System 'CE3' is not available. Make sure it is running properly.

hi,
im in CE 7.1 EHP 1. when im trayin to assig a Role to a new task in my process Model i get the error http 502. so i went to Process Instance Tab where i got the error System 'CE3' is not available. Make sure it is running properly.
whatever in windows-->preferences SAP AS Java i have the intance and in Server tab i can see is with status STARTED.
any Idea?
Thanks.

Hi Rodrigo,
The HTTP error code 502 is 'Bad gateway'. I also experienced this once or twice when I configured a certain proxy (or proxy script) that wasn't able to resolve that host. Try bypassing the proxy or using a special proxy for your host CE3 in the Proxy Settings of your NWDS.
Cheers,
Martin

Similar Messages

System 'CE3' is not available

hi,
im in CE 7.1 EHP 1. when im trayin to assig a Role to a new task in my process Model i get the error http 502. so i went to Process Instance Tab where i got the error System 'CE3' is not available. Make sure it is running properly.
whatever in windows-->preferences SAP AS Java i have the intance and in Server tab i can see is with status STARTED.
any Idea?

HI,
in nwds
windows>Preferences>Web Services>Enterprise Service Browser>assign the values like
ESR System CE3 and enter the corresponding values....
Regards
Manohar

Error: [NQSError:13037] cannot connect to BI security service,Please make sure this is running properly (with SSL or not) in EM

Hi,
Im unable to open the RPD online getting following error.
Note: Im not done any changes. Its works good till yesterday EOD.
Error:
[NQSError:13037] cannot connect to BI security service,Please make sure this is running properly (with SSL or not) in EM.
[NQSError:37001] could not connect to the oracle BI server instance..
Kindly help me to fix this issue.

Hi,
Could you access the answer side.
Could you see the reports.
Do one thing, take a back up of NQS config file from <Oracle Location>\instance\instance1\config\obiserver folder\nqsconfig.ini file.
Copy nqs config file if you have already have a back up.
Restart the services and try once.
http://mkashu.blogspot.com
Regards,
VG

Critical BitLocker Drive Encryption system files are not available

Hi all,
We are running into some issues when attempting to configure BitLocker Drive Encryption through the BitLocker UI on Windows Server 2008SP2.
On running the BitLocker configuration screen we are presented with a message stating that
‘Your system volume is not configured correctly to allow you to use BitLocker Drive Encryption.
Critical BitLocker Drive Encryption system files are not available’
We believe this issue may have been caused during a recent hardware migration using the DoubleTake Move software as we encountered a similar issue with the Windows Backup utility not seeing any available HDDs.
Has anyone else encountered a similar issue and aware of any potential fix?

I think it should be supported on Windows Server 2008 as it is supported on Windows Vista.
Can you check whether BdeHdCfg.exe is present in System32 folder. If not can you copy the BdeHdCfg.exe installer from higher version of OS and copy it to the system32 folder on Windows Server 2008 and then run the command with the administrative rights.
NOTE : Make sure to change the directory to %SystemDrive%\Windows\System32
Before running the command.
Regards, "Gaurav Ranjan" =========== NOTE: Mark as Answer and Vote as Helpful if it helps =======

