System Center DPM 2012 R2 Issue backing up Exchange 2010

I was previously using System Center DPM 2010 to back up an Exchange 2010 server without any issues. we recently upgraded to DPM 2012 R2 and I followed all of the steps to install it properly on the Exchange Server. However, DPM cannot see the Exchange DB correctly and it is not allowing it run the cleanup (eseutil.exe) on the Exchange Server, leading to space issues. What do I need to do to resolve this issue?
This topic first appeared in the Spiceworks Community

Hi,
This is a documentation error and will get it addressed. DPM 2012 R2 RTM does still support page file VHD exclusion same as DPM 2012 SP1.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

Similar Messages

Pagefile exclusion for VHDs is not functional System Center DPM 2012 R2

The Release Notes for Data Protection Manager in System Center 2012 R2 state that:
Pagefile exclusion for VHDs is not functional
Description: Pagefile exclusion for virtual hard disk files (VHDs) is not functional.
Workaround: None.
I feel silly asking this in the forums, but my mind just can't wrap around the fact that this feature (that was just recently added in DPM 2012 SP1) is broken in the new release of 2012 R2. Does anyone with actual knowledge of the product have any
additional info on this issue? Do we need to wait for a service pack to fix it or are there possibly ANY workarounds or situations where it might be used?
TIA

Hi,
This is a documentation error and will get it addressed. DPM 2012 R2 RTM does still support page file VHD exclusion same as DPM 2012 SP1.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

System Center Orchestrator 2012 Integration Pack for Lync Server 2013 release Date?

Hi,
I want to know about System Center Orchestrator 2012 Integration Pack for Lync Server 2013 release Date?
or Microsoft has already released it?
Amit Sharma

Hi,
I believe it will be around Q4. At the moment there isn't any updates on the release dates yet. So I suggest you to wait patiently.
Guowen Su
Cisco Certified Network Associate
Cisco Certified Internetwork professional - MPLS
Certified Information Systems Security Professional
Microsoft Partner Network 2011
Microsoft Certified Professional
Microsoft Certified Systems Administrator:Security
Microsoft Certified Systems Engineer: Security
Microsoft Certified Technology Specialist: Windows Server 2008 Active Directory, Configuration
Microsoft Certified Technology Specialist: Windows Server 2008 Network Infrastructure, Configuration
Microsoft Certified Technology Specialist: Windows Server 2008 Applications Infrastructure, Configuration
Microsoft Certified Technology Specialist: Windows 7, Configuring
Microsoft Certified IT Professional: Enterprise Administrator
Microsoft Certified IT Professional: Server Administrator
Certified Ethical Hacker
Computer Hacking Forensics Investigator
Certified Sonicwall Security Administrator
Microsoft Geeks

System center sql 2012 remote or local install

Guys I'm testing System Center 2012 R2 right now I plan on installing configuration manager for starters. I would like to ask you guys did you install your sql server instance locally for System Center or do you have a remote SQL server installation that
System Center is using are there any pros for installing a local instance over a remote one? Also I was reading somewhere that Sytem Center comes with an SQL server license I always assumed that it would come with SQL Server express and not full blown
SQL Server. So with that said does System Center incluse a full blown SQL Server license?

Hi,
In test environment, typically SQL can be on local instance. However in production environment, you can place SQL on remote as when collocated the site server supports a maximum of 50,000 Clients, and if database server is installed on
a Remote server, the Site-Server supports up to 100,000 Clients.
In System Center 2012, along with any edition of Server Management License you get a run-time instance of SQL Server Standard edition when utilized for the SQL engine used by the System Center components.
For further information about SQL Requirements:http://technet.microsoft.com/en-us/library/gg682077.aspx
About System Center Licensing:http://www.microsoft.com/licensing/about-licensing/SystemCenter2012-R2.aspx#tab=1
Regards, Manohar Pusala

Re-Syn Outlook folder back to Exchange 2010

Last week we had to do a full restore of our Exchange 2010 server using Windows Server Backup. Unfortunately the backup did not have a current backup of Applications (Exchange or SharePoint), which is a whole other issue. This restore was on Jan. 17th and
the most current backup that contained Exchange was Jan 6th. Needless to say we lost about 2 weeks of email on the server. However those emails did stay on all our in-house users PC's in their Outlook 2010.
My question is, how can I move those cached emails from their Outlook folder back over to the server? Some people do use OWA and it would be great if they could see those emails saved in Outlook.

