System Center 2012 Service Pack 1 Configuration Manager – Evaluation (VHD)
I just downloaded this and am running this VM on Oracle Virtual Box. It loads up fine, but it seems as though SQL will not run as it says the trial period has expired. I tried adjusting the date of the VM to a year ago, and that didn't fix it.
Anyone else run into this?
Thanks.
Hi,
I am having the same problem on Hyper-V (the server version is Windows Server 2012). Can someone from the System Center team help out here?
Restating the problem:
Downloaded the System Center Configuration Manager 2012 SP1 Eval vhd. After less than 3 weeks, an error is generated in the Windows Application Event Log saying that "SQL Server evaluation period has expired".
Event ID: 17051
Source: MSSQLSERVER
Level: Error
So, the SMS WMI Provider fails, which in turn fails the System Center Configuration Manager 2012 Console.
On the desktop of this virtual (i.e. where the SQL error occurs), in the lower right hand corner, it says "Windows License valid for 158 days".
Thanks in advance.
Anthony LaMark
Similar Messages
-
Import System Center Monitoring Pack for System Center 2012 - Service Manager into SCOM 2007 R2
I would like to know if there is SCSM 2012 SP1 MP available for SCOM 2007 R2 ?
I downloaded the "System Center Monitoring Pack for System Center 2012 - Service Manager" MP from
http://www.microsoft.com/en-us/download/details.aspx?id=29980 and then import into SCOM 2007 R2, however, I found that there are some MP dependencies issue.
For example, the "Microsoft System Center Service Manager Library" MP requires "Microsoft SystemCenter Library" and "System.Health.Library" MPs of version 7.0.8427.0. Howerver, the "Microsoft SystemCenter Library"
and "System.Health.Library" MP in SCOM 2007 R2 is of version 6.1.7221.0Import Management Pack from DVD disk SCOM 2012 R2
SW_DVD5_Sys_Ctr_2012_R2_English_OpsMgr_MLF_X19-18307.ISO\ManagementPacks
Have a nice day !!! -
I just applied update:
Update Rollup 3 for Microsoft System Center 2012 R2 - Virtual Machine Manager (KB2965413)
and (KB2965414) but it failed to install.
After a reboot I could not login to the VMM and the service would not start
An event id 0 was reported with:
Service cannot be started. System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
at System.Reflection.RuntimeModule.GetTypes(RuntimeModule module)
at System.Reflection.RuntimeModule.GetTypes()
at System.Reflection.Assembly.GetTypes()
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.BuildKnownAssemblyTypes(Assembly assembly)
at Microsoft.VirtualManager.Remoting.IndigoSerializableObject.InitializeKnownTypesCache(List`1 assembliesToExamine)
at Microsoft.VirtualManager.Engine.Remoting.IndigoServiceHost.InitializeKnownTypesCache()
at Microsoft.VirtualManager.Engine.VirtualManagerService.TimeStartupMethod(String description, TimedStartupMethod methodToTime)
at Microsoft.VirtualManager.Engine.VirtualManagerService.OnStart(String[] args)
at System.ServiceProcess.ServiceBase.ServiceQueuedMainCallback(Object state)
After I removed the update the VMM was able to start, no reboot required.
When I have time I will try to apply both updates again successfully and see if the issue still occurs.
Vista Ultimate Dell XPS M1330FYI. I've had the same issue after I installed Update Rollup 3 (KB2965413), seeing the exact same error on event log. Tried to start the service manually, getting service unable to start error. This is a machine running
with Windows Server 2012 Standard. Solution for me is simple. I just install
KB2965414 (Update Rollup 3 for SCVMM 2012 R2), reboot the server, and the SCVMM service auto start up by itself. -
Error installing DPM Agent in Update Rollup 5 for System Center 2012 R2 Data Protection Manager
I have updated my main DPM server to Update Rollup 5 for System Center 2012 R2 Data Protection Manager and all went well.
All Protected servers updated and rebooted and continued protection - EXCEPT one;
Physical Windows Server 2012 R2 Datacenter.
Tried Manual install - no luck
Removed Protection Agent / rebooted / re-installed - no luck
Installed all updates / re-install - no luck
this seems to be the only indicated problem in MSDPMAgentInstall.LOG.....
Property(S): PATCHMediaSrcProp = C:\Windows\Microsoft Data Protection Manager\DPM\ProtectionAgents\RA\4.2.1292.0\DPMProtectionAgent_KB3021791.msp
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent - Update 'Microsoft System Center 2012 R2 DPM Protection Agent Update - KB3021791' could not be installed. Error code 1603. Additional information is available in
the log file C:\Windows\\Temp\MSDPMAgentInstall.LOG.