System Landscape directory not available error,

I am still a beginner, and I am having some slight trouble understanding, what tools would be needed, and how to install. I am using the forums.
We have the MII Discovery Server up and running.
NWDS Server installation is done.
We have the MII track ready to be used for Development(SLD URL is available) , Userid and password available
I am working on installing the NWDS 7.3 Developer Workspace.
Would I also need to do NWDS Server install on my laptop?
Would these steps be sufficient?
1. Download and install JDK 1.6
2. Copy the file nwds-extsoa-7.3-SP00-PAT0000-win32.zip from:
<your download location>\51039309\DATA_UNITS\JAVA_IDE\distros\com.sap.netweaver.developerstudio.distribution.complete.extsoa\8.30.0.101020102100
to a convenient folder.
3. Extract the content and you will have a folder with name eclipse.
4. Launch the Netweaver Developer Studio from folder eclipse, you may want to create a shortcut on the Desktop.
5. If you haven't maintained JAVA_HOME property or if it's pointing to some other java version, eclipse will complain about it. In the dialog window locate the JDK 1.6 installation. Path to JDK 1.6 should be something like
C:\Program Files\Java\jdk1.6.0_25\bin
6. Restart the NWDS after this and select a suitable workspace.
7. Set the run time engine in NWDS, by going through the menu path:
Window->Preferences->SAP AS JAVA
Question:
1. I am unable to Set the run time engine in NWDS, please could you give me details steps with what I would need to enter for Instance Hostname and Instance Number...etc
2. As part of Development installation do I have to Modifying the Logon Page? Do I have to go thru the Server installation in order to start developing on eclipse environment?
I do not have the war file. How do i Copy the war file tcsecumelogonui.war from
<Installation drive>:\usr\sap\<SID>\J00\j2ee\cluster\apps\sap.com\com.sap.security.core.logon\servlet_jsp\logon_ui_resources\tcsecumelogonui.war
3. System Landscape directory not available error,
In the Component Browser when I right click and select New u2013 Development Configuration u2013 Import From System Landscape Directory (SLD) u2013 Next (Enter UserID and Password)
Thank you

Hello,
For the SLD error, please, configure SLD following as per this docuemtnation:
http://help.sap.com/saphelp_nw04/helpdata/EN/bb/c2b6421a75da11e10000000a155106/frameset.htm
Regarding the settings to enter NWDS to connect to AS Java, you have to enter the java instance data so that NWDS can connect to it in order to make deployments, etc....
Please, see also the following documentation that explains stp by step how to work with NWDS.
http://help.sap.com/saphelp_nw04/helpdata/en/fe/a3996fa314f94f8a0c3475b08636d0/frameset.htm
I hope this helps you.
Regards,
Blanca

RSAR2318 : IDoc type for source system T90CLNT090 is not available

Hi all,
I am working on BI + ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Error RSAR238 : IDoc type for source system T90CLNT090 is not available
I have already checked trx & dtps, but could not find resolution.
Kindly help me with this error.
Thanks and regards,
MS

M Sharma wrote:
But how exactly can I create when T90CLNT is not active? Help please.
Yes, you would need to check with BASIS team how they have created an alternate source system (for debugging) & prepare a RFC b/n these systems. Can you just check the settings in the source system and BI source system...and check the source system for the same BI system. Right click > Check and then do a restore or take the help of basis to fix it. What I think is a possible solution is : RSA1 > Source system > Search System > Right Click > Activate

RSAR238 : IDoc type for source system T90CLNT090 is not available

Hi all,
I am working on ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Kindly help me with this error.
Thanks and regards,
Dhanapal

Hi,
Check the same in SDN..
Object ZDUMMY could not be activatedMessage no. R7I028
Re: DSO Activation problem
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/test-cases-for-module-human-capital-management-1425016
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/idoc-type-for-source-system-t90clnt090-is-not-available-message-no-rsar238-1431565
Thanks
Reddy

The CMS system database is not available (FWM 02088)

Hi all,
After installation of BOE 3.1 the system fires back the error message on attempt to logon to CMS:
Account Information Not Recognized: The CMS system database is not available. This error cannot be rectified by the end user. Report this error to your system administrator or database administrator. (FWM 02088)
Any inputs? I've tried with new SIA as well as fresh installation but the issue persists.
Regards.

were you able to see any DB error messages in event log ?
can you connect to your DB from the server itself ? (could be FW issue)
What do you see under the CCM ? Do the SIA is in green state ?
For me it is probably one of 2 things : FW issue (but install will have failed) or DB issue
Sam.
Edited by: sjolly on Sep 17, 2009 9:46 AM

TS3048 i have replaced the batteries and checked to make sure they are installed properly but the keyboard does not stay turned on

i have replaced the batteries and checked to make sure they are installed properly but the keyboard does not stay turned on

Hold the power key on the keyboard down for 5 secs to power off, tap the power button once to start. It should connect automatically.

