System Center 2012 R2 Requirements

Hi guys,
Currently I wish to use System Center 2012 R2 - Operations Manager Server to monitor my Hyper-V hosts (8 Physical Machines) and guests (50 Virtual Machines).
Would also like to use System Center 2012 R2 - ConfigMgr to manage about 500 computers.
Which Server 2012 edition and System Center 2012 R2 edition should I use?
Thanks guys!!

Hi,
To monitor Hyper-v and VMs, we should import Hyper-v management pack.
http://www.microsoft.com/en-us/download/details.aspx?id=36438
This management pack is for Hyper-v 2012, it provides the following functionality:
• Management of critical Hyper-V services that affect virtual machines and host server functionality
• Management of host server logical disks that affect virtual machine health
• Full representation of virtualization in a single Hyper-V host server, including virtual networks, and virtual machines
• Monitoring of virtual machine hardware components that affect availability
In addition, here is a smilar thread, please go through it:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/fb362d76-4955-417a-8ba8-6f88655f6e81/scom-monitoring-virtual-machine-in-vmm
Regards,
Yan Li
Regards, Yan Li

Similar Messages

System Center 2012 R2 Config Manager requirements

Looking to deploy System Center 2012 R2 and have been musing over system requirements. There was slight thud as my jaw hit the floor when I discovered a standalone primary environment (SQL installed on same server as Config Manager) required 32GB of memory!
http://technet.microsoft.com/en-us/library/hh846235.aspx
You would lucky if we had 200 clients. Am I really going to have to assign 32GB of my virtual hosts memory to the server?
I had earmarked 8GB, will this suffice? What is the minimum I can get away with??
Thanks in advance!
Steve

Thanks for the responses folks.
One other question. I am aware that there are co-existence limitations with some of the other Server components (http://technet.microsoft.com/en-us/library/dn281928.aspx) but
(bearing these in mind) can I install other components on my Configuration Manager Server? VMM for example.
If the answer is yes, I would assume I would need even more resources on the Server as well?
Regards,
Steve

FYI Update Rollup 3 for Microsoft System Center 2012 R2 - Virtual Machine Manager (KB2965413) Stops SCVMM service starting

I just applied update:
Update Rollup 3 for Microsoft System Center 2012 R2 - Virtual Machine Manager (KB2965413)
and (KB2965414) but it failed to install.
After a reboot I could not login to the VMM and the service would not start
An event id 0 was reported with:
Service cannot be started. System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
   at System.Reflection.RuntimeModule.GetTypes(RuntimeModule module)
   at System.Reflection.RuntimeModule.GetTypes()
   at System.Reflection.Assembly.GetTypes()
   at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.BuildKnownAssemblyTypes(Assembly assembly)
   at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.InitializeKnownTypesCache(List`1 assembliesToExamine)
   at Microsoft.VirtualManager.Engine.Remoting.IndigoServiceHost.InitializeKnownTypesCache()
   at Microsoft.VirtualManager.Engine.VirtualManagerService.TimeStartupMethod(String description, TimedStartupMethod methodToTime)
   at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStart(String[] args)
   at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
After I removed the update the VMM was able to start, no reboot required.
When I have time I will try to apply both updates again successfully and see if the issue still occurs.
Vista Ultimate Dell XPS M1330

FYI. I've had the same issue after I installed Update Rollup 3 (KB2965413), seeing the exact same error on event log. Tried to start the service manually, getting service unable to start error. This is a machine running
with Windows Server 2012 Standard. Solution for me is simple. I just install
KB2965414 (Update Rollup 3 for SCVMM 2012 R2), reboot the server, and the SCVMM service auto start up by itself.

Configuration issue on two items for system center 2012 config manager

My first issue was at the beginning of the install trying to extend the AD schema for system center 2012 config manager version 7.5.1561.0. The
path is missing for SMSSetup\Bin\x64\ to execute
Extadsch.exe is not on my disc. There is only a x86 and 64 bit folder with no bin.
Second issue when creating configuration manager connector. Error connecting to the database. So i went to my sqlserver and checked the permissions on the account I did notice that there are no smsdbrole_extract role permissions. Did I miss a step somewhere
along the way? On a side not that this is an instance and not under the default place. Also, i am using sql 2008 R2 version.