Hi,
Please check whether you can view the missing messages in OWA. If the missing emails also cannot be viewed in OWA but only in Outlook, we can follow
Sunil _Kumar’s suggestion to export the missing emails to a .pst file from users’ PCs, then import it to users’ mailbox.
For your reference, here is an article about how to import PST Files into Mailboxes with Exchange 2010:
http://exchangeserverpro.com/exchange-2010-import-pst-files-mailboxes/
Thanks,
Winnie Liang
TechNet Community Support

Problem: Task completion sync back from Exchange 2010 to Project Server 2010

I have new installation of PS 2010 and Exchange 2010 (one server holds all roles including CAS).
For sync between PS and EX 2010, I following the technet article Configure Project Server 2010 to work with Exchange Server 2010 at http://technet.microsoft.com/en-us/library/ff468700%28office.14%29.aspx (yes I read the second part on Impersonation, too).
Basically I followed the video and opted for "Impersonation for all users".
I got tasks appear in resources outlook "Tasks" folder no problem. They appeared instantly after project is published. But when the resource update the completion in outlook, it failed to update the Project server.
The applog on Exchange server has the following events:
A notification for subscription [IABmaWxiZXJ0Lm1zYy5hbHR1cmFzYW5hbHl0aWNzLmNvbRAAAABpsVspLo+TSpth0iMukr+TjiFq73wS0Qg=] against endpoint [http://MyPSserver/PWA/_vti_bin/PSI/ExchangeSync.asmx] couldn't be sent. (Send attempts: 2) Details: WebException:
The remote server returned an error: (500) Internal Server Error. StatusCode: InternalServerError Internal Server Error    at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at Microsoft.Exchange.Services.Core.NotificationServiceClient.HandleResponse(IAsyncResult responseAsyncResult)
After 8 unsuccessful attempts to send a notification for subscription [IABmaWxiZXJ0Lm1zYy5hbHR1cmFzYW5hbHl0aWNzLmNvbRAAAABaEEJ+4ahFSY6IVGcSZ7/m4kLgKCES0Qg=] against endpoint [http://MyPSserver/PWA/_vti_bin/PSI/ExchangeSync.asmx], the subscription has
been removed. Details: WebException: The remote server returned an error: (500) Internal Server Error. StatusCode: InternalServerError Internal Server Error    at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at Microsoft.Exchange.Services.Core.NotificationServiceClient.HandleResponse(IAsyncResult responseAsyncResult
The W3C log on PS app server has the following related entries (401 and 500 errors. 10.0.0.76 is Exch server. 10.0.0.77 is the PS app server):
2014-03-20 18:12:39 10.0.0.77 POST /PWA/_vti_bin/PSI/ExchangeSync.asmx - 80 - 10.0.0.76 - 401 2 5 0
