System center with Operations manager
hi all,
I want to integrate SCOM with SCCM 2012 for the Monitoring purposes.
Can anyone help me with the procedure to workon.
I am a layman with the cross platforms.
Thanks in advance.
regards,
surya
surya
Surya,
Your best bet is to post your questions over on the Orchestrator forums -->
http://social.technet.microsoft.com/Forums/en-US/home?category=systemcenterorchestrator as they will be able to give you better guidance.
Regards,
-Steve
Similar Messages
-
Enabling Instant Messaging Notifications in System Center 2012 Operations Manager
Hello
I need your assistance please...
I followed the steps here
http://opsmgrunleashed.wordpress.com/2012/02/24/enabling-instant-messaging-notifications-in-system-center-2012-operations-manager/ to enable IM notification.
I received error in opsmgr console "Failed to send notification" the alert state (Microsoft.Rtc.Signaling.ConnectionFailureException: Unable to establish a
connection) while on the lync server I see critical event ID: 36888 (
A fatal alert was generated and sent to the remote endpoint. This may result in termination of the connection. The TLS protocol defined fatal error code is 10. The Windows SChannel error state is 1203.)
Appreciate your help.
Thanks
Mohammad, IT NOC TeamHi,
Please checked the setting of the IM channel, ensure the Protocol is TLS and port is 5061.
Also try to create the following registry key for a test. If the issue persists, check the event log from SCOM side.
New Key: SHA
Path: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\SecurityProviders\SCHANNEL\Hashes\SHA
SubKey: Enabled
Value: Dword:00000000
Niki Han
TechNet Community Support -
Why buy System Center 2012 Operations Manager (how to convince my boss)
Hello
I need to put together a document to try and convince my boss to spend the time/money to move from SCOM 2007 R2 to SCOM 2012 R2.
One of the areas I want to focus on is Cross Platform (Unix/Linux), Network Monitoring and APM
Does any one know of any good documents/short videos showing the benefits of SCOM 2012 R2 which a view to selling the benefits to a line manager (also have a very sceptical Unix/Linux team).
Perhaps someone else has already been through this loop, and has such a documents :)
Thanks
AAnotherUser__
AAnotherUser__Hi AAnotherUser:
Here is a recent video on managing SUSU Linux with SCOM 2012 R2:
http://www.bing.com/videos/search?q=video+system+Center+operations+manager+Linux&qs=n&form=QBVR&pq=video+system+center+operations+manager+linux&sc=0-0&sp=-1&sk=#view=detail&mid=F6243978D517D71C1A74F6243978D517D71C1A74
I can assure you this level of ease of monitoring applies to all supported Linux versions not such SUSE.
This video focuses on the dashboarding features in SCOM, it might convey the value you are looking for:
http://www.bing.com/videos/search?pq=video+value+of+system+center+operations+manager&sc=0-15&sp=-1&sk=&q=video+value+of+system+center+operations+manager&qft=+filterui:videoage-lt525600&FORM=R5VR8
Here is an official white paper from Microsoft on the value of System Center 2012 R2:
http://download.microsoft.com/download/7/7/2/7721670F-DEF0-40D3-9771-43146DED5132/System_Center_2012%20R2_Overview_White_Paper.pdf
Good luck,
John Joyner MVP-SC-CDM -
System Center 2012 Operations Manager - Which do I need Datacenter or Standard license
We are monitoring around 1,400 SQL, Sharepoint, and BizTalk servers with about 30% of them being VM. All of our SCOM infrastructure servers will be VM (4 MS servers, 1 Reporting server, 1 Web server), with the exception of the DB servers being
physical.
What I need to know is; do we need the Standard license or the Datacenter license?
Standard "permits management of up to two virtual OSEs." What does this statement apply to: target servers with agents or servers in the management group? Does this mean the standard license can be used for each target server that
is physical or only has two or fewer VMs?
ThanksWe are monitoring around 1,400 SQL, Sharepoint, and BizTalk servers with about 30% of them being VM. All of our SCOM infrastructure servers will be VM (4 MS servers, 1 Reporting server, 1 Web server), with the exception of the DB servers being
physical.
What I need to know is; do we need the Standard license or the Datacenter license?
Standard "permits management of up to two virtual OSEs." What does this statement apply to: target servers with agents or servers in the management group? Does this mean the standard license can be used for each target server that
is physical or only has two or fewer VMs?
