstFolder, force)
Dim objFSO
Dim dst : dst = dstDrive & dstFolder
Set objFSO = Wscript.CreateObject("Scripting.FileSystemObject")
If objFSO.FolderExists(src) Then
  Dim objFolder, objDrive
  'Check for available disk space first
  Set objFolder = objFSO.GetFolder(src)
  Set objDrive = objFSO.GetDrive(dstDrive)
  If isThereAvailableSpace(objDrive, objFolder.Size) Then
   Dim command : command = "xcopy """ & src & """ """ & dst & """ /E /I /K /C"
   If (force) Then
    command = command & " /Y"
   End If
   runCmd command
  Else
   writeToLog "ERROR! Insufficient Disk Space to copy folder: " & src
   WScript.Echo "Error! Insufficient Disk Space!"
  End If
Else
  writeToLog "ERROR! Folder not found: " & src
  WScript.Echo "ERROR: Folder doesn't exist (" & src & ")"
End If
end sub
' SubProcedure to perform a file copy. Utilizes the Windows xcopy
' command. The xcopy switches used:
'    /I If destination does not exist and copying more than one file,
'       assumes that destination must be a directory.
'    /K Copies attributes.
'    /C Continues copying even if errors occur.
'    /Y Suppresses prompting to confirm you want to overwrite an
'       existing destination file.
' Input
' src - (String) path of source file
' dstDrive - (String) disk drive of destination
' dstFile - (String) path of destination
' force - (Boolean) if false, will prompt before overwriting
'          existing files
sub fileCopy (src, dstDrive, dstFile, force)
Dim objFSO
Dim dst : dst = dstDrive & dstFile
Set objFSO = Wscript.CreateObject("Scripting.FileSystemObject")
If objFSO.FileExists(src) Then
  Dim objFile, objDrive
  'Check for available disk space first
  Set objFile = objFSO.GetFile(src)
  Set objDrive = objFSO.GetDrive(dstDrive)
  If isThereAvailableSpace(objDrive, objFile.Size) Then
   Dim command : command = "xcopy """ & src & """ """ & dst & """ /I /K /C"
   If (force) Then
    command = command & " /Y"
   End If
   runCmd command
  Else
   writeToLog "ERROR! Insufficient Disk Space to copy file: " & src
   WScript.Echo "Error! Insufficient Disk Space!"
  End If
Else
  writeToLog "ERROR! File not found: " & src
  WScript.Echo "ERROR: File doesn't exist (" & src & ")"
End If
end sub
' Function to check if there's sufficient disk space for the
' requested size
' Input
' objDrive - (Object) the disk drive to check for space
' spaceNeeded - (Integer) number of bytes being requested
' Return
' (Boolean) if the requested space is available
function isThereAvailableSpace(objDrive, spaceNeeded)
If (objDrive.AvailableSpace > spaceNeeded) Then
  isThereAvailableSpace = True
Else
  isThereAvailableSpace = False
End If
end function
' SubProcedure to write current version of Shoreware to a file
' Input
' backupDrive - (String) disk drive of backup destination
' backupDir - (String) path of backup destination
sub setDataVersion (backupDrive, backupDir, serverType)
Dim version
Dim fileName : fileName = backupDrive & backupDir & "\" & SW_VERSION_FILE
If(serverType = SERVER_TYPE_HQ) Then
  version = objShell.RegRead(REG_HQ_VERSION)
ElseIf(serverType = SERVER_TYPE_DVM) Then
  version = objShell.RegRead(REG_DVM_VERSION)
ElseIf(serverType = SERVER_TYPE_VMB) Then
  'For now, VMB doesn't do any version checking
  Exit sub
ElseIf(serverType = SERVER_TYPE_UCB) Then
  'For now, UCB doesn't do any version checking
  Exit sub
ElseIf(serverType = SERVER_TYPE_DVS) Then
  'For now, DVS doesn't do any version checking
  Exit sub
End If
writeToLog "SW Data Version: " & version
writeToFile fileName, 2, version
end sub
</script>
</job>
Jared

Satellite C850-13D - Error: system cannot find path specified

I BOUGHT TOSHIBA SATELLITE LAPTOP C850-13D , I HAD TO BRING IT BACK FOR REPLACEMENT, BECAUSE I COULDN`T INSTALL ANYTHING, I KEPT GETTING ERRORS, LIKE THE ONE THAT I MENTIONED AS A `SUBJECT`OR NSIS ERROR.
I KEEP GETTING THE SAME ERRORS ON MY NEW LAPTOP. I HAVE NO IDEA HOW TO FIX IT, I RESEARCH ONLINE AND IT SEEMS THAT ANYTHING I DO, DOESN`T WORK.