OK, nothing wrong with that per se, but it has nothing to do with ConfigMgr. Also, ConfigMgr is not a "module", it's a distinct product unto itself with its own unique requirements and dependencies that is also architecturally completely different. So,
there's nothing to uninstall to install ConfigMgr. Also, I hope you're not trying to install these products on the same server. That is OK for a small lab environment, but nothing more. Even then, I wouldn't do it since its never something you'd do in production.
As mentioned, each product has its own unique dependencies with no true overlap.
Jason | http://blog.configmgrftw.com

UCS Management Pack for System Center 2012 OpsMgr add monitor wizard error

We're successfully using the 2.6.0.179 version of the UCS Management Pack for System Center 2012 Operations Manager in our 2012 SP1 OpsMgr environment; however, in the new 2012 R2 OpsMgr environment we've stood-up and in which we installed the 2.6.2.0 version of the UCS MP, we're getting an error when trying to run the Add Monitoring Wizard under the Management Pack Templates node of the Authoring pane. We get the same error from the 2.6.1.0 version of the UCS MP as well. The text of the error is as follows:
"The page [Cisco.UCS.MP.UI.Proxy.Template.Page.ProxyDetailsPage] in the assembly [Cisco.UCS.MP.UI.Culture="",PublicKeyToken="6c96076cdf2c87a",Version="2.6.0.0"] could not be loaded. Please make sure that the account you are running under has sufficient privileges to load the given assembly, or the management pack that defines this page is installed or the assembly containing the page is in the path of the executible or that the page derives from known Operations Manager page type."
I'm an admin user in OpsMgr, so this should not be a user privilege issue, and that leaves the MP itself. The fact that a 2.6.0.0 version is mentioned makes me wonder if the base version of the MP must be installed before the 2.6.2 version. I'd test this, but we no longer have that version, and its no longer available for download from Cisco that I can see.
Has any dealt with this issue successfully, or have any insight into the problem?

Solved...the requirement is that you must do the MP configuration from the SCOM console on the SCOM Management Server where you installed the Cisco UCS MP; you can't do it from a SCOM console on a remote computer like I was trying to do.

System Center 2012 VMM Install Problems

So I have been trying to install System Center 2012 VMM on a fresh instance of Server 2012 R2 Standard. I have insured that all of the prerequisites are installed that are required, but I receive the following errors:
From the install Wizard - Installing E:\amd64\setup\msi\Server\vmmServer.msi failed with Windows Installer error 1603.
See C:\ProgramData\VMMLogs\vmmServer.log for more information. After resolving the problem, retry setup.
From Event Viewer - Product: Microsoft System Center Virtual Machine Manager (x64) -- Error 1720. There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your support personel or package
vendor. Custom action ConfigWsman script error - 2147221503, : Line 260, Column 9,
From vmmServer.log - This log file is too large to post in its entirety so here is where I think the problem is.
Action start 15:54:27: PublishProduct.
MSI (s) (A4:C8) [15:54:27:908]: Doing action: ConfigWsman
MSI (s) (A4:C8) [15:54:27:908]: Note: 1: 2205 2: 3: ActionText
Action ended 15:54:27: PublishProduct. Return value 1.
Action start 15:54:27: ConfigWsman.
MSI (s) (A4:B4) [15:54:27:977]: I/O on thread 2904 could not be cancelled. Error: 1168
MSI (s) (A4:B4) [15:54:27:977]: I/o on thread 3020 could not be cancelled. Error: 1168
MSI (s) (A4:B4) [15:54:27:977]: I/O on thread 1264 could not be cancelled. Error: 1168
MSI (s) (A4:B4) [15:54:27:977]: I/O on thread 2576 could not be cancelled. Error: 1168
MSI (s) (A4:B4) [15:54:27:977]: I/O on thread 616 could not be cancelled. Error 1168
MSI (s) (A4:B4) [15:54:27:977]: I/O on thread 1276 could not be cancelled. Error 1168
MSI (s) (A4:B4) [15:54:27:977]: I/O on thread 1912 could not be cancelled. Error 1168
MSI (s) (A4:B4) [15:54:27:977]: I/O on thread 3036 could not be cancelled. Error 1168
MSI (s) (A4:B4) [15:54:27:977]: I/O on thread 2816 could not be cancelled. Error 1168
MSI (s) (A4:B4) [15:54:27:977]: I/O on thread 2504 could not be cancelled. Error 1168
MSI (s) (A4:B4) [15:54:27:977]: I/O on thread 1512 could not be cancelled. Error 1168
MSI (s) (A4:B4) [15:54:27:977]: I/O on thread 1248 could not be cancelled. Error 1168
MSI (s) (A4:E0) [15:54:27:978]: Product: Microsoft Sysyem Center Virtual Machine Manager Server (x64) -- Error 1720. There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your support
personnel or package vendor. Custom action ConfigWsman script error -2147221503, : Line 260, Column 9,
Error 1720. There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor. Custom action ConfigWsman script error -2147221503,: Line 260, Column 9,
MSI (s) (A4:C8) [15:54:27:983]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (A4:C8) [15:54:27:983]: Machine policy value 'DisableRollback' is 0
MSI (s) (A4:C8) [15:54:27:983]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollbacl\Scripts 3:2
Action ended 15:54:27: ConfigWsman. Return value 3.