MSI (s) (04:34) [09:24:23:772]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft System
Center 2012 R2 DPM Protection Agent Update - KB3021791. Installation success or error status: 1603.
MSI (s) (04:34) [09:24:23:772]: Note: 1: 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1729
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2205 2: 3: Error
MSI (s) (04:34) [09:24:23:772]: Note: 1: 2228 2: 3: Error 4: SELECT `Message` FROM `Error` WHERE `Error` = 1709
MSI (s) (04:34) [09:24:23:772]: Product: Microsoft System Center 2012 R2 DPM Protection Agent -- Configuration failed.
MSI (s) (04:34) [09:24:23:772]: Windows Installer reconfigured the product. Product Name: Microsoft System Center 2012 R2 DPM Protection Agent. Product Version: 4.2.1292.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Reconfiguration success
or error status: 1603.
Any help would be greatly appreciated.Hotfix for known issue with Update Rollup 5 for System Center 2012 R2 Data Protection Manager
http://www.microsoft.com/en-us/download/details.aspx?id=45914&WT.mc_id=rss_alldownloads_all
Have a nice day !!!
DPM 2012 R2: Remove Recovery Points -
Is backing up and Restoring SharePoint 2013 Farm with SQL 2012 "Always On" High Availability now supported using "System Center 2012 R2 Data Protection Manager"?
I cannot find confirmation anywhere.
Regards,
JohnPer this thread
http://social.technet.microsoft.com/Forums/en-US/0c047737-4733-4ad5-a24d-3e6e6ff42f70/dpm-2012-sp1-and-sharepoint-2013-on-a-sql-2012-alwayson-ag?forum=dpmsharepointbackup, no it does not look like this is supported.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Is backing up and Restoring SharePoint 2013 SP1 Farm with SQL 2014 RTM "Always On" High Availability now supported using "System Center 2012 R2 Data Protection Manager"?
I cannot find information anywhere.
Regards,
IgorThis is a DPM supportability issue, I believe. Last I heard, no it was not supported. SharePoint 2013 does not support SQL 2014 until the April 2014 CU. The CU should be out soon, although it appears to have been delayed (usually comes out on Patch Tuesday,
which was this past Tuesday).
Trevor Seward
Follow or contact me at...
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Update Rollup 5 for System Center 2012 R2 Data Protection Manager
Hi.
I am currently on update UR1. Is it possibel / recommended to upgrade to UR5 directly from UR1?
Regards
RoarHHi Roar,
Yes its possible to update from RU1 to RU5 but be aware there are some known issues with UR5 which require Hotfixes.
https://www.microsoft.com/en-us/download/details.aspx?id=45914
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
Upgrading SC 2012 Service Manager SP1 to System Center 2012 R2 - ERROR
Hi all
Problems when upgrade from Service Manager in Microsoft System Center 2012 Service Pack 1 (SP1) to Service Manager in System Center 2012 R2 in test lab.
I have two servers:
SM - Windows 2012, SQL 2012 SP1, SCSM 2012 SP1 CU2
DW - Windows 2012, SQL 2012 SP1, SCSM 2012 SP1 CU2.
I successfully installed SCSM 2012 R2 on both servers.
After restart data warehouse jobs receive error in Operation Manager log on DW.
Log Name: Operations Manager
Source: Data Warehouse
Date: 18.10.2013 20:15:48
Event ID: 33503
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: DW2012.contoso.loc
Description:
An error countered while attempting to execute ETL Module:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityRelatesToEntityFact
Message: UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.
Stack: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader()
at Microsoft.SystemCenter.Warehouse.Utility.SqlHelper.ExecuteReader(SqlConnection sqlCon, CommandType cmdType, String cmdText, SqlParameter[] parameters)
at Microsoft.SystemCenter.Warehouse.Etl.StoredProcedure.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser, Int32 batchSize)
at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
at Microsoft.SystemCenter.Etl.ETLModule.OnDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback completionCallback, Object completionState)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Data Warehouse" />
<EventID Qualifiers="32768">33503</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-10-18T14:15:48.000000000Z" />
<EventRecordID>13089</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>DW2012.contoso.loc</Computer>
<Security />
</System>
<EventData>
<Data>Transform</Data>
<Data>22989</Data>
<Data>TransformEntityRelatesToEntityFact</Data>
<Data>UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.</Data>
<Data> at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
at System.Data.SqlClient.SqlCommand.ExecuteReader()
at Microsoft.SystemCenter.Warehouse.Utility.SqlHelper.ExecuteReader(SqlConnection sqlCon, CommandType cmdType, String cmdText, SqlParameter[] parameters)
at Microsoft.SystemCenter.Warehouse.Etl.StoredProcedure.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser, Int32 batchSize)
at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
at Microsoft.SystemCenter.Etl.ETLModule.OnDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback completionCallback, Object completionState)</Data>
</EventData>
</Event>
Log Name: Operations Manager
Source: Data Warehouse
Date: 18.10.2013 20:15:49
Event ID: 33502
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: DW2012.contoso.loc
Description:
ETL Module Execution failed:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityRelatesToEntityFact
Message: UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.