Thanks
Ends up this was a misunderstanding of how licensing works. I assumed it applied to the management servers, but as it turns out, licenses are not required for management servers.
The "Microsoft Volume Licensing Service Center" website added to the confusion since it lists Datacenter as a separate download from Standard. With this, I assumed that I needed
to determine up front which version will be used when installing SCOM and the agents. This was not correct since the download ends up being the same binary.
In the end, as Jonathan mentioned, this was strictly a licensing issue which will be handled by our purchasing department.
Thank you to everyone for your responses. -
Our test environment is quite simple one Operations Server 2012 R2; with the database and SSRS instance on another server; Service Manager 2012 is on it’s own virtual machine; and the Service Manager Data Warehouse on it’s own. I’ve been trying to demo chargeback
with scvmm and I’m having issues with the chargeback reporting.
I’ve followed this process to install chargeback reports:http://technet.microsoft.com/en-us/library/jj614406.aspx which
completed successfully. All of the cubes seem to process correctly in Service Manager and I can create a chargeback analysis excel sheet with no issues in service manager. I still do not get any chargeback reports in the Operations console though. I get some
reports under the “Microsoft System Center Virtual Machine Manager 2012 R2 Reports” heading like Capacity, Host Group Forecasting, Host Utilization, etc but no chargeback report.
I can see the chargeback report in the SSRS website but cannot get it to appear in the Operations console. If anyone has any tips or troubleshooting they can point me at I would appreciate it.Hi,
Hope the below link could be helpful:
Enabling Chargeback in a Service Provider Cloud by Kristian Nese
http://blogs.technet.com/b/privatecloud/archive/2013/04/12/enabling-chargeback-in-a-service-provider-cloud-by-kristian-nese.aspx
Regards,
Yan Li
Regards, Yan Li -
I uninstalled all System Center VVM related management Packs, but still received "Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again.".
Think I got them all. But how can I figure out which Management pack is still installed and has to be removed.
Thanks for your replyGot following logging about this problem.
9/20/2013 9:35:09 AM] * Exception : => Microsoft.EnterpriseManagement.Common.MonitoringException: This method from the System Center Operations Manager 2007 R2 SDK is not supported to work with System Center Operations Manager 2012. Please migrate
to the System Center Operations Manager 2012 SDK.
at Microsoft.EnterpriseManagement.DataAbstractionLayer.SdkDataAbstractionLayer.HandleIndigoExceptions(Exception ex)
at Microsoft.EnterpriseManagement.DataAbstractionLayer.TypeSpaceOperations.ImportManagementPack(String managementPackXml, String keyToken, ManagementGroup managementGroup)
at Microsoft.EnterpriseManagement.ManagementGroup.ImportManagementPack(ManagementPack managementPack)
at Microsoft.VirtualManager.Setup.Wizard.Configurator.ImportManagementPacks()
[9/20/2013 9:35:09 AM] * Exception : => Setup encountered an error while importing management packs.Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management
packs.Microsoft.VirtualManager.Utils.CarmineException: Setup encountered an error while importing management packs.
Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management packs.
at Microsoft.VirtualManager.Setup.Wizard.Configurator.ImportManagementPacks()
at Microsoft.VirtualManager.Setup.Wizard.BackEnd.PreConfigureClientForOpsMgr()
*** Carmine error was: ManagementPackPresent (10208)
[9/20/2013 9:35:09 AM] * Exception : => Setup encountered an error while importing management packs.Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management
packs.Microsoft.VirtualManager.Setup.Exceptions.BackEndErrorException: Setup encountered an error while importing management packs.
Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management packs. ---> Microsoft.VirtualManager.Utils.CarmineException: Setup encountered an error while importing management
packs.
Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management packs.
at Microsoft.VirtualManager.Setup.Wizard.Configurator.ImportManagementPacks()
at Microsoft.VirtualManager.Setup.Wizard.BackEnd.PreConfigureClientForOpsMgr()
*** Carmine error was: ManagementPackPresent (10208)
--- End of inner exception stack trace ---
at Microsoft.VirtualManager.Setup.Wizard.BackEnd.PreConfigureClientForOpsMgr()
at Microsoft.VirtualManager.Setup.Wizard.VMInstaller.PreConfigure()
at Microsoft.VirtualManager.Setup.Wizard.ProgressPage.InstallVm()
at Microsoft.VirtualManager.Setup.Wizard.ProgressPage.InstallerThreadEntry()
*** Carmine error was: ManagementPackPresent (10208)
[9/20/2013 9:35:09 AM] *** Error : Setup encountered an error while importing management packs.