Hi Sir,
>> There is a problem with this Windows Installer package. A script required for this install to complete could not be run. Contact your support personnel or package vendor. Custom action ConfigWsman script error -2147221503, : Line 260, Column
9,
It seems ConfigWsman failed .
I would suggest you to perform a check for SCVMM installation environment via running scvmm configuration analyzer:
http://blogs.technet.com/b/scvmm/archive/2012/04/26/using-system-center-2012-virtual-machine-manager-configuration-analyzer-vmmca-to-resolve-common-issues.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Reg : System center 2012 R2 - H/W Configuration

Is there any minimal H/W configuration to set up the System center 2012 R2 other than the H/W configuration available at "http://technet.microsoft.com/en-us/library/dn726764.aspx".
Thanks is advance
Darius James
Guna MK

Yes, I understand that, it is a good guide to state the Hardware Requirements. But for an Evaluation, no one can set up around 84 GB of RAM and all servers. There should be some minimal configurations to evaluate.
Thanks is advance
Darius James
Guna MK

Import System Center Monitoring Pack for System Center 2012 - Service Manager into SCOM 2007 R2

I would like to know if there is SCSM 2012 SP1 MP available for SCOM 2007 R2 ?
I downloaded the "System Center Monitoring Pack for System Center 2012 - Service Manager" MP from
http://www.microsoft.com/en-us/download/details.aspx?id=29980 and then import into SCOM 2007 R2, however, I found that there are some MP dependencies issue.
For example, the "Microsoft System Center Service Manager Library" MP requires "Microsoft SystemCenter Library" and "System.Health.Library" MPs of version 7.0.8427.0. Howerver, the "Microsoft SystemCenter Library"
and "System.Health.Library" MP in SCOM 2007 R2 is of version 6.1.7221.0

Import Management Pack from DVD disk SCOM 2012 R2
SW_DVD5_Sys_Ctr_2012_R2_English_OpsMgr_MLF_X19-18307.ISO\ManagementPacks
Have a nice day !!!

System Center 2012 Endpoint Protection - any user may reboot Windows Server

Hello,
I've got System Center 2012 Endpoint Protection client installed on a Windows Server 2008 R2 Terminal Server. I've just noticed that if System Center Endpoint Protection detects some malware that requires system restart in order to successfully clean it,
the notification will be seen by all logged users on Terminal Server and if anyone will press on "Restart" than the Server will reboot even if User hasn't the required permission and I think this is totally unacceptable, Microsoft has to do something
about it. In all situations only an Administrator should have the right to restart the Server.
Please fix this issue asap, thank you.