Log Name: Operations Manager
Source: Data Warehouse
Date: 18.10.2013 20:15:49
Event ID: 33502
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: DW2012.contoso.loc
Description:
ETL Module Execution failed:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityManagedTypeFact
Message: UNION ALL view 'DWRepository.dbo.EntityManagedTypeFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityManagedTypeFact_2013_May]'.
How to fix this error?For anyone else, you may need to reset any failed jobs statusid back to 3 after you run the script from
http://technet.microsoft.com/en-us/library/dn299381.aspx (first
issue)
and after that run your jobs in correct order.
I had to reset the statusid for DWMaintenence and common.load.
Aengus -
Error message while upgrading to System Center 2012 R2 Orchestrator
I recently tried upgrading System Center 2012 Service Pack 1 Orchestrator to System Center 2012 R2 Orchestrator on a Windows Server 2012 instance, running in VMware Workstation. According to the Microsoft TechNet documentation, you basically remove all of
the Service Pack 1 Orchestrator components, and then install the new R2 Orchestrator components.
Management Service
Runbook Service
Orchestrator console and web service
So, that's what I did. When it got to the point of running the Orchestration Console and Web Service installation, it failed.
The relevant portion of WebComponents.msi log file indicates the following:
MSI (s) (10:A8) [10:52:15:669]: Invoking remote custom action. DLL: C:\Windows\Installer\MSIC647.tmp, Entrypoint: WriteIIS7ConfigChanges
WriteIIS7ConfigChanges: Error 0x80090016: Failed to Commit IIS Config Changes
WriteIIS7ConfigChanges: Error 0x80090016: WriteIIS7ConfigChanges Failed.
CustomAction WriteIIS7ConfigChanges returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (10:4C) [10:52:15:760]: Note: 1: 2265 2: 3: -2147287035
MSI (s) (10:4C) [10:52:15:760]: User policy value 'DisableRollback' is 0
MSI (s) (10:4C) [10:52:15:760]: Machine policy value 'DisableRollback' is 0
Action ended 10:52:15: InstallFinalize. Return value 3.
Screenshot:
So far, I have tried removing IIS and reinstalling it completely from scratch. That has made zero impact on the problem thus far. I posted this same issue over at
Server Fault, but am adding it here for visibility.
If this post was helpful, please click the little "Vote as Helpful" button :)
Trevor Sullivan
Trevor Sullivan's Tech Room
Twitter ProfileFor anyone else, you may need to reset any failed jobs statusid back to 3 after you run the script from
http://technet.microsoft.com/en-us/library/dn299381.aspx (first
issue)
and after that run your jobs in correct order.
I had to reset the statusid for DWMaintenence and common.load.
Aengus -
System Center 2012 R2 Requirements
Hi guys,
Currently I wish to use System Center 2012 R2 - Operations Manager Server to monitor my Hyper-V hosts (8 Physical Machines) and guests (50 Virtual Machines).
Would also like to use System Center 2012 R2 - ConfigMgr to manage about 500 computers.
Which Server 2012 edition and System Center 2012 R2 edition should I use?
Thanks guys!!Hi,
To monitor Hyper-v and VMs, we should import Hyper-v management pack.
http://www.microsoft.com/en-us/download/details.aspx?id=36438
This management pack is for Hyper-v 2012, it provides the following functionality:
• Management of critical Hyper-V services that affect virtual machines and host server functionality
• Management of host server logical disks that affect virtual machine health
• Full representation of virtualization in a single Hyper-V host server, including virtual networks, and virtual machines
• Monitoring of virtual machine hardware components that affect availability
In addition, here is a smilar thread, please go through it:
http://social.technet.microsoft.com/Forums/systemcenter/en-US/fb362d76-4955-417a-8ba8-6f88655f6e81/scom-monitoring-virtual-machine-in-vmm
Regards,
Yan Li
Regards, Yan Li -
System Center 2012 R2 VMM and guest NLB
Hello,
We have System Center 2012 R2 Virtual Machine manager deployed. Here is one issue related to the networking. In case of deploying guest 2 node NLB cluster (unicast mode) in VM properties we see that IP and MAC address settings are changed
to Dynamic. As result when we click on Connection details there is no information. Is it by design? Is there any way of deploying NLB clusters without VIP and Service templates? If you say no I have 2 questions: 1. How to migrate existing guest NLB cluster
into VMM and have Connection details information; 2. How about using Generation 2 vm's in service templates?