Uninstall all management packs related to System Center Virtual Machine Manager and then run Setup again. Setup will import the required management packs.
ID: 10208
[9/20/2013 9:35:10 AM] Information : Virtual Machine Manager Administrator Console installation has failed. -
Configuration issue on two items for system center 2012 config manager
My first issue was at the beginning of the install trying to extend the AD schema for system center 2012 config manager version 7.5.1561.0. The
path is missing for SMSSetup\Bin\x64\ to execute
Extadsch.exe is not on my disc. There is only a x86 and 64 bit folder with no bin.
Second issue when creating configuration manager connector. Error connecting to the database. So i went to my sqlserver and checked the permissions on the account I did notice that there are no smsdbrole_extract role permissions. Did I miss a step somewhere
along the way? On a side not that this is an instance and not under the default place. Also, i am using sql 2008 R2 version.OK, nothing wrong with that per se, but it has nothing to do with ConfigMgr. Also, ConfigMgr is not a "module", it's a distinct product unto itself with its own unique requirements and dependencies that is also architecturally completely different. So,
there's nothing to uninstall to install ConfigMgr. Also, I hope you're not trying to install these products on the same server. That is OK for a small lab environment, but nothing more. Even then, I wouldn't do it since its never something you'd do in production.
As mentioned, each product has its own unique dependencies with no true overlap.
Jason | http://blog.configmgrftw.com -
How to enable microsoft system center virtual machine manager Management Pack IP Pool monitoring
How to I enable how to enable IP Pool monitoring in the Microsoft System Center Virtual Machine Manager Management? The IP Pools show up in the IP Address Pool Health dashboard, but the state is "Not Monitored". How to I get these to light up
as monitored?Hi,
Have you integrated VMM and SCOM?
Hope the links below could be helpful:
Operations Manager Integration and PRO Improvements in SCVMM 2012
http://blogs.technet.com/b/scvmm/archive/2011/04/14/operations-manager-integration-and-pro-improvements-in-scvmm-2012.aspx
Integrating VMM 2012 and OpsMgr 2012
http://blogs.technet.com/b/kevinholman/archive/2012/08/21/integrating-vmm-2012-and-opsmgr-2012.aspx
And please also search for "IP address Pool" under monitors or rules, hope you may find something related there.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
I recently installed Update Rollup 3 for System Center Data Protection Manager 2012 R2.
As part of the update I updated all DPM Agents, including the ones on our Hyper-V Servers (which are part of a cluster). I also rebooted every DPM Protected Servers. After reboot all Hyper-V Servers raise a warning that the VssNullProvider service has stopped.
Backup seems to work properly. I can start the VssNullProvider service manually. But after the next backup the service it is stopped again. Exactly the same issue occurs on our test Hyper-V Cluster. All our Hyper-V Servers run Windows Server 2012 R2 and
we use System Center Virtual Machine Manager 2012 R2.
Something is not ok with Update Rollup 3. Any suggestions?
Boudewijn Plomp, BPMi Infrastructure & Security
Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer".Hi
SEE NEW BLOG:
Support Tip Service Manager alert for the VSSNullProvider service after installing
DPM 2012 R2 UR3
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.
Thanks!
Boudewijn Plomp, BPMi Infrastructure & Security | Please remember, if you see a post that helped you please click "Vote as Helpful" and if it answered your question, please click "Mark as Answer". -
Microsoft System Center Data Protection Manager
Hi,
I have two DPM (2012r2)servers, one is member of the domain, second is workgroup configuration.
I installed Microsoft System Center Data Protection Manager, I have no problem connecting to DPM domain member.
Can I connect to the workgroup DPM server with System Center Data Protection Manager?
Thanks,
LiorHi
The DPM server itself must be a member of a domain. DPM will not work if the server is in a workgroup configuration.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights. -
System Center Enterprise Client Management
I read in an article that System Center Configuration Manager is now known as System Center Enterprise Client Management.
Is that true?Agreed, I've never heard of it outside of an internal re-labeling of System Center Configuration manager MVPs as instead being called Enterprise Client Management MVPs; as a way to indicate that it encompasses additional elements of client management, like
EP (Endpoint Protection), or Hybrid implementations of Intune with ConfigMgr. It's just a label, really.