2014-03-20 18:12:39 10.0.0.77 POST /PWA/_vti_bin/PSI/ExchangeSync.asmx - 80 - 10.0.0.76 - 401 1 2148074254 15
2014-03-20 18:12:39 10.0.0.77 POST /_vti_bin/PSI/ExchangeSync.asmx - 80 MyDomain\MyExchServer$ 10.0.0.76 - 500 0 0 31
2014-03-20 18:12:39 10.0.0.77 POST /PWA/_vti_bin/PSI/ExchangeSync.asmx - 80 - 10.0.0.76 - 401 2 5 0
2014-03-20 18:12:39 10.0.0.77 POST /PWA/_vti_bin/PSI/ExchangeSync.asmx - 80 - 10.0.0.76 - 401 1 2148074254 0
2014-03-20 18:12:39 10.0.0.77 POST /_vti_bin/PSI/ExchangeSync.asmx - 80 MyDomain\MyExchServer$ 10.0.0.76 - 500 0 0 31
2014-03-20 18:12:39 10.0.0.77 POST /PWA/_vti_bin/PSI/ExchangeSync.asmx - 80 - 10.0.0.76 - 401 2 5 0
2014-03-20 18:12:39 10.0.0.77 POST /PWA/_vti_bin/PSI/ExchangeSync.asmx - 80 - 10.0.0.76 - 401 1 2148074254 0
2014-03-20 18:12:39 10.0.0.77 POST /_vti_bin/PSI/ExchangeSync.asmx - 80 MyDomain\MyExchServer$ 10.0.0.76 - 500 0 0 31
2014-03-20 18:12:41 10.0.0.77 POST /PWA/_vti_bin/PSI/ExchangeSync.asmx - 80 - 10.0.0.76 - 401 2 5 0
2014-03-20 18:12:41 10.0.0.77 POST /PWA/_vti_bin/PSI/ExchangeSync.asmx - 80 - 10.0.0.76 - 401 1 2148074254 0
2014-03-20 18:12:41 10.0.0.77 POST /_vti_bin/PSI/ExchangeSync.asmx - 80 MyDomain\MyExchServer$ 10.0.0.76 - 500 0 0 62
2014-03-20 18:28:39 10.0.0.77 POST /PWA/_vti_bin/PSI/ExchangeSync.asmx - 80 - 10.0.0.76 - 401 2 5 15
2014-03-20 18:28:39 10.0.0.77 POST /PWA/_vti_bin/PSI/ExchangeSync.asmx - 80 - 10.0.0.76 - 401 1 2148074254 0
2014-03-20 18:28:39 10.0.0.77 POST /_vti_bin/PSI/ExchangeSync.asmx - 80 MyDomain\MyExchServer$ 10.0.0.76 - 500 0 0 46
2014-03-20 18:28:39 10.0.0.77 POST /PWA/_vti_bin/PSI/ExchangeSync.asmx - 80 - 10.0.0.76 - 401 2 5 15
2014-03-20 18:28:39 10.0.0.77 POST /PWA/_vti_bin/PSI/ExchangeSync.asmx - 80 - 10.0.0.76 - 401 1 2148074254 0
2014-03-20 18:28:39 10.0.0.77 POST /_vti_bin/PSI/ExchangeSync.asmx - 80 MyDomain\MyExchServer$ 10.0.0.76 - 500 0 0 31
2014-03-20 18:28:39 10.0.0.77 POST /PWA/_vti_bin/PSI/ExchangeSync.asmx - 80 - 10.0.0.76 - 401 2 5 0
2014-03-20 18:28:39 10.0.0.77 POST /PWA/_vti_bin/PSI/ExchangeSync.asmx - 80 - 10.0.0.76 - 401 1 2148074254 0
2014-03-20 18:28:39 10.0.0.77 POST /_vti_bin/PSI/ExchangeSync.asmx - 80 MyDomain\MyExchServer$ 10.0.0.76 - 500 0 0 15
2014-03-20 18:28:41 10.0.0.77 POST /PWA/_vti_bin/PSI/ExchangeSync.asmx - 80 - 10.0.0.76 - 401 2 5 15
2014-03-20 18:28:41 10.0.0.77 POST /PWA/_vti_bin/PSI/ExchangeSync.asmx - 80 - 10.0.0.76 - 401 1 2148074254 0
2014-03-20 18:28:41 10.0.0.77 POST /_vti_bin/PSI/ExchangeSync.asmx - 80 MyDomain\MyExchServer$ 10.0.0.76 - 500 0 0 15
I am new to PS 2010. Help is appreciated. Thanks.

