System 'CE3' is not available

hi,
im in CE 7.1 EHP 1. when im trayin to assig a Role to a new task in my process Model i get the error http 502. so i went to Process Instance Tab where i got the error System 'CE3' is not available. Make sure it is running properly.
whatever in windows-->preferences SAP AS Java i have the intance and in Server tab i can see is with status STARTED.
any Idea?

HI,
in nwds
windows>Preferences>Web Services>Enterprise Service Browser>assign the values like
ESR System CE3 and enter the corresponding values....
Regards
Manohar

Similar Messages

System 'CE3' is not available. Make sure it is running properly.

hi,
im in CE 7.1 EHP 1. when im trayin to assig a Role to a new task in my process Model i get the error http 502. so i went to Process Instance Tab where i got the error System 'CE3' is not available. Make sure it is running properly.
whatever in windows-->preferences SAP AS Java i have the intance and in Server tab i can see is with status STARTED.
any Idea?
Thanks.

Hi Rodrigo,
The HTTP error code 502 is 'Bad gateway'. I also experienced this once or twice when I configured a certain proxy (or proxy script) that wasn't able to resolve that host. Try bypassing the proxy or using a special proxy for your host CE3 in the Proxy Settings of your NWDS.
Cheers,
Martin

RSAR2318 : IDoc type for source system T90CLNT090 is not available

Hi all,
I am working on BI + ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Error RSAR238 : IDoc type for source system T90CLNT090 is not available
I have already checked trx & dtps, but could not find resolution.
Kindly help me with this error.
Thanks and regards,
MS

M Sharma wrote:
But how exactly can I create when T90CLNT is not active? Help please.
Yes, you would need to check with BASIS team how they have created an alternate source system (for debugging) & prepare a RFC b/n these systems. Can you just check the settings in the source system and BI source system...and check the source system for the same BI system. Right click > Check and then do a restore or take the help of basis to fix it. What I think is a possible solution is : RSA1 > Source system > Search System > Right Click > Activate

RSAR238 : IDoc type for source system T90CLNT090 is not available

Hi all,
I am working on ECC 6.0. Have created a ODS object using RSA1OLD. While activating the ODS, am getting this error:
1. Error:
R7I028
Object could not be activated
2. Error:
RSAR238
IDoc type for source system T90CLNT090 is not available
Error when creating the export datasource and dependent objects
Kindly help me with this error.
Thanks and regards,
Dhanapal

Hi,
Check the same in SDN..
Object ZDUMMY could not be activatedMessage no. R7I028
Re: DSO Activation problem
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/test-cases-for-module-human-capital-management-1425016
http://sap.ittoolbox.com/groups/technical-functional/sap-bw/idoc-type-for-source-system-t90clnt090-is-not-available-message-no-rsar238-1431565
Thanks
Reddy

System Landscape directory not available error,

I am still a beginner, and I am having some slight trouble understanding, what tools would be needed, and how to install. I am using the forums.
We have the MII Discovery Server up and running.
NWDS Server installation is done.
We have the MII track ready to be used for Development(SLD URL is available) , Userid and password available
I am working on installing the NWDS 7.3 Developer Workspace.
Would I also need to do NWDS Server install on my laptop?
Would these steps be sufficient?
1. Download and install JDK 1.6
2. Copy the file nwds-extsoa-7.3-SP00-PAT0000-win32.zip from:
<your download location>\51039309\DATA_UNITS\JAVA_IDE\distros\com.sap.netweaver.developerstudio.distribution.complete.extsoa\8.30.0.101020102100
to a convenient folder.
3. Extract the content and you will have a folder with name eclipse.
4. Launch the Netweaver Developer Studio from folder eclipse, you may want to create a shortcut on the Desktop.
5. If you haven't maintained JAVA_HOME property or if it's pointing to some other java version, eclipse will complain about it. In the dialog window locate the JDK 1.6 installation. Path to JDK 1.6 should be something like
C:\Program Files\Java\jdk1.6.0_25\bin
6. Restart the NWDS after this and select a suitable workspace.
7. Set the run time engine in NWDS, by going through the menu path:
Window->Preferences->SAP AS JAVA
Question:
1. I am unable to Set the run time engine in NWDS, please could you give me details steps with what I would need to enter for Instance Hostname and Instance Number...etc
2. As part of Development installation do I have to Modifying the Logon Page? Do I have to go thru the Server installation in order to start developing on eclipse environment?
I do not have the war file. How do i Copy the war file tcsecumelogonui.war from
<Installation drive>:\usr\sap\<SID>\J00\j2ee\cluster\apps\sap.com\com.sap.security.core.logon\servlet_jsp\logon_ui_resources\tcsecumelogonui.war
3. System Landscape directory not available error,
In the Component Browser when I right click and select New u2013 Development Configuration u2013 Import From System Landscape Directory (SLD) u2013 Next (Enter UserID and Password)
Thank you