While there is no setting that just controls the 'SCEP needs to reboot', there are other settings that might help.
Have you tried setting "Disable the client user interface" to Yes on the antimalware policy? How about "Show notifications messages..."? I don't have a way to reproduce the behavior you were seeing, but maybe you can give it a shot.
I understand why Microsoft would want to give non-admin users a prompt to reboot a machine that needs it to remove malware. This is the typical scenario for most workstations. However, your exception with a terminal server is definitely something that
needs a workaround.
If you put in Connect feedback asking for a discreet setting to control this, please post a link to it.
I hope that helps,
Nash
Nash Pherson, Senior Systems Consultant
Now Micro -
My Blog Posts
If you've found a bug or want the product worked differently,
share your feedback.
<-- If this post was helpful, please click "Vote as Helpful".

Microsoft System Center 2012 Endpoint Protection compared to Sophos endpoint protection.

Hi All,
We are currently running Sophos Enterprise Console with Sophos Endpoint protection in our environment. We use most of the Sophos functionality with Device Control, Application Control, Disk Encryption and Tamper Protection. We are looking to move to
Microsoft System Center 2012 Endpoint Protection, but is not sure if the Microsoft product will be able to offer us the same functionality as the Sophos product with the same level of protection.
I have done some research and found that we will have to implement MDOP with System Center to come close to achieve our Sophos functionality. Is this true? Or can everything be centrally managed?
Please advise with suggestions before we get rid of Sophos will be highly appreciated.
Kind Regards,
Francois Kaljee
Regards Francois Kaljee IT Systems Administrator MCITP Svr2k8 Direct: +2712 381 1000 Cell: +2782 852 2367 Fax: +2786 602 8482 GPS: S 25 39.639 E 27 50.699 Hernic's Street Address: R/E of PTN 103 De Kroon 444 JQ Brits 0250 South Africa Hernic's
Postal Address: P.O.Box 4534 Brits 0250 South Africa

Most third-party security vendors have multiple products that they bundle together. You need to sit down and define your requirements in terms of functionality and features and then map those to Microsoft's offerings. Trying to find equivalent "products"
won't really work.
You also need to look at the cost. It's quite possible that many of the required MS technologies are available to you through your EA. This is the way to sell a strategy like this to your business.
Simply comparing product features won't work. It should be a combination of
1. what do I actually need?
2. what will it cost?
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Password for the System Center 2012 R2 Orchestrator Evaluation VHD

I recently downloaded the Evaluation VHD for System Center 2012 R2 Orchestrator. After performing the initial setup, I am unable to log in with the credentials that i had provided initially for the Administrator. I faced a similar situation while working
with Evaluation VHD for System Center 2012 R2 App Controller. In that case, after some searches I found 'R2Preview!' as its default password. I have already tried other passwords - P@ssword1, P@ssword, p@ssword1, password1, blank password.
I hope someone can help me with this !

Sorry,
http://www.microsoft.com/en-us/download/details.aspx?id=39297:"For the
password type pass@word1"
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

How to access for Virtual machines in System Center 2012 r2 by remote console through code?

Hi All,
I am new in System Center. I am using System Center 2012 R2. I have a web application written by dot net, which shows the list of virtual machines created in the SCVMM. Now, I need to select a Virtual Machine from the list, and click a link named "console
access". This will allow the console access to the virtual machine. How can I perform this task?
Thanks in advance,
Moohak

The SCVMM VM console is an ActiveX application.
It is installed with the SCVMM Console application.
If you search around for the old SCVMM Self Service portal, you will discover how MSFT originally enabled this from a web front end.
If you look at Windows Azure Pack you will find a new pattern using RDP gateway.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Error message while upgrading to System Center 2012 R2 Orchestrator