Here are the errors found in Project Queues:
ExchangeSyncExchangeSubscriptionUpdateForUserFailed (40511). Details: id='40511' name='ExchangeSyncExchangeSubscriptionUpdateForUserFailed' uid='ef501cc2-9305-47b5-92b3-021e3b41d1b5' teamMemberUid='b8f2e0cd-9882-4677-be61-b2780b32bae5' exception='System.NullReferenceException:
Object reference not set to an instance of an object. at Microsoft.Office.Project.Server.ExchangeSync.ExchangeSyncUtil.UpdateExchangeSubscription(Guid resourceUid, SubscriptionContext context) at Microsoft.Office.Project.Server.ExchangeSync.ExchangeSyncUtil.UpdateExchangeSubscription(Guid
resourceUid) at Microsoft.Office.Project.Server.ExchangeSync.ExchangeSubscriptionRefreshProcessor.Refresh(PlatformContext ctx)'.
ReportingProjectChangeMessageFailed (24006) - The INSERT statement conflicted with the FOREIGN KEY constraint "FK_MSP_EpmAssignment_ResourceOwnerUID". The conflict occurred in database "ProjectServer_Reporting", table "dbo.MSP_EpmResource", column 'ResourceUID'.
The statement has been terminated.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='ef4e51a1-8cb2-4ec2-bfc4-530f1f34cd8c' QueueMessageBody='Project UID='2668bb26-5c23-42ce-843a-fa49feadba05'. PublishType='ProjectPublish'' Error='The INSERT
statement conflicted with the FOREIGN KEY constraint "FK_MSP_EpmAssignment_ResourceOwnerUID". The conflict occurred in database "ProjectServer_Reporting", table "dbo.MSP_EpmResource", column 'ResourceUID'. The statement has been terminated.'.
ReportingProjectChangeMessageFailed (24006) - The INSERT statement conflicted with the FOREIGN KEY constraint "FK_MSP_EpmAssignment_ResourceOwnerUID". The conflict occurred in database "ProjectServer_Reporting", table "dbo.MSP_EpmResource", column 'ResourceUID'.
The statement has been terminated.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='0b88178b-2e45-41af-a85f-8c5590e9c3e7' QueueMessageBody='Project UID='2668bb26-5c23-42ce-843a-fa49feadba05'. PublishType='ProjectPublish'' Error='The INSERT
statement conflicted with the FOREIGN KEY constraint "FK_MSP_EpmAssignment_ResourceOwnerUID". The conflict occurred in database "ProjectServer_Reporting", table "dbo.MSP_EpmResource", column 'ResourceUID'. The statement has been terminated.'.
ReportingProjectChangeMessageFailed (24006) - The INSERT statement conflicted with the FOREIGN KEY constraint "FK_MSP_EpmAssignment_ResourceOwnerUID". The conflict occurred in database "ProjectServer_Reporting", table "dbo.MSP_EpmResource", column 'ResourceUID'.
The statement has been terminated.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='0d7421f6-2579-4656-b956-d50ecc7f5f1c' QueueMessageBody='Project UID='2668bb26-5c23-42ce-843a-fa49feadba05'. PublishType='ProjectPublish'' Error='The INSERT
statement conflicted with the FOREIGN KEY constraint "FK_MSP_EpmAssignment_ResourceOwnerUID". The conflict occurred in database "ProjectServer_Reporting", table "dbo.MSP_EpmResource", column 'ResourceUID'. The statement has been terminated.'.
ReportingProjectChangeMessageFailed (24006) - The INSERT statement conflicted with the FOREIGN KEY constraint "FK_MSP_EpmAssignment_ResourceOwnerUID". The conflict occurred in database "ProjectServer_Reporting", table "dbo.MSP_EpmResource", column 'ResourceUID'.
The statement has been terminated.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='3456b70e-fe16-4b3a-ab66-f2a5237fbaeb' QueueMessageBody='Project UID='2668bb26-5c23-42ce-843a-fa49feadba05'. PublishType='ProjectPublish'' Error='The INSERT
statement conflicted with the FOREIGN KEY constraint "FK_MSP_EpmAssignment_ResourceOwnerUID". The conflict occurred in database "ProjectServer_Reporting", table "dbo.MSP_EpmResource", column 'ResourceUID'. The statement has been terminated.'.
ReportingProjectChangeMessageFailed (24006) - The INSERT statement conflicted with the FOREIGN KEY constraint "FK_MSP_EpmAssignment_ResourceOwnerUID". The conflict occurred in database "ProjectServer_Reporting", table "dbo.MSP_EpmResource", column 'ResourceUID'.
The statement has been terminated.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='fc78474a-bf5c-422c-a209-cb79e3201e38' QueueMessageBody='Project UID='2668bb26-5c23-42ce-843a-fa49feadba05'. PublishType='ProjectPublish'' Error='The INSERT
statement conflicted with the FOREIGN KEY constraint "FK_MSP_EpmAssignment_ResourceOwnerUID". The conflict occurred in database "ProjectServer_Reporting", table "dbo.MSP_EpmResource", column 'ResourceUID'. The statement has been terminated.'.
ReportingProjectChangeMessageFailed (24006) - The INSERT statement conflicted with the FOREIGN KEY constraint "FK_MSP_EpmAssignment_ResourceOwnerUID". The conflict occurred in database "ProjectServer_Reporting", table "dbo.MSP_EpmResource", column 'ResourceUID'.
The statement has been terminated.. Details: id='24006' name='ReportingProjectChangeMessageFailed' uid='d2f4b313-0c21-4a2c-b8a7-f6bd7aef13fe' QueueMessageBody='Project UID='2668bb26-5c23-42ce-843a-fa49feadba05'. PublishType='ProjectPublish'' Error='The INSERT
statement conflicted with the FOREIGN KEY constraint "FK_MSP_EpmAssignment_ResourceOwnerUID". The conflict occurred in database "ProjectServer_Reporting", table "dbo.MSP_EpmResource", column 'ResourceUID'. The statement has been terminated.