Hello, the software you are trying to install is proboly going to the C drive which hasn't got enough room. When the software ask for the location that you would it installing to try installing it to the D drive.

Can't open links from Outlook 2007 - "cannot find file specified"

When I click on an attachment (link) in Outlook 2007 the following message appears -
General Failure. The URL was: "http://www.clarrissegill.com/video/****.php".
I can right click on the attachment and copy hyperlink to the browser but having to do this every time is a pain in the butt. This problem has only occurred over the last couple of months.
Any suggestions please?

Try this ..
1.Close both the Firefox and Outlook (2010) programs. Make sure the processes have exited.
2.In Control Panel, go to "Default Programs".
3.Go to "Set default programs" and set Firefox as default.
4.Go back and then to "Set program access and computer defaults" and set Firefox and Outlook as your default browser and email program respectively.
5.Restart Firefox and Outlook at the problem should hopefully be fixed

Photosmart C4780 install fails at "system cannot find specified file"

My problem started simply with the printer, an HP Photosmart C4780 which has always had a wireless connection and would not print. At first, the network connection checked out fine from the printer control panel. I ran a Microsoft printer troubleshooter, which found a block in the print queue, and cleared it. The first test page would not print, but the "inner test page" did print. I didn't understand whatever that meant, so I looked for help from the HP site.
I ran the HP Print and Scan Doctor, and it suggested I reinstall the driver. I downloaded and saved the current one from HP (PS_AIO_06_C4700_USW_Full_Win_enu_140_175.exe) and then uninstalled the existing driver. When I attempted to install the new one, a window popped up saying, "The system cannot find the specified file," with only one box to click which said simply "OK". The installation went through to "review installation options", after which came “checking updates, downloading updates, installing updates” and then it was while “checking system” that the “cannot find the file” window popped up, and when I clicked “OK”, the installation window as well as the error message box, just disappeared. What I assume was the file path was in the frame of the window, but the whole thing didn't fit so it didn't show the end. What I could read was “C:\Users\ … \Local\Temp\7zS588E\Setup\.\Setup\hpzpnp40 …
I found one topic on the same problem for the same model printer in the forum, which offered this fix:
You will need to first complete a level 3 uninstall of the software. I have included the steps below for this.
1. Press the Windows key, and the letter R
2. Type %temp%, and click OK
3. Open the 7z folder (most recent one if there are multiples)
4. Open the util folder
5. Open the ccc folder
6. Double click on the Uninstall_L3
Once the Uninstall_L3 has completed, please delete all items listed in the temp folder. Note, you will not be able to to delete all items, please skip the ones that you cannot. Next please empty the trash, and perform a clean boot. I have included the document 'How to perform a clean boot in Windows'. If your computer does not request it, please restart your computer.
Once your computer is back up, you will need to reinstall the printers software. You can either do this by using the Installation CD, or downloading the software.
I did what was suggested, until it got to the point where it said it did not recommend removing any further items if I intended on using the HP Officejet printer (yes I have a second HP printer attached to the network) anytime in the future. Not really understanding how this all works, I decided to stop what I was doing, so unfortunately it did not solve my problem.
Do I need to uninstall both HP printers before I can reinstall one? And if I do that, is there any reason I would not be able to reinstall both printers? Sounds like I'm asking for trouble. Bottom line... I still cannot install the driver.
I have tried to install both the full and basic versions of the driver and always get the same result.
I have an HP Pavilion dv6-3100t notebook, running Windows 7 Home Premium, version 6.1.7601 service pack 1, 64 bit. I haven't installed any new hardware or software. This printer has always had a wireless connection. The router I use is a Netgear 54 Mbps WGR614 v6 (supplied by my cable company), and the network includes not only my notebook and the Photosmart printer, but also an ASUS desktop, another HP printer, an Officejet 6300 series (used only for printing graphics and photos with a wired connection to the router), and a Vizio smart-TV. I use Norton 360 Premier Edition and disabled the anti-virus auto-protect when I downloaded and attempted to install the driver.
Please help! And thanks in advance for your time and attention.
This question was solved.
View Solution.