Then again, how often do I still say "SMS"? lol, I'm an old-timer, I guess.
Standardize. Simplify. Automate. -
System Center Virtual Machine Manager 2012 R2 trial ISO - Technet Evaluation Center
Hello,
I have checked the Technet Evaluation Center for the System Center Virtual Machine Manager 2012 R2 - 180 days trial ISO but nowhere to be found.
I see that Microsoft has put a eval VHD on the following URL: http://www.microsoft.com/en-us/download/details.aspx?id=40843.
Microsoft: Can you please upload the: System Center Virtual Machine Manager 2012 R2 iso 180 day trial to the Technet Evaluation Center since you have cancelled the technet subscribtion :)
Thank you in advance
//Robert DiegoHi Sir,
System Center products were gathered in System Center products , you can download 12R2 VMM :
http://www.microsoft.com/en-us/evalcenter/evaluate-system-center-2012-r2
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] . -
Import System Center Monitoring Pack for System Center 2012 - Service Manager into SCOM 2007 R2
I would like to know if there is SCSM 2012 SP1 MP available for SCOM 2007 R2 ?
I downloaded the "System Center Monitoring Pack for System Center 2012 - Service Manager" MP from
http://www.microsoft.com/en-us/download/details.aspx?id=29980 and then import into SCOM 2007 R2, however, I found that there are some MP dependencies issue.
For example, the "Microsoft System Center Service Manager Library" MP requires "Microsoft SystemCenter Library" and "System.Health.Library" MPs of version 7.0.8427.0. Howerver, the "Microsoft SystemCenter Library"
and "System.Health.Library" MP in SCOM 2007 R2 is of version 6.1.7221.0Import Management Pack from DVD disk SCOM 2012 R2
SW_DVD5_Sys_Ctr_2012_R2_English_OpsMgr_MLF_X19-18307.ISO\ManagementPacks
Have a nice day !!! -
Configure Web console for existing "System center 2012 configuration manager R2"
How to configure Web console for existing "System center 2012 configuration manager R2"
There is no web console in ConfigMgr 2012. If you want a web console you have to look at third-party products.
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude -
System Monitoring with Solution Manager Ehp1
Hi,
I'm Tomas Piqueres, and I'm working in a VAR SAP with Solution Manager.
Recently, we installed Solution Manager Ehp1 and we are trying to configure it for System Monitoring. When I worked with Solution Manager SP17 I used to go to transaction RZ21 to add the system I wanted to monitoring and then put the SID and RFCs of the system.
Now with Solution Manager Ehp1, when I create the system in transaction RZ21, first I have to set the Component Type to Be Monitored and then the SID, Message Server Logon Group, the client and user are set automatically, and the password I've set to user CSMREG.
when I fill all the entries, I can see the RFCs used for the monitoring of the system. Those RFCs are set automatically:
<SID>_RZ20_COLLECT
<SID>_RZ20_ANALYZE
I can't edit those RFCs, so I have to create it manually. I check that RFCs destination works fine and both pass the authorization test, so when I try to save the system at transaction RZ21, I see the following errors:
<SID>_RZ20_COLLECT_123539Error when opening an RFC connection
Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function: Error when opening an RFC connection
Error during remote call of SALC function: Error when opening an RFC connection
Error during remote call of RFC1 function: Error when opening an RFC connection
I've been looking for information about those errors and how to monitoring with Solution Manager Ehp1, but I haven't found anything usefull.
Please, Could you help me?
Thanks and regards,
Tomas.Tomas,
I need to configure EWA from my Solman system and I completed the steps (defining and creation of RFC destinations to the target systems from my Solman system). I downloaded the lates ccmsagent file from the market place based my target system configurations.