Secondary DPM (2012 R2) Issues: synchronising too much data from Primary DPM, persistant consistancy checks, and no dedup support!

I have a Primary DPM server that is protecting various File servers and a Exchange DAG. Everything is working as it should on this server, but I am experiencing constant issues on the secondary DPM protecting these same data sources.
On the primary, two Protection Groups in particular are set up to protect two different volumes on the same file server. Volume D:\ is 46TB in size, with a deduplicated file size of 22TB (actual 39TB) whilst Volume E:\ is 25 TB in size, with a deduplicated
file size of 2.5TB (actual 5.5TB).
Issue 1:
As expected Volume D: was initially replicated to the secondary DPM server at its undeduplicated size ( 39TB), as was Volume E:\ with initial replication to the secondary of 5.5 TB. So when is Microsoft going to support dedup on a secondary DPM ? It
seems daft to support dedup on the Primary DPM which is always more likely to be close to the original datasources on the LAN and not on the secondary DPM which is most likely to be placed offsite on a WAN !
Issue 2:
I have a big issue with the subsequent Synchronizations on the secondary server for E: which seems to transfer almost the full 5.5 TB every day ( I have it set to sync every 24hrs) - although the data is fairly static (i.e.unchanging) on that volume. On
one occasion a Sync continued for over 48 hours for this volume and had transferred over 20GB (according to the DPM console) , until I manually cancelled the job - how is that possible on a volume with only 5.5 TB (UN-deduplicated) ?? What is going on here
- has anyone any ideas?
Issue 3:
Another File server I am protecting on both the Primary & Secondary DPM server - always fails over to a consistency check on the secondary server - usually due to the fact it cannot access a particular file which results in an inconsistent replica .
However the Sync (and subsequent restore point) on the primary DPM server from the original datasource is always completes without any issues. Again, has anyone any clues ?
I do get the impression that the whole Secondary DPM thing is not quite robust enough. I can only assume that as the Primary seems to protect the original datasources ok, that the issue is with the secondary reading the information on the primary DPM.

I tried changing the time of the synchronization, but that didn't help.
Meanwhile, I was working on another unrelated case with Microsoft and so I didn't want to have a second case open at the same time. So I waited for some weeks with no change on this problem. Then, about a day or two before I was finally going to call Microsoft
to open a case (months after the problem had started), the problem suddenly resolved itself, with no input from me! So I don't really know if it was time that fixed it eventually or what. Sorry I can't be of more help.
Rob

Rollup Package 7 for System Center DPM 2010- cumulative

Hi,
is this update cumulative or i need to install all previous updates?

Hi,
yes ist cumulative, but read the Installation Instructions here:
http://support.microsoft.com/kb/2751231
you Need to install some hotfixes.
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

System Center Orchestrator 2012 R2 Runbook needed to monitor multiple folders

I've written script that will scan ~25 folders and pick the folder(s) with files in it and spit out the path for one of those folders. I then want to monitor the folder wait for the folder to empty then the script should rerun and spit out
the next folder that contains files and so on. Lastly when all folders are empty the script should return NULL or something like that so I can tell the RB to quit.
The problem with the monitor folder object is that you cant link an object before it.
Ideas? I thought about running the script in another RB and calling the monitor RB but don't know how to pass values (folder path that contains files) to the monitor folder object. Also, I want the RB to only run when I trigger is and stop when all
folders are empty.
Thanks!