Thank youIf you deploy a NLB node by node, using VM templates, there's no out-of-the bpx way to create a NLB or a cluster, but you can use :
- VMM power-shell scripting : You can devlop a script that depoly 2 VMs than configure their IP
- Run once command that you can add via UI or via poweshell when deploying your VMs
In the P2V case, this is more tricky. In the case of a cluster or NLB P2V, you can:
- Place the first NLB/Cluster node in maintenance mode
- Convert this node using your P2V tool or VMM (before 2012 R2)
- Verify the network configuration and turn off the maintenance mode so the VM re-join the NLB/Cluster
- Place the second (Physical) NLB/Cluster node in maintenance mode
- Convert this node using your P2V tool or VMM (before 2012 R2)
- Verify the network configuration and turn off the maintenance mode so the VM re-join the NLB/Cluster
and so on for all your NLB/Cluster nodes
Regards, Samir Farhat Infrastructure Consultant -
Update Rollup 8 for System Center 2012 SPM - DPM Error
Hi,
I am trying to install the above security update onto my 2012 DPM server but it keeps failing.
MSI (s) (64:EC) [11:16:20:172]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 1729
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed.
I see there is a forum article for dpm 2012 Update Rollup 3 could not be installed, however nothing for Update 8.
Is the fix the same?
Thanks
SimonHi,
I am trying to install the above security update onto my 2012 DPM server but it keeps failing.
MSI (s) (64:EC) [11:16:20:172]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 1729
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:172]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Transforming table Error.
MSI (s) (64:EC) [11:16:20:188]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (64:EC) [11:16:20:188]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed.
I see there is a forum article for dpm 2012 Update Rollup 3 could not be installed, however nothing for Update 8.
Is the fix the same?
Thanks
Simon
Facing Exact same issue. Below is log:
MSI (s) (80:84) [00:37:39:482]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager - Update 'Microsoft Data Protection Manager 2010 Update - KB2991995' could not be installed. Error code 1603. Additional information is available in the log
file C:\Program Files\Microsoft System Center 2012\DPM\DPMLogs\DataProtectionManager-KB2991995.log.
=== Logging stopped: 3/9/2015 0:37:39 ===
MSI (s) (80:84) [00:37:39:482]: Windows Installer installed an update. Product Name: Microsoft System Center 2012 SP1 - Data Protection Manager. Product Version: 4.1.3313.0. Product Language: 1033. Manufacturer: Microsoft Corporation. Update Name: Microsoft
Data Protection Manager 2010 Update - KB2991995. Installation success or error status: 1603.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 1729
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:482]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:482]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Transforming table Error.
MSI (s) (80:84) [00:37:39:497]: Note: 1: 2262 2: Error 3: -2147287038
MSI (s) (80:84) [00:37:39:497]: Product: Microsoft System Center 2012 SP1 - Data Protection Manager -- Configuration failed. -
Confing manager unable to connect-config manager evaluation vhd
Hi
I downloaded the sccm 2012 config mamanger r2 evaluation VHD, However config manager will not connect as it seems like SQL licence has expired, is there a work around other than getting my own SQL licence
ThanksHi,
Did you download it from here?
System Center 2012 R2 Configuration Manager – Evaluation (VHD)
http://www.microsoft.com/en-in/download/details.aspx?id=40840
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
UCS Management Pack for System Center 2012 OpsMgr add monitor wizard error
We're successfully using the 2.6.0.179 version of the UCS Management Pack for System Center 2012 Operations Manager in our 2012 SP1 OpsMgr environment; however, in the new 2012 R2 OpsMgr environment we've stood-up and in which we installed the 2.6.2.0 version of the UCS MP, we're getting an error when trying to run the Add Monitoring Wizard under the Management Pack Templates node of the Authoring pane. We get the same error from the 2.6.1.0 version of the UCS MP as well. The text of the error is as follows:
"The page [Cisco.UCS.MP.UI.Proxy.Template.Page.ProxyDetailsPage] in the assembly [Cisco.UCS.MP.UI.Culture="",PublicKeyToken="6c96076cdf2c87a",Version="2.6.0.0"] could not be loaded. Please make sure that the account you are running under has sufficient privileges to load the given assembly, or the management pack that defines this page is installed or the assembly containing the page is in the path of the executible or that the page derives from known Operations Manager page type."