Hello,
For the SLD error, please, configure SLD following as per this docuemtnation:
http://help.sap.com/saphelp_nw04/helpdata/EN/bb/c2b6421a75da11e10000000a155106/frameset.htm
Regarding the settings to enter NWDS to connect to AS Java, you have to enter the java instance data so that NWDS can connect to it in order to make deployments, etc....
Please, see also the following documentation that explains stp by step how to work with NWDS.
http://help.sap.com/saphelp_nw04/helpdata/en/fe/a3996fa314f94f8a0c3475b08636d0/frameset.htm
I hope this helps you.
Regards,
Blanca

The CMS system database is not available (FWM 02088)

Hi all,
After installation of BOE 3.1 the system fires back the error message on attempt to logon to CMS:
Account Information Not Recognized: The CMS system database is not available. This error cannot be rectified by the end user. Report this error to your system administrator or database administrator. (FWM 02088)
Any inputs? I've tried with new SIA as well as fresh installation but the issue persists.
Regards.

were you able to see any DB error messages in event log ?
can you connect to your DB from the server itself ? (could be FW issue)
What do you see under the CCM ? Do the SIA is in green state ?
For me it is probably one of 2 things : FW issue (but install will have failed) or DB issue
Sam.
Edited by: sjolly on Sep 17, 2009 9:46 AM

Critical BitLocker Drive Encryption system files are not available

Hi all,
We are running into some issues when attempting to configure BitLocker Drive Encryption through the BitLocker UI on Windows Server 2008SP2.
On running the BitLocker configuration screen we are presented with a message stating that
‘Your system volume is not configured correctly to allow you to use BitLocker Drive Encryption.
Critical BitLocker Drive Encryption system files are not available’
We believe this issue may have been caused during a recent hardware migration using the DoubleTake Move software as we encountered a similar issue with the Windows Backup utility not seeing any available HDDs.
Has anyone else encountered a similar issue and aware of any potential fix?

I think it should be supported on Windows Server 2008 as it is supported on Windows Vista.
Can you check whether BdeHdCfg.exe is present in System32 folder. If not can you copy the BdeHdCfg.exe installer from higher version of OS and copy it to the system32 folder on Windows Server 2008 and then run the command with the administrative rights.
NOTE : Make sure to change the directory to %SystemDrive%\Windows\System32
Before running the command.
Regards, "Gaurav Ranjan" =========== NOTE: Mark as Answer and Vote as Helpful if it helps =======

Critical BitLocker Drive Encryption system files are not available- which was working earlier.

Hello All,
The E drive (external USB drive) of server which was encrypted using bitlocker. earlier it was working perfectly fine. On running the BitLocker configuration screen we are getting with a message stating that ‘Your system
volume is not configured correctly to allow you to use BitLocker Drive Encryption. Critical BitLocker Drive Encryption system files are not available’
now whenever we are clicking on E drive it is showing to format the disk.
can anyone help me to understand which are the files required or repair for bitlocker?
Thanks & Regards,
MAsud Hussain

Hi Masud,
Do you have any progress at the moment?
If there are any related error messages in Event Logs, please post them out for further analyzing.
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

System Type ERP not available while creating Buisness System For ECC in SAP Sourcing 9.0

Hi,
I need to import Master data in SAP Sourcing but when i am uploading master data i am getting this errror
Business system ECQCLNT340 does not match with local SAP Sourcing System ID SOURCING.
i have followed the steps in config guide of SAP ERP with SAP Sourcing.
when i am creating business system in SAP Sourcing system type ERP is not available.
i have also attached the error file, please check
--------------Version---------------
ECC 6.0 Ehp6
SAP Sourcing 9.0 on NW7.3 Ehp1 on IBM DB2
Thanks and Regards,
Murtaza Najmi

Thanks you Prasad,
this issue has been resolved and i have completed the installation part of SAP Sourcing and Contract generation.
Now , I am getting error while uploading clause document, my functional team member are not able to upload clause document. kindly suggest.
----------------------Error Description---------------
Login with buyer link into the system-> it has all authorizations
then Goto -> Contract Management -> Clause Library -> Clause list -> Click on New button -> Click on Add button -> Browse Document
it is showing POPUP with Error that "There is a problem with the Contract Generation web service Contact your system administrator"
Thanks and Regards,
Murtaza Najmi

Trasformation SAP BW 7.0 system "Copy" Functionality NOT available

Hi,
i started to work with a new SAP BW 7.0 system and i noticed that the copy functionality for the trasformation is not available.
In my previous project i worked on a system SAP BW 7.0 that had this functionality, i mean with right click of the mouse on a trasformation i had: display, change, copy, delete.
Now in the new system i have only display, change and delete.
I compard the patch levels of the two systems:
in the new system we have a SAP_BW patch level 15,
in the previous one i have a SAP_BW level 16.
Could be this one the reason?
Any idea?
Thx

Hi,
Should be yes..
Even we also have BI 7 with SP 7 and SP 18.
In SP 7 I dont have copy option. But in SP 18 this is there...
Siva

Automount: system hang on not available shares -- solution, alternatives?