Hi,
use the "Get File Status" Activity within a Runbook.
Configure a Loop until "File exists equals false":
http://technet.microsoft.com/en-us/library/hh403826.aspx
The "Monitor" Activities can only be the first Activity in a Runbook.
Regards,
Stefan
www.sc-orchestrator.eu ,
Blog sc-orchestrator.eu

Calendar Issues with ActiveSync Exchange 2010 14.1.438 to iPhone IOS 6.1.4

The iPhone is missing some new calendar meetings and appointments. It is so random, some of them are meeting request I accepted and some of them are appointment I made on Outlook 2010. I see them on Outlook 2010 and OWA. If I delete the meeting or
appointment from Outlook and then put it back; it shows up on my iPhone. It also sync if I delete the syncing of the calendar to the iPhone and put then add it back on.

Hello,
Please refer to the following article to troubleshoot your issue.
http://blogs.technet.com/b/exchange/archive/2010/07/01/3410271.aspx
http://support.microsoft.com/kb/2563324
If the issue persists, please collect some logs.
http://blogs.technet.com/b/exchange/archive/2012/01/31/a-script-to-troubleshoot-issues-with-exchange-activesync.aspx
Cara Chen
TechNet Community Support

Mailbox Move Issues and Errors - Exchange 2010 to 2013

I'm trying to move mailboxes from 2010 to 2013, but I'm experiencing a lot of issues.
My move batches keep hanging (stalled) for minutes and hours on end, and I can't seem to keep them going consistently.
I have two DAG's, one for Archive boxes, and one for Primary mailboxes. Each DAG has three members with DB copies of each DB. The npdes and the clusters themselves are up and healthy. However, at random some of the DB's Content Index state will go to Failed
or SuspendedandFailed. At which point I force a catalog refresh and DB index update, and it goes to healthy.
I've created the "ContentSubmitters" AD group (and assigned it permissions), reset the Search and Host controller services on each server, and restarted the Replication service. I also deleted and recreated the Index for each DB prior to restarting
services. No dice. I've also already moved the system mailboxes over to the 2013 databases.
I'm also getting some "Transient" errors in the user move log, things like this:
Transient error ResourceUnhealthyException has occurred. The system will retry"
5/4/2014 8:43:55 AM [exmb1] The job encountered too many transient failures (60) and is quitting.
5/4/2014 8:43:55 AM [exmb1] Fatal error ResourceUnhealthyException has occurred.
Error: MigrationPermanentException: Warning: Target mailbox unlock operation was not replicated. If a lossy failover occurs after the target mailbox was unlocked, the target mailbox could remain inaccessible. Error details: The store ID provided isn‎'t an ID of an item. --> MapiExceptionNetworkError: Unable to open entry ID. ‎(hr=0x80040115, ec=0)‎ Diagnostic context: Lid: 45025 Lid: 45345 StoreEc: 0x80040115 Lid: 22894 Lid: 24942 StoreEc: 0x80040115
Any ideas would be appreciated!!!