Critical BitLocker Drive Encryption system files are not available- which was working earlier.

Hello All,
The E drive (external USB drive) of server which was encrypted using bitlocker. earlier it was working perfectly fine. On running the BitLocker configuration screen we are getting with a message stating that ‘Your system
volume is not configured correctly to allow you to use BitLocker Drive Encryption. Critical BitLocker Drive Encryption system files are not available’
now whenever we are clicking on E drive it is showing to format the disk.
can anyone help me to understand which are the files required or repair for bitlocker?
Thanks & Regards,
MAsud Hussain

Hi Masud,
Do you have any progress at the moment?
If there are any related error messages in Event Logs, please post them out for further analyzing.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

My Mac Book Pro has slowed to less than a crawl (possibly from a worm or virus). How do I make sure it's running at peak efficiency before I complain to comcast

My Mac Book Pro has slowed to less than a crawl (possibly from a worm or virus). How do I make sure it's running at peak efficiency before I complain to comcast

Please answer as many of the following questions as you can. You may already have answered some of them; in that case, there's no need to repeat the answers.
Restart the router and the broadband device, if they're separate. Any change?
Run Software Update and install all available updates for OS X or the computer's firmware. Any change?
If possible, connect to the router with an Ethernet cable and turn off Wi-Fi. Any difference?
Are any other devices on the network, and if so, are they the same?
If you can connect to more than one network, are they all the same?
Are all network applications affected, or only some? If only some, which ones?
Is networking always the same, or is the problem intermittent?
Disconnect all other devices from the network. Any change?
If you're running a MacBook with the lid closed, open the lid. Any difference?
Start up in safe mode and test. Any difference?
Start up in Recovery mode. From the OS X Utilities screen, select Get Help Online. A clean copy of Safari will launch. No plugins, such as Flash, will be available. Any difference?
If possible, turn off Bluetooth and disconnect any USB 3 devices. Any difference?

Smartview Error: "Cannot Connect to Provider. Make Sure It Is Running in the Specified Host/Port (503)

I am having an issue retrieving on a SmartView grid running 11.1.2.2.309.01 and SmartView 11.1.2.2.102.I have a grid with three attribute dimension and, at first it was long running and gave me a netretry netinterval error. I shared with my administrator and, they gave me the registry updates to increase my timeout for my default browser. Now, I try to retrieve the same sheet and after approximately five minutes, I get the message, "Smartview Error: "Cannot Connect to Provider. Make Sure It Is Running in the Specified Host/Port (503)". I am not sure what this means. I can retrieve on other grids with one attribute dimension or a regular retrieve but, for some reason, I notice when I retrieve on multiple attribute dimensions, I am having this issue. I had this tested with others and, they are experiencing the same result. Any thoughts. Thanks in advance

The timeout was updated to 7 minutes but, the timeout on the APS was never updated. What happened was there was a 7,000 member dimension where attributes where being used to build a retrieve. The attributes were what was causing the issue. Not to say you should not use attributes. Ultimately, an alternate hierarchy in the 7,000 member dimension will help but, I used other members to get the results I need. I just never saw the error message before and, did not see it in oracle support.. Thanks.

Error: "Cannot connect to the provider. Make sure it is running in the specified host/port. Error (12031)"

Hi,
EPM version: EPM 11.1.2.1
When we are using Zoom In Level as All Levels and tring to drill down for dimention of HFM application we are getting below error.
Error: "Cannot connect to the provider. Make sure it is running in the specified host/port. Error (12031)"
As we found some solution from comunity , we have performed below workaround but still we are getting same error.
·              We have done the changes in mod_wl_ohs.conf file of OHS with (WLIOTimeoutSecs 3600 and WLIOSocketTimeoutSecs 3600)
·              And then restarted OHS and APS service but still we found same error.
Could anyone please suggest ,where can we trace its log from web server and the solution for this issue?
     Thanks,
         D.N. Rana