hello,
i'm using snow leopard 10.6.5 on my macbook pro 13.3 with automount. my automount-entry looks like this (/etc/auto_master):
/Users/abc/backup -fstype=smbfs ://abc:[email protected]/SHARE
Works very well. I am connected to the network by wlan.
Now I disable wlan (or switch my location to somewhere the share is not available). Once a programm (e.g. finder) tries to access the mount location, it hangs for ever. It should simply error out with something like "path not available" after e.g. 5 seconds and give up to try to connect (until the next access of the folder).
So how can i have samba shares available when the network is up and no hang when the network is down? Is there any tool? I assume with "automount" it is not possible...?
Regards,
Markus
Message was edited by: cpo_123

simple shell script is the solution for different wlan.
#!/bin/bash
while true; do
current_wlan="$(/System/Library/PrivateFrameworks/Apple80211.framework/Versions /Current/Resources/airport -I | grep " SSID" | sed 's/.*SSID: //' | sed 's/ /__/g')";
if [ -f "/etc/auto_mount/$current_wlan" ]; then
if [ "$(readlink /etc/auto_lnk)" != "/etc/auto_mount/$current_wlan" ]; then
rm /etc/auto_lnk;
ln -s /etc/auto_mount/$current_wlan /etc/auto_lnk
automount -c
fi;
else
if [ -e "/etc/auto_lnk" ]; then
rm /etc/auto_lnk;
automount -c
fi;
fi;
sleep 15;
done;
Simply run as root. Add /etc/auto_lnk to /etc/auto_master and put a file with auto_master-syntax in /etc/auto_mount/WIFINAME.

System monitoring change not available

Hello,
I am trying to configure system monitoring for one our test system. When I go the system monitoring option under operations setup , I am not finding the "setup system monitoring" service. In SMSY all entries looks okay. We are using solman version 4.0. Any inputs on this ?
Thanks,
Mahesh

Hi Mahesh,
before you can set up the system monitoring you have to assign a system to the solution landscape.
Therefore you have to assign the relevant system to a logical component and the the logical component to the solution landscape. This steps can be performed in transaction SMSY.
After that the "setup system monitoring" session should apper in your solution landscape.
Regards
Thomas

"System Update" is not available without a Motorola service account

Can somebody explain to me what this is or means? It's not mentioned in any of the documentation and it's not mentioned on the majority of these threads when people are sucessfully upating their droids. HELP!
Thanks in advance
VJ

djtonic wrote:
Negative on being hacked/rooted! Just like the instructions read, select settings > system updates and that's when I get this message. Then it asks "Do you want to setup an account" choices are setup or cancel. I select setup and it processes for about 20 sec, then reads "this is taking to long select ok to keep trying in background"
is there a way you have some debug mode turned on or service menu activated or you received a development version of the phone? Have you accessed any "hidden menus" and messed up settings?
Either you or verizon did something to the phone.
I would run into a vzw store and get service codes or send the ph back for replacement.
This is what I was afraid of hearing. At least this confirms my suspictions. All I got out of vzw tech support was that "The only way that phones are being updated is by OTA" and that this is a geographical phased approach til the end of the month. WTH!
Verizon plz properly train your people
Thanks for the reply

Tcode SDCCN not available.

Dear All,
is there any way to activate tcode SDCCN in netweaver.7.0 system. bcos it not available, should i activate something, to get SDCCN tcode available in netweaver 7.0,
Please help me..
Regards,

try the below link for more information on your query, it might be useful
Re: unable to create a service in SDCCN
Regards,
Sumit

CrashReporter complains that "LastResort" font is not available

I have a brand new Mac Pro which I've been installing applications on. Recently I had an issue with Thunderbird crashing, the logs had a bunch of these entries (below) which indicates a system font is not available.
I've not removed anything myself. I'm concerned about this - how can I fix it?
Thanks.
2010-12-27 18:39:15.106 crashreporter[1118:903] Critical failure: the LastResort font is unavailable.
2010-12-27 18:39:15.106 crashreporter[1118:903] Critical failure: the LastResort font is unavailable.
2010-12-27 18:39:15.107 crashreporter[1118:903] Critical failure: the LastResort font is unavailable.
2010-12-27 18:39:15.107 crashreporter[1118:903] Critical failure: the LastResort font is unavailable.
2010-12-27 18:39:15.107 crashreporter[1118:903] Critical failure: the LastResort font is unavailable.
2010-12-27 18:39:15.107 crashreporter[1118:903] Critical failure: the LastResort font is unavailable.
2010-12-27 18:39:15.107 crashreporter[1118:903] Critical failure: the LastResort font is unavailable.
2010-12-27 18:39:15.108 crashreporter[1118:903] Critical failure: the LastResort font is unavailable.
2010-12-27 18:39:15.108 crashreporter[1118:903] Critical failure: the LastResort font is unavailable.

Download and manually install the 10.6.5 COMBO update. If that doesn't fix it, reinstall the OS, which only replaces all the OS components and basic Apple apps, leaving everything else in place. If that fixes it, run Software Update, get back to 10.6.5, repair permissions, and restart.

System 'CE3' is not available

Similar Messages

Maybe you are looking for