Hi
I would suggest you to run the below command for this "My move batches keep hanging (stalled) for minutes and hours on end" issue and see the result
Get-MoveRequest -Identity "Mailbox Name" | Get-MoveRequestStatistics -IncludeReport | FL Report
Just check if the MRS health is fine by running the below command
Test-MRSHealth -Identity "CAS Server" -MonitoringContext $true | Export-CliXml "C:\temp\CAS_MRSHealth.xml" and look at the xml file to get more information
When I run the Test command against either of my CAS servers, I get: " 'EXCH1' does not have the right Exchange Server version or role required to support this operation."
Run i run that command against any of the mailbox servers, it completes and generates the XML file, but I'm not sure what I need to be looking for within that file.
The first command spits out a ton of data, here's a little excerpt:
5/5/2014 8:59:28 AM [exmb1] Transient error ResourceUnhealthyException has occurred. The system will retry
(2/60).
5/5/2014 9:00:02 AM [exmb1] The Microsoft Exchange Mailbox Replication service 'exmb1.contoso.com'
(15.0.847.31 caps:03FF) is examining the request.
5/5/2014 9:00:07 AM [exmb1] Connected to target mailbox 'Primary (072dc240-bd79-495c-b7f2-c571e8f910f2)',
database 'newmbi', Mailbox server 'Exmb1.contoso.com' Version 15.0 (Build 847.0).
5/5/2014 9:00:07 AM [exmb1] Connected to target mailbox 'Archive (812ee554-4a1e-4feb-b591-a435fcbdee16)',
database 'newarci', Mailbox server 'EXARC2.contoso.com' Version 15.0 (Build 847.0), proxy server
'EXARC2.contoso.com' 15.0.847.31 caps:1FFFCB07FFFF.
5/5/2014 9:00:07 AM [exmb1] Connected to source mailbox 'Primary (072dc240-bd79-495c-b7f2-c571e8f910f2)',
database 'exmbi', Mailbox server 'Chsexmb2.contoso.com' Version 14.3 (Build 181.0).
5/5/2014 9:00:08 AM [exmb1] Connected to source mailbox 'Archive (812ee554-4a1e-4feb-b591-a435fcbdee16)',
database 'Exarci', Mailbox server 'CHSEXARC1.contoso.com' Version 14.3 (Build 181.0)
5/5/2014 9:00:12 AM [exmb1] Request processing continued, stage LoadingMessages.
5/5/2014 9:00:36 AM [exmb1] Messages have been enumerated successfully. 6657 items loaded. Total size:
332.3 MB (348,411,982 bytes).5/5/2014 9:06:14 AM [exmb1] The long-running job has been temporarily postponed. It will be picked up
again when resources become available.

Issue while installing Exchange 2010 SP3 in SBS 2011

I tried installing the SP3 on my SBS 2011 box but it asked for a Hotfix from KB2550886 to be installed. When I tried to install the Hotfix it said that it does not apply to my SBS 2011 box and did not install. However I went ahead with the installation
of SP3 but it stopped just before the final action. Thereafter I was unable to access my Exchange and in services the Microsoft Exchange Transport service kept on stopping despite starting it manually. Spent more than a day trying
to resolve the issue but when nothing came forward I had to rebuild my server (you may disagree with this step but I had no other solution) over the weekend.
I tried installing the SP3 but again it asked for the Hotfix. I have not proceeded with the installation of SP3 but have installed the SP 2 which I had preserved.
MS Exchange Best Practices Analyzer shows "Exchange store does not start". However when I follow the information in KB285116 I observe that everything is in order.
I would like to know the experience of other persons in this forum before I start the installation of SP3 once again.
Thanking you in advance.
Regards, Rajiv K Khandelwal

Hi,
After stopping the AV program services I tried installing but landed with the following problem:
Connecting to "SERVER.domain.local"
Logging in as current user using SSPI
Importing directory from file "C:\Windows\Temp\ExchangeSetup\Setup\Data\PostExchange2003_schema0.ldf"
Loading entries
1: CN=ms-Exch-ELC-Expiry-Action,CN=Schema,CN=Configuration,DC=DOMAIN,DC=local
Entry DN: CN=ms-Exch-ELC-Expiry-Action,CN=Schema,CN=Configuration,DC=DOMAIN,DC=local
Add error on entry starting on line 1: Operations Error
The server side error is: 0x21a2 The FSMO role ownership could not be verified because its directory partition has not replicated successfully with at least one replication partner.
The extended server error is:
000021A2: SvcErr: DSID-030A0AE6, problem 5012 (DIR_ERROR), data 8610
0 entries modified successfully.
An error has occurred in the program
I tried the solution as provided in
http://social.technet.microsoft.com/Forums/exchange/en-US/de047852-fa94-4327-b518-94d6b25b1101/schema-error but did not succeed.
I am wondering whether to leave the thing as it is.
Regards, Rajiv K Khandelwal

SC DPM 2012 Health check

Hi All,
I have System center DPM 2012 which takes backup of Exchange 2010, File server, VM's and system state for physical servers. I want to perform health check on DPM. Kindly recommend any tool or report format and how to perform health check ?