I'm an admin user in OpsMgr, so this should not be a user privilege issue, and that leaves the MP itself. The fact that a 2.6.0.0 version is mentioned makes me wonder if the base version of the MP must be installed before the 2.6.2 version. I'd test this, but we no longer have that version, and its no longer available for download from Cisco that I can see.
Has any dealt with this issue successfully, or have any insight into the problem?Solved...the requirement is that you must do the MP configuration from the SCOM console on the SCOM Management Server where you installed the Cisco UCS MP; you can't do it from a SCOM console on a remote computer like I was trying to do.
-
Problem in the first run of "System Center 2012 R2 Operations Manager – Evaluation (VHD)"
Hi All,
I need to evaluate the "System Center 2012 R2 Operations Manager" so I downloaded the Evaluation VHD from this URL:
http://www.microsoft.com/en-us/download/details.aspx?id=40844
I downloaded all the 13x ISO images and used the supplied SC2012_R2_SCOM_EVALVHD.exe to
rebuild the VHD file. I am using Windows Server 2012 Standard.
As indicated by the install instructions, I used “OM2012R2_VHDEval.docx"
to create the Virtual Machine to run Operations Manager. Problems:
1) when I first connected to the Virtual Machine just created in Hyper-V, there was a cmd window saying that was impossible to connect to the domain I provided. i think the domain was correct. Is this error a showstopper or the Operation Manager should be
able to run anyway?
2) To run Operation Manager on the Virtual Machine, the install guide says "On the desktop of the virtual machine, double-click the
Operations Manager Console folder. Operations Manager Console
folder provides access to different parts of Operations Manager. Double-click
Operations Console to open the Operations Manager console."
so I did click on the Operation Console icon but it says the file does not exist in the Virtual Machine. How is that possible if this is a prepackaged Virtual Machine ready to use for evaluation? I checked the pointed folder and actually inside "c:\Program
Files" there is no System Center folder at all..?
Any help would be much appreciated, I'm kind of lost at the moment and not sure how to get started with this (to me) new software.
Thansk.
W.Hi All,
I need to evaluate the "System Center 2012 R2 Operations Manager" so I downloaded the Evaluation VHD from this URL:
http://www.microsoft.com/en-us/download/details.aspx?id=40844
I downloaded all the 13x ISO images and used the supplied SC2012_R2_SCOM_EVALVHD.exe to
rebuild the VHD file. I am using Windows Server 2012 Standard.
As indicated by the install instructions, I used “OM2012R2_VHDEval.docx" to create the Virtual Machine to run Operations Manager.
Problems:
1) when I first connected to the Virtual Machine just created in Hyper-V, there was a cmd window saying that was impossible to connect to the domain I provided. i think the domain was correct. Is this error a showstopper or the Operation Manager should be able
to run anyway?
2) To run Operation Manager on the Virtual Machine, the install guide says "On the desktop
of the virtual machine, double-click the Operations Manager Console folder.
Operations Manager Console folder
provides access to different parts of Operations Manager. Double-click Operations Console to
open the Operations Manager console." so I did click on the Operation Console
icon but it says the file does not exist in the Virtual Machine. How is that possible if this is a prepackaged Virtual Machine ready to use for evaluation? I checked the pointed folder and actually inside "c:\Program Files" there is no System Center
folder at all..?
Any help would be much appreciated, I'm kind of lost at the moment and not sure how to get started with this (to me) new software.
Thansk.
W.
Maybe you are looking for
-
How can you get the serial number of your ipod touch when it has been lost?
My daughter took her ipod touch to a friends house and it is now missing...can anyone tell me how to get the serial number so that we can report the missing device? Thanks to anyone who can help.....
-
HT1476 I see my ipod is chargeing but why is it chargein so slow
why do it take my ipod so slow 2 charge lol
-
DATABASE performance is very high
Hi, I'm having the following code. its performance is very high. Is it possible to reduce the processing time? SELECT objnr gjahr kstar beknz twaer wtg001 wtg002 wtg003 wtg004 wtg005 wtg006 wtg007 wtg008 wtg009 wtg010 wtg01
-
Using Bootcamp and Fusion on SEPARATE installations
So if I install Vista on bootcamp, and then install fusion as a new installation with another 32 gb of space, will it let me activate and use both of them? Basically I want to be able to use photoshop on vista so I can utilize the graphics card and f
-
How do I redownload Photoshop Elements after my computer has wiped?
My computer hide drive failed so it was wiped. I have the serial number of my photoshop elements and was wondering where I can go to redownload the software.