I recently tried upgrading System Center 2012 Service Pack 1 Orchestrator to System Center 2012 R2 Orchestrator on a Windows Server 2012 instance, running in VMware Workstation. According to the Microsoft TechNet documentation, you basically remove all of
the Service Pack 1 Orchestrator components, and then install the new R2 Orchestrator components.
Management Service
Runbook Service
Orchestrator console and web service
So, that's what I did. When it got to the point of running the Orchestration Console and Web Service installation, it failed.
The relevant portion of WebComponents.msi log file indicates the following:
MSI (s) (10:A8) [10:52:15:669]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIC647.tmp, Entrypoint: WriteIIS7ConfigChanges
WriteIIS7ConfigChanges: Error 0x80090016: Failed to Commit IIS Config Changes
WriteIIS7ConfigChanges: Error 0x80090016: WriteIIS7ConfigChanges Failed.
CustomAction WriteIIS7ConfigChanges returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (10:4C) [10:52:15:760]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (10:4C) [10:52:15:760]: User policy value 'DisableRollback' is 0
MSI (s) (10:4C) [10:52:15:760]: Machine policy value 'DisableRollback' is 0
Action ended 10:52:15: InstallFinalize. Return value 3.
Screenshot:
So far, I have tried removing IIS and reinstalling it completely from scratch. That has made zero impact on the problem thus far. I posted this same issue over at
Server Fault, but am adding it here for visibility.
If this post was helpful, please click the little "Vote as Helpful" button :)
Trevor Sullivan
Trevor Sullivan's Tech Room
Twitter Profile

For anyone else, you may need to reset any failed jobs statusid back to 3 after you run the script from
http://technet.microsoft.com/en-us/library/dn299381.aspx (first
issue)
and after that run your jobs in correct order.
I had to reset the statusid for DWMaintenence and common.load.
Aengus

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

Problem in the first run of "System Center 2012 R2 Operations Manager – Evaluation (VHD)"

Hi All,
I need to evaluate the "System Center 2012 R2 Operations Manager" so I downloaded the Evaluation VHD from this URL:
http://www.microsoft.com/en-us/download/details.aspx?id=40844
I downloaded all the 13x ISO images and used the supplied SC2012_R2_SCOM_EVALVHD.exe to
rebuild the VHD file. I am using Windows Server 2012 Standard.
As indicated by the install instructions, I used “OM2012R2_VHDEval.docx"
to create the Virtual Machine to run Operations Manager. Problems:
1) when I first connected to the Virtual Machine just created in Hyper-V, there was a cmd window saying that was impossible to connect to the domain I provided. i think the domain was correct. Is this error a showstopper or the Operation Manager should be
able to run anyway?
2) To run Operation Manager on the Virtual Machine, the install guide says "On the desktop of the virtual machine, double-click the
Operations Manager Console folder. Operations Manager Console
folder provides access to different parts of Operations Manager. Double-click
Operations Console to open the Operations Manager console."
so I did click on the Operation Console icon but it says the file does not exist in the Virtual Machine. How is that possible if this is a prepackaged Virtual Machine ready to use for evaluation? I checked the pointed folder and actually inside "c:\Program
Files" there is no System Center folder at all..?
Any help would be much appreciated, I'm kind of lost at the moment and not sure how to get started with this (to me) new software.
Thansk.
W.

Hi All,
I need to evaluate the "System Center 2012 R2 Operations Manager" so I downloaded the Evaluation VHD from this URL:
http://www.microsoft.com/en-us/download/details.aspx?id=40844
I downloaded all the 13x ISO images and used the supplied SC2012_R2_SCOM_EVALVHD.exe to
rebuild the VHD file. I am using Windows Server 2012 Standard.
As indicated by the install instructions, I used “OM2012R2_VHDEval.docx" to create the Virtual Machine to run Operations Manager.
Problems:
1) when I first connected to the Virtual Machine just created in Hyper-V, there was a cmd window saying that was impossible to connect to the domain I provided. i think the domain was correct. Is this error a showstopper or the Operation Manager should be able
to run anyway?
2) To run Operation Manager on the Virtual Machine, the install guide says "On the desktop
of the virtual machine, double-click the Operations Manager Console folder.
Operations Manager Console folder
provides access to different parts of Operations Manager. Double-click Operations Console to
open the Operations Manager console." so I did click on the Operation Console
icon but it says the file does not exist in the Virtual Machine. How is that possible if this is a prepackaged Virtual Machine ready to use for evaluation? I checked the pointed folder and actually inside "c:\Program Files" there is no System Center
folder at all..?
Any help would be much appreciated, I'm kind of lost at the moment and not sure how to get started with this (to me) new software.
Thansk.
W.

System Center 2012 R2 Requirements

Similar Messages

Maybe you are looking for