Hi wakey-wakey,
I would recommend accessing your Temp folders, rename a Temp folder to 7zS588E and run the installation from that folder.
Please keep me posted.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

"The system cannot find the path specified" error when installing a network printer running Win 7

Some of the end users are having issues when trying to install network printers. We have created a portal where they can locate the printer they want to connect to, click connect, and the printer will download with the correct drivers on their PC's. The
entire company is running Win 7 for their operating system. One end user in particular has had issues installing multiple printers from the portal, when I go to test installing these same printers on my PC, they all install successfully. trying to figure out
why some end users hav issues with installation and others do not. They will get the error, The system cannot find the specified path. Any help would be great

Hi JeffWilko,
What is your current situation?
To receive better analyzation, please provide more details?
1. Could you explain a bit about the sentence ‘installing multiple printers from the portal’ ?
2. Check the event viewer and share us the related error log.
Please take the following steps for troubleshooting:
1. Ping the printers
2. Check if there are network firewall to block the access
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

PE9 on Win 7: system cannot find the path specified

Hi,
I have PE9 running on a windows 7 PC and am trying to add a drive on my file server to the watched folders list. The server PC is also running Win 7. when I select the drive mapped to the PC Server I get the error "system cannot find path specified", but my PC can access the drive just fine. What is PE's problem. Picassa, Lightroom (trial), don;t have any problem accessing the drive. PE didn;t have oroblems with my old server whcih was running XP64. The new is Win 7 and utilizes Homegroup. Any ideas?
Thanks.

Hi JeffWilko,
What is your current situation?
To receive better analyzation, please provide more details?
1. Could you explain a bit about the sentence ‘installing multiple printers from the portal’ ?
2. Check the event viewer and share us the related error log.
Please take the following steps for troubleshooting:
1. Ping the printers
2. Check if there are network firewall to block the access
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Cannot Install this Hardware - The system cannot find the file specified.

I got an 8G ipod touch last week. When I plug it into USB port on my PC, a Found New Hardware Wizard box pops up with "Cannot Install this Hardware", "There was a problem installing this hardware: Apple Mobile Device USB Driver", "An error occurred during the installation of the device", "The system cannot find the file specified.", "Click Finish to close the wizard.". If I go ahead and click finish, the device disappears and a couple of seconds later tries to install again and the box pops up again. However, if I leave the box alone, the ipod does actually appear in itunes and I can sync music to it, so all is not lost Any ideas though how to stop this error box popping up? The USBAAPL.SYS driver exists - I don't know what file it cannot find. Thanks.

Hi and welcome to Discussions,
if you have a Leopard OSX DVD you can use it to install the BootCamp 2.0 drivers and later use the BC Update 2.1 for XP to further update the drivers.
If not (still running OSX Tiger) there are two possibilities:
use this direct download link for the latest ATI/AMD Mobility Driver package http://ati.amd.com/online/mobilecatalyst/
or use the ModTool found here http://www.driverheaven.net/modtool.php in conjunction with the ATI/AMD Desktop Driver package.
You should also consider getting and installing the latest (June 2008) DirectX 9 package from Microsoft.
Hope it helps with your gaming problems.
Stefan

RSAT won't install on Windows 8.1 Pro - "The system cannot find the file specified."

Please help. RSAT won't install on Windows 8.1 Pro. Every time I try, I get the same error - "The system cannot find the file specified.". I really don't want to have to refresh the PC to get it working! I've installed the update successfully on
a fresh win 8.1 enterprise install on a Hyper-V VM.
I am in uk, so have installed the en-US language pack first. I did have a windows component store corruption but I've managed to fix that.
event log says:
Windows update "Update for Windows (KB2693643)" could not be installed because of error 2147942402 "The system cannot find the file specified." (Command line: ""C:\Windows\system32\wusa.exe"
"C:\RSAT Windows8.1-KB2693643-x64.msu" ")
CBS log (C:\Windows\Logs\CBS\CBS.log): http://1drv.ms/19CAv14

As Roger Lu reported, the log indicates that there is corruption in the update files that you downloaded. The log actually reports “file not found”, so you may also want to check permissions on the extracted files in C:\Windows\SoftwareDistribution\Download\76ecaa86ec6712300c2d71cbcdad378c\.
You can also re-try downloading the files to see if your original download was just corrupt.
Bruce Wooding Windows Outreach Team- IT Pro Windows for IT Pros on TechNet
It was a permissions issue! Thanks so much Bruce!
I checked the permissions for the folder mentioned above and TrustedInstaller only had List Folder Contents and Special Permissions. So I granted granted Read & Execute to TrustedInstaller and tried installing again...
1) double clicked the installer.
2) once it said Initialisation was complete, I checked the permissions again and it had re-set them to as before, so I granted Read & Execute to TrustedInstaller again
3) Installation was successful.
Not really sure why this happened as it doesn't make sense but it's working now :-)

System cannot find file specified during install officejet 6500

Similar Messages

Maybe you are looking for