Hi,
We have already performed the changes for APS in OHS as mentioned in the solution and the path also same as under OHS.
Intially we were getting error for "to increase netRetryCould and NetRetryInterval" as a solution we have added below 3 registry DWORD keys under path
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Internet Settings
"KeepAliveTimeout"=dword:00180000                   (26 Minutes)
"ReceiveTimeout"=dword:00dbba00                      (240 Minutes)
"ServerInfoTimeout"=dword:00180000                  (26 Minutes)
Above error resolved but then we received Error"12031"
Now we have added above 3 DWORD keys under path HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
and now we are not getting the error "12031".
But here we are not getting how it(LB issue) resolved with above solution?
Thanks,
D.N.Rana

How to make sure an applet runs with Java 5?

Hi all,
First let me say thanks for all the help in the past. You've help me go from noob to intermediate noob. I've just about finished my first applet game which can be checked out here .
Now I've been reading about problems with mac and 1.6. (note it works on Linux). I want to make sure that it runs fine and of course I don't own a mac. So I downloaded the 5 JDK. Selected it as the java platform in Netbeans, compiled and it ran fine.
Questions:
Do I have to always use 1.5 to compile and perhaps set it as default?
Since it works in 1.5, do I compile it with 1.6 and just upload?
I'm worried I'm not testing it correctly. I mean if I have both 1.5 and 1.6 installed on my machine, how to I make sure the applet is only using 1.5 to run?
Thanks
Darrin

corlettk wrote:
I haven't got a clue RE your problem other than for max-portability you should compile with [-target 1.5|http://java.sun.com/j2se/1.5.0/docs/tooldocs/solaris/javac.html].
I must say I'm impressed, except I suspect my PC must be substantially faster than any of your test platforms... can you throttle it to CPU performance somehow? Or maybe it's just that my reflexes aren't what they once where.Thanks.
There seem to be two issues. The first is what people are using. This web stats shows pretty poor penetration of 1.6.
[http://www.statowl.com/java.php|http://www.statowl.com/java.php] Penetration: 54% with JRE1.6 + 19% with JRE 1.5. Total 73%.
The second is I've read that mac and 1.6 do not get along except on a 64bit platform.
So for applets there is not much choice but to compile on 1.5 for the broadest user base. I guess the good news is 1.4 and earlier are almost non-existent.
Edited by: Darrin.A on Apr 27, 2009 8:11 AM

Make sure impdp is running

i am using Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi.
How can i make sure impdp is running?
V$session.message = SYS_IMPORT_TABLE_01: IMPORT : 0 out of 27824 MB done
I do not see size of segment increasing or free space in tablespace decreasing.
dba_datapump_jobs.state = Executing
select d.session_type, status, seconds_in_wait, wait_class , event from v$session s ,DBA_DATAPUMP_SESSIONS d where username ='IAMAIN' and program like 'orac%'
and s.saddr = D.SADDR
SESSION_TYPE     STATUS     SECONDS_IN_WAIT     WAIT_CLASS     EVENT
MASTER     ACTIVE     4719     Idle     wait for unread message on broadcast channel
WORKER     ACTIVE     0     User I/O     direct path write
WORKER     ACTIVE     49     Idle     wait for unread message on broadcast channel
It does not have any blocking session , or lockwait.
Please suggest.

sybrand_b wrote:
And after how many seconds you think impdp doesn't work? 5? 2? 1?
I think you should observe a bit more patience. Give your keyboard some rest ;)
It takes a while before impdp has processed metadata.
Sybrand Bakker
Senior Oracle DBAThe tablespace size start reducing after 3 to 5 minutes interval but the job terninated adruptly. So I attach the job but now its 1 hour nothing is happening.
Edited by: spur230 on Jun 4, 2010 11:41 AM

System 'CE3' is not available. Make sure it is running properly.

Similar Messages

Maybe you are looking for