The only thing i know is the Configuration Analyzer from MS: http://technet.microsoft.com/en-us/library/jj992580.aspx
All other things can be done with PowerShell Scripts:
Browse Gallery: http://gallery.technet.microsoft.com/site/search?f%5B0%5D.Type=RootCategory&f%5B0%5D.Value=SystemCenter&f%5B0%5D.Text=System%20Center&f%5B1%5D.Type=SubCategory&f%5B1%5D.Value=protection&f%5B1%5D.Text=Data%20Protection%20Manager
Or: http://www.techguy.at/scdpm/
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat

DpmBackup.exe -db in DPM 2012 R2 Fails To Back Up

I have a new installation of System Center DPM 2012 R2 with the most recent updates installed. When I try to back up the SQL Server 2012 database, I get this error: "Error: Backup failed for Server 'MyServer'." The command I'm using
is:
dpmbackup.exe -db -sqlServerName MyServer -instanceName "(LOCAL)" -dpmdbname DPMDB_MyServer. The SQL server instance name is the default MSSQLSERVER and the database name is DPMDB_MyServer.
The firewall is turned off but before that I checked that TCP/IP was set to allow port 1433.I can back up the database using SQL Server Management Studio so it's looks like a permissions problem somewhere. I have another test server configured the same way and
it too gives the error message. Any ideas what's causing this?
After reviewing the Event Viewer, Windows Logs, Application, I find this error (partial listing):
</ExceptionMessage><ExceptionDetails>Microsoft.SqlServer.Management.Smo.FailedOperationException: Backup failed for Server 'MyServer'.
---> Microsoft.SqlServer.Management.Common.ExecutionFailureException: An exception occurred while executing a Transact-SQL statement or batch. ---> System.Data.SqlClient.SqlException: Cannot open backup device 'c:\users\joe\desktop\dpmdb_myserverl.bak'.
Operating system error 5(Access is denied.).
BACKUP DATABASE is terminating abnormally.
What is Operating System Error 5 (access denied)?
Okay, I figured it out that SQL didn't have permission to write to any folders other than it's own folder system. So this command worked successfully:
PS C:\Program Files\Microsoft System Center 2012 R2\DPM\DPM\bin> dpmbackup.exe -
db -sqlServerName MyServer -instanceName "(LOCAL)" -dpmdbname DPMDB_MYSERVER -targ
etLocation "C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA"

hi
If you create a network share with the correct permissions does it work? You getting an access denied error.
I see you say the bottom command worked. Is your question resolved or do you need help still?

Tape Consumption/Utilization on System Center Data Protection Manager 2012

Hi Guys,
I have setup System Center DPM 2012 for Exchange 2010 Backup, the tape library that i am using is Dell TL4000 with 45 Slots and two LTO 5 Drives. The total size of Exchange backup is 33 TB but the no. of tapes used to backup are 16 LTO5 tapes.
The native capacity of LTO5 tape is 1.5 TB and the compressed capacity is 3 TB.
The total no. of tapes used for exchange backup are 16 therefore 16 Tapes x 3 TB = 48 TB where as the total backup size of exchange is 33 TB which means there is a complete wastage of 15 TB tape storage.
Does any one know if its a known issue on DPM? Is there a way where i can tweak the tape utilization? Any help will be much appreciated.
Thanks in advance!
Sajeel

Hi,
The LTO5 compression ratio is usually an average of 2:1 depending on the data being written. Some data is not compressible like .jpg .bmp etc. so it's not predictable ahead of time how much data will fill a tape. The fact
that you are achieving greater than native capacity shows that compression is enabled and working.
Besides the data not compressing as much as you like, the only other explanation for not getting more data on a tape is it may not be filling before we either get an EOM from the drive, or we get an IO error that DPM is going to convert to an EOM.
To see if it is the latter check the DPMRA Errlogs for the error code 0x8007045D.
Open an Administrative command prompt.
CD C:\Program file\Microsoft System Center 2012\DPM\DPM\Temp
Find /I "0x8007045D" DPMRA*.Errlog >C:\temp\DPMRA0x8007045D.TXT
Notepad C:\temp\DPMRA0x8007045D.TXT
If you find any, add the registry settings for BufferQueueSize and BusyRetryCount using the following
BLOG.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

System Center DPM 2012 R2 Issue backing up Exchange 2010

Similar Messages

Maybe you are looking for