Herewith attaching the logs while I'm trying to check the profile parameter.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sappfpar check pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
== Checking profile: /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
================================================================================
***WARNING: Unexpected parameter: DIR_EPS =/usr/sap/trans/EPS/----
***WARNING: Unexpected parameter: SAPSECULIB =/usr/sap/TQA/SYS/exe/run/libsapsecu.o
***WARNING: Unexpected parameter: abap/buffersize_part1 =1200000
***WARNING: Unexpected parameter: auth/auth_number_in_userbuffer =5000
***WARNING: Unexpected parameter: dbs/io_buf_size =100000
***WARNING: Unexpected parameter: rsau/local/file =/usr/sap/TQA/DVEBMGS30/log/audit/audit_++++++++
***WARNING: Unexpected parameter: rsau/selector1/class =35
***WARNING: Unexpected parameter: rsau/selector1/severity =2
***WARNING: Unexpected parameter: rsdb/rclu/cachelimt =0
***ERROR: Size of shared memory pool 40 too small
================================================================
SOLUTIONS: (1) Locate shared memory segments outside of pool 40
with parameters like: ipc/shm_psize_<key> =0
SOLUTION: Increase size of shared memory pool 40
with parameter: ipc/shm_psize_40 =1472000000
Shared memory disposition overview
================================================================
Shared memory pools
Key: 10 Pool
Size configured.....: 642000000 ( 612.3 MB)
Size min. estimated.: 637597428 ( 608.1 MB)
Advised Size........: 640000000 ( 610.4 MB)
Key: 40 Pool for database buffers
Size configured.....: 1048000000 ( 999.4 MB)
Size min. estimated.: 1468229308 (1400.2 MB)
Advised Size........: 1472000000 (1403.8 MB)
Shared memories inside of pool 10
Key: 1 Size: 2500 ( 0.0 MB) System administration
Key: 4 Size: 523648 ( 0.5 MB) statistic area
Key: 7 Size: 14838 ( 0.0 MB) Update task administration
Key: 8 Size: 67108964 ( 64.0 MB) Paging buffer
Key: 9 Size: 134217828 ( 128.0 MB) Roll buffer
Key: 11 Size: 500000 ( 0.5 MB) Factory calender buffer
Key: 12 Size: 6000000 ( 5.7 MB) TemSe Char-Code convert Buf.
Key: 13 Size: 200500000 ( 191.2 MB) Alert Area
Key: 16 Size: 22400 ( 0.0 MB) Semaphore activity monitoring
Key: 17 Size: 2672386 ( 2.5 MB) Roll administration
Key: 30 Size: 37888 ( 0.0 MB) Taskhandler runtime admin.
Key: 31 Size: 4806000 ( 4.6 MB) Dispatcher request queue
Key: 33 Size: 39936000 ( 38.1 MB) Table buffer, part.buffering
Key: 34 Size: 20480000 ( 19.5 MB) Enqueue table
Key: 51 Size: 3200000 ( 3.1 MB) Extended memory admin.
Key: 52 Size: 40000 ( 0.0 MB) Message Server buffer
Key: 54 Size: 20488192 ( 19.5 MB) Export/Import buffer
Key: 55 Size: 8192 ( 0.0 MB) Spool local printer+joblist
Key: 57 Size: 1048576 ( 1.0 MB) Profilparameter in shared mem
Key: 58 Size: 4096 ( 0.0 MB) Enqueue ID for reset
Key: 62 Size: 85983232 ( 82.0 MB) Memory pipes
Shared memories inside of pool 40
Key: 2 Size: 31168040 ( 29.7 MB) Disp. administration tables
Key: 3 Size: 114048000 ( 108.8 MB) Disp. communication areas
Key: 6 Size: 1064960000 (1015.6 MB) ABAP program buffer
Key: 14 Size: 28600000 ( 27.3 MB) Presentation buffer
Key: 19 Size: 90000000 ( 85.8 MB) Table-buffer
Key: 42 Size: 13920992 ( 13.3 MB) DB TTAB buffer
Key: 43 Size: 43422392 ( 41.4 MB) DB FTAB buffer
Key: 44 Size: 8606392 ( 8.2 MB) DB IREC buffer
Key: 45 Size: 6558392 ( 6.3 MB) DB short nametab buffer
Key: 46 Size: 20480 ( 0.0 MB) DB sync table
Key: 47 Size: 13313024 ( 12.7 MB) DB CUA buffer
Key: 48 Size: 300000 ( 0.3 MB) Number range buffer
Key: 49 Size: 3309932 ( 3.2 MB) Spool admin (SpoolWP+DiaWP)
Shared memories outside of pools
Key: 18 Size: 1792100 ( 1.7 MB) Paging adminitration
Key: 41 Size: 25010000 ( 23.9 MB) DB statistics buffer
Key: 63 Size: 409600 ( 0.4 MB) ICMAN shared memory
Key: 64 Size: 4202496 ( 4.0 MB) Online Text Repository Buf.
Key: 65 Size: 4202496 ( 4.0 MB) Export/Import Shared Memory
Key: 1002 Size: 400000 ( 0.4 MB) Performance monitoring V01.0
Key: 58900130 Size: 4096 ( 0.0 MB) SCSA area
Nr of operating system shared memory segments: 9
Shared memory resource requirements estimated
================================================================
Nr of shared memory descriptors required for
Extended Memory Management (unnamed mapped file).: 64
Total Nr of shared segments required.....: 73
System-imposed number of shared memories.: 1000
Shared memory segment size required min..: 1472000000 (1403.8 MB)
System-imposed maximum segment size......: 35184372088832 (33554432.0 MB)
Swap space requirements estimated
================================================
Shared memory....................: 2050.4 MB
..in pool 10 608.1 MB, 99% used
..in pool 40 999.4 MB, 140% used !!
..not in pool: 34.4 MB
Processes........................: 716.8 MB
Extended Memory .................: 8192.0 MB
Total, minimum requirement.......: 10959.2 MB
Process local heaps, worst case..: 1907.3 MB
Total, worst case requirement....: 12866.5 MB
Errors detected..................: 1
Warnings detected................: 9
After checking the profile parameter I tried to run sapccm4x in /run directory but got the below error and I'm not able tomove further.
Pls have a look at these two and let me know what could I do to proceed further.
tqaadm@saptqa01:/usr/sap/TQA/SYS/exe/run 5> sapccm4x -R pf=/usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO: CCMS agent sapccm4x working directory is /usr/sap/TQA/DVEBMGS30/log/sapccm4x
INFO: CCMS agent sapccm4x config file is /usr/sap/TQA/DVEBMGS30/log/sapccm4x/csmconf
INFO: Central Monitoring System is [SMP]. (found in config file)
additional CENTRAL system y/[n] ? :
INFO: found ini file /usr/sap/TQA/DVEBMGS30/log/sapccm4x/sapccmsr.ini.
INFO:
CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
compiled at Jun 28 2010
systemid 324 (IBM RS/6000 with AIX)
relno 6400
patch text patch collection 2010/1, OSS note 1304480
patchno 335
INFO Runtime:
running on saptqa01 AIX 3 5 00069A8FD600
running with profile /usr/sap/TQA/SYS/profile/TQA_DVEBMGS30_saptqa01
INFO profile parameters:
alert/MONI_SEGM_SIZE = 200000000
alert/TRACE = 1
SAPSYSTEM = 30
SAPSYSTEMNAME = TQA
SAPLOCALHOST = saptqa01
DIR_CCMS = /usr/sap/ccms
DIR_LOGGING = /usr/sap/TQA/DVEBMGS30/log
DIR_PERF = /usr/sap/tmp
INFO:
pid 4165682
INFO: Attached to Shared Memory Key 13 (size 200141728) in pool 10
INFO: Connected to Monitoring Segment [CCMS Monitoring Segment for application server saptqa01_TQA_30, created with version CCMS version 20040229, 64 bit single threaded, compiled at Oct 3 2008, kernel 6400_20020600_254, platform 324 (IBM RS/6000 with AIX)]
segment status ENABLED
segment started at Tue Sep 14 09:35:56 2010
segment version 20040229
ERROR: Shared Memory misconfiguration ==> can not monitor SAP application server saptqa01_TQA_30
Dispatcher Admin Shared Memory (Key 01) and CCMS Shared Memory (Key 13) both in pool 10.
Please change configuration with profile parameters
ipc/shm_psize_01 = -<different pool nr>
xor
ipc/shm_psize_13 = -<different pool nr>
EXITING with code 1
Maybe you are looking for
-
I've got a macbook and its almost new i havent used it much now i am trying to open it but its stuck in apple logo please help
-
I Just tried to play a movie off of my iPhone 6 plus ios 8.1 on my tv using the hdmi adapter, the movie plays for about 2 secs and then tells me the device is not authorized to play protected movies.. I have power rebooted my phone closed everything
-
I've been following these instructions - http://discussions.apple.com/thread.jspa?threadID=1431891&tstart=150 - to stretch a video back to widescreen after it gets "squished" when I export it from FCE to a quicktime file. I had been using the dimensi
-
How do you close down the internet in ISO7
-
Hi Expert. I'm a SAP portal Webdynpro Java consultant. and I'm facing the upload file's request at portal. So, Is this possible since The portal have the KM function disable? Did you know any paper, forum, wiki or tutorial where I could find some sta